AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000) | |
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements (ISO 15186-2:2003) | |
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies (ISO 15186-3:2002) | |
| Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) | |
| Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) | |
| AGRICULTURAL AND FORESTRY MACHINES. ELECTROMAGNETIC COMPATIBILITY. TEST METHODS AND ACCEPTANCE CRITERIA. (ISO 14982:1998). | |
| Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty. (ISO 14956:2002) | |
| Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2003) | |
| Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) | |
| Animal and vegetable fats and oils - Determination of benzo[a]pyrene - Reverse-phase high performance liquid chromatography method (ISO 15302:2007) | |
| Animal and vegetable fats and oils - Determination of benzo[a]pyrene - Reverse-phase high performance liquid chromatography method (ISO 15302:2017) | |
| Animal and vegetable fats and oils - Determination of benzo[a]pyrene content - Reverse-phase high-performance liquid chromatography method (ISO 15302:1998) | |
| Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001/Cor 1:2007) | |
| Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method. (ISO 15301:2001) | |
| Animal feeding stuffs - Determination of carbadox content - Method using high-performance liquid chromatography. (ISO 14939:2001) | |
| Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products. (ISO 14902:2001) | |
| Cathodic protection - Competence levels of cathodic protection persons - Basis for certification scheme (ISO 15257:2017) | |
| Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) (Endorsed by AENOR in January of 2012.)... | |
| Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003) | |
| Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003/Cor.1:2 004) | |
| Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2019, Corrected version 2020-06) | |
| Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2022) | |
| Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004) | |
| Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2025) | |
| Cleanrooms and associated controlled environments - Part 6: Vocabulary (ISO 14644-6:2007) | |
| Cleanrooms and associated controlled environments - Part 8: Assessment of air cleanliness by chemical concentration (ACC) (ISO 14644-8:2022) | |
| Cleanrooms and associated controlled environments - Part 8: Classification of air cleanliness by chemical concentration (ACC) (ISO 14644-8:2013) | |
| Cleanrooms and associated controlled environments - Part 8: Classification of airborne molecular contamination (ISO 14644-8:2006) | |
| Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022) | |
| Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) | |
| Cleanrooms and associated controlled environments. Bicontamination control. Part 1: General principles and methods (ISO 14698-1:2003) | |
| Cleanrooms and associated controlled environments. Part 4: Design, construction and start-up. (ISO 14644-4:2001) | |
| Cleanrooms and associated controlled environments. Part 7: Separative enclosures (clean air hoods, gloveboxes, isolators, mini-environments) (ISO 14644-7:2004) | |
| Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use (ISO 14890:2003) | |
| Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013) (Endorsed by AENOR in April of 2013.) | |
| Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2026) (Endorsed by Asociación Española de Normalización in April of 2026.) | |
| Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005) (Endorsed by AENOR in August of 2006.) | |
| Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005) | |
| Dental elevators - Part 1: General requirements (ISO 15087-1:1999) | |
| Dental elevators - Part 2: Warwick James elevators. (ISO 15087-2:2000) | |
| Dental elevators - Part 3: Cryer elevators. (ISO 15087-3:2000) | |
| Dental elevators - Part 4: Coupland elevators. (ISO 15087-4:2000) | |
| Dental elevators - Part 5: Bein elevators. (ISO 15087-5:2000) | |
| Dental elevators - Part 6: Flohr elevators. (ISO 15087-6:2000) | |
| DENTAL IMPLANTS. PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS. CONTENTS OF TECHNICAL FILE (ISO 14727:1998) | |
| Dental tweezers - Part 1: General requirements (ISO 15098-1:2000) | |
| Dental tweezers - Part 2: Meriam types. (ISO 15098-2:2000) | |
| Dental tweezers - Part 3: College types. (ISO 15098-3:2000) | |
| Dentistry - Dental elevators (ISO 15087:2025) (Endorsed by Asociación Española de Normalización in December of 2025.) | |
| Dentistry - Dental tweezers (ISO 15098:2020) (Endorsed by Asociación Española de Normalización in June of 2020.) | |
| Dentistry - Dental tweezers (ISO 15098:2024) (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| Dentistry - Fatigue test for endosseous dental implants (ISO 14801:2003) | |
| Dentistry - Implants - Dynamic fatigue test for endosseous dental implants (ISO 14801:2007) | |
| Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016) | |
| Determination of flash point. Closed cup equilibrium method (ISO 1523:2002). | |
| Determination of flash/no flash. Closed cup equilibrium method (ISO 1516:2002) | |
| Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide (ISO 14855:1999) | |
| Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:1999) | |
| Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2018) | |
| Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:2021) | |
| Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer (ISO 14851:1999) | |
| Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer (ISO 14851:2019) | |
| Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2005) | |
| Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2005/Cor 1:2009) | |
| Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2012) | |
| Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved... | |
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1:Pumps (ISO 15136-1:2001). (Endorsed by AENOR in March of 2002.) | |
| Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2011) (Endorsed by AENOR in December of 2011.) | |
| Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2018) (Endorsed by Asociación Española de Normalización in March of 2019.) | |
| Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2022) (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| Electronic fee collection - Application interface definition for dedicated short-range communication - Amendment 1 (ISO 14906:2011/Amd 1:2015) (Endorsed by AENOR in September of 2015.) | |
| Electronic fee collection - Application interface definition for dedicated short-range communication - Amendment 1 (ISO 14906:2018/Amd 1:2020) (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Electronic fee collection - Application interface definition for dedicated short-range communication - Technical Corrigendum 1 (ISO 14906:2011/Cor 1:2013) (Endorsed by AENOR in May of 2013.) | |
| Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO 14907-1:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)... | |
| Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO 14907-2:2021) (Endorsed by Asociación Española de Normalización... | |
| Ergonomics of the thermal environment - Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions (ISO 15265:2004) | |
| EXTRUDED SHEETS OF POLYPROPYLENE (PP) - REQUIREMENTS AND TEST METHODS (ISO 15013:1998) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016) (Endorsed by Asociación Española de Normalización in March of 2021.)... | |
| Fishing nets - Description and designation of knotted netting (ISO 1530:2003) | |
| Flow control devices for connection to a medical gas supply system (ISO 15002:2023) (Endorsed by Asociación Española de Normalización in May of 2024.) | |
| Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008) | |
| Flow-metering devices for connection to terminal units of medical gas pipeline systems - Amendment 1 (ISO 15002:2008/Amd 1:2018) | |
| Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 1: High performance liquid chromatographic method with silica gel clean up (ISO 15141-1:1998) | |
| Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 2: High performance liquid chromatographic method with bicarbonate clean up (ISO 15141-2:1998) | |
| Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003) | |
| Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003/Cor 1:2006) | |
| Gas analysis - Conversion of gas mixture composition data (ISO 14912:2025) | |
| Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001) | |
| Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001/Amd 1:2013) | |
| Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021) | |
| Gas cylinders - Parallel threads for connection of valves to gas cylinders- Part 2: Gauge inspection. (ISO 15245-2:2001) | |
| Gas welding equipment - Vocabulary (ISO 15296:2017) | |
| Geometrical Product Specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2006) | |
| Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2006/Cor 1:2008) | |
| Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018) | |
| Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999)... | |
| GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES- PART 1: GENERAL TERMS AND DEFINITIONS. (ISO 14660-1:1999) | |
| Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description (ISO 14689-1:2003) | |
| Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002) | |
| Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2017) | |
| Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description - Amendment 1 (ISO 14688-1:2002/Amd 1:2013) | |
| Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2004) | |
| Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2017) | |
| Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification - Amendment 1 (ISO 14688-2:2004/Amd 1:2013) | |
| Geotechnical investigation and testing - Identification, description and classification of rock (ISO 14689:2017) | |
| Geotechnical investigation and testing. Identification and classification of soil. Part 1: Identification and description. (ISO 14688-1:2002) | |
| Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013)... | |
| Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of... | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide... | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009) | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2006) | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017) | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets - Amendment 1 (ISO 15011-4:2006/Amd 1:2008) | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products... | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except... | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3: Determination of ozone concentration using fixed point... | |
| Health and safety in welding and allied processes - Requirements testing and marking of equipment for air filtration - Part 1: Testing of the separation efficiency for welding fume (ISO... | |
| Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of... | |
| Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Part 1: Determination of emission rate and sampling for analysis of... | |
| Hexagon head tapping screws (ISO 1479:2011) | |
| HEXAGON HEAD TAPPING SCREWS. (ISO 1479:1983). | |
| Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002) | |
| Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion - Amendment 1 (ISO 15148:2002/Amd 1:2016) | |
| Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) | |
| Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) | |
| Immersion suits - Part 2: Abandonment suits, requirements including safety. (ISO 15027-2:2002) | |
| Immersion suits - Part 3: Test methods (ISO 15027-3:2012) | |
| Immersion suits - Part 3: Test methods. (ISO 15027-3:2002) | |
| Implants for surgery - Active implantable medical devices - Part 2: Cardiac pacemakers (ISO 14708-2:2019) | |
| Implants for surgery - Active implantable medical devices - Part 3: Implantable neurostimulators (ISO 14708-3:2017) | |
| Implants for surgery - Active implantable medical devices - Part 4: Implantable infusion pump systems (ISO 14708-4:2022) | |
| Implants for surgery - Active implantable medical devices - Part 5: Circulatory support devices (ISO 14708-5:2020) | |
| Implants for surgery - Active implantable medical devices - Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) (ISO 14708-6:2019) | |
| Implants for surgery - Active implantable medical devices - Part 7: Particular requirements for cochlear and auditory brainstem implant systems (ISO 14708-7:2019) | |
| In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) | |
| In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) | |
| In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2003) | |
| In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) | |
| Inmersion suits - Part 1: Constant wear suits, requirements including safety. (ISO 15027-1:2002) | |
| Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO 14881:2001) | |
| Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO 14881:2021) (Endorsed by Asociación Española de Normalización in December of 2021.) | |
| Intelligent transport systems - Geographic Data Files (GDF) - GDF5.0 (ISO 14825:2011) (Endorsed by AENOR in October of 2011.) | |
| Intelligent transport systems - Geographic Data Files (GDF) - Overall data specification (ISO 14825:2004) (Endorsed by AENOR in May of 2004.) | |
| Intelligent transport systems - Geographic Data Files (GDF) - Overall data specification (ISO 14825:2004) | |
| Intelligent transport systems - Graphic data dictionary (ISO 14823:2017) (Endorsed by Asociación Española de Normalización in July of 2017.) | |
| Intelligent transport systems - Graphic data dictionary - Part 1: Specification (ISO 14823-1:2024) (Endorsed by Asociación Española de Normalización in July of 2024.) | |
| Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO... | |
| Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2: Event and information codes for Radio Data System - Traffic Message Channel (RDS-TMC) using... | |
| Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2: Event and information codes for Radio Data System-Traffic Message Channel (RDS-TMC) using ALERT-C (ISO... | |
| Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 3: Location referencing for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO... | |
| Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003) | |
| Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018) | |
| Leather - Guide to the selection of leather for apparel (excluding furs) (ISO 14931:2004) | |
| Leather - Guide to the selection of leather for apparel (excluding furs) (ISO 14931:2015) | |
| Leather - Leather for apparel (excluding furs) - Specifications and sampling procedures (ISO 14931:2021) | |
| Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology (ISO 14798:2009) | |
| Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012) (Endorsed by AENOR in February of 2013.) | |
| LIGHT CONVEYOR BELTS. TOLERANCES ON WIDTHS AND LENGTHS OF CUT LIGHT CONVEYOR BELTS (ISO 15147:1999) | |
| Manipulating industrial robots. Graphical user interfaces for programming and operation of robots (GUI-R) (ISO 15187:2000) | |
| Medical devices - Application of risk management to medical devices (ISO 14971:2007) | |
| Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) | |
| Medical devices - Application of risk management to medical devices (ISO 14971:2019) | |
| Medical devices - Application of risk management to medical devices - Amendment 1: Rationale for requirements (ISO 14971:2000/AM1:2003) | |
| Medical devices - Application of risk management to medical devices. (ISO 14971:2000) | |
| Medical devices - Quality management - Medical device nomenclature data structure (ISO 15225:2016) | |
| Medical devices - Quality management - Medical device nomenclature data structure (ISO/FDIS 15225:2009) | |
| Medical devices - Symbols to be used with information to be supplied by the manufacturer - Part 1: General requirements (ISO 15223-1:2021) | |
| Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO 15223-1:2012) | |
| Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO 15223-1:2016, Corrected version 2017-03) | |
| Medical laboratories - Particular requirements for quality and competence (ISO 15189:2003) | |
| Medical laboratories - Particular requirements for quality and competence (ISO 15189:2007) | |
| Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) | |
| Medical laboratories - Requirements for quality and competence (ISO 15189:2022) | |
| Medical laboratories - Requirements for quality and competence | |
| Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test (ISO 14647:2000) | |
| Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009) | |
| Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) | |
| Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2008) | |
| Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016) | |
| Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008) | |
| Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) | |
| Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification (ISO 15216-1:2017) | |
| Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification - Amendment 1 (ISO 15216-1:2017/Amd... | |
| Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 2: Method for detection (ISO 15216-2:2019) | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Clostridium spp. - Part 1: Enumeration of sulfite-reducing Clostridium spp. by colony-count technique (ISO 15213-1:2023) | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Clostridium spp. - Part 2: Enumeration of Clostridium perfringens by colony-count technique (ISO 15213-2:2023) | |
| Milk and milk products - Determination of nitrate and nitrate contents - Part 1: Method using cadmium reduction and spectrometry (ISO 14673-1:2004) | |
| Milk and milk products - Determination of nitrate and nitrate contents - Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) (ISO 14673-3:2004) | |
| Milk and milk products - Determination of nitrate and nitrite contents - Part 1: Method using cadmium reduction and spectrometry. (ISO 14673-1:2001) | |
| Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method) (ISO 14673-2:2004) | |
| Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method). (ISO 14673-2:2001) | |
| Milk and milk products - Determination of nitrate and nitrite contents - Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method). (ISO14673-3:2001) | |
| Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle. (ISO 14891:2002) | |
| Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M1 content. (ISO 14675:2003) | |
| Milk, milk products, infant formula and adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method (ISO 15151:2018) | |
| Natural gas - Energy determination (ISO 15112:2011) | |
| Natural gas - Energy determination (ISO 15112:2018) | |
| Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange (ISO 15225:2000/Amd 1:2004) | |
| Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange - Amendment 1 (ISO 15225:2000/A1:2004) | |
| Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange. (ISO 15225:2000) | |
| Oil and gas industries including lower carbon energy - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2025) (Endorsed by Asociación Española de Normalización in August of 2025.) | |
| OPHTHALMIC INSTRUCMENTS. FUNDAMENTAL REQUIREMENTS AND TEST METHODS. (ISO 15004:1997). | |
| Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006) | |
| Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020) | |
| Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-2:2007) | |
| Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-2:2024) (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| Ophthalmic optics - Contact lens care products - Antimicrobial preservative efficacy testing and guidance on determining discard date (ISO 14730:2014) | |
| Ophthalmic optics - Contact lens care products - Antimicrobial preservative efficacy testing and guidance on determining discard date. (ISO 14730:2000) | |
| Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses - Amendment 1 (ISO 14729:2001/Amd 1:2010) | |
| Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses. (ISO 14729:2001) | |
| Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:2003) | |
| Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:2013) | |
| Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:2025) | |
| Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision (ISO 15254:2009) | |
| Ophthalmic optics and instruments - Optical and electro-optical devices for enhancing low vision (ISO 15253:2021) (Endorsed by Asociación Española de Normalización in September of 2021.) | |
| Ophthalmic optics and instruments - Optical devices for enhancing low vision. (ISO 15253:2000) | |
| Ophthalmic optics and instruments. Electro-optical devices for enhancing low vision. (ISO 15254:2002) | |
| OPHTHALMIC OPTICS. SPECTACLE LENSES. FUNDAMENTAL REQUIREMENTS FOR UNCUT FINISHED LENSES. (ISO 14889:1997). | |
| Optics and phonotics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2006) | |
| Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2001/Cor 1:2003/Cor 2:2005) | |
| Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019) (Endorsed by Asociación Española de Normalización in August of 2019.) | |
| Optics and photonics - Microlens arrays - Part 1: Vocabulary and general properties (ISO 14880-1:2016) (Endorsed by AENOR in October of 2016.) | |
| Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006) | |
| Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2024) (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2024) (Endorsed by Asociación Española de Normalización in December of 2024.)... | |
| Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) | |
| Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2024) (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Optics and photonics. Microlens array - Part 1: Vocabulary (ISO 14880-1:2001, including Corrigendum 1:2004) | |
| Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998/Cor 1:2008) | |
| Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002/Cor 1:2008) | |
| OSCILLATION-TYPE DENSITY METERS. PART 1: LABORATORY INSTRUMENTS (ISO 15212-1:1999) | |
| Osscilation-type density meters. Part 2: Process instruments for homogenous liquids. (ISO 15212-2:2002) | |
| Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000) | |
| Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2013) | |
| Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017) | |
| Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) | |
| Paints and varnishes - Bend test (cylindrical mandrel). (ISO 1519:2002) | |
| Paints and varnishes - Cupping test (ISO 1520:2006) | |
| Paints and varnishes - Cupping test. (ISO 1520:1999) | |
| Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012) | |
| Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019) | |
| Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2012) | |
| Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2020) | |
| Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) (Endorsed by AENOR in October of 2006.) | |
| Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) | |
| Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000) (Endorsed by AENOR in October of 2006.) | |
| Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000) | |
| Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) (Endorsed by AENOR in October of 2006.) | |
| Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2000) | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO... | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithioc arbamate) (zineb) release rate by determination of the concentration... | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylbo rane (PTPB) concentration in the extract and calculation of the release... | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of... | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract... | |
| Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) | |
| Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2019) | |
| Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2023) | |
| Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011) | |
| Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2019) | |
| Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) | |
| Paints and varnishes - Pendulum damping test (ISO 1522:2006) | |
| Paints and varnishes - Pendulum damping test (ISO 1522:2022) | |
| Paints and varnishes - Standard panels for testing (ISO 1514:2004) | |
| Paints and varnishes - Standard panels for testing (ISO 1514:2016) | |
| Paints and varnishes - Standard panels for testing (ISO 1514:2024) | |
| Paints and varnishes - Testing of formaldehyde-emittin g coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) | |
| PAINTS AND VARNISHES. BEND TEST (CYLINDRICAL MADREL). (ISO 1519:1973). | |
| PAINTS AND VARNISHES. CUPPING TEST. (ISO 1520:1973). | |
| PAINTS AND VARNISHES. EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING. (ISO 1513:1992). | |
| Paints and varnishes. Pendulum damping test. (ISO 1522:1998). | |
| Paints and varnishes. Scratch test. (ISO 1518:1992). | |
| PAINTS AND VARNISHES. STANDARDS PANELS FOR TESTING. (ISO 1514:1993). | |
| PAINTS AND VARNISHES. SURFACE-DRYING TEST. BALLOTINI METHOD. (ISO 1517:1973). | |
| Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) | |
| Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2020) | |
| Paints, varnishes and printing inks - Determination of fineness of grind. (ISO 1524: 2000) | |
| Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) (Endorsed by AENOR in September of 2013.) | |
| Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003) (Endorsed by AENOR in March of 2004.) | |
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999) (Endorsed by AENOR in December of 2000.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002) (Endorsed by AENOR in March of 2003.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)... | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002) (Endorsed by AENOR in March of 2003.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002/Cor.1:2 005) (Endorsed by AENOR in April of 2006.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002) (Endorsed by AENOR in March of 2003.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002/Cor.1:2 005) (Endorsed by AENOR in April of 2006.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017) (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002) (Endorsed by AENOR in March of 2003.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002/Cor 1:2006) (Endorsed by AENOR in October of 2007.) | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017) (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001/Cor.1:2 005)... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2009) (Endorsed... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2015) (Endorsed... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2020) (Endorsed... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1:General principles for selection of cracking-resistant materials (ISO 15156-1:2001) (Endorsed by... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2009) (Endorsed... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) (Endorsed... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2020) (Endorsed... | |
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) (Endorsed by AENOR in February of 2008.) | |
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2018) (Endorsed by Asociación Española de Normalización in August of 2018.) | |
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning. (ISO 15138:2000) (Endorsed by AENOR in October of 2001.) | |
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning. (ISO 15138:2000/COR.1:200 1). (Endorsed by AENOR in September of 2002.) | |
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009) (Endorsed by AENOR in September of 2009.) | |
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) (Endorsed by AENOR in January of 2010.) | |
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) (Endorsed by AENOR in July of 2006.) | |
| Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves (ISO 14723:2000) (Endorsed by AENOR in March of 2002.) | |
| Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids (ISO 14935:1998) | |
| Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids (ISO 14935:2020) | |
| PETROLEUM AND RELATED PRODUCTS. DETERMINATION OF SPRAY IGNITION CHARACTERISTICS OF FIRE-RESISTANT FLUIDS. PART 1: SPRAY FLAME PERSISTENCE. HOLLOW-CONE NOZZLE METHOD. (ISO 15029-1:1999) | |
| Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications (ISO 14691:2008) (Endorsed by AENOR in January of 2009.) | |
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use... | |
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003)... | |
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003/Cor.1:2... | |
| Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016) | |
| PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCs) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (ISO 15252-1:1999) | |
| PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCs) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (ISO 15252-2:1999). | |
| PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCs) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS. (ISO 15252-3:1999) | |
| Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 14663-1:1999) | |
| Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999) | |
| Plastics - Extruded sheets of impact-modified acrylonitrile-styren e copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2007) | |
| Plastics - Extruded sheets of impact-modified acrylonitrile-styren e copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) | |
| Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007) | |
| Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2022) | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method (ISO 15106-1:2003) | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003) | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003) | |
| Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 15103-1:2000) | |
| Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2000) | |
| Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007) | |
| Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2001) | |
| Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017) | |
| Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties (ISO 15023-2:2003) | |
| Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties (ISO 15023-2:2019) | |
| Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009) | |
| Plastics - Polyurethane raw materials - Determination of isocyanate content. (ISO 14896:2000) | |
| Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 14910-1:2013) | |
| Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications (ISO 14910-1:1997) | |
| Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:1997) | |
| Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) | |
| PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES. ZINC AND ALUMINIUM COATINGS. GUIDELINES (ISO 14713:1999) | |
| Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) (Endorsed by Asociación Española de Normalización in February of 2017.) | |
| Protective clothing - Protection against heat and flame - Method of test for limited flame spread (ISO 15025:2000) | |
| Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) | |
| Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2006) | |
| Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2018) | |
| Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017) | |
| Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2025) | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure (ISO 14816:2005) (Endorsed by AENOR in April of 2006.) | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure - Amendment 1 (ISO 14816:2005/Amd 1:2019) (Endorsed by Asociación Española de Normalización in June... | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - Reference architecture and terminology (ISO 14814:2006) (Endorsed by AENOR in July of 2006.) | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications (ISO 14815:2005) | |
| Road transport and traffic telematics - Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2004) (Endorsed by AENOR in August of 2006.) | |
| Road transport and traffic telematics - Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2004) | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures (ISO 15005:2002) | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation (ISO 15006:2004) | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation (ISO 15008:2003) | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation (ISO 15008:2009) | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation (ISO 15008:2017) | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011) (Endorsed by AENOR in December of 2011.) | |
| Road vehicles - Ergonomic aspects of transportation and control systems - Dialogue management principles and compliance procedures (ISO 15005:2017) | |
| Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014) | |
| Road vehicles - Vehicle to grid communication interface - Part 10: Physical layer and data link layer requirements for single-pair Ethernet (ISO 15118-10:2025) (Endorsed by Asociación Española de Normalización in... | |
| Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO 15118-1:2013) | |
| Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO 15118-1:2019) | |
| Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements (ISO 15118-20:2022) (Endorsed by Asociación Española de Normalización in July of... | |
| Road vehicles - Vehicle to grid communication interface - Part 21: Common 2nd generation network layer and application layer requirements conformance test plan (ISO 15118-21:2025) (Endorsed by Asociación Española de... | |
| Road vehicles - Vehicle to grid Communication interface - Part 3: Physical and data link layer requirements (ISO 15118-3:2015) (Endorsed by AENOR in August of 2016.) | |
| Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO 15118-4:2018) (Endorsed by Asociación Española de Normalización in April of 2019.) | |
| Road vehicles - Vehicle to grid communication interface - Part 5: Physical layer and data link layer conformance test (ISO 15118-5:2018) (Endorsed by Asociación Española de Normalización in April of... | |
| Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2018) (Endorsed by Asociación Española de Normalización in... | |
| Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2020) (Endorsed by Asociación Española de Normalización in... | |
| Road vehicles - Vehicle to grid communication interface - Part 9: Physical and data link layer conformance test for wireless communication (ISO 15118-9:2022) (Endorsed by Asociación Española de Normalización in... | |
| Road vehicles - Vehicle-to-grid communication Interface - Part 2: Network and application protocol requirements (ISO 15118-2:2014) (Endorsed by AENOR in August of 2016.) | |
| Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 1: Definitions and parameters ( ISO 15007-1:2002) | |
| ROTARY POSITIVE DISPLACEMENT PUMPS. TECHNICAL REQUIREMENTS (ISO 14847:1999) | |
| Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002) | |
| Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) | |
| Safety of machinery - Anthropometric requirements for the design of workstations at machinery. (ISO 14738:2002) | |
| Ships and marine technology- Identification colours for the content of piping systems- Part 1: Main colours and media. (ISO 14726-1:1999) | |
| SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (COMMON HEAD STYLE). (ISO 1482:1983). | |
| Slotted countersunk (flat) head tapping screws (ISO 1482:2011) | |
| Slotted pan head tapping screws (ISO 1481:2011) | |
| SLOTTED PAN HEAD TAPPING SCREWS. (ISO 1481:1983). | |
| SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (COMMON HEAD STYLE). (ISO 1483:1983). | |
| Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) | |
| Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003) | |
| Small craft - Bilge pumping system (ISO 15083:2003). | |
| Small craft - Bilge-pumping systems (ISO 15083:2003) | |
| Small craft - Bilge-pumping systems (ISO 15083:2020) | |
| Small craft - Bilge-pumping systems - Amendment 1 (ISO 15083:2020/Amd 1:2022) | |
| Small craft - Bilge-pumping systems | |
| Small craft - Builder's plate (ISO 14945:2004) | |
| Small craft - Builder's plate (ISO 14945:2021) | |
| Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016) | |
| Small craft - Liquid-fuelled galley stoves. (ISO 14895:2000) | |
| Small craft - Man-overboard prevention and recovery (ISO 15085:2003) | |
| Small craft - Man-overboard prevention and recovery - Amendment 1 (ISO 15085:2003/Amd 1:2009) | |
| Small craft - Man-overboard prevention and recovery - Amendment 2 (ISO 15085:2003/Amd 2:2017) | |
| Small craft - Maximum load capacity (ISO 14946:2001) | |
| Small craft - Maximum load capacity (ISO 14946:2021) | |
| Small craft - Maximum load capacity. (ISO 14946:2001) | |
| Small craft - Protection from falling overboard and means of reboarding (ISO 15085:2024) (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| Small craft. Anchoring, mooring and towing - Strong points (ISO 15084:2003) | |
| Software ergonomics for multimedia user interfaces - Part 2: Multimedia navigation and control (ISO 14915-2:2003) | |
| Sofware ergonomics for multimedia user interfaces - Part 1: Desing principles and framework (ISO 14915-1:2002) | |
| Sofware ergonomics for multimedia user interfaces - Part 3: Media selection and combination. (ISO 14915-3:2002) | |
| Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection (ISO 15192:2021) (Endorsed by Asociación Española de Normalización in September of... | |
| Soil and waste - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection (ISO 15192:2025) (Endorsed by Asociación Española de Normalización in November of... | |
| Soil quality - Characterization of contaminated soil related to groundwater protection (ISO 15175:2018) (Endorsed by Asociación Española de Normalización in February of 2019.) | |
| Soil quality - Characterization of soil related to groundwater protection (ISO 15175:2004) | |
| Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption (ISO 15009:2012) (Endorsed by AENOR in... | |
| Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption (ISO 15009:2016) (Endorsed by AENOR in... | |
| Solid biofuels - Sample preparation (ISO 14780:2017) | |
| Solid biofuels - Sample preparation - Amendment 1 (ISO 14780:2017/Amd 1:2019) | |
| Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2005) | |
| Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016) | |
| Steel cord conveyor belts - Part 2: Preferred belt types (ISO 15236-2:2004) | |
| Steel cord conveyor belts - Part 2: Preferred belt types (ISO 15236-2:2017) | |
| Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2007) (Endorsed by AENOR in October of 2007.) | |
| Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017) (Endorsed by Asociación Española de Normalización in May of 2017.) | |
| Steel cord conveyor belts - Part 4: Vulcanized belt joints (ISO 15236-4:2004) | |
| Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2000/Cor. | |
| Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)... | |
| Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices. (ISO 14937:2000) | |
| TAPPING SCREWS THREAD (ISO 1478:1999) | |
| TAPPING SCREWS THREAD. (ISO 1478:1983). | |
| Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods (ISO 14720-1:2013)... | |
| Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission... | |
| Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2007) | |
| Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017) (Endorsed by Asociación Española de Normalización in December of 2017.) | |
| Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017) | |
| THERMAL BRIDGES IN BUILDING CONSTRUCTION. LINEAR THERMAL TRANSMITTANCE. SIMPLIFIED METHODS AND DEFAULT VALUES (ISO 14683:1999) | |
| Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998) | |
| Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) | |
| Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017) | |
| Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) | |
| THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS. (ISO 14921:2001). | |
| Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018) | |
| Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021) | |
| Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999) | |
| Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999) | |
| Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999) | |
| Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999) | |
| Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) | |
| Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023) | |
| Thermal spraying - Terminology, classification (ISO 14917:2017) | |
| Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015) | |
| Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions. (ISO 14919:2001) | |
| Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023) | |
| Thermal spraying. Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005) | |
| THERMAL SPRAYING. SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:1999) | |
| Traffic and travel information (TTI) - TTI messages via traffic message coding - Par 3: Location referencing for ALERT-C (ISO 14819-3:2004) | |
| Traffic and Travel Information (TTI) - TTI Messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO 14819-1:2003)... | |
| Traffic and Traveller Information (TTI) - TTI Messages via traffic message coding - Part 2: Event and information codes for Radio Data System - Traffic Message Channel (RDS-TMC). (ISO 14819-2:2003)... | |
| Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 6: Encryption and conditional access for the Radio Data System - Traffic Message Channel ALERT C... | |
| Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions. (ISO 15061:2001) | |
| Water quality - Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio) (ISO 15088:2007) | |
| WATER QUALITY. DETERMINATION OF DISSOLVED LI+, NA+, NH4+, K+, MN2+, CA2+, MG2+, SR2+ AND BA2+ USING ION CHROMATOGRAPHY. METHOD FOR WATER AND WASTE WATER (ISO 14911:1998) | |
| Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008) | |
| Welding coordination - Tasks and responsibilities (ISO 14731:2006) | |
| Welding coordination - Tasks and responsibilities (ISO 14731:2019) | |
| Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) | |
| Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2025) | |
| WELDING. ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES. PART 1: PRINCIPLES AND ACCEPTANCE CONDITIONS. (ISO 14744-1:2000). | |
| WELDING. ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES. PART 2: MEASUREMENT OF ACCELERATING VOLTAGE CHARACTERISTICS. (ISO 14744-2:2000) | |
| WELDING. ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES. PART 3: MEASUREMENT OF BEAM CURRENT CHARACTERISTICS. (ISO 14744-3:2000) | |
| WELDING. ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES. PART 4: MEASUREMENT OF WELDING SPEED. (ISO 14744-4:2000). | |
| WELDING. ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES. PART 5: MEASUREMENT OF RUN-OUT ACCURACY. (ISO 14744-5:2000). | |
| WELDING. ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES. PART 6: MEASUREMENT OF STABILITY OF SPOT POSITION. (ISO 14744-6:2000). | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2009) | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2019) | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2009) | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017) |
| << Prev | Next >> |