ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 1 Scope This European Standard specifies requirements for the qualification testing of welding procedures for the arc welding of tube to tube-plate joints in metallic materials by manual, partly mechanized,... | |
| 1.1 This International Standard specifies the requirements for design and construction of piping for the petroleum and natural gas industries, including associated inspection and testing. 1.2 This International Standard is... | |
| Acoustics -- Guidelines for noise control by enclosures and cabins | |
| Acoustics -- Noise control design procedures for open plant | |
| Additional views for user concerns | |
| Adhesives -- Determination of the bond strength of engineering-plastic joints | |
| Adhesives -- Sampling | |
| Adhesives for thermoplastic piping systems -- Test method for the determination of thermal stability of adhesives | |
| Animal and vegetable fats and oils -- Determination of cadmium content by direct graphite furnace atomic absorption spectrometry | |
| Animal and vegetable fats and oils -- Determination of stigmastadienes in vegetable oils -- Part 1: Method using capillary-column gas chromatography (Reference method) | |
| Applies to rotary piston engines and reciprocating internal combustion engines except of free piston engines for passenger cars and other motor vehicles, excluding motorcycles, mopeds and agricultural tractors, normally travelling... | |
| Banking -- Certificate management -- Part 2: Certificate extensions | |
| Belt drives -- Pulleys -- Limiting values for adjustment of centres | |
| Bi-directional and multi-directional fork-lift trucks -- Stability tests | |
| Closed end blind rivets with break pull mandrel and countersunk head -- AlA/St | |
| Closed end blind rivets with break pull mandrel and protruding head -- AlA/St | |
| Coated abrasives -- Flap discs | |
| Covers principle, reagents, apparatus, sampling, procedure, expression of results, repeatibility and test report. | |
| Cranes -- Competency requirements for crane drivers (operators), slingers, signallers and assessors | |
| Dental handpieces -- Air-powered scalers and scaler tips | |
| Direct reduced iron -- Determination of apparent density and water absorption of hot briquetted iron (HBI) | |
| Durum wheat semolinas -- Determination of the undersize fraction | |
| Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence | |
| Ergonomic design for the safety of machinery -- Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery | |
| Ergonomic design for the safety of machinery -- Part 2: Principles for determining the dimensions required for access openings | |
| Ergonomic design for the safety of machinery -- Part 3: Anthropometric data | |
| Exclusion of olive pomace oil from the scope | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for tensile stress-strain behaviour of continuous, fibre- reinforced composites at room temperature | |
| Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 1: Sampling | |
| Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing | |
| Gives an illustrated nomenclature of terms and a method of designation used in conventional weaving looms according to the position (left, right or centre) of the shuttle eye. - Replaces... | |
| Graphic technology -- Prepress digital data exchange -- Use of PDF -- Part 1: Complete exchange using CMYK data (PDF/X-1 and PDF/X-1a) | |
| Hammers -- Technical specifications concerning steel hammer heads -- Test procedures | |
| Houses -- Description of performance -- Part 4: Fire safety | |
| Hydraulic fluid power -- Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) -- Specifications | |
| Implants for surgery -- Copolymers and blends based on polylactide -- In vitro degradation testing | |
| Includes the requirements for these components for use in aircraft electrical systems having voltage and frequency characteristics conforming to ISO/R 222, at any ambient temperature from -65 to + 85... | |
| Indoor air -- Part 28: Determination of odour emissions from building products using test chambers | |
| Indoor, ambient and workplace air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Part 1: Pumped sampling | |
| Industrial automation systems -- Requirements for enterprise-reference architectures and methodologies | |
| Industrial trucks -- Specifications for indicator lights for container handling and grappler arm operations | |
| Information and documentation -- International Standard Musical Work Code (ISWC) | |
| Information and documentation -- Records management -- Part 1: General | |
| Information and documentation -- Transliteration of Devanagari and related Indic scripts into Latin characters | |
| ISO 15487:2009 specifies a method of test for evaluating the smoothness appearance of flat fabric and seams, and the retention of pressed-in creases in garments and other textile products after... | |
| ISO 15488:2003 specifies the dimensions, materials and manufacturing requirements, and designation of collets (of form A or of form B) for tools with cylindrical shanks and their corresponding holders and... | |
| ISO 15490:2008 specifies the test method for determining the tensile strength under uniaxial loading of monolithic fine ceramics and whisker or particulate-reinforc ed ceramic composites at room temperature. This test... | |
| ISO 15493:2003 specifies the characteristics and requirements for components such as pipes, fittings and valves made from one of the following materials: acrylonitrile-butadi ene-styrene (ABS); unplasticized poly(vinyl chloride) (PVC-U); chlorinated... | |
| ISO 15494:2003 specifies the characteristics and requirements for components such as pipes, fittings and valves made from one of the following materials: polybutene (PB); polyethylene (PE); polypropylene (PP); intended to... | |
| ISO 15496:2004 describes a comparatively simple method for testing the water vapour permeability of textiles that will provide the manufacturer with a clearly recognized method for quality control within the... | |
| ISO 15500-20:2007 provides specific requirements and tests applicable to the rigid fuel line in carbon steel, intended for use on the types of motor vehicles, as defined in ISO 3833,... | |
| ISO 15500-4:2012 specifies tests and requirements for the manual valve, a compressed natural gas (CNG) fuel system component intended for use on the types of motor vehicles defined in ISO... | |
| ISO 15500-9:2012 specifies tests and requirements for the pressure regulator, a compressed natural gas (CNG) fuel system component intended for use on the types of motor vehicles defined in ISO... | |
| ISO 15510:2010 lists the chemical compositions of stainless steels agreed by ISO/TC 17/SC 4, mainly on the basis of a composition of the specifications in existing ISO, ASTM, EN, JIS... | |
| ISO 15511:2011 specifies the International Standard identifier for libraries and related organizations (ISIL), which comprises a set of standard identifiers used for the unique identification of libraries, archives, museums and... | |
| ISO 15512:2008 specifies methods for the determination of the water content of plastics in the form of granules and finished articles. These methods do not test for water absorption (kinetics... | |
| ISO 15517:2003 specifies a method for the determination of the nitrate content in tobacco by continuous-flow analysis. This method is applicable to manufactured and unmanufactured tobacco. | |
| ISO 15519-1:2010 provides general rules and guidelines for the preparation and presentation of information in diagrams for process industry. | |
| ISO 15527:2010 specifies the requirements and test methods for solid flat compression-moulded sheets of polyethylene (PE‑UHMW and PE‑HD) without fillers or reinforcing materials. It applies only to thicknesses from 10... | |
| ISO 15529:2010 specifies the principal MTFs associated with a sampled imaging system, together with related terms, and outlines a number of suitable techniques for measuring these MTFs. It also defines... | |
| ISO 15530-3:2011 specifies the evaluation of measurement uncertainty for results of measurements obtained by a CMM (coordinate measuring machine) and by using calibrated workpieces or measurement standards. It provides an... | |
| ISO 15531-1:2004 provides a general overview of the whole ISO 15531 standard (MANDATE). It specifies its scope and provides a number of basic definitions on which the whole standard is... | |
| ISO 15531-31:2004 is an introduction to the ISO 15531-3x series of ISO 15531. It describes the universe of discourse of this International Standard as well as the resources information model. | |
| ISO 15531-32:2005 specifies the full description of the conceptual model for resources usage management data, based on the resource information model and basic principles described in ISO15531-31. The following are... | |
| ISO 15531-42:2005 specifies a generic framework for the description of topological properties applicable to a wide range of one dimension domains. Developments made in ISO 15531-42:2005 are focused on the... | |
| ISO 15531-43:2006 addresses the representation of information related to manufacturing flow management, through the development of a conceptual model of the processes and of the flows of materials and information. | |
| ISO 15531-44:2010 provides models for the representation of data that are captured from the manufacturing control level, and stored and handled at the manufacturing management level for any purpose (e.g. | |
| ISO 15535:2012 specifies general requirements for anthropometric databases and their associated reports that contain measurements taken in accordance with ISO 7250-1.It provides necessary information, such as characteristics of the user... | |
| ISO 15536-1:2005 establishes the general requirements for the design and development of computer manikins, body templates and manikin systems. It addresses their anthropometric and biomechanical properties, taking into account their... | |
| ISO 15536-2:2007 establishes the requirements for the verification of the functions and validation of dimensions of computer manikins. These requirements concern the documentation of the data employed to construct computer... | |
| ISO 15537:2004 establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test. | |
| ISO 15546:2011 specifies the technical delivery conditions, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool... | |
| ISO 15547-1:2005 gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of plate-and-frame heat exchangers for use in petroleum, petrochemical and natural... | |
| ISO 15547-2:2005 gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical... | |
| ISO 15548-1:2008 identifies the functional characteristics of a general-purpose eddy current instrument and provides methods for their measurement and verification. The evaluation of these characteristics permits a well-defined description and... | |
| ISO 15548-2:2008 identifies the functional characteristics of a probe and its interconnecting elements and provides methods for their measurement and verification. The evaluation of these characteristics permits a well-defined description... | |
| ISO 15548-3:2008 identifies the functional characteristics of a general-purpose eddy current system and provides methods for their measurement and verification. The evaluation of these characteristics permits a well-defined description and... | |
| ISO 15549:2008 defines the general principles to be applied to non-destructive eddy current examination of products and materials in order to ensure defined and repeatable performance. It includes guidelines for... | |
| ISO 15550 establishes the framework for ISO engine power measurement standards. It specifies standard reference conditions and methods of declaring the power, fuel consumption, lubricating oil consumption and test methods... | |
| ISO 15552:2004 established a metric series of basic, mounting and accessories dimensions as required for interchangeability of single- or double-rod pneumatic cylinders, with or without provision for magnetic sensors for... | |
| ISO 15553:2006 specifies a method that is applicable for the detection and enumeration of Cryptosporidium oocysts and Giardia cysts in water. It is applicable for the examination of surface and... | |
| ISO 15583:2005 provides the list of existing maritime standards of ISO and eight (8) shipbuilding nations in the world (The People's Republic of China, Germany, India, Japan, The Republic of... | |
| ISO 15585:2006 specifies a method of determination of caking index of hard coal. It is applicable to the evaluation of caking power of bituminous coal with random vitrinite reflectance greater... | |
| ISO 15586:2003 includes principles and procedures for the determination of trace levels of: Ag, Al, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Se, Tl, V, and... | |
| ISO 15589-1:2003 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection systems for on-land pipelines, as defined... | |
| ISO 15589-2:2012 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, fabrication, installation, commissioning, operation, inspection and maintenance of cathodic protection systems for offshore pipelines for the... | |
| ISO 15590-1:2009 specifies the technical delivery conditions for bends made by the induction bending process for use in pipeline transportation systems for the petroleum and natural gas industries as defined... | |
| ISO 15590-2:2003 specifies the technical delivery conditions for unalloyed or low-alloy steel seamless and welded pipeline fittings for use in pipeline transportation systems for the petroleum and natural gas industries... | |
| ISO 15590-3:2004 applies to weldneck and blind flanges (full face, raised face, and RTJ groove) as well as anchor, swivel-ring flanges and orifice flanges. ISO 15590-3:2004 specifies the technical requirements... | |
| ISO 15592-3:2008 specifies methods for the determination of total particulate matter and preparation for the subsequent determination of nicotine-free dry particulate matter present in the smoke from articles made from... | |
| ISO 15607:2003 defines general rules for the specification and qualification of welding procedures for metallic materials. It also refers to several other standards as regards detailed rules for specific applications. | |
| ISO 15609-1:2004 specifies requirements for the content of welding procedure specifications for arc welding processes. The variables listed in this International Standard are those influencing the quality of the welded... | |
| ISO 15609-3:2004 specifies requirements for the content of welding procedure specifications for electron beam welding. Variables listed in this International Standard are those influencing the quality and properties of the... | |
| ISO 15609-4:2009 specifies requirements for the content of the welding procedure specification (WPS) for laser beam welding processes, including overlay welding. It is not applicable to other processes for cladding... | |
| ISO 15609-5:2011 specifies requirements for the content of welding procedure specifications for resistance spot, seam, butt and projection welding processes. It is necessary to establish the acceptability of applying the... | |
| ISO 15609-6:2013 specifies requirements for the content of welding procedure specifications for laser-arc hybrid welding processes. Variables listed in ISO 15609-6:2013 are those influencing the quality and the properties of... | |
| ISO 15610:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on tested consumables. In addition, it gives the range... | |
| ISO 15611:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on previous welding experience. In addition it gives the... | |
| ISO 15612:2004 gives the information necessary to explain the requirements referenced in ISO 15607 about qualification by adoption of a standard welding procedure, and establishes the conditions, limits and ranges... | |
| ISO 15613:2004 specifies how a preliminary welding procedure specification is qualified based on pre-production welding tests. It is applicable to arc welding, gas welding, beam welding, resistance welding, stud welding... | |
| ISO 15614-10:2005 specifies how to qualify welding procedure specifications for welding in hyperbaric dry environments. It also specifies the minimum testing requirements necessary for qualification of welding procedures. ISO 15614-10:2005... | |
| ISO 15614-12:2004 specifies the tests which may be used for qualification of welding procedure specifications for spot, seam and projection welding processes. ISO 15614-12:2004 defines the conditions for carrying out... | |
| ISO 15614-13:2012 specifies tests for the qualification of welding procedure specifications applicable to upset (resistance butt) welding and flash welding of metallic materials, e.g. with solid, tubular, flat or circular... | |
| ISO 15614-14:2013 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. ISO 15614-14:2013 defines the conditions for the execution of welding procedure tests and the range... | |
| ISO 15614-1:2004 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It defines the conditions for the execution of welding procedure tests and the range of... | |
| ISO 15614-2:2005 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It applies to the arc welding of wrought and cast aluminium and its alloys. It... | |
| ISO 15614-3:2008 specifies how a preliminary welding procedure specification (pWPS) for production and repair welding of non-alloyed and low-alloyed cast irons is qualified by fusion welding procedure tests. ISO 15614-3:2008... | |
| ISO 15614-4:2005 specifies how a welding procedure specification for finishing welding of aluminium castings is qualified by welding procedure tests. It does not apply to repair welding. | |
| ISO 15614-5:2004 specifies how a welding procedure specification is qualified by welding procedure tests. It defines the conditions for the execution of welding procedure tests and the range of qualification... | |
| ISO 15614-6:2006 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It applies to the arc and gas welding of copper and copper alloys in all... | |
| ISO 15614-7:2007 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests. ISO 15614-7:2007 defines the conditions for carrying out welding procedure tests and... | |
| ISO 15615:2013 establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems as defined in ISO 14114. It does not cover the... | |
| ISO 15616-1:2003 is applicable to CO2-laser beam machines for welding and cutting in two operating directions. The main purpose of this International Standard is to provide requirements for... | |
| ISO 15616-2:2003 is applicable to the measurement of the precision of the manipulation system, the positioning accuracy, the repeatability of positioning and the trajectory exactness for the acceptance testing of... | |
| ISO 15616-3:2003 is applicable to the measurement of the process-oriented gas parameters for the acceptance tests for CO2-laser beam machines for high quality welding and cutting in two... | |
| ISO 15616-4:2008 provides minimum requirements for acceptance testing, using practical test methods, for CO2-laser beam machines for high quality welding and cutting in two dimensions (2-D), having a... | |
| ISO 15621:2011 gives general guidelines on the methodology of evaluating disposable urine-absorbing aids, and provides a context for the procedures described in other International Standards or published testing procedures. These... | |
| ISO 15622:2010 contains the basic control strategy, minimum functionality requirements, basic driver interface elements, minimum requirements for diagnostics and reaction to failure, and performance test procedures for Adaptive Cruise Control... | |
| ISO 15623:2013 specifies performance requirements and test procedures for systems capable of warning the driver of a potential rear-end collision with other vehicles ahead of the subject vehicle while it... | |
| ISO 15626:2011 specifies acceptance levels for the time-of-flight diffraction technique (TOFD) of full penetration welds in ferritic steels from 6 mm up to 300 mm thickness which correspond to the... | |
| ISO 15628:2007 specifies the application layer core which provides communication tools for applications based on DSRC. These tools consist of kernels that can be used by application processes via service... | |
| ISO 15630-1:2010 specifies test methods applicable to reinforcing bars, wire rod and wire for concrete. | |
| ISO 15630-2:2010 specifies test methods applicable to welded fabric for the reinforcement of concrete. | |
| ISO 15630-3:2010 specifies test methods applicable to prestressing steels (bar, wire or strand) for concrete. | |
| ISO 15633:2009 specifies a flame atomic absorption spectrometric method for the determination of the nickel mass fraction of iron ores. This method is applicable to mass fractions of nickel between... | |
| ISO 15634:2005 specifies a flame atomic absorption spectrometric method for the determination of the chromium content of iron ores. ISO 15634:2005 is applicable to chromium contents between 0,001 6 %... | |
| ISO 15636:2003 specifies the design and dimensions of back-up pads intended for the fixing or clamping of vulcanized fibre discs in accordance with ISO 16057, or comparable grinding tools on... | |
| ISO 15637-1:2002 applies to holding fixtures with shank for use with cylindrical abrasive sleeves with a diameter equal to or less than 100 mm in accordance with ISO 2421. Holding... | |
| ISO 15637-2:2002 applies to holding fixtures for use with cylindrical abrasive sleeves with a diameter greater than 100 mm in accordance with ISO 2421. These holding fixtures clamp the cylindrical... | |
| ISO 15638-1:2012 provides the following for cooperative telematics applications for regulated commercial freight vehicles: A framework for the provision of cooperative telematics application services for regulated commercial freight vehicles; A... | |
| ISO 15638-2:2013 defines a generic cooperative ITS service platform for TARV using CALM, including protocol of coding, timing, and performance and support interfaces (such as driver ID card/USB or similar... | |
| ISO 15638-3:2013 defines provisions to enable monitoring and enforcement of regulated vehicles and approval authority approval procedures, specifically: a) Definition of the roles and responsibilities of key entities: user, service... | |
| ISO 15638-5:2013 defines generic basic vehicle and core application data provision to application service providers to be supported by in-vehicle systems (IVS) for cooperative telematics applications for regulated commercial freight... | |
| ISO 15638-7:2013 provides business framework based on a (multiple) service provider oriented approach for the provision of additional unregulated services to regulated commercial freight vehicles using a common on-board telematics... | |
| ISO 15642:2003 establishes the terminology, gives requirements for specifications, and lists characteristics useful for determining theoretical performances and drafting technical documents for asphalt mixing plants used in the construction and... | |
| ISO 15647:2004 specifies a method of isotopic analysis of uranium hexafluoride (UF6) with 235U concentrations less than or equal to 5 % by mass and 234U... | |
| ISO 15648|IDF 179:2004 specifies a method for the determination of the salt content of all types of butter containing more than 0,1 % (mass fraction) salt. | |
| ISO 15652:2003 specifies the minimum level of requirements for construction, operation and installation of remote steering systems for all small inboard jet boats weighing less than 1 000 kg, excluding... | |
| ISO 15653:2010 specifies methods for determining fracture toughness in terms of K (stress intensity factor), δ (crack tip opening displacement, CTOD) and J (experimental equivalent of the J‑integral) for... | |
| ISO 15654:2004 specifies an axial force fatigue test method for transmission roller chains, the tests being of the fluctuating tension type, carried out at room temperature in air, with the... | |
| ISO 15662:2006 provides information as a checklist to consider handling messages that are defined by the application working groups of ISO/TC204, installing systems and selecting suitable wide area communication systems... | |
| ISO 15665:2003 defines the acoustic performance of three classes (classes A, B and C) of pipe insulation. It also specifies three types of construction that will meet these acoustic performance... | |
| ISO 15673:2005 applies to the planning, design and construction of structural reinforced concrete structures to be used in new low-rise buildings with restricted occupancy, number of stories, and area. The... | |
| ISO 15674:2009 specifies requirements for sterile, single-use, extracorporeal hard-shell cardiotomy/venous reservoir systems and soft venous reservoir bags intended for use as a blood reservoir during cardiopulmonary bypass (CPB) surgery. ISO... | |
| ISO 15675:2009 specifies requirements for sterile, single-use, arterial blood line filters intended to filter and remove emboli, debris, blood clots and other potentially hazardous solid and gaseous material from the... | |
| ISO 15676:2005 specifies requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO). ISO 15676:2005 is applicable to all medical tubing intended for cardiopulmonary bypass (CPB) and/or... | |
| ISO 15680:2003 specifies a general method for the determination of volatile organic compounds (VOCs) in water by purge-and-trap isolation and gas chromatography (GC). Annexes A, B and C provide examples... | |
| ISO 15681-1:2003 specifies flow injection analysis (FIA) methods for the determination of orthophosphate in the mass concentration range from 0,01 mg/l to 1,0 mg/l (P), and total phosphorus by manual... | |
| ISO 15681-2:2003 specifies CFA methods for the determination of orthophosphate in the mass concentration range from 0,01 mg/l to 1,00 mg/l P, and total phosphorus in the mass concentration range... | |
| ISO 15685:2012 specifies a rapid method for the determination of the potential rate of ammonium oxidation and inhibition of nitrification in soils. This method is suitable for all soils containing... | |
| ISO 15686-10:2010 establishes when to specify or verify functional performance requirements during the service life of buildings and building-related facilities, and when to check the capability of buildings and facilities... | |
| ISO 15686-1:2011 identifies and establishes general principles for service life planning and a systematic framework for undertaking service life planning of a planned building or construction work throughout its life... | |
| ISO 15686-2:2012 describes procedures that facilitate service life predictions of building components, based on technical and functional performance. It provides a general framework, principles and requirements for conducting and reporting... | |
| ISO 15686-3:2002 is concerned with ensuring the effective implementation of service life planning. It describes the approach and procedures to be applied to pre-briefing, briefing, design, construction and, where required,... | |
| ISO 15686-5:2008 gives guidelines for performing life cycle cost (LCC) analyses of buildings and constructed assets and their parts. | |
| ISO 15686-7:2006 provides a generic basis for performance evaluation for feedback of service life data from existing buildings and constructed assets, including a definition of the terms to be used... | |
| ISO 15686-8:2008 provides guidance on the provision, selection and formatting of reference service-life data and on the application of these data for the purposes of calculating estimated service life using... | |
| ISO 15688:2012 establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. ISO 15688:2012 does not... | |
| ISO 15689:2003 establishes the terminology, functions, types and characteristics of powder binder spreaders used in road construction and maintenance processes. | |
| ISO 15690:2013 provides recommendations for dealing with discrepancies between dosimeter systems used in parallel, in order to comply with established criteria and national regulations. ISO 15690:2013 gives guidelines for investigating... | |
| ISO 15705:2002 specifies a method for the determination of the chemical oxygen demand (ST-COD) using the sealed tube method. The test is empirical and is applicable to any aqueous sample,... | |
| ISO 15706-1:2002 establishes and defines a voluntary standard numbering system for the unique and international identification of audiovisual works. An International Standard Audiovisual Number (ISAN) identifies an audiovisual work throughout... | |
| ISO 15706-2:2007 establishes a voluntary system for the identification of versions of audiovisual works and other content derived from or closely related to an audiovisual work. It is based on... | |
| ISO 15706:2002 establishes and defines a voluntary standard numbering system for the unique and international identification of audiovisual works. An International Standard Audiovisual Number (ISAN) identifies an audiovisual work throughout... | |
| ISO 15708-1 provides a tutorial introduction to the theory and use of computed tomography. It begins with an overview intended for the interested reader possessing a general technical background. Subsequent,... | |
| ISO 15708-2 describes CT procedures that can provide for non-destructive testing and evaluation. Requirements in this part of ISO 15708 are intended to control the reliability and quality of the... | |
| ISO 15709:2002 gives a simplified theory of the physics of soil water in the unsaturated zone and defines a set of terms, quantities, units and symbols used in the field... | |
| ISO 15711:2003 describes two methods for determining the ability of paint, or other organic coatings, applied to metallic substrates to withstand cathodic disbonding when the surface coating may contain or... | |
| ISO 15712-1:2005 describes calculation models designed to estimate the airborne sound insulation between rooms in buildings, primarily using measured data which characterize direct or indirect flanking transmission by the participating... | |
| ISO 15712-2:2005 specifies calculation models designed to estimate the impact sound insulation between rooms in buildings, primarily on the bases of measured data which characterizes direct or indirect flanking transmission... | |
| ISO 15712-3:2005 specifies a calculation model to estimate the sound insulation or the sound pressure level difference of a façade or other external surface of a building. The calculation is... | |
| ISO 15712-4:2005 describes a calculation model for the sound power level radiated by the envelope of a building due to airborne sound inside that building, primarily by means of measured... | |
| ISO 15713:2006 is applicable to the measurement of the gaseous fluorides that are entrained in gases carried in stacks or ducts. The gaseous fluoride content is expressed as a mass... | |
| ISO 15715:2003 specifies an instrumental method for determining the turbidity of clear liquids. It is applicable to resins and resin solutions, solvents, clear coating materials, monomers and any other liquids... | |
| ISO 15726:2009 covers the requirements for electrodeposited zinc alloy coatings containing either nickel, cobalt or iron. It provides a method of designating the electrodeposited coatings, chromate conversion coatings and other... | |
| ISO 15732:2003 describes a test method for the determination of fracture toughness of monolithic ceramic materials at room temperature by the Single-Edge-Precrack ed-Beam (SEPB) method. This International Standard is intended... | |
| ISO 15736:2006 specifies production tests and inspections, conformity assessment procedures, and marking requirements for life-saving appliances that utilize pyrotechnic devices in functioning. Specifically, it applies to products which have been... | |
| ISO 15739:2013 specifies methods for measuring and reporting the noise versus signal level and dynamic range of digital still cameras. It applies to both monochrome and colour electronic digital still... | |
| ISO 15740:2008 provides a common communication protocol for exchanging images with and between digital still photography devices (DSPDs). This includes communication between DSPDs and host computers, printers, other digital still... | |
| ISO 15743:2008 presents a strategy and practical tools for assessing and managing cold risk in the workplace, and includes: models and methods for cold risk assessment and management; a checklist... | |
| ISO 15745 defines an application integration framework - a set of elements and rules for describing integration models and application interoperability profiles. ISO 15745-1:2003 defines the generic elements and rules... | |
| ISO 15745-2:2003 defines the technology specific elements and rules for describing both communication network profiles and the communication related aspects of device profiles specific to ISO 11898-based control systems. In... | |
| ISO 15745-3:2003 defines the technology specific elements and rules for describing both communication network profiles and the communication related aspects of device profiles specific to IEC 61158-based control systems. In... | |
| ISO 15745-4:2003 defines the technology specific elements and rules for describing both communication network profiles and the communication related aspects of device profiles specific to Ethernet-based control systems. In particular,... | |
| ISO 15745-5:2007 defines the technology specific elements and rules for describing both communication network profiles and the communication related aspects of device profiles specific to HDLC-based control systems. ISO 15745-5:2007... | |
| ISO 15747:2010 contains requirements that relate to the safe handling and the physical, chemical and biological testing of plastic containers for parenterals. ISO 15747:2010 is applicable to plastic containers for... | |
| ISO 15748-1 applies to the planning, design and configuration of potable water supply systems on ships, stationary or floating marine structures and inland waterway vessels. It specifies the minimum requirements... | |
| ISO 15748-2 applies to the planning, design and configuration of potable water supply systems on ships, stationary or floating marine structures and inland waterway crafts. It serves to determine the... | |
| ISO 15749-1:2004 is valid, in conjunction with ISO 15749-2 to ISO 15749-4, for planning and designing drainage systems which evacuate wastewater from accommodation and commissary areas (sanitary drainage) on ships... | |
| ISO 15749-2:2004 applies to the design of sanitary drain lines in gravity systems (gravity drainage) on ships and marine structures. For planning and basic requirements, ISO 15749-1 is applicable. | |
| ISO 15749-3:2004 applies to the design of sanitary drain lines in vacuum systems on ships and marine structures. For planning and basic requirements, see ISO 15749-1. | |
| ISO 15749-4:2004 applies to the design of sewage disposal pipes within the framework of sanitary drainage on ships and marine structures. For planning and basic requirements, see ISO 15749-1:2004. | |
| ISO 15749-5:2004 applies to the planning and design of drain lines for gravity-operated conveyance of grey water from weather decks and non-weathertight spaces on ships and marine structures, ro-ro spaces,... | |
| ISO 15752:2010 specifies optical radiation safety aspects of endoilluminator light sources and endoilluminator light guides which are used to illuminate the interior of the eye during ocular surgery. | |
| ISO 15753:2006 describes two methods for the determination of 15 polycyclic aromatic hydrocarbons (PAHs) in animal and vegetable fats and oils: a general method, and a method specific for coconut... | |
| ISO 15754:2009 specifies a method for the determination of z-directional tensile strength, i.e. the tensile strength in the z-direction. It is applicable to paper and board, but not applicable to... | |
| ISO 15758:2004 specifies a method to calculate the density of water vapour flow rate in cold pipe insulation systems, and the total amount of water diffused into the insulation over... | |
| ISO 15759:2005 specifies the dimensional and functional requirements for plastics caps with inserted elastomeric liners, attached to the infusion container [blow-fill-seal (BFS) container] by welding or by collar technique. These... | |
| ISO 15761 specifies the requirements for a series of compact steel gate, globe and check valves for petroleum and natural gas industry applications. It is applicable to valves of nominal... | |
| ISO 15763 defines terms and specifies requirements and tests for vehicle alarm systems (VAS) intended for installation within buses and commercial vehicles (as defined in ISO 3833) having a maximum... | |
| ISO 15764:2004 describes an extension of data link protocols for enhancing the security of data transfers between electronic control units (ECUs) connected by a communication network used in road vehicles. | |
| ISO 15765-1:2011 gives an overview of the structure and the partitioning of ISO 15765, and shows the relationships between the different parts. It also defines the diagnostic network architecture. The... | |
| ISO 15765-3:2004 specifies the implementation of a common set of unified diagnostic services (UDS), in accordance with ISO 14229-1, on controller area networks (CAN) as specified in ISO 11898. It... | |
| ISO 15765-4:2011 specifies requirements for controller area networks (CAN) where one or more controllers comply with on-board diagnostics (OBD) or world-wide harmonized on-board diagnostics (WWH-OBD) regulations. The network presumes the... | |
| ISO 15767:2009 provides recommendations for controlling the analytical uncertainty associated with aerosol collection medium instability, where collection medium or collection substrate includes any article used to collect particles (e.g. filter... | |
| ISO 15769:2010 provides guidelines on the principles of operation and the selection and use of Doppler-based and echo correlation velocity meters for continuous-flow gauging. ISO 15769:2010 is applicable to channel... | |
| ISO 15779:2011 specifies requirements and test methods for components and gives recommendations for the design, installation, testing, maintenance and safety of condensed aerosol firefighting systems in buildings, plants or other... | |
| ISO 15781:2013 specifies how to measure and report the shooting time lag, shutter release time lag, shooting rate and start-up time for digital still cameras, including camera modules in phones... | |
| ISO 15782-1:2009 defines a certificate management system for financial industry use for legal and natural persons that includes credentials and certificate contents, Certification Authority systems, including certificates for digital signatures... | |
| ISO 15784-1:2008 provides principles and documentation rules of application profiles used to exchange data and messages between a traffic management centre and roadside modules used for traffic management. The application... | |
| ISO 15784-3:2008 defines an application profile referring ISO 14827 and other base standards. The application profile it specifies is used to exchange data and messages between a traffic management centre... | |
| ISO 15786:2008 specifies rules for the simplified representation, dimensioning and tolerancing of holes, counterbores, internal threads and chamfers on drawings. | |
| ISO 15788-2:2003 specifies a method for the determination of steradienes, especially stigmastadienes. Steradienes are formed by dehydration of sterols during bleaching and also partially during steam washing and deodorization. The... | |
| ISO 15790:2004 specifies the documentation requirements for certified reference materials (CRMs), procedures for the use of CRMs, and procedures for the computation and reporting of the combined standard uncertainty of... | |
| ISO 15792-3:2011 specifies the preparation and assessment of fillet weld test pieces for conformity assessment of positional usability and root penetration requirements for consumables classification standards for welding non-alloy and... | |
| ISO 15796:2005 specifies generic methods for detecting and correcting bias (systematic errors) of analytical procedures for the analysis of gases, using reference gas mixtures or reference analytical procedures, as well... | |
| ISO 15797 specifies test procedures and equipment which can be used in the evaluation of cotton, polyester/cotton and reverse blend workwear intended to be industrially laundered. They serve as a... | |
| ISO 15798:2010 is applicable to ophthalmic viscosurgical devices (OVDs), a class of non-active surgical implants with viscous and/or viscoelastic properties, intended for use during surgery in the anterior segment of... | |
| ISO 15799:2003 provides guidance on the selection of experimental methods for the assessment of the ecotoxic potential of soils and soil materials (e.g. excavated and remediated soils, refills, embankments) with... | |
| ISO 15800:2003 gives guidelines on the kind and extent of soil characterization necessary for the evaluation of human exposure to substances that can cause adverse effects. The possibilities of standardizing... | |
| ISO 1580:2011 specifies the characteristics of slotted pan head screws of product grade A and with threads from M1,6 to M10 inclusive. | |
| ISO 15817:2012 specifies the essential safety requirements for remote operator control systems used on earth-moving machinery as defined in ISO 6165. It is not applicable to autonomous control systems that... | |
| ISO 15819:2008 describes a method for the detection and quantification of NDELA in cosmetics and raw materials used in cosmetics. This method is not applicable to the detection and/or quantification... | |
| ISO 15821:2007 specifies a test method for determining the water-tightness under dynamic pressure of doorsets and windows, assembled for normal use and installed as in practice. ISO 15821:2007 is applicable... | |
| ISO 15822:2007 specifies the test method for evaluating the opening function of single-leaf doorset under in-plane diagonal deformation by in-plane static load. | |
| ISO 15825:2004 specifies a method for determining the size distribution of carbon black aggregates, using a disc centrifuge photosedimentometer. This technique is based on the hydrodynamic behaviour of carbon black... | |
| ISO 15828:2004 specifies a full scale test procedure for frontal offset deformable barrier impacts, that will ensure such tests are conducted under the same conditions. It is applicable to passenger... | |
| ISO 15829:2013 specifies dynamic side impact test procedures with poles for evaluating the effects of the interaction between side airbags and occupants of road vehicles. | |
| ISO 15830-1:2013 provides the definitions, symbols, and rationale used in all parts of the ISO 15830 series for the WorldSID 50th percentile side-impact dummy, a standardized anthropomorphic dummy for side-impact... | |
| ISO 15830-2:2013 specifies requirements for mechanical components, drawings and specifications, validation tests, and support equipment for the WorldSID 50th percentile side-impact dummy, a standardized anthropomorphic dummy for side-impact testing of... | |
| ISO 15830-3:2013 specifies requirements for electronic components of the WorldSID 50th percentile side-impact dummy, a standardized anthropomorphic dummy for side-impact testing of road vehicles. It is applicable to impact tests... | |
| ISO 15830-4:2013 specifies requirements for assembling and disassembling of the WorldSID 50th percentile side impact dummy, a standardized anthropomorphic dummy for side impact testing of road vehicles. It is applicable... | |
| ISO 15831:2004 describes the requirements of the thermal manikin and the test procedure used to measure the thermal insulation of a clothing ensemble, as it becomes effective for the wearer... | |
| ISO 15835-1:2009 specifies requirements for reinforcement couplers, hereafter called couplers, to be used for splicing of steel reinforcing bars. ISO 15835-1:2009 specifies requirements for couplers to be used for mechanical... | |
| ISO 15835-2:2009 specifies test methods applicable to couplers for mechanical splices of steel reinforcing bars. ISO 15835-2:2009 is intended to be applicable in relation to the various standards for steel... | |
| ISO 15836:2009 establishes a standard for cross-domain resource description, known as the Dublin Core Metadata Element Set. Like RFC 3986, ISO 15836:2009 does not limit what might be a resource. | |
| ISO 15837:2004 provides the performance characteristics and qualification tests required for gasketed mechanical couplings, including grooved-type mechanical couplings for grooved-end pipe, mechanical restraint couplings for plain-end pipe and mechanical compression... | |
| ISO 15838:2003 defines classification, materials, test requirements, inspection requirements, marking and packaging of fittings for use with gasketed mechanical couplings (GMCs) conforming to ISO 15837. | |
| ISO 15839:2003 describes the performance testing of on-line sensors/analysing equipment for water. The standard is applicable to most sensors/analysing equipment, but it is recognized that, for some sensors/analysing equipment, certain... | |
| ISO 15840:2004 applies to reinforced thermosetting resin pipe systems, with nominal diameter 0 through 1 200 mm and nominal pipe sizes 0 through 48, which are to be used in... | |
| ISO 15841:2006 specifies requirements and test methods for wires to be used in fixed and removable orthodontic appliances. It includes preformed orthodontic archwires but excludes springs and other preformed components. | |
| ISO 15848-1:2005 specifies testing procedures, for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile... | |
| ISO 15848-2:2006 specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile... | |
| ISO 15850 specifies a method for measuring the propagation of a crack in a notched specimen subjected to a cyclic tensile load varying between a constant positive minimum and a... | |
| ISO 15854:2005 is applicable to dental casting wax and to dental baseplate wax. It specifies the classification of, and requirements for, dental casting wax and baseplate wax together with the... | |
| ISO 15856:2009 is the first part of a series on space environment simulation for on-ground tests of materials used in space. This International Standard covers the testing of non-metallic materials... | |
| ISO 15859-10:2004 specifies limits for the composition of water and establishes the sampling and test requirements applicable for the verification of the water composition. ISO 15859-10:2004 is applicable to only... | |
| ISO 15859-11:2004 specifies limits for the composition of ammonia (NH3) and establishes the sampling and test requirements applicable for the verification of the ammonia composition. ISO 15859-11:2004 is... | |
| ISO 15859-12:2004 specifies limits for the composition of carbon dioxide (CO2) and establishes the sampling and test requirements applicable for the verification of the carbon dioxide composition. ISO... | |
| ISO 15859-13:2004 specifies limits for the composition of breathing air and establishes the sampling and test requirements applicable for the verification of the breathing air composition. ISO 15859-13:2004 is applicable... | |
| ISO 15859-1:2004 specifies the limit values for the composition of oxygen and establishes the sampling and test requirements applicable for the verification of the oxygen composition. ISO 15859-1:2004 is applicable... | |
| ISO 15859-2:2004 specifies limits for the composition of hydrogen and establishes the sampling and test requirements applicable for the verification of the hydrogen composition. ISO 15859-2:2004 is applicable to hydrogen... | |
| ISO 15859-3:2004 specifies limits for the composition of nitrogen and establishes the sampling and test requirements applicable for the verification of nitrogen composition. ISO 15859-3:2004 is applicable to nitrogen, used... | |
| ISO 15859-4:2004 specifies limits for the composition of helium and establishes the sampling and test requirements applicable for the verification of the helium composition. ISO 15859-4:2004 is applicable to helium,... | |
| ISO 15859-5:2004 specifies limits for the chemical composition and physical properties of nitrogen tetroxide (N2O4)-based propellants and establishes the sampling and test requirements applicable for the... | |
| ISO 15859-6:2004 specifies limits for the composition of monomethylhydrazine and establishes the sampling and test requirements applicable for the verification of the monomethylhydrazine (MMH) composition. ISO 15859-6:2004 is applicable to... | |
| ISO 15859-7:2004 specifies limits for the composition and physical properties of anhydrous hydrazine (N2H4) and establishes the sampling and test requirements applicable for the verification of... | |
| ISO 15859-8:2004 specifies limits for the composition of kerosine and establishes the sampling and test requirements applicable for the verification of the kerosine composition. ISO 15859-8:2004 is applicable to kerosine... | |
| ISO 15859-9:2004 specifies limits for the composition of argon (Ar) and establishes the sampling and test requirements applicable for the verification of the argon (Ar) composition. ISO 15859-9:2004 is applicable... | |
| ISO 15860:2006 covers gases (air, nitrogen, helium, and argon) compressed up to 40 MPa used in systems and units of space vehicle launch and technical complexes. ISO 15860:2006 determines compressed... | |
| ISO 15862:2009 provides basic requirements for the measurement of the spacecraft flight environments generated by the launch vehicle, telemetry data processing and formats of analysis reports. ISO 15862:2009 defines the... | |
| ISO 15864:2004 provides the baseline standard on the subject of testing at the system, subsystem, and unit level for applicable unmanned spacecraft programs. It also provides the requirements for documentation... | |
| ISO 15865:2005 establishes common rules for assessing the qualification of space systems and products used in space systems against their functional and technical specifications. It establishes a basis for determining... | |
| ISO 15867:2003 defines basic terminology for all forms of IBCs intended to transport non-dangerous goods. | |
| ISO 15872:2002 gives information for the gauging of ISO UNJ threads complying with ISO 3161. Other methods of ensuring that the product is within the specified limits may be used,... | |
| ISO 15873 specifies the construction of, and operational requirements and test methods for, differential pressure Venturi-type liquid additive injectors -- a component of systems used to inject chemicals, including liquid... | |
| ISO 15874-1:2013 specifies the general aspects of polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether or... | |
| ISO 15875-1:2003 specifies the general aspects of crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which... | |
| ISO 15875-2:2003 specifies the characteristics of pipes made from crosslinked polyethylene (PE-X) for piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance... | |
| ISO 15875-3:2003 specifies the characteristics of fittings for crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water... | |
| ISO 15875-5:2003 specifies the characteristics of the fitness for purpose of crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the... | |
| ISO 15876-1:2003 specifies the general aspects of polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may... | |
| ISO 15876-2:2003 specifies the characteristics of pipes made from polybutylene (PB) for piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of... | |
| ISO 15876-3:2003 specifies the characteristics of fittings for polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which... | |
| ISO 15876-5:2003 specifies the characteristics of the fitness for purpose of polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance... | |
| ISO 15877-1:2009 specifies the general requirements of chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water,... | |
| ISO 15877-2:2009 specifies the requirements of pipes made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the... | |
| ISO 15877-3:2009 specifies the characteristics of fittings made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the... | |
| ISO 15877-5:2009 specifies the characteristics of the fitness for purpose of chlorinated poly(vinyl chloride) (PVC-C) piping systems, intended to be used for hot and cold water installations within buildings for... | |
| ISO 15878:2008 deals with asphalt pavers used in road construction and maintenance processes. ISO 15878:2008 provides terminology for the machine and its components, and also gives operation principles and commercial... | |
| ISO 15882:2008 provides guidance for the selection, use and interpretation of results of chemical indicators used in process definition, validation and routine monitoring and overall control of sterilization processes. ISO... | |
| ISO 15883-1:2006 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used... | |
| ISO 15883-2:2006 specifies particular requirements for washer disinfectors (WD) that are intended for use for the cleaning and thermal disinfection, in a single operating cycle, of re-usable medical devices such... | |
| ISO 15883-3:2006 specifies particular requirements for washer-disinfectors (WD) that are intended to be used for emptying, flushing, cleaning and thermal disinfection of containers used to hold human waste for disposal... | |
| ISO 15883-4:2008 specifies the particular requirements, including performance, for washer-disinfectors (WDs) that are intended to be used for cleaning and chemical disinfection of thermolabile endoscopes. ISO 15883-4:2008 also specifies the... | |
| ISO 15883-6:2011 specifies particular requirements for washer-disinfectors (WDs) intended for use when the level of assurance of disinfection that is necessary can be achieved by cleaning and thermal disinfection (... | |
| ISO 15884|IDF 182:2002 specifies a method for the preparation of fatty acid methyl esters from milk fat and fat obtained from dairy products. The method is not suitable for the... | |
| ISO 15885|IDF 184:2002 specifies a method for the determination of the fatty acid composition of milk fat and fat obtained from dairy products. | |
| ISO 15886-1:2012 defines terms related to irrigation sprinklers and specifies the classification of sprinklers according to the following categories: physical factors; characteristics of the water spray; the mechanism for operation... | |
| ISO 15886-3:2012 specifies the conditions and methods used for testing and characterizing the water distribution patterns of irrigation sprinklers. The term sprinkler is used in a broad generic sense and... | |
| ISO 15887:2013 establishes a source-coding data-compression algorithm applied to digital data and specifies how these compressed data shall be inserted into source packets for retrieval and decoding. Source coding for... | |
| ISO 15889:2011 defines the Enhanced Ada SubseT (EAST) language used to create descriptions of data called Data Description Records (DDRs). Such DDRs ensure a complete and exact understanding of the... | |
| ISO 15893:2010 specifies the requirements for the services and protocols of the space communications protocol specification (SCPS) transport service. These requirements are meant to allow independent implementations of this protocol... | |
| ISO 15900:2009 provides guidelines on the determination of aerosol particle size distribution by means of the analysis of electrical mobility of aerosol particles. This measurement is usually called “differential... | |
| ISO 15901-1:2005 describes a method for the evaluation of the pore size distribution and the specific surface in pores of solids by mercury porosimetry according to the method of Ritter... | |
| ISO 15901-2:2006 describes a method for the evaluation of porosity and pore size distribution by gas adsorption. It is a comparative, rather than an absolute test. The method is limited... | |
| ISO 15901-3:2007 describes methods for the evaluation of the volume of micropores (pores of internal width less than 2 nm) and the specific surface area of microporous material by low-temperature... | |
| ISO 15902:2004 defines the basic terms for diffractive optical elements for free space propagation. The purpose of these definitions is to provide an agreed-upon common terminology that will reduce ambiguity... | |
| ISO 15906:2007 describes a method for the measurement of the air permeability of baked anodes, by determining the resistance to airflow of a specimen of specified volume at room temperature,... | |
| ISO 15912:2006 is applicable to dental casting, brazing and refractory investments and refractory die materials, regardless of the nature of the binding system or the particular application. ISO 15912:2006 classifies... | |
| ISO 15914:2004 specifies a method for the enzymatic determination of the total starch content of animal feeding stuffs and raw materials for animal feeding stuffs. The method is also applicable... | |
| ISO 15917:2012 specifies types and dimensions of solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials according to ISO 513. | |
| ISO 15924:2004 provides a code for the presentation of names of scripts. The codes were devised for use in terminology, lexicography, bibliography and linguistics, but they may be used for... | |
| ISO 15926-1:2003 specifies a representation of information associated with engineering, construction and operation of process plants. This representation supports the information requirements of the process industries in all phases of... | |
| ISO 15926-2:2003 specifies a conceptual data model for computer representation of technical information about process plants. The information required by the following activities is within the scope of ISO 15926-2:2003:... | |
| ISO 15927-1:2003 specifies procedures for calculating and presenting the monthly means of those parameters of climatic data needed to assess some aspects of the thermal and moisture performance of buildings. | |
| ISO 15927-2:2009 gives the definition, and specifies methods of calculation and presentation of the monthly external design climate to be used in determining the design cooling load of buildings and... | |
| ISO 15927-3:2009 specifies two procedures for providing an estimate of the quantity of water likely to impact on a wall of any given orientation. It takes account of topography, local... | |
| ISO 15927-4:2005 specifies a method for constructing a reference year of hourly values of appropriate meteorological data suitable for assessing the average annual energy for heating and cooling. Other reference... | |
| ISO 15927-5:2004 specifies the definition, method of calculation and method of presentation of the climatic data to be used in determining the design heat load for space heating in buildings. | |
| ISO 15927-6:2007 specifies the definition, method of computation and method of presentation of data on accumulated temperature differences, used for assessing the energy used for space heating in buildings. These... | |
| ISO 15928-1:2003 sets out a method for describing the structural safety performance of houses. It covers user needs, provides performance descriptions, establishes parameter descriptions, and outlines evaluation processes. It includes... | |
| ISO 15928-2:2005 sets out a method for describing the structural serviceability performance of houses. ISO 1592-2:2005 covers user needs, provides performance descriptions, establishes parameter descriptions and outlines evaluation processes. ISO... | |
| ISO 15928-3:2009 sets out a method for describing the structural durability performance of houses. It covers the needs of the user, provides performance descriptions, establishes parameter descriptions and outlines evaluation... | |
| ISO 15928-5:2013 sets out a method for describing the operating energy performance of houses. It covers user needs, provides performance descriptions and outlines evaluation processes. It includes the description of... | |
| ISO 15930-3:2002 specifies the use of the Portable Document Format (PDF) for the dissemination of complete digital data, in a single exchange, that contains all elements necessary for final print... | |
| ISO 15930-4:2003 specifies the use of the Portable Document Format (PDF) Version 1.4 for the dissemination of complete digital data, in a single exchange that contains all elements ready for... | |
| ISO 15930-6:2003 specifies the use of the Portable Document Format (PDF) Version 1.4 for the dissemination of complete digital data, in a single exchange that contains all elements necessary for... | |
| ISO 15930-7:2010 specifies the use of the Portable Document Format (PDF) Version 1.6 for the dissemination of digital data intended for print reproduction. When all elements necessary for final print... | |
| ISO 15930-8:2010 specifies the use of the Portable Document Format (PDF) Version 1.6 for the dissemination of digital data intended for print, whereby all elements necessary for final print reproduction... | |
| ISO 15952:2005 specifies a semi-static method for the determination of the effects of contaminants on growth and survival of young snails, usually Helix aspersa aspersa Müller. The animals are exposed... | |
| ISO 15967:2007 specifies a method to provide a relative measure for evaluating the resistance of direct reduced iron to size degradation by impact and abrasion. ISO 15967:2007 specifies the determination... | |
| ISO 15970:2008 gives requirements and procedures for the measurement of the properties of natural gas that are used mainly for volume calculation and volume conversion: density at reference and at... | |
| ISO 15971:2008 concerns the measurement of calorific value of natural gas and natural gas substitutes by non‑separative methods, i.e. methods that do not involve the determination of the gas composition,... | |
| ISO 15975 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and... | |
| ISO 15976 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel... | |
| ISO 15977 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body and a steel... | |
| ISO 15978 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body and a steel... | |
| ISO 15979 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel... | |
| ISO 15980 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel... | |
| ISO 15981 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and an... | |
| ISO 15982 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body (AlA) and an... | |
| ISO 15983 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and... | |
| ISO 15984 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and... | |
| ISO 15985:2004 specifies a method for the evaluation of the ultimate anaerobic biodegradability of plastics based on organic compounds under high-solids anaerobic-digestion conditions by measurement of evolved biogas and the... | |
| ISO 15987:2003 specifies biaxially oriented transparent polyamide (nylon) films, mainly used for packaging, either alone and/or as laminated film with other films. | |
| ISO 15988:2003 specifies biaxially oriented transparent polyethylene terephthalate (PET) films, mainly used for packaging, either alone and/or as laminated film with other films. | |
| ISO 15989:2004 specifies a method of measuring the contact angle of water droplets on corona-treated polymer film surfaces and subsequently determining the wetting tension of the film. The method is... | |
| ISO 15995:2005 specifies the requirements for design, specification and type testing of dedicated LPG manually operated cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up... | |
| ISO 15996:2005 specifies requirements for residual pressure valves, with or without a non-return function, for gas cylinders and the methods of testing such valves, for type approval. ISO 15996:2005 is... | |
| ISO 15998:2008 specifies performance criteria and tests for functional safety of safety-related machine-control systems (MCS) using electronic components in earth-moving machinery and its equipment, as defined in ISO 6165. | |
| ISO 16000-10:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing under defined... | |
| ISO 16000-12:2008 specifies the planning of measurements for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) also known as polychlorinated oxanthrenes, polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) in... | |
| ISO 16000-13:2008 specifies sampling and preparation of sampling media for dioxin-like polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in indoor air. The method incorporates a... | |
| ISO 16000-14:2009 specifies extraction, clean-up, and analysis procedures for the determination of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) collected from indoor air on particle... | |
| ISO 16000-15:2008 specifies the planning of nitrogen dioxide indoor pollution measurements. In the case of indoor air measurements, the careful planning of sampling and the entire measurement strategy are of... | |
| ISO 16000-16:2008 specifies requirements for long-term (0,5 h to several hours) sampling of moulds in indoor air by filtration. Following the instructions given, a sample is obtained for subsequent detection... | |
| ISO 16000-17:2008 specifies a method for the detection and enumeration of moulds by cultivation after sampling by impaction according to ISO 16000-18:— or by filtration according to ISO 16000-16. It... | |
| ISO 16000-18:2011 specifies requirements for short-term (1 min to 10 min) sampling of moulds in indoor air by impaction on solid agar media. Following the instructions given, a sample is... | |
| ISO 16000-19:2012 describes the measurement strategy for the detection of fungi in indoor environments. ISO 16000-19:2012 describes suitable sampling and analysis methods together with a description of the applicability and... | |
| ISO 16000-1:2004 is intended to aid the planning of indoor pollution monitoring. Before a sampling strategy is devised for indoor air monitoring, it is necessary to clarify for what purposes,... | |
| ISO 16000-23:2009 specifies a general laboratory test method for evaluating the reduction of formaldehyde concentrations by sorptive building materials. This method applies to boards, wallpapers, carpets, paint products, and other... | |
| ISO 16000-24:2009 specifies a general laboratory test method for evaluating the reduction in concentration of volatile organic compounds (VOCs) (except formaldehyde) by sorptive building materials. This method applies to boards,... | |
| ISO 16000-25:2011 specifies a test method for determination of the area specific emission rate of semi-volatile organic compounds (SVOCs) from newly produced building products or furnishings under defined climate conditions... | |
| ISO 16000-26:2012 specifies the planning of carbon dioxide indoor pollution measurements. In the case of indoor air measurements, the careful planning of sampling and the entire measurement strategy are of... | |
| ISO 16000-2:2004 is intended as an aid to planning formaldehyde indoor pollution measurements. In the case of indoor air measurements, the careful planning of sampling and the entire measurement strategy... | |
| ISO 16000-4:2011 specifies a determination of formaldehyde in indoor air using a diffusive sampler with solvent desorption and high performance liquid chromatography (HPLC). The test method is applicable to the... | |
| ISO 16000-5:2007 is intended as an aid to planning volatile organic compound (VOC) indoor pollution measurements. In the case of indoor air measurements, the careful planning of sampling and the... | |
| ISO 16000-6:2011 specifies a method for determination of volatile organic compounds (VOCs) in indoor air and in air sampled for the determination of the emission of VOCs from building products... | |
| ISO 16000-7:2007 specifies procedures to be used in planning of air measurements to determine the concentrations of asbestos in indoor atmospheres. Careful planning of the measurement strategy is important, because... | |
| ISO 16000-8:2007 describes the use of single tracer gas for determining the local mean age of air as an indicator of ventilation conditions in a building. The procedures include concentration... | |
| ISO 16000-9:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing under defined... | |
| ISO 16001:2008 specifies general requirements and describes methods for evaluating and testing the performance of hazard detection systems (HDS) and visual aids (VA) used on earth-moving machines. It covers the... | |
| ISO 16002:2004 describes methods for the detection by trapping of live invertebrates in cereal grains and pulses stored in bags or in bulk. | |
| ISO 16003:2008 specifies requirements and describes test methods for the following components used in gaseous fire-extinguishing systems: container valve assemblies, which include container valve, actuator and, if applicable, a diptube; | |
| ISO 16004:2005 specifies dimensional interface and unobstructed space requirements applicable to the aircraft mating section of either passenger boarding bridges or passenger transfer vehicles used at airports for boarding and... | |
| ISO 16010:2005 specifies requirements for elastomeric materials used in seals for supply pipes and fittings, ancillaries and valves at operating temperatures in general from -5 °C up to 50 °C... | |
| ISO 16012:2004 specifies measuring equipment and procedures for the determination of the linear dimensions of solid plastics test specimens. | |
| ISO 16014-1:2012 specifies a general method for determining the average molecular mass and the molecular mass distribution of polymers using size-exclusion chromatography (SEC). The average molecular mass and the molecular... | |
| ISO 16014-2:2012 specifies a method for determining the average molecular mass and the molecular mass distribution of polymers using size-exclusion chromatography (SEC). The average molecular mass and the molecular mass... | |
| ISO 16014-3:2012 specifies a method for determining the average molecular mass and the molecular mass distribution of polymers by size-exclusion chromatography (SEC) using an organic eluent at a temperature lower... | |
| ISO 16014-4:2012 specifies a method for determining the average molecular mass and the molecular mass distribution of polymers by size-exclusion chromatography (SEC) using an organic eluent at temperatures between 60... | |
| ISO 16017-2:2003 gives general guidance for the sampling and analysis of volatile organic compounds (VOCs) in air. It is applicable to indoor, ambient and workplace air. ISO 16017-2:2003 is applicable... | |
| ISO 16020:2005 defines terms and symbols to be used in the field of reinforcing and prestressing steel for concrete. | |
| ISO 16024:2005 specifies design and performance requirements, test methods, user instructions, marking and labelling as appropriate, of flexible horizontal lifeline systems for use at any one time by up to... | |
| ISO/TC 107 Metallic and other inorganic coatings | |
| ISO/TC 130 Graphic technology | |
| ISO15629 gives guidelines on nails and staples used in the assembly of new and repair of used wooden flat pallets. For the purposes of this International Standard the term fasteners... | |
| Leather -- Tests for colour fastness -- Colour fastness to machine washing | |
| Leather -- Tests for colour fastness -- Colour fastness to migration into plasticized poly(vinyl chloride) | |
| Leather -- Tests for colour fastness -- Colour fastness to mild washing | |
| Leather -- Tests for colour fastness -- Colour fastness to water spotting | |
| Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method | |
| Metallic and other inorganic coatings -- Electropolishing as a means of smoothing and passivating stainless steel | |
| Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour | |
| Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography | |
| Metallic materials -- Tensile testing at low temperature | |
| Microbeam analysis -- Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis | |
| Milling cutters for high speed machining -- Safety requirements | |
| Paints and varnishes -- Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases | |
| Paints, varnishes and binders -- Determination of MEQ value of water-based coating materials and binders | |
| Paints, varnishes and raw materials for paints and varnishes -- Sampling | |
| Paper and board -- Estimation of contraries | |
| Petroleum and natural gas industries -- Life cycle costing -- Part 1: Methodology | |
| Petroleum and natural gas industries -- Life-cycle costing -- Part 2: Guidance on application of methodology and calculation methods | |
| Petroleum and natural gas industries -- Life-cycle costing -- Part 3: Implementation guidelines | |
| Petroleum and natural gas industries -- Offshore production installations -- Requirements and guidelines for emergency response | |
| Petroleum and related products -- Determination of chlorine and bromine content -- Wavelength-dispersiv e X-ray fluorescence spectrometry | |
| Petroleum products -- Estimation of net specific energy of aviation turbine fuels using hydrogen content data | |
| Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection | |
| Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system | |
| Pneumatic fluid power -- Cylinders -- Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm | |
| Powered industrial trucks -- Safety signs and hazard pictorials -- General principles | |
| Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink | |
| PROFINET profiles | |
| Protective clothing for firefighters -- Laboratory test methods and performance requirements for protective clothing with a reflective outer surface | |
| Qualification testing of welders for underwater welding -- Part 1: Diver-welders for hyperbaric wet welding | |
| Qualification testing of welders for underwater welding -- Part 2: Diver-welders and welding operators for hyperbaric dry welding | |
| Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials | |
| Road construction and maintenance equipment -- Chippings spreaders -- Terminology and commercial specifications | |
| Road construction and maintenance equipment -- Road milling machinery -- Terminology and commercial specifications | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 10: Gas-flow adjuster | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 11: Gas/air mixer | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 12: Pressure relief valve (PRV) | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 13: Pressure relief device (PRD) | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 14: Excess flow valve | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 15: Gas-tight housing and ventilation hose | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 16: Rigid fuel line in stainless steel | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 17: Flexible fuel line | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 18: Filter | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 19: Fittings | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 1: General requirements and definitions | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 2: Performance and general test methods | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 3: Check valve | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 5: Manual cylinder valve | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 6: Automatic valve | |
| Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 8: Pressure indicator | |
| Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 1: Safety requirements | |
| Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 2: Test methods | |
| Road vehicles -- Diagnostic communication over Controller Area Network (DoCAN) -- Part 2: Transport protocol and network layer services | |
| Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser | |
| Rubber and rubber additives -- Determination of total sulfur content using an automatic analyser | |
| Seal-less rotodynamic pumps -- Class II -- Specification | |
| Ships and marine technology -- Fire resistance of hose assemblies -- Requirements for the test bench | |
| Ships and marine technology -- Fire resistance of hose assemblies -- Test methods | |
| Ships and marine technology -- Guidelines for implementation of a fleet management system network | |
| Ships and marine technology -- Hydrostatic release units | |
| Ships and marine technology -- Launching appliances for davit-launched lifeboats | |
| Small craft -- Inboard petrol engines -- Engine-mounted fuel and electrical components | |
| Space data and information transfer systems -- Standard formatted data units -- Referencing environment | |
| Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 2: Gas welding | |
| Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 11: Electron and laser beam welding | |
| Specifies a test method for determinig the number of insoluble and visible particles including all impurties and foreign particles in cellulose acetate. A test portion is dissolved in a mixture... | |
| Specifies methods of determining the sulfate and pyrite sulfur contents of coals, including brown coals and methods of calculating the amount of organic sulfur present. Replaces the first edition. | |
| Steel for the reinforcement of concrete -- Headed bars -- Part 1: Requirements | |
| Steel for the reinforcement of concrete -- Headed bars -- Part 2: Test methods | |
| Studies of the emission of volatile organic compounds from unused building products or furnishing in test chambers or cells require proper handling of the product prior to testing, and during... | |
| TC 131 Fluid power systems // SC 4 | |
| TC 135 Non-destructive testing // SC 4 | |
| TC 138 Plastics pipes, fittings and valves for the transport of fluids // SC 2 | |
| TC 138 Plastics pipes, fittings and valves for the transport of fluids // SC 3 | |
| TC 146 Air quality // SC 6 | |
| TC 184 Automation systems and integration // SC 5 | |
| TC 22 Road vehicles // SC 25 | |
| TC 27 Solid mineral fuels // SC 5 | |
| TC 44 Welding and allied processes // SC 10 | |
| TC 44 Welding and allied processes // SC 3 | |
| TC 46 Information and documentation // SC 4 | |
| Tea -- Determination of crude fibre content | |
| Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications | |
| Technical product documentation -- Protection notices for restricting the use of documents and products | |
| The method consists in destructing of organic matter by heating at 525 +/- 25 degrees centigrade to constant mass using a furnace, capable of being controlled. | |
| The method consists in extractiing of the total ash with hot water, filtration through ashless filter paper, ignition and weighing of the residue to determine the insoluble ash; calculation of... | |
| The method consists in grinding of the sample, and determination of the dry matter content of the ground sample by heating a test portion in an oven at 103 +/-2... | |
| The method consists in heating a test portion in an oven at 103 +/-2 degrees centigrade, to constant mass. | |
| The method consists in titrating of the filtrate from the determination of water-soluble ash, whith standard hydrochloric acid solution, using methyl orange as indicator. | |
| The method consists in treating of the total ash (obtained as described in ISO 1575) with hydrochloric acid solution, filtrating, igniting and weighing of the residue. | |
| The method is applicable to unalloyed coppers not containing elements providing insoluble residues in the electrolytic solution. Annex A gives test portions of test sample and of copper precipitate. Annex... | |
| The method is applicable when an agreement has previously been reached between the interested parties for the removal of two representative samples during filling of the tank-wagon at the manufacturer's... | |
| The procedures in ISO 15484:2008 apply to disc brake pads and drum brake linings for motor vehicles and describe systematic processes for the quality assurance of such brake linings. In... | |
| The purpose of ISO 15863:2003 is to provide spacecraft (SC) and launch vehicle (LV) organizations with the general format for presenting the interface control document (ICD) that verifies and controls... | |
| The purpose of this International Standard is to achieve a high degree of harmonization in reporting results of on-site recording, sampling, on-site sample analyses and laboratory analyses of soil samples. | |
| Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding | |
| This document provides a framework guide for the development and use of intermediate-scale fire tests for products made of or containing plastics. The guidance identifies typical applications of plastics products... | |
| This International Standard defines terms relating to chromatic aberrations and indicates the mathematical relationships between those terms. It also gives general guidance for the measurement of chromatic aberrations and is... | |
| This International Standard describes a test procedure for assessing the protection offered by coatings of paints or varnishes on aluminium and aluminium alloys against corrosion arising from a scribe mark... | |
| This International Standard establishes rules for the symbolic presentation and indication of adhesive, fold and pressed joints in technical drawings. | |
| This International Standard establishes the terminology for soil stabilizers used in road construction and pavement works. It provides the terminology for the machine and its components, also the definitions of... | |
| This International Standard specifies performance and testing requirements for the gas inflation systems for inflatable life-saving appliances complying with the requirements of the 1974 Safety of Life at Sea Convention... | |
| This International Standard specifies test methods for the measurement, determination and declaration of the noise emission from hand-held non-electric power tools. It prescribes the loading and working conditions under which... | |
| This method is intended for cellulose acetate having an acetic acid yield of 54 % ± 2.5 %. It may also be applicable to other transparent plastics which are not... | |
| This method is suitable for cellulose acetate which does not contain additives, fillers, etc. which may interfere with the determination of viscosity. It is suitable for cellulose acetate having an... | |
| This part of ISO 15500 provides tests and requirements for the gas injector, a compressed natural gas fuel system component intended for use on the types of motor vehicles defined... | |
| This part of ISO 15587 specifies a method for extracting trace elements from a water sample using aqua regia as a digestion agent. The method is applicable to all types... | |
| This part of ISO 15587 specifies a method for extracting trace elements from a water sample using nitric acid as a digestion agent. The method is applicable to all types... | |
| This part of ISO 15750 specifies the characteristics and dimensions of non-removable head (tight head) drums, manufactured from steel sheet, having a total capacity of 212 l, 216,5 l and... | |
| This part of ISO 15750 specifies the characteristics and dimensions of removable head (open head) drums, manufactured from steel sheet, having a total capacity of 208 l, 210 l and... | |
| This part of ISO 15750 specifies the characteristics, dimensions and finish of the inserted flange-type closure systems used for steel drums. | |
| This part of ISO 16000 specifies a determination of formaldehyde (HCHO) and other carbonyl compounds (aldehydes and ketones) in air. The method is specific to formaldehyde but, with modification, at... | |
| Tools for moulding -- Thermal insulating sheets for injection moulds | |
| Urine-absorbing aids -- Basic principles for evaluation of single-use adult-incontinence-a bsorbing aids from the perspective of users and caregivers | |
| Vitreous and porcelain enamels -- Determination of scratch resistance of enamel finishes | |
| Water quality -- Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection | |
| Water quality -- Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization | |
| Water quality -- Determination of the inhibitory effect of water constituents on the growth of activated sludge microorganisms | |
| Welding -- Friction welding of metallic materials | |
| Welding consumables -- Test methods -- Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys | |
| Welding consumables -- Test methods -- Part 2: Preparation of single-run and two-run technique test specimens in steel |
| << Prev | Next >> |