ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 1 Scope ISO 16348:2003 specifies appearance and its associated terms and outlines the principles involved in validating appearance when it is specified as a requirement of metallic and other inorganic... | |
| A<1,?,'FileAttribute s'=A<1,?,'CreatedDat e'=D/2011/10/21:10:3 6:29,'Creator'=?,'Da taForkSize'=225,'Mod ifiedDate'=D/2011/6/ 29:9:29:30,'Name'='C 053398e Abstract.html','Plat form'=2,'ResourceFor kSize'=0,'Type'='tex t/html','Version' | |
| Acoustics -- Test code for the measurement of airborne noise emitted by rotating electrical machines | |
| Additional alloys | |
| Aerospace -- Rivets, solid -- Test method | |
| Aids for ostomy and incontinence -- Irrigation sets -- Requirements and test methods | |
| Amendment 1 of ISO 1651/1974 concerns cover page and pages 1, 2 and 3. Modify the general title as follows: "Hardmetal (carbide) core tube drawing plugs - Dimensions". On page... | |
| Applies for the determination of natural and synthetic materials having a molar ratio sodium fluoride/aluminium trifluoride between 3 and 1,7 approximately. The method is applicable to products having an iron... | |
| Cancels and replaces the first edition (1980). Specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PS moulding and... | |
| Cinematography -- 8 mm Type S motion-picture raw stock film -- Cutting and perforating dimensions | |
| Cinematography -- Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture -- Positions... | |
| Concerns cover page and page 1. Modify the title as follows: "Wire, bar and tube drawing dies with hardmetal (carbide) core - Specifications". Modify the first sentence on page 1... | |
| Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe | |
| Corrosion of metals and alloys -- Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process -- "Dry" and "wet" conditions at constant absolute humidity | |
| Cranes and hoists -- Selection of wire ropes, drums and sheaves | |
| Deals with the method given for uncompounded natural rubber and uncompounded synthetic rubbers which do not contain chlorine, and the corresponding uncompounding latices. Principle, reagents, apparatus, sampling and procedure, especially... | |
| Defines the characteristics of general-purpose unpunched paper cards to be used information interchange between different punched card devices. References: ISO/R534; ISO/R 536; ISO/R 1974; ISO/R 2144; ISO 2493; ISO 2494; | |
| Durability -- Service life design of concrete structures | |
| Evaluation of thickness, density and interface width of thin films by X-ray reflectometry -- Instrumental requirements, alignment and positioning, data collection, data analysis and reporting | |
| Financial services -- Requirements for message authentication using symmetric techniques | |
| Fire safety engineering -- Requirements governing algebraic equations -- Vent flows | |
| Gives a method for the determination of the moisture content of native or modified starch using oven-drying at 130 °C under atmospheric pressure. | |
| Graphic technology -- Extensible metadata platform (XMP) specification -- Part 1: Data model, serialization and core properties | |
| Graphic technology -- Quantification and communication for calculating the carbon footprint of print media products | |
| Implants for surgery -- Minimum data sets for surgical implants | |
| ISO 16031-1 specifies the inside diameters, cross-sections, tolerances and size identification codes for inch O-rings used in aerospace fluid systems. The dimensions and high precision tolerances specified in ISO 16031-1... | |
| ISO 16031-2:2003 specifies the inside diameters, cross-sections, tolerances and size identification codes for inch O-rings used in aerospace fluid systems intended for use in non-hydraulic systems. ISO 16031-2:2003 is applicable,... | |
| ISO 16032:2004 specifies methods for measuring the sound-pressure level produced by service equipment attached to or installed in buildings. It specifically covers measurements on sanitary installations, mechanical ventilation, heating and... | |
| ISO 16035:2003 specifies a method for the determination of low-boiling halogenated hydrocarbons by means of static headspace gas chromatography. Halogenated hydrocarbon solvents are ubiquitously distributed toxic compounds. The method is... | |
| ISO 16038:2005 provides guidance on using ISO 4074 and addresses quality issues to be considered during the development, manufacture, quality verification and procurement of condoms. It encompasses the aspects of... | |
| ISO 16039:2004 establishes definitions, terminology and the content of commercial literature specifications for mobile, self-operating machines used for placing and finishing cement concrete, commonly called "slipform pavers", which mould concrete... | |
| ISO 16042:2007 describes recommended procedures for the use of CRMs that have been prepared and certified in accordance with ISO 11459. Such CRMs are used by laboratories to carry out... | |
| ISO 16047:2005 specifies the conditions for carrying out torque/clamp force tests on threaded fasteners and related parts. It is applicable, basically, to bolts, screws, studs and nuts made of carbon... | |
| ISO 16048 specifies the methods most often used for passivation of corrosion-resistant stainless steel fasteners. Typical anodic dissolution behaviour of an active-passive-trans passive metal is given in an annex. | |
| ISO 16049-1:2013 specifies the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical rated ultimate tension load... | |
| ISO 16049-2:2013 provides general utilization guidelines and calculation methods adequate to guarantee the effectiveness and ultimate load strength of tie-down/lashing arrangements performed to restrain cargo on board civil transport aircraft... | |
| ISO 16050:2003 specifies a reverse-phase high-performance liquid chromatographic method, with immunoaffinity column clean-up and post-column derivatization, for the determination of aflatoxins in cereals, nuts and derived products. The limit of... | |
| ISO 16053:2010 specifies a natural weathering test for exterior wood coating systems mainly intended for decoration and protection of planed and sawn wood. The test provides a means of evaluating... | |
| ISO 16055:2012 describes the requirements for a monitor test piece as well as its use. | |
| ISO 16057:2002 specifies the nominal dimensions of vulcanized fibre discs. These vulcanized fibre discs are intended for use on hand-held grinding machines. Vulcanized fibre discs are for use with support... | |
| ISO 16059:2007 defines the elements of syntax, including the structure and associated content, for the purpose of coded data exchange and the need for harmonizing existing and future dentistry codification... | |
| ISO 16061:2008 specifies general requirements for instruments to be used in association with non-active surgical implants. These requirements apply to instruments when they are manufactured and when they are resupplied... | |
| ISO 16063-15:2006 specifies the instrumentation and procedures used for primary angular vibration calibration of angular transducers, i.e. angular accelerometers, angular velocity transducers and rotational angle transducers (with or without amplifier)... | |
| ISO 16063-21:2003 describes the calibration of rectilinear vibration transducers by comparison. Although it mainly describes calibration using direct comparison to a standard calibrated by primary methods, the methods described can... | |
| ISO 16063-22:2005 specifies the instrumentation and procedures to be used for secondary shock calibration of rectilinear transducers, using a reference acceleration, velocity or force measurement for the time-dependent shock. The... | |
| ISO 16063-31:2009 specifies details of the instrumentation and methods to be used for transverse vibration sensitivity testing. It applies to rectilinear velocity and acceleration transducers. The methods and procedures specified... | |
| ISO 16063-41:2011 specifies the instrumentation and procedures for performing primary and secondary calibrations of rectilinear laser vibrometers in the frequency range typically between 0,4 Hz and 50 kHz. It specifies... | |
| ISO 16065-2:2007 specifies a method for determining fibre length by automated optical analysis, using unpolarized light. The method is applicable to all kinds of pulp. However, fibrous particles shorter than... | |
| ISO 16067-1:2003 specifies methods for measuring and reporting the spatial resolution of electronic scanners for continuous tone photographic prints. It is applicable to both monochrome and colour print scanners. | |
| ISO 16067-2:2004 specifies methods for measuring and reporting the spatial resolution of electronic scanners for continuous tone photographic negatives and reversal (e.g. slide) films. It applies to both monochrome and... | |
| ISO 16069:2004 describes the principles governing the design and application of visual components used to create a safety way guidance system (SWGS). ISO 16069:2004 contains general principles valid both for... | |
| ISO 16070:2005 provides the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural... | |
| ISO 16073:2011 specifies the minimum performance requirements and methods of test for personal protective equipment (PPE) covering the torso, neck, arms, hands, legs, feet, head, eyes and hearing for wildland... | |
| ISO 16091:2002 describes the set of management requirements needed to identify and provide logistic support, so the customer can operate and maintain a product in its operational environment for the... | |
| ISO 16100-1:2009 specifies a framework for the interoperability of a set of software products used in the manufacturing domain and to facilitate its integration into a manufacturing application. This framework... | |
| ISO 16100-2:2003 specifies a methodology for constructing profiles of manufacturing software capabilities, and is applicable to software products used in the manufacturing domain. It is an integral part of ISO... | |
| ISO 16100-3:2005 specifies requirements for interface services and protocols used to access and edit capability profiles and associated templates used in the capability profiling method defined in Clause 5 of... | |
| ISO 16100-4:2006 specifies the test method, the associated test criteria and the statement format used to evaluate and declare the degree of conformance of an implementation, i.e. a unit under... | |
| ISO 16100-5:2009 specifies the methods and rules for matching existing manufacturing software unit (MSU) capability profiles and required capability profiles derived from multiple capability class structures. The methods and rules... | |
| ISO 16100-6:2011 defines the detailed interface services and protocols used in a matching method based on multiple capability class structures. ISO 16100-6:2011 also defines a Capability Profile Template Interface (CPTI)... | |
| ISO 16103:2005 specifies the requirements and test methods for the production of recycled plastics materials to be used for packagings for the transport of dangerous goods. This includes guidance on... | |
| ISO 16104:2003 specifies the design type test requirements for packagings intended for use in the transport of dangerous goods. | |
| ISO 16106:2006 gives guidance on quality management provisions applicable to the manufacture, measuring and monitoring of design type approved dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. ISO... | |
| ISO 16107:2007 specifies methods for evaluation of sampler performance in terms of workplace conditions: wind speed, humidity, temperature, atmospheric pressure, and analyte variation. The concise set of experiments specified aims... | |
| ISO 16110-1:2007 applies to packaged, self-contained or factory matched hydrogen generation systems with a capacity of less than 400 m3/h at 0 °C and 101,325 kPa, herein referred... | |
| ISO 16110-2:2010 provides test procedures for determining the performance of packaged, self-contained or factory matched hydrogen generation systems with a capacity less than 400 m3/h at 0 °C... | |
| ISO 16111:2008 defines the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems, referred to as “metal hydride assemblies” (MH assemblies) which utilize shells... | |
| ISO 16112:2006 specifies five grades of compacted (vermicular) graphite cast irons. ISO 16112:2006 specifies five grades based on the minimum mechanical properties measured on machined test pieces prepared from separately... | |
| ISO 16119-1:2013 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including... | |
| ISO 16119-2:2013 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk... | |
| ISO 16119-3:2013 specifies requirements and the means for their verification for the design and performance of sprayers for bush, tree and similar crops, as defined in 3.1, with regard to... | |
| ISO 16120-2:2011 is applicable to general-purpose steel wire rod for drawing and/or cold rolling. | |
| ISO 16120-3:2011 is applicable to wire rod made of low-carbon, low-silicon, rimmed and rimmed substitute steel with high ductility intended for drawing and/or cold rolling. | |
| ISO 16120-4:2011 is applicable to steel wire rod with improved characteristics intended for drawing and/or cold rolling. | |
| ISO 16120:2011 is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another... | |
| ISO 16121-1:2012 applies to the driver's workplace in low-floor line-service buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having... | |
| ISO 16121-2:2011 specifies the requirements for the driver's field of view to the area in front of the vehicle, to the entrance opposite the driver's seat and the interior compartment. | |
| ISO 16121-3:2011 specifies requirements for the location of information devices and controls. ISO 16121-3:2011 applies to the driver's workplace in low-floor buses designed for the carriage of passengers, comprising more... | |
| ISO 16121-4:2011 specifies minimum requirements for the cabin environment. ISO 16121-4:2011 applies to the driver's workplace in low-floor line-service buses designed for the carriage of passengers, comprising more than eight... | |
| ISO 16124:2004 specifies dimensions and tolerances to the dimensions applicable to steel wire rod as defined in ISO 6929:1987. | |
| ISO 16131:2012 specifies sampling and test methods, and gives recommended values for, upholstery leather for furniture. | |
| ISO 16132:2004 specifies the requirements for seal coatings for factory application to the surfaces of cement mortar linings, which are factory applied to the interior of ductile iron pipes and... | |
| ISO 16133:2004 gives general guidance on the selection of procedures for the establishment and maintenance of programmes for long-term monitoring of soil quality. It takes into account the large number... | |
| ISO 16134:2006 specifies the design of earthquake- and subsidence-resistant ductile iron pipelines suitable for use in areas where seismic activity and land subsidence can be expected. It provides a means... | |
| ISO 16135:2006 specifies requirements for the design, functional characteristics and manufacture of ball valves made of thermoplastics materials intended for isolating service, for control service, and to divert/mix fluids, their... | |
| ISO 16136:2006 specifies requirements for the design, functional characteristics and manufacture of butterfly valves made of thermoplastics materials intended for isolating and control service, their connection to the pipe system,... | |
| ISO 16137:2006 specifies requirements for the design, functional characteristics and manufacture of check valves made of thermoplastics materials intended to allow the flow of liquid fluids through the valve in... | |
| ISO 16138:2006 specifies requirements for the design, functional characteristics and manufacture of diaphragm valves made of thermoplastics materials intended for isolating and control service, their connection to the pipe system,... | |
| ISO 16139:2006 specifies requirements for the design, functional characteristics and manufacture of gate valves made of thermoplastics materials intended for isolating service, their connection to the pipe system, the body... | |
| ISO 16140:2003 defines the general principle and the technical protocol for the validation of alternative methods in the field of microbiological analysis of food, animal feeding stuffs and environmental and... | |
| ISO 16143-1:2004 specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip for general purposes made of the most important corrosion resistant stainless steel grades. In addition... | |
| ISO 16143-2:2004 specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods and sections for general purposes made of the most important corrosion-resistant stainless steel grades. | |
| ISO 16143-3:2005 specifies requirements for stainless steel wire for common use for which no product standard exists. It includes round, flat and shaped wire (such as square, hexagonal or rectangular... | |
| ISO 16147:2002 establishes requirements for the design and installation of engine-mounted fuel and electrical components on diesel inboard-mounted engines for minimizing fuel leakage and the risk of and/or the spread... | |
| ISO 16148:2006 is a guideline for using acoustic emission testing (AT) during re-qualification of seamless steel cylinders and tubes of water capacity up to 3 000 l used for compressed... | |
| ISO 16149:2006 specifies the requirements for unplasticized polyvinyl chloride (PVC) piping, used to supply and to distribute low-pressure irrigation water through gates. It is applicable to PVC piping with diameters... | |
| ISO 16151:2005 specifies two accelerated corrosion-test procedures, Methods A and B, for the comparative evaluation of metallic materials with or without permanent corrosion protection or temporary corrosion protection in outdoor... | |
| ISO 16152:2005 specifies a method for determining the mass fraction of a polypropylene homopolymer or copolymer which is soluble in xylene at 25 °C. | |
| ISO 16154:2005 specifies the characteristics and installation of lighting and marking devices on agricultural and forestry tractors, self-propelled agricultural machines, agricultural trailers and trailed machines when operated on public roads. | |
| ISO 16155:2006 is applicable where computer equipment is used to perform functions related to loading and associated ship safety issues, such as, but not limited to, intact and damaged stability... | |
| ISO 16156:2004 sets out the requirements and/or measures to remove the hazards and limit the risk on work holding chucks. It covers all the hazards relevant to this component. The... | |
| ISO 16159:2012 establishes procedures for the analysis of failures that occur during the acceptance testing or operation of launch pad and integration site facilities, systems and equipment. The procedures define... | |
| ISO 16160:2012 applies to dimensional and shape tolerances for all hot-rolled steel sheet products. | |
| ISO 16162:2012 applies to dimensional and shape tolerances for all cold-rolled steel sheet products. | |
| ISO 16163:2012 applies to dimensional and shape tolerances for all continuously hot-dipped coated steel sheet products. | |
| ISO 16165:2013 contains terms and definitions relating to oil spills and their control. It provides standardized terminology relating to oil spill response, defined as the broad range of activities related... | |
| ISO 16175-1 establishes fundamental principles and functional requirements for software used to create and manage digital records in office environments. It is intended to be used in conjunction with ISO... | |
| ISO 16175-2:2011 is applicable to products that are often termed "electronic records management systems" or "enterprise content management systems". ISO 16175-2:2011 uses the term digital records management systems for those... | |
| ISO 16175-3:2010 specifies general requirements and guidelines for records management and gives guidelines for the appropriate identification and management of evidence (records) of business activities transacted through business systems. It... | |
| ISO 16177:2012 specifies a test method for determining the resistance of a component or material to crack initiation and growth due to repeated flexing. The method is mainly applicable to... | |
| ISO 16180:2013 specifies requirements and gives guidelines for the placement, installation and visibility of navigation lights as described in COLREG for recreational craft of less than 24 m in length... | |
| ISO 16183 specifies methods for the measurement and evaluation of gaseous and particulate exhaust emissions from heavy-duty engines under transient conditions on a test bed. The procedures it defines can... | |
| ISO 16187:2013 specifies quantitative test methods to evaluate the antibacterial activity of footwear and components. It is applicable to all types of footwear and components employing non-diffusing antibacterial treatments. | |
| ISO 16191:2013 specifies a method for determining the toxicity of environmental samples on the growth of Myriophyllum aquaticum. The method described is applicable to natural fresh water sediment and... | |
| ISO 16192:2010 outlines lessons learned principles and guidelines that are applicable in all space project activities (management, technical, quality, cost and schedule). The application of ISO 16192:2010 is intended to... | |
| ISO 16201:2006 specifies functional and technical requirements and test methods for environmental control systems intended for use to alleviate or compensate for a disability. Such systems are also known as... | |
| ISO 16212:2008 gives general guidelines for enumeration of yeast and mould present in cosmetics, by counting the colonies on selective agar medium after aerobic incubation. In order to ensure product... | |
| ISO 16220:2005 specifies the chemical composition of magnesium alloy ingots. It also specifies the chemical composition of magnesium alloy castings and the mechanical properties of separately cast samples of these... | |
| ISO 16231-1:2013 specifies principles for the assessment of stability with respect to the design and construction of self-propelled ride-on machines used in agriculture and the hazard of rolling over or... | |
| ISO 16232-10:2007 defines the rules and the forms of expression and presentation of the results of measurements of particulate cleanliness of components for the fluid circuits of motor vehicles. It... | |
| ISO 16232-1:2007 defines the vocabulary used in the characterization and measurement of particulate contamination of parts, components, sub-assemblies and assemblies constituting the fluid circuits of internal combustion engines of road... | |
| ISO 16232-2:2007 describes the principles of extraction of contaminants from a component by the agitation method. It is preferably applied to components that are hollow and are suited to being... | |
| ISO 16232-3:2007 describes the principles of extraction of contaminants from a component by pressure rinsing. It is preferably applied to components of which the surface to be examined is accessible... | |
| ISO 16232-4:2007 describes the principles of extraction of contaminants from a component either by immersion in an ultrasonic bath or by applying ultrasonic vibrations directly via sonotrodes. It is preferably... | |
| ISO 16232-5:2007 describes the principles of extraction of contaminants by test on a laboratory functional test bench with the test liquid flowing under pressure or under vacuum. It is applicable... | |
| ISO 16232-7:2007 defines methods for determining the size and number of contaminant particles, which have been extracted from components and deposited on the surface of a membrane filter, as determined... | |
| ISO 16232-8:2007 describes a method for determining the nature of contaminant particles by identifying their elemental chemical composition using energy dispersive X-ray spectroscopy (EDX) in combination with a scanning electron... | |
| ISO 16232-9:2007 defines methods for determining the size distribution of particulate contaminants extracted from automotive components using techniques described in ISO 16232-3, ISO 16232-4 and ISO 16232-5, using automatic light... | |
| ISO 16234:2006 describes an open-loop test method for determining vehicle reactions during a straight-line braking manoeuvre on a surface having a split coefficient of friction. It applies to heavy vehicles,... | |
| ISO 16236:2013 specifies the test method for the determination of the volume and the concentration of the drainable volume of sprayers, in connection to the emptying of the diluted residue... | |
| ISO 16240:2005 specifies a method for the determination of the genotoxic potential of water and wastewater using the bacterial strains Salmonella typhimurium TA 100 and TA 98. This method includes... | |
| ISO 16241:2005 specifies a method for determining the resistance to slow crack growth of polyethylene (PE) materials for pipes and fitting products. | |
| ISO 16242:2011 specifies the minimum level of information to be reported by the analyst following the analysis of a test specimen using Auger electron spectroscopy (AES). It includes information that... | |
| ISO 16243:2011 specifies the minimum level of information to be reported by the analyst following the analysis of a test specimen using X‑ray photoelectron spectroscopy (XPS). It includes information that... | |
| ISO 16245:2009 specifies requirements for boxes and file covers, made of cellulosic material, to be used for long term storage of documents on paper or parchment. ISO 16245:2009 is applicable... | |
| ISO 16247:2004 specifies a helium test method for detecting and localising gas leaks in the exhaust systems of road vehicles equipped with an internal combustion engine, in order to improve... | |
| ISO 16249:2013 specifies specifies general principles for the creation of symbols of physical quantities, coefficients, and parameters for metal springs. It specifies the presentation of basic characters, subscripts, and application... | |
| ISO 16253:2007 specifies the general requirements and test methods for hard coatings obtained by vapour phase deposition processes, and intended to improve mainly the surface aspect and wear and corrosion... | |
| ISO 16256:2012 describes a method for testing the susceptibility to antifungal agents of yeasts, including Candida spp. and Cryptococcus neoformans, that cause infections. The reference method described here has not... | |
| ISO 16265:2009 specifies a procedure for the determination of the methylene blue active substances (MBAS) index, in the ranges 0,05 mg/l to 0,5 mg/l and 0,5 mg/l to 5,0 mg/l,... | |
| ISO 16266:2006 specifies a method for the isolation and enumeration of Pseudomonas aeruginosa in samples of bottled water by a membrane filtration technique. This method can also be applied to... | |
| ISO 16269-4:2010 provides detailed descriptions of sound statistical testing procedures and graphical data analysis methods for detecting outliers in data obtained from measurement processes. It recommends sound robust estimation and... | |
| ISO 16269-6:2005 describes procedures for establishing tolerance intervals that include at least a specified proportion of the population with a specified confidence level. Both one-sided and two-sided statistical tolerance intervals... | |
| ISO 16269-8:2004 specifies methods of determining prediction intervals for a single continuously distributed variable. These are ranges of values of the variable, derived from a random sample of size n... | |
| ISO 16273:2003 applies to operational and performance requirements and methods of testing for night vision equipment fitted to high-speed craft in accordance with the International Code of Safety for High-Speed... | |
| ISO 16276-1:2007 specifies procedures for assessing the fracture strength of a protective paint coating of any thickness on a steel substrate of thickness not less than 10 mm. The procedures... | |
| ISO 16276-2:2007 specifies procedures for rating the resistance of coating systems when a cut in the form of a right-angle lattice pattern (cross-cut) or in the form of an X... | |
| ISO 1628-1:2009 defines the general conditions for the determination of the reduced viscosity, intrinsic viscosity and K‑value of organic polymers in dilute solution. It defines the standard parameters that... | |
| ISO 1628-3:2010 defines particular conditions for determining the reduced viscosity (also known as viscosity number) and intrinsic viscosity of polyethylenes and polypropylenes at 135 °C in dilute solution. The viscosity... | |
| ISO 16282:2007 specifies a method intended primarily for the determination of the abrasion resistance of shaped refractory materials at ambient temperature. It can also be used for unshaped refractory materials. | |
| ISO 16284:2006 establishes a method by which machines and computer software systems used in the fabrication of ophthalmic lenses can exchange information. | |
| ISO 16287:2005 specifies the dimensions and tolerances for inserted thermoplastic bushes used as plain bearings with or without lubrication grooves in accordance with ISO 12128. These thermoplastic bushes are dimensionally... | |
| ISO 16293-1:2008 defines and classifies basic soda-lime silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria. Specific dimensions and dimensional... | |
| ISO 16297|IDF161:2013 gives guidelines for the evaluation of instrumental alternative methods for total bacterial count in raw milk from animals of different species. | |
| ISO 1629:2013 establishes a system of symbols for the basic rubbers in both dry and latex forms, based on the chemical composition of the polymer chain. The purpose is to... | |
| ISO 16304:2013 applies to the management of ship generated waste regulated by MARPOL that is discharged at ports and terminals. It also covers principles and issues that should be considered... | |
| ISO 16305|IDF 187:2005 specifies a method for the determination of the firmness of butter. The method is also applicable to butter prepared by recombination of milk components, aerated butter, and... | |
| ISO 16312-1:2010 provides technical criteria and guidance for evaluating physical fire models (i.e. laboratory combustion devices and operating protocols) used in effluent toxicity studies for obtaining data on the effluent... | |
| ISO 16322-1:2005 specifies a method of measuring the percentage of wale spirality change in weft-knitted jersey garments produced on knitting machines, following laundering. The results obtained from different procedures may... | |
| ISO 16322-2:2005 specifies three procedures (diagonal marking, inverted-T marking and mock-garment marking) to measure the spirality or torque of woven and knitted fabrics after laundering. The results obtained from different... | |
| ISO 16322-3:2005 specifies procedures to measure the spirality or torque of woven and knitted garments after laundering. The results obtained from different procedures may not be comparable. ISO 16322-3:2005 is... | |
| ISO 16329:2003 specifies the structure, performance, inspection and testing of heading control systems to be installed on board crafts operating under the following conditions: speed exceeding 30 kn and up... | |
| ISO 16330:2003 specifies the technical requirements, other than safety and testing, for reciprocating positive displacement pumps and pump units. It applies to pumps which utilize reciprocating motion derived from crankshafts... | |
| ISO 16331-1:2012 specifies procedures for checking compliance with performance specifications of handheld laser distance meters. | |
| ISO 16333:2011 specifies a tilt-table test method for estimating the steady-state rollover threshold of a heavy commercial vehicle or bus, i.e. the maximum lateral acceleration that the test vehicle could... | |
| ISO 16338:2013 specifies requirements for resistance spot and seam welding for aerospace applications. It does not apply if resistance welding is simply an intermediate operation and does not affect the... | |
| ISO 16346:2013 sets out ways of expressing the energy performance in an energy performance certificate of a building (including the technical building systems) and ways of expressing requirements as to... | |
| ISO 16358-1:2013 specifies the testing and calculating methods for seasonal performance factor of equipment covered by ISO 5151, ISO 13253 and ISO 15042. ISO 16358-1:2013 also specifies the seasonal performance... | |
| ISO 16358-2:2013 specifies the testing and calculating methods for seasonal performance factor of equipment covered by ISO 5151, ISO 13253 and ISO 15042. For the purposes of ISO 16358-2:2013, it... | |
| ISO 16358-3:2013 specifies the testing and calculating methods for seasonal performance factor of equipment covered by ISO 5151, ISO 13253 and ISO 15042. ISO 16358-3:2013 also specifies the seasonal performance... | |
| ISO 16362:2005 specifies sampling, cleanup and analysis procedures for the quantitative determination of low volatility (particle-bound) polycyclic aromatic hydrocarbons (PAHs) in ambient air. For sampling, a low-volume or a medium/high-volume... | |
| ISO 16363:2012 defines a recommended practice for assessing the trustworthiness of digital repositories. It is applicable to the entire range of digital repositories. ISO 16363:2012 can be used as a... | |
| ISO 16366:2008 specifies the main dimensions and tolerances of L-shaped guiding bars, to be used in press tools. It also specifies the designation of L-shaped guiding bars. | |
| ISO 16367:2008 specifies the main dimensions and tolerances of guiding plates, U- and V-blocks, to be used in press tools. It also specifies the designation of U- and V-blocks. | |
| ISO 16368:2010 specifies safety requirements and preventive measures, and the means for their verification, for all types and sizes of mobile elevating work platforms (MEWPs) intended for moving persons to... | |
| ISO 16369:2007 specifies particular safety requirements for mast-climbing work platforms (MCWP) which are temporarily installed and are manually or power-operated, and which are designed to be used by one or... | |
| ISO 16371-1:2011 specifies fundamental parameters of computed radiography systems with the aim of enabling satisfactory and repeatable results to be obtained economically. The techniques are based both on fundamental theory... | |
| ISO 16384:2012 provides guidance on the practices for custody transfer of dimethylether (DME) on board ships, at both the loading and the discharging ports. It covers such aspects of volumetric... | |
| ISO 16387:2004 describes a method for determining the effects of substances or contaminated soils on reproduction and on survival of the worm Enchytraeus albidus (Enchytraeidae). The animals are... | |
| ISO 16392:2007 describes a test method to measure the electrical resistance of pneumatic and solid tyres, under load, on a test rig. Static charges on a vehicle sometimes need to... | |
| ISO 16402:2008 applies to resin cements based on poly(methacrylic acid esters) and specifies the procedure for determining the fatigue behaviour of the polymerized cement. | |
| ISO 16408:2004 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as manufacturer's instructions for use, marking and/or labelling requirements. ISO... | |
| ISO 16409:2006 specifies requirements and test methods for performance criteria for manual interdental brushes with a round cross-section of the brush head. It also specifies the accompanying information, such as... | |
| ISO 1641-2:2011 specifies the general dimensions and designation of the following milling cutters with Morse taper and having a tapped hole: - end mills, flat-ended or ball-nosed - standard series... | |
| ISO 1641-3:2011 specifies the general dimensions and designation of the following milling cutters with 7/24 taper shanks: - end mills, flat-ended or ball-nosed - normal series and long series (manual... | |
| ISO 16412:2005 specifies utilization guidelines to be applied when preparing air cargo pallets for carriage on board civil transport aircraft. It identifies the various concerns to be taken into consideration... | |
| ISO 16415:2012 delineates and illustrates broad grade categories that specify essential features typically found in those categories based on commonalities of numerous national standards and grading rules used for non-structural... | |
| ISO 16419:2013 applies to semi-elaborated natural cork stoppers and colmated natural cork stoppers at the definitive dimensions stage, and finished natural cork stoppers and colmated natural cork stoppers ready to... | |
| ISO 1642-1:2002 specifies the general dimensions of the following milling cutters with plain cylindrical, flatted cylindrical and threaded shanks: end mills, flat-ended or ball-nosed -- standard series and long series; | |
| ISO 16420:2013 defines, for each type of ready-to-use, cylindrical cork stopper for still wines (colmated or non-colmated natural cork stoppers, agglomerate cork stoppers, 1 + 1 stoppers), a set of... | |
| ISO 16422:2006 specifies the general aspects of pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O), for piping systems intended to be used underground or above-ground where not exposed... | |
| ISO 16424:2012 is applicable to the evaluation of the homogeneity of Gd distribution within gadolinium fuel blends, and the determination of the Gd2O3 content in sintered fuel... | |
| ISO 16425:2013 specifies installation guidelines for ship communication networks for improving communication for shipboard equipment and systems that are independent from navigational equipment networks and engine-control networks. ISO 16425:2013 utilizes... | |
| ISO 16426 specifies requirements for a fastener quality assurance system to be met by the fastener manufacturers and distributors. These requirements are intended to reduce or prevent the production of... | |
| ISO 16428:2005 specifies standard environmental conditions for the testing of metallic materials intended for implantation, surgical implants, and medical devices. The testing conditions described simulate physiological conditions in a simplified... | |
| ISO 16429:2004 specifies a test method for measurements over extended time periods of the open-circuit potential of implant materials and surgically implantable devices immersed in a test environment related to... | |
| ISO 16432:2006 specifies requirements for embossed-resistance- projection welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel comprising two thicknesses of metal, where the maximum single... | |
| ISO 16438:2012 specifies requirements and test methods for reinforced and non-reinforced thermoplastic collapsible hoses, which are intended to be used as main and sub-main supply lines for the conveyance and... | |
| ISO 16446:2013 specifies a universal method for the joining of oil spill containment booms with dissimilar connectors through the use of a standard adaptor with prescribed mating specifications. ISO 16446:2013... | |
| ISO 16454:2007 is intended to be used for the determination of the stress/strain distribution and margins of safety in launch vehicles and spacecraft primary structure design. Liquid propellant engine structures,... | |
| ISO 16458:2004 is applicable to unmanned spacecraft and their supporting hardware including science instrument and payloads. It establishes the requirements for transportation by rail, road, air, and water and as... | |
| ISO 16462:2004 applies to inserts with insert shapes in accordance with ISO 883, ISO 3364, ISO 3365 and ISO 6987, tipped with cubic boron nitride (BL, BH, BC) or made... | |
| ISO 16463:2004 applies to inserts with insert shapes in accordance with ISO 883 and ISO 6987, tipped with polycrystalline diamond (DP). | |
| ISO 16467:2003 specifies the design type test requirements for Intermediate Bulk Containers (IBCs) intended for use in the transport of dangerous goods. | |
| ISO 16468:2005 specifies technical requirements for castings (steel, nickel alloys and cobalt alloys) produced by the investment-casting process. | |
| ISO 16472:2006 specifies methods for the determination of amylase-treated neutral detergent insoluble fibrous residue content in all types of animal feed. It includes a gravimetric routine method and a reference... | |
| ISO 16482-1:2013 specifies a method for determining the non-volatile content, by mass, of aqueous rosin-resin dispersions, using an oven. This method is applicable to resin dispersions having a softening point... | |
| ISO 16482-2:2013 specifies a method for determining the non-volatile content, by mass, of aqueous rosin-resin dispersions, using a microwave oven. This method is applicable to resin dispersions having a softening... | |
| ISO 16484-1:2010 specifies guiding principles for project design and implementation and for the integration of other systems into the building automation and control systems (BACS). ISO 16484-1:2010 specifies the phases... | |
| ISO 16484-2:2004 specifies the requirements for the hardware to perform the tasks within a building automation and control system (BACS). It provides the terms, definitions and abbreviations for the understanding... | |
| ISO 16484-3:2005 specifies the requirements for the overall functionality and engineering services to achieve building automation and control systems. It defines terms, which shall be used for specifications and it... | |
| ISO 16484-5:2012 defines data communication services and protocols for computer equipment used for monitoring and control of heating, ventilation, air-conditioning and refrigeration (HVAC&R) and other building systems. It defines, in... | |
| ISO 16484-6:2009 defines a standard method for verifying that an implementation of the BACnet protocol provides each capability claimed in its Protocol Implementation Conformance Statement (PICS) in conformance with the... | |
| ISO 16486-1:2012 specifies the general properties of unplasticized polyamide (PA-U) compounds for the manufacture of pipes, fittings and valves made from these compounds, intended to be buried and used for... | |
| ISO 16486-2:2012 specifies the physical and mechanical properties of pipes made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of... | |
| ISO 16486-3:2012 specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of... | |
| ISO 16486-5:2012 specifies the requirements of fitness for purpose of the unplasticized polyamide (PA-U) piping system, intended to be buried and used for the supply of gaseous fuels. It also... | |
| ISO 16486-6:2012 specifies a code of practice dealing with unplasticized polyamide (PA-U) piping systems intended to be buried outside buildings and used for the supply of gaseous fuels. It addresses... | |
| ISO 16495:2013 specifies the information needed for the design type testing of packaging, Intermediate Bulk Containers ( IBCs) and large packaging intended for use in the transport of dangerous goods. | |
| ISO 16498:2013 specifies the minimal data set to be recorded for a patient receiving dental implant treatment. This will comprise the locations and types of dental implant bodies, connecting components... | |
| ISO 16526-1:2011 specifies a method for the direct and absolute measurement of the average high voltage of constant potential (DC) X-ray systems on the secondary side of the high voltage... | |
| ISO 16526-2:2011 specifies a constancy check of a X-ray system where mainly the X-ray voltage is checked and also the tube current and the constitution of the target which can... | |
| ISO 16526-3:2011 specifies the test method for a non-invasive measurement of X-ray tube voltages using the energy spectrum of X-rays (spectrometric method). It covers the voltage range from 10 kV... | |
| ISO 16528-1:2007 defines the performance requirements for the construction of boilers and pressure vessels. It is not the intent of ISO 16528-1:2007 to address operation, maintenance and in-service inspection of... | |
| ISO 16528-2:2007 provides a procedure and a standard format for standard-issuing bodies to demonstrate that their standards fulfil the performance requirements of ISO 16528-1. | |
| ISO 1652:2011 specifies a method for the determination of the apparent viscosity of both natural rubber latex concentrate and synthetic rubber latices by the Brookfield method. The method is also... | |
| ISO 16531:2013 specifies methods for the alignment of the ion beam to ensure good depth resolution in sputter depth profiling and optimal cleaning of surfaces when using inert gas ions... | |
| ISO 16532-1:2008 specifies a method for the determination of the grease resistance of paper and board. The paper or board can be tested creased or uncreased. The test is primarily... | |
| ISO 16532-3:2010 specifies a method for the determination of the grease resistance of paper and board. It provides an accelerated comparison of the relative rates at which oils or greases,... | |
| ISO 16548:2012 gives guidance on towing procedures for cargo ships and passenger ships in emergency situations subject to SOLAS Regulation II-1/3-4. | |
| ISO 16549:2004 describes a method, using capacitance measuring equipment, for determining the unevenness of linear density along the length of textile strands. The method is applicable to tops, slivers, rovings,... | |
| ISO 16564:2004 specifies a method of determining the average molecular mass and the molecular-mass distribution of raw natural rubber dissolved in tetrahydrofuran. A set of polystyrene standards is used for... | |
| ISO 16565:2013 specifies the methods to be used to determine the content of 5 ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-d iene (EPDM) terpolymers in the 0,1 % to 10... | |
| ISO 16572:2008 specifies test methods for determining the structural properties of commercial wood-based and lignocellulosic fibrous panel products for use in load-bearing timber structures. These properties are intended for the... | |
| ISO 16582 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a... | |
| ISO 16583 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a... | |
| ISO 16584 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a... | |
| ISO 16585 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a... | |
| ISO 16586:2003 specifies a method for the gravimetric determination of soil water content as a volume fraction on the basis of the ratio of measured water content mass to known... | |
| ISO 16587:2004 describes the performance parameters for assessing the condition of structures, including types of measurement, factors for setting acceptable performance limits, data acquisition parameters for constructing uniform databases, and... | |
| ISO 16589 specifies seals utilizing sealing elements manufactured from suitably formulated compounds based on thermoplastic materials, such as polytetrafluoroethyl ene (PTFE). They are considered suitable for use under low-pressure conditions. | |
| ISO 16589 specifies seals utilizing sealing elements manufactured from suitably formulated compounds, based on thermoplastic materials, such as polytetrafluoroethyl ene (PTFE). They are considered suitable for use under low-pressure conditions. | |
| ISO 16589-2:2011 establishes the vocabulary for seals utilizing sealing elements manufactured from suitably formulated compounds, based on thermoplastic materials, such as polytetrafluoroethyl ene (PTFE) that are considered suitable for use... | |
| ISO 1658:2009 specifies physical and chemical tests on raw natural rubbers; standard materials, standard test formulae, equipment and processing methods for evaluating the vulcanization characteristics of natural rubber (NR). | |
| ISO 16591:2010 specifies a method for the determination of the sulfur content by oxidative microcoulometry of petroleum light and middle distillates with a final boiling point not higher than 400... | |
| ISO 16592:2012 gives guidance on a method for the determination of the carbon content in steels containing other alloying elements (less than 1 % to 2 % by mass) using... | |
| ISO 16602:2007 establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by ISO 16602:2007 include, but may not be... | |
| ISO 16603:2004 describes a laboratory test method for measuring the penetration resistance of clothing materials to blood and body fluids. This test method uses a synthetic blood in continuous contact... | |
| ISO 16604:2004 describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens. This test method uses a surrogate microbe under... | |
| ISO 16610-21:2011 specifies the metrological characteristics of the Gaussian filter, for the filtration of profiles. It specifies, in particular, how to separate long and short wave components of a surface... | |
| ISO 16610-85:2013 develops the terminology and concepts for areal morphological segmentation. In particular, it describes the watershed segmentation method and the Wolf pruning method. This document assumes a continuous surface. | |
| ISO 16612-1:2005 specifies the methods for the use of the Personalized Print Markup Language (PPML) and the Portable Document Format (PDF) for the exchange or identification of all elements necessary... | |
| ISO 16612-2:2010 defines the PDF/VT document format and methods to enable reliable document exchange for variable data and transactional (VT) printing. It uses the Portable Document Format (PDF) Version 1.6,... | |
| ISO 16622:2002 defines test methods of the performance of sonic anemometers/thermome ters which employ the inverse time measurement for velocity of sound along differently oriented paths. It is applicable to... | |
| ISO 16628:2008 provides requirements for size designation and labelling of tracheobronchial tubes, including colour coding of the bronchial cuff and its associated pilot balloon. Tracheobronchial tubes that include bronchus blockers... | |
| ISO 16630:2009 describes a method of determining the hole expansion ratio in metallic sheets and strips with a thickness range of 1,2 mm to 6,0 mm inclusive and a width... | |
| ISO 16632:2013 specifies a gas-chromatographic method for the determination of water content. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable... | |
| ISO 16634-1:2008 specifies a method for the determination of the total nitrogen content and the calculation of crude protein content of oilseeds and animal feeding stuffs. This method, like the... | |
| ISO 16635-1:2013 specifies requirements and test methods for hole punches for dental rubber dams. | |
| ISO 1663:2007 specifies a method of determining the water vapour transmission rate, water vapour permeance, water vapour permeability and water vapour diffusion resistance index for rigid cellular plastics. The scope... | |
| ISO 16642:2003 specifies a framework designed to provide guidance on the basic principles for representing data recorded in terminological data collections. This framework includes a meta-model and methods for describing... | |
| ISO 16650:2004 specifies the requirements and characteristics of round and flat wire used for strengthening the bead of all kinds of tyres. | |
| ISO 16653-1:2008 specifies the safety requirements for mobile elevating work platforms (MEWPs) with guardrail systems. It is intended to be used in conjunction with ISO 16368. It is applicable to... | |
| ISO 16653-2:2009 specifies the design, calculations, safety requirements and test methods for mobile elevating work platforms (MEWPs) with non‑conductive (insulating) components. It is intended to be used in conjunction with... | |
| ISO 16653:2011 specifies the design, calculations, safety requirements and test methods relevant to mobile elevating work platforms (MEWPs) suitable for orchard operations. It is intended to be used in conjunction... | |
| ISO 16656:2004 establishes mounting dimensions for single rod short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar), as required for interchangeability of... | |
| ISO 16657:2006 specifies the characteristics of a glass intended for use in the sensory analysis of the organoleptic attributes of odour, taste and flavour of virgin olive oils, for the... | |
| ISO 16663-1:2009 specifies a method for the determination of the size of the mesh opening of fishing nets, using an objective mesh gauge. It is applicable to active and passive... | |
| ISO 16663-2:2003 specifies a method for the determination of mesh length of fishing nets using a ruler. It is applicable to passive fishing gears. | |
| ISO 16664:2004 describes factors that may influence the composition of pure gases and homogeneous gas mixtures used for calibration purposes. ISO 16664:2004 only applies to gases or gas mixtures that... | |
| ISO 16665:2005 provides guidelines on the quantitative collection and processing of subtidal soft-bottom macrofaunal samples in marine waters. ISO 16665:2005 encompasses: development of the sampling programme; requirements for sampling equipment; | |
| ISO 16670:2003 is intended to provide a cyclic test method as a basis for the derivation of parameters which are required in seismic design of timber structures. The method includes... | |
| ISO 16671:2002 defines requirements with regards to safety for the intended performance, design attributes, preclinical and clinical evaluation, sterilization, product packaging, product labelling and the information supplied by the manufacturer. | |
| ISO 16672:2003 applies to ocular endotamponades (OEs), a group of non-solid implants used in ophthalmology to flatten and position a detached retina onto the choroid, or to tamponade the retina. | |
| ISO 16673:2007 provides a procedure for measuring visual demand due to the use of visual or visual-manual interfaces accessible to the driver while the vehicle is in motion. It applies... | |
| ISO 16698:2013 specifies the methods used for estimating geomagnetic indices for time intervals ranging from short-term (hours to a few months) to the long-term (months to years). Geomagnetic indices are... | |
| ISO 16700:2004 specifies a method for calibrating the magnification of images generated by a scanning electron microscope (SEM) using an appropriate reference material. This method is limited to magnifications determined... | |
| ISO 16701:2003 defines an accelerated corrosion test method to be used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly... | |
| ISO 16702:2002 describes methods for the determination of soil microbial respiration of aerobic, unsaturated soils. The methods are suitable for the determination of O2 uptake or CO2 release,... | |
| ISO 16702:2007 gives general guidance for the sampling and analysis of airborne organic isocyanate (NCO) compounds in workplace air. ISO 16702:2007 is appropriate for a wide range of organic compounds... | |
| ISO 16703:2004 specifies a method for the quantitative determination of the mineral oil (hydrocarbon) content in field-moist soil samples by gas chromatography. The method is applicable to mineral oil contents... | |
| ISO 16708:2006 specifies the functional requirements and principles for design, operation and re-qualification of pipelines in the petroleum and natural gas industries using reliability based limit state methods as permitted... | |
| ISO 16712:2005 specifies a method for the determination of acute toxicity to amphipods exposed over a period of 10 d to samples of contaminated marine or estuarine sediment, to chemical,... | |
| ISO 16714:2008 specifies a method, and defines related terms, for calculating the recyclability rate and the recoverability rate of earth-moving machinery as defined in ISO 6165, each expressed as a... | |
| ISO 16720:2005 specifies a method for pretreatment of soil samples by freeze-drying for subsequent analysis. ISO 16720:2005 is applicable to soil samples for subsequent determination of elements or organic compounds... | |
| ISO 16730:2008 provides a framework for assessment, verification and validation of all types of calculation methods used as tools for fire safety engineering. It does not address specific fire models,... | |
| ISO 16732-1:2012 provides the conceptual basis for fire risk assessment by stating the principles underlying the quantification and interpretation of fire-related risk. These fire risk principles apply to all fire-related... | |
| ISO 16734:2006 govern the application of explicit algebraic equation sets to the calculation of specific characteristics of fire plumes. ISO 16734:2006 is an implementation of the general requirements provided in... | |
| ISO 16739:2013 specifies a conceptual data schema and an exchange file format for Building Information Model (BIM) data. The conceptual schema is defined in EXPRESS data specification language. The standard... | |
| ISO 16740:2005 specifies a method for the determination of the time-weighted average mass concentration of hexavalent chromium in workplace air. Separate sample preparation methods are specified for the extraction of... | |
| ISO 16750-1:2006 applies to electric and electronic systems/components for vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the vehicle. | |
| ISO 16750-2:2012 applies to electric and electronic systems/components for road vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the... | |
| ISO 16750-3:2012 applies to electric and electronic systems/components for road vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the... | |
| ISO 16750-4:2010 applies to electrical and electronic systems/components for road vehicles. ISO 16750-4:2010 describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in... | |
| ISO 16750-5:2010 applies to electrical and electronic systems/components for road vehicles. ISO 16750-5:2010 describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in... | |
| ISO 16754:2008 specifies a uniform method for calculating the average ground contact pressure of self-propelled and towed crawler (track-laying) earth-moving machines, as defined in ISO 6165, on soft surfaces with... | |
| ISO 16770:2004 specifies a method of determining the stress cracking resistance of polyethylene materials in any environment. The test is carried out on notched test specimens cut from compression-moulded sheet... | |
| ISO 16772:2004 specifies a method for the determination of mercury in an aqua regia extract of soil, obtained in accordance with ISO 11464 and ISO 11466, using cold-vapour atomic absorption... | |
| ISO 16773-1:2007 gives terms and definitions for electrochemical impedance spectroscopy (EIS) for use in the other parts of ISO 16773. | |
| ISO 16773-2:2007 provides guidance on optimizing the collection of EIS data from high-impedance systems. High impedance in the context of intact coatings refers to systems with an impedance greater than... | |
| ISO 16773-3:2009 specifies a procedure for the evaluation of the experimental set-up used for carrying out EIS on high-impedance coated samples. For this purpose, dummy cells are used to simulate... | |
| ISO 16773-4:2009 gives some typical examples of impedance spectra of high-impedance coated metal samples. Some guidance on interpretation of such spectra is also given. | |
| ISO 16784-1:2006 applies to corrosion and fouling in industrial cooling water systems. ISO 16784-1:2006 covers the criteria that must be defined and implemented in a pilot-scale testing programme to select... | |
| ISO 16784-2:2006 applies to corrosion and fouling in industrial cooling water systems ISO 16784-2:2006 describes a method for preliminary evaluation of the performance of treatment programmes for open recirculating cooling... | |
| ISO 16790:2005 specifies a method for determining the drawing and break characteristics of molten plastics. The method involves the measurement of the force generated in deforming a molten filament under... | |
| ISO 16792:2006 specifies requirements for the preparation, revision and presentation of digital product definition data (data sets). It supports two methods of application: model-only, and model and drawing in digital... | |
| ISO 16793:2005 describes the ceramographic preparation of uranium dioxide (UO2) sintered pellets for qualitative and quantitative microstructure examinations. | |
| ISO 16794: 2003 specifies a test method for the determination of hydrocarbons, chlorocarbons and partially or completely substituted halocarbons or halohydrocarbons contained as impurities in uranium hexafluoride (UF6)... | |
| ISO 16795:2004 covers the determination of Gd2O3 in sintered fuel pellets, by X-ray fluorescence spectrometry using the Gd L-alpha line. The fuel pellets are polished before X-ray... | |
| ISO 16796:2004 is applicable to the determination of Gd2O3 in powder blends and sintered pellets of Gd2O3 + UO2 from 1 % to... | |
| ISO 16797:2004 describes the Soxhlet-mode parameter test to assess the chemical durability of materials by measuring the initial dissolution rate in pure water. The measurement is performed at the boiling... | |
| ISO 16798:2004 specifies requirements for forged or welded steel master links, intermediate master links, master link assemblies and lower terminal links of Grade 8 up to 132 t WLL (working... | |
| ISO 16805:2003 specifies the procedure to be used for sample preparation for the determination of the glass transition temperature of binders for paints and varnishes, including coating powders, by differential... | |
| ISO 16809:2012 specifies the principles for ultrasonic thickness measurement of metallic and non-metallic materials by direct contact, based on measurement of time-of-flight of ultrasonic pulses only. | |
| ISO 16810:2012 defines the general principles required for the ultrasonic examination of industrial products that permit the transmission of ultrasound. The specific conditions of application and use of ultrasonic examination,... | |
| ISO 16811:2012 specifies the general rules for setting the timebase range and sensitivity (i.e. gain adjustment) of a manually operated ultrasonic flaw detector with A-scan display in order that reproducible... | |
| ISO 16812:2007 specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural... | |
| ISO 16814:2008 is intended to specify methods to express the quality of indoor air suitable for human occupancy, to allow several acceptable target levels of indoor air quality, depending on... | |
| ISO 16817:2012 provides an integrated design process for a high-quality indoor visual environment including architectural and engineering aspects of daylighting and artificial lighting for user satisfaction, well-being and productivity as... | |
| ISO 16818:2008 gives terms and definitions for use in the design of energy efficient buildings. ISO 16818:2007 is applicable to new buildings and retrofitted existing buildings. | |
| ISO 16820:2004 describes a procedure for statistically analysing data from forced-choice sensory discrimination tests, such as the Triangle, Duo-Trio, 3-AFC, 2-AFC, in which after every trial of the discrimination test... | |
| ISO 16823:2012 specifies the principles of transmission techniques. Transmission techniques can be used for: a) detection of imperfections; b) determination of attenuation. The general principles required for the use of... | |
| ISO 16826:2012 defines the principles for tandem‑ and longitudinal-longitu dinal-transverse (LLT) wave‑examination for the detection of discontinuities perpendicular to the surface. The general principles required for the ultrasonic examination of... | |
| ISO 16827:2012 specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria. It is applicable,... | |
| ISO 16828:2012 defines the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low alloyed carbon steel components. It can... | |
| ISO 16831:2012 specifies methods and acceptance criteria for assessing the performance of instruments for measuring thickness using pulse-echo ultrasound. ISO 16831:2012 covers both direct (digital) reading and waveform display types... | |
| ISO 16832:2006 specifies basic methods for scaling loudness into categories for audiological applications. | |
| ISO 16833:2006 defines criteria that characterise geometrical uniformity of wheels, and describes principles of measurements of these criteria. | |
| ISO 16834:2012 specifies requirements for classification of wire electrodes, wires, rods and all-weld metal deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas shielded metal... | |
| ISO 16839:2013 specifies a method for determining, by test and calculation, the resistance against lateral deformation of steel wire ropes without axial load. It provides a system of testing in... | |
| ISO 1683:2008 specifies reference values used in acoustics, in order to establish a uniform basis for the expression of acoustical and vibratory levels. The reference values are mandatory for use... | |
| ISO 16840-1:2006 applies to seating intended to provide postural support within a wheelchair. It specifies: a global coordinate system that permits the determination and recording of a person's posture while... | |
| ISO 16840-2:2007 specifies apparatus, test methods and disclosure requirements for wheelchair seat cushions intended to maintain tissue integrity and prevent tissue trauma. It does not include test methods or requirements... | |
| ISO 16840-3:2006 specifies test methods for the determination of static, impact and repetitive load strengths as well as disclosure requirements for postural support devices (PSD) with associated attachment hardware intended... | |
| ISO 16840-4:2009 specifies test methods and requirements for design and performance, for instructions and warnings and for product marking and labelling of seating systems intended to be used as a... | |
| ISO 16844-1:2013 gives the dimensions and tests and requirements for the performance of electrical connectors needed for ensuring the interchangeability of different components of the tachograph systems used for road... | |
| ISO 16844-2:2011 specifies the electrical connection between the recording unit, and the vehicle network and the motion sensor, in tachograph systems used in road vehicles. | |
| ISO 16844-3:2004 specifies the physical and data link layers of the electrical interface connecting a motion sensor to a vehicle unit, used in tachograph systems in road vehicles to perform... | |
| ISO 16844-4:2004 specifies the CAN (controller area network) interface for the interchange -- performed in accordance ISO 16844-6 -- of digital information between a road vehicle's tachograph system and vehicle... | |
| ISO 16844-5:2004 specifies the secured interchange of digital information between a road vehicle's tachograph system and vehicle units, and within the tachograph system itself. This type of interchange will be... | |
| ISO 16844-6:2004 specifies diagnostic communication and services in tachograph systems used in road vehicles, for both the CAN and K-line communication modes. It is also applicable for programming purposes. | |
| ISO 16844-7:2004 specifies the parameters used in the interchange of digital information between a road vehicle's tachograph system and vehicle units or a diagnostic tester, or within the tachograph system... | |
| ISO 16845:2004 provides the methodology and abstract test suite necessary for checking the conformance of any CAN implementation of the CAN specified in ISO 11898-1. | |
| ISO 16850:2007 specifies a test method to simulate the child head impact of a child pedestrian to the bonnet top of passengers vehicles or some light truck vehicles, as defined... | |
| ISO 16851:2012 specifies a method for determining the net length of an endless (spliced) conveyor belt. It applies to all types of construction of conveyor belting with the exception of... | |
| ISO 16852:2008 specifies the requirements for flame arresters that prevent flame transmission when explosive gas-air or vapour-air mixtures are present. It establishes uniform principles for the classification, basic construction and... | |
| ISO 16853:2010 specifies the main dimensions, with tolerances, of rectangular sliver cans used in the textile industry. It also gives information about the right-angle position of cans according to ISO... | |
| ISO 16854:2004 establishes a vocabulary of terms for ring twisting textile machinery. | |
| ISO 16860:2005 provides a standard method for determining the operating characteristics of a differential pressure or bypass valve condition-signalling device used as an accessory to a hydraulic fluid power filter. | |
| ISO 16862:2003 describes test methods for evaluating the sag resistance (resistance to sagging) of paints, varnishes and similar coating materials (coatings) when applied to a substrate and held in a... | |
| ISO 16869:2008 specifies a method for determining the effectiveness of fungistatic compounds in protecting susceptible ingredients like plasticizers, stabilizers, etc., in plastics formulations. The method demonstrates whether or not a... | |
| ISO 16871:2003 specifies a method for exposing plastics pipes and fittings, individually or assembled, or as pieces therefrom, to natural weathering in order to assess changes. The exposure is considered... | |
| ISO 16872:2008 specifies the requirements for Grade VH, fine‑tolerance hoist chains, for use as load chains in manually operated chain hoists. It is applicable to these round steel short link... | |
| ISO 16874:2004 provides identification coding for manifolds used in hydraulic systems and for component installation features (for example, mounting surfaces or cavities) of such manifolds. It specifies identification codes to... | |
| ISO 16875:2004 establishes a vocabulary of terms for ring spinning textile machines using the cotton spinning method. It also gives an example of the design of such machines. | |
| ISO 16877:2008 specifies the requirements for fine-tolerance Grade TH hoist chains, for use as load chains in manually operated chain hoists. It is applicable to these round steel short link... | |
| ISO 16881-1:2005 gives the requirements for the selection of the size for iron or steel wheels and presents the formulae for the local stresses in crane structures due to the... | |
| ISO 16883:2007 specifies the design type test requirements for large packagings intended for use in the transport of dangerous goods. | |
| ISO 16889:2008 describes a multi-pass filtration performance test with continuous contaminant injection for hydraulic fluid power filter elements; a procedure for determining the contaminant capacity, particulate removal and differential pressure... | |
| ISO 16893-1:2008 specifies a classification matrix and the related mandatory tests and thickness ranges to be applied to particleboard for general purposes, furniture, load-bearing applications, and heavy-duty load-bearing applications. | |
| ISO 16893-2:2010 provides the manufacturing property requirements for uncoated particleboard. | |
| ISO 16894:2009 gives definitions, classifications and specifications for the manufacturing requirements of oriented strand board (OSB). The values given are used to classify OSB into one of four types, namely... | |
| ISO 16895-1:2008 specifies a classification matrix, related mandatory tests and thickness ranges for ultra-low-, low-, medium-, and high-density dry process fibreboard. | |
| ISO 16895-2:2010 provides the manufacturing property requirements for uncoated dry-process fibreboard. | |
| ISO 16900-2:2009 specifies the method(s) of test for breathing resistance for: complete respiratory protective devices; filters for respiratory protective devices; respiratory interfaces. | |
| ISO 16900-3:2012 specifies the test methods for particle filter penetration of separate or integral filters for respiratory protective devices. | |
| ISO 16900-4:2011 specifies the test method for determining gas capacity of separate or integral gas and combined filters for respiratory protective systems. ISO 16900-4:2011 includes the validation test at specified... | |
| ISO 16902-1:2003 establishes a test code based on ISO 9614-1 and ISO 9614-2 for determining the sound power levels of a hydraulic fluid power pump under controlled conditions of installation... | |
| ISO 16911-1:2013 specifies a method for periodic determination of the axial velocity and volume flow rate of gas within emissions ducts and stacks. It is applicable for use in circular... | |
| ISO 16911-2:2013 describes specific requirements for automated measuring system (AMS) flow monitoring. It is partly derived from EN 14181 which is the general document on the quality assurance of AMSs... | |
| ISO 16915:2003 specifies the main dimensions and tolerances, in millimetres, of sprue pullers, which are used mainly in injection moulds for plastics and rubbers. It also specifies the material, hardness... | |
| ISO 16916:2004 defines the description and specification of injection moulds to be used when requesting tools (stage of tender) and ordering tools. This International Standard gives data for material acquisition,... | |
| ISO 16918-1:2009 specifies a method for analysing steel and iron for the trace element determinations of Sn, Sb, Ce, Pb and Bi using inductively coupled plasma mass spectrometry (ICP-MS). The... | |
| ISO 16929:2013 is used to determine the degree of disintegration of plastic materials in a pilot-scale aerobic composting test under defined conditions. It forms part of an overall scheme for... | |
| ISO 16931:2009 specifies a method using high-performance size-exclusion chromatography (HPSEC) to determine the contents, as mass fractions, of polymerized triacylglycerols (PTAGs) in oils and fats which contain at least 3... | |
| ISO 16932:2007 determines resistance of security glazing products to natural threats characterized by simulated destructive-windstor m events. Classification is intended as basis for judging the ability of glazing to remain... | |
| ISO 16933:2006 provides a structured procedure to determine the air-blast resistance of glazing and sets forth the required apparatus, procedures, specimens, other requirements and guidelines for conducting arena air-blast tests... | |
| ISO 16934:2007 specifies a shock tube test method and classification requirements for explosion-pressure-r esistant glazing, including glazing fabricated from glass, plastic, glass-clad plastics, laminated glass, glass/plastic glazing materials, and film-backed... | |
| ISO 16935:2006 sets forth test procedures to evaluate resistance of security glazing materials and products against ballistic impact with classification by weapon and ammunition. ISO 16935:2006 is applicable to attack... | |
| ISO 16936-1:2005 specifies requirements and a test method for security glazing designed to resist impacts of a hard body by delaying access of objects and/or persons to a protected space... | |
| ISO 16936-2:2005 specifies requirements and a mechanical test method for security glazing designed to resist actions of manual attack by delaying access of objects and/or persons to a protected space... | |
| ISO 16936-3:2005 sets forth a physical test method for security glazing designed to resist actions of manual attack by delaying access of objects and/or persons to a protected space for... | |
| ISO 16936-4:2005 specifies requirements and mechanical test methods for security glazing designed to resist actions of manual attack by delaying access of objects and/or persons to a protected space for... | |
| ISO 16938-1:2008 specifies a method for determining the staining of porous substrates (e.g. marble, limestone, sandstone or granite) by sealants used in building construction. The method evaluates the likelihood of... | |
| ISO 16938-2:2008 specifies a method for determining the staining of porous substrates (e.g. marble, limestone, sandstone, or granite) by sealants used in building construction. The method evaluates the likelihood of... | |
| ISO 16940:2008 describes a method for the measurement of the loss factor and the equivalent bending rigidity modulus of laminated glass test pieces. The aim is to compare the properties... | |
| ISO 16962:2005 specifies a glow discharge optical emission spectrometric method for the determination of the thickness, mass per unit area and chemical composition of metallic surface coatings consisting of zinc-... | |
| ISO 16972:2010 is applicable to respiratory protective devices. It defines commonly used terms and specifies units of measurement to achieve a uniform interpretation and to prevent ambiguous use. It indicates... | |
| ISO 16978:2003 specifies a method for determining the apparent modulus of elasticity and bending strength of wood-based panels in flatwise bending. | |
| ISO 16979:2003 specifies a method for determining the moisture content of wood-based panels. | |
| ISO 16981:2003 specifies a method for assessing the surface soundness of coated wood-based panels and uncoated particle-boards, wet- and dry-process fibreboards and cement-bonded particle-boards. | |
| ISO 16983:2003 specifies a method for determining the swelling in thickness of flat-pressed or drum-pressed particle boards, fibre boards, OSB, and cement-bonded particle boards, after immersion in water. | |
| ISO 16984:2003 specifies a method for determining the resistance to tension perpendicular to the plane of the panel, also known as "internal bond", of particle boards, OSB, fibre boards, and... | |
| ISO 16985:2003 specifies a method for the determination of dimensional changes in wood-based panels, due to variations in relative humidity. | |
| ISO 16987:2003 specifies a test method for the determination of the moisture resistance of wood-based panels under cyclic test conditions. | |
| ISO 16992:2010 describes spare unit substitutive equipment (SUSE) for passenger car tyres, which is designed to enable users to continue their journey (with or without a stop) in a reasonably... | |
| ISO 16998:2003 specifies a method of test for evaluating the bond quality of particleboards, OSB and fibreboards, intended for use in humid conditions. | |
| ISO 16999:2003 specifies certain rules for the sampling and cutting of test pieces. ISO 16999:2003 does not cover the sampling and cutting of test pieces for the derivation of characteristic... | |
| ISO 1701-1:2004 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, horizontal-spindle milling machines with table of variable height. It also specifies the... | |
| ISO 1701-2:2004 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, vertical-spindle milling machines with table of variable height. It also specifies the... | |
| ISO 1703:2005 gives a nomenclature in English and French of assembly tools for screws and nuts. | |
| ISO 1704:2008 specifies the shape, proportions, dimensions and tolerances of the component parts of stud-link anchor chains. Any statutory requirements, rules and regulations applicable to the individual ship concerned also... | |
| ISO 17052:2007 specifies a method for the determination of residual monomers and other volatile low-molecular-mass compounds in raw rubber by capillary column gas chromatography using a thermal desorption (also known... | |
| ISO 17053:2005 specifies an infrared method after fusion under inert gas for the determination of oxygen in steel and iron. The method is applicable to mass fractions of oxygen between... | |
| ISO 17054:2010 specifies a procedure on how to improve the performance of a routine X-ray fluorescence spectrometry (XRF) method, already in use for analysis of high alloy steels, by using... | |
| ISO 17058:2004 specifies a method for the determination of the arsenic content in steel and iron using a spectrophotometric method after distillation. The method is applicable to an arsenic content... | |
| ISO 17059:2007 specifies a rapid method for extraction of oil and for preparation of the methyl esters of fatty acids. The methyl esters thus obtained can be used for gas... | |
| ISO 17063:2003 specifies minimum performance criteria and tests for braking systems, enabling a uniform assessment of the braking capability of pedestrian-controlle d, self-propelled earth-moving machinery (as specified in ISO 6165)... | |
| ISO 17064:2004 provides definitions and terminology applying to all types of fibreboard, particleboard and oriented strand board (OSB). | |
| ISO 17066-2:2007 provides a vocabulary for the various types of hydraulic tools, fixed and portable and for the attachments that are used with them. The terms are given by category:... | |
| ISO 17070:2006 specifies a method for determining the content of pentachlorophenol (PCP), its salts and esters in leather. | |
| ISO 17071:2006 specifies two alternative methods for determining the fogging characteristics of leathers used in the passenger compartments of motor vehicles, namely Method A and Method B. These are two... | |
| ISO 17072-1:2011 specifies a method for the determination of extractable metals in leather using extraction with an acid artificial-perspirat ion solution and subsequent determination with inductively coupled plasma/optical emission spectrometry... | |
| ISO 17072-2:2011 specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP/OES),... | |
| ISO 17074:2006 specifies a method for determining the horizontal burning rate of leather. It is applicable to all light leathers but is particularly intended for leathers used in the passenger... | |
| ISO 17075:2007 specifies a method for determining chromium(VI) in solutions leached from leather under defined conditions. The method described is suitable to quantify the chromium(VI) content in leathers down to... | |
| ISO 17076-1:2012 specifies a method of determining the abrasion resistance of leather using a Taber apparatus. | |
| ISO 17076-2:2011 specifies a method of determining the abrasion resistance of upholstery leather for different applications using Martindale apparatus with a ball plate. The method is applicable to semi-aniline, pigmented... | |
| ISO 17078:2004 provides requirements for side-pocket mandrels used in the petroleum and natural gas industry. This part of ISO 17078 includes specifying, selecting, designing, manufacturing, quality control, testing, and preparation... | |
| ISO/TC 131 Fluid power systems | |
| ISO/TC 21 Equipment for fire protection and fire fighting | |
| ISO/TC 38 Textiles | |
| ISO/TC 45 Rubber and rubber products | |
| ISO16431:2012 defines methods to measure the cleanliness of a fluid in an assembled hydraulic fluid power system, to verify a required system cleanliness upon release of the system from the... | |
| ISO16433:2006 specifies requirements for resistance seam welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel comprising two sheets of metal, where the maximum single sheet... | |
| ISO16532-2:2007 specifies a method for the determination of grease resistance of paper and board. Primarily, it is intended to establish an approximate level of grease resistance, by testing the degree... | |
| ISO16813:2006 establishes the general principles of building environment design taking into account healthy indoor environment for the occupants, and protecting the environment for future generations. ISO16813:2006 promotes an approach in... | |
| Methods for the calibration of vibration and shock transducers -- Part 11: Primary vibration calibration by laser interferometry | |
| Methods for the calibration of vibration and shock transducers -- Part 13: Primary shock calibration using laser interferometry | |
| Methods for the calibration of vibration and shock transducers -- Part 1: Basic concepts | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the detection of Escherichia coli O157 | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli -- Part 1: Colony-count technique at 44 degrees C using membranes and... | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli -- Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-i ndolyl... | |
| Monolithic refractory products -- Determination of resistance to explosive spalling | |
| Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly(vinyl chloride) resins | |
| Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials | |
| Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers | |
| Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers | |
| Plastics -- Liquid resins -- Determination of density by the pyknometer method | |
| Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | |
| Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water | |
| Pneumatic fluid power -- Connections -- Ports and stud ends | |
| Pulps -- Determination of fibre length by automated optical analysis -- Part 1: Polarized light method | |
| Road traffic lights -- Photometric properties of 200 mm roundel signals | |
| Road vehicles -- Engine families for certification of heavy-duty vehicles by Exhaust emission | |
| Rubber condoms for clinical trials -- Measurement of physical properties | |
| Ships and marine technology - Lifesaving and fire protection -- Atmospheric oil mist detectors for ships | |
| Ships and marine technology -- Gyro-compasses for high-speed craft | |
| Ships and marine technology -- Protective coatings and inspection method -- Part 1: Dedicated sea water ballast tanks | |
| Ships and marine technology -- Protective coatings and inspection method -- Part 2: Void spaces of bulk carriers and oil tankers | |
| Ships and marine technology -- Protective coatings and inspection method -- Part 3: Cargo oil tanks of crude oil tankers | |
| Ships and marine technology -- Protective coatings and inspection method -- Part 4: Automated measuring method for the total amount of water-soluble salts | |
| Specifies a macro-method and a semi-micro method for the determination of the nitrogen content in raw natural rubber and in natural rubber latex using variants of the Kjeldahl process. Replaces... | |
| Specifies methods of test for natural and synthetic materials having a molar ratio sodium fluoride/aluminium trifluoride between 3 and 1,7 approximately. The method is applicable to products the phosphorus pentoxide... | |
| Specifies the determination for natural and synthetic materials having a molar ratio sodium fluoride/aluminium trifluoride between 3 and 1,7 approximately. The principle consists in fusion of a test portion with... | |
| Specifies the frequency for the note A in the treble stave and shall be 440 Hz. Tuning and retuning shall be effected by instruments producing it within an accuracy of... | |
| Specifies the general dimensions of tube drawing mandrels with respect to their diameter. applies to brazed drawing mandrels and sleeved drawing mandrels. The dimensions have been determined taking existing practice... | |
| Specifies the main dimensions for the certain number of tool types, and the codified designation of dies and the marking. Details not indicated are left to the discretion of the... | |
| Specifies the nominal outside diameters for inch-based thermoplastics pipes for the conveyance of fluids under pressure and non-pressure. It also specifies nominal pressure ratings and minimum required strengths for pipes... | |
| Specifies the nominal outside diameters for metric thermoplastics pipes for the conveyance of fluids under pressure and non-pressure. It also specifies nominal pressure ratings and minimum required strengths for pipes... | |
| Specifies the procedure for the preparation of crude samples and dried samples and of natural and synthetic materials having a molar ratio sodium fluoride/aluminium trifluoride between 3 and 1,7 approximately. | |
| Statistical interpretation of data -- Part 7: Median -- Estimation and confidence intervals | |
| Surface chemical analysis -- X-ray photoelectron spectroscopy -- Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer | |
| TC 106 Dentistry // SC 7 | |
| TC 108 Mechanical vibration, shock and condition monitoring // SC 3 | |
| TC 160 Glass in building // SC 2 | |
| TC 172 Optics and photonics // SC 7 | |
| The aim of ISO 16354:2013 is to distinguish categories of knowledge libraries and to lay the foundation for uniform structures and content of such knowledge libraries and for commonality in... | |
| The considered method of measurement deals with vapours jet vacuum pumps, diffusions pumps and diffusion-ejector pumps. The dependence of the performance of these pumps on the backing pressure can only... | |
| The document specifies the formula for the calculation. In this ratio, only sodium oxide and potassium oxide combined in the form of silicates is considered. Replaces ISO Recommendation R 1689-1970. | |
| The measurements deal with diffusion pumps, ejector pumps, and booster pumps, i.e. pumps capable of operation in both the molecular and laminar flow regions. | |
| The method is applicable to products having vanadium contents between 0,0003 % (m/m) and 0,016 % (m/m), provided that the content of chromic oxide and titanic oxide does not exceed... | |
| The method is applicable to sodium contents equal to or greater than 0.05 % (m/m). The principle of the procedure consists in the fusion, at a controlled temperature, of a... | |
| The method specified are applicable directly to soluted mateials or materials soluble in boiling water. In case of solid chemicals not readily soluble in boiling water, a special preliminary treatment... | |
| The principle of the procedure based on titration of a test portion with a standard volumetric hydrochloric acid solution, in the presence of methyl orange as indikator. The alkalinity is... | |
| The procedure is based on evaporation to dryness of a test portion previously acidified with hydrochloric acid. Dissolution of the soluble salts, filtration and washing of the insoluble matter. Second... | |
| The purpose of ISO 16232-6:2007 is to determine the mass of particulate contamination by gravimetric analysis. Contaminants are separated from the extraction liquid by filtration. It applies to automotive components... | |
| The requirements given in ISO 16735:2006 govern the application of algebraic equation sets to the calculation of specific characteristics of smoke layers generated by fires. ISO 16735:2006 is an implementation... | |
| The requirements of ISO 16736:2006 govern the application of explicit algebraic equation sets to the calculation of specific characteristics of ceiling jet flows. ISO 16736:2006 is an implementation of the... | |
| The specified dimensions ensure interchangeability between bolted, clamped and rotable flanges under special conditions. The main dimensions are tabled; linear sealing loads, bores for vacuum flanges and required outside tube... | |
| Thermal insulating products for building applications -- Conditioning to moisture equilibrium under specified temperature and humidity conditions | |
| Thermal insulating products for building applications -- Determination of behaviour under cyclic loading | |
| Thermal insulating products for building applications -- Determination of compressive creep | |
| Thermal insulating products for building applications -- Determination of freeze-thaw resistance | |
| Thermal insulating products for building applications -- Determination of long-term water absorption by diffusion | |
| Thermal insulating products for building applications -- Determination of long-term water absorption by immersion | |
| Thermal insulating products for building applications -- Determination of shear behaviour | |
| This International Standard specifies a method for the determination of the following six water-soluble organic complexing agents in the concentration range from 0,5 micrograms/litre to 200 micrograms/litre: EDTA (ethylenedinitrilote traacetic... | |
| This International Standard specifies the minimum requirements for complete single-vision ready-to-wear near-vision spectacles. These spectacles are not intended for regular use without the approval of an eyecare professional. | |
| This International Standard specifies two methods, i.e. flow injection analysis (FIA) and continuous flow analysis (CFA), for the determination of soluble silicate ions in various types of water (such as... | |
| This part of ISO 16063 specifies the instrumentation and procedures to be used for primary calibration of accelerometers using the reciprocity method and the SI system of units. It is... | |
| This second edition cancels and replaces the first edition (1976). Specifies the principal dimensions of V-belts and the groove profiles of corresponding fixed or variable diameter pulleys. Is not applicable... | |
| This second edition cancels and replaces the first edition (ISO 1673:1978). Gives recommendations for the storage, with or without the use of artificial refrigeration, of onions of the species Allium... | |
| This second edition constitutes a technical revision of the first one. The methods described are applicable to profiled outlines and profiled surfaces and are related to the sub-clauses in ISO... | |
| Three cases, defined by a preliminary test, are envisaged: silicates containing neither sulphides nor chlorates; silicates containing sulphides; silicates containing chlorates. The method based on boiling of an acidified test... | |
| Water quality -- Guidance for determination of biodegradability in the marine environment | |
| Workplace air quality -- Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography -- Part 1: Pumped sampling method | |
| Workplace air quality -- Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography -- Part 2: Diffusive sampling method |
| << Prev | Next >> |