ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Scope This International Standard specifies the location, size, and density of single-size image marks and small, medium, and large image marks recorded on 16 mm and 35 mm microfilm for... | |
| 11979-8:2006 specifies fundamental requirements for all types of intraocular lenses intended for surgical implantation into the anterior segment of the human eye, excluding corneal implants and transplants. | |
| A semiquantitative method for the determination of the amount of free phenols in phenolic mouldings. Hot water extraction of free phenols from a powdered test portion, iodination of the water... | |
| Acoustics -- Measurement of the in situ sound attenuation of a removable screen | |
| Acoustics -- Measurement of the influence of road surfaces on traffic noise -- Part 1: Statistical Pass-By method | |
| Acoustics -- Procedures for the measurement of real-ear acoustical characteristics of hearing aids | |
| Aerospace -- Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 275 MPa... | |
| Aerospace -- Constant displacement hydraulic motors -- General specifications for 35 000 kPa systems | |
| Aerospace -- Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1 100 MPa (at ambient temperature) / 120 degrees C, 1 100 MPa (at ambient temperature) / 235 degrees... | |
| Aerospace -- Hydraulic, pressure-compensated , variable delivery pumps -- General requirement for 35 000 kPa systems | |
| Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa... | |
| Aerospace -- Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and... | |
| Aerospace -- Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature) / 235 degrees C, 1100 MPa (at ambient temperature) / 235 degrees C, 1250... | |
| Aerospace -- Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa... | |
| Aerospace -- Retainers, spring, sheet metal, for self-locking barrel nuts -- Dimensions | |
| Aerospace -- Rivets, solid, 100 degrees normal countersunk head, in metallic material, with or without surface treatment -- Dimensions | |
| Aerospace -- Rivets, solid, in nickel alloy -- Procurement specification | |
| Aerospace -- Rivets, solid, in titanium or titanium alloy -- Procurement specification | |
| Agricultural vehicles -- Mechanical hook-type connections on towing vehicles -- Test methods and requirements | |
| Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet | |
| Amends in the fourth column of the table (type 2 pigments) the heading as follows: Zinc tetrahydroxychromate pigments Type 2. | |
| Animal and vegetable fats and oils -- Determination of individual and total sterols contents -- Gas chromatographic method | |
| Applies to material defined in ISO 633 the moisture content of which is not higher than 14 % as determined in accordance with ISO 2386. Gross mass of bales is... | |
| Applies to measurements on silencers in practical applications for acoustic analysis, acceptance tests and similar evaluations. Depending on the method used, the measurement is either of insertion loss or transmission... | |
| Atmospheric icing of structures | |
| Background noise ubiquitously exists in analytical instruments whether or not a sample is applied to the instrument. ISO 11843-7:2012 is concerned with mathematical methodologies for estimating the minimum detectable value... | |
| Bolted bonnet steel globe valves for general-purpose applications | |
| Building construction -- Organization of information about construction works -- Part 2: Framework for classification of information | |
| Building environment design -- Design , dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 5: Installation | |
| Building environment design -- Design, dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 2: Determination of the design heating and cooling capacity | |
| Building environment design -- Design, dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 3: Design and dimensioning | |
| Capability of detection -- Part 1: Terms and definitions | |
| Capability of detection -- Part 2: Methodology in the linear calibration case | |
| Cinematography -- Manufacturer-printed , latent image identification on 16 mm, 35 mm and 65 mm motion-picture film -- Specifications and dimensions | |
| Cinematography -- Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film -- Specifications | |
| Cinematography -- Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints -- Specifications | |
| Commercial road vehicles -- Drawbar couplings and eyes for rigid drawbars -- Part 1: Strength tests for general cargo centre-axle trailers | |
| Components for containment enclosures -- Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units | |
| Components for containment enclosures -- Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators | |
| Components for containment enclosures -- Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums | |
| Components for containment enclosures -- Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices | |
| Components for containment enclosures -- Part 5: Penetrations for electrical and fluid circuits | |
| Computer applications in terminology -- Machine-readable terminology interchange format (MARTIF) -- Negotiated interchange | |
| Contains figures to illustrate the meaning of the definitions. It does not apply to engines used to propel aircraft, automobiles and trucks, agricultural and indutrial types of tractors, road construction... | |
| Contains the most important general guidelines for carrying out corrosion test under conditions of constant immersion. Does not cover procedures for stress corrosion testing. | |
| Corkwood in planks -- Grading, classification and packing | |
| Corrosion of metals and alloys -- Exfoliation corrosion testing of aluminium alloys | |
| Corrosion-resistant cast steels for general applications | |
| Cranes -- Anchoring devices for in-service and out-of-service conditions -- Part 1: General | |
| Cranes -- Anchoring devices for in-service and out-of-service conditions -- Part 4: Jib cranes | |
| Cranes -- Availability -- Vocabulary | |
| Cranes -- Maintenance manual -- Part 1: General | |
| Cranes -- Safe use -- Part 1: General | |
| Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 1: General | |
| Defines 205 terms commonly employed in this field. Alternative names are given for several terms: in some cases, however, the use of the alternative name is deprecated (as indicated). | |
| Defines different types of plain bearing samples such as are exchanged between purchaser and manufacturer: samples used for tests and examinations which are carried out in the experimental stage and... | |
| Defines terms and parameters used for determining surface texture by the motif method. It also describes the corresponding ideal operator and measuring conditions. | |
| Defines the permissible limits of the sharpness of edges and corners, so reduce the risk of injury to the operator or maintenance personnel while operating earth-moving machinery and performing maintenance. | |
| Defines, in English, 420 terms commonly employed in coal preparation under the following headlines: general terms, sizing, cleaning, separation of solids from water or air, size reduction, expression of results,... | |
| Describes a flame atomic absorption spectrometric method and a graphite furnace atomic absorption spectrometric method for the determination of aluminium in water. The flame AAS method is applicable to mass... | |
| Describes a laboratory method and in situ methods for the determination of the sound insulation performance of sound-protecting cabins. Applicable to sound-protecting cabins with a leak ratio smaller than 2... | |
| Describes a method for assessing the pipe wall homogeneity of structured-wall thermoplastics by inspection of the effects of heating in an oven. | |
| Describes a method for the determination of suspended solids in raw waters and waste waters by filtration though glass-fibre filters. The lower limit of the determination is approximately 2 mg/l. | |
| Describes a method for the measurement of the stem content of strips of leaf tobacco. The procedure consists of taking of a sample of tobacco strips and testing by means... | |
| Describes a method to evaluate the contents of free alcohols and total alcohols in essential oils by determination of ester values before and after acetylation by acetic anhydride in the... | |
| Describes a procedure for the measurement of inherent stability under accelerated oxidizing conditions. The method provides a basis for the estimation of the storage stability, under the conditions of this... | |
| Describes a test method using a small-scale laboratory apparatus for the determination of the corrosive effects of combustion products liberated by burning plastics. Makes it possible to produce a ranking... | |
| Describes domestic laundering procedures for repeated washing at selected wash temperatures prior to assessing flammability behaviour of textiles. The washing machines and procedures specified are based on ISO 6330. | |
| Describes general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products. | |
| Earth-moving machinery -- Hour meters | |
| Earth-moving machinery -- Tip-over protection structure (TOPS) for compact excavators -- Laboratory tests and performance requirements | |
| Electrically propelled road vehicles -- Test specification for lithium-ion traction battery packs and systems -- Part 2: High-energy applications | |
| Electronic still-picture imaging -- Removable memory -- Part 1: Basic removable-memory model | |
| Electronic still-picture imaging -- Removable memory -- Part 2: TIFF/EP image data format | |
| Essential oils -- Determination of acid value | |
| Establishes the requirements for this product. Describes sampling, methods of test, packing and marking. Annex A covers the determination of loss in mass at 103 degrees centigrade, Annex B the... | |
| Establishes uniform test methods and requirements for airbag modules in road vehicles. | |
| Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of cure characteristics | |
| Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of flowability, maturation and shelf life | |
| Flux cored solder wire -- Specification and test methods -- Part 2: Determination of flux content | |
| Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 1: Yoke type connections | |
| Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 2: Threaded connections | |
| Gas cylinders -- Outlet connections for gas cylinder valves for compressed breathable air -- Part 3: Adaptor for 230 bar valves | |
| Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments | |
| Gives a guidance on conditions for the cold storage of apples (Malus communis L.). Cancels and replaces the first edition, which has been technically revised. | |
| Gives a method for determining the absorption capacity of the absorbent core of body-worn urine-absorbing aids. | |
| Gives a method for the determination, using an oscillation U-tube densitometer, of the density of crude petroleum and related products within the range 600 kg/m^3 to 1 100 kg/m^3 which... | |
| Gives the dimensions of pan head screws with internal offset cruciform ribbed or unribbed drive, pitch diameter shank and long length MJ threads, in metallic material, coated or uncoated, with... | |
| Gives the dimensions of pan head screws with internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, in metallic material, coated or uncoated, with... | |
| Gives the functional, performance and safety requirements for self-propelled passenger boarding stairs intended for access to the cabin of all aircraft types commonly in service in international civil air transport... | |
| Gives the values shown in the figures 1 to 3. These values are listed in tables. All values are relacted to landing lamps 28 V, 600 W; 28 V, 600/400... | |
| Graphic technology -- Prints and printing inks -- Assessment of light fastness using filtered xenon arc light | |
| Graphic technology -- Process control -- Offset platemaking | |
| Guidance and methods for activity measurements of materials to be released for recycling, re-use or disposal as non-radioactive waste arising from the operation of nuclear facilities. | |
| Heat-resistant cast steels and alloys for general applications | |
| Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions | |
| Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions | |
| Hot formed helical compression springs -- Technical specifications | |
| Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation | |
| Hygrothermal performance of building materials and products -- Determination of moisture content by drying at elevated temperature | |
| Hygrothermal performance of building materials and products -- Determination of water vapour transmission properties | |
| Industrial fans -- Mechanical safety of fans -- Guarding | |
| Information and documentation -- Transliteration of Thai | |
| International Standard ISO 12135 specifies methods for determining fracture toughness in terms of K, δ, J and R-curves for homogeneous metallic materials subjected to quasistatic loading. Specimens are... | |
| ISO 11813|IDF 156:2010 specifies a flame atomic absorption spectrometric method for the determination of the zinc content of milk and milk products. The method has been validated for zinc contents... | |
| ISO 11814|IDF 162:2002 specifies a high-performance liquid chromatographic (HPLC) method for an assessment of the heat treatment intensity to be applied during the processing of milk powder, in order to... | |
| ISO 11815|IDF 157:2007 describes a method for the determination of the total milk-clotting activity of bovine rennet containing only chymosin and bovine pepsin as the active coagulating enzymes on a... | |
| ISO 11816-1|IDF 155-1:2006 specifies a fluorimetric method for the determination of alkaline phosphatase (ALP, EC 3.1.3.1) activity in pasteurised whole milk, semi-skimmed milk, skimmed milk and flavoured milks. The method... | |
| ISO 11816-2|IDF 155-2:2003 specifies a fluorometric method for the determination of alkaline phosphatase activity in cheese. This method is also applicable to soft cheeses and semi-hard cheeses for distinguishing raw... | |
| ISO 1182:2010 specifies a method of test for determining the non-combustibility performance, under specified conditions, of homogeneous products and substantial components of non-homogeneous products. | |
| ISO 1183-2:2004 specifies a gradient column method for the determination of the density of non-cellular moulded or extruded plastics in void-free form. Density gradient columns are columns containing a mixture... | |
| ISO 11833-1:2012 specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC‑U) and the test methods to be used to measure the required values. It... | |
| ISO 11837:2011 specifies performance requirements and a corresponding test method for saw chain shot guarding systems on the harvester heads and grip saws of forestry machines. It is applicable only... | |
| ISO 11839:2010 specifies test procedures and performance requirements for determining the protective ability of panel materials used in forestry-machinery operator enclosures intended to protect the operator against sawteeth thrown by... | |
| ISO 11843-3:2003 gives a method of estimating the critical value of the response variable from the mean and standard deviation of repeated measurements of the reference state in certain situations... | |
| ISO 11843-4:2003 deals with the assessment of the capability of detection of a measurement method without the assumptions in ISO 11843-2 of a linear calibration curve and certain relationships between... | |
| ISO 11843-5:2008 is concerned with calibration functions that are either linear or non-linear. It specifies basic methods to construct a precision profile for the response variable, namely a description of... | |
| ISO 11843-6:2013 presents methods for determining the critical value of the response variable and the minimum detectable value in Poisson distribution measurements. It is applicable when variations in both the... | |
| ISO 11844-2:2005 specifies methods for determination of corrosion rate with standard specimens of metals in indoor atmospheres with low corrosivity. For this direct method of evaluation of corrosivity, different sensitive... | |
| ISO 11844-3:2006 describes methods for measuring the environmental parameters used to classify the corrosivity of indoor atmospheres on metals and alloys. | |
| ISO 11850:2011 specifies general safety requirements for self-propelled forestry machines and machines configured as forestry machines. It deals with all significant hazards, hazardous situations and events common to fellers, bunchers,... | |
| ISO 11855-1:2012 specifies the basic definitions, symbols, and a comfort criteria for radiant heating and cooling systems. ISO 11855-1:2012 is applicable to water based embedded surface heating and cooling systems... | |
| ISO 11855-4:2012 allows the calculation of peak cooling capacity of Thermo Active Building Systems (TABS), based on heat gains, such as solar gains, internal heat gains, and ventilation, and the... | |
| ISO 11855-6:2012 establishes guidelines on the control of embedded radiant heating and cooling systems. It specifies uniform requirements for the design and construction of heating and cooling floors, ceiling and... | |
| ISO 1185:2003 specifies the dimensions of, and gives particular requirements for, 7-pole connectors of type 24 N and their contact allocation for the electrical connection between towing and towed vehicles... | |
| ISO 11863:2011 specifies how to determine functional performance requirements (demand) for buildings and building-related facilities, and how to check the capability of buildings and facilities to meet identified requirements (supply). | |
| ISO 11865|IDF 174:2009 specifies a method for the determination of the white flecks number (WFN) in instant whole milk powder. | |
| ISO 11866-1|IDF 170-1:2005 specifies a combined method for the enumeration of presumptive Escherichia coli and of presumptive coliforms by means of a culture technique involving a liquid medium with MUG,... | |
| ISO 11866-2|IDF 170-2:2005 specifies a method for the enumeration of presumptive Escherichia coli by means of a colony-count technique at 44 °C. The method is applicable to milk, liquid milk... | |
| ISO 11868|IDF 147:2007 specifies a method for the determination of the lactulose content of heated milk, skimmed, partially skimmed or whole milk, by high-performance liquid chromatography, in order to distinguish... | |
| ISO 11870|IDF 152:2009 gives guidance on: a) existing standardized methods (both reference and butyrometric) for the determination of fat in various milk products; b) the principles underlying any acid-butyrometric analysis... | |
| ISO 11873:2005 specifies the method to be used for the determination of sulfur and carbon in cobalt metal powders in the range of 0,001 % (m/m) to 0,1 % (m/m)... | |
| ISO 11876:2010 specifies a flame atomic absorption spectrometric method to be used for the determination of the mass fractions of copper, potassium, magnesium, manganese, sodium and zinc in cobalt metal... | |
| ISO 11877:2008 specifies a photometric method to be used for the determination of the mass fraction of silicon in the range of 20 µg/g to 300 µg/g in cobalt metal... | |
| ISO 11884-1:2006 specifies minimum requirements for stereomicroscopes used mainly for visual observation for general use. | |
| ISO 11884-2:2007 specifies minimum requirements for high performance stereomicroscopes. It is not applicable to operation microscopes. | |
| ISO 11885:2007 specifies a method for the determination of dissolved elements, elements bound to particles ("particulate") and total content of elements in different types of water (e.g. ground, surface, raw,... | |
| ISO 11886:2002 specifies terms and definitions of the main types of mechanical equipment for pile driving/extracting, such as pile arrangements on the construction site, pulling, installation of piles at the... | |
| ISO 11890-1:2007 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products. It specifies a method for the determination of the... | |
| ISO 11890-2:2013 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products. It specifies a method for the determination of the... | |
| ISO 11893:2011 defines the project organization principles and requirements needed to provide satisfactory and coherent management of space projects. The general requirements for project organization are given in ISO 14300-1. | |
| ISO 11894-1:2013 describes a test method for the determination of ionic conductivity of oxide-ion-conducting solid electrolytes by the 4-terminal method with alternating current (AC 4-terminal method). ISO 11894-1:2013 applies to... | |
| ISO 11898-1:2003 specifies the data link layer (DLL) and physical signalling of the controller area network (CAN): a serial communication protocol that supports distributed real-time control and multiplexing for use... | |
| ISO 11898-2:2003 specifies the high-speed (transmission rates of up to 1 Mbit/s) medium access unit (MAU), and some medium dependent interface (MDI) features (according to ISO 8802-3), which comprise the... | |
| ISO 11898-3:2006 specifies characteristics of setting up an interchange of digital information between electronic control units of road vehicles equipped with the controller area network (CAN) at transmission rates above... | |
| ISO 11898-4:2004 specifies time-triggered communication in the controller area network (CAN): a serial communication protocol that supports distributed real-time control and multiplexing for use within road vehicles. It is applicable... | |
| ISO 11898-5:2007 specifies the CAN physical layer for transmission rates up to 1 Mbit/s for use within road vehicles. It describes the medium access unit functions as well as some... | |
| ISO 11900-1:2007 specifies the dimensions and tolerances, in millimetres, of ball-lock punch retainers, type A (rectangular) and type B (square), for light duty, and of their backing plates. The main... | |
| ISO 11900-2:2008 specifies the dimensions and their tolerances, in millimetres, of reduced ball-lock punch retainers, type C and type D, for light duty, and of their backing plug, the main... | |
| ISO 11900-3:2004 specifies the dimensions and tolerances, in millimetres, of reduced ball-lock punch retainers, type E, for heavy duty, and of their backing plug, the main use being retention of... | |
| ISO 11901-1:2003 specifies the dimensions, in millimetres, nominal initial forces and type of gas springs. It applies to gas springs of type 900 to 100 000, pressurized with nitrogen with... | |
| ISO 11901-2:2004 specifies the dimensions, in millimetres, of mounting base plates, of two-part mounting clamps, of flange mounts and of front end supports intended for use in press tools together... | |
| ISO 11903:2008 specifies the dimensions and their tolerances, in millimetres, of guide pillar mountings intended for mounting with or without guide bush. It also specifies material, and the designation of... | |
| ISO 11904-1:2002 specifies basic framework measurement methods for sound immissions from sound sources placed close to the ear. These measurements are carried out with miniature or probe microphones inserted in... | |
| ISO 11904-2:2004 specifies basic framework measurement methods for sound immission from sound sources placed close to the ear. These measurements are carried out with a manikin, equipped with ear simulators... | |
| ISO 11909:2007 details general test methods for polyisocyanate resins and solutions of polyisocyanate resins intended for use as binders in paints, varnishes and related products. | |
| ISO 11925-2:2010 specifies a method of test for determining the ignitability of products by direct small flame impingement under zero impressed irradiance using vertically oriented test specimens. | |
| ISO 11929:2010 specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the "decision threshold", the "detection limit" and the "limits of the confidence interval" for... | |
| ISO 11930:2012 comprises a preservation efficacy test and a procedure for evaluating the overall antimicrobial protection of a cosmetic product which is not considered low risk. ISO 11930:2012 provides a... | |
| ISO 11940-2:2007 includes pronunciation rules and conversion tables of Thai consonants and vowels. These rules are applied, in order, to each word that can be looked up or compared in... | |
| ISO 11953:2010 describes a classification system for hand-held torque wrenches intended for clinical use. It specifies their performance requirements in terms of accuracy and reproducibility and resistance to reprocessing. Test... | |
| ISO 11960:2010 specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three product specification levels... | |
| ISO 11961:2008 specifies the technical delivery conditions for steel drill pipes with upset pipe body ends and weld-on tool joints for use in drilling and production operations in petroleum and... | |
| ISO 11963:2012 specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p′-isopropylidenediph enyl carbonate). The sheets... | |
| ISO 11971:2008 covers the acceptance criteria for the surface inspection of steel and iron castings by visual examination. | |
| ISO 11979-10:2006 is applicable to any intraocular lens (IOL) whose primary indication is the modification of the refractive power of a phakic eye but excludes phakic IOLs (PIOLs) that utilize... | |
| ISO 11979-4:2008 specifies the labelling requirements for intraocular lenses (IOLs) and the information to be provided within or on the packaging. | |
| ISO 11979-5:2006 specifies particular requirements for the biocompatibility evaluation of materials for intraocular lenses (IOLs) including the processing conditions to produce them. These requirements include evaluation of physicochemical properties that... | |
| ISO 11979-6:2007 specifies tests by which the shelf-life of sterile intraocular lenses (IOLs) in their final packaging can be determined. These tests include procedures to establish the stability of IOLs... | |
| ISO 11979-7:2006 specifies particular requirements for clinical investigations for posterior and anterior chamber monofocal intraocular lenses (IOLs) for the correction of aphakia. | |
| ISO 11979-9:2006 is applicable to any intraocular lens whose optic provides two or more rotationally symmetric powers and whose primary indication is the correction of aphakia with the added benefit... | |
| ISO 11980:2012 gives guidelines for the clinical investigation of the safety and performance of contact lenses and contact lens care products. | |
| ISO 11981:2009 describes the general procedure and performance criteria for assessing the physical compatibility of contact lens care products with contact lenses and for determining whether the observed changes are... | |
| ISO 11986:2010 provides general procedures for the selection of methods, preparation of samples, and conduct of testing for the uptake and release of preservatives from contact lenses. | |
| ISO 11987:2012 specifies test procedures for determining the stability of contact lenses once placed in their final packaging during storage and distribution. | |
| ISO 11990‑2:2010 specifies a method of testing the continuous wave (cw) resistance of the cuff regions of tracheal tubes designed to resist ignition by a laser. Other components of the... | |
| ISO 11990-1:2011 specifies a method of testing the continuous wave (cw) resistance of the shaft of a tracheal tube designed to resist ignition by a laser. It is not applicable... | |
| ISO 11992-1:2003 specifies the interchange of digital information between road vehicles with a maximum authorized total mass greater than 3 500 kg, and towed vehicles, including communication between towed vehicles... | |
| ISO 11992-2:2003 specifies the parameters and messages for electronically controlled braking systems, including ABS (anti-lock braking systems) and for running gear equipment (i.e. systems for steering, suspension and tyres), to... | |
| ISO 11992-3:2002 specifies the parameters and messages for electronically controlled braking systems other than systems for braking and running gear (i.e. steering, suspension and tyres), to ensure the interchange of... | |
| ISO 11992-4:2005 specifies the data communication for diagnostic purposes on a serial data link between a road vehicle and its towed vehicle(s). ISO 11992-4:2005 is applicable to road vehicles of... | |
| ISO 11997-1:2005 describes a method for the determination of the resistance of coatings to one of four defined cycles of wet (salt fog)/dry/humidity conditions using specified solutions. | |
| ISO 12003-1:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) front-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and... | |
| ISO 12003-2:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and... | |
| ISO 12004-1:2008 provides guidelines for developing forming-limit diagrams and forming-limit curves for metal sheets and strips of thicknesses from 0,3 mm to 4 mm. | |
| ISO 12004-2:2008 specifies the testing conditions to be used when constructing a forming-limit curve (FLC) at ambient temperature and using linear strain paths. The material considered is flat, metallic and... | |
| ISO 12005:2003 specifies a method for determining the polarization status and, whenever possible, the degree of polarization of the beam from a continuous wave (cw) laser. It can also be... | |
| ISO 12006-3:2007 specifies a language-independent information model which can be used for the development of dictionaries used to store or provide information about construction works. It enables classification systems, information... | |
| ISO 12010:2012 specifies a method for the quantitative determination of the sum of short-chain polychlorinated n‑alkanes, also known as short-chain polychlorinated paraffins (SCCPs), in the carbon bond range n... | |
| ISO 12013-1:2012 specifies a free damped oscillation method for determining the start temperature of the curing reaction of coatings. | |
| ISO 12013-2:2012 specifies a free damped oscillation method for determining the glass transition temperature of dried and cured films of paints and varnishes. | |
| ISO 12021:2011 specifies an open-loop test method to determine the sensitivity to lateral wind of a vehicle by means of a wind generator. It applies to passenger cars as defined... | |
| ISO 12029:2010 specifies requirements concerning the design of forms for user friendliness, with optimal machine readability for processing by electronic document management systems (EDMS). These requirements are limited to forms... | |
| ISO 12030:2010 specifies a method for determining density variation ratio (DVR) of strips in the case. | |
| ISO 12043:2007 specifies the minimum chamfer dimensions for loose rib and non-rib sides of single-row cylindrical roller bearings of diameter series 0, 2, 3, and 4 (except dimension series 24)... | |
| ISO 12076 specifies a method for determining, by test and calculation, the actual modulus of steel wire ropes within a specified load range. | |
| ISO 12078|IDF 159:2006 specifies a gas liquid chromatographic reference method for the determination of the sterol composition of anhydrous milk fat extracted from dairy products. | |
| ISO 1207:2011 specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. | |
| ISO 12080-1|IDF 142-1:2009 specifies a colorimetric method for the determination of vitamin A in dried skimmed milk containing at least 10 IU (International Units) of vitamin A per gram. | |
| ISO 12080-2|IDF 142-2:2009 specifies a method using high-performance liquid chromatography (HPLC) for the determination of vitamin A in dried skimmed milk containing at least 10 IU (International Units) of vitamin... | |
| ISO 12081|IDF 36:2010 specifies a titrimetric method for the determination of the calcium content of milk and of milk reconstituted from evaporated, condensed or dried milk. | |
| ISO 12082|IDF 52:2006 specifies a method for the calculation of the approximate content of added citrate emulsifying agents and acidifiers/pH-contro lling agents, expressed as citric acid, in processed cheese and... | |
| ISO 12086-1:2006 establishes a system of designation for fluoropolymer materials that may be used as the basis for specifications. It covers the homopolymers and various copolymers of fluoromonomers used as... | |
| ISO 12086-2:2006 describes the preparation of test specimens and provides test methods to define characteristics of thermoplastic fluoropolymer resins. Results from the testing may be used as the basis for... | |
| ISO 1209-1:2007 specifies a simple method for assessing the behaviour of a bar of rigid cellular plastic under the action of three-point bending. It may be used to determine either... | |
| ISO 1209-2:2007 specifies a method for determining the flexural strength and the apparent flexural modulus of elasticity of rigid cellular plastics. | |
| ISO 12090-1:2011 establishes the boundary dimensions and tolerances for series 1, 2 and 3 of linear motion rolling bearings, profiled rail guides. These bearings consist of profiled rails with carriages,... | |
| ISO 12090-2:2011 establishes the boundary dimensions and tolerances for series 4 and 5 of linear motion rolling bearings, profiled rail guides. These bearings consist of profiled rails with carriages, which... | |
| ISO 12098:2004 gives the dimensions of, and specifies the contact allocation and tests and test requirements for, connectors for the electrical connection of equipment other than braking systems and running... | |
| ISO 12099:2010 gives guidelines for the determination by near infrared spectroscopy of constituents such as moisture, fat, protein, starch, and crude fibre as well as parameters such as digestibility in... | |
| ISO 12100:2010 specifies basic terminology, principles and a methodology for achieving safety in the design of machinery. It specifies principles of risk assessment and risk reduction to help designers in... | |
| ISO 12106:2003 specifies a method of testing uniaxially loaded specimens under strain control at constant amplitude, uniform temperature and a strain ratio of -1. It can also be used as... | |
| ISO 12107:2012 presents methods for the experimental planning of fatigue testing and the statistical analysis of the resulting data. The purpose is to determine the fatigue properties of metallic materials... | |
| ISO 12108:2012 describes tests for determining the fatigue crack growth rate from the fatigue crack growth threshold stress-intensity factor range to the onset of rapid, unstable fracture. ISO 12108:2012 is... | |
| ISO 12111:2011 is applicable to the TMF (thermomechanical fatigue) testing of uniaxially loaded metallic specimens under strain control. Specifications allow for any constant cyclic amplitude of mechanical strain and temperature... | |
| ISO 12117-2:2008 establishes a consistent and reproducible means of evaluating the load-carrying characteristics of roll-over protective structures (ROPS) for excavators under static loading, and prescribes performance requirements of a representative... | |
| ISO 1211|IDF 1:2010 specifies the reference method for the determination of the fat content of milk of good physicochemical quality. The method is applicable to raw cow milk, raw sheep... | |
| ISO 12123:2010 gives rules for the specification of raw optical glass. It serves as a complement to ISO 10110, which provides rules specifying finished optical elements. Since raw optical glass... | |
| ISO 12125:2012 specifies the characteristics of prevailing torque type all metal hexagon nuts with flange (with non-metallic insert) of style 2, with metric fine pitch thread with nominal thread diameters... | |
| ISO 12126:2012 specifies the characteristics of prevailing torque type all metal hexagon nuts with flange (style 2), and metric fine pitch thread with nominal thread diameters from 8 mm up... | |
| ISO 12127-1:2007 specifies a test method for the determination of contact heat transmission. It is applicable to protective clothing (including hand protectors) and its contituent materials intended to protect against... | |
| ISO 12127-2:2007 specifies a test method designed to evaluate the heat transfer and the behaviour of materials used for protective clothing when such materials are struck by high temperature metal... | |
| ISO 12133:2011 specifies requirements for the design, construction and installation of carbon monoxide detection and alarm systems in small craft. It also provides educational material about carbon monoxide relative to... | |
| ISO 12136:2011 determines and quantifies the flammability characteristics of materials, in relation to their propensity to support fire propagation, by means of a fire propagation apparatus (FPA). Material flammability characteristics... | |
| ISO 12137:2011 specifies a method for determining, using a curved (loop-shaped or ring-shaped) stylus, the mar resistance of a single coating of a paint, varnish or related product, or the... | |
| ISO 12140:2013 specifies terms and definitions, establishes test procedures, and creates minimum performance requirements for telescopic mechanical screw-type jacks or hydraulic jacks mounted on agricultural implements as original equipment and/or... | |
| ISO 12141:2002 describes a reference method for the measurement of low dust content in ducted gaseous streams at concentrations below 50 mg/m3 under standard conditions. This method has been... | |
| ISO 12151-1:2010 specifies the general and dimensional requirements for the design and performance of hose fittings with O-ring face seal ends in accordance with ISO 8434-3, made of carbon steel,... | |
| ISO 12151-2:2003 specifies the general and dimensional requirements for the design and performance of hose fittings with 24° cone connector ends with O-rings, in accordance with ISO 8434-1 and ISO... | |
| ISO 12151-3:2010 specifies the general and dimensional requirements for the design and performance of flange hose fittings, made of carbon steel, for nominal hose inside diameters of 12,5 mm to... | |
| ISO 12151-4:2007 specifies the general and dimensional requirements for the design and performance of ISO 6149 metric stud end hose fittings made of carbon steel, for nominal hose inside diameters... | |
| ISO 12151-5:2007 specifies the general and dimensional requirements for the design and performance of 37° flared hose fittings in accordance with ISO 8434-2, made of carbon steel, for nominal hose... | |
| ISO 12151-6:2009 specifies the general and dimensional requirements for the design and performance of hose fittings made of carbon steel with 60° cone ends for hose sizes 5 to 51... | |
| ISO 12152:2012 describes a test method based on a single-stage spur gear rig to determine the foaming properties of oils used for the lubrication of gears. This method is used... | |
| ISO 12153:2011 specifies requirements for the classification of tubular cored electrodes for metal arc welding with or without a gas shield of nickel and nickel alloys. It includes those compositions... | |
| ISO 12156-1:2006 specifies a test method using the high-frequency reciprocating rig (HFRR), for assessing the lubricating property of diesel fuels, including those fuels which may contain a lubricity-enhancing additive. It... | |
| ISO 12156-2:2006 specifies the performance requirement (limit) necessary to ensure reliable operation of diesel fuel injection equipment with respect to lubrication by fuel of such equipment. It applies to fuels... | |
| ISO 12161:2006 specifies methods for testing the endurance braking systems of vehicles of categories M, N and O (excluding M1, N1, O1 and O2), which are designed to comply with... | |
| ISO 12162:2009 establishes the classification of thermoplastics materials in pipe form and specifies the material designation. It also specifies a method for calculating the design stress. It is applicable to... | |
| ISO 12164-3:2008 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of shank sizes is... | |
| ISO 12164-4:2008 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-3 to be applied to machine tools (e.g. turning machines,... | |
| ISO 12176-2:2008 specifies performance requirements for electrofusion control units for use with polyethylene (PE) electrofusion fittings for the supply of gaseous fuels or for the conveyance of water for human... | |
| ISO 12176-3:2011 describes the format and the contents of a fusion operator's badge, which is used during the construction of polyethylene (PE) piping systems for the supply of gaseous fuels... | |
| ISO 12176-4:2003 specifies an encoding system for data on components, assembly methods and jointing operations for polyethylene (PE) piping systems for gas supply, for use in a traceability system. Reading... | |
| ISO 1217:2009 specifies methods for acceptance tests regarding volume rate of flow and power requirements of displacement compressors. It also specifies methods for testing liquid-ring type compressors and the operating... | |
| ISO 12180-1:2011 defines the terms and concepts related to cylindricity of individual complete integral features only. | |
| ISO 12180-2:2011 specifies the complete specification operator for cylindricity of complete integral features only, i.e. geometrical characteristics of features of type cylinder | |
| ISO 12181-1:2011 defines the terms and concepts related to the roundness of individual integral features and covers complete roundness profiles only. | |
| ISO 12181-2:2011 specifies the complete specification operator for roundness of integral features only and covers complete roundness profiles only, i.e. geometrical characteristics of features of the type circle. | |
| ISO 12183:2005 specifies an analytical method for the electrochemical assay of pure plutonium nitrate solutions of nuclear grade, with a total uncertainty of 0,1 % to 0,2 % at the... | |
| ISO 12188-1:2010 provides a procedure for evaluating and reporting the accuracy of navigation data determined using positioning devices that are based on GPS, GLONASS, Galileo or similar global navigation satellite... | |
| ISO 12188-2:2012 specifies the process for evaluating and reporting the performance of agricultural vehicles equipped with automated guidance systems based on a global navigation satellite system (GNSS) when operating in... | |
| ISO 12189:2008 specifies methods for fatigue testing of spinal implant assemblies (for fusion or motion preservation) using an anterior support. It is intended to provide a basis for the assessment... | |
| ISO 1219-1:2012 establishes basic elements for symbols. It specifies rules for devising fluid power symbols for use on components and in circuit diagrams. ISO 1219-1:2012 is a collective application standard... | |
| ISO 1219-2:2011 establishes the main rules for drawing hydraulic and pneumatic circuit diagrams using graphical symbols drawn in accordance with ISO 1219-1. ISO 1219-2:2011 also applies to circuit diagrams relating... | |
| ISO 12192:2011 specifies a method for the determination of the edgewise compressive strength (ring crush resistance) of paper and paperboard, especially board used in the manufacture of fibreboard shipping containers. | |
| ISO 12193:2004 specifies a method for the determination of trace amounts (greater than 0,001 mg/kg) of lead in all types of crude or refined edible oils and fats. | |
| ISO 12211:2012 specifies requirements and gives recommendations for the mechanical design, materials selection, fabrication, inspection, testing and preparation for shipment of spiral plate heat exchangers for the petroleum, petrochemical and... | |
| ISO 12212:2012 specifies requirements and gives recommendations for the mechanical design, materials selection, fabrication, inspection, testing and preparation for shipment of hairpin heat exchangers for use in the petroleum, petrochemical... | |
| ISO 12213 specifies methods for the calculation of compression factors of natural gases, natural gases containing a synthetic admixture and similar mixtures at conditions under which the mixture can exist... | |
| ISO 12214:2010 gives design recommendations and requirements for the direction-of-motion of hand controls found in passenger, multipurpose and commercial vehicles, and buses. | |
| ISO 12215-5:2008 applies to the determination of design pressures and stresses, and to the determination of the scantlings, including internal structural members of monohull small craft constructed from fibre reinforced... | |
| ISO 12215-6:2008 concerns structural details and structural components not explicitly included in ISO 12215-5, ISO 12215-7, ISO 12215-8 and ISO 12215-9. It applies to monohull and multihull small craft constructed... | |
| ISO 12215-8:2009 gives requirements on the scantlings of rudders fitted to small craft with a length of hull of up to 24 m, measured according to ISO 8666. It applies... | |
| ISO 12215-9:2011 defines the loads and specifies the scantlings of sailing craft appendages on monohull sailing craft with a length of hull of up to 24 m, measured according to... | |
| ISO 12217-1:2013 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability... | |
| ISO 12217-2:2013 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability... | |
| ISO 12217-3:2013 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft vulnerable to swamping are also encompassed. The evaluation of stability... | |
| ISO 12219-1:2012 describes and specifies the whole vehicle test chamber, the vapour sampling assembly and the operating conditions for the determination of volatile organic compounds (VOCs), and carbonyl compounds in... | |
| ISO 12219-2:2012 specifies the sampling bag test method for measuring volatile organic compounds (VOCs), formaldehyde and other carbonyl compounds which may diffuse from vehicle interior parts into the air inside... | |
| ISO 12219-3:2012 specifies a fast, qualitative and semiquantitative screening method for vapour-phase organic compounds (volatile and some semi-volatile) released from vehicle trim materials under simulated real-use conditions using micro-scale test... | |
| ISO 12219-4:2013 specifies a qualitative and quantitative analytical method for vapour-phase organic compounds (volatile and some semi-volatile) released from car trim materials under simulated real use conditions using small emission... | |
| ISO 12224-3:2003 specifies a wetting balance test method for measuring the flux efficacy of a cored solder wire for the electronics industry. The test is applicable to all classes of... | |
| ISO 1222:2010 specifies the screw connections used between a camera and a tripod or other accessories. | |
| ISO 12232:2006 specifies the method for assigning and reporting ISO speed ratings, ISO speed latitude ratings, standard output sensitivity values, and recommended exposure index values, for digital still cameras. ISO... | |
| ISO 12236:2006 specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics. The test is normally carried out... | |
| ISO 12239:2010 specifies requirements, test methods, performance criteria, and manufacturer's instructions for smoke alarms that operate using scattered light, transmitted light, or ionization, and are intended for household or similar... | |
| ISO 1223:2003 defines the position and dimensions of maximum safe areas of the images on 16 mm and 35 mm motion-picture film, which are transmitted or transferred by television. It... | |
| ISO 1224-1:2007 specifies the characteristics that define instrument precision rolling bearings, metric series, their types, boundary dimensions, tolerances and internal clearance, classifications used for selective assembly, torque definitions and test... | |
| ISO 1224-2:2007 specifies the characteristics that define instrument precision rolling bearings, inch series, their types, boundary dimensions, tolerances and internal clearance, classifications used for selective assembly, torque definitions and test... | |
| ISO 12241:2008 gives rules for the calculation of heat-transfer-relate d properties of building equipment and industrial installations, predominantly under steady-state conditions. ISO 12241:2008 also gives a simplified approach for the... | |
| ISO 12242:2012 specifies requirements and recommendations for ultrasonic liquid flowmeters, which utilize the transit time of ultrasonic signals to measure the flow of single-phase homogenous liquids in closed conduits. There... | |
| ISO 12243:2003 specifies a method for the determination of the amount of water-extractable protein in natural rubber (NR) gloves for medical use. The method is potentially suitable for the determination... | |
| ISO 12251:2011 specifies dimensional requirements for clamp mounted CR fuel injectors and their corresponding cylinder head features in diesel engines. | |
| ISO 12256:2002 specifies the dimensions of metric internal cruciform ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm. | |
| ISO 12257:2008 specifies the dimensions of metric internal six-lobe drives used in metric screws in nominal thread diameter range 3 mm to 20 mm. | |
| ISO 12273:2010 specifies the dimensions of floating, self-aligning, two lug anchor nuts, with MJ threads and a self-locking feature achieved by forming the upper portion out-of-round, of the following classifications:... | |
| ISO 12289:2003 specifies the characteristics and quality assurance requirements for solid rivets made in corrosion-resisting steel for aerospace construction. It is applicable whenever it is referenced in a definition document. | |
| ISO 12301:2007 specifies quality control techniques and inspection of the geometrical and material quality characteristics of the following types of plain bearings: thin-walled half-bearings with or without flange, as specified... | |
| ISO 1230:2007 specifies the definition and determination of the ISO guide number of electronic flash equipment. It does not specify the definitions and measuring methods for the light output of... | |
| ISO 12311:2012 specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear. Other test methods... | |
| ISO 12312-1:2012 is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation. | |
| ISO 12315:2010 describes methods for calculating and reporting the Al2O3 content of smelter-grade alumina, on either a dry or ignited basis, from the results of the determinations in accordance with... | |
| ISO 12319:2006 specifies the requirements for the procurement and quality assurance of 'P' (loop style) clamps used in the installation of aerospace fluid systems. | |
| ISO 12344:2010 specifies the equipment and procedures for determining the bending behaviour of full-size products (Method A) and test specimens (Method B) under the action of three-point loading. It is... | |
| ISO 12345:2013 specifies cleanliness assessment procedures for evaluating the amount of debris found within the clean side of diesel fuel injection assemblies, which could lead to a reduction in the... | |
| ISO 12353-2:2003 describes the suitability of various measures for the determination of impact severity in road vehicle accidents. It also summarizes the main characteristics of the methods used for determining... | |
| ISO 12357-2:2007 lays down test conditions and strength requirements to be met by: drawbar couplings and corresponding drawbar eyes for rigid drawbars which are provided for use on rigid drawbar... | |
| ISO 12384:2010 specifies the requirements for digital measuring methods and digital measuring equipment for aircraft electrical power characteristics, including accuracy, algorithms and digital measuring equipment. The measuring equipment should be... | |
| ISO 12401:2009 specifies the requirements for performance, sizing, marking and test methods for deck safety harnesses and safety lines on recreational craft. It is applicable to harnesses and lines in... | |
| ISO 12402-10:2006 gives guidance for the selection and application of personal flotation devices complying with the other relevant parts of ISO 12402 and immersion suits according to ISO 15027-1 to... | |
| ISO 12402-1:2005 specifies the safety requirements for lifejackets intended for use on seagoing ships with regard to the technical provisions of the International Convention for the Safety of Life at... | |
| ISO 12402-2:2006 specifies the safety requirements for lifejackets, performance level 275. It applies to lifejackets for adults and children for offshore use under extreme conditions. | |
| ISO 12402-3:2006 specifies the safety requirements for lifejackets, performance level 150. It applies to lifejackets used by adults or children. | |
| ISO 12402-4:2006 specifies the safety requirements for lifejackets, performance level 100. It applies to lifejackets used by adults or children. | |
| ISO 12402-5:2006 specifies the safety requirements for buoyancy aids with a buoyancy of not less than 50 N used in sheltered waters with help and rescue close at hand under... | |
| ISO 12402-6:2006 specifies the safety requirements and additional test methods for special purpose lifejackets and buoyancy aids (referred to as special purpose devices within ISO 12402-6:2006) in combination with the... | |
| ISO 12402-7:2006 specifies the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods. | |
| ISO 12402-8:2006 specifies the safety requirements and test methods for accessories used for personal flotation devices (PFDs), with regard to the technical provisions of the International Convention for the Safety... | |
| ISO 12402-9:2006 specifies the test methods for personal flotation devices. | |
| ISO 12405-1:2011 specifies test procedures for lithium-ion battery packs and systems for use in electrically propelled road vehicles. The specified test procedures enable the determination of the essential characteristics of... | |
| ISO 12406:2010 specifies a secondary-ion mass spectrometric method using magnetic-sector or quadrupole mass spectrometers for depth profiling of arsenic in silicon, and using stylus profilometry or optical interferometry for depth... | |
| ISO 12418‑1:2012 establishes a designation system for post-consumer poly(ethylene terephthalate) (PET) bottle recyclates, which may be used as the basis for specifications. The types of PET bottle recyclate are differentiated... | |
| ISO 12418-2:2012 specifies the test methods to be used in determining the properties of post-consumer poly(ethylene terephthalate) (PET) bottle recyclates. | |
| ISO 12439_2010 specifies the requirements for water that is suitable for making concrete in accordance with ISO 22965 (all parts) and describes methods for assessing its suitability. | |
| ISO 12460-1:2007 specifies a 1 m3 chamber method for the determination of the formaldehyde emission from wood-based panels under defined conditions, relating to typical conditions in real-life. | |
| ISO 12460-3:2008 specifies a procedure for determination of accelerated formaldehyde release from wood-based panels using the gas analysis method. | |
| ISO 12460-4:2008 specifies a desiccator method for the determination of the quantity of formaldehyde emitted from particleboard, fibreboard, plywood, oriented strand board (OSB), and wooden laminated flooring. | |
| ISO 12460-5:2011 specifies an extraction method, known as the "perforator method", for the determination of the formaldehyde content of unlaminated and uncoated wood-based panels. | |
| ISO 12465:2007 establishes requirements for the specification of plywood for general and structural use, in dry, tropical dry/humid and high-humidity/exteri or conditions. It includes requirements for the quality of veneer,... | |
| ISO 12466-1:2007 specifies methods for determining the bonding quality of plywood, blockboard, battenboard, and laminboard, bonded with thermosetting resin, by shear testing. | |
| ISO 12466-2:2007 specifies requirements for determination of bonding quality class of plywood, blockboard, battenboard, and laminboard, bonded with thermosetting resins, according to their intended end uses. | |
| ISO 12468-1:2003 specifies a test method to determine the resistance of roofs to external fire exposure. This method evaluates the behaviour of the roof when exposed to two types of... | |
| ISO 12468-2:2005 establishes the classification of roofs tested in accordance with ISO 12468-1. Performance criteria are established with respect to the following: fire penetration or openings; external fire spread; falling... | |
| ISO 12472:2002 specifies a test method for determining the effective sealing capability of intumescent materials or systems in the context of sealing door-to-frame clearances in timber door assemblies. The method... | |
| ISO 12473:2006 covers the general principles of cathodic protection including the criteria for protection, environmental and design considerations and secondary effects of cathodic protection, and is intended as an introduction... | |
| ISO 12474:2010 specifies the characteristics of hexagon socket head cap screws with metric fine pitch thread with nominal thread diameters from 8 mm up to 36 mm and product grade... | |
| ISO 12480-3:2005 establishes required practices for the safe use of tower cranes. It is intended to be used in conjunction with ISO 12480-1. Subjects covered include safe systems of work,... | |
| ISO 12480-4:2007 establishes required practices for the safe use of jib cranes as defined in ISO 4306-1. It is intended to be used in conjunction with ISO 12480-1. | |
| ISO 12488-4:2004 specifies tolerances of cranes and tracks and applies to jib cranes as defined in ISO 4306-1. Tracks for jib cranes negotiating curves are not covered by ISO12488-4:2004. | |
| ISO 1248:2006 specifies the requirements and the corresponding methods of test for all manufactured and natural iron oxide pigments, in dry form, suitable for general use. These pigments are identified... | |
| ISO 12490:2011 defines the requirements for mechanical integrity and sizing of actuators used on valves manufactured under ISO 14313 and API Specification 6D. ISO 12490:2011 is applicable to all types... | |
| ISO 12492:2012 specifies a test method for the determination of water content of raw rubber and compounded rubber using a coulometric Karl Fischer titration method. It applies to the range... | |
| ISO 12493:2011 specifies a method for measuring the stress in tension which is developed in vulcanized rubber when it is heated (thermal stress). The thermal stress is measured for various... | |
| ISO 124:2011 specifies methods for the determination of the total solids content of natural rubber latex concentrate and synthetic rubber latices. These methods are not necessarily suitable for latex from... | |
| ISO 12500-1:2007 specifies the test layout and test procedures required for testing coalescing filters used in compressed-air systems to determine their effectiveness in removing oil aerosols. ISO 12500-1:2007 provides the... | |
| ISO 12500-2:2007 specifies the test layout and test procedures required for testing hydrocarbon vapour adsorbent filters used in compressed air systems to determine their effectiveness in removing hydrocarbon vapours. The... | |
| ISO 12500-3:2009 provides a guide for choosing an appropriate method of determining the solid particulate removal efficiency rating by particle size of filters used in compressed air systems. ISO 12500-3:2009... | |
| ISO 12509:2004 specifies the minimum requirements for installation and performance of lighting, signalling and marking lights, and reflex-reflector devices on earth moving machines. It is applicable to self-propelled wheel or... | |
| ISO 12510:2004 establishes guidelines for the incorporation of design features that promote safety, efficiency, reliability and ease of maintenance and service operations on earth-moving machinery as defined in ISO 6165. | |
| ISO 12543-1:2011 defines terms and describes component parts for laminated glass and laminated safety glass for use in building. | |
| ISO 12543-2:2011 specifies performance requirements for laminated safety glass as defined in ISO 12543-1. | |
| ISO 12543-3:2011 specifies performance requirements for laminated glass as defined in ISO 12543-1. | |
| ISO 12543-4:2011 specifies test methods in respect of resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building. | |
| ISO 12543-5:2011 specifies dimensions, limit deviations and edge finishes of laminated glass and laminated safety glass for use in building. | |
| ISO 12543-6:2011 specifies defects of finished sizes and test methods with regard to the appearance of laminated glass when looking through the glass. ISO 12543-6:2011 is applicable to finished sizes... | |
| ISO 12567-1:2010 specifies a method to measure the thermal transmittance of a door or window system. It is applicable to all effects of frames, sashes, shutters, blinds, screens, panels, door... | |
| ISO 12567-2:2005 specifies a method to measure the thermal transmittance of roof windows and projecting windows. It does not include: edge effects occurring outside the perimeter of the specimen, energy... | |
| ISO 12569:2012 establishes an engineering standard by which to obtain the ventilation rate/specific airflow rate, using a tracer gas in a building space, which is considered to be of a... | |
| ISO 12571:2013 specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products: a) using desiccators and weighing cups (desiccator method); b) using a climatic chamber... | |
| ISO 12573:2010 specifies the dimensional tolerances to be applied to round section inch series tubing used in aircraft. | |
| ISO 12574-2:2008 gives the principal responsibilities of the installers of cellulose-fibre loose-fill thermal insulation products for buildings. If a product is manufactured and packaged according to ISO 12574-1 and then... | |
| ISO 12575-1:2012 specifies the basic performance requirements for the insulating materials that form part of insulating systems used on the exterior of foundations and slabs where the insulation is in... | |
| ISO 125:2011 specifies a method for the determination of the alkalinity of natural rubber latex concentrate. The method is not necessarily suitable for latices from natural sources other than Hevea... | |
| ISO/TC 188 Small craft | |
| ISO/TC 256 Pigments, dyestuffs and extenders | |
| ISO/TC 43 Acoustics | |
| ISO/TC 89 Wood-based panels | |
| ISO11844-1:2006 deals with the classification of low corrosivity of indoor atmospheres. The aim of ISO11844-1:2006 is to characterise indoor atmospheric environments of low corrosivity that can affect metals and metallic... | |
| ISO12230:2012 specifies minimum values for the expected strength as a function of time and temperature in the form of reference lines and tabulated data, for use in calculations on pipes... | |
| Lays down die requirements for a scheme to indicate, by appropriate marking, the functions or contents of rigid pipe assemblies in aircraft and spacecraft systems, but excluding those in aero-engines... | |
| Lays down the requirements for structure and construction rules for standard formatted data units for space data and information transfer systems. | |
| Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 1: General principles, test method and reporting requirements | |
| Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 2: Cycle counting and related data reduction methods | |
| Microbeam analysis -- Electron probe microanalysis -- Methods for elemental-mapping analysis using wavelength-dispersiv e spectroscopy | |
| Micrographics -- Quality control of graphic COM recorders -- Part 1: Characteristics of the test frames | |
| Micrographics -- Quality control of graphic COM recorders -- Part 2: Quality criteria and control | |
| Motorcycle and motorcycle-rider kinematics -- Vocabulary | |
| Ophthalmic implants -- Intraocular lenses -- Part 1: Vocabulary | |
| Ophthalmic implants -- Intraocular lenses -- Part 2: Optical properties and test methods | |
| Ophthalmic implants -- Intraocular lenses -- Part 3: Mechanical properties and test methods | |
| Ophthalmic optics -- Contact lenses -- Ageing by exposure to UV and visible radiation (in vitro method) | |
| Ophthalmic optics -- Contact lenses and contact lens care products -- Information supplied by the manufacturer | |
| Optics and optical instruments -- Microscopes -- Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation) | |
| Optics and optical instruments -- Microscopes -- Marking of stereomicroscopes | |
| Packaging -- Sacks made from thermoplastic flexible film -- Tear propagation on edge folds | |
| Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 2: Wet (salt fog)/dry/humidity/UV light | |
| Photography -- Electronic still picture imaging -- Vocabulary | |
| Photography -- Electronic still-picture cameras -- Resolution measurements | |
| Photography -- Roll film cameras -- Back window location | |
| Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 1: Calculation of thrust pad bearings | |
| Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 2: Functions for the calculation of thrust pad bearings | |
| Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 3: Guide values for the calculation of thrust pad bearings | |
| Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 1: Calculation of tilting pad thrust bearings | |
| Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 2: Functions for calculation of tilting pad thrust bearings | |
| Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 3: Guide values for the calculation of tilting pad thrust bearings | |
| Plain bearings -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves | |
| Plain bearings -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves | |
| Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves | |
| Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves | |
| Plain bearings -- Lubrication holes, grooves and pockets -- Dimensions, types, designation and their application to bearing bushes | |
| Plain bearings -- Quality assurance of thin- walled half bearings -- Design FMEA | |
| Plain bearings -- Quality characteristics -- Calculation of machine and process capabilities | |
| Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method | |
| Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method | |
| Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pyknometer method | |
| Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 1: Guidance | |
| Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 3: Dynamic decomposition method using a travelling furnace | |
| Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 4: Dynamic decomposition method using a conical radiant heater | |
| Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 2: Sheets of thickness less than 1 mm | |
| Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion | |
| Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods | |
| Pneumatic fluid power -- Directional control valves -- Measurement of shifting time | |
| Presents four document type definitions and additional facilities conforming to ISO 8879. Intended to provide document architectures for the creation and interchange of books, articles and serial publications. Specifies the... | |
| Provides detailed information for the application of electrical apparatus to electrically driven or controlled agricultural irrigation machines. Covers all electrical equipment necessary from the point of connection of electric power... | |
| Purpose of this part is to ensure that the design constraints of the intended use of a crane are clearly identified and to define actions to be taken when the... | |
| Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 3: Multi-source test | |
| Relates to the deletion of a reference (ISO/TR 798) and substitution by the reference ISO 1784. Cancels and replaces also references in the table. Amends the last two sentences in... | |
| Road vehicles -- Test dust for filter evaluation -- Part 1: Arizona test dust | |
| Road vehicles -- Test dust for filter evaluation -- Part 2: Aluminium oxide test dust | |
| Road vehicles and internal combustion engines -- Filter vocabulary -- Part 1: Definitions of filters and filter components | |
| Road vehicles and internal combustion engines -- Filter vocabulary -- Part 2: Definitions of characteristics of filters and their components | |
| Rolling bearings -- Needle roller bearings, dimension series 48, 49 and 69 -- Boundary dimensions and tolerances | |
| Rolling bearings -- Steel cylindrical rollers -- Dimensions and tolerances | |
| Rubber -- Determination of magnesium content of field and concentrated natural rubber latex by titration | |
| Rubber latex -- Sampling | |
| Small craft -- Hull construction and scantlings -- Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate | |
| Soil quality -- Guidance on the selection and application of screening methods | |
| Solder wire, solid and flux cored -- Specification and test methods -- Part 1: Classification and performance requirements | |
| Space systems -- Subsystems/units to spacecraft interface control document | |
| Specification and approval of welding procedures for production welding of steel castings | |
| Specification of a semi-quantitative method. The content of free ammonia in a moulded article is of importance, when corrosion of metal inserts or contamination in contact with the article has... | |
| Specifies a gravimetric method for the determination of nickel content of nickel oxide and partially reduced nickel oxide in the range of 70 % to 95 % (m/m). | |
| Specifies a method for quantitative determination consisting in washing the product with chloroform, examining the washings for heavy filth and sand, washing the product with water and agitating it with... | |
| Specifies a method for testing the resistance to compression of complete, filled transport packages and a method for carrying out a stacking test on complete, filled transport packages using the... | |
| Specifies a method for the determination of moisture content of roasted ground coffee by the Karl Fischer titration method. Since it is precise, it is suitable as a reference method. | |
| Specifies a method for the measurement of the particle size of strips of leaf tobacco. Samples of strips are separated into five particle sizes by passing them over four screens. | |
| Specifies a set of 90 graphic characters. Consists of a code table and a legend with explanatory notes containing character codes, graphics and character names. The character set is primarily... | |
| Specifies a system of fits applicable to metallic plain bearings used in general engineering. Not applicable to half-bearings and bushes which are not measured by diameter but by wall thickness,... | |
| Specifies an analytical method for determining the solubility in nitric acid of plutonium in whole pellets of unirradiated mixed oxide fuel (light water reactor fuels). The results provide information about... | |
| Specifies an identification scheme for double-stud tie-down fittings having an omnidirectional rated load capacity of 22 250 N (5 000 lbf) or above in a rail conforming to ISO 7166. | |
| Specifies appropriate dimensions for shank widths and hook heights of latch needles used in the knitting industry. | |
| Specifies dimensions for ports with inch threads for use with the adjustable and non-adjustable stud ends. Also specifies test methods and the designation of these ports. | |
| Specifies dimensions, performance requirements and test procedures for adjustable and non-adjustable heavy-duty (S series) stud ends and for their related O-rings, for general use and fluid power applications. Also specifies... | |
| Specifies dimensions, performance requirements and test procedures for adjustable and non-adjustable light-duty (L series) stud ends and for their related O-rings, for general use and fluid power applications. Also specifies... | |
| Specifies for plain bearings (except thick-walled half-bearings) those quality characteristics in accordance with ISO 12301 which can be used to regulate and control a production process on the basis of... | |
| Specifies requirements for single and double cold-reduced blackplate in the form of coils in nominal minimum widths of 500 mm which are intended for manufacturing tinplate or electrolytic chromium/chromium oxide-coated... | |
| Specifies requirements for single and double cold-reduced electrolytic chromium/chromium oxide-coated steel (ECCS) in the form of sheets or coils in nominal minimum widths of 500 mm. | |
| Specifies requirements for single and double cold-reduced low-carbon mild steel for manufacture of electrolytic tinplate in form of sheets or coils. | |
| Specifies the criteria to be used to determine stability of aircraft loading and servicing equipment, including wind loads. Is intended to define uniform criteria, calculation and testing methods in order... | |
| Specifies the details, dimensions and design of both plug (male) and receptacle (female) which must mate properly to permit interchangeable use of different makes of electrical connectors providing an auxiliary... | |
| Specifies the dimensions of milling cutters intended for manufacturing Woodruff keyseats in accordance with ISO 3912. Relates to Woodruff keyseat cutters with cylindrical shank in accordance with ISO 3338-1 and... | |
| Specifies the methods of intergranular corrosion testing for solution heat-treatable aluminium alloys without protective coatings. Applies to cast and wrought heat-treatable aluminium alloys in the form of castings, forgings, plates,... | |
| Specifies the minimum chamfer dimensions for the non-thrust side of single-row angular contact ball bearing outer rings where the minimum dimensions differ from those specified in ISO 15. Applicable for... | |
| Specifies the requirements and corresponding test methods for pigments composed of finely divided aluminium metal. The specification covers four types of aluminium pigments. Two Types of pigments are further classified... | |
| Specifies the requirements and corresponding test methods. The pigments are suitable for use in paints and/or corrosion-inhibiting coatings. Three types of pigments are distinguished. In one typ only a lead... | |
| Specifies the requirements and relevant methods of measurement and testing of two types of thermoplastic hoses with maximum working pressure of 1 MPa and of 2 MPa, used for flexible... | |
| Specifies the technical requirements of a noise test code for a specific family of machinery and equipment. It is primarily applicable to stationary machinery, including hand-held tools. The purpose of... | |
| Specifies the test methods for quality control of poly(methyl methacrylate) (PMMA) extruded double- and triple-skin flat sheets, obtained from colourless and coloured transparent, translucent and opaque grades of materials. The... | |
| Specifies tolerances on form and position as well as the surface roughness of shafts, flanges and thrust collars as used in plain bearing units. Applicable to journal or thrust plain... | |
| Spherical plain bearings -- Part 1: Radial spherical plain bearings | |
| Spherical plain bearings -- Part 2: Angular contact radial spherical plain bearings | |
| Spherical plain bearings -- Part 3: Thrust spherical plain bearings | |
| Spherical plain bearings -- Part 4: Spherical plain bearing rod ends | |
| Split pins | |
| Stationary source emissions -- Determination of carbon monoxide, carbon dioxide and oxygen -- Performance characteristics and calibration of automated measuring systems | |
| Statistical methods for quality control of building materials and components | |
| Synchronous belt drives -- Automotive belts -- Determination of physical properties | |
| TC 119 Powder metallurgy // SC 4 | |
| TC 160 Glass in building // SC 1 | |
| TC 164 Mechanical testing of metals // SC 4 | |
| TC 188 Small craft // SC 1 | |
| TC 20 Aircraft and space vehicles // SC 4 | |
| TC 22 Road vehicles // SC 22 | |
| TC 23 Tractors and machinery for agriculture and forestry // SC 15 | |
| TC 4 Rolling bearings // SC 7 | |
| TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries // SC 5 | |
| TC 89 Wood-based panels // SC 3 | |
| TC 92 Fire safety // SC 1 | |
| TC 96 Cranes // SC 8 | |
| Textile floor coverings -- Coir mats -- Types and specification | |
| Textile floor coverings -- Determination of friability of attached foams | |
| Textile floor coverings -- Determination of resistance to delamination | |
| Textile floor coverings -- Jute carpet backing fabric -- Specification | |
| Textile floor coverings -- Pure wool, hand-knotted pile carpets -- Specification | |
| Textiles -- Cotton-fibre stickiness -- Detection of sugar by colour reaction | |
| The ability of coatings to withstand wear caused by repeated cleaning operations and to withstand penetration by soiling agents is an important consideration both from a practical point of view... | |
| The material designations shall be based on the chemical composition limits. All material designations shall have the prefix "ISO". International chemical symbols shall be used for the designation of the... | |
| The method is applicable to products having a silica content between 0.005 % (m/m) and 0.025 % (m/m) provided that the content of phosphorus pentoxide plus vanadium pentoxide does not... | |
| The test method described in ISO 12500-4:2009 is designed to determine the water-removal efficiency and operational pressure drop of any device designed for water removal from compressed air described as... | |
| Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series | |
| Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series | |
| This International Standard specifies technical requirements for windows, portlights, hatches, deadlights and doors on small craft of hull length up to 24 m, taking into account the type of craft,... | |
| This International Standard specifies tests and measurement methods for solo motorcycles (defined in ISO 3833) equipped with one or more antilock, and one or more independent, braking systems. It sets... | |
| This International Standard specifies the standard reference temperature for geometrical product specifications. | |
| This part of ISO 12097 establishes a terminology for the components of airbag modules in road vehicles, for use in reference to test methods, environmental test procedures and their requirements. | |
| This part of ISO 12097 establishes uniform test methods and specifies environmental procedures and requirements for the inflator assemblies of airbag modules in road vehicles. NOTE For testing of the... | |
| This part of ISO 12215 specifies requirements for core materials for structural use and materials that are embedded in sandwich construction. It is applicable to small craft with a hull... | |
| This part of ISO 12215 specifies requirements for materials intended for use in the construction of the hull, superstructure and appendages, in particular: weldable normal and higher strength hot-rolled steel... | |
| This part of ISO 12215 specifies workshop conditions, material storage and handling, and requirements for the manufacturing of the craft. It applies to small craft with a hull length (... | |
| This part of ISO 12353 establishes a terminology relating to the investigation and analysis of road traffic accidents and to the application of accident data. | |
| Tolerances for shaft raceway | |
| Tools for moulding -- Components of compression and injection moulds and diecasting dies -- Terms and symbols | |
| Tower cranes -- Stability requirements | |
| Two-wheeled mopeds -- Antilock braking systems (ABS) -- Tests and measurement methods | |
| Water quality -- Determination of arsenic -- Atomic absorption spectrometric method (hydride technique) | |
| Water quality -- Determination of nitrogen -- Part 1: Method using oxidative digestion with peroxodisulfate | |
| Within the field of health informatics this ISO 12052:2006 addresses the exchange of digital images, and information related to the production and management of those images, between both medical imaging... |
| << Prev | Next >> |