ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Acoustics -- Measurement of sound absorption properties of road surfaces in situ -- Part 1: Extended surface method | |
| Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 2: Determination, verification and application of precision data | |
| Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 4: Field measurements of airborne sound insulation between rooms | |
| Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 5: Field measurements of airborne sound insulation of façade elements and façades | |
| Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 7: Field measurements of impact sound insulation of floors | |
| Acoustics -- Stationary audible warning devices used outdoors -- Part 1: Field measurements for determination of sound emission quantities | |
| Addition of Annex B: Proppand specification | |
| Aerospace -- Airframe needle roller bearings, single-row, shielded -- Inch series | |
| Aerospace -- Airframe needle roller, cylindrical roller and track roller bearings -- Technical specification | |
| Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Inch series | |
| Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Metric series | |
| Aerospace -- Airframe needle track roller, yoke type, double-row, sealed -- Inch series | |
| Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Inch series | |
| Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Metric series | |
| Aerospace -- Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated -- Dimensions | |
| Aerospace -- Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated -- Dimensions | |
| Aerospace -- Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated -- Dimensions | |
| Aerospace -- Inserts, with clearance hole, in metallic material, coated or uncoated -- Dimensions | |
| Aerospace -- Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated -- Dimensions | |
| Aerospace -- Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa... | |
| Agricultural irrigation equipment -- Plastics saddles for polyethylene pressure pipes | |
| Air quality -- Assessment of uncertainty of a measurement method under field conditions using a second method as reference | |
| Air quality -- Determination of ozone in ambient air -- Ultraviolet photometric method | |
| Air-assisted agricultural sprayers -- Data sheets -- Part 1: Typical layout | |
| Air-assisted agricultural sprayers -- Data sheets -- Part 2: Technical specifications related to components | |
| Aluminium alloy gas cylinders -- Operational requirements for avoidance of neck and shoulder cracks | |
| Ambient air -- Determination of asbestos fibres -- Indirect-transfer transmission electron microscopy method | |
| Applies to optical imaging systems in the optical spectral region from 100 nm to 1 m. Telescopic systems are also included. The standard refers to the relative irradiance in the... | |
| Austenitic manganese steel castings | |
| Barite 4,1 | |
| Binders for paints and varnishes -- Rosin -- Sampling and sample preparation for colour measurement | |
| Bonded abrasive products -- Limit deviations and run-out tolerances | |
| Building construction -- Jointing products -- Specifications for test substrates | |
| Centrifugally cast steel and alloy products -- Part 1: General testing and tolerances | |
| Characterization of pavement texture by use of surface profiles -- Part 1: Determination of Mean Profile Depth | |
| Cold-reduced steel sheet of higher yield strength with improved formability | |
| Contains a spectrometric method for the determination of the total phosphorus content of meat and meat products, including poultry. | |
| Contains the evaluation process for determining parameters from the linear representation of the material ratio curve which describes the increase of the material portion of the surface with increasing depth... | |
| Copper, lead and zinc sulfide concentrates -- Determination of mass of contained metal in a lot | |
| Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels | |
| Deals with the determination of the total luminous transmittance, in the visible region of the spectrum, of planar transparent and substantially colourless plastics, using a single-beam photometer with a specified... | |
| Decribes a filtering method for use with surfaces having stratified functional properties. The surfaces have a relatively small amount of waviness. This filtering method suppresses the valley influence on the... | |
| Defines left and right sides of single-sided machines, double-sided machines with lateral driving unit and double-sided machines with centre driving unit. | |
| Describes a method for the determination of the ability of sealants to resist differing degrees of exposure to water under conditions of service. Assesses for specified duration of time the... | |
| Describes a method for the enumeration of viable Brochothrix thermosphacta in meat and meat products, including poultry, by means of a colony-count technique. | |
| Describes a procedure for the assessment of whether liquefied petroleum gas hydrocarbons consisting predominantly of propane and/or propene are sufficiently dry to avoid malfunctions in pressure-reducing systems installed in domestic... | |
| Describes a pyrolytic method (A) and two chemical degradation methods (B and C) for the determination of the carbon black content of artificial rubber and copolymers. Replaces the second edition,... | |
| Describes methods for the determination of chemical and mechanical changes in properties of poly(L-lactide) under in vitro degradation testing conditions.The poly L-lactid is used for the manufacture of surgical implants. | |
| Design to minimize defeat possibilities | |
| Determination of silver in silver jewellery alloys -- Volumetric (potentiometric) method using sodium chloride or potassium chloride | |
| Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 1: Threaded connections | |
| Earth-moving machinery -- Trenchers -- Definitions and commercial specifications | |
| Environmental labels and declarations -- Self-declared environmental claims (Type II environmental labelling) | |
| Environmental labels and declarations -- Type I environmental labelling -- Principles and procedures | |
| Environmental management -- Environmental assessment of sites and organizations (EASO) | |
| Ergonomics of the thermal environment -- Vocabulary and symbols | |
| Gas welding equipment -- Acetylene manifold systems for welding, cutting and allied processes -- General requirements | |
| Gas welding equipment -- Small kits for gas brazing and welding | |
| Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve | |
| Geotextiles and geotextile-related products -- Abrasion damage simulation (sliding block test) | |
| Geotextiles and geotextile-related products -- Determination of tensile creep and creep rupture behaviour | |
| Geotextiles and geotextile-related products -- Method for installing and extracting samples in soil, and testing specimens in laboratory | |
| Geotextiles and geotextile-related products -- Strength of internal structural junctions -- Part 1: Geocells | |
| Ginger and its oleoresins -- Determination of the main pungent components (gingerols and shogaols) -- Method using high-performance liquid chromatography | |
| Gives a method for the derivation of reduction factors to be used to obtain the maximum allowable operating pressure for elevated-temperature operation of polyethylene (PE) pipeline systems. Applicable to fluids... | |
| Gives dimensions of 110-size cartridges, locations and dimensions of film exposure notches and film identification notches inclusively dimensions of 110-size film and backing paper. Replaces ISO 7374, ISO 7330 and... | |
| Gives guidance on quality levels of imperfections in electron and laser beam welded joints in steel. Three levels are given which refer to production quality. | |
| Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres | |
| Hard coal and coke -- Mechanical sampling -- Part 1: General introduction | |
| Hard coal and coke -- Mechanical sampling -- Part 2: Coal -- Sampling from moving streams | |
| Hard coal and coke -- Mechanical sampling -- Part 3: Coal -- Sampling from stationary lots | |
| Hard coal and coke -- Mechanical sampling -- Part 4: Coal -- Preparation of test samples | |
| Hard coal and coke -- Mechanical sampling -- Part 5: Coke -- Sampling from moving streams | |
| Hard coal and coke -- Mechanical sampling -- Part 6: Coke -- Preparation of test samples | |
| Hard coal and coke -- Mechanical sampling -- Part 7: Methods for determining the precision of sampling, sample preparation and testing | |
| Hard coal and coke -- Mechanical sampling -- Part 8: Methods of testing for bias | |
| High-pressure decorative laminates -- Composite elements -- Part 1: Test methods | |
| In ISO 13520 procedures are covered for estimating ferrite content in certain grades of austenitic iron-chromium-nickel alloy castings that have compositions balanced to create the formation of ferrite as a... | |
| Industrial automation systems and integration -- Parts library -- Part 1: Overview and fundamental principles | |
| Industrial automation systems and integration -- Parts library -- Part 20: Logical resource: Logical model of expressions | |
| Industrial automation systems and integration -- Parts library -- Part 26: Logical resource: Information supplier identification | |
| Industrial automation systems and integration -- Parts library -- Part 31: Implementation resources: Geometric programming interface | |
| Industrial variable-reach trucks -- Part 1: Stability tests | |
| Industrial variable-reach trucks -- Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above | |
| ISO 13408-4:2005 specifies the general requirements for clean-in-place (CIP) processes applied to product contact surfaces of equipment used in the manufacture of sterile health care products by aseptic processing and... | |
| ISO 13408-5:2006 specifies the general requirements for sterilization in place (SIP) applied to product contact surfaces of the equipment used in the manufacture of sterile health care products by aseptic... | |
| ISO 13408-6:2005 specifies the requirements for isolator systems used for aseptic processing and offers guidance on qualification, bio-decontamination, validation, operation and control of isolator systems used for aseptic processing of... | |
| ISO 13408-7:2012 specifies requirements and provides guidance on alternative approaches to process simulations for the qualification of the aseptic processing of medical devices and combination products that cannot be terminally... | |
| ISO 13426-2:2005 describes index tests for determining the strength of the internal structural junctions of all geocomposites and of clay geosynthetic barriers. | |
| ISO 13428:2005 describes an index test for the determination of the protection efficiency of a geosynthetic on a hard surface, exposed to the impact load of a hemispherical object. The... | |
| ISO 1342:2012 specifies certain characteristics of the essential oil of rosemary (Rosmarinus officinalis L.), in order to facilitate assessment of its quality. | |
| ISO 13433:2006 specifies a method to determine the resistance of geosynthetics to penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of... | |
| ISO 13435:2011 specifies dimensions and tolerances for bars for drop wires for electrical warp stop motions with continuous contact rail (form E1) or inner split contact rail (form E2). | |
| ISO 13438:2004 specifies a screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation. The test is applicable to polypropylene- and polyethylene-based products. The data are... | |
| ISO 13442:2004 sets the designation, dimensions, load ratings and reference speeds for tyres and rims fitted to construction machines (backhoe loaders, small dumpers, loaders, excavators etc.) operating on building sites... | |
| ISO 13444:2012 specifies a series of knurling dimensions intended for general use in mechanical engineering and is intended to avoid an unnecessary multiplicity of tools by restricting the profile angle... | |
| ISO 13445:2003 specifies a method for the determination of the shear strength of adhesives used to bond materials with elastic moduli higher than the elastic modulus of the adhesive. The... | |
| ISO 13448-1:2005 provides guidelines specifying the organizational principles of acceptance sampling in situations where the contract or the legislation provides for successive inspection to be carried out by different parties:... | |
| ISO 13448-2:2004 provides attributes sampling procedures and single sampling plans for successive independent inspections of the same lot conducted by the supplier, consumer and/or a third party. ISO 13448-2:2004 addresses... | |
| ISO 13457:2008 specifies the construction, operational requirements and test methods for water‑driven chemical injector pumps, used to inject chemicals into irrigation systems. The chemicals include liquid fertilizers and solutions of... | |
| ISO 13459:2012 specifies the trainer-seat deflection limiting volume (DLV), space envelope and performance requirements, and dimensions, for use in laboratory evaluations of protective structures on earth‑moving machinery as defined in... | |
| ISO 13465:2009 specifies an analytical method for determining the neptunium concentration by spectrophotometry, with a standard deviation of about 5 %, in nitric acid solutions of nuclear reactor irradiated fuels,... | |
| ISO 1346:2012 specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes, 8-strand braided ropes and 12-strand braided ropes for general service made of polypropylene and gives rules for their designation. | |
| ISO 13472-2:2010 specifies a test method for measuring in situ the sound absorption coefficient of road surfaces for the one-third-octave-ban d frequencies ranging from 250 Hz to 1 600 Hz... | |
| ISO 13473-2:2002 defines terms, expressions and parameters that are related to the analysis of pavement texture, on roads as well as on airport runways and taxiways. In particular, it defines... | |
| ISO 13473-3:2002 specifies requirements for profilometers used in pavement engineering in order to give meaningful and accurate measurement of micro-, macro- and megatexture characteristics of paved road and airfield surfaces. | |
| ISO 13473-5:2009 specifies procedures for determining the average depth or level of pavement surface megatexture by measuring the profile curve of a surface and calculating megatexture descriptors from this profile. | |
| ISO 13474:2009 specifies the framework of an engineering method for calculating a statistical distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment. It... | |
| ISO 13477:2008 specifies a small-scale (S4) test method for determining the arrest or propagation of a crack initiated in a thermoplastics pipe at a specified temperature and internal pressure. ISO... | |
| ISO 13478:2007 specifies a full-scale test (FST) method for determining the arrest or propagation of a crack initiated in a thermoplastics pipe at a specified temperature and internal pressure. The... | |
| ISO 13479:2009 specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms of time to failure in a hydrostatic pressure test on... | |
| ISO 13485:2003 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and... | |
| ISO 13491-1:2007 specifies the requirements for secure cryptographic devices (SCDs) based on the cryptographic processes defined in ISO 9564, ISO 16609 and ISO 11568. ISO 13491-1:2007 has two primary purposes:... | |
| ISO 13491-2:2005 specifies checklists to be used to evaluate secure cryptographic devices (SCDs) incorporating cryptographic processes, as specified in parts 1 and 2 of ISO 9564, ISO 16609 and parts... | |
| ISO 13492:2007 describes a key management related data element that can be transmitted either in transaction messages to convey information about cryptographic keys used to secure the current transaction, or... | |
| ISO 13500:2008 covers physical properties and test procedures for materials manufactured for use in oil- and gas-well drilling fluids. The materials covered are barite, haematite, bentonite, nontreated bentonite, OCMA-grade bentonite,... | |
| ISO 13501:2011 specifies a standard procedure for assessing and modifying the performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing. | |
| ISO 13503-2:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations. "Proppants" mentioned henceforth in ISO 13503-2:2006 refer to sand, ceramic media, resin-coated proppants, gravel-packing... | |
| ISO 13503-3:2005 covers the physical properties, potential contaminants and test procedures for heavy brine fluids manufactured for use in oil and gas well drilling, completion and workover fluids. ISO 13503-3:2005... | |
| ISO 13503-4:2006 provides for consistent methodology to measure fluid loss of stimulation and gravelpack fluid under static conditions. However, the procedure in ISO 13503-4:2006 excludes fluids that react with porous... | |
| ISO 13503-5:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel packing operations. ISO 13503-5:2006 provides a consistent methodology for testing performed on hydraulic fracturing and/or... | |
| ISO 13504:2012 specifies general requirements for the manufacture of instruments and related accessories used in the placement of dental implants and further manipulations of connecting parts in the craniofacial area. | |
| ISO 13506:2008 provides the general principles of a test method for evaluating the performance of complete garments or protective clothing ensembles in a flash fire or other short duration exposures. | |
| ISO 13507:2012 provides a list of short terms for analytical characteristics to be used in certificates of analysis for rubber compounds, raw rubbers and compounding materials. | |
| ISO 13517:2013 specifies a method for determining the flow rate of metallic powders, including powders for hardmetals and mixes of metallic powders and organic additives such as lubricants, by means... | |
| ISO 13526:2010 specifies a standard message format for use in exchanging spacecraft tracking data between space agencies. Such exchanges are used for distributing tracking data output from routine interagency cross-supports,... | |
| ISO 13527:2010 defines how the packaging of data and metadata, including software, can be put into a single package (e.g. file or message) in order to facilitate information transfer and... | |
| ISO 13528:2005 complements ISO Guide 43 (all parts) by providing detailed descriptions of sound statistical methods for organizers to use to analyse the data obtained from proficiency testing schemes, and... | |
| ISO 1352:2011 specifies the conditions for performing torsional, constant-amplitude, nominally elastic stress fatigue tests on metallic specimens without deliberately introducing stress concentrations. The tests are carried out at ambient temperature... | |
| ISO 13537:2010 presents a reference architecture for space data systems (RASDS). The RASDS is intended to provide a standardized approach for description of data system architectures and high-level designs, which... | |
| ISO 13541:2010 specifies two standard message formats for use in transferring spacecraft attitude information between space agencies: the attitude parameter message (APM) and the attitude ephemeris message (AEM). Such exchanges... | |
| ISO 13542:2006 specifies the internal diameters and tolerances for cores recommended for general use with reels of paper and board in international trade. | |
| ISO 13555-1:2002 establishes the preconditioning phase of the procedure for checking the dynamic setting of fuel injection equipment fitted to diesel engines, this preconditioning being carried out prior to the... | |
| ISO 13555-2:2002 specifies a test method for referencing the pressure rise in the high-pressure pipe of a diesel fuel injection system consisting of fuel injection pump, high-pressure pipe or pipes... | |
| ISO 13559|IDF 153:2002 specifies a method for the enumeration of contaminating microorganisms by means of the colony-count technique at 30 °C. The method is applicable to butter, fermented milks and... | |
| ISO 13564-1:2012 specifies the requirements and test procedures for all-round visibility of self-propelled industrial trucks with a rated capacity up to and including 10 000 kg, and industrial variable‑reach trucks... | |
| ISO 13571:2012 is one of many tools available for use in fire safety engineering. It is intended to be used in conjunction with models for analysis of the initiation and... | |
| ISO 13573:2012 describes the methodology for thermal cycling corrosion testing (known as cyclic oxidation testing) of metallic materials in gaseous environments between ambient and elevated temperatures (series of measurements on... | |
| ISO 13577-1:2012 specifies the general safety requirements common to industrial furnaces and associated processing equipment (TPE). It details significant hazards associated with TPE, and specifies the appropriate preventive measures for... | |
| ISO 13579-1:2013 specifies a general methodology for measuring energy balance and calculating the efficiency of the process involving industrial furnaces and associated processing equipment as designed by furnace manufacturers. This... | |
| ISO 13579-2:2013 specifies a general methodology for measuring energy balance and calculating the efficiency of the process involving reheating furnaces for steel as designed by furnace manufacturers. This general methodology... | |
| ISO 13579-3:2013 specifies general methodology for measuring energy balance and calculating the efficiency of the process involving batch-type aluminium melting furnaces as designed by furnace manufacturers. This general methodology includes... | |
| ISO 13579-4:2013 specifies general methodology for measuring energy balance and calculating the efficiency of the process involving furnaces with protective or reactive atmosphere as designed by the furnace manufacturers. This... | |
| ISO 13580|IDF 151:2005 specifies a reference method for the determination of the total solids content of plain, flavoured, sweetened and fruit yogurts. | |
| ISO 13583-2:2003 specifies cast steel and alloy grades for elevated temperature service pieces manufactured by centrifugal casting. | |
| ISO 13584-101:2003 specifies a particular representation category, called basic_geometry. This representation category captures the generic concept of the shape of a part. It may be associated with any of... | |
| ISO 13584-102:2006 specifies a representation category, called ISO10303_rep. This representation category captures the generic concepts used to describe the representation of a product in ISO 10303 application protocols. ISO... | |
| ISO 13584-24:2003 provides generic EXPRESS resource constructs that support the description of different kinds of information about supplier libraries. It also contains a set of integrated EXPRESS information models for... | |
| ISO 13584-25:2004 provides generic EXPRESS resource constructs that support the description of aggregate data types and values occurring in supplier libraries. It also contains an integrated EXPRESS information model for... | |
| ISO 13584-32:2010 specifies an XML-based exchange structure for ISO 13584 compliant data. This exchange structure is called OntoML. | |
| ISO 13584-42:2010 specifies the principles to be used for defining characterization classes of parts and properties of parts which provide for characterizing a part independently of any particular supplier-defined identification. | |
| ISO 13584-501:2007 specifies the requirements for an ISO-registered reference dictionary for measuring instruments with their properties and domains of values. ISO 13584-501:2007 also establishes and specifies the behaviour of a... | |
| ISO 13584-511:2006 specifies a reference dictionary for representing fasteners with their properties and domains of values, as they are described in the various ISO mechanical fastener standards. These fasteners include... | |
| ISO 13585:2012 specifies basic requirements for the qualification testing of brazers and brazing operators providing conditions for brazing, testing, examination, acceptance criteria and range of qualification for certificates. | |
| ISO 13588:2012 specifies the application of the phased array technology for the semi- or fully automated ultrasonic testing of fusion-welded joints in metallic materials of minimum thickness 6 mm. It... | |
| ISO 13590:2003 applies to personal watercraft, for the construction and installation of builder's plate, permanently installed petrol fuel systems, electrical systems, steering systems, ventilation, hull structure and floatation, and requirements... | |
| ISO 13602-1 provides methods to analyse, characterize and compare technical energy systems (TESs) with all their inputs, outputs and risk factors. It contains rules and guidelines for the methodology for... | |
| ISO 13602-2:2006 establishes guiding principles for the weighting and aggregation of energywares to ensure that energyware statistics at different levels of aggregation are transparent and comparable. | |
| ISO 13606-1:2008 specifies the communication of part or all of the electronic health record (EHR) of a single identified subject of care between EHR systems, or between EHR systems and... | |
| ISO 13606-2:2008 specifies the information architecture required for interoperable communications between systems and services that need or provide EHR data. ISO 13606-2:2008 is not intended to specify the internal architecture... | |
| ISO 13606-3:2009 is for the communication of part or all of the electronic health record (EHR) of a single identified subject of care between EHR systems, or between EHR systems... | |
| ISO 13606-5:2010 specifies the information architecture required for interoperable communications between systems and services that need or provide EHR data. The subject of the record or record extract to be... | |
| ISO 13613:2011 provides shipboard personnel and other parties information concerning operational maintenance and testing for certain critical systems. Proper maintenance of these systems can help reduce the risk of ship... | |
| ISO 13616-1:2007 specifies the elements of an international bank account number (IBAN) used to facilitate the processing of data internationally in data interchange, in financial environments as well as within... | |
| ISO 13616-2:2007 describes the Registration Authority (RA) responsible for the registry of IBAN formats that are compliant with ISO 13616-1, the procedures for registering ISO 13616-compliant IBAN formats and the... | |
| ISO 13623:2009 specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries. | |
| ISO 13624-1:2009 pertains to the design, selection, operation and maintenance of marine riser systems for floating drilling operations. Its purpose is to serve as a reference for designers, for those... | |
| ISO 13625:2002 specifies requirements and gives recommendations for the design, rating, manufacturing and testing of marine drilling riser couplings. Coupling capacity ratings are established to enable the grouping of coupling... | |
| ISO 13626:2003 specifies requirements and gives recommendations for suitable steel structures for drilling and well-servicing operations in the petroleum industry, provides a uniform method of rating the structures, and provides... | |
| ISO 13628-10:2005 defines the technical requirements for safe, dimensionally and functionally interchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for... | |
| ISO 13628-11:2007 provides guidelines for the design, analysis, manufacture, testing, installation and operation of flexible pipes and flexible pipe systems for onshore, subsea and marine applications. ISO 13628-11:2007 supplements ISO... | |
| ISO 13628-15:2011 addresses recommendations for subsea structures and manifolds, within the frameworks set forth by recognized and accepted industry specifications and standards. As such, it does not supersede or eliminate... | |
| ISO 13628-1:2005 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. ISO 13628-1:2005 is intended as an umbrella... | |
| ISO 13628-2:2006 defines the technical requirements for safe, dimensionally and functionally interchangeable flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for the... | |
| ISO 13628-4:2010 provides specifications for subsea wellheads, mudline wellheads, drill-through mudline wellheads and both vertical and horizontal subsea trees. It specifies the associated tooling necessary to handle, test and install... | |
| ISO 13628-5:2009 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and associated ancillary equipment for the petroleum and natural... | |
| ISO 13628-6:2006 is applicable to design, fabrication, testing, installation and operation of subsea production control systems. ISO 13628-6:2006 covers surface control system equipment, subsea-installed control system equipment and control fluids. | |
| ISO 13628-7:2005 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel. It is applicable to... | |
| ISO 13628:2002 gives functional requirements and guidelines for ROV interfaces on subsea production systems for the petroleum and natural gas industries. It is applicable to both the selection and use... | |
| ISO 13629-1:2012 specifies a test method for the quantitative determination of the antifungal activity by measuring the intensity of luminescence produced by an enzymatic reaction [adenosine triphosphate (ATP) method]. ISO... | |
| ISO 13631:2002 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged skid-mounted, reciprocating, separable or integral compressors with lubricated cylinders and their... | |
| ISO 13641-1:2003 specifies a screening method for assessing the potential toxicity of substances, mixtures, surface waters, groundwaters and wastewaters, effluents, sludges or other environmental samples by determining the production of... | |
| ISO 13641-2:2003 specifies a screening method for assessing the potential toxicity of substances, mixtures, surface waters, groundwaters and wastewaters, effluents, sludges, or other environmental samples by determining the production of... | |
| ISO 13655:2009 establishes procedures for the measurements and colorimetrical computations appropriate to objects that reflect, transmit, or self-illuminate, including flat-panel displays. It also establishes procedures for computation of colorimetric parameters... | |
| ISO 13666:2011 defines basic terms relating to ophthalmic optics, specifically to semi-finished spectacle lens blanks, finished spectacle lenses and fitting purposes. Terms relating to processes and materials for fabrication and... | |
| ISO 13674-1:2010 specifies a test schedule that addresses a particular aspect of the on-centre handling characteristics of a vehicle: the weave test. It is applicable to passenger cars in accordance... | |
| ISO 13674-2:2006 specifies a test schedule that addresses the transition test, a particular aspect of the on-centre handling characteristics of a vehicle. It is applicable to passenger cars in accordance... | |
| ISO 13678:2010 provides requirements, recommendations and methods for the testing of thread compounds intended for use on threaded casing, tubing, and line pipe connections; and for thread compounds intended for... | |
| ISO 13679:2002 establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a... | |
| ISO 13680:2010 specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock for two product specification levels: PSL-1, which is the basis of ISO... | |
| ISO 13686:2013 specifies the parameters required to describe finally processed and, where required, blended natural gas. The main text of ISO 13686:2013 contains a list of these parameters, their units... | |
| ISO 13693-1:2013 specifies the general requirements and test methods for small plastics-bodied valves used for chemigation, intended for operation in irrigation pipe systems which may contain fertilizers and chemicals of... | |
| ISO 13695:2004 specifies methods by which the spectral characteristics such as wavelength, bandwidth, spectral distribution and wavelength stability of a laser beam can be measured. ISO 13695:2004 is applicable to... | |
| ISO 13696:2002 specifies procedures for the determination of the total scattering by coated and uncoated optical surfaces. Procedures are given for measuring the contributions of the forward scattering and backward... | |
| ISO 13697:2006 specifies measurement procedures for the precise determination of the specular reflectance and regular transmittance of optical laser components. The accuracy of the described test methods exceeds that of... | |
| ISO 13704:2007 specifies the requirements and gives recommendations for the procedures and design criteria used for calculating the required wall thickness of new tubes and associated component fittings for petroleum-refinery... | |
| ISO 13705:2012 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air heaters, fans and burners for general refinery... | |
| ISO 13706:2011 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas... | |
| ISO 13709:2009 specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. ISO 13709:2009 is... | |
| ISO 13710:2004 specifies requirements for reciprocating positive-displacemen t pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting and power-frame... | |
| ISO 13720:2010 specifies a method for the enumeration of presumptive Pseudomonas spp. present in meat and meat products, including poultry. | |
| ISO 13726:2008 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories have been designed specifically for use... | |
| ISO 13732-3:2005 provides methods for the assessment of the risk of cold injury and other adverse effects when a cold surface is touched by bare-hand/finger skin. It provides ergonomics data... | |
| ISO 13733:2012 specifies the design, size and technical requirements for universal fairleads with upper roller(s) installed to lead the mooring rope of a ship. | |
| ISO 13736:2013 specifies a method for the determination of the manual and automated closed-cup flash point of combustible liquids having flash points between −30,0 °C to 75,0 °C . However,... | |
| ISO 13737:2004 specifies a method for determining the cone penetration of lubricating greases at low temperatures. | |
| ISO 13738:2011 specifies the requirements of lubricating oils (hereinafter referred to as "two-stroke oils") to be used in two-stroke-cycle spark-ignition gasoline engines which employ a crankcase scavenging system and are... | |
| ISO 13739:2010 specifies procedures and requirements for the transfer of bunkers to vessels involving bunker tankers, road tankers and shore pipelines. It applies to pre-delivery, delivery and post-delivery checks and... | |
| ISO 13765-1:2004 describes a method for the determination of the consistency of refractory mortars using a penetrating cone. | |
| ISO 13765-2:2004 describes a method for the determination of the consistency of refractory mortars using a reciprocating flow table. | |
| ISO 13765-3:2004 describes a method of determination of joint stability of refractory mortars. | |
| ISO 13765-4:2004 describes a method of determination of the flexural bonding strength of the bonded face between refractory bricks laid with refractory mortars (after drying and firing). | |
| ISO 13765-5:2004 describes a method for determining the grain size distribution of refractory mortars by sieve analysis. | |
| ISO 13765-6:2004 describes a method for determining the moisture content of ready-mixed refractory mortars. | |
| ISO 13766:2006 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility of earth-moving machinery as defined in ISO 6165. The following electromagnetic phenomena are evaluated: broadband... | |
| ISO 13769:2007 specifies stamp marking of refillable transportable gas cylinders and tubes of volume greater than 0,5 l and less than or equal to 3 000 l, including: steel and... | |
| ISO 13772:2009 specifies a method for checking the functioning and performance of the non‑manually actuated chain brake on a portable hand-held chain-saw used for forest or tree service. | |
| ISO 13779-1:2008 specifies requirements for ceramic hydroxyapatite intended for use as surgical implants. It applies to hydroxyapatite blocks. ISO 13779-1:2008 does not apply to hydroxyapatite coatings, hydroxyapatite powder or nanoparticle-type... | |
| ISO 13779-2:2008 specifies requirements for ceramic hydroxyapatite coatings applied to metallic or non-metallic surgical implants. ISO 13779-2:2008 does not cover coatings made from glasses, glass ceramics, alpha- and beta-calcium orthophosphate... | |
| ISO 13779-3:2008 specifies methods of test for the chemical analysis and assessment of crystallinity and phase composition of hydroxyapatite-based materials such as coatings and sintered products. | |
| ISO 13784-2:2002 specifies a test method for determining the reaction to fire of sandwich panel building systems for large rooms and the resulting flame spread on or within the sandwich... | |
| ISO 13785-1:2002 specifies a screening method for determining the reaction to fire of materials and constructions of façades or claddings when exposed to heat from a simulated external fire with... | |
| ISO 13785-2:2002 specifies a method of test for determining the reaction to fire of materials and construction of façade claddings when exposed to heat and flames from a simulated interior... | |
| ISO 13786:2007 specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials... | |
| ISO 13787:2003 establishes a procedure for the determination and verification of declared thermal conductivity, as a function of temperature, of thermal insulating materials and products used for the insulation of... | |
| ISO 13788:2012 gives simplified calculation methods for: The internal surface temperature of a building component or building element below which mould growth is likely, given the internal temperature and relative... | |
| ISO 13789:2007 specifies a method and provides conventions for the calculation of the steady-state transmission and ventilation heat transfer coefficients of whole buildings and parts of buildings. It is applicable... | |
| ISO 13790:2008 gives calculation methods for assessment of the annual energy use for space heating and cooling of a residential or a non-residential building, or a part of it, referred... | |
| ISO 13791:2011 specifies the assumptions, boundary conditions, equations and validation tests for a calculation procedure, under transient hourly conditions, of the internal temperatures (air and operative) during warm periods, of... | |
| ISO 13792:2011 specifies the required input data for simplified calculation methods for determining the maximum, average and minimum daily values of the operative temperature of a room in warm periods:... | |
| ISO 13822:2010 provides general requirements and procedures for the assessment of existing structures (buildings, bridges, industrial structures, etc.) based on the principles of structural reliability and consequences of failure. It... | |
| ISO 13823:2008 specifies general principles and recommends procedures for the verification of the durability of structures subject to known or foreseeable environmental actions, including mechanical actions, causing material degradation leading... | |
| ISO 13824:2009 specifies general principles on risk assessment of systems involving structures. The focus is on strategic and operational decision-making related to design, assessment, maintenance and decommissioning of structures. This... | |
| ISO 13826:2013 specifies a test method of thermal diffusivity of thermally sprayed ceramic coatings using laser technology. This test method is applicable to self-standing thermally sprayed ceramic coatings of thickness... | |
| ISO 1382:2012 is a trilingual (English/French/Russ ian) vocabulary containing the definitions of approximately 400 terms in general use in the rubber industry. | |
| ISO 13832:2013 specifies the dimensions, electrical characteristics and mechanical characteristics of aluminium-based and copper-clad aluminium (CCA) conductors, for lightweight aircraft electrical cables and aerospace applications. It applies to stranded conductors... | |
| ISO 13833:2013 specifies sampling methods and analysis methods for the determination of the ratio of biomass- and fossil-derived carbon dioxide (CO2) in the CO2 from exhaust gases... | |
| ISO 13837:2008 specifies test methods to determine the direct and total solar transmittance of safety glazing materials for road vehicles. Two computational conventions (denoted convention “A” and convention “B”) are... | |
| ISO 13849-1:2006 provides safety requirements and guidance on the principles for the design and integration of safety-related parts of control systems (SRP/CS), including the design of software. For these parts... | |
| ISO 13849-2:2012 specifies the procedures and conditions to be followed for the validation by analysis and testing of the specified safety functions, the category achieved, and the performance level achieved... | |
| ISO 13850:2006 specifies functional requirements and design principles for the emergency stop function on machinery, independent of the type of energy used to control the function. It is applicable to... | |
| ISO 13855:2010 establishes the positioning of safeguards with respect to the approach speeds of parts of the human body. It specifies parameters based on values for approach speeds of parts... | |
| ISO 13856-1:2013 establishes general principles and specifies requirements for the design and testing of pressure-sensitive mats and pressure-sensitive floors normally actuated by the feet for use as devices for protecting... | |
| ISO 13856-2:2012 establishes general principles and specifies requirements for the design and testing of pressure-sensitive edges and pressure-sensitive bars used as safeguards and not as actuating devices for normal operation. | |
| ISO 13856-3:2013 establishes general principles and specifies requirements for the design and testing of those pressure-sensitive protective devices, with or without an external reset facility, that are not specified in... | |
| ISO 13857:2007 establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also... | |
| ISO 13874-1:2002 specifies a test method for determining the reaction to fire of sandwich panel building systems for small rooms and the resulting flame spread on or within the sandwich... | |
| ISO 13875|IDF 178:2005 specifies a method for the quantitative determination of the beta-lactoglobulin content, soluble at pH 4,6, in liquid milk. The method has been tested over a range between... | |
| ISO 13884:2003 specifies a method for the accurate determination of isolated trans bonds in natural or processed long-chain fatty acids, fatty acid esters and triglycerides with trans isomer levels greater... | |
| ISO 13885-1:2008 describes the determination of the molar-mass distribution, number-average molar mass Mn and mass-average molar mass Mw of polymers that are soluble in THF (tetrahydrofuran) by gel... | |
| ISO 13894-2:2005 describes the general properties of composite elements surfaced, and possibly edged, with high-pressure decorative laminate (HPDL). The composite elements specified consist of HPDL sheet material adhesively bonded to... | |
| ISO 13897:2003 specifies requirements and test methods for predosed capsules and for reusable capsules used for mixing dental amalgam alloys and mercury. | |
| ISO 13899-2:2005 specifies a method for the determination of the niobium content in steel by means of inductively coupled plasma emission spectrometry. This method is applicable to niobium contents between... | |
| ISO 13903:2005 describes the determination of free (synthetic and natural) and total (peptide-bound and free) amino acids in feeding stuffs, using an amino acid analyser or HPLC equipment. It is... | |
| ISO 13904:2005 describes the determination of the total and free tryptophan in feeding stuffs (e.g. complete and complementary feeds, supplementary feeds, raw materials, ingredients, premixtures and concentrates. It does not... | |
| ISO 13906:2008 specifies a method for the determination of acid detergent fibre (ADF) insoluble residue and acid detergent lignin (ADL) in all types of animal feeding stuffs. The limit of... | |
| ISO 13910:2005 specifies sampling, full-size testing and evaluation procedures for the assessment of the characteristic values of the structural properties of sawn timber for use in codes dealing with structural... | |
| ISO 13912:2005 establishes the basic principles for rules and procedures governing the machine sorting of timber for use in structural applications. | |
| ISO 13918:2008 specifies requirements for studs and ceramic ferrules for arc stud welding, dimensions, materials, mechanical properties and, when required, conditions of evaluation of conformity. | |
| ISO 13921:2008 specifies the dimensions of 100° reduced countersunk head screws with internal offset cruciform ribbed or unribbed drive, with close or large tolerance normal shank and short or medium... | |
| ISO 13926-1:2004 specifies the design, dimensions, materials, performance and test methods for glass cylinders used with pen-injectors for medical use. It applies to the primary container used in direct contact... | |
| ISO 13926-2:2011 specifies the shape, dimensions, material, performance requirements and labelling of plunger stoppers for pen-injectors for medical use. | |
| ISO 13930:2007 specifies a method to provide a relative measure for evaluating the degree of size degradation of iron ores when reduced under conditions resembling those prevailing in the low-temperature... | |
| ISO 13931:2013 specifies two methods (i.e. method A and method B) for the determination of the volume resistivity of carbon fibre. | |
| ISO 13934-1:2013 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method. The method is mainly applicable to woven textile... | |
| ISO 13936-2:2004 is intended for the determination of the resistance offered by thread systems of woven fabric, to slippage at a sewn seam. The method described is suitable for all... | |
| ISO 13936-3:2004 describes a method for the determination of the resistance offered by the yarns of a woven fabric to slippage while being held in a needle clamp under conditions... | |
| ISO 13939:2012 describes a method of comparing the performance test results of foil journal bearings, which are lubricated by air (gas) and supported by hydrodynamic force generated by the rotation... | |
| ISO 13944:2012 specifies a method for the determination of the lubricant content of a powder mix. The method is also suitable for preparing samples for measuring the content of elements,... | |
| ISO 13947:2011 specifies a metallographic method for determining the non-metallic inclusion level in metal powders using a powder-forged specimen. The test method covers repress powder-forged test specimens in which there... | |
| ISO 13948-2:2012 specifies requirements for the connection ends of push-on connections used with fuel injection equipment. Three types of push-on connections (types A, B and C) are described in ISO... | |
| ISO 13950:2006 specifies the characteristics of automatic recognition systems (numerical recognition by means of bar codes or magnetic cards, electromechanical recognition using implanted-resistor connectors and self-regulation systems) that enable the... | |
| ISO 13956:2010 specifies a method for the evaluation of the ductility of the fusion joint interface of assemblies of polyethylene (PE) pipe and electrofusion or heated tool saddles, intended for... | |
| ISO 13958:2009 specifies minimum requirements for concentrates used for haemodialysis and related therapies. For the purpose of this International Standard, “concentrates” are a mixture of chemicals and water, or a... | |
| ISO 13959:2009 specifies minimum requirements for water to be used in the preparation of concentrates, dialysis fluids for haemodialysis, haemodiafiltration and haemofiltration and for the reprocessing of haemodialysers. ISO 13959:2009... | |
| ISO 13960:2010 specifies requirements for sterile, single use plasmafilters, intended for use on humans. | |
| ISO 13967:2009 specifies a method of determining the ring stiffness of bends and branches made from thermoplastic material and for use with plastics pipes having a circular cross-section. The method... | |
| ISO 13968:2008 specifies a method for testing the ring flexibility of a thermoplastics pipe having a circular cross-section. The method enables determination of the deflection, and necessary force, at which... | |
| ISO 13969|IDF 183:2003 gives guidance for a standardized description of microbial inhibitor tests for milk and milk products. It is intended to give a framework and basis for the evaluation/validatio... | |
| ISO 13970:2011 specifies requirements for snorkelling guide training programmes and the criteria to be met that permit a training organization to award a snorkelling guide qualification indicating that the requirements... | |
| ISO 13971:2012 describes requirements, design and installation of flexible pipe elements (e.g. metallic flexible pipe, metallic flexible tube, vibration isolator, expansion joint) and non-metallic tube used in the refrigerant circuits... | |
| ISO 13975:2012 specifies a method of evaluating the ultimate anaerobic biodegradability of plastic materials in a controlled anaerobic slurry digestion system with a solids concentration not exceeding 15 %, which... | |
| ISO 13976:2005 applies to hot-rolled carbon/manganese steel sheet of structural quality,without the use of microalloying elements. The product is intended for structural purposes where particular mechanical properties are required. It... | |
| ISO 13982-1:2004 specifies the minimum requirements for chemical protective clothing resistant to penetration by airborne solid particles (Type 5). These garments are full-body protective clothing, i.e. covering trunk, arms and... | |
| ISO 13982-2:2004 specifies a test method to determine the barrier efficiency of chemical protective clothing against aerosols of dry, fine dusts. | |
| ISO 13985:2006 specifies the construction requirements for refillable fuel tanks for liquid hydrogen used in land vehicles as well as the testing methods required to ensure that a reasonable level... | |
| ISO 13988:2008 specifies procedures and minimum performance requirements for testing without tyres the retention of clip balance weights for use on wheels for passenger vehicles. It also specifies general features... | |
| ISO 13990-1:2006 establishes a vocabulary of basic terms relating to yarn feeders and yarn control of single thread for knitting machines. | |
| ISO 13990-2:2006 specifies the connecting dimensions for the mounting and electrical installation of yarn feeders and yarn control devices, as defined in ISO13990-1, for knitting machines. | |
| ISO 13990-3:2006 specifies the dimensions of multi-wire connecting cable and interconnection cable of low voltage for the electrical installation of yarn feeders and yarn control devices according to ISO 13990-2. | |
| ISO 13992:2006 specifies the main characteristics of touring ski-bindings and describes, as an example, the test methods A and B. ISO 13992:2006 applies, in principle, to touring ski-bindings for alpine... | |
| ISO 13994:2005 describes a laboratory test method that enables determination of the resistance of materials used in protective clothing to visible penetration under the conditions of continuous liquid contact and... | |
| ISO 13998:2003 is applicable to protective aprons, trousers and vests for use with hand knives, and to other garments which provide similar protection to parts of the body in accidents. | |
| ISO 13999-2:2003 specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and protective sleeves made of materials other than chain mail... | |
| ISO 139:2005 defines the characteristics and use of a standard atmosphere for conditioning, for determining the physical and mechanical properties of textiles and a standard alternative atmosphere that may be... | |
| ISO 140-14:2004 concerns field measurements of airborne sound insulation and impact sound insulation, and is to be used as a supplement to ISO 140-4 and ISO 140-7. It contains guidelines... | |
| ISO 140-18:2006 specifies a laboratory method of measurement of the impact sound insulation of roofs, roof/ceiling systems and skylights excited by artificial rainfall. The results obtained can be used for... | |
| ISO 14001:2004 specifies requirements for an environmental management system to enable an organization to develop and implement a policy and objectives which take into account legal requirements and other requirements... | |
| ISO 14004:2004 provides guidance on the establishment, implementation, maintenance and improvement of an environmental management system and its coordination with other management systems. The guidelines in ISO 14004:2004 are applicable... | |
| ISO 14005:2010 provides guidance for all organizations, but particularly small- and medium-sized enterprises, on the phased development, implementation, maintenance and improvement of an environmental management system. It also includes advice... | |
| ISO 14006:2011 provides guidelines to assist organizations in establishing, documenting, implementing, maintaining and continually improving their management of ecodesign as part of an environmental management system (EMS). ISO 14006:2011 is... | |
| ISO 14025:2006 establishes the principles and specifies the procedures for developing Type III environmental declaration programmes and Type III environmental declarations. It specifically establishes the use of the ISO 14040... | |
| ISO 1402:2009 specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies, including methods for the determination of dimensional stability. | |
| ISO 14031:2013 gives guidance on the design and use of environmental performance evaluation (EPE) within an organization. It is applicable to all organizations, regardless of type, size, location and complexity. | |
| ISO 1403:2005 specifies the requirements for three types of general-purpose textile-reinforced rubber water hose with an operating temperature range of -25 °C to +70 °C and a maximum working pressure... | |
| ISO 14040:2006 describes the principles and framework for life cycle assessment (LCA) including: definition of the goal and scope of the LCA, the life cycle inventory analysis (LCI) phase, the... | |
| ISO 14044:2006 specifies requirements and provides guidelines for life cycle assessment (LCA) including: definition of the goal and scope of the LCA, the life cycle inventory analysis (LCI) phase, the... | |
| ISO 14045:2012 describes the principles, requirements and guidelines for eco-efficiency assessment for product systems including: the goal and scope definition of the eco-efficiency assessment; the environmental assessment; the product-system-value assessment; | |
| ISO 14050:2009 defines terms of fundamental concepts related to environmental management, published in the ISO 14000 series of International Standards. | |
| ISO 14051:2011 provides a general framework for material flow cost accounting (MFCA). Under MFCA, the flows and stocks of materials within an organization are traced and quantified in physical units... | |
| ISO 14063:2006 gives guidance to an organization on general principles, policy, strategy and activities relating to both internal and external environmental communication. It utilizes proven and well-established approaches for communication,... | |
| ISO 14064-1:2006 specifies principles and requirements at the organization level for quantification and reporting of greenhouse gas (GHG) emissions and removals. It includes requirements for the design, development, management, reporting... | |
| ISO 14064-2:2006 specifies principles and requirements and provides guidance at the project level for quantification, monitoring and reporting of activities intended to cause greenhouse gas (GHG) emission reductions or removal... | |
| ISO 14064-3:2006 specifies principles and requirements and provides guidance for those conducting or managing the validation and/or verification of greenhouse gas (GHG) assertions. It can be applied to organizational or... | |
| ISO 14065:2013 specifies principles and requirements for bodies that undertake validation or verification of greenhouse gas (GHG) assertions. | |
| ISO 14066:2011 specifies competence requirements for validation teams and verification teams. ISO 14066:2011 complements the implementation of ISO 14065. ISO 14066:2011 is not linked to any particular greenhouse gas (GHG)... | |
| ISO 1407:2011 specifies four methods for the quantitative determination of the material extractable from raw rubbers, both natural and synthetic; two of the methods are also applicable to the unvulcanized... | |
| ISO 14087:2011 describes a test method for the determination of the bending force of leather. | |
| ISO 14088:2012 specifies a test method for the determination of tanning agents through filteration of all vegetable and synthetic tanning products. | |
| ISO 14096-1:2005 specifies procedures for the evaluation of basic performance parameters of the radiographic film digitisation process such as spatial resolution and spatial linearity, density range, density contrast sensitivity and... | |
| ISO 14096-2:2005 specifies three film-digitisation quality classes for the requirements of non-destructive testing. The selected class depends on the radiation energy, penetrated material thickness and the quality level of the... | |
| ISO 1409:2006 specifies a ring method for the determination of the surface tension of polymer dispersions and rubber latices (natural and synthetic). The method is valid for polymer dispersions and... | |
| ISO 14113:2007 specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied and dissolved gases up to a maximum working pressure of 45 MPa (450... | |
| ISO 14116:2008 specifies the performance requirements for the limited flame spread properties of materials, material assemblies and protective clothing in order to reduce the possibility of the clothing burning and... | |
| ISO 14117:2012 specifies test methodologies for the evaluation of the electromagnetic compatibility (EMC) of active implantable cardiovascular devices that provide one or more therapies for bradycardia, tachycardia and cardiac resynchronization. | |
| ISO 15536-1:2006 provides temperature threshold values for burns that occur when human skin is in contact with a hot solid surface. It also describes methods for the assessment of the... | |
| ISO/TC 199 Safety of machinery | |
| ISO/TC 203 Technical energy systems | |
| ISO/TC 210 Quality management and corresponding general aspects for medical devices | |
| ISO13936-1:2004 is intended for the determination of the resistance offered by thread systems of woven fabric, to slippage at a sewn seam. | |
| ISO13943:2008 defines terminology relating to fire safety as used in International Standards and other documents of the International Standardization Organization and the International Electrotechnical Committee. | |
| Lays down the requirements for Control Authority procedures for standard formatted data units used in space systems. Technically identical with CCSDS 630.0.B-1-1993. | |
| Lead sulfide contentrates -- Determination of lead content -- EDTA titration method after acid digestion | |
| Light-gauge metal containers -- Round open-top cans -- Internal diameters | |
| Liquefied petroleum gases -- Determination of oily residues -- High-temperature method | |
| Liquid hydrogen -- Land vehicle fuelling system interface | |
| Machinery for forestry -- Feller-bunchers -- Terms, definitions and commercial specifications | |
| Machinery for forestry -- Forwarders -- Terms, definitions and commercial specifications | |
| Machinery for forestry -- Wheeled skidders -- Terms, definitions and commercial specifications | |
| Meat and meat products -- Detection of colouring agents -- Method using thin-layer chromatography | |
| Meat and meat products -- Determination of chloramphenicol content -- Method using liquid chromatography | |
| Meat and meat products -- Determination of starch and glucose contents -- Enzymatic method | |
| Mechanical vibration and shock -- Hand-arm vibration -- Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system | |
| Natural gas -- Guidelines to traceability in analysis | |
| Natural gas -- Organic sulfur compounds used as odorants -- Requirements and test methods | |
| Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel -- Guidelines to help in the definition of a product specification | |
| Optics and optical instruments -- Lasers and laser-related equipment -- Test methods for laser beam power (energy) density distribution | |
| Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees | |
| Pen systems -- Part 3: Seals for pen-injectors for medical use | |
| Petroleum and natural gas industries -- Completion fluids and materials -- Part 1: Measurement of viscous properties of completion fluids | |
| Petroleum and natural gas industries -- Content and drafting of a functional specification | |
| Petroleum and natural gas industries -- Content and drafting of a technical specification | |
| Petroleum and natural gas industries -- Control and mitigation of fires and explosions on offshore production installations -- Requirements and guidelines | |
| Petroleum and natural gas industries -- Design and installation of piping systems on offshore production platforms | |
| Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 3: Through flowline (TFL) systems | |
| Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 9: Remotely Operated Tool (ROT) intervention systems | |
| Petroleum and natural gas industries -- Drilling and production equipment -- Drill-through equipment | |
| Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment | |
| Petroleum and natural gas industries -- Drilling and production equipment -- Inspection, maintenance, repair and remanufacture of hoisting equipment | |
| Petroleum and natural gas industries -- High-speed special-purpose gear units | |
| Petroleum and natural gas industries -- Pipeline transportation systems -- Welding of pipelines | |
| Petroleum and natural gas industries -- Reciprocating compressors | |
| Plain bearings -- Quality assurance of thin-walled half bearings -- Selective assembly of bearings to achieve a narrow clearance range | |
| Plastics -- Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach | |
| Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument | |
| Plastics -- Film and sheeting -- Non-oriented poly(ethylene terephthalate) (PET) sheets | |
| Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector | |
| Plastics -- Verification of pendulum impact-testing machines -- Charpy, Izod and tensile impact-testing | |
| Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles | |
| Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies | |
| Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm | |
| Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance | |
| Plastics pipes for the conveyance of fluids under pressure -- Miner's rule -- Calculation method for cumulative damage | |
| Plastics piping systems -- Elastomeric-sealing- ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection | |
| Plastics piping systems -- Elastomeric-sealing- ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure | |
| Plastics piping systems -- End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping -- Test method for long-term leaktightness under internal water pressure | |
| Plastics piping systems -- Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading | |
| Plastics piping systems -- Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints -- Test method for leaktightness and strength while subjected to bending and internal pressure | |
| Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 1: Direct liquid injection method... | |
| Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 2: Headspace method | |
| Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint | |
| Polyethylene pipes -- Resistance to slow crack growth -- Cone test method | |
| Projection on a screen of the magnified images of the profiles of wool fibre pieces and measurement of their width by means of a graduated scale. The operating technique assures... | |
| Protective clothing -- General requirements | |
| Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 1: Chain-mail gloves and arm guards | |
| Protective clothing -- Mechanical properties -- Determination of resistance to cutting by sharp objects | |
| Protective clothing -- Mechanical properties -- Determination of resistance to puncture | |
| Protective clothing -- Mechanical properties -- Test method for the determination of the resistance to puncture and dynamic tearing of materials | |
| Provides specifications for the connections of cloth rollers on weaving machines for the purposes of automation of roller changing. This permits the rollers for different weaving machines to be changed... | |
| Purpose is to enable the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. Specifies minimum gaps relative to parts of the human body. Applicable when... | |
| Rental ski shop practice -- Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications | |
| Replaces "r" by "R" in equation (5). | |
| Requirements for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature for fusion welding. Also applicable to other welding processes. Does not apply for the measurement of post... | |
| Revised Clause 6 | |
| Road vehicles -- Hydraulic braking systems -- Part 1: Double-flare pipes, tapped holes, male fittings and tube seats | |
| Road vehicles -- Ignition coils -- Electrical characteristics and test methods | |
| Road vehicles -- Localization of exhaust system leaks and equipment specifications | |
| Rubber -- Polychloroprene latex -- Determination of alkalinity | |
| Rubber and plastics hoses for fuels for internal-combustion engines -- Method of test for flammability | |
| Rubber hoses for agricultural spraying | |
| Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards | |
| Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection | |
| Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of fixed means of access between two levels | |
| Safety of machinery -- Prevention of unexpected start-up | |
| Ships and marine technology -- Manoeuvring of ships -- Part 1: General concepts, quantities and test conditions | |
| Ships and marine technology -- Manoeuvring of ships -- Part 2: Turning and yaw checking | |
| Ships and marine technology -- Manoeuvring of ships -- Part 3: Yaw stability and steering | |
| Ships and marine technology -- Manoeuvring of ships -- Part 4: Stopping, acceleration, traversing | |
| Ships and marine technology -- Manoeuvring of ships -- Part 5: Submarine specials | |
| Ships and marine technology -- Manoeuvring of ships -- Part 6: Model test specials | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Closed chocks | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Cruciform bollards | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Mooring chocks | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Panama chocks | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Pedestal fairleads | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Recessed bitts (Casting type) | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Recessed bitts (Steel plate type) | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Shipside roller fairleads | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Steel rollers | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Universal fairleads without upper roller | |
| Ships and marine technology -- Ship's mooring and towing fittings -- Welded steel bollards for sea-going vessels | |
| Ships and marine technology -- Shipboard incinerators -- Requirements | |
| Simultaneous determination of uranium and plutonium in dissolver solutions from reprocessing plants -- Combined method using K-absorption edge and X-ray fluorescence spectrometry | |
| Single side loading fork-lift trucks -- Part 1: Stability tests | |
| Single side loading fork-lift trucks -- Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above | |
| Small craft -- Backfire flame control for petrol engines | |
| Small craft -- Portable fuel systems for outboard motors | |
| Small craft -- Steering gear -- Geared link systems | |
| Soil quality -- Determination of polynuclear aromatic hydrocarbons -- Method using high -performance liquid chromatography | |
| Soil quality -- Determination of total nitrogen content by dry combustion ("elemental analysis") | |
| Specifies a method for the determination of the potential cation exchange capacity (CEC) of soil buffered at pH = 8,1 and of the determination of the content of exchangeable sodium,... | |
| Specifies a procedure for the determination of alkyl nitrate in diesel fuel in the concentration range 0,03 % bis 0,30 % (volume fraction 0,03 % bis 0,30 %). The presence... | |
| Specifies general tolerances for linear and angular dimensions and for shape and position of welded structures in four classes, these being based on customary workshop accuracy. The main criterion for... | |
| Specifies standard procedures and requirements for the detection and classification of localized overheating on ground surfaces by chemical etch methods. Does apply to steel parts such as gears, shafts, splines... | |
| Specifies the characteristics of, and corresponding test methods for, unalloyed tantalum in form of sheets, rods and wires used in the manufacture of surgical implants. | |
| Specifies the essential characteristics and the principles of calibration of compression testing machines used in testing of paper, board and corrugated fibreboard. | |
| Specifies the indications which should be available on all drawings of straight bevel gears. In any special case they shall be completed by necessary data. Gives dimensions and general characteristics... | |
| Specifies the standard reference conditions of temperature, pressure and humidity to be used for measurements and calculations carried out on natural gases and similar fluids. | |
| Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation | |
| Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace | |
| Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: General requirements and sample dissolution | |
| Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of nickel content | |
| Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of copper content | |
| Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 4: Determination of cobalt content | |
| TC 106 Dentistry // SC 6 | |
| TC 138 Plastics pipes, fittings and valves for the transport of fluids // SC 4 | |
| TC 207 Environmental management // SC 1 | |
| TC 207 Environmental management // SC 3 | |
| TC 38 Textiles // SC 24 | |
| TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries // SC 3 | |
| TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries // SC 4 | |
| TC 94 Personal safety -- Protective clothing and equipment // SC 13 | |
| Technical drawings -- Edges of undefined shape -- Vocabulary and indications | |
| Technical energy systems -- Basic concepts | |
| Technical energy systems -- Structure for analysis -- Energyware supply and demand sectors | |
| Technical product documentation -- Organization and naming of layers for CAD -- Part 1: Overview and principles | |
| Technical product documentation -- Organization and naming of layers for CAD -- Part 2: Concepts, format and codes used in construction documentation | |
| Test method for the determination of the volume of total residual in the tank for agricultural sprayers used for crop protection and fertilization. | |
| Textile floor coverings -- Determination of resistance to staining by acid food colours | |
| Textile floor coverings -- Guidelines for installation and use on stairs | |
| Textile machinery and accessories -- Hexagon nuts and slotted nuts for spinning and twisting spindles | |
| Textiles -- Bursting properties of fabrics -- Part 1: Hydraulic method for determination of bursting strength and bursting distension | |
| Textiles -- Bursting properties of fabrics -- Part 2: Pneumatic method for determination of bursting strength and bursting distension | |
| Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 1: Determination of maximum force to seam rupture using the strip method | |
| Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 2: Determination of maximum force to seam rupture using the grab method | |
| Textiles -- Tear properties of fabrics -- Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) | |
| Textiles -- Tear properties of fabrics -- Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) | |
| Textiles -- Tear properties of fabrics -- Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) | |
| Textiles -- Tear properties of fabrics -- Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) | |
| Textiles -- Tensile properties of fabrics -- Part 2: Determination of maximum force using the grab method | |
| The document also specifies the methods to be used for the determination of density at 20 °C, for the determination of dry residue after evaporation on a water bath, for... | |
| The document also specifies the methods to be used for the following tests: measurements of colour; determination of density at 20 °C; determination of water content; determination of iodine value... | |
| The method is applicable in the range from about -50 °C to about +250 °C. the determination can be carried out directly on the sample as received, or on the... | |
| The method is applicable to products having acidities equal to or greater than 0.0008 % (m/m). The principle consists in the dilution of a test portion with carbon dioxide-free water,... | |
| The method is applicable to products having aldehyde contents in the range 0.00025 % (m/m) to 0.00125 % (m/m). The principle is based on the reaction of the aldehydes present... | |
| The method is applicable to products having carbonyl compounds contents between 0.00025 % (m/m) and 0.01 % (m/m). The principle is based on reaction in acid medium of the carbonyl... | |
| The method is applicable to products having carbonyl compounds contents equal to or greater than 0.01 % (m/m). The method only allows determination of those carbonyl compounds which react under... | |
| The method is applicable to products having esters contents in the range 0.005 % (m/m) to 0.15 % (m/m). The principle consists in the saponification of esters present in a... | |
| The principle consists in the treatment of a test portion with aniline and acetic acid, the presence of furfural leading to the formation of a characteristic red colour. - International... | |
| The principle is based on distillation of a test portion in the presence of water, addition to the distillate of a saturated sodium chloride solution and measurement of the volume... | |
| The principle is based on the addition of a test portion, under specified conditions, of potassium permanganate solution. Determination of the time taken for the colour of this test solution... | |
| The principle is based on the conversion of methanol present in a test portion to formaldehyde by oxidation. The oxidation is carried out with a solution of potassium permanganate in... | |
| The principle is based on the conversion of the methanol present in a test portion to formaldehyde by oxidation with a solution of potassium permanganate in phosphoric acid. Reaction of... | |
| The principle of the procedure consists in addition of water to a test portion, under specified conditions, and examination for opalescence against a black background with side illumination, using a... | |
| Thermal performamce of buildings - Thermal design of foundations to avoid frost heave | |
| Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications | |
| Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications | |
| Thermoplastics pipes and fittings -- Nominal ring stiffnesses | |
| This International Standard establishes guiding principles for the development and use of environmental labels and declarations. It is intended that other applicable standards in the ISO 14020 series be used... | |
| This International Standard specifies a method for the determination of the edgewise crush resistance of corrugated fibreboard. The force is applied in the direction of the flute axis. This method... | |
| This International Standard specifies methods for the determination of discharge in open channels in steady flow conditions using vertical underflow gates on a flat horizontal floor between vertical side walls... | |
| This International Standard specifies the safety requirements of a two-hand control device and the dependency of the output signal from the input signals. It describes the main characteristics of two-hand... | |
| This part of ISO 13779 specifies test methods for measurement of the adhesion strength of hydroxyapatite coatings intended for use on components of surgical implants. | |
| This part of ISO 13999 specifies an impact cut test for use on fabric, leather and other materials used in protective clothing materials, gloves and arm guards. This test assesses... | |
| Trenchless applications of ductile iron pipes systems -- Product design and installation | |
| Vitreous and porcelain enamels -- Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry | |
| Vitreous and porcelain enamels for aluminium -- Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) | |
| Water quality -- Determination of the genotoxicity of water and waste water using the umu-test | |
| Welding -- Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys | |
| Zinc sulfide concentrates -- Determination of zinc content -- Hydroxide precipitation and EDTA titrimetric method |
| << Prev | Next >> |