ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 1.1 ISO 2580-1:2002 establishes a system of designation for acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials, which may be used as the basis for specifications. 1.2 The types of ABS... | |
| A method is specified for determining the value cited in the title of loose disorientated cotton fibres taken from bales, laps, and slivers, or other sources of lint cotton. The... | |
| Addition to the specific regional requirements in Japan | |
| Aerospace -- Lockwire -- Diameters | |
| Applicable to all hand-knotted carpets with pile capable of being shorn from the woven ground. Not applicable to carpets of different tuft leg lengths, unless the areas can be measured... | |
| Applicable to determining the quantities contained either in all the test solution or in the aliquot portion of between 1 g and 20 g that is taken for the determination. | |
| Application guidance for the valve-proving system | |
| Applies to reamers, screwing taps, etc. It comprise two series of dimensions. The complete range of diameters is divided into a certain number of diameter steps. In the metric tables,... | |
| Assistive products for blind and vision-impaired persons -- Tactile walking surface indicators | |
| Belt drives -- Pulleys -- Quality, finish and balance | |
| Cancels and replaces the first edition (1972). Describes the requirements and the corresponding methods of test for iron blue pigments. | |
| Cancels and replaces the first edition (1975). Specifies the dimensions for interchangeability between the cutter and the arbor or mandrel, i. e. the diameter of the bore and the arbor... | |
| Cancels and replaces the first edition (1975). Specifies the types and dimensions of the section of shanks for turning and planing tools of high speed steel and with brazed hardmetal... | |
| Cancels and replaces the second edition (1982). Specifies a titrimetric method using ethylenedinitrilotet raacetic acid (EDTA) disodium salt for the determination of the zinc content of all rubber products. The... | |
| Carbide tips for brazing on turning tools | |
| Cardiovascular implants -- Endovascular devices -- Part 2: Vascular stents | |
| Centre drills for centre holes with protecting chamfer -- Type B | |
| Centre drills for centre holes with radius form -- Type R | |
| Conveyor belts with textile carcass -- Widths and lengths | |
| Corkwood in planks, virgin cork, ramassage, gleanings, corkwood refuse and corkwaste -- Determination of moisture content | |
| Defines terms in English, French and Russian relating to fork arms for fork lift trucks, complying with ISO 2328, ISO 2329 and ISO 2330. Some figures illustrate the meaning and... | |
| Defines terms used to describe building joints, their constituent parts and their design in building construction. Cancels and replaces the first edition (ISO 2444-1974), of which it constitutes a minor... | |
| Defines the distribution of the transportable mass and specifies a conventional average mass for passengers and a conventional mass for luggage. The total of the masses thus defined represents nominal... | |
| Definitions are given for certain of the terms concerning steel wire ropes. The classification system used is shown by the contents list, and an alphabetical index is provided for detailed... | |
| Definitions of relevant terms. Then are specified the preparation, general requirements, grade standards, sampling, methods of test, packing and marking. Recommendations relating to storage and disinfection are given in annexes... | |
| Dense shaped refractory products -- Determination of permanent change in dimensions on heating | |
| Describes different types of knots used in manufacturing hand-made carpets. A visual method for identification of types of knots is given. Applicable to most carpets in which knots are tied... | |
| Describes methods for household refrigerators used as a technical basis for the following: information labels, comparative tests, certification marks, etc. Not contained are specifications and rules for labelling, marking, sampling,... | |
| Describes the main factors affecting test sieving and the results obtained. Specifies general principles to be followed concerning apparatus, procedure and presentation of results. Applies to methods in which test... | |
| Determination of flash and fire points -- Cleveland open cup method | |
| Divides non-assembled strips into two quality grades that are identified by (+++) and (++) corresponding to the conditions specified in the tables. The regulations for manufacture, characteristics and delivery conditions... | |
| Drill chuck tapers | |
| Enables the international communication in information processing. Provides selected English and French terms and their definitions in the field of the links between the technical processes and the process computer... | |
| Establishes a simplified system for the transliteration. This simplification of the stringent rules established by ISO 233:1984 is especially intended to facilitate the processing of bibliographic information (e.g. catalogues, indices,... | |
| Establishes and specifies terms and definitions, in some cases completed by corresponding illustrations, for use in the field of preparation of warp for weaving. The terms are classified as follows:... | |
| Extension to - 5000 m and standard atmosphere as a function of altitude in feet | |
| Facilitates the international communication in information processing. Provides selected English and French terms and their definitions in the field of data media, storage devices as well as magnetic tapes and... | |
| Facilitates the international communication in information processing. Provides selected English and French terms and their definitions in the field of mathematics and logic. The terms relating to numeric values are... | |
| Files and rasps -- Part 2: Characteristics of cut | |
| Fineness can be considered as a vital characteristic of flax. However, because their special structure, the measurements of the fineness of such fibres presents a difficult problem. Two permeametric methods... | |
| Flexible and rigid cellular polymeric materials -- Accelerated ageing tests | |
| For the purpose of this standard the definitions in ISO 633 and the definition given herein apply. The tiles shall be tested as specified in ISO 354 taking into account... | |
| Fruit and vegetable products -- Determination of ethanol content | |
| Fruit and vegetable products -- Determination of tin content | |
| General principles on reliability for structures | |
| Geometrical Product Specifications (GPS) -- Series of angles and slopes on prisms | |
| Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 3: Specification operators | |
| Gives terms and definitions in English and French to facilitate understanding of the terminology relating to test sieves and test sieving. This second edition cancels and replaces the first edition... | |
| Gives the pressure and characteristics of nitrogen, compressed in oil-lubricated equipment. Is not intended to cover nitrogen für use in oxygen systems. The gaseous nitrogen supply pressure shall ensure charging... | |
| Gives the requirements of steel sealing wire. This wire is for use in aerospace assemblies and has the following purposes: the enable a check to be made as to whether... | |
| Green coffee -- Procedure for calibration of moisture meters -- Routine method | |
| Hand- and machine-operated circular screwing dies and hand-operated die stocks | |
| Hypsometrical tables | |
| In contrast to the previous edition (ISO 234-1975), this part of ISO 234 is limited to the most commonly used files and rasps. Does not apply to files and rasps... | |
| Information and documentation -- Information retrieval (Z39.50) -- Application service definition and protocol specification | |
| Information and documentation -- Transliteration of Arabic characters into Latin characters -- Part 3: Persian language -- Simplified transliteration | |
| Insoluble substances shall be defined by the conditions described in this document. The object is not to dissolve all the impurities but only those of interest to users. The method... | |
| Intelligent transport systems -- Communications access for land mobiles (CALM) -- ITS station management -- Part 1: Local management | |
| Intelligent transport systems -- Communications access for land mobiles (CALM) -- ITS station management -- Part 3: Service access points | |
| Intelligent transport systems -- Communications access for land mobiles (CALM) -- ITS station management -- Part 4: Station-internal management communications | |
| Intelligent transport systems -- Communications access for land mobiles (CALM) -- ITS station management -- Part 5: Fast service advertisement protocol (FSAP) | |
| Is intended to support international communication in information processing. Provides selected English and french terms and their definitions in the field of input and autput of data, transfer and conversion... | |
| Is one of a series of International Standards dealing with the conversion of systems of writing, following the principles of stringent conversion in order to permit international information exchange. Its... | |
| ISO 23278:2006 specifies acceptance levels for indications from imperfections in ferromagnetic steel welds detected by magnetic particle testing. The acceptance levels in ISO 23278:2006 are primarily intended for use during... | |
| ISO 23279:2010 specfies how to characterize embedded indications by classifying them as planar or non-planar. This procedure is also suitable for indications that break the surface after removal of the... | |
| ISO 2328:2011 specifies the dimensions of, and additional requirements for, fork carriers and hook-on type fork arms, to permit the interchangeability of these fork arms and/or other attachments, relative to... | |
| ISO 23297:2008 specifies requirements for eight classes and two types (construction with adhesive bond between layers and construction without adhesive bond between layers) of wire or synthetic yarn reinforced hydraulic... | |
| ISO 23309:2007 specifies the procedures for flushing from the hydraulic lines of larger hydraulic fluid power systems solid particulate contamination that can be introduced during the initial build of a... | |
| ISO 23317:2012 specifies a method for detecting apatite formed on a surface of a material in simulated body fluid (SBF). It is applicable to implant surfaces intended to come into... | |
| ISO 23328-1:2003 gives a short-term airborne sodium chloride particle challenge test method for assessing the filtration performance of breathing system filters (BSF) intended for the filtration of respired gases. ISO... | |
| ISO 23328-2:2002 specifies requirements for non-filtration aspects of breathing system filters (BSF) intended for anaesthetic and respiratory use, and addresses connection ports, leakage, resistance to flow, packaging, marking and information... | |
| ISO 2332:2009 specifies the clearance zone to be maintained around an implement for attachment to the three-point linkage of an agricultural wheeled tractor. It is applicable to the connection of... | |
| ISO 23337:2007 specifies a method for the determination of the resistance of rubber to abrasion using the Improved Lambourn test machine. The abrasion loss resulting from the slip caused by... | |
| ISO 23339:2010 gives requirements for estimating the mass of the remaining usable propellant of an unmanned spacecraft in low Earth orbit (LEO) or geostationary Earth orbit (GEO), and for designing... | |
| ISO 2336-2:2006 specifies the dimensions of machine hacksaw blades. It is applicable to single-edge blades of lengths from 300 mm up to 700 mm, the tooth pitch of which is... | |
| ISO 23380:2008 provides guidance on the selection of methods used for the determination of trace elements in coal and coal ash. The trace elements of environmental interest include arsenic, beryllium,... | |
| ISO 23391:2006 specifies requirements and test methods for dried rosehips obtained from the fruits of the rosehips shrub (Rosa canina L.) destined for human consumption. | |
| ISO 23392:2006 specifies a method for the determination of the alcohol-insoluble solids content of fresh or quick-frozen peas and maize, as well as whole kernel maize. | |
| ISO 23393:2006 specifies requirements and test methods for pomegranate fruit of the tree Punica granatum (L.) destined for human consumption. | |
| ISO 23394:2006 specifies requirements and test methods for dried oleaster obtained from the fruits of the tree Eleagnus angustifolia L. destined for human consumption. | |
| ISO 23409:2011 specifies the minimum requirements and the test methods applicable to male condoms produced from synthetic materials or blends of synthetic materials and natural rubber latex which are used... | |
| ISO 23429:2004 specifies gauges for hexagon sockets with tolerances as specified in ISO 4759-1. | |
| ISO 2342:2003 specifies the characteristics of slotted headless screws with shank with threads from M1 up to and including M10. | |
| ISO 23460:2011 presents the requirements for a dependability (reliability, availability and maintainability) assurance programme for space projects. ISO 23460:2011 defines the dependability requirements for space products as well as for... | |
| ISO 23461:2010 specifies a control system for non-conformances related to any product for space systems, such as electrical, electronic, and electromechanical components and software, as well as operational non-conformances and... | |
| ISO 23469:2005 provides guidelines for specifying seismic actions for designing geotechnical works, including buried structures (e.g. buried tunnels, box culverts, pipelines, and underground storage facilities), foundations (e.g. shallow and deep... | |
| ISO 23470:2007 specifies a method for the determination of the cation exchange capacity (CEC) and the content of exchangeable cations (Al3+, Ca2+, Fe2+, K... | |
| ISO 23480:2013 specifies the main dimensions and tolerances of sliding plates, to be used in press tools (an application example is shown). It also specifies the designation of sliding plates. | |
| ISO 23481:2008 specifies the main dimensions and tolerances of plates to be used for cam drivers and slides in tools for pressing. It also specifies the designation of cam driver... | |
| ISO 23499:2013 provides description of a cone procedure for determining an uncompacted bulk density of crushed coal less than 37 mm in size, such as is charged into coke ovens. | |
| ISO 23500:2011 provides dialysis practitioners with guidance on the preparation of dialysis fluid for haemodialysis and related therapies and substitution fluid for use in online therapies, such as haemodiafiltration and... | |
| ISO 23509:2006 specifies the geometry of bevel gears. The term bevel gears is used to mean straight, spiral, zerol bevel and hypoid gear designs. If the text pertains to one... | |
| ISO 2351-1:2007 prescribes the technical specifications for machine-operated screwdriver bits for slotted head screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined... | |
| ISO 2351-2 prescribes the technical specifications for machine-operated screwdriver bits for cross-recessed head screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined... | |
| ISO 2351-3 prescribes the technical specifications for machine-operated screwdriver bits for hexagon socket screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined... | |
| ISO 23519:2010 specifies a method to determine the surface roughness of sintered parts of metal materials. It also establishes principles for the use of the suitable parameters for measurement. | |
| ISO 23529:2010 specifies general procedures for the preparation, measurement, marking, storage, and conditioning of rubber test pieces for use in physical tests specified in other International Standards, and the preferred... | |
| ISO 23539:2005 specifies the characteristics of the system of physical photometry established by the CIE and accepted as the basis for the measurement of light. It defines the photometric quantities,... | |
| ISO 23550:2011 specifies safety, constructional and performance requirements and testing of safety control or regulating devices and sub-assemblies or fittings for burners and gas-burning appliances using such fuel gases as... | |
| ISO 23551-1:2012 specifies safety, constructional and performance requirements and testing of automatic and semi-automatic shut-off valves for gas burners, gas appliances and appliances of similar use. It applies to normally... | |
| ISO 23551-2:2006 specifies safety, constructional and performance requirements for pressure regulators intended for use with gas burners and gas burning appliances. It also describes the test procedures for checking compliance... | |
| ISO 23551-3:2005 specifies the safety, construction and performance requirements for gas/air ratio controls, pneumatic type, for inlet pressures up to and including 50 kPa, of a nominal connection size up... | |
| ISO 23551-4:2005 specifies safety, constructional and performance requirements of valve-proving systems, hereafter referred to as VPS, intended for use with gas burners and gas-burning appliances. It also describes the test... | |
| ISO 23552-1:2007 specifies safety, construction and performance requirements for electronic fuel/air ratio control systems intended for use with gas or oil burners and gas or oil burning appliances. ISO 23552-1:2007... | |
| ISO 23553-1 specifies safety, constructional and performance requirements, and testing of safety shut-off devices, for liquid fuels. ISO 23553-1 covers type testing only. It applies to safety shut-off devices which:... | |
| ISO 23560:2008 specifies the general characteristics, requirements and methods of test for woven polypropylene (PP) sacks. It is applicable to woven PP sacks, having a capacity of 50 kg or... | |
| ISO 23570 specifies the interconnection of elements in the control system of machine tools and similar large pieces of industrial automation, including cable types, sizes and sheath colours, connector types... | |
| ISO 23570-1:2005 specifies the interconnection of elements in the control system of machine tools and similar large pieces of industrial automation. This specification includes cable types, sizes and sheath colours,... | |
| ISO 23570-2:2005 specifies the interconnection of elements in the control system of machine tools and similar large pieces of industrial automation. This specification includes cable types, sizes and sheath colours,... | |
| ISO 23584-1:2009 provides the basis for the preparation of a reference dictionary of standardized product properties for the area of optics and photonics, and for the provision of this reference... | |
| ISO 23584-2:2012, on the basis of the rules set forth in ISO 13584-42, ISO/IEC Guide 77-2 and IEC 61360-1, specifies a reference dictionary of standardized product properties for the area... | |
| ISO 236-2:2013 specifies the dimensions of long fluted machine reamers with Morse taper shanks. | |
| ISO 23600:2007 specifies requirements for acoustic and tactile signals for pedestrian traffic lights to assist in safe and independent mobility of persons with vision impairments and persons with vision and... | |
| ISO 23601:2009 establishes design principles for displayed escape plans that contain information relevant to fire safety, escape, evacuation and rescue of the facility's occupants. These plans may also be used... | |
| ISO 23606:2009 specifies various systems of symbolic notation and pattern design for knitted fabrics. The symbolic notations contained in ISO 23606:2009 do not necessarily constitute the only method of representation. | |
| ISO 2360:2003 describes a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic, electrically conductive (generally metallic) basis materials, using amplitude-sensitive eddy current instruments. The method described... | |
| ISO 23611-1:2006 specifies a method for sampling and handling earthworms from field soils as a prerequisite for using these animals as bioindicators (e.g. to assess the quality of a soil... | |
| ISO 23611-2:2006 specifies a method for sampling, extracting and preserving collembolans and mites from field soils as a prerequisite for using these animals as bio-indicators (e.g. to assess the quality... | |
| ISO 23611-3:2007 specifies a method for sampling, handling and extracting enchytraeids from terrestrial field soils as a prerequisite for using these animals as bioindicators (e.g. to assess the quality of... | |
| ISO 23611-4:2007 specifies a method for sampling and handling free-living nematodes from terrestrial field soils as a prerequisite for using them as bio-indicators (e.g. to assess the quality of a... | |
| ISO 23611-5:2011 specifies a method for sampling, extracting and preserving macro-invertebrates from soils, including the litter zone. The proposed method is a prerequisite for using these animals as bio-indicators (e.g. | |
| ISO 23631:2006 specifies a method for the determination of dalapon, trichloroacetic acid (TCA) and selected haloacetic acids in ground water and drinking water by gas chromatography (GC-ECD and/or GC-MS detection)... | |
| ISO 23640:2011 is applicable to the stability evaluation of in vitro diagnostic medical devices, including reagents, calibrators, control materials, diluents, buffers and reagent kits, hereinafter called IVD reagents. ISO 23640:2011... | |
| ISO 23671:2006 specifies the method for measuring relative wet grip braking performance index to a reference under loaded conditions for new tyres for use on passenger cars on a wet-paved... | |
| ISO 23711:2003 specifies requirements for materials used for moulded seals made of thermoplastic elastomers (TPEs) for joints in: thermoplastic piping systems for non-pressure waste water discharge (intermittent flow at up... | |
| ISO 23713:2005 specifies a method for determining fibre coarseness using polarized light. The method is applicable to all kinds of pulp that polarize light. However fibrous particles shorter than 0,2... | |
| ISO 23717:2006 specifies the composition, dimensions and mechanical properties of steel wire with a high mass fraction of carbon, generally brass coated, for reinforcing high-pressure hoses. It is applicable to... | |
| ISO 23718:2007 defines the terminology that is used in mechanical testing of metals and forms a common basis for standards and general use. | |
| ISO 23718:2007 specifies a procedure for the determination of the water retention value (WRV) of all kinds of pulp. | |
| ISO 23727:2009 provides for the interchangeability of attachments on wheeled loaders by establishing common dimensions and clearances for a coupler. It is applicable to wheeled loaders as defined in ISO... | |
| ISO 23733:2007 specifies a test method for the determination of the linear density of chenille yarns. | |
| ISO 23747:2007 specifies requirements for peak expiratory flow meters (PEFMs) intended for the assessment of pulmonary function in spontaneously breathing humans. ISO 23747:2007 covers all devices that measure peak expiratory... | |
| ISO 23753-1:2005 specifies a method for determining the dehydrogenase activity in soil using 2,3,5-triphenyltetra zolium chloride (TTC). It is not applicable for determining the dehydrogenase activity in the upper layers... | |
| ISO 23753-2:2005 specifies a method for determining soil dehydrogenase activity using 2-(4-iodophenyl)-3-( 4-nitrophenyl)-5-phe nyltetrazolium chloride (INT). As the INT reduction is less sensitive to O2, the method is... | |
| ISO 2376:2010 specifies test methods for the determination of the electric breakdown potential of anodic oxidation coatings on aluminium and its alloys, on flat or near-flat surfaces and on round... | |
| ISO 23794:2010 provides guidance on the determination of the abrasion resistance of vulcanized and thermoplastic rubbers. It covers both solid and loose abrasives. The guidelines given are intended to assist... | |
| ISO 2380-1:2004 specifies the shape/form, dimensions and designation of the tips of hand- and machine-operated screwdrivers for slotted-head screws. It also gives the technical specifications and test conditions for the... | |
| ISO 2380-2:2004 specifies the general requirements, lengths of blades and the marking of hand-operated screwdrivers for slotted-head screws as specified in ISO 4759-1. | |
| ISO 23811:2009 specifies a simple practical method for calculating the non-volatile matter by volume, NVV, of a coating material from the non-volatile-matter content, NV, the density of the... | |
| ISO 23812:2009 specifies a procedure for calibrating the depth scale in a shallow region, less than 50 nm deep, in SIMS depth profiling of silicon, using multiple delta-layer reference materials. | |
| ISO 23813:2007 specifies the minimum training needed to impart the requisite knowledge for a person appointed to control and manage the lifting operations of cranes. It is not applicable to... | |
| ISO 23814:2009 specifies the competency required for persons who carry out periodic and thorough inspections of cranes. It excludes the inspection and checks performed by crane operators and maintenance personnel. | |
| ISO 23815-1:2007 establishes required practices for the maintenance of cranes by owners/users. | |
| ISO 23828:2008 specifies the procedures for measuring the energy consumption of fuel cell passenger cars and light duty trucks which use compressed hydrogen and which are not externally chargeable. | |
| ISO 23830:2008 specifies a method for confirming the repeatability and constancy of the positive-ion relative-intensity scale of static secondary-ion mass spectrometers, for general analytical purposes. It is only applicable to... | |
| ISO 23833:2013 defines terms used in the practices of electron probe microanalysis (EPMA). It covers both general and specific concepts classified according to their hierarchy in a systematic order. ISO... | |
| ISO 23848-1:2009 specifies and standardizes the following characteristics for ball splines: - the shapes and dimensions; - the test methods; - the inspection; - the designation; - the marking. | |
| ISO 23848-2:2009 specifies the calculation method of basic dynamic load rating, basic static load rating and basic rating life prediction for the design and use of ball splines of type... | |
| ISO 23853:2004 specifies the minimum training to be given to trainee crane slingers and crane signallers to develop the basic slinging skills and to impart the requisite knowledge for competency... | |
| ISO 23868:2008 specifies test methods to determine the quality of data on recorded media and provides specifications enabling end-user organizations to monitor data quality and ongoing conformance with the error... | |
| ISO 23873:2010 describes a method for the measurement of the swelling of hard coal using a dilatometer. | |
| ISO 23874:2006 describes the performance requirements for analysis of treated natural gas of transmission or pipeline quality in sufficient detail so that the hydrocarbon dewpoint temperature can be calculated using... | |
| ISO 23893-1:2007 provides guidance on how to sample fish for determination of biochemical and physiological characteristics, such as the composition and enzyme activities of blood, liver, muscle and other tissues... | |
| ISO 23893-3:2013 specifies a method for measuring vitellogenin (Vtg) concentrations in a fish plasma sample employing an enzyme-linked immunosorbent assay (ELISA) method. It applies to fish that are sampled in... | |
| ISO 23907:2012 specifies requirements for single-use sharps containers intended to hold potentially hazardous sharps medical waste with or without sharps protection features, e.g. scalpel blades, trocars, hypodermic needles and syringes. | |
| ISO 23908:2011 gives requirements and test methods for evaluating the performance parameters of sharps injury protection features, whether active or passive in design, for medical devices containing (sharp) hypodermic needles... | |
| ISO 23909:2008 specifies a method for the preparation of laboratory samples from large samples. In accordance with ISO 11464 and ISO 14507, the following analyses are considered: determination of physico-chemical... | |
| ISO 23910:2007 specifies a method for determining the stitch tear resistance of leather. It can be used on all leathers, but is particularly suitable for leathers over 1,2 mm in... | |
| ISO 23913:2006 specifies flow injection analysis (FIA) and continuous flow analysis (CFA) methods for the determination of chromium(VI) in various types of water. The method applies to the following mass... | |
| ISO 23932:2009 provides general principles for a performance-based methodology for engineers to assess the level of fire safety for new or existing built environments. Fire safety is evaluated through an... | |
| ISO 23933:2006 specifies requirements for aramid reinforced lightweight polytetrafluoroethyl ene (PTFE) hose assemblies for use in aircraft hydraulic, oil and fuel systems at temperatures between -55 °C and 135 °C... | |
| ISO 23935:2006 specifies the requirements for tests which may be applied to all fluid system components located in zones designated as "fire zones" and built to satisfy the minimum level... | |
| ISO 23936 as a whole presents general principles and gives requirements and recommendations for the selection and qualification, and gives guidance for the quality assurance, of non-metallic materials for service... | |
| ISO 23936 describes general principles and gives requirements and recommendations for the selection and qualification of non-metallic materials for service in equipment used in oil and gas production environments, where... | |
| ISO 2393:2008 specifies the equipment and procedures for the preparation, mixing and vulcanization of rubber test mixes specified in the various International Standards for the evaluation of such test mixes. | |
| ISO 23953-1:2005 establishes a vocabulary of terms and definitions related to refrigerated display cabinets used for the sale and display of foodstuffs. It is not applicable to refrigerated vending machines... | |
| ISO 23953-2:2005 specifies requirements for the construction, characteristics and performance of refrigerated display cabinets used in the sale and display of foodstuffs. It specifies test conditions and methods for checking... | |
| ISO 23954:2010 specifies certain characteristics of the oil of lime expressed, Persian type (Citrus latifolia Tanaka) in order to facilitate assessment of its quality. | |
| ISO 2398:2006 specifies the requirements for three types, three classes and two categories of textile-reinforced rubber hose for compressed air, up to a maximum working pressure of 25 bar with... | |
| ISO 23993:2008 gives methods to calculate design thermal conductivities from declared thermal conductivities for the calculation of the thermal performance of building equipment and industrial installations. These methods are valid... | |
| ISO 23996:2007 describes two methods for determining the density of homogeneous resilient floor coverings and solid layers of other resilient floor coverings. | |
| ISO 23997:2007 describes a method for determining the mass per unit area of a resilient floor covering. | |
| ISO 23999:2008 specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets and tiles, in linear dimensions after exposure to heat. | |
| ISO 24011:2009 specifies the characteristics of plain and decorative linoleum, supplied as either tiles or rolls. To encourage the consumer to make an informed choice, ISO 24011:2009 includes a classification... | |
| ISO 24013:2006 specifies test methods for the determination of the optical phase retardation of optical components by polarized laser beams. | |
| ISO 24014-1:2007 provides the basis for the development of multi-operator/multi -service Interoperable public surface (including subways) transport Fare Management Systems (IFMSs) on a national and international level. ISO 24014-1:2007 is... | |
| ISO 24033:2009 specifies minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on pipes made of: polyethylene... | |
| ISO 24034:2010 specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical... | |
| ISO 2408:2004 specifies minimum requirements for the manufacture and testing of stranded steel wire ropes for general purposes, including lifting equipment such as cranes and hoists. Ropes for slings are... | |
| ISO 24095:2009 gives guidelines for the quality assurance of measurements of respirable crystalline silica in air using direct on‑filter or indirect X‑ray diffraction and infrared analysis methods. The scope of... | |
| ISO 24097-1:2009 establishes a Service-Oriented Architecture (SOA) for the realization of interoperable Intelligent Transport Systems (ITS) web services (WS). Web service behaviour is described at the metadata level (i.e. a... | |
| ISO 24099:2011 defines the data structures and protocol(s) used in intelligent transport system (ITS) applications for the delivery and update of map-related data from Service Centre (SC) to users [(In-vehicle... | |
| ISO 24100:2010 states the basic rules to be observed by service providers who handle personal data in probe vehicle information services. This International Standard is aimed at protecting the personal... | |
| ISO 24101-1:2008 specifies structures and methods for application management, including means for installing, uninstalling and updating applications on on-board equipment (OBE) and wireless access equipment (WAE) deployed in a communications... | |
| ISO 24101-2:2010 specifies the test system, test cases, test conditions, test procedures and test results for examining the function of the communications access for land mobiles (CALM) application management (AM). | |
| ISO 24102:2010 provides specifications for intelligent transport systems (ITS) station management to be compliant with the ITS station reference architecture and the set of communications access for land mobiles (CALM)... | |
| ISO 24103:2009 determines the logical structure of using dedicated short-range communication (DSRC) with an OSI (open systems interconnection) application layer as a CALM medium for IP communications. DSRC to which... | |
| ISO 24113:2011 defines the primary space debris mitigation requirements applicable to all elements of unmanned systems launched into, or passing through, near-Earth space, including launch vehicle orbital stages, operating spacecraft... | |
| ISO 24114:2011 specifies criteria for authenticity of soluble (instant) coffee. | |
| ISO 24134:2006 specifies the safety requirements for controls and control systems for the following automated functions of industrial trucks: steering (excluding direct mechanical guidance); travel; lifting and lowering operations; load... | |
| ISO 24135-1:2006 specifies requirements and test methods for operator lap-type seat-belt assemblies and their associated mounting structure on industrial trucks. | |
| ISO 24153:2009 defines procedures for random sampling and randomization. Several methods are provided, including approaches based on mechanical devices, tables of random numbers, and portable computer algorithms. ISO 24153:2009 is... | |
| ISO 24157:2008 specifies standardized methods for reporting aberrations of the human eye. | |
| ISO 2415:2004 specifies the general characteristics of forged dee and bow shackles in a range of sizes having working load limits of from 0,32 t to 100 t and in... | |
| ISO 24173:2009 gives advice on how to generate reliable and reproducible crystallographic orientation measurements using electron backscatter diffraction (EBSD). It addresses the requirements for specimen preparation, instrument configuration, instrument calibration... | |
| ISO 2417:2002 specifies a method for determining the water absorption of leather under static conditions. The method is applicable to all leather, particularly heavy leather. | |
| ISO 2418:2002 specifies the location of a laboratory sample within a piece of leather and the method of labelling and marking the laboratory samples for future identification. It is applicable... | |
| ISO 2419:2012 specifies the preparation of leather for physical and mechanical testing together with standard atmospheres for conditioning and testing. It is applicable to all types of dry leather. | |
| ISO 2420:2002 specifies a method for determining the apparent density of leather. It is applicable to all heavy leather. | |
| ISO 24213:2008 specifies a method for evaluating the amount of springback of sheets of metallic materials known to exhibit large amounts of springback subjected to plane-strain stretch bending, which is... | |
| ISO 24214:2006 defines terms dealing with skin barriers for ostomy aids as defined below. ISO 24214:2006 does not cover medical terms or general adhesive terms. The terms do not individually... | |
| ISO 2421:2002 specifies dimensions, tolerances and test conditions for cylindrical abrasive sleeves mounted on holding fixtures for hand-held grinding machines in accordance with ISO 15637-1 and stationary grinding machines in... | |
| ISO 24233:2007 presents a tool specification sheet for diecasting dies, for use both when requesting (at the tendering stage) and when ordering the tools. The sheet specifies the data necessary... | |
| ISO 24234:2004 specifies the requirements and test methods for alloys and for mercury suitable for the preparation of dental amalgam, together with the requirements and test methods for that amalgam... | |
| ISO 24235:2007 specifies a laser diffraction method for measuring particle size distributions, by means of the detection of angular distributions of the intensity of light scattered by fine-ceramic raw powders... | |
| ISO 24236:2005 specifies a method for evaluating the constancy and repeatability of the intensity scale of Auger electron spectrometers, for general analytical purposes, using an electron gun with a beam... | |
| ISO 24237:2005 specifies a method for evaluating the repeatability and constancy of the intensity scale of X-ray photoelectron spectrometers, for general analytical purposes, using unmonochromated Al or Mg X-rays or... | |
| ISO 2424:2007 gives definitions of terms relating to textile floor coverings, and defines categories of these products. | |
| ISO 24254:2007 specifies the requirements of lubricating engine oils (hereinafter referred to as “four-stroke engine oils”) to be used in four-stroke cycle spark ignition gasoline engines employing a common sump... | |
| ISO 2425:2010 provides a summary of recommended methods for the determination of liquid flow in tidal channels, special consideration being given to those techniques that are either unique to or... | |
| ISO 24276:2006 specifies how to use the standards for sampling strategies (EN/TS 21568), nucleic acid extraction (ISO 21571), qualitative nucleic acid analysis (ISO 21569) and quantitative nucleic acid analysis (ISO... | |
| ISO 24293:2009 specifies a method for the determination of selected individual isomers of nonylphenol in non-filtered samples of drinking water, waste water, ground water and surface water. The method is... | |
| ISO 24314:2006 specifies qualities for seismic-purpose structural steels. This International Standard applies to steel plates with thicknesses of 6 mm or over and up to 125 mm, wide flats and... | |
| ISO 2431:2011 specifies a method for determining the flow time of paints, varnishes and related products that can be used to control consistency. Four flow cups of similar dimensions, but... | |
| ISO 24333:2009 specifies requirements for the dynamic or static sampling, by manual or mechanical means, of cereals and cereal products, for assessment of their quality and condition. It is applicable... | |
| ISO 24334:2006 specifies a method for the determination of the locking strength of joints between laminate floor covering panels, which are assembled with both vertical and horizontal mechanical locking systems. | |
| ISO 24335:2006 specifies how to determine the impact resistance of laminate floor covering elements. The test described measures the ability of the surface layer to withstand impact from both small... | |
| ISO 24336:2005 specifies a test method for the determination of thickness swelling of laminate floor-covering elements after partial immersion in water. The testing is destructive and is mainly intended to... | |
| ISO 24337:2006 gives test methods to determine the dimensional variance between elements of laminate floor coverings in a manufactured free-standing shape (unrestricted) in respect to thickness, length, width, squareness, straightness,... | |
| ISO 24338:2006 specifies a method for measuring abrasion of laminate floor covering elements. The test described measures the ability of the surface layer to resist abrasive wear-through. Abrasion is achieved... | |
| ISO 24339:2006 specifies a process to determine the capability of laminate and textile floor coverings to withstand exposure to moderate humid and dry climate conditions. The subclauses pertaining to flatness,... | |
| ISO 24340:2006 describes a method for determining the thickness of different layers of resilient floor coverings. | |
| ISO 24341:2005 specifies methods for determining the length, width and straightness of resilient or textile floor coverings in sheet form. | |
| ISO 24342:2007 describes methods for determining side lengths, straightness of edges and squareness of resilient or textile floor tiles. The side lengths, straightness and squareness of resilient or textile floor... | |
| ISO 24343-1:2007 describes a method for determining the residual indentation produced in a resilient or laminate floor covering after the application and removal of a constant load. | |
| ISO 24343-2:2011 describes a method for determining the short-term indentation and residual indentation produced in a resilient floor covering after the application and removal of a constant load. | |
| ISO 24343-3:2011 describes a method for determining the short-term indentation resistance of resilient semi-flexible/vinyl composition tile (VCT) floor covering after the application of constant load. | |
| ISO 24344:2008 specifies methods for determining the flexibility and deflection of resilient floor coverings. | |
| ISO 24345:2006 describes a method for determining the resistance against separation of two layers of a resilient floor covering by peeling. | |
| ISO 24346:2006 specifies a method for determining the overall thickness of resilient floor coverings. | |
| ISO 24347:2005 specifies the dimensions and location of a ball-type coupling device of 80 mm nominal diameter, whose male part fitted to an agricultural towing vehicle and female part fitted... | |
| ISO 24353:2008 specifies a test method for determining moisture adsorption/desorptio n properties of building materials in response to humidity variation. ISO 24353:2008 also defines the adsorption/desorptio n efficiency of building... | |
| ISO 24369:2005 specifies the procedure to determine the content of coarse particles in a fine ceramic powder and/or in a fine ceramic suspension using an aqueous-based wet sieving method. | |
| ISO 24370:2005 specifies a test method for determining the fracture toughness of monolithic ceramic materials at room temperature by the chevron-notched beam (CNB) method. ISO 24370:2005 is applicable to monolithic... | |
| ISO 24373:2008 specifies requirements for classification of solid wires and rods for fusion welding of copper and copper alloys. The classification of the solid wires and rods is based on... | |
| ISO 24393:2008 defines terms applied in the field of linear guidance systems, linear motion rolling bearings and their related subassemblies, parts, accessories, and technologies. | |
| ISO 24394:2008 specifies requirements for the qualification of welders and welding operators for the fusion welding of metallic materials for aerospace applications. | |
| ISO 24408:2005 specifies production tests and inspections, and marking requirements for position-indicating lights used in conjunction with various items of life-saving equipment, including survival craft interior lights. Specifically, it applies... | |
| ISO 24409-1:2010 prescribes general design principles for shipboard safety and safety-related signs, markings, and notices intended to communicate safety-related information to persons on board ships. | |
| ISO 24410:2005 provides for the interchangeability of attachments on skid steer loaders by establishing dimensional limits for the attachment interface. It is applicable to skid steer loaders whose operating mass... | |
| ISO 24415-1:2009 specifies requirements and test methods for the friction between the tips for assistive products for walking and the walking surface. The requirements and test method are based on... | |
| ISO 24415-2:2011 specifies requirements and test methods for the durability of tips for crutches. ISO 24415-2:2011 is not applicable to tips manufactured for special purposes e.g. walking on ice and... | |
| ISO 24431:2006 specifies the inspection requirements at the time of filling, and applies to seamless or welded transportable gas cylinders made of steel or aluminium alloy for liquefied or compressed... | |
| ISO 24442:2011 specifies an in vivo method for assessment of the UVA protection factor (UVAPF) of topical sunscreen products. It is applicable to cosmetics, drugs and other products intended to... | |
| ISO 24443:2012 specifies an in vitro procedure to characterize the UVA protection of sunscreen products. Specifications are given to enable determination of the spectral absorbance characteristics of UVA protection in... | |
| ISO 24444:2010 specifies a method for the in vivo determination of the sun protection factor (SPF) of sunscreen products. This International Standard is applicable to products that contain any component... | |
| ISO 24450:2005 specifies requirements and dimensions for an internationally acceptable series of conical flasks and of flat-bottom and round-bottom flasks with wide neck for general laboratory purpose. The flasks are... | |
| ISO 24453:2008 identifies specific test procedures for the acquisition and presentation of comparable single-point data for properties of rubber compounds. In general, each property is specified by a single test... | |
| ISO 24454:2008 identifies specific test procedures for the acquisition and presentation of comparable multi-point data for selected properties of rubber compounds. The data for each property are generated, using a... | |
| ISO 2446&brkbar;IDF 226:2008 specifies a routine method (the Gerber method) for the determination of the fat content of milk and includes guidance on the determination of the appropriate capacity of... | |
| ISO 24473:2008 specifies a series of test methods that simulate a real scale fire on a test object or group of objects under well-ventilated conditions. A range of different fire... | |
| ISO 24490:2005 specifies the minimum requirements for the design, manufacture and testing of pumps for cryogenic service. ISO 24490:2005 is applicable to centrifugal pumps. However the principles may be applied... | |
| ISO 24497-1:2007 specifies terms and definitions for procedures in the sphere of non-destructive testing by the method of metal magnetic memory. The terms specified in ISO 24497-1:2007 are mandatory for... | |
| ISO 24497-2:2007 specifies general requirements for the application of the method of metal magnetic memory of components, units, equipment, and structures for various application purposes. It covers non-destructive testing. | |
| ISO 24497-3:2007 specifies the general requirements for the application of the metal magnetic memory inspection method (MMM inspection) as a non-destructive testing method for quality assurance of welded joints of... | |
| ISO 24500:2010 specifies the auditory signals used as a means of feedback for operations or conditions of consumer products when used by a person with or without visual or auditory... | |
| ISO 24501:2010 specifies methods for determining the sound pressure level range of auditory signals so that the users of consumer products, including people with age-related hearing loss, can hear the... | |
| ISO 24502:2010 specifies the age-related luminance contrast of any two lights of different colour seen by a person at any age, by taking into account the age-related change of spectral... | |
| ISO 24503:2011 specifies requirements for the design of tactile dots and tactile bars for use on consumer products to improve accessibility for everyone, including older persons and persons with disabilities. | |
| ISO 2450|IDF 16:2008 specifies the reference method for the determination of the fat content of raw, processed and sour cream in which no appreciable separation or breakdown of fat, due... | |
| ISO 24510:2007 specifies the elements of drinking water and wastewater services of relevance and interest to users. It also provides guidance on how to identify users' needs and expectations and... | |
| ISO 24511:2007 provides guidelines for the management of wastewater utilities and for the assessment of wastewater services. ISO 24511:2007 is applicable to publicly and privately owned and operated wastewater utilities,... | |
| ISO 24512:2007 provides guidelines for the management of drinking water utilities and for the assessment of drinking water services. ISO 24512:2007 is applicable to publicly and privately owned and operated... | |
| ISO 24517-:2008 specifies the use of the Portable Document Format (PDF) Version 1.6 for the creation of documents used in engineering workflows. ISO 24517-:2008 does not define the following: method... | |
| ISO 24531:2013 assists ITS standards developers and users of ITS standards who wish to use XML, by providing a consistent definition of the rules and rule references for the use... | |
| ISO 24534 provides the requirements for an electronic registration identification (ERI) using symmetric encryption techniques that are based on an identifier assigned to a vehicle (e.g. for recognition by national... | |
| ISO 24534-1:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities), suitable to be used for:... | |
| ISO 24534-2:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:... | |
| ISO 24534-3:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:... | |
| ISO 24534-4:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:... | |
| ISO 24535:2007 supports simple systems for "basic electronic registration identification" ("basic ERI") for use in intelligent road transport applications. ISO 24535:2007 "basic ERI" defines the: specification of a unique vehicle... | |
| ISO 24537:2007 covers the essential dimensions of lightweight reels, made of plastic or metal, used for the storage and retrieval of processed 16 mm and 35 mm microfilm that is... | |
| ISO 24538:2008 specifies a method for the determination of residual vinyl chloride monomer in homopolymer and copolymer resins of vinyl chloride. The method is based on a static headspace gas-chromatographic... | |
| ISO 24557:2009 specifies a routine reference method for the determination of moisture content of pulses. The procedure is applicable to chickpeas, lentils, peas, and all classes of beans with the... | |
| ISO 24598:2012 specifies requirements for classification of solid wire electrodes, tubular cored electrodes and electrode/flux combinations (all-weld metal deposits) for submerged arc welding of creep resisting and low-alloy elevated-temperature steels. | |
| ISO 24610-1:2006 provides a format for the representation, storage and exchange of feature structures in natural language applications concerned with the annotation, production or analysis of linguistic data. It also... | |
| ISO 24610-2:2011 provides a format to represent, store or exchange feature structures in natural language applications, for both annotation and production of linguistic data. It is ultimately designed to provide... | |
| ISO 24611:2012 provides a framework for the representation of annotations of word-forms in texts; such annotations concern tokens, their relationship with lexical units, and their morpho-syntactic properties.It describes a metamodel... | |
| ISO 24612:2012 specifies a linguistic annotation framework (LAF) for representing linguistic annotations of language data such as corpora, speech signal and video. The framework includes an abstract data model and... | |
| ISO 24613:2008 describes the Lexical Markup Framework (LMF), a metamodel for representing data in lexical databases used with monolingual and multilingual computer applications. LMF provides mechanisms that allow the development... | |
| ISO 24614-1:2010 presents the basic concepts and general principles of word segmentation, and provides language-independent guidelines to enable written texts to be segmented, in a reliable and reproducible manner, into... | |
| ISO 24615:2010 describes the syntactic annotation framework (SynAF), a high level model for representing the syntactic annotation of linguistic data, with the objective of supporting interoperability across language resources or... | |
| ISO 24616:2012 provides a generic platform for modeling and managing multilingual information in various domains: localization, translation, multimedia annotation, document management, digital library support, and information or business modeling applications. | |
| ISO 24617-2:2012 provides a set of empirically and theoretically well-motivated concepts for dialogue annotation, a formal language for expressing dialogue annotations -- the dialogue act markup language (DiAML) -- and... | |
| ISO 24619:2011 specifies requirements for the persistent identifier (PID) framework and for using PIDs as references and citations of language resources in documents as well as in language resources themselves. | |
| ISO 24631-1:2009 provides the means of evaluating the conformance with ISO 11784 and ISO 11785 of RFID (radiofrequency identification) transponders used in the individual identification of animals. It sets forth... | |
| ISO 24631-2:2009 provides the means of evaluating the conformance with ISO 11784 and ISO 11785 of RFID (radiofrequency identification) transceivers used in the individual identification of animals. It also specifies... | |
| ISO 24631-3:2009 provides the means of evaluating the performance of ISO 11784- and ISO 11785‑conformant RFID (radiofrequency identification) transponders used in the individual identification of animals. | |
| ISO 24631-4:2009 provides the means of evaluating the performance of ISO 11784- and ISO 11785‑conformant RFID (radiofrequency identification) transceivers used in the individual identification of animals. | |
| ISO 24631-6:2011 specifies the representation of the animal identification information specified in ISO 11784 and ISO 11785 on a transceiver display and its communication from transceivers to systems in which... | |
| ISO 24631-7:2012 specifies rules and procedures for synchronizing RFID transceivers while reading transponders used in individual animal identification complying to ISO 11784 and ISO 11785. The synchronization scheme described herein... | |
| ISO 24637:2009 provides specific requirements for the content of equipment-level electromagnetic interference (EMI) test report documentation to ensure that sufficient data is provided for subsequent integration analysis of complex space... | |
| ISO 24638:2008 establishes the baseline requirements for the design, fabrication and testing of space flight pressure components. It also establishes the requirements for assembly, installation, test, inspection, operation and maintenance... | |
| ISO 2467:2004 specifies, for 65 mm/5 perforation motion-picture cameras and projectors, the dimensions of the image area produced by the camera on the film and the maximum projectable image area... | |
| ISO 24698-1:2008 specifies a method for the determination of the bound acrylonitrile content in NBR by an automatic analyser which uses a combustion process. The method is also applicable to... | |
| ISO 24698-2:2008 specifies a method for the determination of the bound acrylonitrile content in NBR by an automatic analyser which uses the Kjeldahl method. | |
| ISO 2469:2007 describes the general procedure for measuring the diffuse radiance factor of all types of pulp, paper and board. More particularly, it specifies in detail in Annex A the... | |
| ISO 246:2007 specifies the width, the maximum outside diameter, the bore and the bore minimum chamfer of separate thrust collars for cylindrical roller bearings in diameter series 0, 2, 3,... | |
| ISO 2470-1:2009 specifies a method for measuring the diffuse blue reflectance factor (ISO brightness) of pulps, papers and boards. ISO 2470-1:2009 is limited in its scope to white and near-white... | |
| ISO 2470-2:2008 specifies a method for measuring the D65 brightness of pulps, papers and boards. ISO 2470-2:2008 is limited in its scope to white and near-white pulps, papers and boards,... | |
| ISO 2471:2008 specifies a method for the determination of the opacity (paper backing) of paper by diffuse reflectance. It can be used to determine the opacity of papers or boards... | |
| ISO 2475:2011 specifies, for general-purpose chloroprene rubbers (CRs): physical and chemical tests on raw rubbers; standard materials, standard test formulations, equipment and processing methods for evaluating the vulcanization characteristics. | |
| ISO 2476:2009 specifies: physical and chemical tests on raw rubbers; standard materials, standard test formulations, equipment and processing methods for evaluating the vulcanization characteristics of solution-polymerized butadiene rubbers (BR), including... | |
| ISO 2477:2005 describes a method for determining the permanent change in dimensions on heating of a shaped insulating refractory product. | |
| ISO 247:2006 specifies two methods for the determination of ash from raw rubbers, compounded rubbers and vulcanizates. The methods are applicable to raw, compounded or vulcanized rubbers of the M,... | |
| ISO 248-1:2011 specifies two methods for the determination of volatile-matter content in raw rubbers by using a hot mill or an oven. The methods are applicable to the determination of... | |
| ISO 24801-1:2007 specifies the competencies that a scuba diver has to have achieved in order for a training organization to award the scuba diver certification indicating that he has met... | |
| ISO 24801-2:2007 specifies the competencies that a scuba diver has to have achieved in order for a training organization to award the scuba diver certification indicating that he has met... | |
| ISO 24801-3:2007 specifies the competencies that a scuba diver has to have achieved in order for a training organization to award the scuba diver certification indicating that he has met... | |
| ISO 24802-1:2007 specifies the competencies that a scuba instructor has to have achieved in order for a training organization to award the scuba instructor certification indicating that he has met... | |
| ISO 24802-2:2007 specifies the competencies that a scuba instructor has to have achieved in order for a training organization to award the scuba instructor certification indicating that he has met... | |
| ISO 24803:2007 specifies requirements for service providers in the field of recreational scuba diving. It specifies three areas of service provision: training and education, organized and guided diving for certified... | |
| ISO 2490:2007 specifies the nominal dimensions of general-purpose single-start solid (monobloc) gear hobs with axial keyway or tenon drive of 0,5 to 40 module. These hobs are intended for the... | |
| ISO 24917:2010 establishes general test requirements for launch vehicles equipped with liquid-propellant engines, launched from stationary ground-, sea- and air-based launchers, in all phases of their development. | |
| ISO 2493-1:2010 specifies procedures, based on the two-point loading principle, for determining the bending resistance of paper and board. ISO 2493-1:2010 applies to the measurement of the bending resistance within... | |
| ISO 2493-2:2011 specifies procedures to measure the bending resistance of paper and paperboard. ISO 2493-2:2011 is used to determine the bending moment required to deflect the free end of a... | |
| ISO 2496:2006 specifies the following four test methods for the determination of the hygroscopic moisture content of test samples: Method 1 -- Gravimetric method; Method 2 -- Karl Fischer volumetric... | |
| ISO 24978:2009 deals with intelligent transport systems. ISO 24978:2009 provides a standardized set of protocols, parameters, and a method of management of an updateable "Data Registry" to provide application layers... | |
| ISO 24998:2008 specifies requirements and test methods for plain, single-use Petri dishes for microbiological use. ISO 24998:2008 does not apply to products of similar design which may be used for... | |
| ISO 24999:2008 specifies a method for determining the loss in thickness of flexible cellular materials when compressed repetitively to a fixed level of strain. It is particularly useful for quality... | |
| ISO 2503:2009 specifies requirements for single or two-stage pressure regulators without flow-metering devices for connection to gas cylinders used for compressed gases up to 300 bar (30 MPa), dissolved acetylene,... | |
| ISO 2505:2005 specifies a method for determining the longitudinal reversion of thermoplastics pipes, to be carried out in either a liquid or in air. In case of dispute, heated liquid... | |
| ISO 25101:2009 specifies a method for the determination of the linear isomers of perfluorooctanesulfo nate (PFOS) and perfluorooctanoate (PFOA) in unfiltered samples of drinking water, ground water and surface water... | |
| ISO 25111:2009 specifies general requirements for the provision of ITS services, using the CALM architecture and protocols, via the use of public wireless networks [including cellular telephony and mobile wireless... | |
| ISO 25112:2010 selects the options appropriate for CALM using mobile wireless broadband (MWB) techniques conforming to IEEE 802.16, and specifies the management interface requirements. CALM links are required for quasi-continuous,... | |
| ISO 25113:2010 selects the options appropriate for CALM using mobile wireless broadband (MWB) techniques conforming to ATIS 0700004-2005 (HC-SDMA) air interface and protocol specification recommended by ITU-R M.1801 and specifies... | |
| ISO 25119-1:2010 sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry, and on self-propelled ride-on machines... | |
| ISO 25119-2:2010 specifies the concept phase of the development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry, and on self-propelled ride-on machines and mounted,... | |
| ISO 25119-3:2010 provides general principles for the series development, hardware and software of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry, and on self-propelled ride-on... | |
| ISO 25119-4:2010 provides general principles for the production, operation, modification and supporting processes of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry, and on self-propelled... | |
| ISO 25137-1:2009 establishes a system of designation for sulfone polymer moulding and extrusion materials, including polysulfone (PSU), polyethersulfone (PESU) and polyphenylsulfone (PPSU), which may be used as the basis for... | |
| ISO 25137-2:2009 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of sulfone polymer moulding and extrusion materials. Requirements for... | |
| ISO 25139:2011 specifies a manual method for the determination of the concentration of methane emissions from stationary sources. ISO 25139:2011 specifies an independent method of measurement, which is validated for... | |
| ISO 25140:2010 specifies the principle, the essential performance criteria, and quality assurance and quality control procedures for an automatic method for measuring methane in the waste gas of stationary sources... | |
| ISO 25157:2013 specifies certain characteristics of the essential oil of rose, Chinese Kushui type (Rosa sertata × Rosa rugosa) cultivated mainly in China, in order to facilitate assessment of... | |
| ISO 25177:2008 is a guide for describing the soil and its environmental context at a given site. Sites can be natural, near-natural, urban or industrial. It is important to realize... | |
| ISO 25178-2:2012 specifies terms, definitions and parameters for the determination of surface texture by areal methods. | |
| ISO 25178-601:2010 defines the metrological characteristics of contact (stylus) areal surface texture measuring instruments. | |
| ISO 25178-602:2010 specifies the design and metrological characteristics of a particular non-contact instrument for measuring surface texture using a confocal chromatic probe based on axial chromatic dispersion of white light. | |
| ISO 25178-604:2013 specifies the metrological characteristics of coherence scanning interferometry (CSI) systems for 3D mapping of surface height. | |
| ISO 25178-6:2010 describes a classification system for methods used primarily for the measurement of surface texture. It defines three classes of methods, illustrates the relationships between the classes, and briefly... | |
| ISO 25178-701:2010 specifies the characteristics of material measures used as measurement standards, the estimation methods of the residual errors, and the calibration methods and tests for acceptance and periodical re-verification... | |
| ISO 25178-71:2012 defines Type S1 and Type S2 software measurement standards (etalons) for verifying the software of measuring instruments. It also defines the file format of Type S1 software measurement... | |
| ISO 25179:2010 specifies a test method for the determination of the solubility of a water-soluble pressure-sensitive adhesive in water or the solubility of an alkali-soluble pressure-sensitive adhesive in alkali by... | |
| ISO 25197:2012 establishes the requirements for design, construction and testing of electrical/electroni c steering, shift and throttle and dynamic position control systems, or combinations thereof, on small craft of up... | |
| ISO 25217:2009 specifies a method, based upon linear elastic fracture mechanics (LEFM), for the determination of the fracture resistance of structural adhesive joints under an applied mode I opening load,... | |
| ISO 25239-1:2011 defines friction stir welding terms. In ISO 25239-1:2011, the term "aluminium" refers to aluminium and its alloys. | |
| ISO 25239-2:2011 specifies design requirements for friction stir weld joints. In ISO 25239-2:2011, the term "aluminium" refers to aluminium and its alloys. ISO 25239-2:2011 does not apply to friction stir... | |
| ISO 25239-4:2011 specifies the requirements for the specification and qualification of welding procedures for the friction stir welding (FSW) of aluminium. In ISO 25239-4:2011, the term "aluminium" refers to aluminium... | |
| ISO 25239-5:2011 specifies a method for determining the capability of a manufacturer to use the friction stir welding (FSW) process for production of products of the specified quality. It specifies... | |
| ISO 25239:2011 specifies requirements for the qualification of welding operators for the friction stir welding (FSW) of aluminium. In ISO 25239:2011, the term "aluminium" refers to aluminium and its alloys. | |
| ISO 25297-2:2011 specifies the relationship between the terms used in ISO 25297-1 and the properties defined in ISO 23584-2 and provides the means to facilitate the use of both standards. | |
| ISO 252:2007 specifies two test methods, A and B, for determining the adhesion strength between constitutive elements of a conveyor belt, i.e. between plies and between covers and carcass. Basic... | |
| ISO 2531:2009 specifies the requirements and test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines: - to convey water (e.g. for human... | |
| ISO 25337:2010 describes a statistical, so-called single-measurement, model for using single measurements for production quality control purposes at a producer's manufacturing site, even if a standard test method specifies replicate... | |
| ISO 25378:2011 defines general terms for geometrical specifications, characteristics and conditions. These definitions are based on concepts developed in ISO 17450-1 and ISO 22432 and they are given by using... | |
| ISO 2537:2007 specifies the operational requirements, construction, calibration, and maintenance of rotating-element devices for the measurement of flow velocities in open channels. | |
| ISO 25424:2009 specifies requirements for the development, validation and routine control of a Low Temperature Steam and Formaldehyde (LTSF) sterilization process for medical devices. ISO 25424:2009 is intended to be... | |
| ISO 25457:2008 specifies requirements and provides guidance for the selection, design, specification, operation and maintenance of flares and related combustion and mechanical components used in pressure relieving and vapour-depressurizin g... | |
| ISO 25498:2010 specifies the method of selected-area electron diffraction (SAED) analysis using a transmission electron microscope (TEM) to analyse micrometer and sub-micrometer sized areas of thin crystalline specimens. Such specimens... | |
| ISO 25518:2009 specifies the physical requirements and methods of sampling and testing for single-use rubber gloves, made from natural rubber latex, synthetic rubber latex or rubber solution, intended for general... | |
| ISO 25537:2008 specifies the minimum quality requirements (regarding optical, visual and edge faults) and durability tests for silvered float glass for internal use in buildings. ISO 25537:2008 applies only to... | |
| ISO 25539-1:2003 specifies requirements for endovascular prostheses, based upon current medical knowledge. With regard to safety, it gives requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization packaging... | |
| ISO 25539-3:2011 specifies requirements for vena cava filters, based upon current medical knowledge. With regard to safety, it gives requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization,... | |
| ISO 2553:1992 prescribes the rules to be applied for the symbolic representation of welded, brazed and soldered joints on drawings. | |
| ISO 25577:2008 specifies the requirements for a generalized XML-based exchange format for bibliographic records as well as other types of metadata. ISO 25577:2008 does not define the length or the... | |
| ISO 2558:2010 specifies a method of determining the time taken for a tensile load to break the bond between the strands of a textile glass chopped-strand mat, used for the... | |
| ISO 25597:2013 specifies procedures for the extraction and measurement of filterable particulate matter from stationary source flue gas samples by: a) the use of cyclone samplers; b) the measurement of... | |
| ISO 2559:2011 provides a basis for specifications which is applicable only to textile glass mats that are made from chopped or continuous strands bonded together by chemical or mechanical means... | |
| ISO 2560:2009 specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of non-alloy and... | |
| ISO 25619-1:2008 specifies index test methods for determining the compressive creep properties of geosynthetic products. The test specimens are subjected either to normal compressive loading or to a combination of... | |
| ISO 25619-2:2008 specifies an index test method for determining the short-term compressive behaviour of geosynthetics. It can be used to determine the deformation behaviour under short-term compressive stress, e.g. after... | |
| ISO 2561:2012 specifies a method for the determination of the residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography. It may also be used for the... | |
| ISO 25620:2008 specifies a method for the determination of the long-side friction of joints between laminate floor panels which are held together on the floor by mechanical locking systems. | |
| ISO 25639-1:2008 specifies terms and definitions that are commonly used in the exhibition industry. They are grouped into the following four categories: individual and entity, which lists and classifies the... | |
| ISO 25639-2:2008 establishes standard measurement procedures applicable to terms commonly used in the exhibition industry, as defined in ISO 25639-1. ISO 25639-2:2008 is intended for integral use with ISO 25639-1. | |
| ISO 2563:2009 gives the profile dimensions of V-band couplings, and the associated inch-based aircraft ducting and piping for the following external flange profiles: lightweight solid profile; medium-weight solid profile; heavyweight... | |
| ISO 25720:2009 is applicable to the data exchange format that is designed to facilitate the exchange of the genomic sequence variation data around the world, without forcing change of any... | |
| ISO 25745-1:2012 specifies: a) methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis; b) methods of carrying out periodic energy verification checks... | |
| ISO 2575:2010 specifies symbols (i.e. conventional signs) for use on controls, indicators and tell-tales applying to passenger cars, light and heavy commercial vehicles and buses, to ensure identification and facilitate... | |
| ISO 25760:2009 is intended for suppliers, operators in testing facilities, operators performing cylinder maintenance and any person authorized to remove valves from gas cylinders. It details procedures for the safe... | |
| ISO 25762:2009 gives guidelines for the assessment of the fire characteristics and fire performance of fibre-reinforced polymer (FRP) composites, particularly in structural applications in buildings and transport. It is applicable... | |
| ISO 2577:2007 specifies a method of determining the moulding shrinkage and the shrinkage after heat treatment of moulded test specimens of thermosetting moulding materials. These characteristics are useful for the... | |
| ISO 25780:2011 specifies the properties of the piping system and its components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) for water supply, irrigation, drainage or... | |
| ISO 257:2004 gives principles for creating common names for pesticides and other agrochemicals. These principles are defined for the guidance of proposers of such common names. The procedure for the... | |
| ISO 2580-2:2003 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of ABS moulding and extrusion materials. Requirements for handling... | |
| ISO 25841:2011 specifies the minimum requirements and test methods for female condoms, which are supplied to consumers for contraceptive purposes assisting in the prevention of sexually transmitted infections. | |
| ISO 25861:2007 applies to daylight signalling lamps, which are required for certain ships pursuant to Chapter V of the International Convention for the Safety of Life at Sea (SOLAS), 1974,... | |
| ISO 25862:2009 gives requirements regarding construction and performance of marine magnetic compasses for navigation and steering purposes, binnacles and azimuth reading devices. According to the design of the ship, two... | |
| ISO 2589:2002 specifies a method for determining the thickness of leather. The method is applicable to all types of leather of any tannage. The measurement is valid for both the... | |
| ISO 25902-1:2009 specifies a method for the eddy-current examination for detecting flaws in titanium seamless tubes and welded tubes. Titanium tubes are now used as steam surface condensers in steam-power... | |
| ISO 25902-2:2010 specifies an ultrasonic testing method for detecting longitudinal imperfections in titanium seamless tubes or welded tubes. ISO 25902-2:2010 also applies to titanium alloy tubes. | |
| ISO 25964-1:2011 gives recommendations for the development and maintenance of thesauri intended for information retrieval applications. It is applicable to vocabularies used for retrieving information about all types of information... | |
| ISO 25964-2:2013 is applicable to thesauri and other types of vocabulary that are commonly used for information retrieval. It describes, compares and contrasts the elements and features of these vocabularies... | |
| ISO 2597-1:2006 specifies a titrimetric method for the determination of the total iron content of iron ores, using potassium dichromate after reduction of the trivalent iron by tin(II) chloride. The... | |
| ISO 2597-2:2008 specifies two titrimetric methods, free from mercury pollution, for the determination of total iron content in iron ores, using potassium dichromate as titrant after reduction of the iron(III)... | |
| ISO/CIE 23603:2005 specifies a method of assessing the spectral quality of the irradiance provided by a daylight simulator to be used for visual appraisal of colours or for colour measurements... | |
| ISO/TC 161 Control and protective devices for gas and/or oil burners and appliances | |
| ISO/TC 219 Floor coverings | |
| ISO/TC 44 Welding and allied processes | |
| Machine tools -- Test conditions for external cylindrical and universal grinding machines with a movable table -- Testing of accuracy | |
| Machine-made textile floor coverings -- Determination of dimensional changes due to the effects of varied water and heat conditions | |
| Metallic materials -- Verification of the alignment of fatigue testing machines | |
| Milk and liquid milk products -- Density hydrometers for use in products with a surface tension of approximately 45 mN/m | |
| Non-destructive testing -- Ultrasonic testing -- Specification for calibration block No. 1 | |
| Optics and photonics -- Electronic exchange of optical data -- Part 1: NODIF information model | |
| Outlines some basic principles for the design of joints in building. These principles fall under three main headings of properties: geometrical, structural and environmental properties of joints. | |
| Page 1, clause 3.1: delete the last sentence "If required, ... numbers"; clause 3.2: the existing text shall be replaced by "The dimensions laid down for the length of the... | |
| Paints and varnishes -- Cross-cut test | |
| Parallel pins, of unhardened steel and austenitic stainless steel | |
| Plastics -- Film and sheeting -- Guidance on the testing of thermoplastic films | |
| Plastics -- Unsaturated polyester resins -- Determination of hydroxyl value | |
| Plastics -- Unsaturated-polyeste r resins -- Measurement of gel time at ambient temperature | |
| Plywood -- Classification by surface appearance -- Part 1: General | |
| Plywood -- Classification by surface appearance -- Part 2: Hardwood | |
| Plywood -- Classification by surface appearance -- Part 3: Softwood | |
| Provides certain indications relating to the sampling and indicates the conditions under which the test sample should be prepared The special properties which make particular precautions essential such as hygroscopic... | |
| Reduction sleeves and extension sockets for tools with Morse taper shanks | |
| Refers to carbon steel and low alloy high tensile steel covered electrodes in the sizes 3,15 to 6,3 mm. For the practical use of ISO 2401, the precision of measurement... | |
| Relates to sub-clause 5.3 of the 1972 edition, in the third line of which a correction is made. In addition, the footnote is deleted. | |
| Requirements for marking and manufacturer's instructions concerning mercury | |
| Road vehicles -- Engine test code -- Gross power | |
| Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit | |
| Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method | |
| Rubber- or plastics-coated fabrics -- Determination of coating adhesion | |
| Serves for the international communication in information processing. Provides selected English and French terms and their definition in the field of concepts relating to analog and hybrid arithmetic units, function... | |
| Sets forth the recommended range of maximum capacities of cranes from 0,1 to 1000 t. Applies to all types of cranes. | |
| Sets out rules to ensure that translations are presented in a standard form which will simplify their use by different categories of user. Applies to the translation of all documents,... | |
| Shell end mills with plain bore and tenon drive -- Metric series | |
| Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers | |
| Soil quality -- Sampling of soil invertebrates -- Part 6: Guidance for the design of sampling programmes with soil invertebrates | |
| Specification of a method for determining an apparent viscosity of resins in a liquid state, using one of the types of rotational viskosimeter described in this standard. A spindle or... | |
| Specification of applying definitions, method of sampling and sampling report. Reference to ISO 3534. The method is applicable to all kinds of leather of any type of tannage. | |
| Specification of the methodand of two types of suitable test apparatus. The plastic test specimen separates two chambers, the one contains the test gas at atmospheric pressure, the other of... | |
| Specified are the locations and widths of magnetic stripes and gaps of magnetic recording and reproducing heads for six-track magnetic sound records on 70 mm release prints on safety film. | |
| Specifies a method for the determination of the conventional moisture content. The principle consists drying of a test portion in an oven at (110 +- 2) °C to constant mass. | |
| Specifies a method for the determination of the dirt content of raw natural rubber. Not applicable to dirt present as surface contamination. Replaces the second edition which has been technically... | |
| Specifies a method for the determination of the water vapour transmission rate of sheet materials. Not applicable to film materials that are damaged by hot wax or that shrink under... | |
| Specifies a method of converting room temperature percentage elongations after fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths. The conversions are not applicable to cold... | |
| Specifies a simplified system for the transliteration of Hebrew characters into Latin characters. This simplification of the stringent rules established by ISO 259:1984 is especially intended to make easier the... | |
| Specifies certain dimensions relating to the interchangeability of slide units used in special machines constructed from modular units. Gives furthermore the designation and numerical values of nominal sizes. | |
| Specifies the characteristics of products with metric dimensions and nominal diameters from 0,6 mm up to and including 50 mm; includes specifications with reference to International Standards; gives an example... | |
| Specifies the characteristics of products without (type A) and with split pin hole (type B) with metric dimensions and nominal diameters from 3 mm up to and including 100 mm; | |
| Specifies the characteristics of products without (type A) and with split pin holes (type B) with metric dimensions and nominal diameters from 3 mm up to and including 100 mm... | |
| Specifies the characteristics of the Atmosphere Type ISO which is applicable to planning under identical conditions, to test results end elements. Permits the unification in the range of tests and... | |
| Specifies the colours of indicator lights for installations on board of ships and on control panels and instruments. Does not apply to colours for navigation lamps. | |
| Specifies the dimensional characteristics of mobile and portable conveyors. | |
| Specifies the dimensions of hand hacksaw blades. It is valid for single edge blades of length equal to 300 mm, the tooth pitch of which is no greater than 1,4... | |
| Specifies the dimensions of simple cylindrical cutters and composite cutters, with straigth-sided teeth and with helical teeth. The range of outside diameters is taken from ISO 523. | |
| Specifies the dimensions of slotting cutters with straigth-sided teeth and with helical teeth. The range of outside diameters is taken from ISO 523. | |
| Specifies the dimensions of these side and face milling cutters intended for fitting to the ends of cutter arbors. Applies to cutters, with straigth-sided teeth and with double helical teeth. | |
| Specifies the methods of checking the regularity of the grooves and pulleys for V-belts. The grooved pulleys may be designed for use with classical or narrow V-belts. The groove details... | |
| Specifies the numbering and the dimensions for the two types of card gauges currently used to set the distance between the working elements of cards. Dimensions of gauges, typ A... | |
| Specifies the particular test conditions for determining the Vicat softening temperature of ABS and ASA pipes and fittings (the general test method is given in ISO 2507-1). Also gives, for... | |
| Specifies the particular test conditions for determining the Vicat softening temperature of PVC-U and PVC-C pipes and fittings as well as PVC-HI pipes (the general test method is given in... | |
| Specifies the position of the emulsion, the frame rate of exposure, and the orientation of the emulsion area being exposed for 16 mm silent and sound motion-picture film perforated along... | |
| Specifies the pressure and characteristics of air, compressed in oil-lubricated equipment. Is not intended to cover air for breathing purposes or air for use in oxygen systems. The compressed air... | |
| Specifies the principles and procedures for evaluating the thermal endurance properties of plastics exposed to elevated temperature for long periods. The study of the thermal ageing is based solely on... | |
| Specifies the rest procedures suitable for establishing the compliance of wires with the performance requirements stated in ISO 3032. They are intended for use as a basis for specifying tests... | |
| Specifies the sampling method (elementary sampling, gross sample, reduced sample, laboratory samples) in detail and the sampling report. | |
| Specifies the way in which single-core, multi-core and coaxial cables used in the wiring of aircraft are to be marked as to type, size, origin, date etc. in order to... | |
| Supports the international communication in information processing. Provides selected English and French terms and their definitions in the field of circuits and signals, modes of operation and processing and also... | |
| Supports the international communication in information processing. Provides selected English and French terms and their definitions in the main fields of data processing including the used basic processes and device... | |
| TC 22 Road vehicles // SC 13 | |
| TC 34 Food products // SC 16 | |
| TC 5 Ferrous metal pipes and metallic fittings // SC 2 | |
| TC 86 Refrigeration and air-conditioning // SC 7 | |
| Temporal information in natural language texts is an increasingly important component to the understanding of those texts. ISO 24617-1:2012, SemAF-Time, specifies a formalized XML-based markup language called ISO-TimeML, with... | |
| Test conditions for internal cylindrical grinding machines with horizontal spindle -- Testing of accuracy | |
| Test methods | |
| The basic concepts and general principles of word segmentation as defined in ISO 24614-1 apply to Chinese, Japanese and Korean. Text needs to be segmented into tokens, words, phrases or... | |
| The following requirements are specified: residue after evaporation, electrical conductivity, oxidizable matter expressed in oxygen content, absorbance at 254 nm and 1 cm cell optical path length: 0.01 units max.,... | |
| The indentation hardness of flexible cellular materials is a measure of their load-bearing properties. ISO 2439:2008 specifies four methods (A to D) for the determination of indentation hardness and one... | |
| The method can be applied provided the Fe203 content does not exceed 0,15 . It can also be applied to products with molar ratio of NaF to AlF3 between approximately... | |
| The method is applicable to alloys having insoluble zirconium contents between 0,02 and 0,3 %. Rare earths, thorium and silver do not interfere. Specifies principle and procedure of the method,... | |
| The method is applicable to copper and all copper alloys, bronzes, brasses, copper-nickels and copper-aluminiums having manganese contents equal to or less than 6 %, which can be attacked under... | |
| The method is applicable to products having a content equal to or greater than 0,1 mg/kg. The principle concists in reduction of the iron(III) by hydroxylammoniumchlo ride. Formation of a... | |
| The method is applicable to products with a content greater than 0,01 % (m/m). It is not applicable to the analysis of mixtures of products such as herbicides and insecticides. | |
| The method is applicable to the analysis of products with a content greater than 0,01 % (m/m). The method is not applicable to mixtures based on sodium chlorate, such as... | |
| The method is applicable to the determination of contents of rare earths between 0,2 and 10 %, in the absence of thorium. Specifies principle and procedure of the method, reagents,... | |
| The method is applicable to the determination of manganese contents between 0,002 and 0,2 % (m/m). Specifies principle and procedure of the method, reagents, apparatus, sampling, expression of results and... | |
| The method is applicable to water soluble sulphate, in the product, but also to sulphates in a principal solution prepared in an acid medium. The principle consists in dissolution of... | |
| The method is applicable to water-soluble salts for contents greater than 0,001 % (m/m). In a special case, the determination of ions in a principal solution prepared in an acid... | |
| The method is applivable to products with a content greater than 0,02% (m/m). It is not applicable to the analysis of mixtures such as herbicides and insecticides. The principle is... | |
| The method specified in ISO 25761:2008 measures the basic constituents in polyols that are soluble in glacial acetic acid and reactive with perchloric acid. Samples containing 0,3 % to 10... | |
| The method specified is based on determining the temperature at which a standard indenter, under a force of 50 N ± 1 N, penetrates 1 mm into the surface of... | |
| The methods are applicable as alternatives to products for which the molar ratio NaF/AlF3 is equal to about 3. The principle of the flame emission method consists in atomization of... | |
| The principle of the analysis consists in titration of the halogen ions with mercury(II) nitrate in the presence of diphenylcarbazone as indicator. The main solution for the determination is prepared... | |
| The standard specifies the dimensions and method of production of reference test bars for aluminium alloy sand castings. The figure shows the dimensions, in millimetres and in inches, of the... | |
| The standard specifies the dimensions and method of production of reference test bars for magnesium alloy sand castings. A figure shows shape and dimensions of a mould pattern which allows... | |
| The standard specifies the dimensions of a mould to be used for the production of reference test bars for aluminium alloy chill castings. The mould is having the dimensions shown... | |
| This International Standard specifies manufacturing, testing, and marking requirements for solid-section fork arms, for quantity production and with all types of mounting. These include but are not limited to, hook,... | |
| This part of ISO 236 specifies the dimensions of hand reamers. It comprises three tables giving respectively the preferred sizes with corresponding dimensions in millimetres and in inches, the corresponding... | |
| This secon edition, which superseded ISO 235-1:1975, incorporates draft Amendment 1. ISO 235 specifies in dimensions of the above mentioned drills. It comprises, for each type of these drills, three... | |
| This second edition cancels and replaces the first edition (i. e. ISO 2361:1972). Specifies the method of using coating thickness instruments of the magnetic type ror non-destructive measurements of the... | |
| This second edition cancels and replaces the first edition (i. e. ISO 2423 : 1974). Describes both geometrical and pratical tests on these general purpose and normal accurasy radial drilling... | |
| Turning tools with carbide tips -- External tools | |
| Two methods are defined and the symbols specified as shown in the figures. The direct orthogonal projection is symbolized by two parallel arrows running vertically to a dash-and-dot line, and... |
| << Prev | Next >> |