ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| ISO 17665-1:2006 specifies requirements for the development, validation and routine control of a moist heat sterilization process for medical devices. Moist heat sterilization processes covered by ISO 17665-1:2006 include... | |
| 17613-1:2006 gives recommendations for the selection and acceptance of manually operated pumps suitable for lifting water, free of sand and/or suspended particles, from shallow and deep borewells situated in Southeast... | |
| A single conventional value is specified and it is stated how the indication of hydrometer having a thermal cubic expansion coefficient value may be corrected for use in measurement tables... | |
| A system of color coding is specified for one-mark pipettes for identification of nominal capacities, and for graduated pipettes for identification of nominal capacities and unit of subdivision. The color... | |
| Acoustics -- Sound-scattering properties of surfaces -- Part 2: Measurement of the directional diffusion coefficient in a free field | |
| Agricultural trailers -- Balanced and semi-mounted trailers -- Determination of payload, vertical static load and axle load | |
| Applicable to carpets the pile of which consists of uniformly spaced tufts and/or loops. Tufts and loops are defined, and the procedure of determination is specified. - Replaces the first... | |
| Applies to dictation machines, transcription machines and to combined dictation and transcription machines. Serves to define role of these machines and to describe elements to ensure their effective operation and... | |
| Aromatic extracts, flavouring and perfuming compounds -- Determination of ethanol content -- Gas chromatographic method on packed and capillary columns | |
| Belt drives -- V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts -- Electrical conductivity of antistatic belts: Characteristics and methods of test | |
| Building construction -- Tolerances -- Expression of dimensional accuracy -- Principles and terminology | |
| Cinematography -- Camera usage of 8 mm Type S motion-picture film -- Specifications | |
| Cinematography -- Manufacturer-printed latent image identification information for 35 mm motion-picture colour-print film -- Specifications | |
| Cinematography -- Motion-picture camera cartridge, 8 mm Type S Model I -- Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness -- Dimensions and specifications | |
| Cinematography -- Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) -- Position and dimensions | |
| Cinematography -- Projector usage of 8 mm Type S motion-picture film for direct front projection | |
| Cinematography -- Work stations used for film and video production -- Requirements for visual and audio conditions | |
| Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven | |
| Coal -- Ultimate analysis | |
| Correct the (E) chemical names on: page 20, chlorprocarb; page 31, dimethrin; page 41, fenitrothion; page 63, parafluron; according to the names given in the amendment. Page 72, simetryn: correct... | |
| Corrosion of metals and alloys -- Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion | |
| Covers pest control chemicals and plant growth regulators of international importance. The standard is presented as a combined English/French text. It gives references to related standards and specifies the principles... | |
| Defines terms necessary for the design and construction of buildings in accordance with the principles and rules of modular coordination laid down in ISO 2848 and for the design and... | |
| Describes the principle, the reagents, the apparatus, the procedure, the expression of results and the contents of the test report. | |
| Determination on an undiluted product, at a specified temperature; calculation of the wanted content by means of tables showing the index as a function of composition, concentration and temperature. The... | |
| Doors -- Terminology | |
| Erythema reference action spectrum and standard erythema dose | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique | |
| Freight containers -- RFID cargo shipment tag system | |
| GEDI -- Generic Electronic Document Interchange | |
| Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities | |
| Gives an illustrated nomenclature of different types of formers for yarn packages as follows: cylindrical tubes or bobbins; tapered tubes; combined tubes. - Replaces ISO Recommendation R 1809-1970. | |
| Information processing -- Basic mode control procedures for data communication systems | |
| Intended primarily as a simple and rapid quality-control test during the manufacture and conversion of PVC compounds. Suitable for coloured compounds. Is not recommended for compounds in the form of... | |
| ISO 17078-2:2007 provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements... | |
| ISO 17078-3:2009 provides requirements and guidelines for running tools, pulling tools, kick-over tools and latches used for the installation and retrieval of flow control and other devices to be installed... | |
| ISO 17078-4:2010 provides informative documentation to assist the user/purchaser and the supplier/manufacture r in specification, design, selection, testing, calibration, reconditioning, installation and use of side-pocket mandrels, flow-control devices and associated... | |
| ISO 17080:2005 establishes principles and gives requirements for the design of single-panel product safety labels intended to be permanently affixed to manually portable agricultural and forestry machines and powered lawn... | |
| ISO 17081:2004 specifies a laboratory method for the measurement of hydrogen permeation and for the determination of hydrogen atom uptake and transport in metals, using an electrochemical technique. The term... | |
| ISO 17082:2004 specifies which data are to be included in the manufacturer's supplier literature that accompanies any kind of pneumatic valve. These data are vital in selecting the proper valve... | |
| ISO 17087:2006 specifies performance levels for adhesives to be used in finger joints in nonstructural bonded lumber products. Such products include, but are not limited to, interior and exterior mouldings,... | |
| ISO 17089-1:2010 specifies requirements and recommendations for ultrasonic gas flowmeters (USMs), which utilize the transit time of acoustic signals to measure the flow of single phase homogenous gases in closed... | |
| ISO 17090-1:2013 defines the basic concepts underlying the use of digital certificates in healthcare and provides a scheme of interoperability requirements to establish a digital certificate-enabled secure communication of health... | |
| ISO 17090-2:2008 specifies the certificate profiles required to interchange healthcare information within a single organization, between different organizations and across jurisdictional boundaries. It details the use made of digital certificates... | |
| ISO 17090-3:2008 gives guidelines for certificate management issues involved in deploying digital certificates in healthcare. It specifies a structure and minimum requirements for certificate policies, as well as a structure... | |
| ISO 17092:2005 describes the test method for determining the corrosion resistance of fine ceramics in acid and alkaline solutions, such as sulfuric acid and sodium hydroxide. This International Standard is... | |
| ISO 17095:2013 specifies the method of test for determining the interfacial tensile and shear bond strength of ceramic-ceramic, ceramic-metal, and ceramic-glass joining at elevated temperature by the compression tests on... | |
| ISO 17101-1:2012 gives specifications and acceptance criteria for thrown-object testing of rotary mowers used in agriculture. Examples of machines are shown. It is not applicable to the following: flail mowers; | |
| ISO 17101-2:2012 gives specifications and acceptance criteria for the thrown-object testing of flail mowers used in agriculture. Examples of machines are shown. It is not applicable to the following: large... | |
| ISO 17103:2009 specifies requirements and acceptance criteria for testing the protective skirts of rotary disc mowers, rotary drum mowers and flail mowers used in agriculture. | |
| ISO 17107:2011 specifies a format for use in exchanging spacecraft navigation data. Such exchanges are used for distributing attitude, orbit, and tracking data between space agencies. ISO 17107:2011 specifies an... | |
| ISO 1711-1:2007 specifies minimum values for Rockwell hardness and torsional strength for hand-operated wrenches and sockets. It covers three series of torsion torques: Series A: usual box wrenches and socket... | |
| ISO 1711-2:2005 specifies hardness and minimum torsional strength for machine-operated square drive sockets in accordance with ISO 2725-2 intended for use with impact wrenches. | |
| ISO 17115:2007 defines a set of basic concepts required to describe formal concept representation systems, especially for health sciences, and describes representation of concepts and characteristics, for use especially in... | |
| ISO 17123-1:2010 gives guidance to provide general rules for evaluating and expressing uncertainty in measurement for use in the specifications of the test procedures of ISO 17123-2, ISO 17123-3, ISO... | |
| ISO 17123-5:2012 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of coordinate measurement of total stations and their ancillary equipment when used in building and... | |
| ISO 17123-6:2012 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying measurements for... | |
| ISO 17123-7:2005 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of optical plumbing instruments and their ancillary equipment, when used in building and surveying measurements. | |
| ISO 17123-8:2007 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of Global Navigation Satellite System (GNSS) field measurement systems (this includes GPS, GLONASS as well... | |
| ISO 17126:2005 specifies test procedures for the determination of effects of contaminated soils or other contaminated samples on the emergence of lettuce seeds. ISO 17126:2005 is applicable to contaminated soils,... | |
| ISO 17129|IDF 206:2006 describes a method for the determination of the soy and pea protein isolates in low-heat milk powder, using capillary electrophoresis in the presence of sodium dodecyl sulfate... | |
| ISO 17130:2013 specifies a method of determining the dimensional change (shrinkage) of leathers caused by ageing. It is applicable to all leathers. | |
| ISO 17131:2012 specifies a method using microscopy to identify leather and distinguish it from other materials. The method is not applicable for identifying specific leathers (e.g. sheep leather). | |
| ISO 17132:2007 describes a method of evaluating the flexibility and adhesion of an organic coating on a metallic substrate by observing the cracking or loss of adhesion when a coated... | |
| ISO 17165-1:2007 specifies requirements for hose assemblies that are manufactured from hoses that conform to ISO 3949 and to all parts of ISO 1436, ISO 3862, ISO 4079 and ISO... | |
| ISO 1716:2010 specifies a method for the determination of the gross heat of combustion of products at constant volume in a bomb calorimeter. | |
| ISO 17178:2013 specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength, tensile strength to be... | |
| ISO 17180:2013 specifies a method for the quantitative determination of free (non-protein-bound) lysine, methionine, and threonine in commercial products and premixtures containing more than about 10 % mass fraction of... | |
| ISO 17186:2011 specifies a method for determining the thickness of the surface coating applied to leather when measured under zero compression. It is applicable to all types of leather. | |
| ISO 17189|IDF 194:2003 specifies a method for the determination of the fat content of butter, edible oil emulsions and spreadable fats (margarine, vegetable oil spreads, dairy spreads and blended spreads). | |
| ISO 17191:2004 specifies a method for the determination of polyacrylate (PA) superabsorbent powders in airborne dust by measurement of sodium (Na) by atomic absorption spectrometry (AAS). PA dust samples are... | |
| ISO 17194:2007 specifies a set of basic properties commonly required for the selection and use of structural adhesives in different applications. ISO standard test methods and test conditions are also... | |
| ISO 17201-1:2005 specifies a method to determine the acoustic source energy of the muzzle blast for calibres of less than 20 mm or explosive charges of less than 50 g... | |
| ISO 17201-2:2006 specifies methods for estimating the acoustic source data of muzzle blast and explosions and the source data of projectile sound on the basis of non-acoustic data for firearms... | |
| ISO 17201-3:2010 specifies methods of predicting sound exposure levels of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from... | |
| ISO 17201-4:2006 provides a computational model for determining the acoustical source level of projectile sound and its one-third-octave-ban d spectrum, expressed as the sound exposure level for nominal mid-band frequencies... | |
| ISO 17201-5:2010 gives guidelines for noise management of shooting activity at shooting ranges. The control of the noise received outside shooting ranges at specified reception points based either on measured... | |
| ISO 17202 specifies a method for the determination of the direction of twist in single yarns and the amount of twist, in terms of turns per unit length, by the... | |
| ISO 17212:2012 provides and describes the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation or the process of construction. It is applicable to... | |
| ISO 17214:2011 defines services and service interfaces provided by the Spacecraft Onboard Interface Services (SOIS) time access service. It specifies only the service and not the methods of providing the... | |
| ISO 17226-1:2008 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and not... | |
| ISO 17226-2:2008 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on colorimetric analysis. The formaldehyde content is taken to be the... | |
| ISO 17226-3:2011 specifies a method for determining the emission of formaldehyde from leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and also allows the... | |
| ISO 17227:2002 specifies a method of determining the dry heat resistance of conditioned leathers. It is applicable to all leathers. | |
| ISO 17229:2002 specifies a method for determining the water vapour absorption of leather. The method is applicable for all leathers but is particularly relevant for leathers intended for footwear uppers... | |
| ISO 17230:2006 describes a method for determining the water penetration pressure of leather. | |
| ISO 17231:2006 specifies a method for determining the repellency of leather to surface wetting. It is applicable to all leathers intended for use in clothing. The method does not determine... | |
| ISO 17232:2006 specifies two methods for determining the heat resistance of patent leather. Method A makes use of a modified lastometer while Method B uses the "Zwik" apparatus. Both methods... | |
| ISO 17233:2002 specifies a method for determining the cold crack temperature of surface coatings applied to leather. It is applicable to all leathers which have a surface coating and which... | |
| ISO 17234-1:2010 specifies a method for determining the use of certain azo colorants which may release certain aromatic amines. | |
| ISO 17234-2:2011 is supplementary to ISO 17234-1 and describes a special procedure to detect the use of certain azo colorants in commodities, which can release 4-aminoazobenzene. The procedure also detects... | |
| ISO 17235:2011 specifies a non-destructive method for determining the softness of a leather. It is applicable to all non-rigid leathers, e.g. shoe-upper leather, upholstery leather, leather-goods leather and apparel leather... | |
| ISO 17236:2002 specifies a method for determining the extension set of leather. It is intended for use on upholstery leather but is applicable to all flexible leathers. | |
| ISO 17239:2004 specifies a hydride generation atomic absorption spectrometric method for the determination of the arsenic content of fruits, vegetables and derived products. | |
| ISO 17240:2004 specifies an atomic absorption spectrometric method for the determination of the tin content of fruit and vegetable products in the concentration range 10 mg/kg to 500 mg/kg. It... | |
| ISO 17246:2010 establishes a practice for the proximate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals. | |
| ISO 17249:2004 specifies requirements for safety footwear with resistance to chain saw cutting. | |
| ISO 1724:2003 specifies the dimensions of, and contact allocation tests and requirements for, 7-pole connectors of type 12 N for the electrical connection between towing and towed vehicles with 12... | |
| ISO 1726-2:2007 specifies dimensions to ensure interchangeability between a low coupling height tractor vehicle and a coupled high-volume semi-trailer, the two together constituting a high-volume articulated vehicle. It specifies certain... | |
| ISO 1726-3:2010 specifies the test conditions of a static test to be performed on the semi-trailer contact area to the fifth wheel. It ensures the ability of the semi-trailer to... | |
| ISO 17261:2012 describes the conceptual and logical architecture for automatic vehicle and equipment identification (AVI/AEI) and supporting services in an intermodal/multimoda l environment. It presents a high level view of... | |
| ISO 17262:2012 defines generic numbering and data structures for unambiguous identification of equipment used for Intermodal goods transport. These data are known as "Intermodal Goods Transport Numbering and Data Structures". | |
| ISO 17263;2012 establishes an AEI system based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows the transfer of the identification codes and further... | |
| ISO 17266:2002 specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm... | |
| ISO 17267:2009 specifies an application programming interface (API) for navigation systems. It specifies the data that may be retrieved from the map database and defines the interface for access. This... | |
| ISO 17268:2012 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors consisting of, as applicable, a receptacle and a protective cap (mounted on vehicle),... | |
| ISO 17278:2013 specifies a method for the determination of gel content for technically specified rubbers (TSR). | |
| ISO 17281 provides guidelines for determining the fracture toughness of plastics in the crack-opening mode (Mode I) by a linear elastic fracture mechanics (LEMF) approach, at load-point displacement rates of... | |
| ISO 17282:2004 gives guidelines for the acquisition and presentation of data that can be used for design with plastics. Emphasis is given to the acquisition of data needed by computerised... | |
| ISO 17287:2003 specifies a procedure for assessing whether specific TICS, or a combination of TICS with other in-vehicle systems, are suitable for use by drivers while driving. It addresses user-oriented... | |
| ISO 17288-1:2011 specifies an open-loop test method for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering... | |
| ISO 17288-2:2011 specifies a procedure for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering pulse input,... | |
| ISO 1728:2006 specifies the requirements which ensure interchangeability of the pneumatic braking connections between motor vehicles and towed vehicles. It concerns vehicle combinations equipped with pneumatic braking systems with two... | |
| ISO 17292:2004 specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications. It covers valves of the nominal sizes... | |
| ISO 17294-1:2004 specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general directions for the use of this technique for determining elements in water. Generally, the measurement... | |
| ISO 17294-2:2003 specifies a method for the determination of the elements aluminium, antimony, arsenic, barium, beryllium, bismuth, boron, cadmium, caesium, calcium, cerium, chromium, cobalt, copper, dysprosium, erbium, europium, gadolinium, gallium,... | |
| ISO 17312:2005 specifies the determination of the hydraulic conductivity of granular soils (e.g. sand and gravel) using a constant-head method involving a rigid-wall permeameter to measure the laminar flow of... | |
| ISO 17313:2004 specifies a test method for laboratory measurement of the hydraulic conductivity of water-saturated porous materials using a flexible wall permeameter. ISO 17313:2004 is applicable to undisturbed or compacted... | |
| ISO 17314:2008 specifies a method for calculating the recyclability rate and the recoverability rate of manually portable forest machinery, with each rate being expressed as a percentage by mass (mass... | |
| ISO 17321-1:2012 specifies colour stimuli, metrology, and test procedures for the colour characterization of a digital still camera (DSC) to be used for photography and graphic technology. Two methods are... | |
| ISO 17331:2004 specifies chemical methods for the collection of iron and/or nickel from the surface of silicon-wafer working reference materials by the vapour-phase decomposition method or the direct acid droplet... | |
| ISO 17334:2008 specifies the requirements for autocatalytic nickel-phosphorus alloy coatings applied over autocatalytic copper coatings to provide electromagnetic interference (EMI) or electrostatic discharge (ESD) protection for parts fabricated from either... | |
| ISO 17338:2009 specifies the design and layout of drawings for indicating the fire rating of thermal and structural boundaries (divisions) for fire protection of ships. | |
| ISO 17339:2002 specifies requirements for the design, performance and prototype testing of sea anchors fitted to survival craft (lifeboats and liferafts) and rescue boats in accordance with the IMO International... | |
| ISO 17351:2013 specifies requirements and provides guidance for the application of Braille to the labelling of medicinal products. | |
| ISO 17352:2008 specifies a test method, using graphite-furnace atomic absorption, to determine the mass fraction of silicon in cobalt metal powder with varying compositions within the range of 5 µg/g... | |
| ISO 17353:2004 specifies a method for the identification and quantification of monobutyltin, dibutyltin, tributyltin, tetrabutyltin, monooctyltin, dioctyltin, triphenyltin, tricyclohexyltin compounds and/or cations in drinking water, surface water and wastewater containing... | |
| ISO 17355:2007 defines a CCSDS file delivery protocol (CFDP) and associated service for application in the space environment. It is intended for use over the current and envisaged packet delivery... | |
| ISO 17356-1:2005 outlines the general structure of, and defines terms and abbreviations used in relation to, the specification of the software open interface for embedded automotive applications given by the... | |
| ISO 17356-2:2005 gives the OSEK/VDX specifications for binding the OS (operating system), COM (communications) and NM (network management) of the open interface for embedded automotive applications. It specifies the variables... | |
| ISO 17356-3:2005 describes the concept of a real-time operating system, capable of multitasking, which can be used for motor vehicles. It is not a product description which relates to a... | |
| ISO 17356-4:2005 (COM) specifies a uniform communication environment for automotive control unit (ECU) application software. In ISO 17356-4:2005 , the specification increases the portability of application software modules by defining... | |
| ISO 17356-5:2006 defines a set of services for node monitoring (NM). NM consists of the following: interface to interact with the Application Programming Interface(API); algorithm for node monitoring; internal interfaces... | |
| ISO 17356-6:2006 describes the OSEK Implementation Language (OIL) concept for the description for ISO 17356 real-time systems, capable of multitasking and communications, which can be used for motor vehicles. It... | |
| ISO 17357:2002 specifies the material, performance and dimensions of high-pressure floating pneumatic rubber fenders, which are intended to be used for the berthing and mooring of a ship to another... | |
| ISO 17359:2011 sets out guidelines for the general procedures to be considered when setting up a condition monitoring programme for machines and includes references to associated standards required in this... | |
| ISO 1735|IDF 5:2004 specifies the reference method for the determination of the fat content of all types of cheese and processed cheese products having lactose contents of below 5 %... | |
| ISO 17361:2007 specifies the definition of the system, classification, functions, human-machine interface (HMI) and test methods for lane departure warning systems. These are in-vehicle systems that can warn the driver... | |
| ISO 17363:2013 defines the usage of read/write radio-frequency identification technology (RFID) cargo shipment-specific tags associated with containerized freight for supply chain management purposes ("manifest tags"). ISO 17363:2013 defines the air... | |
| ISO 17365:2013 defines the basic features of RFID for use in the supply chain when applied to transport units. In particular it a) provides specifications for the identification of the... | |
| ISO 17366:2013 defines the basic features of RFID for use in the supply chain when applied to product packaging. In particular it a) provides specifications for the identification of the... | |
| ISO 17367:2013 defines the basic features of RFID for use in the supply chain when applied to product tagging. In particular it a) provides specific recommendations about the encoded identification... | |
| ISO 17369:2013 provides an integrated approach to facilitating Statistical Data and Metadata Exchange (SDMX), enabling interoperable implementations within and between systems concerned with the exchange, reporting and dissemination of statistical... | |
| ISO 1736|IDF 9:2008 specifies the reference method for the determination of the fat content of dried milk and dried milk products. The method is applicable to dried milk with a... | |
| ISO 17372:2007 is applicable to the analysis of zearalenone in animal feed and feed ingredients, including barley, corn, oats, rye, wheat, soybean meal, canola (rapeseed) meal, corn gluten, dried distillers'... | |
| ISO 17375:2006 specifies a method for the determination of aflatoxin B1 in animal feeding stuffs using high-performance liquid chromatography with post-column derivatization. It is applicable to animal feeding stuffs... | |
| ISO 1737|IDF 13:2008 specifies the reference method for the determination of the fat content of all types of evaporated milk and sweetened condensed milk (liquid sweetened and unsweetened concentrated milk). | |
| ISO 17380:2013 specifies a method for the photometric determination of the total cyanide and easily-liberatable cyanide content in soil using automated distillation/continu ous-flow analysis. ISO 17380:2013 applies to all types... | |
| ISO 17381:2003 gives guidance on the selection, and requirements for the application, of ready-to-use methods in water analysis. The so-called "ready-to-use methods" are of increasing interest because, compared to standard... | |
| ISO 17382:2007 specifies certain characteristics of the oil of Magnolia flower, China type (Michelia x alba DC), in order to facilitate assessment of its quality. | |
| ISO 17386:2010 addresses light-duty vehicles, e.g. passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded) equipped with MALSO (Manoeuvring Aids for Low Speed Operation) systems. It specifies... | |
| ISO 17387:2008 specifies system requirements and test methods for Lane Change Decision Aid Systems (LCDAS). LCDAS are fundamentally intended to warn the driver of the subject vehicle against potential collisions... | |
| ISO 1738|IDF 12:2004 specifies a method for the determination of the salt content of butter. The method is applicable to all types of butter containing more than 0,1 % (mass... | |
| ISO 17398:2004 specifies requirements for a performance-related classification system for safety signs according to expected service environment, principal materials, photometric properties, means of illumination, fixing methods and surface. Performance criteria... | |
| ISO 17399:2003 defines all generic requirements for manned space flight vehicle/habitat structures and flight crew training or simulation facilities and the related equipment that directly interfaces with manned space system... | |
| ISO 1739|IDF 7:2006 specifies a reference method for the determination of the refractive index of the fat obtained by melting butter. | |
| ISO 17401:2004 provides spacecraft (SC) organizations with the general format for presenting the interface requirement document (IRD) for launch vehicle services. The IRD provides a list of the major technical... | |
| ISO 17402:2008 provides guidance for the selection and application of methods to assess bioavailability for the characterisation of contaminated soil and soil materials. ISO 17402:2008 does not give a selection... | |
| ISO 1740|IDF 6:2004 specifies a method for the determination of the acidity of the fat contained in milkfat products and in butter. | |
| ISO 17412 specifies certain characteristics of the oil of bitter fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare), in order to facilitate assessment of its quality. | |
| ISO 17422:2002 provides a structure for inclusion of environmental aspects in standards for plastics products. It proposes an approach which is directed at minimizing any adverse environmental impact without detracting... | |
| ISO 17432:2005 specifies a web-based service for accessing and presenting DICOM (Digital Imaging and Communications in Medicine) persistent objects (e.g. images, medical imaging reports). This is intended for distribution of... | |
| ISO 17442:2012 specifies the elements of an unambiguous legal entity identifier (LEI) scheme to identify the legal entities relevant to any financial transaction. | |
| ISO 17450-1:2011 provides a model for geometrical specification and verification and defines the corresponding concepts. It also explains the mathematical basis of the concepts associated with the model and defines... | |
| ISO 17454:2006 specifies a method for testing the adhesion between layers of multilayer pipes using a pulling test rig. | |
| ISO 17455:2005 specifies two test methods for determining the oxygen permeability of barrier pipe: the dynamic and the static methods. | |
| ISO 17456:2006 specifies two alternative methods for determining the long-term hydrostatic strength of multilayer pipes: a calculation method applicable to multilayer P pipes (all polymer layers) and a test method... | |
| ISO 17458-1:2013 gives an overview of the structure and the partitioning of ISO 17458 and shows the relation between the different parts. In addition, it outlines the use case scenarios... | |
| ISO 17458-2:2013 specifies the FlexRay communication protocol which is specified for a dependable automotive network. Some of the basic characteristics of the FlexRay protocol are synchronous and asynchronous frame transfer,... | |
| ISO 17458-3:2013 specifies the FlexRay protocol conformance test. This test verifies the conformance of FlexRay communication controllers with respect to ISO 17458-2. Some testability requirements are given and are applicable... | |
| ISO 17458-4:2013 specifies the electrical physical layer for FlexRay communications systems. The electrical physical layer for FlexRay is designed for time-triggered networks with data-rates up to 10 Mbit/s to connect... | |
| ISO 17458-5:2013 specifies the conformance test for the electrical physical layer of the FlexRay communications system. ISO 17458-5:2013 defines a test that considers ISO 9646 and ISO 17458-4. It provides... | |
| ISO 17467-1:2012 specifies the general properties of unplasticized polyamide (PA-U) compounds for the manufacturing of pipes, fittings and valves made from such compounds, intended to be buried and used for... | |
| ISO 17467-2:2012 specifies the physical and mechanical properties of pipes made from unplasticized polyamide (PA-U) in accordance with ISO 17467-1, intended to be buried and used for the supply of... | |
| ISO 17467-3:2012 specifies the physical and mechanical characteristics of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 17467-1, intended to be buried and used for the supply of... | |
| ISO 17470:2004 gives guidance for the identification of elements and the investigation of the presence of specific elements, within a specific volume, contained in a specimen, by analysing X-ray spectra... | |
| ISO 17474:2012 is intended to provide conventions for reporting and displaying electrochemical corrosion data. Conventions for potential, current density and electrochemical impedance, as well as conventions for graphical presentation of... | |
| ISO 17475:2005 applies to corrosion of metals and alloys, and describes the procedure for conducting potentiostatic and potentiodynamic polarization measurements. The test method can be used to characterise the electrochemical... | |
| ISO 17479:2013 specifies methods for the direct measurement of the concentration of gaseous exhaust emissions from motorcycles as defined in ISO 3833 during inspection or maintenance. The results measured by... | |
| ISO 17484-1:2006 specifies the general requirements and the performance requirements for multilayer pipe systems based on pipes, fittings and their joints intended to be used for gas supply within buildings. | |
| ISO 17484-2:2009 specifies the recommended practice for the installation of multilayer pipe systems in accordance with ISO 17484-1:2006. It is applicable to piping systems used in buildings to supply gas... | |
| ISO 17485:2006 establishes a classification system that can be used to communicate geometrical accuracy specifications of unassembled bevel gears, hypoid gears, and gear pairs. It defines gear tooth accuracy terms,... | |
| ISO 17491-3:2008 specifies a test method for determining the resistance of protective clothing against penetration by a jet of liquid. ISO 17491-3:2008 is applicable to clothing with liquid-tight connections between... | |
| ISO 17491-4:2008 specifies methods for determining the resistance of chemical protective clothing to penetration by sprays of liquid chemicals at two different levels of intensity: Method A: low-level spray test. | |
| ISO 17492:2003 specifies a test method for measuring the heat transfer of horizontally mounted flame-resistant textile materials when exposed to a combination of convective and radiant energy. This test method... | |
| ISO 17497-1:2004 specifies a method of measuring the random-incidence scattering coefficient of surfaces as caused by surface roughness. The measurements are made in a reverberation room, either in full scale... | |
| ISO 17499:2006 covers carbonaceous materials used in the production of aluminium. ISO 17499:2006 specifies the determination of the equivalent temperature of one anode or cathode in a baking furnace, and... | |
| ISO 17500:2006 specifies a procedure for the determination of the attrition index of smelter-grade alumina. | |
| ISO 17502:2013 specifies a method for determining the reflectance properties of a leather surface for visible and near infra-red radiation. The reflection value in the near infra-red determines if a... | |
| ISO 17510-1:2007 specifies requirements for equipment intended for sleep apnoea breathing therapy for domiciliary use, ships, aircraft and other transport vehicles and for use in healthcare institutions. ISO 17510-1:2007 applies... | |
| ISO 17510-2:2007 applies to masks, their fixing and to the accessories used to connect a sleep apnoea breathing therapy equipment to the patient. It specifies requirements for masks and accessories,... | |
| ISO 17511:2003 specifies how to assure the metrological traceability of values assigned to calibrators and control materials intended to establish or verify trueness of measurement. The calibrators and control materials... | |
| ISO 17512-1:2008 specifies a rapid screening method for evaluating the habitat function of soils and the influence of contaminants and chemicals on earthworm behaviour. The sublethal test is a rapid... | |
| ISO 17512-2:2011 specifies a rapid screening method for evaluating the habitat function of soils based on the avoidance behaviour of springtails. The test is a rapid method that reflects the... | |
| ISO 17514:2004 specifies the test methods for the photoluminescent deposits applied to time-measuring instruments, together with the requirements related to them. | |
| ISO 17526:2003 covers terms and definitions as well as test methods and evaluation procedures to characterize, estimate and predict the longterm behaviour of various types of lasers. It defines terms... | |
| ISO 17532:2007 specifies a protocol for the automatic and interactive communication and control of computer systems used in livestock production. It supports communication within the livestock production as well as... | |
| ISO 17544:2004 describes a method of producing a compaction curve indicating the rammability of carbonaceous ramming pastes used to line cathodes utilized in the production of aluminium. | |
| ISO 1754:2010 specifies the dimensions on the film of still picture sizes made with cameras in which the image dimensions are defined by the camera frame. Panoramic image dimensions of... | |
| ISO 17554:2005 specifies a small-scale method for assessing the mass loss rate of essentially flat specimens exposed in the horizontal orientation to controlled levels of radiant heating with an external... | |
| ISO 17555:2003 specifies the requirements for biaxially oriented polypropylene (PP) films, which are mainly used for packaging. The film may be used alone or in laminates with other films. This... | |
| ISO 17556:2012 specifies a method for determining the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a closed respirometer or the amount of carbon... | |
| ISO 17557:2003 specifies the requirements for cast polypropylene (PP) films, which are mainly used for packaging. | |
| ISO 17558:2006 specifies procedures for the molten metal and resin socketing of steel wire ropes. It also specifies a type testing method for assessing the performance of a socketing system. | |
| ISO 17560:2002 specifies a secondary-ion mass spectrometric method using magnetic-sector or quadrupole mass spectrometers for depth profiling of boron in silicon, and using stylus profilometry or optical interferometry for depth... | |
| ISO 17561 describes the method of test for determining the dynamic elastic moduli of fine ceramics at room temperature by sonic resonance. This International Standard is for fine ceramics that... | |
| ISO 17564:2008 specifies a method using Wijs' solution to determine the iodine value (i.e. the residual unsaturation) of raw hydrogenated nitrile rubber (HNBR). | |
| ISO 17565:2003 describes the method of test for determining the flexural strength of monolithic fine ceramics and whisker- or particulate-reinforc ed ceramic composites at elevated temperature. Flexural strength is one... | |
| ISO 17566:2011 provides a specific format for the development of test documentation for an individual test of a spacecraft, subsystem or unit. It is focused on the definition of the... | |
| ISO 17567:2005 specifies the hydraulic power beyond of tractors used in agricultural and forestry, and the number, type, capacity and identification of the associated connections between these tractors and their... | |
| ISO 17572 specifies Location Referencing Methods (LRM) that describe locations in the context of geographic databases and will be used to locate transport-related phenomena in an encoder system as well... | |
| ISO 17573:2010 defines the architecture of a toll system environment in which a customer with one contract can use a vehicle in a variety of toll domains and with a... | |
| ISO 17577:2006 specifies a method for the automated and/or manual ultrasonic testing of uncoated steel flat products for internal discontinuities by the reflection method. It is applicable to non-alloyed or... | |
| ISO 17584:2005 specifies thermophysical properties of several commonly used refrigerants and refrigerant blends. ISO 17584:2005 is applicable to the refrigerants R12, R22, R32, R123, R125, R134a, R143a, R152a, R717 (ammonia),... | |
| ISO 17591 defines identifying terms, specifies a means of classification and gives a nomenclature of components for the knuckleboom log loader machinery used in forestry. Its aim is to establish... | |
| ISO 17593:2007 specifies requirements for in vitro measuring systems for self-monitoring of vitamin-K antagonist therapy, including performance, quality assurance and user training and procedures for the verification and validation of... | |
| ISO 17599:2003 specifies methods for determining the steady-state performance characteristics and dynamic performance characteristics of positive-displacemen t electrically and electronically controlled hydraulic pumps, so as to allow comparison of the... | |
| ISO 175:2010 specifies a method of exposing test specimens of plastic materials, free from all external restraint, to liquid chemicals, and methods for determining the changes in properties resulting from... | |
| ISO 17604:2003 specifies sampling methods for the detection and enumeration of microorganisms on the carcass surface of freshly slaughtered (red) meat animals. The microbiological sampling can be carried out as... | |
| ISO 17612:2004 specifies the essential interface dimensions of a connector and its plug for the transmission of 12 V electrical power within the enclosed operator station of agricultural tractors and... | |
| ISO 17615:2007 defines the requirements for grades of alloyed aluminium ingots intended for remelting. It specifies the classifications and designations applicable to these grades, the conditions in which they are... | |
| ISO 17616:2008 is one of a series providing guidance on the characterization of soils and soil materials in relation to their retention and habitat function and uses. It should be... | |
| ISO 17624:2004 deals with the effectiveness of acoustical screens. It specifies the acoustical and operational requirements to be agreed upon between the supplier or manufacturer and the user of acoustical... | |
| ISO 17624:2009 provides the specifications of: common AVI/AEI transaction requirements, which define the common steps of any AVI/AEI transaction; AVI/AEI application interface to standardized wireless protocols (referred to as the... | |
| ISO 17632:2004 specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of non-alloy and fine grain steels in the as-welded condition... | |
| ISO 17633:2010 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding... | |
| ISO 17634:2004 specifies requirements for classification of tubular cored electrodes used in the post weld heat treated condition for gas shielded metal arc welding of creep-resisting and low alloy elevated... | |
| ISO 17635:2010 gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness,... | |
| ISO 17636-1:2013 specifies techniques of radiographic examination of fusion welded joints in metallic materials using industrial radiographic film techniques. ISO 17636-1:2013 applies to the joints of plates and pipes. Besides... | |
| ISO 17636-2:2013 specifies fundamental techniques of digital radiography with the object of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on generally recognized practice and... | |
| ISO 17637:2003 covers the visual examination of fusion welds in metallic materials. It may also be applied to visual examination of the joint prior to welding. | |
| ISO 17638:2003 specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques are suitable for... | |
| ISO 17639:2003 gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination. | |
| ISO 17640:2010 specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness greater than or equal to 8 mm which exhibit low ultrasonic attenuation (especially... | |
| ISO 17641-1:2004 gives an introduction to the fundamentals of hot cracking in weld metals and parent alloys, and briefly describes the tests available for arc welding processes. | |
| ISO 17641-2:2005 specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests. The following tests are described: T-joint weld... | |
| ISO 17642-1:2004 describes the fundamentals of cold crack formation and the principles of cold cracking tests. These tests can be used to determine the cold cracking sensitivity of welding consumables,... | |
| ISO 17642-2:2005 specifies the sizes of the test pieces, the specimens and the procedures for carrying out self-restraint cold cracking tests by: CTS (controlled thermal severity) test Tekken (Y-groove) or... | |
| ISO 17642-3:2005 specifies the sizes of the backing plates, specimens and procedures for carrying out externally loaded cold cracking tests by implant testing in order to obtain information about the... | |
| ISO 17643:2005 defines eddy current testing techniques for detection of surface breaking and near surface planar discontinuities, mainly in ferritic materials (weld material, heat-affected zones, parent materials). Eddy current testing... | |
| ISO 17652-1:2003 specifies standardized conditions for an assessment of shop primers on the weldability of steel materials. It is intended to be used for assessment of shop primers by testing... | |
| ISO 17652-2:2003 describes tests for assessing the influence of shop primers on the weldability. The following tests are detailed. Rating test This screening test provides a method of assessing the... | |
| ISO 17652-3:2003 specifies a test method for determination of a shop primers influence on the maximum speed usable for thermal cutting. | |
| ISO 17652-4:2003 specifies rating of shop primers as regards their influence on emission of fumes and gases during welding. | |
| ISO 17655:2003 specifies the determination of the delta ferrite content of welds, of surfacings with austenitic weld metal, welding being carried out on welding procedure tests and production coupon test... | |
| ISO 17657-1:2005 specifies equipment for the calibration of measuring systems of welding current and indicating weld time in resistance welding using single-phase alternating current of frequency 50 Hz or 60... | |
| ISO 17657-2:2005 specifies a welding current meter with a current sensing coil to measure the weld time and the r.m.s. value of the welding current during a certain interval using... | |
| ISO 17657-3:2005 specifies current sensing coils of the toroidal-coil type as a current sensor for welding current meters or a welding current measuring system used to monitor the welding current... | |
| ISO 17657-4:2005 specifies calibration systems and calibration procedures for welding current measuring systems, current sensors, welding current meters and monitoring devices with current sensor used for measuring welding current in... | |
| ISO 17657-5:2005 specifies a verification procedure for welding current meters and monitoring devices with current sensing coil, which are applied in measuring welding current in resistance welding using alternating current... | |
| ISO 17660-1:2006 is applicable to the welding of weldable reinforcing steel and stainless reinforcing steel of load-bearing joints, in workshops or on site. It specifies requirements for materials, design and... | |
| ISO 17660-2:2006 is applicable to the welding of weldable reinforcing steel and stainless reinforcing steel of non load-bearing welded joints, in workshops or on site. It specifies requirements for materials,... | |
| ISO 17662:2005 specifies requirements for calibration, verification and validation of equipment used for: control of process variables during fabrication; control of the properties of equipment used for welding or welding... | |
| ISO 17663:2009 provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site in connection with welding and forming. It applies mainly to... | |
| ISO 17664:2004 specifies the information to be provided by the medical device manufacturer on the processing of medical devices claimed to be resterilizable, and medical devices intended to be sterilized... | |
| ISO 17666:2003 extends the requirements of ISO 14300-1, the principles and requirements for integrated risk management on a space project. It explains what is needed to implement a project-integrated risk... | |
| ISO 17672:2010 specifies the compositional ranges of a series of filler metals used for brazing. The filler metals are divided into seven classes, related to their composition, but not necessarily... | |
| ISO 17677-1:2009 establishes a vocabulary of terms and definitions for resistance spot welding, projection welding and seam welding. | |
| ISO 17678|IDF 202:2010 specifies a reference method for the determination of milk fat purity using gas chromatographic analysis of triglycerides. Both vegetable fats and animal fats such as beef tallow... | |
| ISO 17682:2013 specifies general guidelines for ship launching utilizing air bags, including the specification of the ship and facilities such as air bags, slipway, towing arrangements, the launching procedure, and... | |
| ISO 17687:2007 supports the application of automated identification, monitoring and exchange of emergency response information regarding dangerous goods carried on board road transport vehicles. Such information may include the identification,... | |
| ISO 17693:2004 specifies a test method to determine the lastability of uppers or complete upper assemblies, irrespective of the material used, in order to assess suitability for end use. | |
| ISO 17694:2003 specifies a test method for determining the flex resistance of uppers and linings irrespective of the material, in order to assess the suitability for the end use. | |
| ISO 17695:2004 specifies a test method for determining deformability of uppers or complete upper assemblies, irrespective of the material used, in order to assess suitability for end use. | |
| ISO 17696:2004 specifies a test method for assessing the tear strength of uppers, linings and insocks or complete upper assemblies, irrespective of material, in order to assess suitability for end... | |
| ISO 17697:2003 specifies two test methods for determining the seam strength of uppers, lining or insocks, irrespective of the material, in order to assess the suitability for the end use. | |
| ISO 17698:2003 specifies a test method for determining the delamination resistance of uppers irrespective of the material, in order to assess the suitability for the end use. | |
| ISO 17699:2003 specifies two test methods for assessing, respectively, the water vapour permeability and the water vapour absorption of uppers or complete upper assembly irrespective of the material, in order... | |
| ISO 176:2005 specifies two empirical methods for the quantitative determination of the loss of mass from a plastic material under defined conditions of rime and temperature, in the presence of... | |
| ISO 17700:2004 specifies two test methods for assessing the degree of damage (marring) and transfer of a material's surface colour during mild dry or wet abrasion. The methods are applicable... | |
| ISO 17701:2003 specifies a test method for determining the propensity of a material to cause discolouration of another material when stored in close contact. This method is applicable to all... | |
| ISO 17702:2003 specifies a test method for determining the resistance of footwear upper material to water penetration on flexing, in order to assess the suitability for the end use. | |
| ISO 17703:2003 specifies a test method for determining the effect of heat on the tensile strength of uppers or complete upper assemblies irrespective of the material, in order to assess... | |
| ISO 17704:2004 specifies a test method for determining the resistance of uppers, linings and insocks, irrespective of the material, to wet and dry abrasion, in order to assess the suitability... | |
| ISO 17705:2003 specifies a test method for determining the thermal conductivity of uppers, lining and insocks irrespective of the material, in order to assess the suitability for the end use. | |
| ISO 17706:2003 specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material, in order to asses the suitability for the... | |
| ISO 17707:2005 specifies a method for determining the flex resistance of outsoles. This method is intended to assess the effect of sole materials and surface patterns on cut growth. This... | |
| ISO 17708:2003 describes a test method for the determination of the resistance to separation of the upper from the outsole or the resistance to separation of adjacent layers of the... | |
| ISO 17709:2004 specifies the sampling location, preparation and duration of conditioning of samples and test pieces for footwear components and footwear, to carry out the test methods needed to... | |
| ISO 17712:2013 establishes uniform procedures for the classification, acceptance, and withdrawal of mechanical freight container seals. It provides a single source of information on mechanical seals which are acceptable for... | |
| ISO 17713-1:2007 describes wind tunnel test methods for determining performance characteristics of rotating anemometers, specifically cup anemometers and propeller anemometers. It also describes an acceptance test and unambiguous methods for... | |
| ISO 17714:2007 defines characteristics of a thermometer shield/screen. It also defines test methods to inter-compare the behaviour of different screen designs. Although screens are usually used for both air temperature... | |
| ISO 17715:2013 specifies the determination of the damage to starch using an amperometric method. It is applicable to all flour samples from industrial or laboratory milling of wheat (Triticum... | |
| ISO 17718:2013 specifies the determination of rheological behaviour as a function of mixing and temperature increase. It is applicable to all wholemeal and flour samples from industrial or laboratory milling... | |
| ISO 17724:2003 defines terms relating to graphical symbols, principally symbols for public information and use on equipment and safety signs. It does not include terms related to graphical symbols for... | |
| ISO 17727:2012 describes the quality control sampling plans for the receipt and shipping of ready-to-use cylindrical stoppers (flush with cork mouth finish) in semi-worked or finished cork used for still... | |
| ISO 17733:2004 specifies a procedure for determination of the time-weighted average mass concentration of mercury vapour and inorganic mercury compounds in workplace air. Mercury vapour is collected on a solid... | |
| ISO 17734-1:2006 gives general guidance for the sampling and analysis of airborne isocyanates in workplace air. The method is suitable for the determination of a wide range of different isocyanates... | |
| ISO 17734-2:2006 gives general guidance for the sampling and analysis of airborne amines and aminoisocyanates in workplace air. The method can be used for simultaneous determinations of amines, 4,4'-methylenediphen yldiamine... | |
| ISO 17735:2009 gives general guidance for the sampling and analysis of airborne organic isocyanates in workplace air. ISO 17735:2009 is appropriate for a wide range of organic compounds containing isocyanate... | |
| ISO 17736:2010 gives general guidelines for the sampling and analysis of airborne isocyanates in workplace air. ISO 17736:2010 is appropriate for organic compounds containing free isocyanate functional groups and is... | |
| ISO 17744:2004 describes procedures for determining the specific volume of plastics as a function of temperature and pressure in both the molten and solid states. The standard specifies the use... | |
| ISO 17751:2007 specifies a method for the identification and quantitative analysis of wool and speciality animal fibres using both light microscopy (LM) and scanning electron microscopy (SEM). The standard is... | |
| ISO 17769-1:2012 specifies terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of... | |
| ISO 17769-2:2012 specifies terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of... | |
| ISO 17771:2002 specifies a method for determining the degree of wetting of the reinforcement in a sheet moulding compound (SMC). It is applicable to quality control by the user of... | |
| ISO 17775:2006 specifies the detail dimensions of the male connector interfaces, fitted to an aircraft, used for servicing of the potable water systems, the toilet-flush water systems, and the toilet... | |
| ISO 17792|IDF 180:2006 specifies methods for the enumeration of citrate-fermenting lactic acid bacteria using a colony-count technique at 25 °C. The methods are applicable to dairy starter cultures and dairy... | |
| ISO 17804:2005 defines the grades and the corresponding requirements for ausferritic spheroidal graphite cast irons. ISO 17804:2005 specifies five grades of ausferritic spheroidal graphite cast iron by a classification based... | |
| ISO 17807:2013 defines a CCSDS Asynchronous Message Service (AMS) for mission data system communications. The service and its protocols implement an architectural concept under which the modules of mission systems,... | |
| ISO 17812:2007 specifies the procedure for the determination of total magnesium, total calcium, total manganese, total iron and total copper by atomic absorption spectrometry or by plasma emission spectrometry. The... | |
| ISO 17824:2009 provides the requirements and guidelines for sand control screens for use in the petroleum and natural gas industries. Included are the requirements for design, design validation, functional evaluation,... | |
| ISO 17832:2009 specifies the definition and requirements of unparalleled steel wire and cords for tyre reinforcement. | |
| ISO 17834:2003 is applicable to sprayed metal coatings for protection against corrosion at temperatures up to 1 000 °C (1 273 K). For the protection of iron and steel by... | |
| ISO 17836:2004 defines the procedure for determining the deposition efficiency for a thermal spray process in connection with a spray material and related equipment and auxiliary materials. It is applicable... | |
| ISO 17846:2004 specifies the format and symbols for wordless precautionary labels placed by manufacturers on their equipment and consumables used in arc welding, plasma arc cutting, and thermal/flame cutting processes. | |
| ISO 17852:2006 specifies a method for the determination of mercury in drinking, surface, ground and rain water using atomic fluorescence spectrometry. It may be applied to industrial and municipal waste... | |
| ISO 17853:2011 specifies methods for sampling wear particles generated by joint replacement implants in humans and in joint simulators. It specifies the apparatus, reagents and test methods to isolate and... | |
| ISO 17854:2013 defines an efficient and comprehensive coding and modulation solution able to support a wide range of spectral efficiency values and data rates. The main target is given by... | |
| ISO 17858:2007 specifies a method for the determination of dioxin-like tetra- to hepta-chlorinated biphenyls (PCBs) in waters and wastewaters (containing less than 1 % suspended solids) using high-resolution gas chromatography/high-... | |
| ISO 17864:2005 describes the procedure for determining the critical pitting temperature for stainless steels (austenitic, ferritic/austenitic, ferritic stainless steel) under potentiostatic control. The principal advantage of the test is the... | |
| ISO 17872:2007 describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 micrometres. It is... | |
| ISO 17873:2004 specifies the applicable requirements concerning the design and use of ventilation systems in nuclear installations such as hot cells, nuclear fuel fabrication and examination laboratories, plutonium-handling facilities, reprocessing... | |
| ISO 17874-1:2010 describes requirements concerning devices for remote handling of radioactive materials. The classification of these devices (categories and different designs within a category) and the distribution in the different... | |
| ISO 17874-2:2004 specifies the criteria for the selection, installation and use of a mechanical master-slave manipulator, for remote handling of radiaoactive materials in a nuclear facility. ISO 17874-2:2004 deals only... | |
| ISO 17874-3:2011 specifies the main features of electrical master-slave manipulators intended to be used for nuclear applications. It outlines basic principles which relate to the design features of electrical master-slave... | |
| ISO 17874:2006 defines the main features of power manipulators for use in ionizing radiation fields. It outlines basic principles which relate to the design and testing of power manipulators for... | |
| ISO 17884:2004 applies to searchlights fitted to high-speed craft in accordance with the International Code of Safety for High-Speed Craft [HSC Code, IMO-Resolution MSC.36 (63) Chapter 13]. | |
| ISO 17893:2004 defines terms, and specifies a designation system and a classification system, for steel wire ropes. | |
| ISO 17894:2005 provides a set of mandatory principles, recommended criteria and associated guidance for the development and use of dependable marine programmable electronic systems for shipboard use. It applies to... | |
| ISO 17895:2005 specifies a gas-chromatographic method of quantitatively determining the volatile organic compound (VOC) content (i.e. the content of organic compounds with boiling points up to 250 °C) under standard... | |
| ISO 17899:2004 specifies requirements for marine electric window wipers. It covers the required features, performance, constructional materials and electrical equipment for wiper systems for sea-going vessels where bridge duty is... | |
| ISO 178:2010 specifies a method for determining the flexural properties of rigid and semi-rigid plastics under defined conditions. A standard test specimen is defined, but parameters are included for alternative... | |
| ISO 179-1:2010 specifies a method for determining the Charpy impact strength of plastics under defined conditions. A number of different types of specimen and test configurations are defined. Different test... | |
| ISO 17925:2004 specifies methods of determining the coating mass per unit area by gravimetry and chemical composition on one side-surface of zinc- and/or aluminium-based coatings on steel by means of... | |
| ISO 17932:2011 specifies a method for the determination of the deterioration of bleachability index (DOBI) of crude palm oil and the carotene content of crude or bleached palm oil and... | |
| ISO 1793:2005 specifies the dimensions and characteristics of 16 mm motion-picture film projection reels. | |
| ISO 17949:2013 specifies the conditions and requirements for the recommended placement of the WorldSID 50th percentile male side-impact dummy (WS50), as defined in ISO 15830‑1, ISO 15830‑2, ISO 15830‑3, and... | |
| ISO 1795:2007 specifies a method for the sampling of raw rubber in bales, blocks or packages and further procedures carried out on the samples to prepare test samples for chemical... | |
| ISO 1797-1:2011 specifies shanks for rotary instruments used in dentistry and gives measurement methods for the verification of dimensions. | |
| ISO 1797-3:2013 specifies ceramic shanks of rotary instruments used in dentistry and gives measurement methods for the verification of the dimensions. | |
| ISO 17973:2002 specifies a method for calibrating the kinetic energy scales of Auger electron spectrometers with an uncertainty of 3 eV, for general analytical use in identifying elements at surfaces. | |
| ISO 17974:2002 specifies a method for calibrating the kinetic energy scales of Auger electron spectrometers used for elemental and chemical state analysis at surfaces. It also specifies a calibration schedule... | |
| ISO 1798:2008 specifies a method for determining the strength and deformation properties of flexible cellular materials when a test piece is extended at a constant rate until it breaks. | |
| ISO 17993:2002 specifies a method using high performance liquid chromatography (HPLC) with fluorescence detection for the determination of 15 selected polycyclic aromatic hydrocarbons (PAH) [naphthalene, acenaphthene, phenanthrene, fluoranthene, benzo(a)anthracene, benzo(b)fluoranthene... | |
| ISO 17994:2004 defines an evaluation procedure for comparing two methods intended for the detection or quantification of the same target group or species of microorganisms. ISO 17994:2004 provides the mathematical... | |
| ISO 17995:2005 specifies a method for the detection and semiquantitative enumeration of thermotolerant Campylobacter species. The method can be applied to all kinds of filterable waters. The method can also... | |
| ISO 17997-1|IDF 29-1:2004 specifies a reference method for the indirect determination of the casein-nitrogen content of bovine milk. It can be modified for milk from other species or liquid dairy... | |
| ISO 17997-2|IDF 29-2:2004 specifies a routine method for the direct determination of the casein-nitrogen content of bovine milk. The method can be modified for milk from other species or liquid... | |
| ISO 18054:2004 specifies a method for the determination of irone content in essential oil of orris rhizome (Iris pallida Lam. or Iris germanica L.) using gas chromatography on a... | |
| ISO 18055-1:2004 establishes a classification of photo-grade inkjet papers and films with regard to nomenclature, formats and thickness/grammage. It does not include non-photo-grade media, non-paper/film media, or media intended solely... | |
| ISO 1805:2006 specifies a method of testing the breaking force and knot breaking force of netting yarns for fishing nets. Tests may be carried out in both the dry and... | |
| ISO 18064:2003 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic... | |
| ISO 1806:2002 specifies a method of determining the mesh-breaking force of netting for fishing. Tests may be carried out in both the dry and wet states, but tests in the... | |
| ISO 18073:2004 specifies a method for the determination of tetra- to octa-chlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in waters and waste waters (containing less than 1 % by... | |
| ISO 18084:2011 specifies the main dimensions, tolerances and characteristics of punches and dies for all kinds of tablets. ISO 18084:2011 deals with measures which are relevant for the interchangeability of... | |
| ISO 18096:2013 specifies the equipment and procedures for determining the maximum service temperature for preformed pipe insulation. It is applicable to thermal insulating products. | |
| ISO 18097:2013 specifies the equipment and procedures for determining the maximum service temperature of flat insulation products. It is applicable to thermal insulating products. | |
| ISO 18098:2013 specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions. It is applicable to full-size thermal insulating products and... | |
| ISO 18099:2013 specifies the equipment and procedures for determining the coefficient of linear thermal expansion. It is applicable to thermal insulating products within the temperature range 196 °C to 850... | |
| ISO 18113-1:2009 defines concepts, establishes general principles and specifies essential requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) medical devices. | |
| ISO 18113-2:2009 specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) reagents for professional use. ISO 18113-2:2009 also applies to information supplied by the manufacturer with... | |
| ISO 18113-3:2009 specifies requirements for information supplied by the manufacturer of in vitro dignostic (IVD) instruments for professional use. ISO 18113-3:2009 also applies to apparatus and equipment intended to be... | |
| ISO 18113-4:2009 specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) reagents for self-testing. ISO 18113-4:2009 also applies to information supplied by the manufacturer with calibrators... | |
| ISO 18113-5:2009 specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) instruments for self-testing. ISO 18113-5:2009 also applies to apparatus and equipment intended to be used... | |
| ISO 18114:2003 specifies a method of determining relative sensitivity factors (RSFs) for secondary-ion mass spectrometry (SIMS) from ion-implanted reference materials. The method is applicable to specimens in which the matrix... | |
| ISO 18115 is a vocabulary, published in two parts, which defines terms for surface chemical analysis. ISO 18115-1:2010 covers general terms and those used in spectroscopy while ISO 18115-2:2010 covers... | |
| ISO 18116:2005 gives guidance on methods of mounting and surface treatment for a specimen about to undergo surface chemical analysis. It is intended for the analyst as an aid in... | |
| ISO 18117:2009 gives guidance on the handling of and the containers for specimens submitted for surface chemical analysis. It is intended for the user of surface analysis services as an... | |
| ISO 18118:2004 gives guidance on the measurement and use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials by Auger electron spectroscopy and X-ray photoelectron spectroscopy. | |
| ISO 18132-1:2011 establishes general principles for the accuracy, installation, calibration and verification of automatic tank gauges (ATGs) used for custody transfer measurement of liquefied natural gas (LNG) on board an... | |
| ISO 18132-3:2011 establishes general principles for the accuracy, installation, calibration and verification of automatic tank gauges (ATGs) used for custody transfer measurement of liquefied petroleum and chemical gases on board... | |
| ISO 18132:2008 establishes the general requirements for the specification, installation and calibration/verifica tion testing of automatic level gauges (ALG) used for refrigerated light hydrocarbon fluids, i.e., LNG and LPG, stored... | |
| ISO 18144:2003 specifies a method for the sampling and determination of respirable suspended particles (RSP) and for the estimation of the RSP fraction attributable to environmental tobacco smoke (ETS). This... | |
| ISO 18145:2003 specifies a method for the sampling and determination of nicotine and 3-ethenylpyridine (3-EP) in environmental tobacco smoke (ETS). This method is applicable to personal and area sampling. | |
| ISO 18153:2003 specifies how to assure the metrological traceability of values assigned to calibrators and control materials intended to establish or verify trueness of measurement of the catalytic concentration of... | |
| ISO 18164:2005 specifies methods for measuring rolling resistance, under controlled laboratory conditions, for new pneumatic tyres designed primarily for use on passenger cars, trucks, buses and motorcycles. The relationship between... | |
| ISO 18172-1:2007 specifies minimum requirements concerning material, design, construction and workmanship, manufacturing processes and testing of refillable transportable welded stainless steel gas cylinders, of water capacities from 0,5 l up... | |
| ISO 18172-2:2007 specifies minimum requirements concerning material, design, construction and workmanship, manufacturing processes and testing of refillable transportable welded stainless steel gas cylinders, of water capacities from 0,5 l up... | |
| ISO 18175:2004 describes procedures for evaluating the following performance characteristics of ultrasonic pulse-echo examination instruments: horizontal limit and linearity; vertical limit and linearity; resolution-entry surface and far surface; sensitivity and... | |
| ISO 1817:2011 describes methods of evaluating the resistance of vulcanized and thermoplastic rubbers to the action of liquids by measurement of properties of the rubbers before and after immersion in... | |
| ISO 18185-1:2007 provides a system for the identification and presentation of information about freight container electronic seals. The identification system provides an unambiguous and unique identification of the container seal,... | |
| ISO 18185-2:2007 specifies a freight container seal identification system, with an associated system for verifying the accuracy of use, having: a seal status identification system; a battery status indicator; a... | |
| ISO 18185-3:2006 specifies the minimum environmental characteristics for electronic seals. ISO 18185-3:2006 describes the environmental requirements for the ISO 18185 series, for ISO 10374 (Freight containers -- RF automatic... | |
| ISO 18185-4:2007 specifies requirements for the data protection, device authentication and conformance capabilities of electronic seals for communication to and from a seal and its associated reader. These capabilities include... | |
| ISO 18185-5:2007 specifies the air interface between electronic container seals and Reader/Interrogators of those seals. It is to be used in conjunction with the other parts of ISO 18185. ISO... | |
| ISO 18192‑2:2010 defines a test procedure for spinal nucleus prostheses under the relative angular movement conditions specified by ISO 18192‑1. ISO 18192‑2:2010 is applicable to both lumbar and cervical prostheses. | |
| ISO 18192-1:2011 defines a test procedure for the relative angular movement between articulating components, and specifies the pattern of the applied force, speed and duration of testing, sample configuration and... | |
| ISO 18201:2013 defines a Mission Operations (MO) reference model which provides a common basis for coordinating the development of CCSDS Recommended Standards for MO service specifications and serves as a... | |
| ISO 18202:2013 defines the Mission Operations (MO) Message Abstraction Layer (MAL) in conformance with the service framework specified in CCSDS 520.0-G-3, Mission Operations Services Concept. The MO MAL is a... | |
| ISO 18207:2006 defines a simplified and reliable check procedure of the mechanical coupling devices between light trailers and towing vehicles, covered by ISO 3853 and European regulation (94/20/CE), which specify... | |
| ISO 18213-1:2007 describes procedures for tank calibration and volume determination for nuclear process tanks equipped with pressure-measurement systems for determining liquid content. Specifically, overall guidance is provided for planning a... | |
| ISO 18213-2:2007 presents procedures for standardizing a set of calibration data to a fixed set of reference conditions so as to minimize the effect of variations in ambient conditions that... | |
| ISO 18213-3:2009 presents statistical procedures that can be applied to tank calibration and volume measurement data for nuclear materials accountancy tanks. In particular, ISO 18213-3:2009 presents several diagnostic plots that... | |
| ISO 18213-4:2008 specifies a procedure for making accurate determinations of the liquid height in nuclear-materials-ac countancy tanks that are equipped with pneumatic systems for determining the liquid content. With such... | |
| ISO 18213-5:2008 specifies a procedure for making accurate determinations of liquid height in nuclear-materials-ac countancy tanks that are equipped with pneumatic systems for determining the liquid content. With such systems,... | |
| ISO 18213-6:2008 specifies a procedure for making accurate determinations of the densities of process liquids from in-tank measurements of the liquid content. This procedure is applicable to tanks equipped with... | |
| ISO 18225:2012 specifies general and performance requirements for multilayer pipe systems based on pipes made from thermoplastics and intended to be used for gas supply outdoors. It gives requirements for... | |
| ISO 18232:2006 specifies the encoding and length for globally unique identifiers for data objects used in healthcare exchanged as alphanumeric strings. | |
| ISO 18233:2006 gives guidelines and specifies requirements for the application of new methods for the measurement of the acoustic properties of buildings and building elements. Guidelines and requirements for selection... | |
| ISO 18245:2003 defines code values used to enable the classification of merchants into specific categories based on the type of business, trade or services supplied. Values are specified only for... | |
| ISO 18252|IDF 200:2006 specifies a routine gas liquid chromatographic method for the determination of the sterol composition in anhydrous milk fat extracted from dairy products directly on the unsaponifiable matter,... | |
| ISO 1825:2010 specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling... | |
| ISO 18265:2003 specifies the principles of the conversion of hardness values and gives general information on the use of conversion tables. The conversion tables apply to unalloyed and low-alloy steels... | |
| ISO 18273:2004 specifies requirements for classification of solid wires and rods for fusion welding of aluminium and aluminium alloys. The classification of the solid wires and rods is based on... | |
| ISO 18274:2010 specifies requirements for classification of solid wire electrodes, solid strip electrodes or solid rods for fusion welding of nickel and nickel alloys. The classification of the solid wire... | |
| ISO 18275:2011 specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of high-strength steels... | |
| ISO 18276:2005 specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength steels in the as-welded condition or in the... | |
| ISO 18278-1:2004 recommends procedures for determining the generic weldability for resistance spot, seam and projection welding of metallic materials. This procedure is applicable for the assessment of the weldability of... | |
| ISO 18278-2:2004 specifies a laboratory test procedure for the determination of the acceptable welding current range and the assessment of electrode life using a multi-spot test with specific conditions. ISO... | |
| ISO 1827:2011 specifies methods for the determination of the modulus in shear and the strength of bonds of rubber to metal or other rigid plates, using rubber bonded between four... | |
| ISO 27654:2011 specifies the pressure test method to be applied to resistance-seam-weld ed specimens of different types of materials with single sheet thicknesses ranging from 0,3 mm to 3,2 mm. | |
| ISO/TC 201 Surface chemical analysis | |
| ISO/TC 81 Common names for pesticides and other agrochemicals | |
| IULTCS International Union of Leather Technologists and Chemists Societies | |
| Laboratory glassware -- Narrow-necked boiling flasks | |
| Lays down the basic dimensions of drill rods and the necessary dimensions of the tapered connections. These dimensions shall comply with those given in figure 1 and table 1 and... | |
| Limitation of the scope | |
| May be used as a quality-control test during manufacture and conversion of PVC compounds and for coloured compounds. Is not recommended for compounds in the form of dry blends. Defines... | |
| Measurement of fluid flow in closed conduits - Ultrasonic meters for gas -- Part 2: Meters for industrial applications | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of psychrotrophic microorganisms | |
| Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 2: Levels | |
| Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 3: Theodolites | |
| Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM measurements to reflectors) | |
| Over time, the surface colour of leather and the leather itself change due to ageing and to the action of the surroundings on the leather. The purpose of the various... | |
| Page 2, clause 11: add "11.1" as a sub-clause number at the beginning of the first sentence. Replace the existing sub-clause "11 f)" by "11.2 In addition to 11.1, if... | |
| Page 3, clause 11: add "11.1" as a sub-clause number at the beginning of the first sentence. Replace the existing sub-clause "11 g)" by "11.2 In addition to 11.1, if... | |
| Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees C | |
| Passenger car tyres -- Methods for measuring rolling circumference -- Loaded new tyres | |
| Petroleum and natural gas industries -- Offshore production installations -- Guidelines on tools and techniques for hazard identification and risk assessment | |
| Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test | |
| Plastics -- Determination of Izod impact strength | |
| Precision data | |
| Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 1: Determination of resistance to outward leakage of gases (internal pressure test) | |
| Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test) | |
| Provides rules for the presentation and the position of the contents list of periodicals (see also ISO 8). Cancels and replaces ISO Recommendation R 18-1956, of which it constitutes a... | |
| Requirements specific to high speed crafts | |
| Resistance welding -- Destructive tests on welds in metallic materials -- Torsion test of resistance spot welds | |
| Respiratory protective devices -- Performance requirements -- Part 3: Thread connection | |
| Road vehicles -- Mechanical coupling between tractors and semi-trailers -- Part 1: Interchangeability between tractors and semi-trailers for general cargo | |
| Rubber hoses and hose assemblies -- Part 1: On-shore oil suction and discharge -- Specification | |
| Rubber hoses and hose assemblies -- Part 2: Ship/dockside discharge -- Specification | |
| Sampling of poultry carcasses | |
| Sets out safety rules relating to continuous mechanical handling equipment, including its construction, installation, utilization and maintenance, to ensure that it is used to the best advantage, and to prevent... | |
| Ships and marine technology -- Shipboard plans for fire protection, life-saving appliances and means of escape | |
| Ships and marine technology -- Ships' side scuttles | |
| Soil quality -- Determination of abundance and activity of soil microflora using respiration curves | |
| Specification of a method for the determination of the tendency of plasticisers to migrate from plastics into other materials or other plastics, when they are brought into close contact. A... | |
| Specification of a qualitative method of detecting the presence of free ammonia or other volatile bases in phenol-formaldehyde mouldings by the exposure of an indicator paper to the vapour from... | |
| Specifications for compostable plastics | |
| Specified are the essential dimensions of slides of three internationally used sizes and of the title strip. They are intended to facilitate the manufacture, use and international interchangeability of projector... | |
| Specifies a method of determining the bulk factor of a moulding material from its apparent density in the unmoulded form and its density in the moulded form. Knowledge of the... | |
| Specifies both geometrical and practical tests on these parallel lathes, and gives the corresponding permissible dviations which apply. It deals only with verification of the accuracy of the machine. It... | |
| Specifies four types. Gives measurement methods for the verification of dimensions. Includes quality control requirements. | |
| Specifies the basic characteristics (dimensions, power rating, nominal speed) of motorized driving pulleys for belt conveyors. | |
| Specifies the basic characteristics (geometrical and physical specifications) of the above mentioned types of handling equipment. | |
| Specifies the basic characteristics of oscillating conveyors and shaking or reciprocating feeders of the above mentioned types. Applies to conveyors or feeders with either rectangular or trapezoidal or flat-bottom or... | |
| Specifies the basic dimensions for equipment. Gives a list of components; tabulates together with figures: shank adapters for central flushing, hexagon type and lug-shank type; extension rods; coupling sleeves; four-wing... | |
| Specifies the basic dimensions for equipment. Gives a list of components; tabulates together with figures: size of drill-steel in bar form; lengths of extension rods; coupling sleeves; bit diameters (four-wing... | |
| Specifies the basic principles and limitations which govern operations with fissile materials. Describes general criticality safety criteria for equipment design and for the development of operating controls. Does not cover... | |
| Specifies the connecting dimensions for drill-rods and the shanks of drill-bits. In addition, an example is given for wet drilling. Tabulates dimensions in millimetres and inches; some figures illustrate shapes... | |
| Specifies the dimensions of the stillages in direct contact with the hand-operated elevating trucks: free height, minimum free width. | |
| Specifies the requirements. It is essential that these rings be individually enclosed in sealed envelopes or in pockets in a multiple envelope provided that they can be removed without affecting... | |
| Supply chain applications of RFID -- Returnable transport items (RTIs) and returnable packaging items (RPIs) | |
| TC 138 Plastics pipes, fittings and valves for the transport of fluids // SC 5 | |
| TC 173 Assistive products for persons with disability // SC 3 | |
| TC 79 Light metals and their alloys // SC 7 | |
| TC 8 Ships and marine technology // SC 1 | |
| TC 94 Personal safety -- Protective clothing and equipment // SC 3 | |
| Textile floor coverings -- Determination of thickness of pile above the substrate | |
| Textile floor coverings -- Determination of wool fibre integrity using an abrasion machine | |
| The best scale will be determined by taking into consideration, in particular, the two following contradictory tendencies: a scale with too wide steps involves a waste of materials and an... | |
| The method consists in drying of a test portion, diluted with water and mixed with kieselguhr at 70 °C and at a pressure not exceeding 34 mbar. It is applicable... | |
| The method is applicable to all machine-made textile floor coverings. It forms an integral part of other methods of test for textile floor coverings, and the result of this test... | |
| The method is applicable to alloys not containing cadmium and having zinc contents between 0,10 and 12,0 % (m/m). Specifies principle and procedure of the method, the reagents, apparatus, sampling,... | |
| The method is applicable to alloys not containing cadmium and having zinc contents between 0,10 and 8,0 % (m/m). Specifies principle and procedure of the method, the reagents, apparatus, sampling,... | |
| The method is applicable to the anhydrous product and to the monohydrat. It consists in drying of a test portion at 100 °C and a pressure not exceeding 135 mbar. | |
| The method is applicable to the determination of iron contents up to 0.4 % (m/m) in any of the copper alloys listed in ISO publications. ISO 1812 specifies principle, reagents,... | |
| The method is applicable to the determination of nickel contents up to 2.5 % (m/m). Covers principle, reagents, apparatus, sampling, procedure, expression of results, and test report. | |
| The methods are applicable to the given materials in the form of cast unwrought products (refinery shapes) such as cakes, billets, wire bars and ingots. The methods are intended to... | |
| The methods are applicable to the given materials in the form of wrought products (plate, sheet, strip, rod, bar, tube, profile, forgings, etc.) and castings (sand castings, chill castings, die... | |
| The principle of the method is maintaining a test portion of the PVC at an agreed temperature in a nitrogen gas stream, absorbing the hydrogen chloride evolved in a given... | |
| The purpose of ISO 17874-5:2007 is to provide guidance for the selection, installation and use of manually-operated remote handling tongs within nuclear installations. ISO 17874-5:2007 covers only the specific engineering... | |
| The purpose of ISO 18104:2003 is to establish a nursing reference terminology model consistent with the goals and objectives of other specific health terminology models in order to provide a... | |
| The requirements specify the quality of the material. The different methods of test are specified. They concern the porosity and imperfections of glaze, the resistance to heat and sudden change... | |
| The sled test procedure described in ISO 17373:2005 simulates low-speed rear-end impact resulting in a velocity change of the struck vehicle of 15 km/h. Its main purpose is the evaluation... | |
| The specified method applies to pieces of glass, preferable flat but if necessary curved, but from articles of laboratory glassware. Sample pieces are subjected to an aqueous hydrochloric acid solution,... | |
| The specified requirements deal with a series of inexpensive "commercial" liquid-in-glass thermometers, when great accuracy of measurement is not required. The temperature range covered is from -100 degrees centigrade to... | |
| The specified requirements deal with two series of inexpensive "commercial" liquid-in-glass thermometers, when great accuracy of measurement is not requirend: a series designated A to H, in which nominal ranges... | |
| This International Standard establishes criteria for the purity of photographic-grade 4-(N-ethyl-N-2-methanesulfonyl-a minoethyl)-2-methylp henylenediamine sesquisulfate monohydrate and specifies the test methods to be used to determine the... | |
| This International Standard specifies a microtitration method to measure the degree of unsaturation in polyether polyols used in the production of polyurethanes. It is based on the reaction of mercuric... | |
| Three types of crucibels are specified: Type 1, low form, type 2 medium form and type 3 tall form bases an a height/diameter ratio of 0,63; 0,8 and 1,25 resp. | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 11: Determination of content of respirable particles | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 1: Determination of pH | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 2: Determination of amount of residual monomers | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 3: Determination of particle size distribution by sieve fractionation | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 4: Determination of moisture content by mass loss upon heating | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 5: Gravimetric determination of free swell capacity in saline solution | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 7: Gravimetric determination of absorption under pressure | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 8: Gravimetric determination of flowrate | |
| Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 9: Gravimetric determination of density | |
| Water quality -- Determination of selected nitrophenols -- Method by solid-phase extraction and gas chromatography with mass spectrometric detection | |
| Welding -- Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts -- Terminology | |
| Welding -- Multilingual terms for welded joints with illustrations |
| << Prev | Next >> |