ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Scope This International Standard specifies the essential requirements of snowboard strap bindings for soft boots (see 3.1), hereafter referred to as snowboard bindings. This International Standard is applicable to snowboard... | |
| Acoustics -- Guidelines for noise control by silencers | |
| Acoustics -- Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance | |
| Adhesives -- Durability of structural adhesive joints -- Exposure to humidity and temperature under load | |
| Adhesives -- Evaluation of the effectiveness of surface treatment techniques for aluminium -- Wet-peel test by floating-roller method | |
| Adhesives -- Measurement of adhesion characteristics by a three-point bending method | |
| Aerospace -- Airframe ball bearings, double-row, rigid, diameter series 0 -- Metric series | |
| Aerospace -- Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty -- Inch series | |
| Aerospace -- Airframe ball bearings, double-row, rigid, sealed, heavy duty -- Inch series | |
| Aerospace -- Airframe ball bearings, double-row, self-aligning, diameter series 2 -- Metric series | |
| Aerospace -- Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty -- Inch series | |
| Aerospace -- Airframe ball bearings, double-row, self-aligning, sealed, heavy duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 0 and 2 -- Metric series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 8 and 9 -- Metric series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, light duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra-light duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, sealed, intermediate duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, sealed, light duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, heavy duty -- Inch series | |
| Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, light duty -- Inch series | |
| Aerospace -- Airframe rolling bearings: ball and spherical roller bearings -- Technical specification | |
| Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty -- Inch series | |
| Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty -- Inch series | |
| Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty -- Inch series | |
| Aerospace -- Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 -- Metric series | |
| Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty -- Inch series | |
| Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty -- Inch series | |
| Aerospace -- Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty -- Metric series | |
| Air cargo -- Fire containment covers -- Design, performance and testing requirements | |
| Animal feeding stuffs -- Determination of residues of organochlorine pesticides -- Gas chromatographic method | |
| Animal feeding stuffs -- Determination of residues of organophosphorus pesticides -- Gas chromatographic method | |
| Animal feeding stuffs -- Determination of vitamin A content -- Method using high-performance liquid chromatography | |
| Annex D -- Instrumented Charpy V-notch pendulum impact test of sub-size test pieces | |
| Ball diameter for tip classification | |
| Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions | |
| Blind rivets -- Mechanical testing | |
| Blind rivets -- Terminology and definitions | |
| Cancels and replaces the first edition (1977). Describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing: Method A: Loss of volatiles on heating of... | |
| Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Methods of sampling | |
| Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness | |
| Cleanrooms and associated controlled environments -- Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 | |
| Cleanrooms and associated controlled environments -- Part 4: Design, construction and start-up | |
| Contains a method for the determination of the active aerobic, heterotrophic microbial biomass in aerated agricultural and mineral soils. | |
| Contains table indicating tolerances on holes and shafts as well as on symmetry, gives directions for gauging such as gauging conditions and gauging control, and specifies control methods and corresponding... | |
| Data sheets for thermal turbines for industrial applications | |
| Describes a method for the determination of the fraction of a test portion of pelletized carbon black used in rubber industry that will pass through a sieve with 125 m... | |
| Describes a reference method for the determination of the moisture content of meat and meat products. Replaces the first edition. | |
| Describes an ashing procedure for the determination of the amount of bale coating present on the outside wrapper sheets of bales of natural rubber. Contains also a brushing and scraping... | |
| Diesel engines -- Fuel injection pump testing -- Calibrating fuel injectors | |
| Electronic archiving -- Part 1: Specifications concerning the design and the operation of an information system for electronic information preservation | |
| Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete | |
| Epoxy-coated steel for the reinforcement of concrete | |
| Epoxy-coated strand for the prestressing of concrete | |
| Extruded sheets of impact-modified polystyrene (PS-I) -- Requirements and test methods | |
| Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods | |
| Fibre-reinforced plastic composites -- Determination of apparent interlaminar shear strength by short-beam method | |
| Fibre-reinforced plastic composites -- Determination of compressive properties in the in-plane direction | |
| Fibre-reinforced plastic composites -- Determination of flexural properties | |
| Fibre-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) -- Mechanical properties of ceramic composites at high temperature -- Determination of compression properties | |
| Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies | |
| Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils | |
| Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature | |
| Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or non-conformance with specifications | |
| Gives a method for the determination of microbial biomass of soils by measurement of total extractable organic biomass material mainly from freshly killed microorganisms. It is also applicable to the... | |
| Gives methods for the determination of the chemical composition of pig iron, cast iron and steel. Methods are specified for use with both liquid and solid metal. Replaces ISO 377-2:1989. | |
| Gives the requirements for two classes of single-hole fixing switches for use in nominal 28 V d. c. and 115/200 V three-phase, 400 Hz a.c. systems. Class 1 switches are... | |
| Glass in building -- Determination of energy balance value -- Calculation method | |
| Hydrogen fuel -- Product specification -- Part 1: All applications except proton exchange membrane (PEM) fuel cell for road vehicles | |
| Hydrometric determinations -- Flow measurements in open channels using structures -- Compound gauging structures | |
| IIW International Institute of Welding | |
| Implants for surgery -- Active implantable medical devices -- Part 1: General requirements for safety, marking and for information to be provided by the manufacturer | |
| Implants for surgery -- Wear of total hip-joint prostheses -- Part 2: Methods of measurement | |
| Industrial automation systems -- Concepts and rules for enterprise models | |
| Industrial wire screens -- Technical requirements and testing | |
| ISO 14122-4:2004 applies to all machinery (stationary and mobile) where fixed means of access are necessary. The purpose of the standard is to define the general requirements for safe access... | |
| ISO 14127:2008 specifies methods for calculating the resin, fibre and void contents of a carbon-fibre-reinfor ced composite from the densities of the resin, the fibre and the composite and the... | |
| ISO 14131:2005 specifies test methods for measuring boom steadiness in agricultural field crop sprayers, with the objective of evaluating the stability of the boom and determining its movements. | |
| ISO 14132-5:2008 gives terms and definitions for night vision devices such as binoculars, monoculars and goggles that are used for observation activities at night, rescue actions under low light conditions,... | |
| ISO 14133-1:2006 is applicable to general purpose binoculars, monoculars and spotting scopes. It is not applicable to high performance binoculars, monoculars and spotting scopes, which are specified in ISO 14133-2. | |
| ISO 14133-2:2006 is applicable to high performance binoculars, monoculars and spotting scopes. It is not applicable to general purpose binoculars, monoculars and spotting scopes which are specified in ISO 14133-1. | |
| ISO 14134:2006 applies to astronomical telescopes, including finder telescopes, and to their functional specifications. These specifications are restricted to amateur astronomical telescopes, which should be distinguished from hand-held or mounted... | |
| ISO 14135-1:2003 applies to general-purpose telescopic sights, used on hand-held firearms and airguns. It contains a classification to the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances... | |
| ISO 14135-2:2003 applies to high-performance telescopic sights, used on hand-held firearms and airguns. It contains a classification of the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances... | |
| ISO 14154:2005 describes the gas chromatographic determination of 15 chlorophenols (2,3-, 2,4- 2,5-, 2,6-, 3,4- and 3,5-dichlorophenol; 2,3,4-, 2,3,5-, 2,3,6-, 2,4,5-, 2,4,6- and 3,4,5-trichloropheno l, 2,3,4,5- and 2,3,4,6-tetrachlorop henol and... | |
| ISO 14155:2011 addresses good clinical practice for the design, conduct, recording and reporting of clinical investigations carried out in human subjects to assess the safety or performance of medical devices... | |
| ISO 14156|IDF 172:2001 specifies methods for the extraction or separation of a representative part of the fat, containing lipids and liposoluble compounds, from milk and milk products. The method is... | |
| ISO 14160:2011 specifies requirements for the characterization of a liquid chemical sterilizing agent and for the development, validation, process control and monitoring of sterilization by liquid chemical sterilizing agents of... | |
| ISO 14161:2009 provides guidance for the selection, use and interpretation of results from application of biological indicators when used in the development, validation and routine monitoring of sterilization processes. ISO... | |
| ISO 14168:2011 specifies a method for determining the performance characteristics of copper-base infiltrating powders. | |
| ISO 14171:2010 specifies requirements for the classification of electrode/flux combinations and weld metal in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of non alloy... | |
| ISO 14172:2008 prescribes requirements for the classification of nickel- and nickel-alloy-covered electrodes for manual metal arc welding and overlaying. It includes those compositions in which the nickel content exceeds that... | |
| ISO 14174:2012 specifies requirements for classification of fluxes for submerged arc welding and electroslag welding for joining and overlay welding using wire electrodes, tubular cored electrodes, and strip electrodes. | |
| ISO 14175:2008 specifies requirements for the classification of gases and gas mixtures used in fusion welding and allied processes including, but not limited to: tungsten arc welding (Process 141); gas-shielded... | |
| ISO 14183:2005 specifies a high-performance liquid chromatographic (HPLC) method for the determination of the monensin, narasin and salinomycin contents of animal feeding stuffs, supplements (dry and liquid) and mineral premixtures. | |
| ISO 14184-1:2011 specifies a method for determining the amount of free formaldehyde and formaldehyde extracted partly through hydrolysis by means of a water extraction method. The method can be applied... | |
| ISO 14184-2:2011 specifies a method for determining the amount of formaldehyde released under the conditions of accelerated storage from textiles in any form by means of a vapour absorption method. | |
| ISO 14188:2012 specifies test methods applicable to thermal barrier coatings for measuring thermal cycle resistance by using steady cyclical heating and cooling procedures, and for measuring thermal shock resistance using... | |
| ISO 14223-1:2011 specifies the air interface between the transceiver and the advanced transponder used in the radiofrequency identification of animals, this specification being fully backwards-compatible with those of ISO 11784... | |
| ISO 14223-2:2010 specifies the code and command structure between the transceiver and the advanced transponder used in the radiofrequency identification of animals, this specification being fully backwards-compatible with those of... | |
| ISO 14224:2006 provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural... | |
| ISO 14229-1:2013 specifies data link independent requirements of diagnostic services, which allow a diagnostic tester (client) to control diagnostic functions in an on-vehicle Electronic Control Unit (ECU, server) such as... | |
| ISO 14229-2:2013 specifies data link independent requirements of session layer services. ISO 14229-2:2013 specifies common session layer services to provide independence between unified diagnostic services (ISO 14229-1) and all transport... | |
| ISO 14229-3:2012 specifies the implementation of a common set of unified diagnostic services (UDS) on controller area networks (CAN) in road vehicles (UDSonCAN). It references ISO 14229-1 and ISO 14229-2... | |
| ISO 14229-4:2012 specifies the implementation of a common set of unified diagnostic services (UDS) on FlexRay networks (FR) in road vehicles (UDSonFR). UDSonFR references ISO 14229-1 and ISO 14229-2 and... | |
| ISO 14229-6:2013 specifies the implementation of a common set of unified diagnostic services (UDS) on K-Line (UART based) in road vehicles (UDSonK-Line). UDSonK-Line references ISO 14229 1 and ISO 14229... | |
| ISO 14230-1:2012 specifies the physical layer, based on ISO 9141, on which the diagnostic services will be implemented. It is based on the physical layer described in ISO 9141-2, but... | |
| ISO 14230-2:2013 specifies data link layer services tailored to meet the requirements of UART-based vehicle communication systems on K-Line as specified in ISO 14230-1. It has been defined in accordance... | |
| ISO 14233:2003 gives compositional, performance, user-information, packaging and marking, and testing requirements for polymer-based die materials used in dentistry. It is applicable to die materials having a polymeric matrix as... | |
| ISO 14237:2010 specifies a secondary-ion mass spectrometric method for the determination of boron atomic concentration in single-crystalline silicon using uniformly doped materials calibrated by a certified reference material implanted with... | |
| ISO 14242-1:2012 specifies the relative angular movement between articulating components, the pattern of the applied force, the speed and duration of testing, the sample configuration and the test environment to... | |
| ISO 14242-3:2009 specifies relative angular movement between articulating components, the pattern of the applied force, speed and duration of testing, sample configuration and test environment to be used for the... | |
| ISO 14243‑1:2009 specifies the flexion/extension relative angular movement between articulating components, the pattern of the applied force, speed and duration of testing, sample configuration and test environment to be used... | |
| ISO 14243-2:2009 specifies a method of assessment of wear of the tibial component of total knee-joint prostheses using the gravimetric technique for components tested in accordance with ISO 14243-1. | |
| ISO 14243-3:2004 specifies relative movement between articulating components, the pattern of the applied force, speed and duration of testing, sample configuration and test environment to be used for the wear... | |
| ISO 14245:2005 specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to... | |
| ISO 14253-2:2011 gives guidance on the implementation of the concept of the "Guide to the estimation of uncertainty in measurement" (in short GUM) to be applied in industry for the... | |
| ISO 14253-3:2011 provides guidelines and defines procedures for assisting the customer and supplier to reach amicable agreements on disputed measurement uncertainty statements regulated in accordance with ISO 14253-1, and so... | |
| ISO 14256-2:2005 describes an automated method for the determination of nitrate, nitrite and ammonium in a 1 mol/l potassium chloride extract of field-moist soil samples. ISO 14256-2:2005 is applicable to... | |
| ISO 14268:2012 describes a method for determining the water vapour permeability of leather and provides alternative methods of sample preparation. | |
| ISO 14271:2011 specifies the procedures for the hardness testing of etched cross-sections of resistance spot, projection, and seam welds. The aim of the hardness tests is to determine the Vickers... | |
| ISO 14275 specifies the dimensions of metric internal, offset cruciform, ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm. | |
| ISO 14276 specifies the dimensions of metric internal, offset cruciform drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. | |
| ISO 14277 specifies the dimensions of metric ribbed drivers which are inserted into internal offset cruciform ribbed or unribbed drives used in metric screws in the nominal thread diameter range... | |
| ISO 14278 specifies the dimensions of metric gauges which check internal offset cruciform drives, ribbed or unribbed, used in metric screws in the nominal thread diameter range of 1,6 mm... | |
| ISO 14279 specifies the dimensions of metric internal cruciform drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. | |
| ISO 14280 specifies the dimensions of metric ribbed drivers which are inserted into internal cruciform ribbed or unribbed drives used in metric screws in the nominal thread diameter range of... | |
| ISO 14281 specifies the dimensions of metric gauges which check internal cruciform drives, ribbed or unribbed, used in metric screws in the nominal thread diameter range of 1,6 mm to... | |
| ISO 14287:2012 specifies requirements for materials based on metals, polymers, back metals and pivots for the manufacture of tilting pad bearings. | |
| ISO 14289-1:2012 specifies how to use ISO 32000-1 (PDF/UA-1) to produce accessible electronic documents. ISO 14289-1:2012 is not applicable to: specific processes for converting paper or electronic documents to the... | |
| ISO 14291:2012 defines terms relevant to quadrupole mass spectrometers (QMSs) and specifies the parameters required for specification by QMS manufacturers necessary for proper calibration and for maintaining the quality of... | |
| ISO 14298:2013 specifies requirements for a security printing management system for security printers. ISO 14298:2013 specifies a minimum set of security printing management system requirements. Organizations ensure that customer security... | |
| ISO 14300-1:2011 addresses the space programme/project management requirements, applicable through a top-down approach in a contractual relationship between customers and suppliers. The applicable requirements for product assurance are given in... | |
| ISO 14300-2:2011 defines the product assurance (PA) policy, objectives, principles, and requirements for the establishment and implementation of PA programmes for space programmes covering mission definition, design, development, production and... | |
| ISO 14302:2002 establishes performance requirements for the purpose of ensuring space systems electromagnetic compatibility (EMC). The engineering issues to be addressed in order to achieve system-level EMC are identified herein,... | |
| ISO 14303 specifies the interfaces between a launch vehicle (LV) and the spacecraft (SC) being launched, to provide LV and SC organizations with the necessary format for presenting the required... | |
| ISO 14306:2012 provides the description of the structure and content for a binary file having the extension of .jt. A binary file with the .jt extension is generally referred to... | |
| ISO 14309:2011 specifies a method for the determination of the volume and the surface resistivity of vulcanized or thermoplastic rubbers. The method can be applied to materials with a resistivity... | |
| ISO 1431-1:2012 specifies procedures intended for use in estimating the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under static or dynamic tensile strain, to air containing a... | |
| ISO 14310:2008 provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas industry. ISO 14310:2008 provides requirements for the functional... | |
| ISO 14313:2007 specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of... | |
| ISO 14314:2004 specifies the safety requirements for RIC engine re-coil starting equipment intended for use on reciprocating internal combustion engines for land, rail and marine use, excluding engines intended for... | |
| ISO 14317:2006 specifies a method for the determination of the compressive yield strength of sintered metal materials, excluding hardmetals. This method is applicable to sintered materials, excluding hardmetals, that may... | |
| ISO 14323:2006 covers destructive testing of welds. ISO 14323:2006 specifies specimen dimensions and testing procedures for impact shear and cross-tension testing of spot and embossed projection welds in overlapping sheets,... | |
| ISO 14324:2003 specifies test specimens and procedures for fatigue testing spot welds, at ambient conditions, under repeated tensile loading to produce either shear or cross-tension loading of the spot weld,... | |
| ISO 14327:2004 specifies procedures for determining the weldability lobe for producing quality welds. The tests are used in particular to determine the weldability lobe for coated/uncoated steels, stainless steels and... | |
| ISO 14329:2003 specifies the definitions of the geometric measurements and fracture types to be used in relation to the testing of resistance spot, projection and seam welds in which different... | |
| ISO 1432:2013 specifies a static procedure, known as the Gehman test, for determining the relative stiffness characteristics of vulcanized or thermoplastic rubbers over a temperature range from room temperature to... | |
| ISO 14341:2010 specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non... | |
| ISO 14343:2009 specifies requirements for classification of wire electrodes, strip electrodes, wires and rods for gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, electroslag... | |
| ISO 14344:2010 specifies tools for communication between a purchaser and a supplier of welding consumables within quality systems, such as those based upon ISO 9001. In production, the components of... | |
| ISO 14346:2013 gives guidelines for the design and analysis of welded uniplanar and multiplanar joints in lattice structures composed of circular (CHS), square (SHS) or rectangular (RHS) hollow sections, and... | |
| ISO 14347:2008 gives recommendations for the design and analysis of unstiffened, welded, nodal joints in braced structures composed of hollow sections of circular or square shape (with or without rectangular... | |
| ISO 14356:2002 specifies requirements and tests for the duplicating materials used in dentistry which are primarily intended for forming flexible moulds needed to produce positive refractory investment copies of properly... | |
| ISO 14368-2:2002 specifies dimensional requirements of the interface for the assembly to the case by adhesive or using a gasket for round-shaped mineral and sapphire watch-glasses. | |
| ISO 14368-3:2003 specifies the nomenclature of defects and the test methods to check them, with minimum physical and aesthetic requirements, for circular mineral and sapphire watch-glasses. | |
| ISO 1436:2009 specifies requirements for six types of wire-braid-reinforce d hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS),... | |
| ISO 14372:2011 specifies a method for the relative ranking, by 24 h exposure to humid air and subsequent diffusible hydrogen testing, of manual metal arc electrode coatings related to their... | |
| ISO 14373:2006 specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the... | |
| ISO 14377|IDF 168:2002 specifies a graphite furnace atomic absorption spectrometric method for the determination of the tin content of (sterilized) canned evaporated milk. It is applicable to samples with tin... | |
| ISO 14378|IDF 167:2009 specifies a high-performance liquid chromatographic (HPLC) method for the determination of the iodide content of pasteurized whole milk and dried skimmed milk, when present at levels from... | |
| ISO 1437:2007 specifies a method for determining the water-wash sieve residue from regular, untreated carbon black for the rubber industry. It may not be applicable to oil-treated blacks because the... | |
| ISO 14380:2011 specifies a method for the determination of the lethal effects of toxicants to Thamnocephalus platyurus test organisms after 24 h exposure. A second method (rapid test) is described... | |
| ISO 1438:2008 defines the requirements for the use of rectangular and triangular (V-notch) thin-plate weirs for the measurement of flow of clear water in open channels under free flow conditions. | |
| ISO 14396 specifies the additional and method requirements for determining the power of reciprocating internal combustion (RIC) engines when presented for an exhaust emission test in accordance with ISO 8178,... | |
| ISO 14397-1:2007 specifies the means for determining the rated operating capacity of wheeled or crawler loaders or of the loader portion of backhoe loaders, having buckets and material handling forks,... | |
| ISO 14397-2:2007 specifies a test method for measuring the breakout forces and lift capacity to maximum lift height of wheeled or crawler loaders, or of the loader portion of backhoe... | |
| ISO 14400:2005 specifies requirements for the use, and general maintenance and safety of wheels and rims, and defines their out-of-service conditions, such as cracked, worn and bent wheels. It is... | |
| ISO 14401-1:2009 specifies a static test method for determining the field of vision provided by surveillance and rear-view mirrors fitted to earth-moving machinery as defined in ISO 6165. | |
| ISO 14401-2:2009 specifies criteria for the field‑of‑vision performance of surveillance and rear-view mirrors on earth-moving machinery. | |
| ISO 14403-1:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations from 2 µg/l to... | |
| ISO 14403-2:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations usually from 2 µg/l... | |
| ISO 14404-1:2013 specifies calculation methods for the carbon dioxide (CO2) intensity of plant where steel is produced through a blast furnace. It includes boundary definition, material and energy... | |
| ISO 14404-2:2013 specifies calculation methods which companies using EAF to manufacture steel can use to evaluate the total annual carbon dioxide (CO2) emissions and the emission factor of... | |
| ISO 14405-1:2010 establishes the default specification operator for linear size and defines a number of special specification operators for linear size for feature of size types “cylinder” and “two parallel... | |
| ISO 14405-2:2011 illustrates the use of geometrical tolerancing for dimensions that are not linear sizes to avoid the ambiguity that the use of ± tolerances on these dimensions causes. Both... | |
| ISO 14406:2010 specifies the basic terminology for GPS extraction. It defines a framework for the fundamental operations used in GPS extraction and introduces the concepts of sampling and reconstruction for... | |
| ISO 14408:2005 specifies marking, labelling and information supplied by the manufacturer for cuffed and uncuffed tracheal tubes and related materials designed to resist ignition by a laser. | |
| ISO 14409:2011 specifies the terms and definitions, classification, materials and dimensions, test items and methods for air bags to be used for launching a vessel. It also specifies issues such... | |
| ISO 14416:2003 is applicable to the binding of books, periodicals and archive documents which have special requirements for durability and permanence. The use, as well as the wear and tear,... | |
| ISO 14419:2010 is applicable to the evaluation of a substrate's resistance to absorption of a selected series of liquid hydrocarbons of different surface tensions. ISO 14419:2010 is intended to provide... | |
| ISO 14420:2005 specifies a method to determine the coefficient of linear thermal expansion of carbonaceous or graphite materials (solid materials) for the production of aluminium between 20 °C and 300... | |
| ISO 14427:2004 describes the preparation of unbaked test specimens made by compacting carbonaceous ramming pastes. It also includes a method for the determination of the apparent density after compaction. | |
| ISO 14428:2005 specifies the determination of expansion/shrinkage during baking of cold and tepid ramming pastes used in the production of aluminium. | |
| ISO 14435:2005 applies to carbonaceous materials for the production of aluminium. ISO 14435:2005 describes a test method which covers the analysis for commonly determined trace metals in test specimens of... | |
| ISO 14436:2010 describes the specification and preparation of standard tap water, of conductivity between 40 mS/m and 150 mS/m, for drainability measurements. ISO 14436:2010 is applicable to all kinds of... | |
| ISO 14442:2006 provides procedures, not covered by the methods described in ISO 8692 and ISO 10253, for testing difficult substances for inhibition of algal growth. The main subjects covered by... | |
| ISO 14451-10:2013 specifies the types and order of tests to be applied to the semi finished products and sets out the acceptance criteria and means of categorization. ISO 14451-10:2013 applies... | |
| ISO 14451-1:2013 establishes a terminology related to test methods and requirements for pyrotechnic articles for vehicles. | |
| ISO 14451-2:2013 establishes uniform test methods for pyrotechnic articles for vehicles. | |
| ISO 14451-4:2013 specifies the types and order of tests to be applied to micro gas generators and sets out the associated acceptance criteria and means of categorization. ISO 14451-4:2013 applies... | |
| ISO 14451-5:2013 specifies the types and order of tests for application to the airbag gas generators and sets out the acceptance criteria and means of categorization. ISO 14451-5:2013 applies to... | |
| ISO 14451-7:2013 specifies the types and order of tests to be applied to the seatbelt pretensioners and sets out the associated acceptance criteria and means of categorization. ISO 14451-7:2013 applies... | |
| ISO 14451-8:2013 specifies the types and order of tests to be applied to the igniter and sets out the acceptance criteria and means of categorization. ISO 14451-8:2013 applies to type... | |
| ISO 14451-9:2013 specifies the types and order of tests to be applied to the actuators and sets out the associated acceptance criteria and means of categorization. ISO 14451-9:2013 applies to... | |
| ISO 14454-3:2013 specifies labelling requirements for pyrotechnic articles for vehicles. | |
| ISO 14457:2012 is applicable to handpieces and motors used in dentistry for patient contact, regardless of their construction. It specifies requirements, test methods, manufacturer's information, marking and packaging. ISO 14457:2012... | |
| ISO 14461-1|IDF 169-1:2005 describes a procedure for testing the performance of the colony-count technique within a laboratory by establishing the within-laboratory variability of its technique and identifying those steps that... | |
| ISO 14461-2|IDF 169-2:2005 describes a routine procedure for the evaluation of results of the enumeration of microorganisms using colony-count methods with subsequent 10-fold dilution steps and one plate or two... | |
| ISO 14469-1:2004 specifies CNG refuelling nozzles and receptacles constructed entirely of new and unused parts and materials, for road vehicles powered by compressed natural gas. A CNG refuelling connector consists... | |
| ISO 14469-2:2007 applies to compressed natural gas (CNG) vehicle nozzles and receptacles, constructed entirely of new, unused parts and materials for which there is a demand, in particular for large... | |
| ISO 14469-3:2006 applies to compressed natural gas (CNG) vehicle nozzles and receptacles constructed entirely of new, unused parts and materials. CNG fuelling connection nozzles consist of the following components, as... | |
| ISO 14470:2011 specifies requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food, and establishes guidelines for meeting the... | |
| ISO 14484:2013 provides general principles for the verification and assessment of the performance of concrete structures with the applications of different fibre-reinforced polymer (FRP) systems varying from internal FRP reinforcements/tendo... | |
| ISO 14486:2012 specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification... | |
| ISO 14488:2007 specifies methods for obtaining a test sample from a defined bulk of particulate material (powder, paste, suspension or dust) that can be considered to be representative of that... | |
| ISO 14490-1:2005 specifies the test methods for the determination of the following basic characteristics of telescopic systems and observational telescopic instruments: angular magnification; entrance pupil diameter; exit pupil diameter and... | |
| ISO 14490-2:2005 is applicable to binocular telescopic systems and specifies the test methods for determination of the following characteristics: non-parallelism of the axes of bundles of rays emergent from the... | |
| ISO 14490-3:2004 specifies test equipment and test procedures for the determination of the following optical characteristics of telescopic sights: axial parallax; parallax; eye relief range; reticle tracking. | |
| ISO 14490-4:2005 is applicable to amateur astronomical telescopes. For general optical test methods of telescopic systems see ISO 14490-1. | |
| ISO 14490-5:2005 specifies the test methods for the determination of the transmittance of telescopic systems and observational telescopic instruments. | |
| ISO 14490-6:2005 specifies the test methods for the determination of the veiling glare index of telescopic systems and observational telescopic instruments. | |
| ISO 14490-7:2005 specifies the test methods for the determination of the limit of resolution of telescopic systems and observational telescopic instruments. | |
| ISO 14490-8:2011 describes test methods for determining the performance of night-vision devices as specified in ISO 21094. | |
| ISO 14500:2003 defines terms related to harnesses for Jacquard weaving machines used in the textile industry, with the aim of presenting a standardized, prescribed phraseology. It identifies the parts of,... | |
| ISO 14501│IDF 171:2007 specifies a method for the determination of aflatoxin M1 content in milk and milk powder. The limit of detection is 0,08 µg/kg for whole milk powder,... | |
| ISO 14502-1:2005 specifies a method for the determination of the total polyphenol content of leaf teas and instant teas by a colorimetric assay using Folin-Ciocalteu phenol reagent. It is applicable... | |
| ISO 14502-2:2005 specifies a high-performance liquid chromatographic (HPLC) method for the determination of the total catechin content of tea from the summation of the individual catechins. It is applicable to... | |
| ISO 14505-2:2006 provides guidelines for the assessment of the thermal conditions inside a vehicle compartment. It can also be applied to other confined spaces with asymmetric climatic conditions. It is... | |
| ISO 14505-3:2006 gives guidelines and specifies a standard test method for the assessment, using human subjects, of thermal comfort in vehicles. It is not restricted to any particular vehicle but... | |
| ISO 14507:2003 specifies three methods for the pretreatment of soil samples in the laboratory prior to the determination of organic contaminants: if volatile organic compounds are to be measured; if... | |
| ISO 14509-1:2008 specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of... | |
| ISO 14509-2:2006 specifies the procedures to assess the maximum sound emission of powered mono-hull recreational craft of up to 24 m length according to one of the two alternative methods... | |
| ISO 14509-3:2009 specifies the procedures for assessing sound emission of powered monohull recreational craft of length up to 24 m with a Froude number greater than 1,1. It is not... | |
| ISO 14513:2006 specifies a test method to simulate the head impact of an adult pedestrian to the bonnet top of passenger vehicles or light truck vehicles of up to 3,5... | |
| ISO 14518:2005 establishes a) methods for composition and measurement of test loads; b) procedures for the application of test loads during the testing of cranes. ISO 14518:2005 was developed in... | |
| ISO 1452-1:2009 specifies the general aspects of unplasticized poly(vinyl chloride) (PVC‑U) solid-wall piping systems intended for water supply and for buried and above ground drainage and sewerage under pressure. In... | |
| ISO 1452-2:2009 specifies the characteristics of solid-wall pipes made from unplasticized poly(vinyl chloride) (PVC‑U) for piping systems intended for water supply and for buried and above ground drainage and sewerage... | |
| ISO 1452-3:2009 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC‑U) for piping systems intended for water supply and for buried and above ground drainage and sewerage under... | |
| ISO 1452-4:2009 specifies the characteristics of valves made from unplasticized poly(vinyl chloride) (PVC‑U) for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. | |
| ISO 1452-5:2009 specifies the characteristics for the fitness for purpose of unplasticized poly(vinyl chloride) (PVC‑U) piping systems intended for water supply and for buried and above-ground drainage and sewerage under... | |
| ISO 14520-10:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 23 extinguishant. | |
| ISO 14520-11:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 236fa extinguishant. | |
| ISO 14520-12:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the IG-01 extinguishant. | |
| ISO 14520-13:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the IG-100 extinguishant. | |
| ISO 14520-14:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the IG-55 extinguishant. | |
| ISO 14520-15:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the IG-541 extinguishant. | |
| ISO 14520-1:2005 specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gaseous fire fighting systems in buildings, plant or other structures, and the characteristics of... | |
| ISO 14520-2:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the CF3I extinguishant. It includes details of physical properties, specification, usage and safety aspects and is... | |
| ISO 14520-5:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to theFK-5-1-12 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems... | |
| ISO 14520-6:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HCFC Blend A extinguishant. It includes details of physical properties, specification, usage and safety aspects and is... | |
| ISO 14520-8:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 125 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable... | |
| ISO 14520-9:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 227ea extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable... | |
| ISO 14524:2009 specifies methods for the measurement of opto-electronic conversion functions (OECFs) of electronic still-picture cameras whose output is encoded as a digital image file. The OECF is defined as... | |
| ISO 14531-1:2002 specifies the physical properties and mechanical-performan ce requirements for crosslinked polyethylene (PE-X) pipes intended for use in the supply of gaseous fuels. In addition, it lays down dimensional... | |
| ISO 14531-2:2004 specifies the physical properties and mechanical performance requirements of crosslinked polyethylene (PE-X) and polyethylene (PE) socket, saddle and spigot fittings for the connection by socket or saddle heat-fusion... | |
| ISO 14531-3:2010 specifies the physical properties and mechanical-performan ce requirements for full-end-load-resist ant mechanical fittings for use in the connection of crosslinked polyethylene (PE‑X) pipes conforming to ISO 14531‑1 and... | |
| ISO 14531-4:2006 provides guidance for the design, construction, installation and on-site testing of PE-X pipeline systems. The standard deals with trenchless and open-trench installation methods. ISO 14531-4:2006, when used in... | |
| ISO 14533-1:2012 specifies the elements, among those defined in CMS Advanced Electronic Signatures (CAdES), that enable verification of a digital signature over a long period of time. ISO 14533-1:2012 does... | |
| ISO 14533-2:2012 specifies the elements, among those defined in XML Advanced Electronic Signatures (XAdES), that enable verification of a digital signature over a long period of time. ISO 14533-2:2012 does... | |
| ISO 14534:2011 specifies safety and performance requirements for contact lenses, contact lens care products, and other accessories for contact lenses. ISO 14534:2011 does not specify electrical safety and electromagnetic compatibility... | |
| ISO 14540:2013 specifies dimensional and performance requirements for hydraulic screw-to-connect quick-action couplings designed to be used at pressure of 72 MPa (720 bar) in static conditions as an interface between... | |
| ISO 14541:2013 specifies the dimensional and performance requirements for hydraulic screw-to-connect quick-action couplings for general use. | |
| ISO 14551-6:2013 specifies the types and order of tests for application to the airbag modules and sets out the acceptance criteria and means of categorization. ISO 14551-6:2013 applies to type... | |
| ISO 14555:2006 covers arc stud welding of metallic materials subject to static and dynamic loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality... | |
| ISO 14560:2004 specifies, for quality levels expressed as nonconforming items per million items, procedures for estimating the quality level of a single entity (e.g. a lot) and, when the production... | |
| ISO 1456:2009 specifies requirements for decorative nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium coatings that are applied to iron, steel, zinc alloys, copper and... | |
| ISO 14572:2011 specifies test methods and requirements for basic- and high-performance round, single- or multi-core sheathed cables intended for use in road vehicle applications where the nominal system voltage is... | |
| ISO 14574:2013 specifies the conditions for determination of tensile properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2 000 °C. ISO 14574:2013 applies to... | |
| ISO 14577-1 specifies the method of instrumented indentation test for the determination of hardness and other materials parameters for the three ranges: macro (test force between 2 N and 30... | |
| ISO 14577-2 specifies the method of verification and calibration of testing machines for carrying out the instrumented test in accordance with ISO 14577-1. It describes a direct verification method for... | |
| ISO 14577-3 specifies a method for the calibration of reference blocks to be used for the indirect verification of testing machines for the instrumented indentation test, as specified in ISO... | |
| ISO 14577-4:2007 specifies a method for testing coatings that is particularly suitable for testing in the nano/micro range applicable to thin coatings. This test method is limited to the examination... | |
| ISO 14579:2011 specifies the characteristics of hexalobular socket head cap screws, with thread sizes from M2 up to and including M20, of product grade A. | |
| ISO 14580:2011 specifies the characteristics of hexalobular socket cheese head screws of product grade A and with thread sizes from M2 up to and including M10. | |
| ISO 14583:2011 specifies the characteristics of hexalobular socket pan head screws of product grade A and with thread sizes from M2 up to and including M10. | |
| ISO 14584:2011 specifies the characteristics of hexalobular socket raised countersunk head screws of product grade A, and with thread sizes from M2 up to and including M10. | |
| ISO 14585:2011 specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive. If, in special cases, specifications other than those listed in... | |
| ISO 14586:2011 specifies the characteristics of hexalobular socket countersunk head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive. If, in special cases, specifications other than those listed in... | |
| ISO 14587:2011 specifies the characteristics of hexalobular socket raised countersunk (oval) head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive. If, in special cases, specifications other than those... | |
| ISO 14590:2005 applies to killed cold-reduced steel sheet of two types that are commercially available in the world. Type 1 (Table 1) represents steels that are produced to mechanical properties... | |
| ISO 14592-1:2002 specifies a test method for evaluating the biodegradability of organic test compounds by aerobic microorganisms in surface waters by means of a shake-flask batch test with suspended biomass. | |
| ISO 14592-2:2002 specifies a method for evaluating the biodegradability of organic test compounds by aerobic microorganisms in natural waters by means of a continuous flow river model with attached biomass. | |
| ISO 14594:2003 gives the general guidelines for the determination of experimental parameters relating to the primary beam, the wavelength spectrometer and the sample that need to be taken into account... | |
| ISO 14595:2003 has been developed to facilitate international exchange and compatibility of analysis data in electron probe microanalysis (EPMA). It gives guidance on evaluating and selecting reference materials (RMs), on... | |
| ISO 14596:2007 specifies a method for the determination of the sulfur content of liquid petroleum products, additives for petroleum products, and semi-solid and solid petroleum products that are either liquefied... | |
| ISO 14602:2010 specifies particular requirements for non-active surgical Implants for osteosynthesis, referred to as implants. In addition to ISO 14630, ISO 14602:2010 gives particular requirements for intended performance, design attributes,... | |
| ISO 14603:2012 describes a test method for the determination of open-hole tensile strengths of ceramic matrix composite materials with continuous fibre reinforcement at room temperature. This method applies to all... | |
| ISO 14604:2012 describes a method of measuring the fracture strain of ceramic coatings by means of uniaxial tension or compression tests coupled with acoustic emission to monitor the onset of... | |
| ISO 14607:2007 specifies particular requirements for mammary implants for clinical practice. With regard to safety, ISO 14607:2007 specifies requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization, packaging... | |
| ISO 14610: 2012 describes a test method for determining the flexural strength of porous fine ceramics in air at room temperature. | |
| ISO 14617-13:2004 specifies graphical symbols in diagrams for casting machines and machine tools. | |
| ISO 14617-14:2004 specifies graphical symbols in diagrams for components and devices for material transport and handling. | |
| ISO 14617-15:2002 specifies graphical symbols for use on installation diagrams (e.g. for buildings) and network maps, supplementing the symbols specified in ISO 14617-2 to ISO 14617-12. Symbols on such diagrams... | |
| ISO 14617-1:2005 serves as an introduction to all the other parts of ISO 14617. In particular, it gives information on the creation and use of registration numbers for identifying graphical... | |
| ISO 14619:2003 specifies the procedure for preparing and carrying out space experiments and processing the resulting data, and applies to both manned and unmanned space systems, excluding exploratory rockets with... | |
| ISO 1461:2009 specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not... | |
| ISO 14620-1:2002 defines the safety programme and the technical safety requirements that are implemented in order to comply with the safety policy as defined in ISO 14300-2. It is intended... | |
| ISO 14620-3:2005 sets out the minimum requirements for Flight Safety Systems, including flight termination systems (externally controlled system or on-board automatic system), tracking systems, and telemetry data transmitting systems for... | |
| ISO 14620:2011 specifies requirements for the safety liabilities of countries undertaking space activities or allowing operators to perform space activities on or from their territory under outer space treaties adopted... | |
| ISO 14621-1:2003 addresses the preferred program elements recommended for EEE parts. ISO 14621-1:2003 is written in general terms as a baseline for developing and implementing a parts program. | |
| ISO 14621-2:2003 establishes technical guidelines for developing and documenting an electrical, electronic and electromechanical (EEE) parts control program, in order to assure that the parts used in the flight hardware... | |
| ISO 14623:2003, based on general space experience and practice, specifies general and detailed requirements for metallic pressure vessels, composite overwrapped pressure vessels with metallic liners and metallic pressurized structures used... | |
| ISO 14624-1:2003 specifies a method for the determination of the flammability of aerospace materials by upward flame propagation. Specifically, this test determines if a material, when exposed to a standard... | |
| ISO 14624-2:2003 specifies two test methods for determining the flammability of electrical-wire insulation and accessory materials by exposure to an external ignition source in a static environment (Test A) and... | |
| ISO 14624-3:2005 specifies a method for determining the identity and quantity of volatile offgassed products from materials and assembled articles utilized in manned, pressurized spacecraft. This test method is not... | |
| ISO 14624-4:2003 specifies a test method for determining the flammability of aerospace materials in pressurized gaseous oxygen (GOX) and oxygen-enriched environments, at ambient temperature. This method may also be used... | |
| ISO 14624-5:2006 specifies test equipment and techniques used to identify interactions resulting from exposure of a material to an aerospace fluid. ISO 14624-5:2006 may be used to determine the reactivity... | |
| ISO 14624-6:2006 specifies test equipment and techniques used to identify interactions resulting from exposure of a material to an aerospace fluid. ISO 14624-6:2006 can be used to determine the reactivity... | |
| ISO 14624-7:2006 specifies test equipment and techniques used to identify interactions resulting from exposure of a material to an aerospace fluid. ISO 14624-7:2006 can be used to determine the reactivity... | |
| ISO 14625:2007 specifies the general characteristics, performance, design, test, safety, reliability, maintainability and quality requirements for ground support equipment (GSE) and systems intended for use at launch, landing or retrieval-site... | |
| ISO 14627:2012 describes a test method that covers the determination of fracture resistance of silicon nitride bearing balls at room temperature by the indentation fracture (IF) method, as specified in... | |
| ISO 14628:2012 specifies a test method for rolling contact fatigue of silicon nitride ceramics under stepwise loading that is carried out at room temperature. This test may be used as... | |
| ISO 14629:2012 specifies a test method to determine the flowability of granulated or ungranulated ceramic powders by means of a specified funnel. The method is applicable only to powders which... | |
| ISO 14630:2012 specifies general requirements for non-active surgical implants. ISO 14630:2012 is not applicable to dental implants, dental restorative materials, transendodontic and transradicular implants, intra-ocular lenses and implants utilizing viable... | |
| ISO 14635-2:2004 specifies a test method based on an FZG four-square test machine for determining the relative load-carrying capacity of high EP oils defined by the gear surface damage known... | |
| ISO 14635-3:2005 specifies a test method based on an FZG four-square test machine for determining the relative load-carrying capacity of semi-fluid gear greases defined by the gear surface damage known... | |
| ISO 14637|IDF 195:2004 specifies an enzymatic method for the determination of the urea content of milk by measurement of the difference in pH. | |
| ISO 1463:2002 describes a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatings, by the microscopical examination of cross-sections using... | |
| ISO 14644-10:2012 defines the classification system for cleanliness of surfaces in cleanrooms with regard to the presence of chemical compounds or elements (including molecules, ions, atoms and particles). It is... | |
| ISO 14644-3:2005 specifies test methods for designated classification of airborne particulate cleanliness and for characterizing the performance of cleanrooms and clean zones. Performance tests are specified for two types of... | |
| ISO 14644-5:2004 specifies basic requirements for cleanroom operations. It is intended for those planning to use and operate a cleanroom. Aspects of safety that have no direct bearing on contamination... | |
| ISO 14644-6:2007 establishes a vocabulary of terms and definitions related to cleanrooms and associated controlled environments. | |
| ISO 14644-7:2004 specifies the minimum requirements for the design, construction, installation, test and approval of separative devices, in those respects where they differ from cleanrooms as described in ISO 14644-4... | |
| ISO 14644-8:2013 establishes the classification of air chemical cleanliness (ACC) in cleanrooms and associated controlled environments, in terms of airborne concentrations of specific chemical substances (individual, group or category) and... | |
| ISO 14644-9:2012 establishes the classification of cleanliness levels on solid surfaces by particle concentration in cleanrooms and associated controlled environment applications. Recommendations on testing and measuring methods, as well as... | |
| ISO 14649-10:2004 specifies the process data which is generally needed for NC-machining and therefore common to several machining technologies. These data elements describe the interface between the programming system (i.e. | |
| ISO 14649-111:2010 specifies the data elements describing cutting tool data for milling machine tools and machining centres, which work together with the process data for milling machine tools and machining... | |
| ISO 14649-11:2004 specifies the technology-specific data elements needed as process data for milling. Together with the general process data described in ISO 14649-10, it describes the interface between a computerized... | |
| ISO 14649-121:2005 specifies the data elements describing cutting tool data for turning machine tools and machining centres. They work together with ISO 14649-12, the process data for turning machine tools... | |
| ISO 14649-12:2005 specifies the technology-specific data elements needed as process data for turning. Together with the general process data described in ISO 14649-10, it describes the interface between a computerized... | |
| ISO 14649-13:2013 specifies the technology-specific data element needed as process data for wire-EDM. Together with the general process data described in ISO 14649‑10, it describes the interface between computerized numerical... | |
| ISO 14649-14:2013 specifies the technology-specific data element needed as process data for sink-EDM. Together with the general process data described in ISO 14649‑10, it describes the interface between computerized numerical... | |
| ISO 14649-1:2003 provides an introduction and overview of a data model for Computerized Numerical Controllers and explains its advantages and basic principle, based on the concepts of Product Data. | |
| ISO 14657:2005 specifies requirements for hot-dip zinc (galvanized) coating on steel reinforcing bars, wire and welded fabric used in the reinforcement of concrete. It specifies three classes, class A, class... | |
| ISO 14673-1|IDF 189-1:2004 specifies a method for the determination of the nitrate and nitrite contents of milk and milk products by cadmium reduction and spectrometry. The method is applicable to:... | |
| ISO 14673-2|IDF 189-2:2004 specifies a routine method for the determination of the nitrate and nitrite contents of milk and milk products by segmented flow analysis. The method is applicable to... | |
| ISO 14673-3|IDF 189-3:2004 specifies a routine method for the determination of the nitrate and nitrite contents of milk and milk products by cadmium reduction and flow injection analysis (FIA). The... | |
| ISO 14674|IDF 190:2005 specifies a method for the determination of the aflatoxin M1 (AFM1) content of milk and milk powder by a method including a clean-up step using immunoaffinity... | |
| ISO 14675|IDF186:2002 give guidelines on the use of screening methods used for the determination of aflatoxin M1 content in milk and milk products, based upon competitive enzyme immuno-assays. For... | |
| ISO 14678:2005 describes seven methods for the assessment of the flow characteristics of adhesives after application at room temperature and during cure, by the measurement of sagging. These methods may... | |
| ISO 14683:2007 deals with simplified methods for determining heat flows through linear thermal bridges which occur at junctions of building elements. ISO 14683:2007 specifies requirements relating to thermal bridge catalogues... | |
| ISO 14686:2003 describes the factors to be considered and the measurements to be made when designing and performing a pumping test, in addition to a set of guidelines for field... | |
| ISO 14687-2:2012 specifies the quality characteristics of hydrogen fuel in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road... | |
| ISO 14688-1, together with ISO 14688-2, establishes the basic principles for the identification and classification of soils on the basis of those material and mass characteristics most commonly used for... | |
| ISO 14688-2:2004, together with ISO 14688-1, establishes the basic principles for the identification and classification of soils on the basis of those material and mass characteristics most commonly used for... | |
| ISO 14689-1:2003 relates to the identification and description of rock material and mass on the basis of mineralogical composition, genetic aspects, structure, grain size, discontinuities and other parameters. It also... | |
| ISO 14691:2008 specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines for general-purpose applications in the petroleum, petrochemical and natural gas industries. | |
| ISO 14692-1:2002 gives terms and definitions, describes the philosophy and provides guidance on the range of suitable applications, and defines limitations to the materials of construction for the specification, manufacture,... | |
| ISO 14692-2:2002 gives requirements for the qualification and manufacture of GRP piping and fittings in order to enable the purchase of GRP components with known and consistent properties from any... | |
| ISO 14692-3:2002 gives guidelines for the system design of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The requirements and recommendations apply... | |
| ISO 14692-4:2002 gives requirements and recommendations for the fabrication, installation and operation of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The... | |
| ISO 14693:2003 provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication... | |
| ISO 14694:2003 gives specifications for vibration and balance limits of fans for all applications except those designed solely for air circulation, for example, ceiling fans and table fans. However, it... | |
| ISO 14695:2003 describes a method of measuring the vibrational characteristics of fans of all types, except those designed solely for air circulation, for example, ceiling fans and table fans. However,... | |
| ISO 14696:2009 provides a method for measuring the response of materials, products and assemblies exposed in vertical orientation to controlled levels of radiant heating with a piloted ignition source. The... | |
| ISO 14697:2007 gives guidance on the choice of substrates for building and transport products, when required, for use in reaction to fire tests. ISO 14697:2007 is applicable to those building... | |
| ISO 14698-2:2003 gives guidance on methods for the evaluation of microbiological data and the estimation of results obtained from sampling for viable particles in risk zones for biocontamination control. It... | |
| ISO 14698:2003 establishes the principles and basic methodology of a formal system of biocontamination control (Formal System) for assessing and controlling biocontamination when cleanroom technology is applied for that purpose. | |
| ISO 14701:2011 specifies several methods for measuring the oxide thickness at the surfaces of (100) and (111) silicon wafers as an equivalent thickness of silicon dioxide when measured using X-ray... | |
| ISO 14703:2008 specifies a general wet-sample preparation technique common to the size analysis of powdered fine ceramic materials. The analyzed size distribution of fine particles is strongly dependent on the... | |
| ISO 14704:2008 specifies a test method for determining the flexural strength of monolithic fine ceramics, and whisker- or particulate-reinforc ed ceramic composites, at room temperature. Flexural strength is one measure... | |
| ISO 14705:2008 specifies a test method for determining the Vickers and Knoop hardness of monolithic fine ceramics at room temperature. | |
| ISO 14708-2:2012 specifies requirements that are applicable to those active implantable medical devices intended to treat bradyarrhythmias. The tests that are specified in ISO 14708-2:2012 are type tests, and are... | |
| ISO 14708-3:2008 is applicable to active implantable medical devices intended for electrical stimulation of the central or peripheral nervous system. ISO 14708-3:2008 is also applicable to all non-implantable parts and... | |
| ISO 14708-4:2008 is applicable to active implantable medical devices intended to deliver medicinal substances to site-specific locations within the human body. ISO 14708-4:2008 is also applicable to some non-implantable parts... | |
| ISO 14708-5:2010 specifies requirements for safety and performance of active implantable circulatory support devices. It is not applicable to extracorporeal perfusion devices, cardiomyoplasty, heart restraint devices and counter-pulsation devices, such... | |
| ISO 14708-6:2010 specifies requirements that are applicable to implantable cardioverter defibrillators and the functions of active implantable medical devices intended to treat tachyarrhythmia. ISO 14708-6:2010 is also applicable to some... | |
| ISO 14708-7:2013 specifies requirements that are applicable to those active implantable medical devices that are intended to treat hearing impairment via electrical stimulation of the auditory pathways. The tests that... | |
| ISO 14711:2003 gives guidelines for areas to be addressed and defines the products that are to be generated to develop a space systems mission operations concept. ISO 14711:2003 enables the... | |
| ISO 14713-1:2009 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be zinc coated for corrosion protection and the level of corrosion resistance... | |
| ISO 14713-2:2009 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be hot dip galvanized for corrosion protection. The protection afforded by the... | |
| ISO/TC 193 Natural gas | |
| ISO/TC 194 Biological evaluation of medical devices | |
| ISO/TC 197 Hydrogen technologies | |
| ISO/TC 209 Cleanrooms and associated controlled environments | |
| Machine tools -- Test conditions for wire electrical-discharge machines (wire EDM) -- Terminology and testing of the accuracy | |
| Manipulating industrial robots -- Object handling with grasp-type grippers -- Vocabulary and presentation of characteristics | |
| Measurement of fluid flow in closed conduits -- Thermal mass flowmeters | |
| Metallic coatings -- Determination of porosity in gold coatings on metal substrates -- Nitric acid vapour test | |
| Micrographics -- Quality control of COM recorders that generate images using a single internal display system -- Part 1: Characteristics of the software test target | |
| Micrographics -- Quality control of COM recorders that generate images using a single internal display system -- Part 2: Method of use | |
| Mineral and sapphire watch-glasses -- Part 1: Dimensions and tolerances | |
| Modified flexion test | |
| Natural gas -- Vocabulary | |
| Network services billing -- Requirements | |
| Neutron radiation protection shielding -- Design principles and considerations for the choice of appropriate materials | |
| Optics and optical instruments -- Vocabulary for telescopic systems -- Part 1: General terms and alphabetical indexes of terms in ISO 14132 | |
| Optics and optical instruments -- Vocabulary for telescopic systems -- Part 2: Terms for binoculars, monoculars and spotting scopes | |
| Optics and optical instruments -- Vocabulary for telescopic systems -- Part 3: Terms for telescopic sights | |
| Optics and optical instruments -- Vocabulary for telescopic systems -- Part 4: Terms for astronomical telescopes | |
| Paints and varnishes -- Determination of pigment content -- Part 1: Centrifuge method | |
| Paints and varnishes -- Determination of pigment content -- Part 2: Ashing method | |
| Paints and varnishes -- Determination of pigment content -- Part 3: Filtration method | |
| Passenger cars -- Straight-ahead braking on surfaces with split coefficient of friction -- Open-loop test procedure | |
| Personal protective equipment for protection against falls from a height -- Single-point anchor devices | |
| Petroleum products -- Determination of vanadium and nickel content -- Wavelength-dispersiv e X-ray fluorescence spectrometry | |
| Photography -- Aerial films and spools -- Dimensions | |
| Photography -- Dimensions of glass plates | |
| Photography -- Room-light loading packages for electronic scanners and image-setting film and paper rolls -- Dimensions and related requirements | |
| Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry | |
| Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications | |
| Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | |
| Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress | |
| Plastics -- Melamine-formaldehyd e powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications | |
| Plastics -- Melamine-formaldehyd e powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties | |
| Plastics -- Melamine-formaldehyd e powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds | |
| Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 1: Designation system and basis for specifications | |
| Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 2: Preparation of test specimens and determination of properties | |
| Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 3: Requirements for selected moulding compounds | |
| Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 1: Designation system and basis for specifications | |
| Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 2: Preparation of test specimens and determination of properties | |
| Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 3: Requirements for selected moulding compounds | |
| Plastics -- Unsaturated-polyeste r powder moulding compounds (UP-PMCs) -- Part 1: Designation system and basis for specifications | |
| Plastics -- Unsaturated-polyeste r powder moulding compounds (UP-PMCs) -- Part 2: Preparation of test specimens and determination of properties | |
| Plastics -- Unsaturated-polyeste r powder moulding compounds (UP-PMCs) -- Part 3: Requirements for selected moulding compounds | |
| Plastics -- Urea-formaldehyde and urea/melamine-formal dehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications | |
| Plastics -- Urea-formaldehyde and urea/melamine-formal dehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties | |
| Plastics -- Urea-formaldehyde and urea/melamine-formal dehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds | |
| Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems | |
| Protective clothing for automobile racing drivers -- Protection against heat and flame -- Performance requirements and test methods | |
| Pulps -- Determination of acetone-soluble matter | |
| Pulps -- Standard water for physical testing | |
| Quality requirements for welding -- Resistance welding of metallic materials -- Part 1: Comprehensive quality requirements | |
| Quality requirements for welding -- Resistance welding of metallic materials -- Part 2: Elementary quality requirements | |
| Radiation protection -- Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation | |
| Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 3: Application layer | |
| Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 4: Requirements for emission-related systems | |
| Roller ball pens and refills -- Part 1: General use | |
| Roller ball pens and refills -- Part 2: Documentary use (DOC) | |
| Rubber -- Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy | |
| Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers | |
| Rubber- or plastics-coated fabrics -- Determination of resistance to penetration by water | |
| Rubber- or plastics-coated fabrics -- Determination of tensile strength and elongation at break | |
| Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways | |
| Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails | |
| Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers | |
| Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures | |
| Small craft -- Magnetic compasses | |
| Soil quality -- Biological methods -- Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes | |
| Soil quality -- Determination of exchangeable acidity in barium chloride extracts | |
| Soil quality -- Determination of nitrate nitrogen, ammonium nitrogen and total soluble nitrogen in air-dry soils using calcium chloride solution as extractant | |
| Soil quality -- Determination of organic carbon by sulfochromic oxidation | |
| Soil quality -- Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions | |
| Solid mineral fuels -- Guidance on the sampling of coal seams | |
| Space environment (natural and artificial) -- Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO + 2 000 km) | |
| Space systems -- Structural design -- Loads and induced environment | |
| Specifies a method for the determination of the free fat content of meat and meat products by means of extraction. | |
| Specifies left and right sides of weaving preparation machines. To determine the sides of the machine, the observer looks against the direction of thread feeding. In figures are shown beam... | |
| Specifies the mating and clearance dimensions. The mating dimensions and characteristics of the ground half shall conform to those in figure 1 and table 1. The aircraft half shall mate... | |
| Specifies the minimum clear space to be provided beneath the aircraft main jacking points. Is not intended to define fully all jack clearance deminsions. In situations where clearances are critical,... | |
| Specifies the minimum requirements and describes the corresponding method of test. It is intended to allow homologation tests rather than the individual control of all watches of a production of... | |
| Specifies the outer dimensions of the swivel nuts of nozzles for air-assisted sprayers. The purpose is to simplify the fitting of measurement devices to the swivel nuts. | |
| Specifies the requirements for circuit breakers having an inverse time/current characteristic, of normal ratings up to and including 35 A, for use in nominal 28 V d. c. and/or 115... | |
| Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds | |
| Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds | |
| Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds | |
| Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method | |
| Steel -- Charpy V-notch pendulum impact test -- Instrumented test method | |
| Steel -- Metallographic characterization of duplex grain size and distributions | |
| Surface chemical analysis -- Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy | |
| Surface chemical analysis -- Glow discharge optical emission spectrometry (GD-OES) -- Introduction to use | |
| Surface chemical analysis -- Sputter depth profiling -- Optimization using layered systems as reference materials | |
| TC 113 Hydrometry // SC 2 | |
| TC 114 Horology // SC 13 | |
| TC 150 Implants for surgery // SC 4 | |
| TC 159 Ergonomics // SC 5 | |
| TC 171 Document management applications // SC 1 | |
| TC 172 Optics and photonics // SC 4 | |
| TC 202 Microbeam analysis // SC 2 | |
| TC 21 Equipment for fire protection and fire fighting // SC 8 | |
| TC 22 Road vehicles // SC 10 | |
| TC 34 Food products // SC 15 | |
| TC 45 Rubber and rubber products // SC 1 | |
| The method consists in boiling of a test portion with hydrochloric acid to free the occluded and bound lipid fractions, filtrating of the resulting mass, drying, and extracting with n-hexane... | |
| The method is based on dissolving the coating on a surface of known area in inhibited acid and determination of the resultant loss in mass by weighing the sample before... | |
| Thermal spraying -- Acceptance inspection of thermal spraying equipment | |
| Thermal spraying -- Powders -- Composition and technical supply conditions | |
| Thermal turbines for industrial applications (steam turbines, gas expansion turbines) -- General requirements | |
| This International Standard specifies hygiene requirements of machines and provides information for the intended use to be provided by the manufacturer. It applies to all types of machines and associated... | |
| This international Standard specifies the basic reference method for the determination of the water content of green coffee. This method is designed to serve as a standard for the checking... | |
| This part of ISO 14617 specifies graphical symbols for basic elements in actuators, complete actuators and actuating devices in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for components and devices used in measurement and control systems, represented in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for fluid power conversion units (such as pumps and motors) in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for functional connections, mechanical links, pipelines and related devices such as connection joints, ports, terminals, quick-release couplings and connectors, in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for heat transfer and heat engines in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for measurement and control functions in diagrams, the same symbols in simple applications possibly representing instead components or devices implementing such functions. | |
| This part of ISO 14617 specifies graphical symbols for pumps, compressors and fans, used mainly for transportation, in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for the representation of devices for separating, purification and mixing in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for valves and dampers in diagrams, including symbols for general-purpose valves, those used in fluid power systems and hygienic valves used in... | |
| This part of ISO 14617 specifies graphical symbols in diagrams for mechanical elements such as weights, springs, clutches and brakes, pipe and duct elements such as restrictors, nozzles and air... | |
| This part of ISO 14617 specifies graphical symbols of a general character, mainly for use in building-up complete symbols representing specific products and functions in diagrams. | |
| Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 1: Vocabulary | |
| Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 2: Heating, ventilation and air-conditioning test method and performance | |
| Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 3: Determination of effect of solar heating | |
| Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 4: Air filter element test method | |
| Tractors and self-propelled machines for agriculture and forestry -- Operator enclosure environment -- Part 5: Pressurization system test method | |
| Transportable gas cylinders -- Gas cylinder valves -- Manufacturing tests and inspections | |
| Water quality -- Determination of acute lethal toxicity to marine copepods (Copepoda, Crustacea) | |
| Water quality -- Determination of fresh water sediment toxicity to Heterocypris incongruens (Crustacea, Ostracoda) | |
| Water quality -- Determination of phenol index by flow analysis (FIA and CFA) | |
| Water quality -- Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium -- Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test) | |
| Winter-sports equipment -- Marking of parts made of polymer materials | |
| Workplace atmospheres -- Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperaz ine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors |
| << Prev | Next >> |