IEC - International Electrotechnical Commission Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| IEC 62061:2011(E) specifies the system architecture and the communication protocol of Wireless networks for Industrial Automation - Process Automation (WIA-PA) built on IEEE STD 802.15.4-2006. It cancels and replaces IEC/PAS... | |
| IEC 62061:2015 specifies the system architecture and the communication protocol of Wireless networks for Industrial Automation - Process Automation (WIA-PA) that is built on IEEE STD 802.15.4-2011. This second edition... | |
| IEC 62563-1:2009+A1:2016 describes the evaluation methods for testing medical image display systems. It is directed to practical tests that can be visually evaluated or measured using basic test equipment. More... | |
| IEC 62563-1:2009+A1:2016 +A2:2021 describes the evaluation methods for testing medical image display systems. It is directed to practical tests that can be visually evaluated or measured using basic test equipment. | |
| IEC 62563-2:2021 establishes the performance CRITERIA and test frequencies for the ACCEPTANCE TESTS and CONSTANCY TESTS. The evaluation methods are defined in IEC 62563-1. The scope of this document is... | |
| IEC 62566-2:2020 provides requirements for achieving highly reliable HDL-Programmed Devices (HPDs), for use in I&C systems of nuclear power plants performing functions of safety category B or C as defined... | |
| IEC 62566:2012 provides requirements for achieving highly reliable "HDL-Programmed Devices" (HPD), for use in I&C systems of nuclear power plants performing functions of safety category A as defined by IEC... | |
| IEC 62567:2013 provides test procedures based on the documents mentioned in the introduction and devoted to minimize the causes of discrepancy between test results, taking into consideration the large experience... | |
| IEC 62568:2015 provides test procedures to measure the fatigue characteristics of conductor/clamp systems. For the purposes of this standard, clamps shall be of the metallic type only. Key words: Conductors,... | |
| IEC 62569-1:2017 specifies several qualifiers to be used with object or (dictionary) properties and their values indicating life cycle and other aspects of the property. It is a prerequisite for... | |
| IEC 62570:2014 applies to the practice of marking of items that might be used in the magnetic resonance (MR) environment. The purpose of this practice is to mark items that... | |
| IEC 62571:2011 defines requirements and provides recommendations to publishers, software developers, content providers, and hardware manufacturers for the data structure, usability requirements, playback systems and delivery systems for audiobooks in... | |
| IEC 62572-3:2011 deals with reliability assessment of laser modules used for telecommunication. The aim of this standard is: - to establish a standard method of assessing the reliability of laser... | |
| IEC 62572-3:2014 deals with reliability assessment of laser modules used for telecommunication.Th e aim of this standard is to establish a standard method of assessing the reliability of laser modules... | |
| IEC 62572-3:2016(E) deals with reliability assessment of laser modules used for telecommunication. The aim of this standard is to establish a standard method of assessing the reliability of laser modules... | |
| IEC 62574:2011 specifies the general channel assignment for multichannel audio formats. The general channel assignment as a channel mapping and labeling provides the unified usage of channel assignments for source... | |
| IEC 62574:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62574:2020 specifies the general channel assignment and the metadata for multichannel audio format. This document, with its channel mapping and labelling content, provides the unified usage of channel assignments... | |
| IEC 62575-1:2015 specifies the methods of test and general requirements for RF BAW filters of assessed quality using either capability approval or qualification approval procedures. Conventional crystal filters standardized in... | |
| IEC 62575-2:2012 gives practical guidance on the use of RF BAW filters which are used in telecommunications, measuring equipment, radar systems and consumer products. General information, standard values and test... | |
| IEC 62576:2009 describes the methods for testing electrical characteristics of electric double-layer capacitor cells (hereinafter referred to as capacitor) to be used for peak power assistance in hybrid electric vehicles. | |
| IEC 62576:2018 describes the methods for testing electrical characteristics of electric double-layer capacitor cells (hereinafter referred to as capacitor) to be used for peak power assistance in hybrid electric vehicles. | |
| IEC 62576:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62577:2009 applies to a single stand-alone broadcast transmitter operating in the frequency range 30 MHz to 40 GHz when put on the market. The objective of the standard is... | |
| IEC 62580-1:2015 specifies the general architecture of the On-board Multimedia and Telematic Subsystem (OMTS), which includes four categories of multimedia and telematic subsystems identified as: - Video surveillance;CCTV, - driver... | |
| IEC 62585:2012 provides information on the corrections required over a range of frequencies in order for a periodic test of a sound level meter to be performed according to IEC... | |
| IEC 62586-1:2013 specifies product and performance requirements for instruments whose functions include measuring, recording and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class A... | |
| IEC 62586-1:2017 specifies product and performance requirements for instruments whose functions include measuring, recording and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class A... | |
| IEC 62586-2:2013 specifies functional tests and uncertainty requirements for instruments whose functions include measuring, recording, and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class... | |
| IEC 62586-2:2017 specifies functional tests and uncertainty requirements for instruments whose functions include measuring, recording, and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class... | |
| IEC 62586-2:2017+A1:2021 specifies functional tests and uncertainty requirements for instruments whose functions include measuring, recording, and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class... | |
| IEC 62589:2010 provides requirements for some type tests which are significant only when made on the entire converter group. Provides also a basic relationship between compatible ratings of traction transformer... | |
| IEC 62590-3-1:2022 specifies the requirements and test methods for electronic power compensators for 1AC traction systems. This equipment is used to improve electric power quality inside the electric traction system... | |
| IEC 62590:2010 specifies the requirements for the performance of all fixed installations electronic power converters, using controllable and/or non-controllable electronic valves, intended for traction power supply. The devices can be... | |
| IEC 62590:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62590:2019 specifies the requirements for the performance of all fixed installations electronic power converters, using controllable and/or non-controllable electronic valves, intended for traction power supply. The devices can be... | |
| IEC 62591:2010 specifies an additional Type 20 communication network to IEC 61158-5-20, IEC 61158-6-20 and a Communication Profile CP 9/2 in addition to IEC 61784-1 CPF 9. This standard specifies... | |
| IEC 62591:2016 specifies a wireless communication network in addition to the Type 20 in IEC 61158-3-20, IEC 61158-4-20, IEC 61158-5-20, IEC 61158-6-20 and a Communication Profile CP 9/2 in addition... | |
| IEC 62595-1-1:2013 is a generic specification for backlight unit (BLU) for liquid crystal displays. It defines general procedures for quality assessment and gives general rules for the measuring methods of... | |
| IEC 62595-1-2:2011 gives preferred terms, their definitions and symbols for backlight unit (BLU) and related display panel lighting systems including frontlight; with the object of using the same terminology when... | |
| IEC 62595-1-2:2016(E) gives the preferred terms, their definitions and symbols for display lighting units (DLUs) such as backlight units (BLUs) of transmissive and transflective LCDs, and frontlight units (FLUs) of... | |
| IEC 62595-1-2:2024 gives the preferred terms, their definitions and symbols, for display lighting units such as backlight units of transmissive and transflective displays, and frontlight units of reflective displays, with... | |
| IEC 62595-2-1:2016(E) specifies the standard measurement conditions and measuring methods for determining the electrical and optical parameters of LED backlight units for liquid crystal displays. This first edition cancels and... | |
| IEC 62595-2-2:2018(E) specifies the standard measurement conditions and measuring methods for determining electrical and optical performances of LED light bars with white LEDs used in LCD backlight units. | |
| IEC 62595-2-3:2018(E) specifies the standard measurement conditions and measuring methods for determining electrical, optical, and electro-optical properties of LED frontlight units (FLUs) for reflective displays. | |
| IEC 62595-2-4:2020(E) specifies the electro-optical measuring methods of laser modules with multiple laser devices and an optical output for various displays and display lighting applications which require photometric and colorimetric... | |
| IEC 62595-2-5:2021 specifies the measurement methods for measuring the optical characteristics of convex and concave cylindrical light sources. These non-planar light sources (NPLSs) can have either a continuous, distinct, segmented... | |
| IEC 62595-2:2012 specifies the standard measurement conditions and measuring methods for determining electrical, optical, and electro-optical parameters of LED backlight units for liquid crystal displays. NOTE: Other backlights (Cold Cathode... | |
| IEC 62597:2019 is limited to apparatus, systems and fixed installations which are intended for use in the railway environment. The frequency range covered is 0 Hz to 300 GHz. Technical... | |
| IEC 62598:2011 applies to the manufacture and installation of electrical measuring systems and instruments utilizing radioactive sources (radiometric gauges, hereinafter called gauges). It also applies to source housings intended for... | |
| IEC 62599-1:2010 specifies environmental test methods to be used for testing the system components of the following alarm systems, intended for use in and around buildings: - access control systems,... | |
| IEC 62599-2:2010 for immunity requirements applies to the components of the following alarm systems, intended for use in and around buildings in residential, commercial, light industrial and industrial environments: -... | |
| IEC 62604-1:2015 specifies the methods of test and general requirements for SAW and BAW duplexers of assessed quality using either capability approval or qualification approval procedures. | |
| IEC 62604-1:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62604-1:2022 specifies the methods of test and general requirements for SAW and BAW duplexers of assessed quality using either capability approval or qualification approval procedures. This edition includes the... | |
| IEC 62604-2:2011 concerns the duplexers, which can separate receiving signal from transmitting signal and are key components for two-way radio communications. They are generally used in mobile phones using CDMA... | |
| IEC 62604-2:2017 concerns duplexers which can separate receiving signals from transmitting signals and are key components for two-way radio communications, and which are generally used in mobile phone systems compliant... | |
| IEC 62604-2:2022 applies to duplexers which can separate receiving signals from transmitting signals and are key components for two-way radio communications, and which are generally used in mobile phone systems... | |
| IEC 62604-2:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62605:2011 specifies the interchange format for e-dictionaries among publishers, content creators and manufacturers. It does not address the following aspects: - data formats for reading devices; - elements necessary... | |
| IEC 62605:2016 specifies the interchange format for e-dictionaries among publishers, content creators and manufacturers. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a... | |
| IEC 62605:2021 specifies the interchange format for e-dictionaries among publishers, content creators and manufacturers. This document does not address the following aspects: • data formats for reading devices; • elements... | |
| IEC 62606:2013 applies to arc fault detection devices (AFDD) for household and similar uses in a.c. circuits. An AFDD is designed by the manufacturer: - either as a single device... | |
| IEC 62606:2013+A1:2017 applies to arc fault detection devices (AFDD) for household and similar uses in a.c. circuits. An AFDD is designed by the manufacturer: - either as a single device... | |
| IEC 62606:2013+AMD1:2017 +AMD2:2022 applies to arc fault detection devices (AFDD) for household and similar uses in a.c. circuits. An AFDD is designed by the manufacturer: - either as a single... | |
| IEC 62607-3-1:2014 describes the procedures to be followed and precautions to be observed when performing reproducible measurements of the quantum efficiency of luminescent nanomaterials. Luminescent nanomaterials covered by this method... | |
| IEC 62608-1:2014 specifies the basic reference model to configure devices connected to a home network with a configuration framework for network applications running on such devices and describes the system... | |
| IEC 62608-2:2017 specifies the operational model for home network configuration. In the home network, various CE devices that have distinctive functions are connected on a shared network. However, there is... | |
| IEC 62610-2:2018 provides for compatible methods of configuring forced air cooled cabinets assembled with associated subracks and/or chassis in accordance with the IEC 60297 and IEC 60917 series. This document... | |
| IEC 62610-4:2013 specifies the test setup and test parameters for water supplied heat exchangers within single electronic cabinet configurations. The tests are focused on cabinets for the installation of high... | |
| IEC 62610-5:2016 specifies a method for evaluating the cooling capacity mainly for air convection cooling of empty cabinets in accordance with IEC 60297 and IEC 60917 series. The purpose of... | |
| IEC 62610-6:2020 deals with thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series, provides compatible measurement methods of recirculation ratio and bypass ratio which are indicators... | |
| IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and... | |
| IEC 62612:2013+A1:2015 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and... | |
| IEC 62612:2013+A1:2015+A 2:2018 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic... | |
| IEC 62613-1:2011 applies to accessories with: - three phases (3 poles and Earth) with up to three pilot contacts, - one single pole (Neutral). These accessories have rated currents not... | |
| IEC 62613-1:2019 applies to accessories with - three phases and earth with pilot contacts, - one pole for neutral. These accessories have rated currents not exceeding 500 A and rated... | |
| IEC 62613-2:2011 applies to accessories with - three phases (3 poles and Earth) with up to three pilot contacts, - one single pole (Neutral), these accessories have rated currents not... | |
| IEC 62613-2:2016 contains standard sheets for different configurations of (shore) socket-outlets, (shore) plugs, ship connectors and ship inlets, hereinafter referred to as accessories, up to 12 kV, 500 A, 50/60... | |
| IEC 62614-1:2020 describes the launch condition requirements used for measuring multimode attenuation in passive components and in installed cable plants. In this document, the fibre types that are addressed include... | |
| IEC 62614:2010 describes the launch condition requirements used for measuring multimode attenuation in passive components and in installed cable plants. In this standard, the fibre types that are addressed include... | |
| IEC 62615:2010 defines a method for pulse testing to evaluate the voltage current response of the component under test and to consider protection design parameters for electro-static discharge (ESD) human... | |
| IEC 62616:2010 specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for a bridge navigational watch alarm system (BNWAS) as required by Chapter V... | |
| IEC 62618:2013 applies to Spectroscopy-based alarming Personal Radiation Detectors (SPRD) which represent a new instrument category between alarming Personal Radiation Devices (PRD) and Radionuclide Identification Devices (RID). This standard establishes... | |
| IEC 62618:2022 applies to Spectroscopy-based alarming Personal Radiation Detectors (SPRD). SPRDs detect and identify gamma radiation and may detect neutron radiation. SPRDs can be worn on a belt or in... | |
| IEC 62619:2017 specifies requirements and tests for the safe operation of secondary lithium cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying... | |
| IEC 62619:2022 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC... | |
| IEC 62619:2022 specifies requirements and tests for the safe operation of secondary lithium cells and batteries used in industrial applications, including stationary applications. When there exists an IEC International Standard... | |
| IEC 62620:2014 specifies marking, tests and requirements for lithium secondary cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying test conditions and... | |
| IEC 62620:2014+AMD1:2023 specifies marking, tests and requirements for lithium secondary cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying test conditions and... | |
| IEC 62621:2011 specifies characteristics for composite insulators of electric traction overhead contact line systems for railways, as defined in IEC 60913. Insulators specified in this standard are applied for electric... | |
| IEC 62623:2012 covers personal computing products. It applies to desktop and notebook computers as defined in 4.1 that are marketed as final products and that are hereafter referred to as... | |
| IEC 62623:2022 covers personal computing products. It applies to desktop and notebook computers as defined in 4.1 that are marketed as final products and that are hereafter referred to as... | |
| IEC 62623:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62624:2009(E) (IEEE 1650:2005) provides methods for the electrical characterization of carbon nanotubes (CNTs). The methods will be independent of processing routes used to fabricate the CNTs. | |
| IEC 62625-1:2013 covers the specification of an on board driving data recording system for the purpose of recording data about the operation of the train. The data refers both to... | |
| IEC 62625-2:2016 covers the standardized test methods for verifying the compliance of an On board Driving Data Recording System implementation with the requirements specified by IEC 62625-1. It also covers... | |
| IEC 62626-1:2014 applies to enclosed switches-disconnecto rs with rated voltages up to 1 000 V a.c. for repair and maintenance work or cleaning work in load circuits. Devices within the... | |
| IEC 62626-1:2023 applies to enclosed switches-disconnecto rs with rated voltages up to 1 000 V AC for repair and maintenance work or cleaning work in load circuits. Devices within the... | |
| IEC 62626-1:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62628:2012 addresses the issues concerning software aspects of dependability and gives guidance on achievement of dependability in software performance influenced by management disciplines, design processes and application environments. It... | |
| IEC 62629-1-2:2013 provides a list of the terminologies that are frequently used in describing 3D display technologies in the IEC 62629 series. Terms for various 3D display technologies on stereoscopic,... | |
| IEC 62629-1-2:2021 provides a list of the terminologies that are frequently used in describing 3D display technologies in the -IEC 62629 series. Terms for various 3D display technologies on stereoscopic,... | |
| IEC 62629-1-2:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62629-12-1:2014 determines the following measuring methods for characterizing the performance of stereoscopic display devices using either active or passive glasses. This standard focuses on the types of stereoscopic displays... | |
| IEC 62629-12-2:2019 specifies the measuring methods of motion artifacts for stereoscopic displays using glasses. This document is applicable to stereoscopic displays using glasses, which consist of transmissive type active matrix... | |
| IEC 62629-13-1:2017(E) specifies the visual inspection methods of ghost image. This document is applicable to stereoscopic displays using glasses. | |
| IEC 62629-22-1:2013 specifies optical measuring methods for autostereoscopic display devices. It defines general measuring procedures for optical characteristics of two-view and multi-view displays and integral imaging displays. | |
| IEC 62629-22-1:2016(E) specifies optical measuring methods for autostereoscopic display devices. It defines general measuring procedures for optical characteristics of two-view and multi-view displays and integral imaging displays. This edition includes... | |
| IEC 62629-52-1:2024 specifies the standard measurement methods and measurement conditions for determining the optical properties of aerial displays. This document excludes image quality of aerial displays, such as modulation transfer... | |
| IEC 62629-62-11:2022 specifies the standard measuring conditions and measurement methods for determining the optical properties of the image created by 3D display devices and virtual-image optics such as head-up displays. | |
| IEC 62631-1:2011 gives general guidelines for the determination of dielectric and resistive properties of solid electrical insulating materials. | |
| IEC 62631-2-1:2018 describes test methods for the determination of permittivity and dissipation factor properties of solid insulating materials (AC methods from 0,1 Hz up to 10 MHz). This first edition... | |
| IEC 62631-2-2:2022 specifies test methods for the determination of permittivity and dissipation factor properties of solid insulating materials in a high frequency range from 1 MHz to 300 MHz. | |
| IEC 62631-2-3:2024 specifies the measuring technology and the test method for the relative permittivity and dielectric dissipation factor of thin single layer insulating polymer film without any additional metallization on... | |
| IEC 62631-3-11:2018 covers a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying DC voltage. It covers the materials described in... | |
| IEC 62631-3-12:2024 specifies a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying a DC voltage. It covers casting resins described... | |
| IEC 62631-3-1:2016 covers a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying a DC voltage. This edition includes the following... | |
| IEC 62631-3-1:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62631-3-1:2023 specifies a method of test for the determination of volume resistance and volume resistivity of electrical insulating materials by applying a DC voltage. This edition includes the following... | |
| IEC 62631-3-2:2015 covers methods of test for the determination of surface resistance and surface resistivity of electrical insulation materials by applying DC voltage. This first edition cancels and replaces the... | |
| IEC 62631-3-2:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC... | |
| IEC 62631-3-2:2023 describes methods of test for the determination of surface resistance and surface resistivity of electrical insulation materials by applying DC voltage. This edition includes the following significant technical... | |
| IEC 62631-3-3:2015 covers methods of test for the determination of the insulation resistance of electrical insulating materials or insulating systems by applying DC voltage. This first edition cancels and replaces... | |
| IEC 62631-3-4:2019 covers procedures for the determination of insulation resistance and volume resistivity of insulating materials by applying DC-voltage and temperatures up to 800 °C. The typical application materials include... | |
| IEC 62634:2011 describes how to measure minimum RDS receiver performance requirements which concern three RDS receiver product categories. It should be noted that there are also RDS receiver products on... | |
| IEC 62634:2015 describes how to measure minimum RDS receiver performance requirements which concern three RDS receiver product categories. However, it should be noted that there are also RDS receiver products... | |
| IEC 62637-1:2011 defines a charging interface between small handheld multimedia devices and power-supply accessories, specifically chargers. Devices, which could be based on this standard may vary over time, but have... | |
| IEC 62637-2:2011 provides the conformance testing rules and guidelines for equipment built to meet the 2 mm barrel type charging interface specified in the 62637-1. This bilingual version (2011-07) replaces... | |
| IEC 62639:2012 specifies the performance requirements for fluorescent induction lamps for general lighting purposes. In this standard, the term "lamp" stands for "induction lamp". It may be expected that lamps... | |
| IEC 62640:2011 applies to residual current-operated devices (RCD) incorporated in, or specifically intended for use with two pole socket-outlets, with or without earthing contact for household and similar uses (SRCD:... | |
| IEC 62640:2011+A1:2015 applies to residual current-operated devices (RCD) incorporated in, or specifically intended for use with two pole socket-outlets, with or without earthing contact for household and similar uses (SRCD:... | |
| IEC 62641:2022 specifies the mechanical and electrical properties of round and formed wires for equivalent diameters up to the values according to Table 3 for aluminium and aluminium alloys and... | |
| IEC 62642-1:2010 specifies the requirements for intrusion and hold-up alarm systems (I&HAS) installed in buildings using specific or non-specific wired interconnections or wire-free interconnections. These requirements also apply to the... | |
| IEC 62642-2-2:2010 is for passive infrared detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free detectors, and uses... | |
| IEC 62642-2-3:2010 is for microwave detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free detectors, and uses environmental... | |
| IEC 62642-2-4:2010 is for combined passive infrared and microwave detectors installed in buildings and provides for security Grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free... | |
| IEC 62642-2-5:2010 is for combined passive infrared and ultrasonic detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free... | |
| IEC 62642-2-6:2010 provides for security grades 1 to 4, (see IEC 62642-1) specific or non-specific wired or wirefree opening contacts (magnetic), and includes the requirements for four environmental classes covering... | |
| IEC 62642-2-71:2015 defines passive acoustic glass break detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free detectors, and... | |
| IEC 62642-2-72:2015 defines passive surface mounted glass break detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free detectors,... | |
| IEC 62642-2-73:2015 defines active surface mounted glass break detectors installed in buildings and provides for security grades 1 to 4 (see IEC 62642-1), specific or non-specific wired or wire-free detectors,... | |
| IEC 62642-3:2010 specifies the requirements, performance criteria and testing procedures for control and indicating equipment (CIE) intended for use in intrusion and hold-up alarm systems (I&HAS) installed in buildings. This... | |
| IEC 62642-4:2010 includes requirements for warning devices used for notification in intrusion and hold up alarm systems installed in buildings. Four grades of warning device are described corresponding to each... | |
| IEC 62642-5-3:2010 applies to intrusion alarm equipment using radio frequency links and located on protected premises. This standard defines the terms used in the field of intrusion alarm equipment using... | |
| IEC 62642-6:2011 specifies the requirements, performance criteria and testing procedures for power supplies (PS) to be used as part of Intrusion and Hold up Alarm Systems (I&HAS). The PS shall... | |
| IEC 62642-8:2011 specifies the requirements for security fog systems as a part of an I&HAS. It covers application and performance and also gives the necessary tests and trials to ensure... | |
| IEC 62645:2014 establishes requirements and provides guidance for the development and management of effective security programmes for I&C computer-based systems for NPPs, possibly integrating HPD (HDL (Hardware Description Language) Programmed... | |
| IEC 62645:2019 establishes requirements and provides guidance for the development and management of effective computer security programmes for I&C programmable digital systems. Inherent to these requirements and guidance is the... | |
| IEC 62646:2012 establishes requirements for the whole life cycle of operating procedures that the designer wishes to computerise. It also provides guidance for making decisions about which types of procedures... | |
| IEC 62646:2016 establishes requirements for the whole life cycle of operating procedures that the designer wishes to computerise. It also provides guidance for making decisions about which types of procedures... | |
| IEC 62648:2012 provides guidelines to ensure that graphical symbols for use on equipment in IEC product publications are consistent with the requirements of horizontal standard IEC 60417, and ISO 7000. | |
| IEC 62648:2012+A1:2015 provides guidelines to ensure that graphical symbols for use on equipment in IEC product publications are consistent with the requirements of horizontal standard IEC 60417, and ISO 7000. | |
| IEC 62648:2022 document provides guidelines to help ensure that the requirement in ISO/IEC Directives, Part 2:2021, 28.6.2 is met, such that graphical symbols for use on equipment in IEC product... | |
| IEC 62648:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62651:2013 describes the requirements for thermocouples suitable for nuclear power plant (NPP) applications. Thermocouples are widely used in NPPs with other temperature measurement devices such as resistance temperature detectors. | |
| IEC 62656-1:2014 specifies the logical structure for a set of spreadsheets, used as "data parcels", to define, transfer and register product ontologies. The spreadsheet interface structure defined in this part... | |
| IEC 62656-3:2015 defines a formal mapping between the IEC 62656 and meta-model for CIM in order to import the CIM ontology into the IEC CDD, and to ensure the interoperability... | |
| IEC 62656-5:2017 specifies a method for representing activities and relations among the activities by a tabular ontology representation, called “parcellized activity model” or PAM for short, which is a specialized... | |
| IEC 62656-8:2020 specifies a web service interface to exchange data parcel(s) conformant to IEC 62656-1, between a parcel server and a parcel client or between parcel servers. This interface comprises... | |
| IEC 62657-1:2017 provides the wireless communication requirements dictated by the applications of wireless communication systems in industrial automation, and requirements of related context. The requirements are specified in a way... | |
| IEC 62657-2:2013 specifies the fundamental assumptions, concepts, parameters, and procedure for wireless communication coexistence; provides guidelines, requirements, and best practices for wireless communication's availability and performance in an industrial automation... | |
| IEC 62657-2:2017, - specifies the fundamental assumptions, concepts, parameters, and procedures for wireless communication coexistence; - specifies coexistence parameters and how they are used in an application requiring wireless coexistence; | |
| IEC 62657-2:2017 - specifies the fundamental assumptions, concepts, parameters, and procedures for wireless communication coexistence; - specifies coexistence parameters and how they are used in an application requiring wireless coexistence; | |
| IEC 62657-2:2022 this part: • specifies the fundamental assumptions, concepts, parameters, and procedures for wireless communication coexistence; • specifies coexistence parameters and how they are used in an application requiring... | |
| IEC 62657-3:2022 specifies a general model approach for automated coexistence management and provides application guidance. This document provides the usage of related parameters and interfaces to establish and to maintain... | |
| IEC 62657-4:2022 specifies a concept and methods for central coordination (CC) of automation applications using wireless communications to extend the coexistence management according to IEC 62657-2. It establishes system elements,... | |
| IEC 62660-1:2010 specifies performance and life testing of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). | |
| IEC 62660-1:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62660-1:2018 specifies performance and life testing of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). This document specifies... | |
| IEC 62660-2:2010 specifies test procedures to observe the reliability and abuse behaviour of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric... | |
| IEC 62660-2:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62660-2:2018 specifies test procedures to observe the reliability and abuse behaviour of secondary lithium-ion cells and cell blocks used for propulsion of electric vehicles including battery electric vehicles (BEV)... | |
| IEC 62660-3:2016 specifies test procedures and the acceptance criteria for safety performance of secondary lithium-ion cells and cell blocks used for the propulsion of electric vehicles (EV) including battery electric... | |
| IEC 62660-3:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62660-3:2022 specifies test procedures and acceptance criteria for safety performance of secondary lithium-ion cells and cell blocks used for propulsion of electric vehicles (EV) including battery electric vehicles (BEV)... | |
| IEC 62664-1-1:2013 contains the initial, start-of-life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled multimode resilient alignment sleeve LC-PC duplex connector set (plug/adaptor/plug) should meet in... | |
| IEC 62665:2012 specifies: - a text encoding scheme to generate a texture map; - a physical shape and dimension of the texture map for printing; - additional features for texture... | |
| IEC 62665:2015 this International Standard specifies: - a text encoding scheme to generate a texture map, - a physical shape and dimension of the texture map for printing, - additional... | |
| IEC 62667:2017 applies to light ion beam ME equipment when used, for therapy purposes, in human medical practice. This document applies to light ion beam ME equipment which delivers light... | |
| IEC 62668-1:2019 defines requirements for avoiding the use of counterfeit, recycled and fraudulent components used in the aerospace, defence and high performance (ADHP) industries. It also defines requirements for ADHP... | |
| IEC 62668-1:2019+AMD1:20 24 CSV defines requirements for avoiding the use of counterfeit, recycled and fraudulent components used in the aerospace, defence and high performance (ADHP) industries. It also defines requirements... | |
| IEC 62668-2:2019, defines requirements for avoiding the use of counterfeit, recycled and fraudulent components when these components are not purchased from the original component manufacturer (OCM) or are purchased from... | |
| IEC 62670-1:2013 defines standard conditions for assessing the power produced by CPV systems and their photovoltaic subcomponents. The object is to define a consistent set of conditions so that power... | |
| IEC 62670-2:2015 specifies the minimum requirements for determining the energy output and performance ratio for CPV modules, arrays, assemblies and power plants using an on-sun, measurement based method. This International... | |
| IEC 62670-3:2017 defines measurement procedures and instrumentation for determining concentrator photovoltaic performance at concentrator standard operating conditions (CSOC) and concentrator standard test conditions (CSTC), defined in IEC 62670-1, including power... | |
| IEC 62671:2013 addresses certain devices that contain embedded software or electronically-confi gured digital circuits that have not been produced to other IEC Standards which apply to systems and equipment important... | |
| IEC 62673:2013 describes a generic methodology for dependability assessment and assurance of communication networks from a network life cycle perspective. It presents the network dependability assessment strategies and methodology for... | |
| IEC 62674-1:2012 applies to fixed surface mount inductors and ferrite beads. The object of this standard is to define the terms necessary to describe the inductors covered by this standard,... | |
| IEC 62675:2014 specifies marking, designation, dimensions, tests and requirements for sealed nickel-metal hydride prismatic secondary single cells. | |
| IEC 62676-1-1:2013 specifies the minimum requirements and gives recommendations for Video Surveillance Systems (VSS) (so far called CCTV), installed for security applications. This Standard specifies the minimum performance requirements and... | |
| IEC 62676-1-2:2013 introduces general requirements on video transmission. This standard covers the general requirements for video transmissions on performance, security and conformance to basic IP connectivity, based on available, well-known,... | |
| IEC 62676-2-11:2024 defines minimum requirement profiles for Video Management Systems (VMS) and cloud Video-Surveillance-a s-a-Service (VSaaS) Systems to optimize interfacing with third parties. It defines minimum required VMS interoperability levels... | |
| IEC 62676-2-1:2013 introduces an IP network interface for devices in surveillance applications. This International Standard specifies a network protocol for the full interoperability of video devices. On top of the... | |
| IEC 62676-2-2:2013 specifies a compliant IP video protocol based on HTTP and REST services. Video transmission devices are often equipped with web servers that respond to HTTP requests. The HTTP... | |
| IEC 62676-2-31:2019 defines procedures for communication between network video clients and video transmitter devices. This new set of specifications makes it possible to build network video systems with devices and... | |
| IEC 62676-2-32:2019 specifies the web service interface for the configuration of the recording of video, audio and metadata. Additionally, associated events are defined. Web service usage is outside the scope... | |
| IEC 62676-2-33:2022 specifies management systems interfaces and mechanisms for remote operational access to physical security devices such as video surveillance devices and systems. For video surveillance, the use cases focus... | |
| IEC 62676-2-3:2013 defines procedures for communication between network video clients and video transmitter devices based on Web Services. This new set of specifications makes it possible to build network video... | |
| IEC 62676-3:2013 specifies physical, electrical and software interface (non-IP) specifications of analog and digital video interface in video surveillance systems (so far called CCTV) applications. Video interfaces are used both... | |
| IEC 62676-4:2014 gives recommendations and requirements for the selection, planning, installation, commissioning, maintaining and testing video surveillance systems (VSS) comprising of image capture device(s), interconnection(s) and image handling device(s), for... | |
| IEC 62676-5-1:2024 defines measuring methods for performance values of video surveillance camera equipment and defines image quality tests under the given temperature and humidity environment. This document is mainly targeting... | |
| IEC 62676-5:2018 defines recommendations and requirements for representation and measuring methods of performance values to be described in materials such as instruction manuals, brochures and specifications of video surveillance camera... | |
| IEC 62677-1:2017 is applicable to heat shrinkable low and medium voltage moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection, electrical conductance, anti-tracking... | |
| IEC 62677-2:2017 gives methods of test for heat shrinkable low and medium voltage moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection and... | |
| IEC 62677-3-101:2018 is applicable to heat shrinkable low voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints... | |
| IEC 62677-3-102:2018 is applicable to heat shrinkable medium voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints... | |
| IEC 62677-3-103:2019 is applicable to heat shrinkable low and medium voltage moulded shapes, conductive, in a range of configurations suitable for environmental sealing, mechanical protection, strain relief for power cable... | |
| IEC 62679-1-1:2014 gives the preferred terms, their definitions, as well as the symbols for electronic paper displays (EPDs). | |
| IEC 62679-2:2018(E) is restricted to electronic paper display (EPD) modules that show information by reflection, can hold an image, and can have an integrated lighting unit. This document specifies the... | |
| IEC 62679-3-1:2014 specifies the standard measurement conditions and measurement methods for determining the optical performance of Electronic Paper Display (EPDs). The scope of this document is restricted to EPDs using... | |
| IEC 62679-3-2:2013 is restricted to electronic paper display modules using either segment, passive, or active matrix, and either monochromatic, or colour type displays. In order to achieve a useful and... | |
| IEC 62679-3-3:2016(E) specifies the standard measurement conditions and measurement methods for determining the optical performance of electronic paper display (EPD) devices which have an operating integrated lighting unit (such as... | |
| IEC 62679-4-2:2016(E) specifies the environmental conditions to determine the environmental reliability of electronic paper display (EPD) panels and/or modules for storage under the assumed usage environment. The scope of this... | |
| IEC 62680-1-1-3:2017(E) is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the... | |
| IEC 62680-1-1:2015 contains specifications that define limits as well as detection, control and reporting mechanisms to permit devices to draw current in excess of the USB 2.0 specification for charging... | |
| IEC 62680-1-2:2016(E) defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply... | |
| IEC 62680-1-2:2017(E) defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply... | |
| IEC 62680-1-2:2018 defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply... | |
| IEC 62680-1-2:2019 defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply... | |
| IEC 62680-1-2:2021 defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply... | |
| IEC 62680-1-2:2022 specification defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power... | |
| IEC 62680-1-2:2024 The USB Power Delivery specification defines a power delivery system covering all elements of a USB system including Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes... | |
| IEC 62680-1-3:2016(E) defines the USB Type-C™ receptacles, plug and cables. It defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional... | |
| IEC 62680-1-3:2018 defines the USB Type-C™ receptacles, plug and cables. The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with... | |
| IEC 62680-1-3:2021 defines the USB Type-C™ receptacles, plug and cables. The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with... | |
| IEC 62680-1-3:2022 defines the USB Type-C® receptacles, plug and cables. The USB Type-C Cable and Connector Specification is guided by the following principles: - Enable new and exciting host and... | |
| IEC 62680-1-3:2024 This specification defines the USB Type-C® receptacles, plug and cables. The USB Type-C Cable and Connector Specification is guided by the following principles: - Enable new and exciting... | |
| IEC 62680-1-4:2018 provides a means for authenticating Products with regard to identification and configuration. Authentication is performed via USB Power Delivery message communications and/or via USB data bus control transactions. | |
| IEC 62680-1-5:2019 describes the minimum capabilities and characteristics an audio device shall support to comply with the USB. This document also provides recommendations for optional features. The Audio Device Class... | |
| IEC 62680-1-7:2019 describes in detail all the Audio Data Formats that are supported by the Audio Device Class. This document is considered an integral part of the Audio Device Class... | |
| IEC 62680-1-8:2019 is to describe in detail all the Terminal Types that are supported by the Audio Device Class. This document is considered an integral part of the Audio Device... | |
| IEC 62680-1:2013 defines an industry-standard USB. The specification describes the bus attributes, the protocol definition, types of transactions, bus management, and the programming interface required to design and build systems... | |
| IEC 62680-2-1:2015 defines an industry-standard USB. The specification describes the bus attributes, the protocol definition, types of transactions, bus management, and the programming interface required to design and build systems... | |
| IEC 62680-2-2:2015 defines the requirements and features of a Micro-USB connector that will meet the current and future needs of the Cell Phone and Portable Devices markets, while conforming to... | |
| IEC 62680-2-3:2015 describes the mechanical, electrical, environmental, design and performance criteria and voluntary supplier compliance requirements for USB connectors, cable and fabricated cable assemblies. In addition, this document provides detailed... | |
| IEC 62680-2:2013 defines the requirements and features of a Micro-USB connector that will meet the current and future needs of the Cell Phone and Portable Devices markets, while conforming to... | |
| IEC 62680-3-1:2017 defines the latest generation USB industry standard, USB 3.1. The specification describes the protocol definition, types of transactions, bus management, and the programming interface required to design and... | |
| IEC 62680-3:2013 contains the specifications that define limits as well as detection, control and reporting mechanisms to permit devices to draw current in excess of the USB 2.0 specification for... | |
| IEC 62680-4-1:2022 provides Universal Serial Bus 4™ Specification. USB 3.1 and USB 3.2 were evolutionary steps to increase bandwidth. The goal for USB4 remains the same with the added goal... | |
| IEC 62680-4:2013 describes the mechanical, electrical, environmental, design and performance criteria and voluntary supplier compliance requirements for USB connectors, cable and fabricated cable assemblies. In addition, this document provides detailed... | |
| IEC 62682:2014 specifies general principles and processes for the lifecycle management of alarm systems based on programmable electronic controller and computer-based human-machine interface (HMI) technology for facilities in the process... | |
| IEC 62682:2022 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC... | |
| IEC 62682:2022 specifies general principles and processes for the management of alarm systems based on controls system and human-machine interfaces (HMI) for facilities in the process industries. It covers all... | |
| IEC 62683-1:2017 establishes the reference dictionary of the general description of low-voltage switchgear and controlgear classes based on defined properties. This dictionary is used to facilitate the exchange in electronic... | |
| IEC 62683-2:2024 specifies the functional safety and reliability data model descriptions for low‑voltage switchgear and controlgear to be used by engineering tools for the design of safety related control systems... | |
| IEC 62683:2013 is used to facilitate the exchange in electronic format of data describing low voltage switchgear and controlgear. This standard provides clear and unambiguous definitions of a limited number... | |
| IEC 62683:2015 establishes the reference dictionary of the general description of low-voltage switchgear and controlgear classes based on defined properties. This second edition cancels and replaces the first edition published... | |
| IEC 62684:2011 specifies the interoperability of common external power supplies for use with data enabled mobile telephones. It defines the common charging capability and specifies interface requirements for the the... | |
| IEC 62684:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62684:2018 specifies the interoperability of common external power supplies for use with data-enabled mobile telephones. It defines the common charging capability and specifies interface requirements for the external power... | |
| IEC 62688:2017 describes the fundamental construction and testing requirements for Concentrator Photovoltaic (CPV) modules and assemblies in order to provide safe electrical and mechanical operation during their expected lifetime. Specific... | |
| IEC 62689-1:2016 defines the minimum requirements (therefore performances) and consequent classification and tests (with the exception of functional and communication ones) for fault passage indicators (FPIs) and distribution substation units... | |
| IEC 62689-2:2016 describes electric phenomena and electric system behaviour during faults, according to the most widely diffused distribution system architecture and to fault typologies, to define the functional requirements for... | |
| IEC 62693:2013 specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of industrial infrared electroheating installations are established. A limitation of the... | |
| IEC 62694:2014 applies to backpack-type radiation detectors (BRDs) that are used for the detection of illicit trafficking of radioactive material. This standard establishes performance and testing requirements associated with radiation... | |
| IEC 62694:2022 applies to backpack-type radiation detectors (BRDs) that are primarily used for the detection of illicit trafficking of radioactive material. BRDs are portable instruments designed to be worn during... | |
| IEC 62695:2014 covers specific characteristics of traction transformers used in traction substations or along the track for the supply of power to a.c. and d.c. traction systems or to provide... | |
| IEC 62697-1:2012 specifies a test method for the quantitative determination of corrosive sulfur compounds-dibenzyl disulfide (DBDS) in used and unused insulating liquids over a 5 to 600 mg kg-1 concentration... | |
| IEC 62698:2013 defines the common semantics and core elements on rights information interoperability for IPTV systems/equipment that is subject to multimedia content to be used across different platforms legally. The... | |
| IEC 62701:2014 specifies requirements for recycled mineral insulating oils intended for use in transformers, switchgear, and similar electrical equipment in which oil is required for insulation and heat transfer. These... | |
| IEC 62702-1-1:2016 specifies a method of data-quality assurance for writable DVD disks (hereinafter disks) which are specified for long term data storage, and a data migration method which can sustain... | |
| IEC 62702-1-1:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62702-1-1:2022 specifies a method of data-quality assurance for writable DVD disks (hereafter referred to as "disks") which are specified for long-term data storage, and a data migration method which... | |
| IEC 62702-1-2:2017(E) specifies a method of data-quality assurance for writable disks which are specified for long-term data storage, and a data migration method, which can sustain the recorded data on... | |
| IEC 62702-1-2:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62702-1-2:2022 specifies a method of data-quality assurance for writable BD disks (hereafter referred to as "disks") which are specified for long-term data storage, and a data migration method which... | |
| IEC 62703:2013 specifies the general aspects in the terminology and definitions related to the performance of fluorometric oxygen analyzers used for the continuous determination of dissolved oxygen partial pressure or... | |
| IEC 62705:2014 applies to radiation monitoring system (RMS) installed in the nuclear power plants (NPPs). This standard gives requirements for the lifecycle management of RMSs and gives guidance on the... | |
| IEC 62705:2022 gives requirements for the lifecycle management of radiation monitoring systems (RMS) and gives guidance on the application of existing IEC standards covering the design and qualification of systems... | |
| IEC 62705:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62706:2012 establishes the environmental, mechanical and electromagnetic performance requirements and methods of test for radiation protection instrumentation. The object of this standard is to define, for design and test... | |
| IEC 62706:2019 recommends the climatic, mechanical and electromagnetic performance requirements and methods of test for radiation protection instrumentation. This document also provides guidance regarding the setup of test equipment and... | |
| IEC 62707-1:2013 specifies general requirements, a grid and a corresponding code for the colour binning of white LED packages emitting incoherent, visible radiation. It applies for LED packages. Other parts... | |
| IEC 62707-1:2013+A1:2018 specifies general requirements, a grid and a corresponding code for the colour binning of white LED packages emitting incoherent, visible radiation. It applies for LED packages. Other parts... | |
| IEC 62708:2015 defines specific documents and their basic content required for electrical and instrumentation projects in the process industry. It specifies the document kind name and the mandatory content of... | |
| IEC 62709:2014 provides standard methods of measuring and reporting imaging quality characteristics that enable system manufacturers, potential system users and other interested parties to: - establish a consistent indicator of... | |
| IEC 62709:2024 applies to security screening systems that utilize X-ray radiation and are used to inspect people who are not inside vehicles, containers, or enclosures. Specifically, this document applies to... | |
| IEC 62709:2024 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62714-1:2014 is a solution for data exchange focusing on the domain of automation engineering. The data exchange format defined in the IEC 62714 series (Automation Markup Language, AML) is... | |
| IEC 62714-1:2018 is a solution for data exchange focusing on the domain of automation engineering. The data exchange format defined in the IEC 62714 series (Automation Markup Language, AML) is... | |
| IEC 62714-1:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62714-2:2015 specifies normative as well as informative AML role class libraries for the modelling of engineering information for the exchange between engineering tools in the plant automation area by... | |
| IEC 62714-2:2022 specifies normative as well as informative AML libraries for the modelling of engineering information for the exchange between engineering tools in the plant automation area by means of... | |
| IEC 62714-3:2017 specifies the integration of geometry and kinematics information for the exchange between engineering tools in the plant automation area by means of AML. | |
| IEC 62714-4:2020 specifies the integration of logic information as part of an AML model for the data exchange in a heterogenous engineering tool landscape of production systems. This document specifies... | |
| IEC 62714-5:2022 Engineering processes of technical systems and their embedded automation systems are executed with increasing efficiency and quality. Especially since the project duration tends to increase as the complexity... | |
| IEC 62715-1-1:2013 gives the preferred terms, their definitions and symbols for flexible display devices, with the object of using the same terminology when standards are prepared in different countries. | |
| IEC 62715-2:2022(E) specifies the essential ratings and characteristics of flexible display modules. | |
| IEC 62715-5-1:2017(E) specifies the standard measuring conditions and measuring methods for determining the optical performance of flexible displays in the dark or under ambient illumination. This document mainly applies to... | |
| IEC 62715-5-3:2017(E) provides the framework and procedures for performing the visual assessment of flexible display devices. Visual assessment stipulated in this document is applicable to flexible display modules in the... | |
| IEC 62715-6-1:2014 is to define the standard test methods to evaluate the mechanical stability of flexible display modules which include displays such as LCD, e-paper, and OLED. It takes into... | |
| IEC 62715-6-1:2018 defines the standard test methods to evaluate the mechanical stability of flexible display modules, specifically mechanical stability against deformation, such as bending, rolling, twisting, and stretching. Display modules... | |
| IEC 62715-6-1:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62715-6-22:2023 specifies the standard measurement conditions and methods for determining the surface crease and waviness for the evaluation of foldable displays. The measurement methods are used to specify the... | |
| IEC 62715-6-23:2024 specifies the standard measuring methods to evaluate the mechanical durability of foldable display modules, especially mechanical durability under the condition reflecting the actual usage environment. | |
| IEC 62715-6-2:2017(E) specifies testing methods for evaluating the environmental endurance of flexible display panels and modules for use, storage and transport under assumed usage environment. This part of IEC 62715... | |
| IEC 62715-6-3:2020 (E) is to define the standard test methods to evaluate the mechanical robustness of flexible display modules, especially mechanical robustness regarding impact and hardness, which include displays such... | |
| IEC 62716:2013 describes test sequences useful to determine the resistance of PV modules to ammonia (NH3). All tests included in the sequences, except the bypass diode functionality test, are fully... | |
| IEC 62717:2014 specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. This first edition cancels and replaces IEC... | |
| IEC 62717:2014+A1:2015 specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. This first edition cancels and replaces IEC... | |
| IEC 62717:2014+A1:2015+A 2:2019 specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. This first edition cancels and replaces... | |
| IEC 62718:2013 specifies the performance and constructional requirements, and associated tests, for d.c. supplied electronic ballasts used to supply fluorescent lamps for lighting on railway rolling stock. Its requirements replace... | |
| IEC 62722-1:2014 covers specific performance and environmental requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. Unless otherwise detailed, performance data covered... | |
| IEC 62722-1:2022 covers specific performance and environmental requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. Unless otherwise detailed, performance data covered... | |
| IEC 62722-1:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62722-2-1:2014 specifies the performance requirements for LED luminaires, together with the test methods and conditions, required to show compliance with this standard. It applies to LED luminaires for general... | |
| IEC 62722-2-1:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC... | |
| IEC 62722-2-1:2023 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general lighting purposes. Semi-luminaires are not covered under... | |
| IEC 62724:2013 specifies the requirements of insulating synthetic rope assemblies and is applicable to electric traction overhead contact lines for railways, light railways, tramways, trolleybuses and other systems. This standard... | |
| IEC 62729:2012 specifies the performance requirements and methods of testing for shipborne equipment for use for long-range identification and tracking (LRIT). LRIT of ships is a requirement of regulation V/19-1... | |
| IEC 62731:2013 specifies the text-to-speech functionality for a (broadcast) receiver with a text-to-speech system. Such a system may be one device, i.e. a receiver with an integrated text-to-speech generator, or... | |
| IEC 62731:2018 specifies the text-to-speech functionality for a (broadcast) receiver with a text-to-speech system. Such a system may be one device, i.e. a receiver with an integrated text-to-speech generator, or... | |
| IEC 62733:2015 provides general and safety requirements for programmable components used in products covered by IEC 61347. The requirements of this standard are only applicable to the programmable components (including... | |
| IEC 62734:2014 provides specifications in accordance with the OSI Basic Reference Model, ISO/IEC 7498-1, (e.g., PhL, DL, etc.). It is intended to provide reliable and secure wireless operation for non-critical... | |
| IEC 62734:2014+A1:2019 provides specifications in accordance with the OSI Basic Reference Model, ISO/IEC 7498-1, (e.g., PhL, DL, etc.). It is intended to provide reliable and secure wireless operation for non-critical... | |
| IEC 62739-1:2013 provides an evaluating test method for the erosion of the metallic materials without surface processing intended to be used for lead-free wave soldering equipment as a solder bath... | |
| IEC 62739-2:2016 provides an evaluating test method for the erosion of the metallic materials with surface processing intended to be used for lead-free wave soldering equipment as a solder bath... | |
| IEC 62739-3:2017 describes the selection methodology of an appropriate evaluating test method for the erosion of the metal materials without or with surface processing intended to be used for lead-free... | |
| IEC 62740:2015 describes the basic principles of root cause analysis (RCA) and specifies the steps that a process for RCA should include. This standard identifies a number of attributes for... | |
| IEC 62741:2015 gives guidance on the content and application of a dependability case and establishes general principles for the preparation of a dependability case. This standard is written in a... | |
| IEC 62742:2021 specifies minimum requirements for emission, immunity and performance criteria regarding electromagnetic compatibility (EMC) of electrical and electronic equipment for ships with non-metallic hull. NOTE Requirements for metallic hull... | |
| IEC 62744:2014 provides generic rules for the representation of states of objects by graphical symbols standardized in IEC 60617, ISO 14617, IEC 60417, for example, and for future graphical symbols... | |
| IEC 62745:2017 specifies requirements for the functionality and interfacing of cableless (for example, radio, infra-red) control systems that provide communication between operator control station(s) and the control system of a... | |
| IEC 62746-10-1:2018 specifies a minimal data model and services for demand response (DR), pricing, and distributed energy resource (DER) communications. This document can be leveraged to manage customer energy resources,... | |
| IEC 62746-10-3:2018 defines and describes methods and example XML artefacts that can be used to build a conformant adapter to enable interoperation between a utility distributed automation or demand response... | |
| IEC 62746-4:2024 describes CIM profiles for Demand-Side Resource Interface and is based on the use case shown in Annex A of this document. Schemas associated with this document were generated... | |
| IEC 62747:2014 defines terms for the subject of self-commutated voltage-sourced converters used for transmission of power by high voltage direct current (HVDC). The standard is written mainly for the case... | |
| IEC 62747:2014+A1:2019 defines terms for the subject of self-commutated voltage-sourced converters used for transmission of power by high voltage direct current (HVDC). The standard is written mainly for the case... | |
| IEC 62751-1:2014 sets out the general principles for calculating the power losses in the converter valves of a voltage sourced converter (VSC) for high-voltage direct current (HVDC) applications, independent of... | |
| IEC 62751-1:2014+A1:2018 sets out the general principles for calculating the power losses in the converter valves of a voltage sourced converter (VSC) for high-voltage direct current (HVDC) applications, independent of... | |
| IEC 62751-1:2014+AMD1:20 18+AMD2:2022 sets out the general principles for calculating the power losses in the converter valves of a voltage sourced converter (VSC) for high-voltage direct current (HVDC) applications, independent... | |
| IEC 62751-2:2014 gives the detailed method to be adopted for calculating the power losses in the valves for an HVDC system based on the "modular multi-level converter", where each valve... | |
| IEC 62751-2:2014+A1:2019 gives the detailed method to be adopted for calculating the power losses in the valves for an HVDC system based on the "modular multi-level converter", where each valve... | |
| IEC 62751-2:2014+AMD1:20 19+AMD2:2023 gives the detailed method to be adopted for calculating the power losses in the valves for an HVDC system based on the "modular multi-level converter", where each... | |
| IEC 62752:2016 applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as IC-CPD including control and safety functions. This standard... | |
| IEC 62752:2016+A1:2018 applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as IC-CPD including control and safety functions. This standard... | |
| IEC 62752:2024 This International Standard applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as "IC-CPD", including control and safety... | |
| IEC 62753:2015 specifies the basic functions, interfaces, performance requirements and test methods of the receivers for the Digital Terrestrial/Televisi on Multimedia Broadcasting (DTMB) system. This standard can be applied to... | |
| IEC 62754:2017 This document specifies methods for the computation of the temporal and amplitude parameters and their associated uncertainty for step-like and impulse-like waveforms. This document is applicable to any... | |
| IEC 62755:2012(E) provides a uniform format for data to be output from radiation measurement instruments for use in detection of illicit trafficking of radioactive materials. This enables interpretation of data... | |
| IEC 62755:2012+A1:2020 provides a uniform format for data to be output from radiation measurement instruments for use in detection of illicit trafficking of radioactive materials. This enables interpretation of data... | |
| IEC 62756-1:2015 specifies a protocol, electrical interface and test procedures for control of electronic lighting equipment by digital signals over the load side mains wiring. Safety requirements are not covered... | |
| IEC 62759-1:2015 describes methods for the simulation of transportation of complete package units of modules and combined subsequent environmental impacts. This standard is designed so that its test sequence can... | |
| IEC 62759-1:2022 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC... | |
| IEC 62759-1:2022 describes methods for the simulation of transportation of complete package units of modules and combined subsequent environmental impacts. This second edition cancels and replaces the first edition published... | |
| IEC 62760:2016 specifies the audio reproduction method for normalized loudness level of audio sources for consumer equipment and systems. | |
| IEC 62760:2016+A1:2019 specifies the audio reproduction method for normalized loudness level of audio sources for consumer equipment and systems. This consolidated version consists of the first edition (2016) and its... | |
| IEC 62761:2014-02(en-fr) gives the measurement method for nonlinear signals generated in the radio frequency (RF) surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices such as filters and duplexers,... | |
| IEC 62764-1:2022 specifies a methodology for determining the exposure to multiple magnetic field sources for passenger cars and light commercial vehicles including standardized operating conditions and measurement volumes and/or surfaces. | |
| IEC 62765-1:2015 provides strategies, technical requirements, and recommended practices for the management of ageing to ensure that ageing of pressure transmitters important to safety in nuclear power plants (NPPs) can... | |
| IEC 62765-2:2019 identifies minimum requirements and applicable practices for correcting and preventing any potential impacts on nuclear power plant (NPP) safety due to the ageing of temperature sensors, such as... | |
| IEC 62766-1:2017(E) defines general common elements and specifies the structure of the IEC 62766 series, the scopes of, and relationships between the other parts | |
| IEC 62766-2-1:2016 specifies formats for the audio/video content provided by IPTV services using fixed line access networks or mobile access networks and voice and video telephony services. It does not... | |
| IEC 62766-2-2:2016 specifies media formats for adaptive unicast content streaming over HTTP. Two HTTP adaptive streaming formats are specified. The first is based entirely on MPEG DASH. The second is... | |
| IEC 62766-3:2016 specifies the aspects concerning content metadata. | |
| IEC 62766-4-1:2017(E) specifies the protocols, which apply to the following reference point interfaces identified in the architecture described in Annex B of IEC 62766-1:2017. - The UNI interfaces, between the... | |
| IEC 62766-4-2:2017(E) provides informative examples of features defined in IEC 62766-4-1. | |
| IEC 62766-5-1:2017(E) specifies the Declarative Application Environment (DAE) component of the OIPF terminal function (OITF). The DAE is a declarative language based environment (browser) based on the OIPF web standards... | |
| IEC 62766-5-2:2017(E) specifies a profile of HTML5, CSS and other related web technologies for connected TVs. Its goal is to describe a common profile that can be relied on by... | |
| IEC 62766-6:2017(E) specifies the procedural application environment (PAE) component of the OIPF terminal function (OITF). It also defines the UNI reference point UNIS-12 of the OIPF functional architecture summarised in... | |
| IEC 62766-7:2017(E) specifies functions for content protection, service protection, service access protection, user identification, user authentication, and user authorisation. | |
| IEC 62766-8:2017(E) defines three example profiles that may be adopted for implementation in suitable devices. | |
| IEC 62769-100:2020 specifies an FDI profile of IEC 62769 for generic protocols. That means that all interfaces are defined, and a host can add support for more protocols without changing... | |
| IEC 62769-100:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-100:2023 specifies an FDI®[1] profile of IEC 62769 for Generic Protocols. That means that all interfaces are defined and a host can add support for more protocols without changing... | |
| IEC 62769-101-1:2015 specifies an FDI profile of IEC 62769 for IEC 61784-1_CP 1/1 (FOUNDATION Fieldbus H1). | |
| IEC 62769-101-1:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-101-1:2020 specifies the IEC 62769 profile for IEC 61784 1_CP 1/1 (FOUNDATION™ Fieldbus H1) . | |
| IEC 62769-101-1:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-101-1:2023 specifies an FDI®[1] profile of IEC 62769 for IEC 61784‑1_CP 1/1 (Foundation™ Fieldbus H1)[2]. [1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This... | |
| IEC 62769-101-2:2015 specifies an FDI profile of IEC 62769 for IEC 61784-1, CP 1/2 (FOUNDATION Fieldbus HSE). | |
| IEC 62769-101-2:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-101-2:2020 specifies the IEC 62769 profile for IEC 61784 1, CP 1/2 (FOUNDATION™ Fieldbus HSE). | |
| IEC 62769-101-2:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-101-2:2023 specifies the IEC 62769 profile for IEC 61784‑1, CP 1/2 (Foundation™ Fieldbus HSE)[1]. [1] Foundation™ Fieldbus is the trade name of the non-profit consortium Fieldbus Foundation. This information... | |
| IEC 62769-102-2:2023 defines the protocol-specific definitions (PSDs) as defined in IEC 62769‑100 (annex on generic protocol extensions) for the Ethernet/IP protocol. | |
| IEC 62769-103-1:2015 specifies an FDI profile of IEC 62769 for IEC 61784-1_CP 3/1 (PROFIBUS DP) and IEC 61784-1_CP3/2 (PROFIBUS PA). | |
| IEC 62769-103-1:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-103-1:2020 specifies an FDI profile of IEC 62769 for IEC 61784 1_CP 3/1 (PROFIBUS DP) and IEC 61784 1_CP3/2 (PROFIBUS PA). This second edition cancels and replaces the first... | |
| IEC 62769-103-1:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-103-1:2023 specifies an FDI®[1] profile of IEC 62769 for IEC 61784-1_CP 3/1 (PROFIBUS DP)[2] and IEC 61784-1_CP3/2 (PROFIBUS PA). [1] FDI is a registered trademark of the non-profit organization... | |
| IEC 62769-103-4:2015 specifies an FDI profile of IEC 62769 for IEC 61784-2_CP 3/4, IEC 61784-2_CP3/5 and IEC 61784-2_CP3/6 (PROFINET) | |
| IEC 62769-103-4:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-103-4:2020 specifies an FDI profile of IEC 62769 for IEC 61784-2_CP 3/4, IEC 61784-2_CP3/5 and IEC 61784-2_CP3/6 (PROFINET). This second edition cancels and replaces the first edition published in... | |
| IEC 62769-103-4:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-103-4:2023 specifies an FDI®[1] profile of IEC 62769 for IEC 61784-2_CP 3/4, IEC 61784-2_CP3/5 and IEC 61784-2_CP3/6 (PROFINET[2]). [1] FDI is a registered trademark of the non-profit organization Fieldbus... | |
| IEC 62769-109-1:2015 specifies an FDI profile of IEC 62769 for IEC 61784-1_CP 9/1 (HART®) and IEC 61784-1_CP 9/2 (WirelessHART®). | |
| IEC 62769-109-1:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-109-1:2020 specifies an FDI profile of IEC 62769 for IEC 61784 1_CP 9/1 (HART®) and IEC 61784 1_CP 9/2 (WirelessHART®). This second edition cancels and replaces the first edition... | |
| IEC 62769-109-1:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-109-1:2023 specifies an FDI®[1] profile of IEC 62769 for IEC 61784‑1_CP 9/1 (HART®)[2] and IEC 61784‑1_CP 9/2 (WirelessHART®)[3]. [1] FDI is a registered trademark of the non-profit organization Fieldbus... | |
| IEC 62769-115-2:2020 defines the protocol-specific definitions (PSDs) as defined in IEC 62769-7 on generic protocol extensions for the Modbus® -RTU protocol in accordance with CPF 15 in IEC 61784 2. | |
| IEC 62769-150-1:2021 specifies an FDI profile for IEC 62734 (ISA100 WIRELESS) | |
| IEC 62769-150-1:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-150-1:2023 specifies an FDI profile of IEC 62769 for IEC 62734 (ISA100.11a)[1]. [1] ISA100 WIRELESSTM is a trade name of the non-profit consortium Wireless Compliance Institute. This information is... | |
| IEC 62769-151-1:2023 defines the protocol-specific definitions (PSDs) as defined in IEC 62769‑7 for the OPC UA protocol. | |
| IEC 62769-1:2015 describes the concepts and overview of the Field Device Integration (FDI) specifications. The detailed motivation for the creation of this technology is also described. It helps to understand... | |
| IEC 62769-1:2021 describes the concepts and overview of the Field Device Integration (FDI) specifications. The detailed motivation for the creation of this technology is also described (see 4.1). Reading this... | |
| IEC 62769-1:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-1:2023 describes the concepts and overview of the Field Device Integration (FDI®[1]) specifications. The detailed motivation for the creation of this technology is also described . Reading this document... | |
| IEC 62769-1:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-2:2015 specifies the FDI Client. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in... | |
| IEC 62769-2:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-2:2021 specifies the FDI Client. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in... | |
| IEC 62769-2:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-2:2023 specifies the FDI®[1] Client. See Annex C for some typical FDI® Client use cases. The overall FDI® architecture is illustrated in Figure 1. The architectural components that are... | |
| IEC 62769-3:2015 specifies the FDI Server. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in... | |
| IEC 62769-3:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-3:2021 specifies the FDI Server. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in... | |
| IEC 62769-3:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-3:2023 specifies the FDI®[1] Server. The overall FDI® architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in... | |
| IEC 62769-4:2015 specifies the FDI Packages. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in... | |
| IEC 62769-4:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-4:2021 specifies the FDI Packages. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in... | |
| IEC 62769-4:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-4:2023 specifies the FDI®[1] Packages. The overall FDI® architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in... | |
| IEC 62769-5:2015 defines the FDI Information Model. One of the main tasks of the Information Model is to reflect the topology of the automation system. Therefore it represents the devices... | |
| IEC 62769-5:2021 defines the FDI Information Model. One of the main tasks of the Information Model is to reflect the topology of the automation system. Therefore, it represents the devices... | |
| IEC 62769-5:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-5:2023 defines the FDI®[1] Information Model. One of the main tasks of the Information Model is to reflect the topology of the automation system. Therefore, it represents the devices... | |
| IEC 62769-5:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-6-100:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation regarding the components FDI® Client and User... | |
| IEC 62769-6-200:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation regarding the components FDI® Client and User... | |
| IEC 62769-6:2015 specifies the technology mapping for the concepts described in the Field Device Integration (FDI) standard. The technology mapping focuses on implementation regarding the components FDI Client and User... | |
| IEC 62769-6:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-6:2021 specifies the technology mapping for the concepts described in the Field Device Integration (FDI) standard. The technology mapping focuses on implementation regarding the components FDI Client and User... | |
| IEC 62769-6:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-6:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation of the components FDI® Client and User... | |
| IEC 62769-7:2015 specifies the elements implementing communication capabilities called Communication Devices. | |
| IEC 62769-7:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-7:2021 specifies the elements implementing communication capabilities called Communication Devices (IEC 62769-5). The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope... | |
| IEC 62769-7:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62769-7:2023 specifies the elements implementing communication capabilities called Communication Devices. The overall FDI®[1] architecture is illustrated in Figure 1. The architectural components that are within the scope of this... | |
| IEC 62769-8:2023 specifies how the internal view of a device model represented by the EDD can be transferred into an external view as an OPC-UA information model by mapping EDD... | |
| IEC 62770:2013 describes specifications and test methods for unused natural esters in transformers and similar oil-impregnated electrical equipment in which a liquid is required as an insulating and heat transfer... | |
| IEC 62770:2024 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC... | |
| IEC 62770:2024 describes specifications and test methods for unused natural esters in transformers and similar liquid-immersed electrical equipment in which a liquid is required as an insulating and heat transfer... | |
| IEC 62772:2016 applies to composite hollow core station post insulators consisting of a load-bearing insulating tube (core) made of resin impregnated fibres an insulating filler material (e.g. solid, liquid, foam,... | |
| IEC 62772:2023 applies to composite hollow core station post insulators consisting of a load-bearing insulating tube (core) made of resin impregnated fibres, insulating filler material (solid, liquid, gaseous – pressurized... | |
| IEC 62772:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62776:2014 specifies the safety and interchangeability requirements, and the exchange operation together with the test methods and conditions required to show compliance of double-capped LED lamps with G5 and... | |
| IEC 62777:2016 determines of the performance of directional loudspeaker array systems, compares these system types, and determines their proper practical application, by listing the characteristics which are useful for their... | |
| IEC 62779-1:2016 defines general requirements for a semiconductor interface used in human body communication (HBC). It includes general and functional specifications of the interface, as well as limiting values and... | |
| IEC 62779-2:2016 defines a measurement method on electrical performances of an electrode that composes a semiconductor interface for human body communication (HBC). In the measurement method, a signal transmitter is... | |
| IEC 62779-3:2016 defines a functional type of a semiconductor interface for human body communication (HBC). This part includes the categorization of the interface for HBC according to the contact condition; | |
| IEC 62779-4:2020 defines general requirements on the electrical performances of a semiconductor interface for capsule endoscope using galvanic coupling human body communication. It includes general and functional specifications of the... | |
| IEC 62783-1-1:2022 specifies time domain test methods, parameters and requirements for fixtures for twinax cables (known also as twin-axial cables or twin-coaxial cables) used in digital communication systems. The methods... | |
| IEC 62783-1:2019(E) specifies definitions and requirements of twinax cables used in digital communication systems. These cables are intended to be used in indoor applications. This generic specification details the requirements... | |
| IEC 62783-1:2023 specifies definitions, requirements and test methods of twinax cables used in digital communication systems: computer rooms, data centres, servers, etc. These cables are intended to be used indoors. | |
| IEC 62783-2:2019 covers indoor cables and specifies the definitions and requirements of twin-axial cables used in digital communication systems. This document, which is a family specification, gives additional requirements for... | |
| IEC 62784:2017 covers electrical mobile motor-operated vacuum cleaners Equipment Protection Level (EPL) Dc. This includes dust extractors, for wet suction or dry suction, intended for commercial indoor use with or... | |
| IEC 62784:2017+A1:2019 covers electrical mobile motor-operated vacuum cleaners Equipment Protection Level (EPL) Dc. This includes dust extractors, for wet suction or dry suction, intended for commercial indoor use with or... | |
| IEC 62787:2021 specifies the minimum requirements for the qualification of concentrator photovoltaic (CPV) cells and Cell on Carrier (CoC) assemblies for incorporation into CPV receivers, modules and systems. The object... | |
| Standard | |
| The contents of the corrigendum of March 2023 have been included in this copy. | |
| The purpose of IEC 62680-1-6:2019 is to create a higher level of interoperability among Hosts and Audio Devices. By establishing a set of essential audio features, users can expect a... |
| << Prev | Next >> |