IEC - International Electrotechnical Commission Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| A 15% discount of the total catalogue price is included. This pack contains the following: IEC 61970-1:2005 IEC TS 61970-2:2004 IEC 61970-301:2020+AMD1: 2022 CSV IEC 61970-302:2024 IEC 61970-401:2022 IEC 61970-452:2021... | |
| Amendment 1 | |
| Applicable to thermal-resistant aluminium alloy wires before stranding for manufacture of stranded conductors for overhead lines. It specifies the mechanical, electrical and thermal resistant properties of wires in the diameter... | |
| Applies only to newly manufactured "combined meters", measuring more than one type of electric energy (e.g. active and reactive) and meters integrating additional functions which are not in the scope... | |
| Applies only to newly manufactured static var-hour meters of accuracy classes 2 and 3, for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks... | |
| Applies only to newly manufactured static watt-hour meters of accuracy classes 0,2 S and 0,5 S, for the measurement of alternating current electrical active energy in 50 Hz or 60... | |
| Applies only to newly manufactured static watt-hour meters of accuracy classes 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks... | |
| Applies to auxiliary contact units associated (or intended to be associated) with circuit-breakers for overcurrent protection, and with residual current operated circuit-breakers with or without integral overcurrent protection for household... | |
| Applies to connectors with rated voltages above 50 V and up to 1 000 V and rated currents up to 125 A per contact, for which either no detail specification... | |
| Applies to electronic direct a.c. converter systems with electrical energy storage means in the d.c. link. Ensures continuity of an alternating power source. Also includes the method of specifying all... | |
| applies to electronic uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is to be used with IEC 60950-1 which is referred to in... | |
| Applies to failure mechanisms for interconnnecting devices and passive components. It introduces a choice of relevant tests from the IEC 61300 series tests for each known failure mechanism and failure... | |
| Applies to fibre optic connector sets and contains the minimum test and measurement requirements and severities which a fibre optic connector set shall satisfy in order to be qualified as... | |
| Applies to fibre optic passive dispersion compensators which are wavelength sensitive and may be polariyation sentive. Establishes uniform requirements and quality assessment procedures. | |
| Applies to interfaces between low-voltage switchgear and controlgear switching elements, and controllers (e.g. programmable controllers, personal computers, etc. This standard specifies a bit-oriented interface-system between a single control circuit device... | |
| Applies to interfaces between low-voltage swithgear, controlgear, and controllers (e.g. programmable controllers, personal computers, etc.). This standard does not apply to higher level industrial communication networks that have become known... | |
| Applies to letter and graphical symbols intended for marking on and identifying the function of electromechanical or static a.c. electricity meters and their auxiliary devices.The symbols specified in this standard... | |
| Applies to machines covered by IEC 60034-1 when they cannot be loaded to a specific condition (rated or otherwise) for whatever reason. It is applicable to both motors and generators... | |
| Applies to magnetic cores made of soft magnetic materials used in inductors, transformers and devices used to suppress electromagnetic interference. Provides guidance for the specification of measuring methods for both... | |
| Applies to passive, two-wire, externally powered pulse output devices to be used in electricity meters as defined by the relevant standards of technical committee 13 as well as future standards... | |
| Applies to residual current monitors having rated voltages not exceeding 440 V a.c. and rated currents not exceeding 125 A for household and similar purposes. This standard applies to monitors... | |
| Applies to single UPS units or UPS systems comprising a number of interconnected UPS and associated control/switchgear forming a single power system, intended to be installed in any operator accessible... | |
| Applies to the family of fibre optic filters. These are passive components used to select specific wavelengths. The standard covers their optical, mechanical and envoronmental properties; as well as the... | |
| Contains application dimensions for cases. The dimensions have been derived by selection from the sectional standard IEC 61969-2 and follow the equipment mounting dimensions given in IEC 60917-2-1. | |
| Contains the definitions and designations related to, and the general requirements to be fulfilled by, industrial, rigid, moulded, laminated tubes of rectangular cross-section and rods of rectangular and hexagonal cross-section. | |
| Covers d.c. metal-enclosed and non-metallic enclosed switchgear assemblies used in indoor stationary installations of traction systems, with nominal voltage not exceeding 3 000 V. | |
| Covers particular requirements for surge arresters for specific use in fixed installations of d.c. traction systems. They consist of one or more non-linear resistors which may be in series with... | |
| Covers the application, specification, theory of operation, and factory and field testing of single phase and three-phase oil-immersed phase-shifting transformers (PSTs). Provides guidance to those specifying, designing, and using PSTs. | |
| Covers type tests for electricity metering equipment for indoor and outdoor application and to newly manufactured equipment designed to measure the electric energy on 50 Hz or 60 Hz networks,... | |
| Deals with the test methods for industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes. The test methods include the... | |
| Defines a basis for reliability tests for passive optical components. It provides advice on life testing procedures, the calculation of failure rates and presentation of results. A worked example illustrates... | |
| Defines an installed monitor for the control and detection of radioactivity of gamma emitters contained in recyclable or non-recyclable materials transported by vehicle, the conceptual requirements, general characteristics, mechanical characteristics,... | |
| Defines test methods for evaluating environmental and mechanical endurance characteristics of plasma display modules (PDP modules). | |
| Defines the Common Information Model Base set of packages which provide a logical view of the physical aspects of Energy Management System information. Is part of the IEC 61970 series,... | |
| Defines the identification codes (ID-codes) for commonly used data items in electricity metering equipment. This part of IEC 62056 specifies the overall structure of the identification system and the mapping... | |
| Describes a common set of procedures for estimating the reliability of fibre optic connectors, splices, branching devices and other passive components. This part specifically deals with component reliability as estimated... | |
| Describes a procedure for determination of the acidity of unused and used electrical mineral insulating oils. The method may be used to indicate relative changes that occur in a mineral... | |
| Describes hardware and protocol specifications for local meter data exchange. In such systems, a hand-held unit (HHU) or a unit with equivalent functions is connected to a tariff device or... | |
| Describes product screening. A proper product screen is actually a process, not a test. As a process, it is maintained and constantly validated to ensure it achieves the purpose for... | |
| Describes the measuring methods applicable to the semiconductor devices to be used in the field of fibre optic systems and subsystems. This consolidated version consists of the first edition (1997)... | |
| Describes the measuring methods applicable to the semiconductor devices to be used in the field of fibre optic systems and subsystems. | |
| Describes the procedure for the determination of the acidity of unused and used electrical mineral insulating oils. The method may be used to indicate relative changes that occur in a... | |
| Describes two new architectures for local bus data exchange with stations either energized or not. For non-energized stations, the bus supplies energy for data exchange. The first architecture completes the... | |
| Determines the following measuring methods for characterising the performance of colour plasma display modules: a) bright-room contrast ratio; b) module power and current consumption, c) module luminous efficacy. | |
| Determines the measuring methods for characterizing the performance of colour plasma display modules in the following areas: 4 % window luminance; luminance uniformity; dark-room contrast ratio; white chromaticity and chromatic... | |
| Establishes defined levels of physical performance in order to meet the requirements of storage, transport and final location conditions. Provides a common base for the comparison and selection of products... | |
| Establishes requirements to describe terms, to give recommendations for standard values and dimensions and to give guidance on fixed, surface mounted inductors. | |
| Establishes two methods for determination of efficiency: Method 1: for motors tested by using a torque measurement device, with additional load losses derived from measurements; Method 2: for motors tested... | |
| Gives guidance for the drafting of those parts of specifications for magnetic cores that are concerned with measuring methods for magnetic and electric core properties. Applies to magnetic cores, mainly... | |
| Gives specifications for electronic behavioral of digital integrated circuit input/ output analog characteristics. It specifies a consistent software-parsable format for essential behavioral information. The goal of this standard is to... | |
| Gives the essential ratings and characteristics of the following categories of semiconductor optoelectronic devices to be used in the field of fibre optic systems and subsystems: semiconductor photoemitters, semiconductor photoelectric... | |
| Gives the preferred terms, their definitions and symbols for colour AC plasma display panels (AC PDP); with the object of using the same terminology when publications are prepared in different... | |
| Gives the requirements for industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based upon thermosetting resins for electrical purposes. Applications and distinguishing properties are given. Definitions,... | |
| Gives the requirements for isolating current transducers and other current measuring devices used in d.c. railway applications, fixed installations. | |
| Gives the requirements for isolating voltage transducers and other voltage measuring devices used in d.c. railway applications, fixed installations. | |
| IEC 61696-2:2011 applies to the design of enclosures for outdoor applications for stationary use at non-weatherprotected locations as defined in IEC 61969-1 Ed.2.0. The internal and external coordination dimensions are... | |
| IEC 61969-3:2011 specifies a set of basic environmental requirements and tests, as well as safety aspects for outdoor enclosures under conditions of non-weatherprotected locations above ground. The purpose of this... | |
| IEC 61969-3:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 61969-3:2020 specifies a set of basic environmental requirements and tests, as well as safety aspects for outdoor enclosures under conditions of non-weather protected locations above ground. The purpose of... | |
| IEC 61969-3:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 61969-3:2023 specifies a set of basic environmental requirements and tests, as well as safety aspects for outdoor enclosures for electrical and electronic equipment, under conditions of non-weatherprotected locations above... | |
| IEC 61970-301:2009(E) defines the Common Information Model (CIM) base set of packages which provide a logical view of the physical aspects of an energy management system including SCADA (Supervisory Control... | |
| IEC 61970-301:2011 deals with the common information model (CIM), an abstract model that represents all the major objects in an electric utility enterprise typically involved in utility operations. The object... | |
| IEC 61970-301:2013 deals with the common information model (CIM), an abstract model that represents all the major objects in an electric utility enterprise typically involved in utility operations. The object... | |
| IEC 61970-301:2013 defines the Common Information Model (CIM), that is an abstract model representing all the major objects in an electric utility enterprise typically involved in utility operations. By providing... | |
| IEC 61970-301:2016 lays down the common information model (CIM), which is an abstract model that represents all the major objects in an electric utility enterprise typically involved in utility operations. | |
| IEC 61970-301:2016 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 61970-301:2020 lays down the common information model (CIM), which is an abstract model that represents all the major objects in an electric utility enterprise typically involved in utility operations. | |
| IEC 61970-301:2020+AMD1: 2022 lays down the common information model (CIM), which is an abstract model that represents all the major objects in an electric utility enterprise typically involved in utility... | |
| IEC 61970-302:2018 specifies a Dynamics package which contains extensions to the CIM to support the exchange of models between software applications that perform analysis of the steady-state stability (small-signal stability)... | |
| IEC 61970-302:2024 specifies a Dynamics package which contains part of the CIM to support the exchange of models between software applications that perform analysis of the steady-state stability (small-signal stability)... | |
| IEC 61970-401:2022 describes how IEC 61970-450 (all parts), IEC 61970-600 (all parts) profile specifications are structured and created. Profile specifications describe a subset of the Canonical CIM dedicated to a... | |
| IEC 61970-402:2008(E) provides the base functionality considered necessary and common that is provided by neither the normative standards incorporated by reference nor the new APIs specified in the IEC 61970-403... | |
| IEC 61970-403:2008(E) provides a generic request/reply-orient ed data access mechanism for applications from independent suppliers to access CIM data in combination with IEC 61970-402. An application is expected to use... | |
| IEC 61970-452:2013 rigorously defines the subset of classes, class attributes, and roles from the CIM necessary to execute state estimation and power flow applications. This international standard is intended for... | |
| IEC 61970-452:2015 rigorously defines the subset of classes, class attributes, and roles from the CIM necessary to execute state estimation and power flow applications. These requirements are based on prior... | |
| IEC 61970-452:2017 defines the subset of classes, class attributes, and roles from the CIM necessary to execute state estimation and power flow applications. This standard is intended for two distinct... | |
| IEC 61970-452:2021 defines the subset of classes, class attributes, and associations from the CIM necessary to execute state estimation and power flow applications between control centres and/or control centre components,... | |
| IEC 61970-453:2008(E) defines, at an abstract level, the content and exchange mechanisms used for data transmitted between control center components. Includes the general use cases for exchange of graphic schematic... | |
| IEC 61970-453:2014 is a member of the IEC 61970-450 to 499 series that, taken as a whole, defines, at an abstract level, the content and exchange mechanisms used for data... | |
| IEC 61970-453:2014+A1:20 18 is a member of the IEC 61970-450 to 499 series that, taken as a whole, defines, at an abstract level, the content and exchange mechanisms used for... | |
| IEC 61970-456:2013 defines the subset of classes, class attributes, and roles from the CIM necessary to describe the result of state estimation, power flow and other similar applications that produce... | |
| IEC 61970-456:2013+A1:20 15(E) defines the subset of classes, class attributes, and roles from the CIM necessary to describe the result of state estimation, power flow and other similar applications that... | |
| IEC 61970-456:2018 rigorously defines the subset of classes, class attributes, and roles from the CIM necessary to describe the result of state estimation, power flow and other similar applications that... | |
| IEC 61970-456:2021 belongs to the IEC 61970-450 to IEC 61970-499 series that, taken as a whole, defines at an abstract level the content and exchange mechanisms used for data transmitted... | |
| IEC 61970-457:2021 specifies a standard interface for exchanging dynamic model information needed to support the analysis of the steady state stability (small-signal stability) and/or transient stability of a power system... | |
| IEC 61970-457:2024 specifies a standard interface for exchanging dynamic model information needed to support the analysis of the steady state stability (small-signal stability) and/or transient stability of a power system... | |
| IEC 61970-552:2013 specifies a Component Interface Specification (CIS) for Energy Management Systems Application Program Interfaces. This part specifies the format and rules for exchanging modelling information based upon the CIM. | |
| IEC 61970-552:2016 specifies the format and rules for exchanging modelling information based upon the CIM. It uses the CIM RDF Schema presented in IEC 61970-501 as the meta-model framework for... | |
| IEC 61970-600-1:2021 covers the definition of Common Grid Model Exchange Standard (CGMES), defines the main rules and application’s requirements to meet business requirements for assembled and merged model to fit... | |
| IEC 61970-600-2:2021 defines the profiles included in the Common Grid Model Exchange Standard (CGMES) that are based on IEC 61970-450-series and IEC 61968-13 profiles. This document refers to the IEC... | |
| IEC 61975:2010 applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The tests... | |
| IEC 61975:2010+A1:2016 applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The tests... | |
| IEC 61975:2010+AMD1:2016 +AMD2:2022 applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The... | |
| IEC 61977:2010(E) applies to the family of fibre optic filters. These are passive components used to select specific wavelengths. The standard covers their optical, mechanical and envoronmental properties; as well... | |
| IEC 61977:2015 applies to the family of fibre optic filters. These components have all of the following general features: - they are passive for the reason that they contain no... | |
| IEC 61977:2020 applies to the family of fibre optic filters. These components have all of the following general features: - they are passive for the reason that they contain no... | |
| IEC 61977:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 61978-1:2009 applies to fibre optic passive chromatic dispersion compensators, all exhibiting the following features: - they are optically passive; - they have an optical input and an optical output... | |
| IEC 61978-1:2014 applies to fibre optic passive chromatic dispersion compensators, all exhibiting the following features: - they are optically passive; - they have an optical input and an optical output... | |
| IEC 61978-1:2024 applies to fibre optic passive chromatic dispersion compensators, all exhibiting the following features: - they are optically passive; - they have an optical input and an optical output... | |
| IEC 61978-1:2024 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 61980-1:2015 applies to the equipment for the wireless transfer of electric power from the supply network to electric road vehicles for purposes of supplying electric energy to the RESS... | |
| IEC 61980-1:2020 applies to the supply device for charging electric road vehicles using wireless methods at standard supply voltages per IEC 60038 up to 1 000 V AC and up... | |
| IEC 61980-2:2023 addresses communication and activities of magnetic field wireless power transfer (MF-WPT) systems. The requirements in this document are intended to be applied for MF-WPT systems according to IEC... | |
| IEC 61980-3:2022 applies to the off-board supply equipment for wireless power transfer via magnetic field (MF-WPT) to electric road vehicles for purposes of supplying electric energy to the RESS (rechargeable... | |
| IEC 61982-4:2015 specifies test procedures and acceptance criteria for safety performance of nickel-metal hydride (Ni-MH) secondary cells and modules used for the propulsion of electric vehicles (EV) including battery electric... | |
| IEC 61982:2012 is applicable to performance and endurance tests for secondary batteries used for vehicle propulsion applications. This standard is applicable to lead-acid batteries, Ni/Cd batteries, Ni/MH batteries and sodium... | |
| IEC 61984:2008 applies to connectors with rated voltages above 50 V and up to 1000 V a.c. and d.c. and rated currents up to 125 A per contact, for which... | |
| IEC 61987-10:2009 provides a method of standardizing the descriptions of process control devices, instrumentation and auxiliary equipment as well as their operating environments and operating requirements (for example, measuring point... | |
| IEC 61987-11:2012 provides a characterisation of industrial process measuring equipment (device type dictionary) for integration in the Component Data Dictionary (CDD) and generic structures for Operating Lists of Properties (OLOPs)... | |
| IEC 61987-11:2016 provides: - a characterisation of industrial process measuring equipment (device type dictionary) for integration in the Common Data Dictionary (CDD), and - generic structures for operating lists of... | |
| IEC 61987-12:2016 provides an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for a flow measuring equipment and device lists of... | |
| IEC 61987-13:2016 provides an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for a pressure measuring equipment, and device lists of... | |
| IEC 61987-14:2016 provides an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for temperature measuring equipment and device lists of properties... | |
| IEC 61987-15:2016 provides operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for level measuring equipment, and device lists of properties (DLOPs)... | |
| IEC 61987-16:2016 provides an - operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for a density measuring equipment, and - device... | |
| IEC 61987-1:2006 defines a generic structure in which product features of industrial-process measurement and control equipment with analogue or digital output should be arranged, in order to facilitate the understanding... | |
| IEC 61987-1:2024 defines a generic structure in which product features of industrial process measurement devices shall be arranged, in order to facilitate the understanding of product descriptions when they are... | |
| IEC 61987-1:2024 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 61987-21:2015 provides a characterization for the integration of automated valves, including control valves, automated on/off-valves and process regulators, in the Common Data Dictionary (CDD); generic structures in conformance with... | |
| IEC 61987-22:2015 provides Operating Lists of Properties (OLOP) for the description of the operating parameters and the collection of requirements for valve body assemblies and process regulators, Device Lists of... | |
| IEC 61987-23:2015 provides Operating Lists of Properties (OLOPs) for the description of the operating parameters and the collection of requirements for valve actuators, Device Lists of Properties (DLOPs) for valve... | |
| IEC 61987-24-1:2015 provides Operating Lists of Properties (OLOPs) for the description of the operating parameters and the collection of requirements for valve/actuator accessories, that can be used for every valve/actuator... | |
| IEC 61987-24-2:2017 provides - an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for accessories attached to automated valves, listed in... | |
| IEC 61987-24-3:2017 provides - an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for flow modification accessories for automated valves, listed... | |
| IEC 61987-31:2022 provides a characterization for the integration of infrastructure devices in the Common Data Dictionary (CDD); generic structures in conformance with IEC 61987-10 for Operating Lists of Properties (OLOPs)... | |
| IEC 61987-32:2024 This part of IEC 61987 provides an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for I/O modules and... | |
| IEC 61987-92:2018 provides the lists of properties (LOPs) describing aspects of equipment for industrial-process automation that is subject to IEC 61987 standard series. This standard series proposes a method for... | |
| IEC 61988-1:2011 gives the preferred terms, their definitions and symbols for colour AC plasma display panels (AC PDP); with the object of using the same terminology when publications are prepared... | |
| IEC 61988-2-1:2012 determines the following measuring methods for characterizing the performance of plasma display modules (PDP modules): a) four per cent (4 %) window luminance; b) luminance uniformity; c) dark-room... | |
| IEC 61988-2-3:2009 determines the measuring methods for defects and degradation of colour plasma display (PDP) module in the following areas: a) cell defects; b) image sticking; c) luminance. | |
| IEC 61988-2-4:2011 determines the measuring methods for characterizing the performance of plasma display panel (PDP) modules in the following areas: a) viewing angle; b) image streaking; c) flicker; d) moving... | |
| IEC 61988-2-5:2012 determines the measuring methods for characterizing the performance of PDP modules (plasma display modules): Acoustic noise. | |
| IEC 61988-2-6:2015(E) defines the measuring methods for gamma and colour gamut characteristics as a function of the APL for a PDP module (plasma display module). Generally, the luminance level of... | |
| IEC 61988-3-2:2009 defines the electrical interface of digital video data signals, synchronization signals and functional signals between the image processing board of the PDP set and the control board of... | |
| IEC 61988-4-1:2015(E) defines the following test methods for evaluating the climatic and mechanical endurance characteristics of plasma display modules (PDP modules): temperature and humidity tests, air pressure tests and mechanical... | |
| IEC 61988-4-2:2012 defines testing methods for evaluating mechanical characteristics of plasma display modules (PDP modules) in the following areas: a) Ball drop breaking strength of panels; b) Partial heating strength... | |
| IEC 61988-5:2009 is a generic specification for plasma display panels specifies general procedures for quality assessment to be used in the IECQ System and establishes general principles for describing and... | |
| IEC 61991:2019 defines requirements applied in the design and manufacture of electrical installations and equipment to be used on rolling stock to protect persons from electric shocks. This document is... | |
| IEC 61991:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 61992 series specifies requirements for d.c. switchgear and controlgear and is intended to be used in fixed electrical installations with nominal voltage not exceeding 3 000 V d.c., which... | |
| IEC 61992-1:2006+A1:2014 specifies requirements for d.c. switchgear and controlgear and is intended to be used in fixed electrical installations with nominal voltage not exceeding 3 000 V d.c., which supply... | |
| IEC 61992-2:2006+A1:2014 Specifies requirements for d.c. circuit-breakers for use in fixed installations of traction systems. This consolidated version consists of the second edition (2006) and its amendment 1 (2014). Therefore,... | |
| IEC 61992-3:2006+A1:2015 Specifies requirements for d.c. disconnectors, switch-disconnectors and earthing switches for use in indoor fixed installations of traction systems. This consolidated version consists of the second edition (2006) and... | |
| IEC 61992-4:2006+A1:2015 Specifies requirements for d.c. disconnectors, switch-disconnectors and earthing switches for use in outdoor fixed installations of traction systems. This consolidated version consists of the first edition (2006) and... | |
| IEC 61992-6:2006+A1:2014 Covers d.c. metal-enclosed and non-metallic enclosed switchgear assemblies used in indoor stationary installations of traction systems, with nominal voltage not exceeding 3 000 V. This consolidated version consists... | |
| IEC 61992-6:2006+A1:2014 +A2:2020 covers d.c. metal-enclosed and non-metallic enclosed switchgear assemblies used in indoor stationary installations of traction systems, with nominal voltage not exceeding 3 000 V. This consolidated version... | |
| IEC 61993-1:1999 Specifies the performance requirements, technical characteristics, operational requirements, methods of testing and required test results for shipborne automatic transponder system installations using VHF digital selective calling (DSC) techniques. | |
| IEC 61993-2:2012(E) specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards adopted by the IMO in Resolution MSC.74(69), Annex 3, Shipborne... | |
| IEC 61993-2:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 61993-2:2018 specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards adopted by IMO in Resolution MSC.74(69):1998, Annex 3. This document... | |
| IEC 61995-1:2005 applies to devices for the connection of luminaires (DCL) intended for household and similar purposes, for the electrical connection of fixed luminaires to final circuits rated at not... | |
| IEC 61995-1:2005+A1:2016 applies to devices for the connection of luminaires (DCL) intended for household and similar purposes, for the electrical connection of fixed luminaires to final circuits rated at not... | |
| IEC 61995-2:2009 which is to be read in conjunction with IEC 61995-1, applies to devices for the connection of luminaires (DCL) 250 V, 6 A a.c. intended for household and... | |
| IEC 61995-2:2009+A1:2016 which is to be read in conjunction with IEC 61995-1, applies to devices for the connection of luminaires (DCL) 250 V, 6 A a.c. intended for household and... | |
| IEC 61996-1:2013 specifies the minimum performance requirements, technical characteristics, methods of testing and required test results, for shipborne voyage data recorder (VDR) installations as required by Chapter V of the... | |
| IEC 61996-1:2013+A1:2021 specifies the minimum performance requirements, technical characteristics, methods of testing and required test results, for shipborne voyage data recorder (VDR) installations as required by Chapter V of the... | |
| IEC 62002-1:2008 is a radio access specification for mobile, portable and hand-held portable devices capable of receiving DVB-T/H services. It includes informative system aspects as well as specifications for minimum... | |
| IEC 62002-2:2008 provides the conformance testing rules and guidelines for equipment built to meet the Mobile and portable DVB-T/H radio access interface specification (IEC 62002-1). One aim is to limit... | |
| IEC 62003:2009 establishes requirements for electromagnetic compatibility testing of instrumentation and control equipment supplied for use in systems important to safety at nuclear power plants. Lists the applicable IEC standards... | |
| IEC 62003:2020 establishes requirements for electromagnetic compatibility testing of instrumentation, control, and electrical equipment supplied for use in systems important to safety at nuclear power plants and other nuclear facilities. | |
| IEC 62005-9-1:2015 establishes a general reliability qualification program that applies to all passive fibre optic components except connectors and connector assemblies, the passing of which, suggests a minimum level of... | |
| IEC 62005-9-4:2018 gives the requirements for the reliability qualification of passive optical components when used in high optical power applications for the environmental category C. Keywords: reliability assurance at high... | |
| IEC 62006:2010 defines the test, the measuring methods and the contractual guarantee conditions for field acceptance tests of the generating machinery in small hydroelectric power installations. It applies to installations... | |
| IEC 62007-1:2008 provides a specification template for essential ratings and characteristics of the following categories of semiconductor optoelectronic devices to be used in the field of fibre optic systems and... | |
| IEC 62007-1:2015 is a specification template for essential ratings and characteristics of the following categories of semiconductor optoelectronic devices to be used in the field of fibre optic systems and... | |
| IEC 62007-1:2015+AMD1:20 22 is a specification template for essential ratings and characteristics of the following categories of semiconductor optoelectronic devices to be used in the field of fibre optic systems... | |
| IEC 62007-2:2009 describes the measuring methods applicable to the semiconductor optoelectronic devices to be used in the field of fibre optic digital communication systems and subsystems. This edition includes the... | |
| IEC 62014-4:2015(E) describes an eXtensible Markup Language (XML) schema for meta-data documenting intellectual property (IP) used in the development, implementation, and verification of electronic systems and an application programming interface... | |
| IEC 62014-5:2015(E) defines a standard XML format for representing electronic design intellectual property (IP) quality information, based on an information model for IP quality measurement. It includes a schema and... | |
| IEC 62020-1:2020 applies to residual current monitors for household and similar purposes, having rated operational voltages and a rated voltage of the monitored circuit not exceeding 440 V AC and... | |
| IEC 62021-3:2014 describes two procedures for the determination of the acidity of unused and used electrical non-mineral insulating oils. Method A is potentiometric titration and Method B is colourimetric titration. | |
| IEC 62023:2011 provides rules for applying a method of structuring technical information and documentation by using a main document (leading document) for the clustering of the information for each object. | |
| IEC 62024-1:2008 specifies electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in high frequency (over 100 kHz) range. This edition includes the following... | |
| IEC 62024-1:2017 specifies electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in high frequency (over 100 kHz) range. This third edition cancels and... | |
| IEC 62024-1:2024 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62024-1:2024 specifies the electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in the high frequency (over 100 kHz) range. This edition includes... | |
| IEC 62024-2:2008 specifies the measuring methods of the rated direct current limits for small inductors. Standardized measuring methods for the determination of ratings enable users to accurately compare the current... | |
| IEC 62024-2:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62024-2:2020 specifies the measuring methods of the rated direct current limits for small inductors. Standardized measuring methods for the determination of ratings enable users to accurately compare the current... | |
| IEC 62024-2:2024 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62024-2:2024 specifies the measuring methods of the rated DC limits for inductors as defined below. Standardized measuring methods for the determination of ratings enable users to accurately compare the... | |
| IEC 62025-1:2007 applies to fixed, surface mounted inductors and ferrite beads. Should conflict arise between these specifications and the detail specifications, the latter will take precedence. The object of this... | |
| IEC 62025-2:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62025-2:2019 specifies a test method for the non-electrical characteristics of the surface mounted device (SMD) inductors to be used for electronic and telecommunication equipment. The object of this part... | |
| IEC 62026-1:2019 applies to interfaces between low-voltage switchgear, controlgear, and controllers (e.g. programmable controllers, personal computers, etc.). This document does not apply to higher level industrial communication networks that have... | |
| IEC 62026-1:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62026-2:2008 specifies a method for communication between a single control device and switching elements, and establishes a system for the interoperability of components with the specified communication interfaces. The... | |
| IEC 62026-2:2008+A1:2019 specifies a method for communication between a single control device and switching elements, and establishes a system for the interoperability of components with the specified communication interfaces. The... | |
| IEC 62026-3:2008 specifies an interface system between single or multiple controllers, and control circuit devices or switching elements. The interface system uses two twisted shielded conductor pairs within one cable... | |
| IEC 62026-3:2014 specifies an interface system between single or multiple controllers, and control circuit devices or switching elements. The interface system uses two conductor pairs within one cable - one... | |
| IEC 62026-7:2010 specifies an interface system providing bit-level and word-level communication between a controller and control circuit devices such as sensors, actuators, and switching elements. The interface system uses cabling... | |
| IEC 62027:2011 provides rules and guidelines for the presentation of information in object lists, and specific rules for such documents. It is applicable to object lists such as parts lists,... | |
| IEC 62028:2002 describes standard conditions and methods of measurement on digital television receivers which receive digital television broadcast transmissions. It deals with the determination of performance and allows the comparison... | |
| IEC 62031:2008+A1:2012 specifies general and safety requirements for light-emitting diode (LED) modules: - LED modules without integral control gear for operation under constant voltage, constant current or constant power; -... | |
| IEC 62031:2008+A1:2012+A 2:2014 specifies general and safety requirements for light-emitting diode (LED) modules: - LED modules without integral control gear for operation under constant voltage, constant current or constant power; | |
| IEC 62031:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62031:2018 specifies general and safety requirements for light-emitting diode (LED) modules: - non-integrated LED modules (LEDni modules) and semi-integrated LED modules (LEDsi modules) for operation under constant voltage, constant... | |
| IEC 62032:2012(E) covers the application, specification, theory of operation, and factory and field testing of single-phase and three-phase oil-immersed, phase-shifting transformers (PSTs). This international standard is limited to matters particular... | |
| IEC 62034:2012 specifies the basic performance and safety requirements for individual products and components that are incorporated into automatic test systems for use with emergency lighting systems on supply voltages... | |
| IEC 62035:1999+A1:2003+A 2:2012 specifies the safety requirements for discharge lamps (excluding fluorescent lamps) for general lighting purposes. This International Standard is applicable to low-pressure sodium vapour lamps and to high-intensity... | |
| IEC 62035:2014 specifies the safety requirements for discharge lamps (excluding fluorescent lamps) for general lighting purposes. This second edition cancels and replaces the first edition published in 1999, AMD1:2003 and... | |
| IEC 62035:2014+A1:2016 specifies the safety requirements for discharge lamps (excluding fluorescent lamps) for general lighting purposes. This second edition cancels and replaces the first edition published in 1999, AMD1:2003 and... | |
| IEC 62037-1:2012 is applicable to the general requirements and measuring methods for intermodulation (IM) level measurement of passive RF and microwave components, which can be caused by the presence of... | |
| IEC 62037-1:2021 deals with the general requirements and measuring methods for intermodulation (IM) level measurement of passive RF and microwave components, which can be caused by the presence of two... | |
| IEC 62037-1:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62037-2:2012 defines a procedure to measure levels of passive intermodulation generated by a coaxial cable assembly. This test method is applicable to jumper cables, i.e. cable assemblies intended to... | |
| IEC 62037-2:2021 defines a procedure to measure levels of passive intermodulation generated by a coaxial cable assembly. This test method is applicable to jumper cables, i.e. cable assemblies intended to... | |
| IEC 62037-3:2012 is part of the IEC 62037 series, and defines the impact test on coaxial connectors to evaluate their robustness against weak connections and particles inside the connector as... | |
| IEC 62037-3:2021 defines the impact test on coaxial connectors to evaluate their robustness against weak connections and particles inside the connector, as independently as possible from the effects of cable... | |
| IEC 62037-3:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62037-4:2012 is part of the IEC 62037 series, and defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by coaxial cables. Two dynamic test methods... | |
| IEC 62037-5:2013 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by filters, typically used in wireless communication systems. The purpose is to define qualification and... | |
| IEC 62037-5:2021 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by filters, typically used in wireless communication systems. The purpose is to define qualification and... | |
| IEC 62037-5:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62037-6:2013 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by antennas, typically used in wireless communication systems. The purpose is to define qualification and... | |
| IEC 62037-6:2021 defines the test fixtures and procedures recommended for measuring levels of passive intermodulation generated by antennas, typically used in wireless communication systems. The purpose is to define qualification... | |
| IEC 62037-6:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62037-7:2022 defines test methods for reverse measurement of passive intermodulation (PIM) in systems of RF components deployed in the field. Field PIM measurements can be conducted on RF systems... | |
| IEC 62037-8:2022 defines a radiated passive intermodulation (PIM) test to determine PIM levels generated by a device or object when it is exposed to RF radiation. This test can be... | |
| IEC 62040-1:2008 applies to uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is used with IEC 60950-1, which is referred to in this... | |
| IEC 62040-1:2017 applies to movable, stationary, fixed or built-in UPS for use in low-voltage distribution systems and that are intended to be installed in an area accessible by an ordinary... | |
| IEC 62040-1:2017 EXV includes the provisions of the general rules dealt with in IEC 62477-1:2012. The Extended version is not an official IEC Standard. Only the current versions of the... | |
| IEC 62040-1:2017+AMD1:20 21 applies to movable, stationary, fixed or built-in UPS for use in low-voltage distribution systems and that are intended to be installed in an area accessible by an... | |
| IEC 62040-1:2017+AMD1:20 21+AMD2:2022 applies to movable, stationary, fixed or built-in UPS for use in low-voltage distribution systems and that are intended to be installed in an area accessible by an... | |
| IEC 62040-2:2016 is a type test product standard for electromagnetic compatibility (EMC) and applies to movable, stationary, fixed or built-in, pluggable and permanently connected UPS for use in low-voltage distribution... | |
| IEC 62040-2:2016 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62040-3:2011 applies to movable, stationary and fixed electronic uninterruptible power systems (UPS) that deliver single or three phase fixed frequency a.c. output voltage not exceeding 1 000 V a.c. | |
| IEC 62040-3:2021 establishes the performance and test requirements applied to movable, stationary and fixed electronic uninterruptible power systems (UPS) that - are supplied from AC voltage not exceeding 1 000... | |
| IEC 62040-4:2013 specifies the process and requirements to declare the environmental aspects concerning uninterruptible power systems (UPS), with the goal of promoting reduction of any adverse environmental impact during a... | |
| IEC 62040-5-3:2016 establishes the performance and test requirements applied to movable, stationary and fixed electronic DC uninterruptible power systems (DC UPS) that - are supplied from an AC voltage source... | |
| IEC 62041: 2017 is applicable to transformers, reactors and power supply units covered by the IEC 61558 series of standards. This document deals with the electromagnetic compatibility requirements for emission... | |
| IEC 62041:2010 applies to transformers, reactors, power supply units and combinations thereof covered by the IEC 61558 series of standards. This standard deals with the electromagnetic compatibility requirements for emission... | |
| IEC 62044-3:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62044-3:2023 specifies measuring methods for power loss and amplitude permeability of magnetic cores forming the closed magnetic circuits intended for use at high excitation levels in inductors, chokes, transformers... | |
| IEC 62046:2018 specifies requirements for the selection, positioning, configuration and commissioning of protective equipment to detect the momentary or continued presence of persons in order to protect those persons from... | |
| IEC 62047-10:2011 specifies micro-pillar compression test method to measure compressive properties of MEMS materials with high accuracy, repeatability, and moderate effort of specimen fabrication. The uniaxial compressive stress-strain relationship of... | |
| IEC 62047-11:2013 specifies the test method to measure the linear thermal expansion coefficients (CLTE) of thin free-standing solid (metallic, ceramic, polymeric, etc.) micro-electro-mechan ical system (MEMS) materials with length between... | |
| IEC 62047-12:2011 specifies a method for bending fatigue testing using resonant vibration of microscale mechanical structures of MEMS (micro-electromechan ical systems) and micromachines. This standard applies to vibrating structures ranging... | |
| IEC 62047-13:2012 specifies the adhesive testing method between micro-sized elements and a substrate using the columnar shape of the specimens. This international standard can be applied to adhesive strength measurement... | |
| IEC 62047-14:2012 describes definitions and procedures for measuring the forming limit of metallic film materials with a thickness range from 0,5 μm to 300 μm. The metallic film materials described... | |
| IEC 62047-15:2015 describes test method for bonding strength between poly dimethyl siloxane (PDMS) and glass. Silicone-based rubber, PDMS, is used for building of chip-based microfluidic devices fabricated using lithography and... | |
| IEC 62047-16:2015 specifies the test methods to measure the residual stresses of films with thickness in the range of 0,01 μ to 10 μ in MEMS structures fabricated by wafer... | |
| IEC 62047-17:2015 specifies the method for performing bulge tests on the free-standing film that is bulged within a window. The specimen is fabricated with micro/nano structural film materials, including metal,... | |
| IEC 62047-18:2013 specifies the method for bend testing of thin film materials with a length and width under 1 mm and a thickness in the range between 0,1 micrometre and... | |
| IEC 62047-19:2013 defines terms, definitions, essential ratings and characteristics, and measuring methods of electronic compasses. This standard applies to electronic compasses composed of magnetic sensors and acceleration sensors, or magnetic... | |
| IEC 62047-1:2016 defines terms for micro-electromechani cal devices including the process of production of such devices. This edition includes the following significant technical changes with respect to the previous edition:... | |
| IEC 62047-20:2014 specifies terms and definitions, ratings and characteristics, and measuring methods of gyroscopes. Gyroscopes are primarily used for consumer, general industries and aerospace applications. MEMS and semiconductor lasers are... | |
| IEC 62047-21:2014 specifies the determination of Poisson's ratio from the test results obtained by the application of uniaxial and biaxial loads to thin-film micro-electromechani cal systems (MEMS) materials with lengths... | |
| IEC 62047-22:2014 specifies a tensile test method to measure electromechanical properties of conductive thin micro-electromechani cal systems (MEMS) materials bonded on non-conductive flexible substrates. Conductive thin-film structures on flexible substrates... | |
| IEC 62047-25:2016 specifies the in-situ testing method to measure the bonding strength of micro bonding area which is fabricated by micromachining technologies used in silicon-based micro-electromechani cal system (MEMS). This... | |
| IEC 62047-26:2016 specifies descriptions of trench structure and needle structure in a micrometer scale. In addition, it provides examples of measurement for the geometry of both structures. For trench structures,... | |
| IEC 62047-27:2017(E) specifies a method for assessing the bond strength of glass frit bonded structures using micro-chevron-tests (MCT). It describes suitable sample geometry and provides guidance for the design of... | |
| IEC 62047-28:2017(E) specifies terms and definitions, and a performance testing method of vibration driven MEMS electret energy harvesting devices to determine the characteristic parameters for consumer, industry or any application. | |
| IEC 62047-29:2017(E) specifies a relaxation test method for measuring electromechanical properties of freestanding conductive thin films for micro-electromechani cal systems (MEMS) under controlled strain and room temperature. Freestanding thin films... | |
| IEC 62047-30:2017(E) specifies measuring methods of electro-mechanical conversion characteristics of piezoelectric thin film used for micro sensors and micro actuators, and its reporting schema to determine the characteristic parameters for... | |
| IEC 62047-31:2019 (E) specifies a four-point bending test method for measuring interfacial adhesion energy of the weakest interface in the layered micro-electromechani cal systems (MEMS) based on the concept of... | |
| IEC 62047-32:2019 specifies the test method and test condition for the nonlinear vibration of MEMS resonators. The statements made in this document apply to the development and manufacture for MEMS... | |
| IEC 62047-33:2019 (E) defines terms, definitions, essential ratings and characteristics, as well as test methods applicable to MEMS piezoresistive pressure-sensitive device. This document applies to piezoresistive pressure-sensitive devices for automotive,... | |
| IEC 62047-34:2019 (E) describes test conditions and test methods of electric character, static performances and thermal performances for MEMS pressure-sensitive devices. This document applies to test for both open and... | |
| IEC 62047-35:2019 specifies the test method of electrical characteristics under bending deformation for flexible electromechanical devices. These devices include passive micro components and/or active micro components on the flexible film... | |
| IEC 62047-36:2019 (E) specifies test methods for evaluating the durability of MEMS piezoelectric thin film materials under the environmental stress of temperature and humidity and under electrical stress, and test... | |
| IEC 62047-37:2020 specifies test methods for evaluating the durability of MEMS piezoelectric thin film materials under the environmental stress of temperature and humidity and under mechanical stress and strain, and... | |
| IEC 62047-38:2021(E) specifies a test method for measuring the adhesion strength of metal powder paste in the electrical interconnection between micro-electromechani cal systems (MEMS) and a circuit board. The typical... | |
| IEC 62047-40:2021(E) specifies the test conditions and methods of micro-electromechani cal inertial shock switch threshold. This document applies to normally open micro-electromechani cal inertial shock switch. | |
| IEC 62047-41:2021 specifies the terminology, essential ratings and characteristics, and measuring methods of RF (Radio Frequency) MEMS (Micro-Electro-Mecha nical Systems) circulators and isolators. | |
| IEC 62047-42:2022 specifies measuring methods of electro-mechanical conversion characteristics of piezoelectric thin film on microcantilever, which is typical structure of actual micro sensors and micro actuators. In order to obtain... | |
| IEC 62047-43:2024 specifies the test method of electrical characteristics after cyclic bending deformation for flexible electromechanical devices. These devices include passive micro components and active micro components on the flexible... | |
| IEC 62047-44:2024 describes terminology, definitions and test methods that are used to evaluate and determine the dynamic performance of MEMS (Micro-Electromechan ical Systems) resonant electric‑field‑sensi tive devices. It also specifies... | |
| IEC 62047-47:2024 specifies the requirements and testing method to measure the bending strength of microstructures which are fabricated by micromachining technology used in silicon-based micro-electromechani cal system (MEMS). This document... | |
| IEC 62047-48:2024 specifies the requirements and testing method to determine the solution concentration by optical absorption using MEMS fluidic device. | |
| IEC 62047-4:2008 describes the generic specifications for micro-electromechani cal systems (MEMS) made by semiconductors, which are the basis for specifications given in other parts of this series for various types... | |
| IEC 62047-5:2011 describes terminology, definition, symbols, test methods that can be used to evaluate and determine the essential ratings and characteristic parameters of RF MEMS switches. The statements made in... | |
| IEC 62047-6:2009 specifies the method for axial tensile-tensile force fatigue testing of thin film materials with a length and width under 1 mm and a thickness in the range between... | |
| IEC 62047-7:2011 describes terms, definition, symbols, configurations, and test methods that can be used to evaluate and determine the performance characteristics of BAW resonator, filter, and duplexer devices as radio... | |
| IEC 62047-8:2011 specifies the strip bending test method to measure tensile properties of thin films with high accuracy, repeatability, moderate effort of alignment and handling compared to the conventional tensile... | |
| IEC 62047-9:2011 describes bonding strength measurement method of wafer to wafer bonding, type of bonding process such as silicon to silicon fusion bonding, silicon to glass anodic bonding, etc., and... | |
| IEC 62052-11:2003+A1:201 6 Covers type tests for electricity metering equipment for indoor and outdoor application and to newly manufactured equipment designed to measure the electric energy on 50 Hz or... | |
| IEC 62052-11:2020 specifies requirements and associated tests, with their appropriate conditions for type testing of AC and DC electricity meters. This document details functional, mechanical, electrical and marking requirements, test... | |
| IEC 62052-21:2004 specifies general requirements for the type test of newly manufactured indoor tariff and load control equipment, like electronic ripple control receivers and time switches that are used to... | |
| IEC 62052-21:2004+A1:201 6 specifies general requirements for the type test of newly manufactured indoor tariff and load control equipment, like electronic ripple control receivers and time switches that are used... | |
| IEC 62052-31:2015 specifies product safety requirements for equipment for electrical energy measurement and control. It applies to newly manufactured metering equipment designed to measure and control electrical energy on 50... | |
| IEC 62052-31:2024 specifies general safety requirements and associated tests, with their appropriate conditions for type testing of directly connected, transformer-operated or transducer-operated AC and DC electricity meters and load control... | |
| IEC 62052-41:2022 applies only to newly manufactured multi-energy and/or multi-rate static meters and it applies to their type tests only. This document applies to electricity metering equipment designed to: • | |
| IEC 62053-11:2003 Applies only to newly manufactured electromechanical watt-hour meters of accuracy classes 0,5, 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or... | |
| IEC 62053-11:2003+A1:201 6 Applies only to newly manufactured electromechanical watt-hour meters of accuracy classes 0,5, 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz... | |
| IEC 62053-21:2003+A1:201 6 Applies only to newly manufactured static watt-hour meters of accuracy classes 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or... | |
| IEC 62053-21:2020 applies only to static watt-hour meters of accuracy classes 0,5, 1 and 2 for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz... | |
| IEC 62053-22:2003+A1:201 6 Applies only to newly manufactured static watt-hour meters of accuracy classes 0,2 S and 0,5 S, for the measurement of alternating current electrical active energy in 50... | |
| IEC 62053-22:2020 applies only to transformer operated static watt-hour meters of accuracy classes 0,1 S, 0,2 S and 0,5 S for the measurement of alternating current electrical active energy in... | |
| IEC 62053-23:2003+A1:201 6 Applies only to newly manufactured static var-hour meters of accuracy classes 2 and 3, for the measurement of alternating current electrical reactive energy in 50 Hz or... | |
| IEC 62053-23:2020 applies only to static var-hour meters of accuracy classes 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks... | |
| IEC 62053-24:2014 applies only to newly manufactured transformer operated static var-hour meters of accuracy classes 0,5 S, and 1 S as well as direct connected static var-hour meters of accuracy... | |
| IEC 62053-24:2014+A1:201 6 applies only to newly manufactured transformer operated static var-hour meters of accuracy classes 0,5 S, and 1 S as well as direct connected static var-hour meters of... | |
| IEC 62053-24:2020 applies only to static var-hour meters of accuracy classes 0,5S, 1S, 1, 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or... | |
| IEC 62053-41:2021 applies only to static watt-hour meters of accuracy classes 0,5 and 1 for the measurement of DC electrical energy in DC systems, and it applies to their type... | |
| IEC 62054-11:2004+A1:201 6(E) Specifies particular requirements for the type test of newly manufactured indoor electronic ripple control receivers for the reception and interpretation of pulses of a single audio frequency... | |
| IEC 62054-21:2004 Specifies particular requirements for the type test of newly manufactured indoor time switches with operation reserve that are used to control electrical loads, multi-tariff registers and maximum demand... | |
| IEC 62054-21:2004+A1:201 7 specifies particular requirements for the type test of newly manufactured indoor time switches with operation reserve that are used to control electrical loads, multi-tariff registers and maximum... | |
| IEC 62055-31:2005 applies to newly manufactured, static watt-hour payment meters of accuracy classes 1 and 2 for direct connection, for the measurement of alternating current electrical energy consumption of a... | |
| IEC 62055-31:2022 applies to newly manufactured, static watt-hour payment meters of accuracy classes 0,5, 1 and 2 for direct connection, for the measurement of alternating current electrical energy consumption of... | |
| IEC 62055-31:2022 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC... | |
| IEC 62055-41:2014 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62055-41:2014 specifies the application layer protocol of the STS for transferring units of credit and other management information from a point of sale (POS) system to an STS-compliant payment... | |
| IEC 62055-41:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62055-41:2018 specifies the application layer protocol of the standard transfer specification (STS) used for transferring units of credit and other management information from a point of sale (POS) system... | |
| IEC 62055-42:2022, specifies a token generation mechanism and token structure for smart prepayment functionality in markets where IEC 62055-41 compliant systems are not used, and where a different security mechanism... | |
| IEC 62055-52:2008(E) specifies a physical layer protocol of the STS for transferring units of credit and other management information between a client (typically a HHU) and a server (an STS-compliant... | |
| IEC 62056-1-0:2014 provides information on the smart metering use cases and on architectures supported by the IEC 62056 DLMS/COSEM series of standards specifying electricity meter data exchange. It describes the... | |
| IEC 62056-3-1:2013 describes three profiles for local bus data exchange with stations either energized or not. For non-energized stations, the bus supplies energy for data exchange. Three different profiles are... | |
| IEC 62056-3-1:2021 describes two sets of profiles: the first set of profiles allows a bidirectional communication between a client and a server. This set of profiles is made of three... | |
| IEC 62056-3-1:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62056-4-7:2015 specifies a connection-less and a connection oriented transport layer (TL) for DLMS/COSEM communication profiles used on IP networks. These TLs provide OSI-style services to the service user DLMS/COSEM... | |
| IEC 62056-42:2002 specifies the physical layer services and protocols within the Companion Specification for Energy Metering (COSEM) three-layer connection oriented profile for asynchronous data communication. In annex A, an example... | |
| IEC 62056-5-3:2016 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62056-5-3:2016 specifies the DLMS/COSEM application layer in terms of structure, services and protocols for COSEM clients and servers, and defines how to use the DLMS/COSEM application layer in various... | |
| IEC 62056-5-3:2017 specifies the DLMS/COSEM application layer in terms of structure, services and protocols for DLMS/COSEM clients and servers, and defines rules to specify the DLMS/COSEM communication profiles. It defines... | |
| IEC 62056-5-3:2023 specifies the DLMS®/COSEM application layer in terms of structure, services and protocols for DLMS®/COSEM clients and servers, and defines rules to specify the DLMS®/COSEM communication profiles. It defines... | |
| IEC 62056-6-1:2013 specifies the overall structure of the OBject Identification System (OBIS) and the mapping of all commonly used data items in metering equipment to their identification codes. OBIS provides... | |
| IEC 62056-6-1:2015 specifies the overall structure of the OBject Identification System (OBIS) and the mapping of all commonly used data items in metering equipment to their identification codes. OBIS provides... | |
| IEC 62056-6-1:2017 specifies the overall structure of the OBject Identification System (OBIS) and the mapping of all commonly used data items in metering equipment to their identification codes. This third... | |
| IEC 62056-6-1:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy... | |
| IEC 62056-6-1:2023 specifies the overall structure of the OBject Identification System (OBIS) and the mapping of all commonly used data items in metering equipment to their identification codes.OBIS provides a... | |
| IEC 62056-6-2:2013 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes... | |
| IEC 62056-6-2:2016 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes... | |
| IEC 62056-6-2:2017 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes... | |
| IEC 62056-6-2:2023 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes... | |
| IEC 62056-7-3:2017 specifies DLMS/COSEM wired and wireless M-Bus communication profiles for local and neighbourhood networks. It is restricted to aspects concerning the use of communication protocols in conjunction with the... | |
| IEC 62056-7-5:2016 specifies DLMS/COSEM communication profiles for transmitting metering data modelled by COSEM interface objects through a Local Data Transmission Interface (LDTI). The LDTI may be part of a meter... | |
| IEC 62056-7-6:2013 specifies the DLMS/COSEM 3-layer, connection-oriented HDLC based communication profile. | |
| IEC 62056-8-12:2023 describes the use of DLMS®/COSEM for Low-Power Wide Area Networks (LPWANs). It specifies how the COSEM data model and the DLMS®/COSEM application layer can be used over various... | |
| IEC 62056-8-3:2013 specifies the DLMS/COSEM PLC S-SFK communication profile for neighbourhood networks. It uses standards established by IEC TC 57 in the IEC 61334 series. | |
| IEC 62056-8-4:2018 specifies DLMS/COSEM communication profiles for narrow-band OFDM power line carrier PRIME neighbourhood networks using the modulation as specified in Recommendation ITU-T G.9904:2012. Three communication profiles are specified: • | |
| IEC 62056-8-5:2017 specifies the IEC 62056 DLMS/COSEM communication profile for metering purposes based on the Recommendations ITU-T G.9901: Narrowband orthogonal frequency division multiplexing power line communication transceivers - Power spectral... | |
| IEC 62056-8-6:2017 specifies the DLMS/COSEM communication profile for ISO/IEC 12139‑1. High speed PLC (HS-PLC) neighbourhood networks. It uses the standard ISO/IEC 12139-1 established by ISO/IEC JTC1 SC06. | |
| IEC 62056-8-8:2020 describes how the DLMS/COSEM Application layer and the COSEM object model, as specified in IEC 62056‑5‑3:2017, IEC 62056‑6‑1:2017 and IEC 62056‑6‑2:2017, can be used over the lower layers... | |
| IEC 62056-9-7:2013 specifies the DLMS/COSEM communication profile for TCP-UDP/IP networks. | |
| IEC 620565-3:2013 specifies the DLMS/COSEM application layer in terms of structure, services and protocols for COSEM clients and servers, and defines how to use the DLMS/COSEM application layer in various... | |
| IEC 62057-1:2023 applies to stationary meter test units (MTUs) permanently installed in laboratories, used for testing and calibration of electricity meters, in particular for their type test, acceptance test and... | |
| IEC 62057-3:2024 applies to an automatic meter testing system (AMTS) permanently installed in a controlled environment. It covers the functions, technical requirements and acceptance methods of an AMTS. It also... | |
| IEC 62058-11:2008 specifies the general acceptance inspection methods which apply to newly manufactured electricity meters produced and supplied in lots of 50 and above. This publication is of high relevance... | |
| IEC 62058-21:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated electromechanical meters for active energy (classes 0,5, 1 and 2) delivered in lots in... | |
| IEC 62058-31:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) delivered... | |
| IEC 62059-31-1:2008 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. In this standard, elevated, constant temperature and humidity is applied to achieve acceleration. | |
| IEC 62059-32-1:2011 specifies a method for testing the stability of metrological characteristics of electricity meters, by operating a test specimen at the upper limit of the specified operating range of... | |
| IEC 62061:2005+A1:2012 specifies requirements and makes recommendations for the design, integration and validation of safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines (see Notes 1 and 2). | |
| IEC 62061:2005+A1:2012+A 2:2015 specifies requirements and makes recommendations for the design, integration and validation of safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines (see Notes 1 and... | |
| Is a guide for assessing the reliability of all types of fibre-optic interconnecting devices and passive optical components. It applies to passive devices for connection, branching, switching, minimization of reflection,... | |
| is a radio access specification for mobile, portable and hand-held portable devices capable of receiving DVB-T/H services. It includes informative system aspects as well as specifications for minimum RF performance. | |
| is intended as a product standard allowing the EMC conformity assessment of products of categories C1, C2 and C3 as defined in this part of IEC 62040, before placing them... | |
| Offers a set of rules that are applied in the design and manufacture of electrical installations and equipment to be used on rolling stock so as to protect the persons... | |
| Part 1 of IEC 62013, but which are nevertheless important for the safety and working conditions of the user. It may also be applied to caplights for use in mines... | |
| provide a tool for predicting the failure rate of electricity metering equipment using the parts stress method. It also provides an overview of reliability analysis and prediction methods. is applicable... | |
| Provides a set of guidelines and general infrastructure capabilities required for the application of the EMS-API interface standards. Describes typical integration scenarios where these standards are to be applied and... | |
| Provides a uniform method for describing and characterizing the background in a spectrum from an HPGe detector. Provides both manufacturers and end users with a way to specify the low-background... | |
| Provides assistance, guidance and requirements for the design of protection, control and measuring systems in d.c. installations intended to provide a power supply to traction systems. Is an application guide... | |
| Provides measuring methods for power loss and amplitude permeability of magnetic cores forming the closed magnetic circuits intended for use at high excitation levels in inductors, chokes, transformers and similar... | |
| Provides rules for the preparation of parts lists. Applicable to parts lists used in the design and engineering process intended to be supplied with the documentation. | |
| Provides rules for the structuring of technical information and documentation, based on the use of a main document (leading document) for the keeping together of information for each object. | |
| provides the conformance testing rules and guidelines for equipment built to meet the mobile and portable DVB-T/H radio access interface specification (IEC 62002-1). The purpose of this standard is to... | |
| Provides the semantics definitions for the categories of information related to electronic circuit designs. Each category of design information is modelled as an EXPRESS schema | |
| Specifies a generalized interface for efficient exchange of data. Takes into account the latencies caused by a local area network providing efficient data exchange also over local area networks. This... | |
| Specifies a generalized interface for efficient exchange of messages. Takes into account the latencies caused by a Local Area Network (LAN) providing efficient data exchange also over Local Area Networks. | |
| Specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object oriented methods, in the form of interface classes to... | |
| Specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes to model... | |
| specifies a physical layer protocol of the standard transfer specification (STS) for transferring units of credit and other management information between a point-of-sale (POS) system and an STS-compliant electricity payment... | |
| Specifies a standard for use of very high-speed integrated circuit hardware description language (VHDL) to model synthesizable register-transfer level digital logic. A standard syntax and semantics for VHDL register-transfer level... | |
| Specifies a standard test piece, which is used to guarantee the propriety and accuracy of a tensile testing system for thin film materials with length and width under 1 mm... | |
| Specifies a test method for the non-electrical characteristics of the surface mounted device inductors to be used for electronic and telecommunication equipment. Defines methods for measuring mechanical performance only. To... | |
| Specifies an interface system between a single controller or multiple controllers, and control circuit devices or switching elements. The interface system uses two twisted shielded conductor pairs within one cable... | |
| Specifies an interface system between a single or multiple controlling device and control circuit devices or switching elements as defined in IEC 60947-5-2, connected by a shielded, twisted four-wire cable... | |
| Specifies an interface system between single or multiple controllers, and control circuit devices or switching elements. The interface system uses two twisted conductor pairs within one cable - one of... | |
| Specifies electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in the high frequency (over 100 kHz) range. | |
| Specifies particular requirements for the type test of newly manufactured indoor electronic ripple control receivers for the reception and interpretation of pulses of a single audio frequency superimposed on the... | |
| Specifies performance characteristics and calibration methods for digital data acquisition systems and relevant software to ensure that all measurement systems relying on DAQ devices meet a common standard. This standard... | |
| specifies requirements and makes recommendations for the design, integration and validation of safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines (see Notes 1 and 2). It is... | |
| Specifies requirements for d.c. circuit-breakers for use in fixed installations of traction systems. | |
| Specifies requirements for d.c. disconnectors, switch-disconnectors and earthing switches for use in indoor fixed installations of traction systems. | |
| Specifies requirements for d.c. disconnectors, switch-disconnectors and earthing switches for use in outdoor fixed installations of traction systems. | |
| Specifies requirements for the construction and testing of caplights for use in mines susceptible to firedamp (Group I - electrical apparatus for explosive gas atmospheres as defined in IEC 60079-0). | |
| specifies the application layer protocol of the STS for transferring units of credit and other management information from a point-of-sale (POS) system to an STS-compliant payment meter in a one-way... | |
| Specifies the COSEM application layer in terms of structure, services and protocols for COSEM clients and servers, and defines how to use the COSEM application layer in various communication profiles. | |
| Specifies the COSEM application layer in terms of structure, services and protocols, for COSEM clients and | |
| Specifies the data link layer for connection-oriented, HDLC-based, asynchronous communication profile. This consolidated version consists of the first edition (2002) and its amendment 1 (2006). Therefore, no need to order... | |
| Specifies the data link layer for connection-oriented, HDLC-based, asynchronous communication profile. This publication is of high relevance for Smart Grid. | |
| specifies the definitions and test methods, when used in harsh environment, of symmetrical pair and quad cables used in digital communication systems such as ISDN, local area networks and data... | |
| Specifies the format and rules for producing a machine readable form of the Common Information Model (CIM) as specified in the IEC 61970-301 standard. Describes a CIM vocabulary to support... | |
| Specifies the internal and external coordination dimensions and pitches for outdoor enclosures consisting of cases and cabinets. Is applicable for the development of detail specifications for cases and cabinets exposed... | |
| Specifies the method for tensile testing of thin film materials with length and width under 1 mm and thickness under 10 m, which are main structural materials for micro-electromechani cal... | |
| Specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards adopted by the IMO in resolution MSC.74(69), Annex 3, Universal Shipborne Automatic... | |
| Specifies the minimum performance requirements, technical characteristics and methods of testing and required test results, for shipborne voyage data recorder (VDR) installations as required by the International Convention for Safety... | |
| Specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for shipborne voyage data recorder (VDR) installations as required by Chapter V of the International... | |
| Specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for simplified shipborne voyage data recorders (S-VDRs) as required by IMO MSC.163(78). It takes into... | |
| Specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for simplified shipborne voyage data recorders (S-VDRs) as required by IMO MSC.163(78). Takes into account... | |
| Specifies the safety requirements for discharge lamps (excluding fluorescent lamps) for general lighting purposes. This International Standard is applicable to low-pressure sodium vapour lamps and to high-intensity discharge (HID) lamps,... | |
| Specifies the transport layers for COSEM communication profiles for use on IPv4 networks. These communication profiles contain a connection-less and a connection-oriented transport layer, providing OSI-style services to the service... | |
| Standard | |
| The contents of the corrigendum of March 2018 have been included in this copy. | |
| The IEC 61992 series specifies requirements for d.c. switchgear and controlgear and is intended to be used in fixed electrical installations with nominal voltage not exceeding 3 000 V d.c.,... | |
| The OBject Identification System (OBIS) defines the identification codes (ID-codes) for commonly used data items in electricity metering equipment. This part of IEC 62056 specifies the overall structure of the... | |
| The test procedure characterizes the level of unwanted signals caused by the presence of two or more transmitting signals in passive r.f. components. | |
| This international product family standard applies to independent transformers, reactors and power supply units covered by IEC 60989 and the IEC 61558 series of standards. It prescribes the electromagnetic compatibility... | |
| This International Standard applies to interfaces between low-voltage switchgear, controlgear, and controllers (e.g. programmable controllers, personal computers, etc.). This standard does not apply to higher level industrial communication networks that... | |
| This International Standard defines the test methods used to measure power consumption of information technology equipment (ITE) under various modes of operation for the purpose of energy management. ITE includes... | |
| This International Standard specifies general and safety requirements for light-emitting diode (LED) modules: - LED modules without integral control gear for operation under constant voltage, constant current or constant power; | |
| This International Standard specifies the basic performance and safety requirements for individual products and components that are incorporated into automatic test systems for use with emergency lighting systems on supply... | |
| This pack contains the following IEC 61970 International Standards that are needed to cover the Common Grid Model Exchange Specification (CGMES): IEC 61970-301:2020+AMD1: 2022 CSV IEC 61970-302:2018 IEC 61970-452:2021 IEC... | |
| This part of IEC 61982 is applicable to performance and life testing of electrical energy storage systems for general purpose, traffic compatible, light urban use electric road vehicles that are... | |
| This part of IEC 61982 specifies tests and requirements for capacity and endurance tests for secondary batteries used for vehicle propulsion applications. Its objective is to specify certain essential characteristics... | |
| This part of IEC 61988 defines drawings and required dimensions of plasma display (PDP) modules, PDP components, PDP sub-assemblies and ancillary components. This standard serves as a basis to establish... | |
| This part of IEC 62013 details those performance and other safety features of caplights, including those with a point of connection for another apparatus, not covered in IEC 62013-1, but... | |
| This part of IEC 62013 specifies requirements for the construction and testing of caplights, including caplights with a point of connection for another apparatus, for use in mines susceptible to... | |
| This part of IEC 62047 defines terms for micro-electromechani cal devices including the process of production of such devices. | |
| This standard specifies the values of the various parameters such as voltage, current, power and temperature to be used in the testing of battery cells, monoblocs and modules used for... |
| << Prev | Next >> |