ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| A method of determining the dynamic viscosity of glass by measuring the elongation a glass fibre under a defined uniaxial stress. In addition the viscosity-temperatur e relationship and the dependence... | |
| A method of determining the dynamic viscosity of glass on a rod-shaped test specimen, i.e. a beam, supported at its end is specified. The viscous deflection rate of the beam... | |
| Acoustics -- Statistical methods for determining and verifying stated noise emission values of machinery and equipment -- Part 3: Simple (transition) method for stated values for batches of machines | |
| Aerospace -- Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C -- Test methods | |
| Aerospace -- Spline drives -- Wrenching configuration -- Metric series | |
| Agricultural tractors -- Test procedures -- Part 12: Low temperature starting | |
| Animal feeding stuffs -- Determination of potassium and sodium contents -- Methods using flame-emission spectrometry | |
| Applicable to fabrics which, in use, are subjected to cold water without agitation. The specimen is cut from the sample and, after conditioning, is measured, soaked, dried under the described... | |
| Applicable to the evaluation of contamination on surfaces of facilities and equipment, containers of radioactive materials and sealed sources by low energy beta-emitters (<0,15 MeV) in terms of activity per... | |
| Applies to carbon content of nickel and ferronickel in the range 0.001 to 2.0 % (m/m), and of nickel alloys in the range 0.001 to 0.5 % (m/m). Specifies principle,... | |
| Applies to cobalt contents in the range 0,025 to 2,5 % (m/m). Specifies principle, reagents, apparatus, sampling and samples, procedure, expression on results, special cases and test report. | |
| Applies to metals and alloys, and metals and alloys with metallic and non-metallic non-organic coatings. The methods are intended for the determination of the amount and type of corrosion effect,... | |
| Applies to surfaces of equipment and facilities, containers of radioactive materials and sealed sources, does not apply to the skin and contamination of clothing. Gives a method of direct measurement... | |
| Applies to surfaces of equipment and facilities, containers of radioactive materials and sealed sources, does not apply to the skin and contamination of clothing. Gives direct and indirect methods of... | |
| Applies to the determination of 1 % (m/m) to 25 % (m/m) chromium content in nickel alloys which do not contain insoluble chromium carbides, and which have a vanadium content... | |
| Applies to the determination of low concentrations of bismuth active substances. The method is suitable for influents and effluents of sewage treatment plants and waste water. When investigating surface waters... | |
| Applies to the determination of sulfur content of nickel and ferronickel in the range 0,001 to 0,3 % (m/m), and of nickel alloys in the range 0,001 to 0,1 %... | |
| Applies to the determination of the given elements of high purity, refined, wrought and cast nickel within the ranges specifies in table 1. This method is applicable to the indipendent... | |
| Applies to the determination of the iron content of nickel alloys in the range 1 % (m/m) to 50% (m/m). The method is applicable only to alloys containing less than... | |
| Applies to the determination of the sulfur content of refined nickel in the range 0,0001 to 0,002 % (m/m). Specifies principle, reagents and materials, apparatus, sampling and samples, procedure, expression... | |
| Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of heads | |
| Automatic steam traps -- Determination of discharge capacity -- Test methods | |
| Cancels and replaces the first edition (1984). Defines terms that are used in connection both with maceral and microlithotype analyses carried out in white light and with the determination of... | |
| Cancels and replaces the first edition (1986). Specifies the design and operational requirements of rotating sprinklers and sprinkler nozzles for agricultural irrigation equipment and their test methods. Applies to sprinklers... | |
| Chemistry -- Layouts for standards -- Part 2: Methods of chemical analysis | |
| Cinematography -- A-chain frequency response for reproduction of 35 mm photographic sound -- Reproduction characteristics | |
| Cinematography -- Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film -- Positions and dimensions | |
| Cinematography -- Two-track photographic sound records on 16 mm motion-picture prints -- Positions and width dimensions | |
| Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments | |
| Countersunk flat head screws -- Part 2: Penetration depth of cross recesses | |
| Covers continuous pattern cards, banded pattern cards, Jacquard machines, comber boards and harness cord guides for the manufacture of fabrics, the face sides of which lie uppermost in the weaving... | |
| Covers procedures for designing, preparing and using bent-beam test specimens. These specimens may be used to test a variety of product forms (i. e. sheet, plate, flat extruded material, wire... | |
| Covers procedures for designing, preparing and using U-bend test specimens. These specimens may be used to test a variety of product forms (for example sheet, plate, flat extruded material, wire... | |
| Covers procedures for designing, preparing and using uniaxially loaded tension specimens. These specimens may be used to test a variety of product forms (for example sheet, plate, tubes, wire or... | |
| Covers procedures for designing, preparing, stressing, exposing and inspecting C-ring specimens. These versatile, economical specimens may be used to test a variety of product forms including parts joined by welding. | |
| Covers the following principal considerations for assessing products for machine dishwashing: a) the performance characteristics; b) the soiled articles required for assessing these characteristics; c) the washing processes. In dealing... | |
| Deals with the sampling and testing of paints, varnishes and related products. Gives a method for the determination of the resistance to abrasion of a dried coating, using abrasive paper... | |
| Deals with the sampling and testing of paints, varnishes and related products. Gives a method for the determination of the resistance to abrasion of a dried coating, using an abrasive... | |
| Defines multilink procedures where multiple parallel data links at the data link layer are used to provide a variable bandwidth data link between network layer entities. Does not specify the... | |
| Defines sampling conventions for particle size fractions for use in assessing possible health effects of airborne particles in the workplace and ambient environment. Defines conventions for the inhalable, thoracic and... | |
| Defines terms for quantities used as input to, and output from, computer programs for shipbuilding. Establishes terminology and definitions also for derived non-dimensional coefficients used in describing ships' hulls and... | |
| Defines terms relating to the procedures. Applies both to machines which are produced in very small quantities as well as to machines which are produced by mass production methods. | |
| Defines the conventional impact bodies used in order to reproduce the effect of actual impacts on vertical building elements as well as the general test procedures and the test procedures... | |
| Defines the quality of recorded signals, the track layout, and a track format (format B) to be used on 130 mm (5.25 in) flexible disk cartridges intended for data interchange... | |
| Delete Clause 5 and Subclauses 5.1 and 5.2. Includes further changes to Clause 3, to Subclause 4.2.2.2.4, and to the figures 4 and 5. | |
| Deletes and replaces the existing figure 1 by a new figure 1. | |
| Dental amalgamators | |
| Dental materials -- Determination of colour stability | |
| Dental rotary instruments -- Cutters -- Part 2: Carbide laboratory cutters | |
| Dental rotary instruments -- Laboratory abrasive instruments | |
| Describes a method for determining the speed and average gradient of black-and-white negative films used in aerial photography. Depending on the processing conditions, a single film product may have several... | |
| Describes a method for the quantitative colorimetric evaluation of small differences between paint films. The CIE 1976 colour difference formula recommended in 1976 by the CIE has proved to be... | |
| Describes a method of measuring and calibrating the photoelectric output factor of single-channel photographic-type audio-level test films in all gauges by means of a calibrating sound reproducer. The specifications apply... | |
| Describes appropriate containers, the sealing of the containers, and the labelling, disposal and storage of the samples. | |
| Describes common sampling method, expression of results and test report for two methods of density determination using a pyknometer (method A and B) as well as their apparatus and procedure... | |
| Describes the characteristics of 130 mm (5.25 in) flexible disk cartridges recorded at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides using modified frequency modulation recording. Defines the... | |
| Describes the colorimetric terms and fundamental requirements necessary for determining the colour co-ordinates of paint films. From among the various colour co-ordinates recommended by the CIE, the colour co-ordinates in... | |
| Describes the De Mattia method, Schildknecht method and crumple/flex method for the assessment of the resistance of coated fabrics to damage by repeated flexing. Cancels and replaces the first edition,... | |
| Describes the method for determining the colour co-ordinates of paint films. The method is only application to paint films that appear to be uniformly of one colour (monochromatic), when examined... | |
| Describes the principle, the reagents and materials, the apparatus, the selection and preparation of intermediate test portion, the test procedure, the expression of results, and the contents of the test... | |
| Describes the procedure and the precautions to be taken in drawing representative samples of ethylene in the liquid phase stored at -100 °C and in the gaseous phase, for the... | |
| Describes three patterns using round (circular) and square perforations in low carbon steel plate of 3 mm thickness and above. The sizes of holes range from 125 to 3.15 mm... | |
| Describes three patterns using round (circular) and square perforations. The sizes of holes range down to 2 mm for square holes and to 0.5 mm for round holes. Five ratios... | |
| Describes two methods of exposure. In method A, the material is exposed under glass to natural light. In method B, the material is exposed to direct artificial light. The test... | |
| Diesel engines -- Cradle-mounted in-line fuel injection pumps -- Mounting dimensions | |
| Displacement liquids of known density should be selected in which the material to be tested is insoluble, and which has good wetting properties and a low evaporation rate under vacuum. | |
| Earth-moving machinery -- Determination of turning dimensions of wheeled machines | |
| Electroplated coatings of tin-lead alloys -- Specification and test methods | |
| Enables the exchange of geometrical information between different systems of ship hull definition. The terminology used is in accordance with ISO 7461. | |
| Ergonomics of the thermal environment -- Instruments for measuring physical quantities | |
| Establishes a classification system. It includes an explanation of the meaning of each heading and clearly assigns each material to an appropriate group. | |
| Establishes a layout for standard methods of analysis and gives some recommendations for their presentation and wording. This layout involves the use of appropriate terminology, indicated in ISO 6955. Supplements... | |
| Establishes a layout for standard methods of analysis of solutions in the visible and near ultra-violet regions. Gives some recommendations for their presentation and wording. The layout is preceded by... | |
| Establishes a method of representing the geometry of ship hull lines in numerical form, to allow the exchange of geometrical data between different systems of ship hull definition. The data... | |
| Establishes a vocabulary and definitions relating to unit injectors for compression-ignition (diesel) engines. | |
| Establishes a vocabulary with terms and definitions relating to fuel injection pumps for compression-ignition engines. Alphabetical indexes in English, French, and Russian are also included. | |
| Establishes general requirements, thicknesses of lines, and the simplified representation of doors and windows. Describes the conventional representation, and gives arrow symbols. Annex A is for information only. | |
| Establishes the arrangement, requirements and direction of movement of the basic controls for travelling, slewing, lifting, hoisting and lowering operations. Refers to ISO 4306-1 and ISO 7752-1. | |
| Establishes the arrangement, requirements and direction of movement of the basic controls for travelling, traversing, slewing, cab driving, lifting, hoisting and lowering operations for these cranes as defined in ISO... | |
| Establishes the dimensions of couplings mounted on commercial vehicles, such as hydraulic pumps, etc. Applies to ancillary equipment of commercial vehicles that require a hydraulic or mechanical power system and... | |
| Establishes the dimensions of side openings for truck power take-offs. These specifications are applicable for all general installations of power take-offs on the transmission gearbox of trucks and tractors where... | |
| Establishes the dimensions of the installation space for a car radio and its electrical connections for front installation. A type of rear fixing is also recommended. Applies to the installation... | |
| Establishes the initial procedure for positioning of a passenger car relative to a three-dimensional reference system, as given in ISO 4130, for the purposes of static measurements on the vehicle. | |
| Establishes the mounting dimensions for interchangeability of starter motors mounted on internal combustion engines. Applies to starter motors, types 1 to 4, sizes "A" and "B". May be used for... | |
| Flow-out and blow-out pipettes are considered. They will only be expected to provide their specified performance during the original operation. The requirements deal with the basis of adjustment, dimensions, delivery... | |
| For the determination of the watertightness of a joint a method has still not been elaborated. Because of the fundamental importance of this property, a solution is proposed, by way... | |
| For the determination of the watertightness of a joint a method has still not been elaborated. Because of the fundamental importance of this property, solutions are proposed, by way of... | |
| Fresh fruits and vegetables -- Vocabulary | |
| Fruit and vegetable products -- Determination of titratable acidity | |
| Fruit and vegetable products -- Determination of water-insoluble solids | |
| Gas analysis -- Vocabulary | |
| General methods of test for pigments and extenders -- Part 3: Determination of matter soluble in water -- Hot extraction method | |
| General methods of test for pigments and extenders -- Part 8: Determination of matter soluble in water -- Cold extraction method | |
| General requirements concerning the field of application, principle, interfering elements, apparatus, sampling and test report are given in ISO 7627-1. | |
| General requirements concerning the field of application, principle, interfering elements, apparatus, sampling and test report are given in ISO 7627-1.Determination of element contents in high concentration by the atomic absorption... | |
| General requirements concerning the field of application, principle, interfering elements,aparatus, sampling and test report are given in ISO 7627-1. In low concentrations the determination of these elements is very critical. | |
| General requirements concerning the field of application, principle, interfering elements,aparatus, sampling and test report are given in ISO 7627-1. | |
| Gives a detailed description of the morphological and anatomical structure of paprika and specifies a method of examination consisting in clarifying a pinch of ground paprika on a microscope slide... | |
| Gives a list of certain pesticide chemicals with reasonably short and distinctive chemical names or trivial name already known, to which it is deemed unnecessary to assign recommended common names... | |
| Gives a procedure for the evaluation and comparison of water-testing filters intended for the enumeration of specific organisms and mixed microbial populations. The procedure provides general guidelines for comparative testing... | |
| Gives a series of bucket capacities as a basis for standardization of inland dredger details. This series applies to multi-bucket dredgers used for dredging rivers, canals, lakes, water storage basins,... | |
| Gives definitions for these clamps with or without electrical grounding, designed for a range of tube outside diameters from 4 to 32 mm selected from ISO 2964, and lays down... | |
| Gives general intructions and specifies the methods for the determination of density at 20 °C, for the determination of boiling range, for the determination of dry residue after evaporation on... | |
| Gives guidance on conditions for the storage and refrigerated transport of cucumbers (Cucumis sativus L.), intended either for direct consumption or for industrial processing. | |
| Identifies and summarizes the various factors that shall be considered and evaluated by the design or specifying engineer in establishing performance requirements. Provides a summary of design factors as well... | |
| Identifies the data relating to the geometry of ship hull lines required for the transfer of information between organisations. Methods of representing the geometry in numerical form and the data... | |
| Identifies the types of flaws of surface and material after testing of disc brake pads, and specifies the method of measuring these flaws and of setting out the results. Flaws... | |
| Includes minimum performance and compatibility requirements for these systems for air cargo unit load devices, used to service civil wide body freight aircraft. Is applicable to equipment, designed to deal... | |
| Includes the following amendments, table 1: For types 1a and 2a, change the M dimension (penultimate column) to 150 mm; table 2: In the last column, change the heading "Minimum... | |
| Instant tea in solid form -- Determination of moisture content (loss in mass at 103 degrees C) | |
| Instant tea in solid form -- Determination of total ash | |
| Is applicable to all operations with plutonium, uranium 233, uranium enriched in the 235 isotope, and other fissionable materials. Does not require separate additional instrumentation when the operating instrumentation of... | |
| Is one of a series dealing with general rules and principles for the jointing of building components. Establishes a classification system for joints in building based on the ability of... | |
| ISO 7265:2012 specifies methods for preparing a sample from one or more sintered parts to be analysed for free or total carbon content. Combined carbon is determined as the difference... | |
| ISO 7369:2004 defines current terms concerning metal hoses, metal hose assemblies and component parts. It applies to: stripwound metal hoses and hose assemblies; corrugated metal hoses and hose assemblies. | |
| ISO 7372:2005 lists standard data elements intended to facilitate open interchange of data in international trade. The standard data elements listed can be used with any method for data interchange... | |
| ISO 7376:2009 gives general requirements for laryngoscopes used for intubation, and specifies critical dimensions for the handle and lamp of hook-on type laryngoscopes. It also addresses the interchangeability of blades... | |
| ISO 7380-1:2011 specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability. | |
| ISO 7380-2:2011 specifies the characteristics of hexagon socket button head screws with collar with threads from M3 up to and including M16, with product grade A and with reduced loadability. | |
| ISO 7388-1:2007 specifies the dimensions of tool shanks with a 7/24 taper, of shank forms A, AD, AF, U, UD and UF (with two possible additions for each), for automatic... | |
| ISO 7388-2:2007 specifies the dimensions of tool shanks with a 7/24 taper of shank form J (with two possible additions for each) for automatic tool changers, used on machines having... | |
| ISO 7388-3:2007 specifies the dimensions of retention knobs for tool shanks with a 7/24 taper of shank forms A, AD, AF, UC, UD, UF, JD and JF, for automatic tool... | |
| ISO 7391-1:2006 establishes a system of designation for polycarbonate thermoplastic material, which may be used as the basis for specifications. The types of polycarbonate plastic are differentiated from each other... | |
| ISO 7391-2:2006 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polycarbonate moulding and extrusion materials. Requirements for handling... | |
| ISO 7396-1:2007 specifies requirements for design, installation, function, performance, documentation, testing and commissioning of pipeline systems for compressed medical gases, gases for driving surgical tools and vacuum in healthcare facilities... | |
| ISO 7396-2:2007 specifies requirements for the design, installation, function, performance, documentation, testing and commissioning of anaesthetic gas scavenging disposal systems, to ensure patient safety and to minimize exposure of the... | |
| ISO 7401:2011 specifies open-loop test methods for determining the transient response behaviour of road vehicles. It is applicable to passenger cars, as defined in ISO 3833, and to light trucks. | |
| ISO 7404-2:2009 specifies methods for preparing a polished particulate block from a sample of crushed coal for analysis by reflectance microscopy. These methods can also be applied to the preparation... | |
| ISO 7404-3:2009 specifies a method for determining the proportions of the maceral groups (and the minerals, if desired) in coals. ISO 7404-3:2009 is applicable only to determinations made on polished... | |
| ISO 7404-5:2009 specifies the methods for determining the reflectance of vitrinite of coals microcopically on the polished surfaces, immersed in oil. The methods are applicable to coals from single seams... | |
| ISO 7405:2008 specifies test methods for the evaluation of biological effects of medical devices used in dentistry. It includes testing of pharmacological agents that are an integral part of the... | |
| ISO 7438:2005 specifies a method for determining the ability of metallic materials to undergo plastic deformation in bending. ISO 7438:2005 applies to test pieces taken from metallic products as specified... | |
| ISO 7439:2010 specifies requirements and tests for single-use, copper-bearing contraceptive intrauterine devices (IUDs) and their insertion instruments. (Some aspects can be applicable to medicated intrauterine devices and IUDs not containing... | |
| ISO 7451:2007 specifies a method for estimating the volume of materials which a hoe-type or grab-type bucket of a hydraulic excavator or backhoe loader can normally contain. The volume assessments... | |
| ISO 7452:2013 specifies requirements for tolerances for hot-rolled steel plates made on a reversing mill with the following characteristics: nominal thickness: 3 mm ≤ t ≤ 400 mm; nominal width:... | |
| ISO 7456:2007 specifies the grades and quality, the dimensional characteristics, the dimensional and geometrical tolerances, and the surface finish of standardized guide rails and their fishplates. In addition, ISO 7456:2007... | |
| ISO 7458:2004 specifies two test methods for the determination of the internal pressure resistance of glass containers, Method A by application of uniform internal pressure for a predetermined period and... | |
| ISO 7459:2004 specifies test methods for determining the thermal shock resistance and thermal shock endurance of glass containers. It does not apply to the determination of properties of laboratory glassware. | |
| ISO 7476:2003 specifies a precise and accurate gravimetric method for determining the mass fraction of uranium in uranyl nitrate solutions of nuclear grade quality containing more than 100 g/kg of... | |
| ISO 7482-2:2005 prescribes guidelines for the classification of raw or cured, trimmed goat skins on the basis of visually apparent defects. | |
| ISO 748:2007 specifies methods for determining the velocity and cross‑sectional area of water flowing in open channels without ice cover, and for computing the discharge therefrom. ISO 748:2007 covers methods... | |
| ISO 7493:2006 specifies requirements, recommendations and test methods for the operator's stool in the dental office as well as requirements for the manufacturer's instructions for use and for marking and... | |
| ISO 7494-1:2011 specifies requirements and test methods for dental units, regardless of whether or not they are electrically powered. ISO 7494-1:2011 also specifies requirements for manufacturer's instructions, marking and packaging. | |
| ISO 7494-2:2003 specifies requirements and test methods for the materials, design and construction of the water and air supply within dental units in order to ensure that the compressed water... | |
| ISO 75-1:2013 gives a general test method for the determination of the temperature of deflection under load (flexural stress under three-point loading) of plastics. Different types of test specimen and... | |
| ISO 75-2:2013 specifies three methods, using different values of constant flexural stress, which can be used for the determination of the temperature of deflection under load of plastics (including filled... | |
| ISO 75-3:2004 specifies a method for the determination of the temperature of deflection under load of high-strength thermosetting laminates and compression-moulded long-fibre-reinforce d plastics in which the fibre length is... | |
| ISO 7500-1:2004 specifies the verification of tension/compression testing machines. The verification consists of a general inspection of the testing machine, including its accessories for the force application and a calibration... | |
| ISO 7500-2:2006 specifies the verification of testing machines used for uniaxial creep testing in tension in accordance with ISO 204. The verification consists of a general inspection of the testing... | |
| ISO 7507-1:2003 specifies a method for the calibration of substantially vertical cylindrical tanks by measuring the tank using a strapping tape. This method is known as the strapping method and... | |
| ISO 7507-2:2005 specifies a method for the calibration of tanks above eight metres in diameter with cylindrical courses that are substantially vertical. It provides a method for determining the volumetric... | |
| ISO 7507-3:2006 specifies a calibration procedure for application to tanks above 8 m in diameter with cylindrical courses that are substantially vertical. It provides a method for determining the volumetric... | |
| ISO 7507-4:2010 specifies a method for the calibration of vertical cylindrical tanks having diameters greater than 5 m by means of internal measurements using an electro-optical distance-ranging (EODR) instrument, and... | |
| ISO 752:2004 specifies the classifications, chemical compositions, markings and other requirements for primary zinc. It includes a table of related grades of zinc which are recognized in other International Standards. | |
| ISO 7539-10:2013 covers procedures for designing, preparing and using reversed U-bend (RUB) test specimens for investigating the susceptibility of the metal to stress corrosion cracking. The term "metal" as used... | |
| ISO 7539-11:2013 gives guidance on the key features that should be accounted for in designing and conducting tests to evaluate the resistance of a metal or its alloy to hydrogen... | |
| ISO 7539-1:2012 describes the general considerations that apply when designing and conducting tests to assess susceptibility of metals to stress corrosion. ISO 7539-1:2012 also gives some general guidance on the... | |
| ISO 7539-6:2011 covers procedures for designing, preparing and using precracked specimens for investigating susceptibility to stress corrosion. It gives recommendations for the design, preparation and use of precracked specimens for... | |
| ISO 7539-7:2005 covers procedures for conducting slow strain rate tests for investigating susceptibility of a metal to stress corrosion cracking, including hydrogen-induced failure. The term "metal" as used in this... | |
| ISO 7539-9:2003 covers procedures for designing, preparing and using pre-cracked specimens for investigating the susceptibility of metal to stress corrosion cracking by means of tests conducted under rising load or... | |
| ISO 7540:2006 defines the requirements for ground paprika. A method for the determination of the moisture content of ground paprika is given in Annex A. Recommendations relative to storage and... | |
| ISO 7573:2008 provides minimum requirements for parts lists to provide necessary information, e.g. for the production, procurement or maintenance of the parts. It covers manual as well as computer-generated parts... | |
| ISO 7578:2008 specifies general requirements and test methods for sheath-type glow-plugs. Detailed test condition(s) and/or requirement(s) are agreed between the glow-plug manufacturers and the engine manufacturer. It is applicable to... | |
| ISO 7579:2009 specifies two methods for determining the solubility of dyestuffs in organic solvents. They are applicable to dyestuffs that do not change chemically under the influence of the solvent... | |
| ISO 7583:2013 defines terms concerning anodized aluminium. | |
| ISO 7590:2009 specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts. Methods A1 and A2 (micrometer methods) can be... | |
| ISO 7597:2013 specifies requirements for forged steel lifting hooks with latch of grade 8 having eye or clevis and pin up to 63 t working load limit (WLL), mainly for... | |
| ISO 7599:2010 lays down a method for specifying decorative and protective anodic oxidation coatings on aluminium (including aluminium-based alloys). It defines the characteristic properties of anodic oxidation coatings, lists methods... | |
| ISO 7612:2009 specifies dimensional requirements for base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems for diesel (compression-ignitio n) engines. | |
| ISO 7617-2:2003 specifies requirements for coated fabrics for upholstered furniture, manufactured by applying to one side of a woven cloth a substantially continuous coating of a suitably plasticized polymer of... | |
| ISO 7619-1:2010 specifies a method for determining the indentation hardness (Shore hardness) of vulcanized or thermoplastic rubber by means of durometers using the A scale for rubbers in the normal-hardness... | |
| ISO 7619-2:2010 specifies a method for determining the indentation hardness of vulcanized or thermoplastic rubber by means of a pocket hardness meter calibrated in IRHD. The use of such meters... | |
| ISO 7622-1:2013 specifies a method for the determination of the elongation of steel cords constituting the carcass of conveyor belts, when subjected to a force corresponding to 10 % and... | |
| ISO 7626-1:2011 defines basic terms and specifies the calibration tests, environmental tests and physical measurements necessary to determine the suitability of impedance heads, force transducers and motion response transducers for... | |
| ISO 7628:2010 specifies the minimum requirements for mono wall and multilayer tubing used in air braking systems on road vehicles. The conformity of production is the responsibility of the tubing... | |
| ISO 762:2003 specifies a method for the determination of the mineral impurities content (impurities generally originating from the soil) of fruit and vegetable products. | |
| ISO 7634:2007 specifies the test procedures for testing the operational performance requirements of towed vehicles of Category O (full trailers, semi-trailers, and centre-axle trailers) as defined in Annex 7 of... | |
| ISO 7635:2006 specifies the method of testing the air or air over hydraulic braking systems of vehicles of categories M and N (excluding M1 and N1) as defined in Annex... | |
| ISO 7637-2:2011 specifies test methods and procedures to ensure the compatibility to conducted electrical transients of equipment installed on passenger cars and commercial vehicles fitted with 12 V or 24... | |
| ISO 7637-3:2007 establishes a bench top test for the evaluation of the immunity of devices under test (DUTs) to transient transmission by coupling via lines other than supply lines. The... | |
| ISO 7638-1:2003 gives the dimensions of, and specifies the contact allocation and tests and test requirements for, connectors for the electrical connection of the braking systems and running gear of... | |
| ISO 7638-2:2003 gives the dimensions of, and specifies the contact allocation and tests and test requirements for, connectors for the electrical connection of the braking systems and running gear of... | |
| ISO 763:2003 specifies a method for the determination of the hydrochloric-acid-in soluble ash yielded by fruit and vegetable products. The method serves for the determination of siliceous impurities, together with... | |
| ISO 764 specifies the minimum requirements and test methods for magnetic resistant watches. It is based on the simulation of an accidental exposure of a watch to a direct current... | |
| ISO 7641:2012 gives a simplified procedure for the calculation of the mechanical strength of steel drawbars, whether there are welds or not, for centre-axle trailers Categories O1 and O2 as... | |
| ISO 7663:2005 specifies: physical and chemical tests on raw rubbers; standardized materials, a standardized test formulation, and the equipment and processing methods for evaluating the vulcanization characteristics of all types... | |
| ISO 7668:2010 specifies methods for the measurement of specular reflectance and specular gloss of flat samples of anodized aluminium using geometries of 20° (Method A), 45° (Method B), 60° (Method... | |
| ISO 7671:2003 specifies the requirements for solid-wall polypropylene (PP) pipes and fittings for soil and waste discharge (low and high temperature) inside buildings, as well as the system itself. It... | |
| ISO 7675:2003 specifies the requirements for chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) inside buildings, as well as the system itself. | |
| ISO 7682:2003 specifies the requirements for solid-wall acrylonitrile-butadi ene-styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) inside buildings, as well as the system itself. | |
| ISO 7686:2005 specifies a method for the determination of the opacity of plastics pipes and fittings. | |
| ISO 7689:2008 specifies the characteristics and quality assurance requirements for MJ thread bolts made of alloy steel, of strength class 1 100 MPa, for aerospace construction. It is applicable whenever... | |
| ISO 76:2006 specifies methods of calculating the basic static load rating and the static equivalent load for rolling bearings within the size ranges shown in the relevant ISO standards, manufactured... | |
| ISO 7700-1:2008 specifies a method of checking the performance of moisture meters in service for measuring the moisture content of cereal grains. ISO 7700-1:2008 is not applicable for pattern approval,... | |
| ISO 7700-2:2011 specifies a method of checking the performance of moisture meters in service for measuring the moisture content of oilseeds. It is not applicable to either cases of pattern... | |
| ISO 770:2002 specifies certain characteristics of the raw and rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.), in order to facilitate assessment of its quality. | |
| ISO 7711-2:2011 specifies requirements for diamond discs used commonly in the dental laboratory for the cutting of dental materials, such as metals, ceramics, plastics or gypsum. In addition, ISO 7711-2:2011... | |
| ISO 7711-3:2004 specifies the designation, colour code and grit sizes for diamond rotary instruments which are used commonly in a dental surgery. It applies to all types of dental diamond... | |
| ISO 7714:2008 specifies general requirements and test methods for volumetric valves able to automatically deliver preset quantities of water. It is applicable to valves actuated by pipeline pressure and flow... | |
| ISO 7718-1:2009 specifies minimum requirements for dimensions and unobstructed space around main-deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be compatible with the... | |
| ISO 7718-2:2009 specifies minimum requirements for dimensions and unobstructed space around upper deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be compatible with... | |
| ISO 7719:2012 specifies the characteristics of prevailing torque type all-metal hexagon regular nuts with threads from M5 up to and including M36, in product grade A for threads up to... | |
| ISO 7720:2012 specifies the characteristics of prevailing torque type all-metal hexagon nuts, of style 2, with threads from M5 up to and including M36, in product grade A for threads... | |
| ISO 772:2011 gives terms, definitions and symbols used in standards in the field of hydrometry. | |
| ISO 7730:2005 presents methods for predicting the general thermal sensation and degree of discomfort (thermal dissatisfaction) of people exposed to moderate thermal environments. It enables the analytical determination and interpretation... | |
| ISO 7731:2003 specifies the physical principles of design, ergonomic requirements and the corresponding test methods for danger signals for public and work areas in the signal reception area and gives... | |
| ISO 7743:2011 specifies methods for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber using a standard test piece, a product or a part of a product. | |
| ISO 7745:2010 specifies the operational characteristics for the various categories of fire-resistant fluids defined by ISO 6743-4. ISO 7745:2010 details the factors to be considered when selecting a fluid from... | |
| ISO 7752-1:2010 establishes principles and requirements for the controls of cranes. It deals with the arrangement of those controls used in positioning loads and serves as a general basis for... | |
| ISO 7752-2:2011 establishes the arrangement, requirements and direction of movement of the basic controls for slewing, load hoisting and lowering, and boom luffing and telescoping, on mobile cranes as defined... | |
| ISO 7752-3:2010 specifies the particular requirements for the controls of tower cranes as defined in ISO 4306-3 and the arrangement of those basic controls used for positioning loads. It is... | |
| ISO 7755-10:2013 specifies the main dimensions of the cutting part for hardmetal burrs of cone shape, with a round (ball ) nose and designated by the Symbol L. | |
| ISO 7755-11:2013 specifies the main dimensions of the cutting part for hardmetal burrs of cone shape, with a pointed nose and designated by the symbol M. | |
| ISO 7755-12:2013 specifies the main dimensions of the cutting part for hardmetal burrs of inverted cone shape and designated by the symbol N. | |
| ISO 7755-1:2013 specifies the common characteristics of hardmetal burrs of various styles, in solid design or with brazed shank. | |
| ISO 7755-2:2013 specifies the main dimensions of the cutting part for hardmetal burrs of cylindrical shape and designated by the symbol A. Tolerances on the cutting diameter, direction of helix... | |
| ISO 7755-3:2013 specifies the main dimensions of the cutting part for hardmetal burrs of cylindrical shape, with a round- (ball-) nose and designated by the symbol C. Tolerances on the... | |
| ISO 7755-4:2013 specifies the main dimensions of the cutting part for hardmetal burrs of spherical shape and designated by the symbol D. | |
| ISO 7755-5:2013 specifies the main dimensions of the cutting part for hardmetal burrs of oval shape and designated by the symbol E. | |
| ISO 7755-6:2013 specifies the main dimensions of the cutting part for hardmetal burrs of arch shape, with a round (ball ) nose and designated by the symbol F. | |
| ISO 7755-7:2013 specifies the main dimensions of the cutting part for hardmetal burrs of arch shape, with a pointed nose and designated by the symbol G. | |
| ISO 7755-8:2013 specifies the main dimensions of the cutting part for hardmetal burrs of flame shape and designated by the symbol H. | |
| ISO 7755-9:2013 the main dimensions of the cutting part for hardmetal burrs of 60° cone and 90° cone shape and designated by the symbols J and K. | |
| ISO 7759:2010 specifies a method for the measurement of the reflectance characteristics of high-gloss anodized aluminium surfaces. The method described is also suitable for the measurement of the reflectance characteristics... | |
| ISO 7761:2004 specifies the dimensions of, and gives guidance on, the physical and performance characteristics of cartridges used for storing and viewing active-use 16 mm microfilm. It includes physical and... | |
| ISO 7764:2006 specifies a method for the preparation of predried test samples of natural iron ores, and iron ore concentrates and agglomerates, including sinter products, which are to be used... | |
| ISO 7766:2003 establishes a test method for the determination of hexacyanoferrate(II) (ferrocyanide) and hexacyanoferrate(III ) (ferricyanide), referred to hereafter as Fe(CN)6, in photographic processing effluents. Results are reported... | |
| ISO 7768:2009 specifies a method for assessing the retention of the original smooth appearance, after one or several cleansing treatments, of the fabrics tested. This method has been developed for... | |
| ISO 7769:2009 specifies a test method for evaluating the retention of pressed-in creases in fabrics after one or several cleansing treatments. A technique for inserting creases is not included as... | |
| ISO 776:2011 specifies a method for the determination of the acid-insoluble ash of pulp. It is applicable to all types of pulps. | |
| ISO 7770:2009 specifies a test method for evaluating the smoothness appearance of seams in fabrics, after one or several cleansing treatments. A seaming technique is not included, since the purpose... | |
| ISO 7779:2010 specifies procedures for measuring and reporting the noise emission of information technology and telecommunications equipment. The basic emission quantity is the A-weighted sound power level which may be... | |
| ISO 7781:2008 specifies methods for the determination of the soap and organic-acid content of raw styrene-butadiene rubber (SBR). Method A is the titration method using indicator reagent. Method B is... | |
| ISO 7789:2007 specifies the dimensions and provides other data relating to cavities in which two-, three- and four-port, screw-in cartridge valves are mounted in order to ensure interchangeability. ISO 7789:2007... | |
| ISO 7790:2013 specifies clamping dimensions of four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08, and 10, on mounting surfaces. The dimensions and sizes... | |
| ISO 7792-1:2012 establishes a system of designation for thermoplastic polyester (TP) material, which may be used as the basis for specifications. It covers polyester homopolymers for moulding and extrusion based... | |
| ISO 7792-2:2012 specifies the methods of preparation of test specimens and the standard test methods to be used in determining the properties of thermoplastic polyester moulding and extrusion materials. Requirements... | |
| ISO 7794:2011 specifies the dimensions, mechanical properties, mounting and fastening characteristics of screws used for mounting ski bindings on cross-country skis. The purpose of ISO 7794:2011 is to facilitate the... | |
| ISO 7795:2011 specifies test methods for determining the mounting and fastening characteristics of screws that are intended for fastening ski binding to cross-country skis. The requirements for ski-binding screws are... | |
| ISO 7823-1:2003 specifies requirements for non-modified flat poly(methyl methacrylate) (PMMA) cast sheets (plates) for general-purpose use. The sheets may be colourless or coloured, and may be transparent, translucent or opaque. | |
| ISO 7823-2:2003 specifies requirements for flat poly(methyl methacrylate) (PMMA) sheets extruded from colourless or coloured, transparent, translucent or opaque materials. The thickness range of the sheets covered by this part... | |
| ISO 7823-3:2007 specifies requirements for non-modified flat poly(methyl methacrylate) (PMMA) continuous cast sheets for general-purpose use. The sheets may be colourless or coloured, and may be transparent, translucent or opaque. | |
| ISO 7827:2010 specifies a method for the evaluation of the “ready” and “ultimate” biodegradability of organic compounds at a given range of concentrations by aerobic microorganisms. In this context, ISO... | |
| ISO 7839:2005 establishes a vocabulary of terms used in relation to knitting machines and accessories used in the knitting industry. It classifies these terms according to main characteristic and customary... | |
| ISO 7840:2013 specifies general requirements and physical tests for fire-resistant hoses for conveying petrol or petrol blended with ethanol and diesel fuel or diesel fuel blended with FAME, designed for... | |
| ISO 7862:2004 specifies a sled test procedure for the evaluation of restraint systems in road vehicles by the simulation of frontal collisions. Its main purposes are to improve test methods... | |
| ISO 7866:2012 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at time of manufacture of refillable seamless aluminium alloy gas cylinders of water capacities... | |
| ISO 7867-1:2005 establishes the size designation, the dimensional calculation and the markings of the metric series of tyres primarily intended for use on agricultural tractors and machines. Tyre and rim... | |
| ISO 7867-2:2005 establishes the service description, the tyre load ratings in basic and special applications, and reference inflation pressure increments for the metric series of tyres primarily intended for agricultural... | |
| ISO 787-7:2009 specifies a general method of test for determining the residue on sieve from a sample of pigment or extender dispersed in water. | |
| ISO 7870-1:2007 presents key elements and philosophy of the control chart approach, and identifies a wide variety of control charts (including those related to the Shewhart control chart and those... | |
| ISO 7870-2:2013 establishes a guide to the use and understanding of the Shewhart control chart approach to the methods for statistical control of a process. ISO 7870-2:2013 is limited to... | |
| ISO 7870-3:2012 gives guidance on the uses of acceptance control charts and establishes general procedures for determining sample sizes, action limits and decision criteria. This chart should be used only... | |
| ISO 7870-4:2011 provides statistical procedures for setting up cumulative sum (cusum) schemes for process and quality control using variables (measured) and attribute data. It describes general-purpose methods of decision-making using... | |
| ISO 7876-4:2004 establishes a vocabulary for high-pressure pipes and end-connections in fuel injection systems for diesel (compression-ignitio n) engines. | |
| ISO 7876-5:2004 establishes a vocabulary for common rail (CR) fuel injection systems for diesel (compression-ignitio n) engines and their components. The terms defined in this part of ISO 7876 are... | |
| ISO 7885:2010 gives dimensional and performance requirements for sterile injection needles for single use which are used in dental cartridge syringes complying with ISO 9997 for injection of dental local... | |
| ISO 7886-3:2005 specifies the properties and performance of sterile single-use hypodermic syringes with or without needle, made of plastic materials and stainless steel and intended for the aspiration of vaccines... | |
| ISO 7886-4:2006 specifies requirements for sterile single-use hypodermic syringes made of plastic materials with or without needle, and intended for the aspiration of fluids or for the injection of fluids... | |
| ISO 7887:2011 specifies four different methods, designated A to D, for the examination of colour. The previously most employed method for assessment of water colour in water treatment plants, limnological... | |
| ISO 7889|IDF 117:2003 specifies a method for the enumeration of characteristic microorganisms in yogurt by means of the colony-count technique at 37 degrees Celsius. The method is applicable to yogurts... | |
| Lays down the dimensions and position of holes for products, recommended for use; tabulates dimensions for thread diameters from 4 mm up to and including 52 mm; gives tolerances for... | |
| Lays down the dimensions of two sizes of fitting features for detacheable scalpel blades and the handles with which they are used. It secures a good fitting and interchangeability of... | |
| Lays down the principles on which the collection of dimensional accuracy data in building construction work shall be based and the format in which this data shall be presented for... | |
| Lays down the specification for products with metric dimensions and nominal shoulder diameters form 6,5 mm up to and including 25 mm; gives geometrical tolerances; includes specifications with reference to... | |
| Metallic materials -- Wire -- Simple torsion test | |
| Method for determining the dry creep factor of glass-reinforced plastics pipes. Applicable to pipes with an initial specific ring stiffness of not less than 630 N per square metres. Technically... | |
| Method for the determination of constituents of a test sample cut from glass-reinforced plastics. It includes the determination of resin, glass, aggregate and filler contents. Technically identical to EN 637:1994. | |
| Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Iodimetric titration method after induction furnace combustion | |
| Packaging -- Pictorial marking for handling of goods | |
| Page 10, clause A.2 MLP reset initiated by a single station: replace the existing diagram by that given in this Corrigendum. | |
| Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Reciprocating test panel method | |
| Paints and varnishes -- Determination of water-vapour transmission properties -- Cup method | |
| Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 5: External electro-optical distance-ranging method | |
| Petroleum products -- Determination of acid number -- Semi-micro colour-indicator titration method | |
| Petroleum products and lubricants -- Inhibited mineral turbine oils -- Determination of oxidation stability | |
| Photography -- Illuminants for sensitometry -- Specifications for daylight, incandescent tungsten and printer | |
| Photography -- Processing waste -- Determination of hydroquinone | |
| Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness | |
| Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | |
| Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure | |
| Plastics-coated fabrics for upholstery -- Part 1: Specification for PVC-coated knitted fabrics | |
| Positive control material | |
| Potatoes -- Guidelines for storage in artificially ventilated stores | |
| Procedure for comparing the colour of a coloured pigment with that of an agreed sample. The procedures described in this document are acceptable but the method using an automatic muller... | |
| Procedure given is applicable to raw and potable water. The range covers a nitrat nitrogen concentration up to 0,2 mg/l using the maximum test portion of 25 ml. Using cells... | |
| Provides a general description of security services and related mechanisms, which can be ensured by the Reference Model, and of the positions within the Reference Model where the services and... | |
| Provides a method for determining the bond strength of metal cords to their surrounding coating, either in the initial state or after thermal treatment. Replaces the first edition. | |
| Provides guidelines for determining the labelled value by the labeller and specifies statistical sampling procedures for checking compliance of noise emitted of a lot of machines with its labelled value. | |
| Provides quidelines for determining the labelled values of the noise emitted by individually-labelle d machines, that is in the situation in which each machine has its on value of its... | |
| Raw goat skins -- Part 1: Descriptions of defects | |
| Raw goat skins -- Part 2: Guidelines for grading on the basis of mass and size | |
| Relates to deviations from nominal thicknesses, widths and lengths due to inaccuracies in sawing. Is applicable to unplaned square-edged and unedged sawn timber having thicknesses or widths in the range... | |
| Replacement of "design working pressure" by "maximum working pressure" throughout text | |
| Replaces nominal size and mean pitch diameter in table 14. | |
| Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses | |
| Reviewed ISO Recommendation R 737. Covers unplaned square-edged und unedged sawn timber and defines how to measure thickness, width, length and volume. Terms and definitions are given in ISO 1032. | |
| Road vehicles -- Coiled tube assemblies for air brake connection between towing and towed vehicles -- Part 2: Performance requirements | |
| Road vehicles -- Electrical/electroni c switching devices -- Part 1: Relays and flashers | |
| Road vehicles -- Electrical/electroni c switching devices -- Part 2: Electronic devices | |
| Road vehicles -- Electrical/electroni c switching devices -- Part 3: Microrelays | |
| Road vehicles -- Spin-on fuel filters for diesel engines -- Mounting and connecting dimensions | |
| Rubber, raw natural and raw synthetic -- General guidance on storage | |
| Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods | |
| Rules a given characterizing glass as a liquid (or liquid-analogue deformable) material. Three ranges of viscosity can be distinguished: melting, working and annealing range. General requirements for measurement and calibration,... | |
| Shipbuilding and marine structures -- Deck machinery -- Towing winches for deep sea use | |
| Ships and marine technology -- Air-conditioning and ventilation of accommodation spaces -- Design conditions and basis of calculations | |
| Silicon content can be determined in the range of 0,2 % (m/m) to 1 % (m/m). The principle is dissolution of a test portion in acid, aspiration of the test... | |
| Silicon content can be determined in the range of 0,2 % (m/m) to 1 % (m/m). The principle is dissolution of a test portion in acid, filtration and aspiration of... | |
| Sodium carbonate for industrial use -- Preparation and storage of test samples | |
| Specification of the dimensional and other requirements, that are considered important to ensure the interchangeability of these instruments, for the nine most commonly used steel cutters. Other characteristics of cutters,... | |
| Specification of three basic test methods, which are essential in deciding the uniformity of an adhesive: Viscosity (dynamic and Brookfield viscosity), conventional dry matter content and ash content. | |
| Specifies a laboratory mechanical method of test for the determination of the relationship between tangential loading and relative displacement for certain types of vertical joints between large reinforced concrete panels... | |
| Specifies a method for comparing the resistance to bleeding with that of an agreed sample. The method has been established because it is essentially a practical test and as such... | |
| Specifies a method for determination of the resistance of defined parts of cross-country skis to breaking when quasistatically loaded. The test is applicable to all sizes of cross-country skis for... | |
| Specifies a method for determining the abrasion of a hose lining when a certain amount of specified grit is passed through the hose. The method is applicable to rubber and... | |
| Specifies a method for estimating the water distribution in relation to a grading scale which is enclosed to the standard. The water dispersion value of butter is used for grading... | |
| Specifies a method for the determination of compressive creep of rigid cellular plastics under specified conditions of load, temperature and time. Test specimes in form or rectangular parallelepipeds are placed... | |
| Specifies a method for the determination of compressive creep of rigid cellular plastics under specified conditions of load, temperature, relative humidity and time. Test specimes in form or rectangular parallelepipeds... | |
| Specifies a method for the determination, by a spectrometric method, of the total capsaicinoid content of whole or powdered chillies and their oleoresins. This method of analysis requires discoloration by... | |
| Specifies a method for the determination, by high-performance liquid chromatography, of the total capsaicinoid content of whole or powdered chillies (usually Capsicum frutescens L.) and their extracts (oleoresins). This content... | |
| Specifies a method for the measurement of all types of water. The quantity can be used to monitor the quality of surface waters, process waters in water supply and treatment... | |
| Specifies a method of determining the turning and clearance diameters of wheeled agricultural tractors. Applies to wheeled agricultural tractors having at least two axles fitted with pneumatic tyres. | |
| Specifies a method of test for determining the matter volatile at a temperature of 105 °C in a sample. The procedure is only applicable to materials that are stable at... | |
| Specifies a methode for the determination of the fatigue indexes, i.e. the resistance of the skis to changes of bottom camber height or irreversible damage, after a bending test with... | |
| Specifies a procedure for approximating the volume of typical materials contained in the bucket of front end loaders and excavators with front loading buckets. The volume ratings are based on... | |
| Specifies a procedure for water, readily applicable to field testing; it is based on measurement of the colour intensity by visual comparison of the colour with a scale of standards... | |
| Specifies a procedure for water. It is applicable for the measurement of concentrations, in terms of chlorine, from 0,01 to 0,21 mmol/l. The interfering substances are given. In annex B... | |
| Specifies a procedure for water. Sea water and waters containing bromides and iodides comprise a group for which special procedures are required. The procedure is applicable to concentrations, in terms... | |
| Specifies a test method for verifying the compliance of a passenger car (as defined in ISO 3833) with the requirements of EEC Directives 77/649 and 88/366 for the driver's 180° | |
| Specifies a test method to measure the drawbar pull performance of all self-propelled earth-moving machinery (except excavators) and their combination with mounted or trailed equipment, with or without payload. Covers... | |
| Specifies a titrimetric test method for the determination of the basicity of soluted material. The principle of the procedure consists in solution of a test portion in water, filtration of... | |
| Specifies dimensional and other relevant requirements for the 14 most commonly used shapes of dental diamond instruments, including a quality control for these instruments. Replaces ISO 7711:1984. | |
| Specifies dimensions for the following types of gaskets: non-metallic flat; spiral wound; metallic ring-joint; non-metallic envelope; corrugated, flat or grooved metallic and filled metallic. Annexes A and B are for... | |
| Specifies graphical symbols for diagnostic testers: marking of controls, indicators and tell-tales; use for indications on screens, and similar variable indicating systems; marking of connections and other input and output... | |
| Specifies methods and instruments for measuring the characteristics for readers specified in ISO 6198. Applies to magnification, resolution, distortion, screen luminance, screen contrast and film gate temperatures. Annex A deals... | |
| Specifies methods for the determination of the energy, that causes plastics films and sheet less than 1 mm in thickness to fail under specified conditions of impact of a free... | |
| Specifies methods for the determination of up to 4 % (m/m) of cobalt, chromium, copper, iron, manganese and aluminium, up to 2 % (m/m) of silicon and from 0,05 %... | |
| Specifies methods of test for the determination ot the mechanical properties of horizontal joints between load-bearing walls and concrete floors subjected to vertical loading and moments transmitted by the floors. | |
| Specifies minimum requirements for type 3, class A, air cargo unit load device chassis in accordance with the terminology defined in ISO 7715. Outlines the requirements for a transport vehicle,... | |
| Specifies only ratios. The methods to perform the proof and burst tests are specified in ISO 1402. This second edition cancels and replaces the first edition (1983). | |
| Specifies performance tests for moulded rubber boots used as end closures on drum type brake cylinders. These boots prevent the entrance of dirt and moisture which could cause corrosion and... | |
| Specifies performance tests of brake cups and seals for braking systems. Requirements relating to chemical composition, tensile strength and elongation of the rubber compound are not included. Applies to moulded... | |
| Specifies procedures for measuring mechanical mobility and other frequency-response functions of structures excited by means of a translational impulsive force generated by an exciter which is not attached to the... | |
| Specifies procedures for measuring the quantity and other frequency-response functions of structures, such as buildings, machines and vehicles. Is applicable to measurements of mobility, accelerance, or dynamic compliance, either as... | |
| Specifies procedures for the statistical control of processes by using control charts based on calculating the arithmetic average of a sample and using warning limits and action limits. It is... | |
| Specifies requirements (cleanliness, limits for acidity and alkalinity, limits for extractable metals, lubricant, tolerance on graduated capacity, graduated scale, barrel, piston/plunger assembly, nozzle, performance, packaging, labelling) for sterile single-use hypodermic... | |
| Specifies requirements and characteristics of lightly powered winches provided with electric, hydraulic or pneumatic drive, and unpowered winches. Does not include requirements for the prime mover used to operate the... | |
| Specifies requirements and test methods for dental absorbent points used in endodontic procedures. | |
| Specifies requirements and test methods for dried peaches from fruits of the species Prunus persica. Cancels and replaces the first edition, which has been technically revised. | |
| Specifies requirements and test methods for dried pears from fruits of the species Pyrus communis. Cancels and replaces the first edition, which has been technically revised. | |
| Specifies requirements for file structure and labelling of flexible disk cartridges for information interchange between users of different information processing systems, i.e. recorded labels to identify files, file sections and... | |
| Specifies requirements for polyurethane-coated fabrics for upholstered furniture, where a substantially continuous coating is applied to one side of the fabric. Two annexes for the selection of the specimen and... | |
| Specifies requirements for sterile single-use hypodermic syringes of nominal capacity 5 ml and above, made of plastics materials and intended for use with power-driven syringe pumps. Does not apply to... | |
| Specifies requirements for whole berries of Juniperus communis Linnaeus. Further it includes sampling, methods of test, packing and marking. An annex A lists areas of production. Recommendations relating to storage... | |
| Specifies rules for symbols and markings in general arrangement drawings and assembly drawings. In general the applications shown concern plans. Views and sections can be shown similarly. Outlines, dimensions and... | |
| Specifies specimens, apparatus and procedure of corrosion tests. Applies to metals and alloys with and without permanent corrosion protection or temporary corrosion protection. The requirements specified in ISO 7384 are... | |
| Specifies terms and definitions in English, French and Russian. Contains the alphabetical indexes in English, French and Russian. Annex A is for information only. | |
| Specifies test methods for type approval testing. Describes the test bench, the parameters to be measured, and the test procedure. This second edition cancels and replaces the first edition (1983). | |
| Specifies test procedures for determining the lifting capacity of rear-mounted three-point linkage systems: a) the maximum vertical force which can be exerted by the hydraulic lift at the lower hitch... | |
| Specifies test procedures for normal and emergency steering modes of an agricultural wheeled tractor having at least two axles fitted with pneumatic tyres. Does not apply to track-type tractors. | |
| Specifies the characteristics common to all deck machinery of any type not detailed in the relevant specific International Standards. If in any items this Standard contradicts the specific International Standard,... | |
| Specifies the characteristics of micrometers with a measuring capacity up to 600 mm and a minimum scale value not greater then 2 micrometer together with riser blocks up to 600... | |
| Specifies the characteristics of products with metric dimensions and thread sizes from M 1,2 up to and including M 12 and product grade A; includes specifications with reference to International... | |
| Specifies the characteristics of products with metric dimensions and thread sizes from M 1,6 up to and including M 12 and product grade A; includes specifications with reference to International... | |
| Specifies the characteristics of products with thread sizes from M 1,6 up to and including M 20; it recommends a gauging method for the dimensions laid down in the respective... | |
| Specifies the conditions for measuring the geometrical characteristics of alpine and cross-country skis (sampling and conditioning, tolerances) and the details of the test report. | |
| Specifies the criteria which shall be satisfied by the qualities of steel plate and wide flats for which trough-tickness reduction of area properties are specified in the direction of thickness... | |
| Specifies the dimensional and other requirements for the three most commonly used cutters with nominal sizes 010, 015, 023. A cylindrical cutter for side cutting only is shown in figure... | |
| Specifies the dimensions and characteristics of seamless and welded austenitic steel tubes with dimensions corresponding to the medium series of ISO 65. Tabulates nominal sizes from DN 6 up to... | |
| Specifies the dimensions and other data relating to cavities in which valves are mounted in order to ensure interchangeability. Applies to cavities for valves which are generally applicable to industrial... | |
| Specifies the dimensions and performance requirements for dental explorers. Replaces the first edition. | |
| Specifies the dimensions necessary for interchangeability. Two filter element types, A and B, are specified. Types A and B are not interchangeable. This part of ISO 7750 may be used... | |
| Specifies the electrical characteristics with which a.c. flasher units are required to comply when submitted for type-testing. Applies to flashers intended for use with 6 V or 12 V systems. | |
| Specifies the electrical characteristics with which d.c. flasher units are required to comply when submitted for type-testing. Applies to flashers intended for use with 6 V or 12 V systems. | |
| Specifies the essential dimensional characteristics necessary for the interchangeability of filter elements. Most filter elements are specified with two alternative internal diameters; however, the values listed in the "preferred" column... | |
| Specifies the essential dimensional characteristics necessary for the interchangeability of filter elements. Two element types, C and D, are specified, which differ in their design and which require different installation... | |
| Specifies the essential dimensions of connections for rear-mounted power take-offs (type A, B and E). These specifications are applicable to all installations of power take-offs at the back of transmission... | |
| Specifies the essential dimensions of hexagon nuts with a flat seat captive washer for 18 mm, 20 mm and 22 mm studs. | |
| Specifies the following requirements for needles of nominal outside diameters 0,3 mm and 1,2 mm: nomenclature for components, cleanliness, limits for acidity and alkalinity, size designation, colour coding, needle hub,... | |
| Specifies the geometrical tests for these woodworking planing machines, and gives the corresponding permissible deviation which apply to machines for general purpose use and normal accuracy. Gives also the terminology... | |
| Specifies the geometrical tests for these woodworking planing machines, and gives the corresponding permissible deviations which apply to machines for general purpose use and normal accuracy. Gives also the terminologie... | |
| Specifies the geometrical tests for these woodworking planing machines, and gives the corresponding permissible deviations which apply to machines for general purpose use and normal accuracy. Gives also the terminology... | |
| Specifies the main dimensions of steering ball joints. The ball joint is considered as being a single piece with its socket, so the ball-socket assembly is specified. A figure illustrates... | |
| Specifies the main principles for the use, inspection, in-service testing and maintenance of chains operating over chain wheels. The principal applications include manual and power driven hoists. Lifting chains may... | |
| Specifies the method for determining the ability of sheet and strip to undergo plastic deformation in reverse bending. Can be applied to aluminium and its alloys only after previous agreement. | |
| Specifies the method for determining the ability of wire of diameter or thickness 0,1 to 10 mm inclusive to undergo plastic deformation during wrapping. The test consists of winding a... | |
| Specifies the method for determining the ability of wire of diameter or thickness 0,3 to 10 mm inclusive to undergo plastic deformation during reverse bending. The range of diameters of... | |
| Specifies the minimum conditions to ensure braking compatibility and in particular response time for coiled pipe assemblies. Applies to coiled pipe assemblies for vehicle combinations equipped with pneumatic braking systems. | |
| Specifies the mounting and connecting dimensions for heads for two-stage fuel filters used for diesel engines on road vehicles. The figure shows the details specified and the table includes the... | |
| Specifies the mounting dimensions necessary for interchangeability of hinge-mounted alternators. May be used for other engine applications where no specific standards exist. | |
| Specifies the nominal dimensions and tolerances of flywheel housings, in particular those which affect interchangeability with mating parts. Flywheel housings of size codes 1 to 4 are recommended for commercial... | |
| Specifies the nominal dimensions and tolerances which affect the interchangeability between clutch housings for spring-loaded clutches and mating parts. All other dimensions and tolerances are left to the discretion of... | |
| Specifies the nominal dimensions and tolerances which affect the interchangeability between gearbox flanges and mating parts used on commercial vehicles and buses. The flanges type A are not interchangeable with... | |
| Specifies the nominal dimensions and tolerances which affect the interchangeability between gearbox flanges and mating parts used on commercial vehicles and buses. The flanges type S are not interchangeable with... | |
| Specifies the performance test methods and requirements for elastomeric O-rings used in brake wheel cylinders. Applies to solid O-ring seals mounted stationary in the cylinder bore or on the movable... | |
| Specifies the performance test methods and requirements for seals used in disc brake cylinders. Applies to solid section type seals (square, rectangular,'O'-ring ) mounted stationary in the cylinder bore or... | |
| Specifies the provisions applicable to registration plates. Compliance with national regulations for dimensions, shape, letters, and numerals shall be checked on a completely finished plate by the competent authorities. Includes... | |
| Specifies the reference method. It consists in boiling of a test portion with dilute hydrochloric acid solution. | |
| Specifies the requirements and corresponding test methods for artificial ultramarine pigments, suitable for use in paints. Replaces ISO Recommendation R 788-1968. | |
| Specifies the requirements for whole aniseed, describes sampling, methods of test, and packing and marking. Annes A includes a list indicating the areas of production while recommendations relating to storage... | |
| Specifies the requirements, methods of rating and testing of single, two, three and four branch (or leg) chain slings assembled by methods other than welding. Does not apply to chain... | |
| Specifies the shapes and lays down the dimensions of the heads of plough bolts (excluding thread dimensions) used for mounting of cutting edges, end bits, bucket teeth etc. of earth-moving... | |
| Specifies the type of sling, the working load limit, and the manufacture of slings and sling assemblies. The multilegged slings are constructed with legs of equal nominal length. Slings of... | |
| Specifies the types of hydraulic lubrication nipples and lays down their dimensions. To facilitate the lubrication of machine parts, it is recommended that the number of types and dimensions of... | |
| Specifies two equivalent methodes. They consist in dissolving the wanted substance in a mixture of hydrochloric and nitric acids or in a mixture of sulfuric and nitric acids. | |
| Specifies two test methods for steam traps. The object of these tests is to determine the amount of live steam, if any, that is lost through the steam trap. There... | |
| Specifies types and main dimensions of the couplings intended for a bow-to-stern connection of vessels in push tows, navigating in waters with a wave height of not more than 2... | |
| Specifies types, design and basic dimensions as well as technical requirements. Has been prepared in accordance with the environmental protection aspects of the Final Act of the Conference on Security... | |
| Specifies types, dimensions, locations, indication method and colour requirements for the draught scales. Type 1 determines the draught by signs and digits, type 2 only by digits. The lower edge... | |
| Spectrometric method for the determination of anionic surfactants by measurement of the methylene blue index (MBAS) in aqueous media. Suitable for drinking water, surface water and waste water. Does apply... | |
| Subsequent parts of ISO 7627 specify methods for determination of the content of a number of elements (see the table). The method is applicable to cabides of chromium, niobium, tantalum,... | |
| TC 121 Anaesthetic and respiratory equipment // SC 6 | |
| TC 164 Mechanical testing of metals // SC 1 | |
| TC 18 Zinc and zinc alloys // SC 3 | |
| TC 22 Road vehicles // SC 15 | |
| TC 22 Road vehicles // SC 7 | |
| TC 34 Food products // SC 8 | |
| TC 8 Ships and marine technology // SC 3 | |
| TC 96 Cranes // SC 7 | |
| Technical drawings -- Construction drawings -- General rules for execution of production drawings for prefabricated structural components | |
| Terminology relating to alarm systems | |
| Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods | |
| The 132 codes for dimensions including angles established are to be used for the exchange of vehicle data and electronic processing. Applies to commercial road vehicles as defined in ISO... | |
| The complete procedure consists of four parts: determination of the conditions for the preparation of the dispersion of the coloured pigment, and determination of the ratio of the coloured pigment... | |
| The described system and fixture ensure accurate flow-testing of the entire range of orifices from 0,4 mm to 0,8 mm diameter. This second edition cancels and replaces the first edition... | |
| The document contains definitions of relevant terms. Then specification of general requirements and of specific requirements, as grading, odour, taste, freedom from insects, moulds, etc., extraneous matter, colour, moisture content,... | |
| The guidance describes methods for obtaining optimum conditions, for maintaining quality and avoiding deterioration of Agaricus bisporus L. It includes conditions of harvesting and packing, optimum parameters for storage and... | |
| The guidance specifies materials for prepacking, prepacking systems, quality of foofstuffs for prepacking, treatment of foodstuffs before packing, packing for transport, and marking. A table shows prepacking systems most frequently... | |
| The impact-penetration test described is used for the assessment of plastic films and thin sheets under an impact stress applied at right angles to the plane of the film. This... | |
| The method comsists in preparing of a test solution by adding water to test portion, in the case of products containing more than 10 mg of free sulphur dioxide per... | |
| The method consists in dissolving of a test portion in chloroform, extracting of free glycerol from this sulution with acetic acid solution, oxidizing of 1-monoglycerides in the chloroform solution by... | |
| The method consists in drying of a test portion at 103 + 2 C in an oven at atmosphere pressure, until practically constant mass is reached. It applies to residues... | |
| The method consists in entraining, by means of a strong current of air, of the ammonia from a moderately alkaline test mixture at ambient temperature into standard volumetric sulfuric acid... | |
| The method consists in extracting of the natural colouring matter content with acetone, measuring of the absorbance of the solution obtained using a spectrometer at a wavelength of 460 nm. | |
| The method consists in hydrolysis of the esters present in a test portion by heating in the presence of a standard volumetric solution of potassium hydroxide in dimethylsulfoxide, and back-titration... | |
| The method consists in incinerating of a test portion at 550 + 15 C in an electrically heated muffle furnace, until practically constant mass is reached. It isnot applicable to... | |
| The method consists in passaging of the material through a rotating sample divider and collecting of the fractions, followed by rejection or recombination of some of the fractions. By choosing... | |
| The method is applicable to chromium contents between 0,01 % (m/m) and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements,... | |
| The method is applicable to cobalt contents between 0,01 % (m/m) and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements,... | |
| The method is applicable to copper contents between 0,01 and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calculations and... | |
| The method is applicable to ferrotitanium having titanium contents between 20 and 80 % (m/m). Specifies principle, reagents, apparatus, sample, procedure, expression of results and test report. Figures show the... | |
| The method is applicable to ferrotungsten having tungsten contents between 70 and 90 % (m/m). Specifies principle, reagents, apparatus, sample, procedure, expression of results and test report. It also specifies,... | |
| The method is applicable to fertilizers, dry only, which contain a large proportion of particles of diameters less than 0,5 mm. Its principle is pouring the fertilizer from a specified... | |
| The method is applicable to iron contents between 0,01 and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calculations and... | |
| The method is applicable to manganese contents between 0,01 % (m/m) and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements,... | |
| The method is applicable to products having a titanium content of 0,01 to 0,5 % (m/m). ISO 7723 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus,... | |
| The method is intended for comparing the heat stability by specifying the temperatures of heating and the time of heating; it may also be used for determining the heat resistance... | |
| The method ist applicable to a concentration range of 0,0001 to 0,1 % (m/m) (1 bis 1000 /g) of arsenic in natural iron ores, and iron ore concentrates and agglomerates... | |
| The method of test is applicable to products having dry residues after evaporation greater than or equal to 10 mg/kg Ä0.001 % (m/m)Ü. The principle consists in evaporation of a... | |
| The method specified can also be applied to the examination of other powders or granules which are insoluble in water. It is neither applicable to hydrophobic nor pelletized materials. In... | |
| The method specified determines the percentage mass of moulding material that is transferred through two apertures in the punch of a disc mould during a moulding process carried out under... | |
| The method specified provide an instrumental alternative to those described in ISO 787/16 and ISO 787/17. Equal masses of a coloured material are separately dispersed in the same mass of... | |
| The methods are carried out on the gross sample or sub-sample obtained from a ferroalloy consignment according to the methods prescribed in the relevant International Standard. The methods are applicable... | |
| The oil absorption value is required to be compared with the value determined at the same time on an agreed sample of the product. The principle of the method is... | |
| The output of a data collection system is strongly dependent on the quality of the information collected. Before starting such a system, it is necessary to clearly define the following... | |
| The perforation of a plate is designated by 1: shape of the holes, 2. aperture size, 3. mutual arrangement of holes, 4. pitch, 5. orientation of the arrangement of the... | |
| The principle of the method consists in dissolution of a test portion and filtration of the solution through a tared filter. Washing of the insoluble matter at approximately 50 C... | |
| The principle of the method consists in the hot extraction of the material by following the procedure specified in ISO 787/3, to the stage of obtaining a perfectly clear filtrate. | |
| The principle of the method specified is dispersing the test pigment and an agreed reference pigment in a particular test medium (mixture of an alkyd resin and fumed silica), preparing... | |
| The principle of the method specified is dissolving a test portion in acid, aspiring the test solution into a nitrous oxide-acetylene flame of an atomic absorption spectrometer, measuring the absorbance... | |
| The principle of the method specified is oxidizing the sample in a pressure bomb initially filled at 15 °C to 25 °C with oxygen at 690 kPa, heating at a... | |
| The principle of the specified method of reference consists in the determination of the mass of a volume of the substance at 20 °C which is contained in a pyknometer,... | |
| The products covered in this document may be manufactured from any wrought magnesium alloys, especially from magnesium-aluminium- zinc alloys and magnesium-zirconium- zinc alloys. Tables give tolerances on diameter, random and... | |
| The requirements deal with pipettes which are uncalibrated and intend for the transfer and dispensing of drops of solutions, and suspensions of biological materials. Two sizes are specified, details of... | |
| The specified method is suitable for characterizing the low-viscosity range of glass working: A vertically positioned narrow metal rod, i.e. the bar, is allowed to sink under its own weight... | |
| The specified method provides values being useful for specifying the cooling programme in the production of glassware. The annealing point is determined by measuring the rate of midpoint viscous bending... | |
| The specified methods apply to sampling from containers of all sizes. Separate methods are described for sampling at the point of manufacture, sampling at susequent stages in the distribution chain... | |
| The Standard gives detailed information on all recurrent parameters, apparatus, products, methods and formulae for the analysis. The method consists in analyzing a small quantity of essential oil on a... | |
| The standard includes the establishment of the label size, the position of the declarations and the size of the characters. These details will vary according to whether the container holds... | |
| The temperatur above which the glass is capable of most forming operations is determined by measuring the elongation of a round glass fibre under its own weight. Closely defines requirements... | |
| The temperature characterizes a certain glass transition range from the elastic brittle (low temperature) state to the viscous (high temperature) state of glass. It is used for specifying cooling programmes. | |
| The test is carried out by the following procedure: drying of the sample in the oven at (105 2) °C, passing the dried sample through the sieve and transferring it... | |
| The water used shall be freshly distilled water, boiled before use, but for 5 to 10 min only, in order to avoid an increase of its pH value due to... | |
| These plates and wide flats are rolled on reversing mills. They have nominal thicknesses equal to or less than 150 mm. ISO 7788 specifies requirements, repair procedures, and in annex... | |
| This document specifies a spectrophotometric method. The principle of the method consists in that the nitrate present in the extract of the sample is used to nitrate salicylic acid in... | |
| This document specifies the conditions for ordering, and the conditions for producing, testing and accepting castings. Moreover, it gives casting methods and heat treatment, shape and dimensions and marking. It... | |
| This International Standard specifies a method for the determination of the elastic recovery of sealants after maintained extension. | |
| This International Standard specifies a method for the determination of the resistance to flow of sealants, by loss of cohesion under their own weight. These sealants are used in joints... | |
| This International Standard specifies methods of test for joints with a locked socket and spigot, including double-socket joints, and with elastomeric seals, for buried and non-buried glass-reinforced thermosetting plastics (GRP)... | |
| This method allows continuous measurements viscosity and measurements under various shearing stresses. The viscosity is determined by the flow field coefficient, the torque and the rotational frequency. Two types of... | |
| This part is the first of a series of eight. Specifies procedure for determining the power available at the power take-off, drawbar and belt pulley on tractors. Contains definitions and... | |
| This part of ISO 7404 applies only to determinations made on polished particular blocks using reflected white ligth. The examination is carried out by using reflected ligth microscope and point... | |
| This part of ISO 7637 defines the basic terms relating to electrical disturbances from conduction and coupling used in its other parts, and gives general information on the whole of... | |
| This part of ISO 7787 specifies the shape and dimensional characteristics, number of blades, type of toothing and run-out for the ten most common miniature carbide laboratory cutters, which are... | |
| This part of ISO 787 specifies a general method of test for comparing the lightening (reducing) power of a white pigment with the lightening power of an agreed sample of... | |
| This part of ISO 787 specifies a general method of test for determining the resistivity (specific resistance) of the aqueous extract of a pigment. The method is applicable to all... | |
| This part of ISO 787 specifies a general method of test for determining the water-soluble sulfates, chlorides and nitrates of pigments. | |
| This part specifies a method for the determination of the tensile strength, in the longitudinal direction, of conveyor belts with a steel carcase. Some figures illustrate shapes and reference quantities... | |
| This part specifies the dimensions and associated tolerances for a series of housings to accomodate seals used in reciprocating applications. Does not stipulate details of seal design. This part applies... | |
| This second edition cancels and replaces the first edition (1985), of which 3.2.3 and figures 5 and 6 have been technically revised; clause 5 and table 1 (1985 edition) have... | |
| This second edition cancels and replaces the first edition (ISO 7642:1983), of which certain values have been altered, the previous clause 8 deleted and references updated. Specifies test methods for... | |
| This standard deals with materials, heat treatment and hardness of component parts, corrosion resistance, workmanship and cutting ability of scissors and shears used in the surgery and defines the test... | |
| Two methods of titration depending on whether the end point is detected visually or electrometrically are specified. The visual method is only applicable to colourless solutions but can be used... | |
| Two types are specified: type I with graduation line and colour code which contains its volume when filled to the graduation line from the end away from the colour code,... |
| << Prev | Next >> |