ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| A report should be made for each sample taken. If the sample is divided into a number of equivalent portions, a copy of the report should accompany each portion. An... | |
| A sample of coke greater than 20 mm in size and of known size distribution is subjected to mechanical stresses ina rotating drum. The degree of breakdown of the coke... | |
| Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method | |
| Additional sizes | |
| After incineration of the product at 525 +/- 25 degrees centigrade the method consists in a) in the case of total ash: addition of an excess of standard volumetric sulphuric... | |
| Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 2: Coupling ring 40 with socket | |
| Amends definitions 1.3.21 (lawn edge trimmer) and 1.3.22 (lawn trimmer), adds text to subclauses 2.2.9.1, 3.3.2.1.1 and 3.3.2.1.3, replaces subclause D.3.2 and deletes its footnote 4), adds a new subclause... | |
| Amplifies the general principles to be observed in designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment, provides a detailed... | |
| Anaesthetic and respiratory equipment -- Tracheal tubes and connectors | |
| Anaesthetic and respiratory equipment -- Tracheostomy tubes -- Part 1: Tubes and connectors for use in adults | |
| Anaesthetic and respiratory equipment -- Tracheostomy tubes -- Part 3: Paediatric tracheostomy tubes | |
| Animal and vegetable fats and oils -- Sampling | |
| Applicable to products having Ca contents equal to or more than 50 mg/kg. The presence of soluble SiO2 up to 5 g/ml in the test solution does not interfere. Hydrolysis... | |
| Applicable to products having contents, expressed as phosphorus pentoxide, of 0.005 % (m/m) to 0.05 % (m/m). The residue from the determination of the loss of mass according to ISO... | |
| Applicable to products which consist essentially of xylene isomers ÄC6H4 -(CH3 )2 Ü and ethylbenzene (C6H5 -C2 H5). Specifies the requirements and test methods. The required characteristics are shown in... | |
| Applicable to the determination of losses equal to or more than 0.008 % (m/m). The principle consists in drying of a test portion at (105 1) °C for 6 h. | |
| Application, in particular, to samples of intensely flavoured products and to samples of very concentrated products. The principle consists in making a preperation which allows direct assessment of the organoleptic... | |
| Applies to a wide range of papers and boards, but for some materials, such as multi-ply papers and boards, papers and boards with appreciable curl, some soft papers with grammage... | |
| Applies to blocks intended for the manufacture of strips for different types of parquet flooring. Specified are materials, design and manufacture, dimensions, squareness of ends, and permissible deviations, moisture, the... | |
| Applies to metal wire cloth with square openings and perforated plates or sheets with square or circular openings. Tables include principal sizes and supplementary sizes. Sizes of 1 mm and... | |
| Applies to paving used for covered (indoor) and open (outdoor) spaces. Blocks made of Fagus sylvatica wood are intended for use in covered spaces only. The permissible wood or sawing... | |
| Applies to paving used for covered (indoor) and open (outdoor) spaces. The permissible wood or sawing defects and corresponding acceptance conditions are listed in a table. | |
| Applies to single layers of glued and laminated solid fibreboard and is applicable to all types of solid fibreboard as defined in ISO 4046, provided that the adhesive dessolves under... | |
| As-sintered hardmetal pellets used in heading dies -- Dimensions and tolerances | |
| Belt drives -- Grooved pulleys for joined narrow V-belts -- Groove sections 9N/J, 15N/J and 25N/J (effective system) | |
| Bicycle tyres and rims -- Part 1: Tyre designations and dimensions | |
| Breathing tubes intended for use with anaesthetic apparatus and ventilators | |
| Cancels and replaces the first edition (1974). Specifies a method for the determination of the bulk density of coke in a cubical container of capacity of 0,2 m^3. Applicable to... | |
| Cancels and replaces the first edition (1978). Establishes terminology for warp creels and specifies their main dimensions. | |
| Cancels and replaces the first edition (1980). Specifies generally acceptable formulae for power ratings, together with appropriate correction terms and factors used in the design of industrial V-belt and V-ribbed... | |
| Cancels and replaces the first edition (1984). Specifies a method of measuring the smoothness of paper and board, called the Bekk method. Especially recommended for smooth paper and boards. However... | |
| Cinematography -- Image produced by camera aperture Type W on 16 mm motion-picture film -- Position and dimensions | |
| Coated abrasives -- Flap wheels with incorporated flanges or separate flanges | |
| Contains a set of 73 graphic characters with their coded representations. Consists of a code table and a legend showing each graphic, its use, and its name. Explanatory notes are... | |
| Contains a set of 76 graphic characters with coded representations. Consists of a code table and a legend showing each graphic, its use, and its name. The character set is... | |
| Contains details on the sampling of domestic and industrial waste water, i.e. the design of sampling programmes and techniques for collection of samples including safety aspects. Covers waste water in... | |
| Contains general, physical and magnetic characteristics and guideline for preinitialization for physical exchange of 200-Mbyte magnetic twelve-disk packs for use in electronic data processing systems. | |
| Covers a method enabling quantities of chloride eceeding 1 mg in the test portion to be determined with an absolute error of 0,2 to 0,5 mg, according to the concentration... | |
| Covers the requirements for dried leaves or broken or rubbed dried leaves of peppermint. Describes sampling, methods of test, packing and marking. Annex A specifies a recommended procedure for identifying... | |
| Covers the requirements for this spice, describes sampling, methods of test, and packing and marking. An annex includes recommendations relating to storage and transport conditions. | |
| Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile | |
| Defines 158 basic terms of parts of weaving machines in English, French, German and Chinese. The terms are classified under the following main headings: Designation of sides and measurements, Weaving... | |
| Defines 9 general terms, 146 terms for equipment for applying sprays, 11 terms for equipment for applying dust, 8 terms for equipment for applying granules, and 23 other terms. | |
| Defines an identification code for hydraulic valve mounting surfaces and for hydraulic cartridge valve cavities consisting of five groups of numbers. Examples are given for each valve type. | |
| Defines basic terms used in the winding of yarns, onto formers or other suitable devices, by means of winding machines. This does not exclude the use of the terms in... | |
| Defines dimensional, physical and magnetic characteristics of the 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad on one side so as to provide physical... | |
| Defines the principles and the technique of the tests designed to determine the conventional mechanical characteristics of assemblies produced with soft solders and brazing filler metals. Specifies also a method... | |
| Defines three types. They are often required in order to investigate the effect of extreme climatic conditions on test specimens. Such atmospheres often differ greatly from ordinary ambient conditions. | |
| Dehydrated garlic (Allium sativum L.) -- Specification | |
| Describes a method based on a number of international collaborative studies carried out over a long period of time. The method seeks to optimize a number of variables in an... | |
| Describes a method based on the extraction of the pigments of turmeric with hot ethanol, dilution of the extract and spetrophotometric measurement at the wavelenghth of maximum absorption. The result... | |
| Describes methods for estimating the accuracy of hydraulic sprayer nozzles for hydraulic spraying. Replaces the first edition. | |
| Destruction of organic matter by sulphuric acid in the presence of a compound catalyst (see ISO 1871), alkalization of the reaction products, destillation of the liberated ammonia and collection in... | |
| Destructive tests on welds in metallic materials -- Longitudinal tensile test on weld metal in fusion welded joints | |
| Details the requirements for this product, describes sampling, methods of test, and packing and marking. Is not applicable to Carum bulbocastanum. The chemical requirements are indicated in an extra table. | |
| Divides the blocks by quality into the three grades (+++), (++), and (+) corresponding to the conditions stated in the tables. Refers to a protection treatment to the parts of... | |
| Divides the blocks by quality into the two grades I and II corresponding to the conditions stated in the tables. The regulations for manufacture, characteristics and delivery conditions are fixed... | |
| Divides the non-assembled strips by quality into the three grade (+++), (++), and (+) corresponding to the conditions stated in the tables. The regulations for manufacture, characteristics and delivery conditions... | |
| Does not apply to caseins and caseinates containing ammonium caseinate or other ammonium compounds, or other nitrogenous nonprotein compounds. The principle of determination consists in digesting a test portion with... | |
| Entrainment in a current of nitrogen of the gas extracted from the acidified and heated product, and fixing and oxidation of the gas by bubbling through a dilute solution of... | |
| Equipment for crop protection -- Spraying equipment -- Part 2: Test methods for hydraulic sprayers | |
| Equipment for harvesting -- Combine harvesters -- Determination and designation of grain tank capacity and unloading device performance | |
| Equipment for working the soil -- Fixing bolts for soil working elements | |
| Establishes an initial list of equivalent terms identifying component parts of different basic types of combine harvesters. Gives the equivalent terms in Engish, French and Russian, and additionally in German,... | |
| Establishes provisions for the safe design, construction, installation and operation of stationary and skid-mounted compressors. Specifies requirements to help minimizing compressor accidents and defines general safety practices for the field. | |
| Establishes terms and definitions and shows related figures. The terms and definitions are not restrictive. Included are alphabetical indices in the three ISO languages. | |
| Establishes terms and definitions for the purpose of expressing as correctly as possible concepts. These terms and definitions are not restrictive. Included are alphabetical indices in the three ISO languages. | |
| Establishes terms and definitions, specifies safety requirements and test procedures. This first edition cancels and replaces the previous editions of separate parts: ISO 5395-1:1984, 5395-2:1981, 5395-3:1985 and its Addendum, and... | |
| Forms the first of a set dealing with tests of pumps and specifies precision class tests (former class A). Engineering class I and class II tests (former classes B and... | |
| Fruits, vegetables and derived products -- Decomposition of organic matter prior to analysis -- Ashing method | |
| Garden equipment -- Safety requirements for combustion-engine-po wered lawnmowers -- Part 2: Pedestrian-controlle d lawnmowers | |
| Garden equipment -- Safety requirements for combustion-engine-po wered lawnmowers -- Part 3: Ride-on lawnmowers with seated operator | |
| Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Positional tolerancing | |
| Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures | |
| Geometrical product specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 2: Software measurement standards | |
| Gives a classification of various types of compressors and some definitions. a list of equivalent English and French terms relating to some of the types is given in an annex,... | |
| Gives a list of 86 terms relating to cereals and their definitions, in English and French. The terms are given under the following headings: general terminology, terminology relating to physiology,... | |
| Gives a method for the determination of this quantity of transparent and light-coloured hydrocarbon liquids such as are used in capacitors, transformers, circuit breakers and in cables of the oil-filled... | |
| Gives a procedure for raw, potable and waste water. An ammonium nitrogen content of up to 10 mg in the test portion may be determined. | |
| Gives general guidance for the application of gas-liquid chromatography to determine the qualitative and quantitative composition of a micxture of fatty acid methyl esters obtained according to ISO 5509. The... | |
| Gives the terminology of the designs of hardmetal heading dies (see table 1) and heading and extruding dies (see table 2) as well as the symbols and corresponding terms for... | |
| Graphical symbols for textile machinery | |
| Ground high speed steel tool bits | |
| Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities | |
| Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces | |
| Indicates recommended scales and their designation for use in any field of engineering. Gives definitions for the scale types and relevant terms. The complete designation shall consists of the word... | |
| Industrial valves -- Part-turn actuator attachments | |
| Is applicable to all types of paper and board which have a degree of water resistance, and it is not applicable to very absorbent papers such as toilet tissue. | |
| Is applicable to papers and boards which have been rendered water resistant or waterproof by internal sizing, by surface sizing, by coating, or by lamination using waterproof laminants , or... | |
| Is based on Standard No.115 of the International Assotiation for Cereal Science and Technology (ICC). The method consists in measuring and recording of the consitency of a dough as it... | |
| Is limited to the furnishing and beating of the stock, the with-drawal and distribution of the samples, and the beating equipment. The beating is a preliminary step in testing the... | |
| Is primarily intended for high purity papers such as are used for insulation in electrical equipment, and does not contain any statement about the tests to be made on the... | |
| Is suitable for use with most kinds of paper. However, it may not be suitable for some papers, which soaking makes extremely fragile and causes to curl excessively. The property... | |
| ISO 5-2:2009 specifies the geometric conditions for measuring ISO 5 standard diffuse and ƒ/4,5 and ƒ/1,6 projection transmittance densities. ISO 5 standard diffuse density is primarily applicable to... | |
| ISO 5-3:2009 specifies spectral conditions and computational procedures for the definition of several types of ISO 5 standard densities used in imaging applications in photography and graphic technology. | |
| ISO 5-4:2009 specifies the geometric conditions for the definition of ISO 5 standard reflection density. It also recommends tolerances on geometric conditions that can be used in the design of... | |
| ISO 5172:2006 specifies specifications and tests for blowpipes for gas welding, heating and cutting of metals. It applies to manual blowpipes for welding and heating with a nominal thermal power... | |
| ISO 5173:2009 specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad... | |
| ISO 5182:2008 specifies the characteristics of materials for resistance welding electrodes and ancillary equipment which are used for carrying current and transmitting force to the work. | |
| ISO 518:2006 specifies the dimensions of camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units. The dimensions given are basic for the solid shoe. | |
| ISO 5208:2008 specifies examinations and tests that a valve manufacturer needs to act upon in order to establish the integrity of the pressure boundary of an industrial metallic valve and... | |
| ISO 520:2010 specifies a method for the determination of the mass of 1 000 grains of cereals and pulses. ISO 520:2010 is applicable to all species of cereals and pulses... | |
| ISO 521:2011 specifies the dimensions of machine chucking reamers with cylindrical shanks and Morse taper shanks. It deals with the following types of reamer: machine chucking reamers with cylindrical shanks... | |
| ISO 5234:2005 defines dimensions, types and mounting of saw-tooth wire for metallic card clothing with various cross-sections and tooth forms. | |
| ISO 5243:2004 gives the principle for the numbering of the heald frames and drop wire bars of the warp stop motions in a loom. | |
| ISO 5247-1:2004 establishes a vocabulary of terms and a system of classification for weaving machines used in the textile industry for the production of woven fabrics by the weaving technique,... | |
| ISO 5248:2002 presents an illustrated vocabulary, in English, French and German, of the most common ancillary devices placed before, between and after dyeing and finishing machines. | |
| ISO 5250:2003 gives an illustrated nomenclature, in English, French and German, of the machines known as tenters (US) and/or stenters (GB), used in the textile finishing industry (bleaching, dyeing, printing... | |
| ISO 525:2013 is applicable to bonded abrasive products (e.g. grinding wheels, segments, sticks and stones) in general, excluding superabrasive products and coated abrasive products. ISO 525:2013 specifies: the ISO type... | |
| ISO 5263-1:2004 specifies an apparatus and the procedure for the laboratory-wet disintegration of chemical pulps. This apparatus and procedure are required for preparation of the test portion in a number... | |
| ISO 5263-2:2004 specifies an apparatus and the procedures for the laboratory-wet disintegration of mechanical pulps that do not exhibit latency or pulps where latency has already been removed. This apparatus... | |
| ISO 5263-3:2004 specifies an apparatus and the procedures for the laboratory wet disintegration of mechanical pulps that exhibit latency. This apparatus and procedure are required for preparation of the test... | |
| ISO 5264-2:2011 specifies a method for the laboratory beating of pulp using a PFI mill. The description is limited to the sampling, preparation and beating of the pulp and the... | |
| ISO 5269-1:2005 specifies a method, using a conventional sheet former, for the preparation of laboratory sheets of pulp for the purpose of carrying out subsequent physical tests on these sheets... | |
| ISO 5269-2:2004 specifies a method, using a Rapid-Köthen sheet former, for the preparation of laboratory sheets of pulp for the purpose of carrying out subsequent physical tests on these sheets... | |
| ISO 5269-3:2008 specifies two procedures for preparing a closed water system which is in retention equilibrium, to be used for the preparation of laboratory sheets from pulps with a high... | |
| ISO 527-1:2012 specifies the general principles for determining the tensile properties of plastics and plastic composites under defined conditions. Several different types of test specimen are defined to suit different... | |
| ISO 527-2:2012 specifies the test conditions for determining the tensile properties of moulding and extrusion plastics, based upon the general principles given in ISO 527‑1. | |
| ISO 527-5:2009 specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in ISO 527-1. The test method... | |
| ISO 5270:2012 specifies the relevant International Standards to be used for the determination of physical properties of laboratory sheets made of all kind of pulps. It is applicable to laboratory... | |
| ISO 5275: 2003 specifies a procedure (Doctor test) for the detection of thiols (mercaptans), hydrogen sulfide and elemental sulfur in hydrocarbon solvents and distillate petroleum feedstocks and products. | |
| ISO 5285:2012 gives guidelines for creating the most suitable conditions for the storage and handling of conveyor belts. It is not applicable to light conveyor belts, as described in ISO... | |
| ISO 5287:2003 specifies a fatigue test for the quality control of narrow V-belts (sections AV 10 and AV 13) intended for driving the auxiliaries of internal combustion engines used for... | |
| ISO 5291:2011 specifies the principal characteristics of grooved pulleys (for groove sections AJ, BJ, CJ and DJ), intended to take joined classical V-belts for industrial power transmission drives. | |
| ISO 5293:2004 specifies the formula for calculating conveyor belt transition distances and details its application and derivation. ISO 5293:2004 is not suitable or valid for light conveyor belts. | |
| ISO 5294:2012 specifies the principal characteristics of synchronous pulleys for use in synchronous endless belt drives for mechanical power transmission and where positive indexing or synchronization is required. The principal... | |
| ISO 5302:2003 specifies methods for the measurements of performance characteristics of turbomolecular pumps. It is applicable to all sizes and all types of turbomolecular pumps, with mechanical or magnetic bearings,... | |
| ISO 5344:2004 specifies the performance characteristics and performance test conditions for electrodynamic vibration generator systems and provides a list of additional equipment characteristics that can be declared by the equipment... | |
| ISO 5350-1:2006 specifies a method for the estimation by transmitted light of the visible dirt and shives in laboratory sheets prepared from pulp. It is, in principle, applicable to all... | |
| ISO 5350-2:2006 specifies a method for the estimation by transmitted light of the visible dirt and shives in pulp manufactured in sheets. It does not apply to unbleached kraft pulps... | |
| ISO 5350-3:2007 specifies a procedure for the estimation of the visible dirt and shives by reflected light using the Equivalent Black Area (EBA) method in pulps. It is, in principle,... | |
| ISO 5350-4:2006 specifies a method using instrumental inspection by reflected light for the estimation of visible dirt and shives in pulp manufactured in sheets, in terms of Equivalent Black Area... | |
| ISO 5351:2010 specifies a method which yields a number that is an estimate of the limiting viscosity number of pulp in a dilute cupri-ethylenediamin e (CED) solution. ISO 5351:2010 is... | |
| ISO 5355:2005 specifies the requirements, test methods and marking of ski-boots that are used with current systems of alpine ski-bindings with attachment at the boot toe and boot heel, the... | |
| ISO 5356-1:2004 specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment, e.g. in breathing systems, anaesthetic-gas scavenging systems and vaporizers. ISO 5356-1:2004 gives... | |
| ISO 5356-2:2012 specifies dimensional requirements for screw-threaded weight-bearing conical connectors intended for use with inhalation anaesthesia apparatus and ventilators. Such connectors are intended for mounting heavy accessories. ISO 5356-2:2012 specifies... | |
| ISO 5359:2008 specifies requirements for low-pressure hose assemblies intended for use with the following medical gases: oxygen; nitrous oxide; medical air; helium; carbon dioxide; xenon; specified mixtures of the gases... | |
| ISO 5360:2012 specifies requirements, including dimensions, for agent-specific filling systems for agent-specific anaesthetic vaporizers. ISO 5360:2012 does not specify construction materials. Because of the unique properties of desflurane, dimensions for... | |
| ISO 5362:2006 specifies requirements for antistatic and non-antistatic reservoir bags for use with anaesthetic apparatus or lung-ventilator breathing systems. It includes requirements for the design of the neck, size designation,... | |
| ISO 5364:2008 specifies requirements for oropharyngeal airways of plastics materials and/or rubber, including those with a reinforcement insert made of plastics materials and/or metal. Flammability of oropharyngeal airways, for example... | |
| ISO 536:2012 specifies a method for determining the grammage of paper and board. | |
| ISO 5389:2005 applies to performance tests on turbocompressors of all types. ISO 5389:2005 does not apply to fans and high-vacuum pumps, or to jet-type compressors with moving drive components Turbocompressors... | |
| ISO 5391:2003 provides a vocabulary for the various types of pneumatic tools and machines, and the attachments that are used with them. | |
| ISO 5398-1:2007 describes a method for the determination of chromium in aqueous solution obtained from leather. This is an analysis for total chromium in leather; it is not compound specific... | |
| ISO 5398-2:2009 describes the determination of chrome by colorimetric means. It is applicable to leathers which are expected to have chromic oxide contents in excess of 0,05 %. This is... | |
| ISO 5398-3:2007 describes a method for the determination of chromium in aqueous solution obtained from leather. This is an analysis for total chromium in leather; it is not compound specific... | |
| ISO 5398-4:2007 describes a method for the determination of chromium in aqueous solution obtained from leather. This is an analysis for total chromium in leather; it is not compound specific... | |
| ISO 5402-1:2011 specifies a method for determining the wet or dry flex resistance of leather and finishes applied to leather. It is applicable to all types of flexible leather which... | |
| ISO 5403-1:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated linear compression. It is applicable to all flexible leathers but is particularly suitable... | |
| ISO 5403-2:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated angular compression. It is applicable to all flexible leathers but is particularly suitable... | |
| ISO 5404:2011 specifies a method for determining the water resistance of heavy leathers. The method allows determination of the penetration time, water absorption, area of penetration and water penetration rate... | |
| ISO 5408:2009 specifies the fundamental terms and definitions for screw threads. These terms are applicable to symmetrical threads and unsymmetrical threads, or cylindrical threads and taper threads. | |
| ISO 540:2008 specifies a method of determining the characteristic fusion temperatures of ash from coal and coke. | |
| ISO 5414-1 lays down the dimensions of tool chucks (end mill holders) with clamp screws designed for driving flatted cylindrical shanks in accordance with ISO 3338-2 and specifies the clamp... | |
| ISO 5414-2 specifies the dimensions of tool chucks (end mill holders) with clamp screws for tools with flatted cylindrical shanks in accordance with ISO 3338-2. It also specifies the designations... | |
| ISO 5415:2007 specifies the dimensions of reduction sleeves with 7/24 external taper No. 30-40-45-50 and 60 and Morse internal taper No. 1 to 6 (Morse taper No. 4, 5 and... | |
| ISO 5416:2006 specifies a titrimetric method for the determination of the mass fraction of metallic iron in reduced iron ores (direct reduced iron: DRI). This method is applicable to mass... | |
| ISO 5418-1:2006 specifies a 2,2'-biquinolyl spectrophotometric method for the determination of copper in iron ores. This method is applicable to mass fractions of copper between 0,005 % and 0,77 %... | |
| ISO 5418-2:2006 specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of copper in iron ores. This method is applicable to a mass-fraction range of... | |
| ISO 5419 relates to twist drills and shows the various types in common use and associated geometrical definitions. In addition to terms given in the three official ISO languages (English,... | |
| ISO 5420 relates to reamers and shows the various types in common use and associated geometrical definitions. In addition to terms given in the three official ISO languages (English, French... | |
| ISO 5431:2013 specifies requirements, methods of sampling and methods of test for wet blue leather produced from goat skins tanned without hair and with the use of basic chromium sulfate... | |
| ISO 5432:2013 specifies requirements, methods of sampling and methods of test for wet blue leather produced from sheep skins tanned without wool and with the use of basic chromium sulfate... | |
| ISO 5435:2008 specifies a method for the determination of the tinting strength of carbon black relative to an industry tint reference black. The method is based on the use of... | |
| ISO 544:2011 specifies technical delivery conditions for filler materials and fluxes for fusion welding. ISO 544:2011 does not apply to other auxiliary materials such as shielding gases. | |
| ISO 5459:2011 specifies terminology, rules and methodology for the indication and understanding of datums and datum systems in technical product documentation. It also provides explanations to assist the user in... | |
| ISO 5468:2006 specifies the dimensions, in millimetres, of rotary and rotary impact masonry drill bits with hardmetal tips, having diameters in the range 4 mm to 25 mm inclusive and... | |
| ISO 5470-2:2003 details two separate methods for determining the resistance of a material to wet and dry abrasion. It is applicable to the coated surface or surfaces of coated fabrics. | |
| ISO 5478:2006 specifies a method for the determination of the styrene content of all types of styrene-butadiene rubber (SBR), including oil-extended types. The method is applicable to styrene-butadiene rubbers reinforced... | |
| ISO 5483: 2003 specifies dimensions and materials for welding rings and drain screws situated at the bottom of oil and water tanks. | |
| ISO 5489:2007 specifies requirements for a ship's embarkation ladder that is provided to enable safe embarkation of waterborne survival craft along a vertical portion of the ship's hull. It is... | |
| ISO 5492:2008 defines terms relating to sensory analysis. ISO 5492:2008 applies to all industries concerned with the evaluation of products by the sense organs. The terms are given under the... | |
| ISO 5495:2005 describes a procedure for determining whether there exists a perceptible sensory difference or a similarity between samples of two products concerning the intensity of a sensory attribute. This... | |
| ISO 5496:2006 describes several types of method for determining the aptitude of assessors and for training assessors to identify and describe odoriferous products. The methods described in ISO 5496:2006 are... | |
| ISO 5507:2002 gives the botanical names of the main species of oleaginous plants, together with the names of the corresponding raw materials and oils (fats). An alphabetical index of the... | |
| ISO 5518:2007 specifies a method for determining the benzoic acid content of fruits, vegetables and derived products. As chlorobenzoic acids are resistant to oxidation, the method cannot be applied in... | |
| ISO 5519:2008 specifies a method for extracting the sorbic acid present in fruits, vegetables and derived products, and two techniques for determining the sorbic acid extracted. | |
| ISO 5526:2013 lists the botanical names of the main species of: a) cereals (Clause 3); b) pulses (Clause 4); c) other food grains (Clause 5). ISO 5526:2013 also lists the... | |
| ISO 5529:2007 describes a method, known as the Zeleny sedimentation test, for assessing one of the factors determining the quality of wheat as a means of predicting the baking strength... | |
| ISO 5530-1:2013 specifies a method, using a farinograph, for the determination of the water absorption of flours and the mixing behaviour of doughs made from them by a constant flour... | |
| ISO 5534|IDF 4:2004 specifies the reference method for the determination of the total solids content of cheese and processed cheese. | |
| ISO 5536|IDF 23:2009 specifies a method for the determination of the water content of milk fat products by the Karl Fischer method. The method is applicable to butteroil (anhydrous butteroil,... | |
| ISO 5537|IDF 26:2004 specifies a method for the determination of the moisture content of all types of dried milk. | |
| ISO 5538|IDF 113:2004 specifies sampling plans for the inspection by attributes of milk and milk products. It is intended to be used to choose a sample size for any situation... | |
| ISO 5543|IDF 127:2004 specifies the reference method for the determination of the fat content of all types of caseins and caseinates. | |
| ISO 5544│IDF 89:2008 specifies a reference method for the determination of the "fixed ash" of caseins, as a percentage by mass, obtained by acid precipitation or lactic fermentation, of ammonium... | |
| ISO 5545│IDF 90:2008 specifies a reference method for the determination of the ash of caseins obtained by rennet precipitation and of caseinates, with the exception of ammonium caseinate. | |
| ISO 5546|IDF 115:2010 specifies a reference method for the determination of the pH of all types of casein (acid caseins and rennet caseins) and of caseinates. | |
| ISO 5547│IDF 91:2008 specifies a reference method for the determination of the free acidity of caseins obtained by acid precipitation or lactic fermentation and of rennet caseins. | |
| ISO 5548|IDF 106:2004 specifies a photometric method for the determination of the content of lactose and other soluble carbohydrates in caseins and caseinates containing less than 2,0 % of total... | |
| ISO 5550|IDF 78:2006 specifies the reference method for the determination of the moisture content of all types of caseins and caseinates. | |
| ISO 5597:2010 establishes the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder rod and piston seal housings for reciprocating applications in the following range... | |
| ISO 5598:2008 establishes the vocabulary, in English, French and German, for all fluid power systems and components, excluding aerospace applications and compressed air supply installations. | |
| ISO 5600:2011 specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of... | |
| ISO 5603:2011 specifies two methods for determining the adhesion strength of vulcanized rubber to wire cord which is embedded in the rubber. The two methods do not necessarily give the... | |
| ISO 5608:2012 establishes a code for the designation of turning and copying tool holders and cartridges with a rectangular shank, having a standardized dimension, f, intended for use with indexable... | |
| ISO 5609 5:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank, style U, i. e. with reduced shank and cutting edge angle equal to 93°. These... | |
| ISO 5609 6:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank, style Q, i.e. with reduced shank and cutting edge angle equal to 107,5°. These tool... | |
| ISO 5609-1:2012 specifies the code for the designation, styles, general dimensions and calculation for corrections for tool holders for internal turning with cylindrical shank. It is intended to be used... | |
| ISO 5609-2:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank, style F, i.e. with reduced shank and cutting edge angle equal to 90°. These tool holders... | |
| ISO 5609-3:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank, style K, i.e. with reduced shank and cutting edge angle equal to 75°. These tool holders... | |
| ISO 5609-4:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank, style L, i.e. with reduced shank and cutting edge angle equal to 95°. These tool holders... | |
| ISO 5610-10:2010 specifies tool holders with rectangular shank, style N, i.e. with straight shank and cutting edge angle kr = 63° for side cutting. These tool holders are primarily... | |
| ISO 5610-11:2010 specifies tool holders with rectangular shank, style R, i.e. with offset shank and cutting edge angle equal to 75° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-12:2010 specifies tool holders with rectangular shank, style S, i.e. with offset shank and cutting edge angle equal to 45° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-13:2010 specifies tool holders with rectangular shank, style T, i.e. with offset shank and cutting edge angle equal to 60° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-14:2010 specifies tool holders with rectangular shank, style H, i.e. with offset shank and cutting edge angle equal to 107,5° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-15:2010 specifies tool holders with rectangular shank, style V, i.e. with offset shank and cutting edge angle equal to 72,5° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-1:2010 specifies tool holders with rectangular shank for indexable inserts and specifies their styles in relation to their dimensions according to ISO 5610‑2, ISO 5610‑3, ISO 5610‑4, ISO 5610‑5,... | |
| ISO 5610-2:2010 specifies tool holders with rectangular shank, style A, i.e. with straight shank and cutting edge angle equal to 90° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-3:2010 specifies tool holders with rectangular shank, style B, i.e. with straight shank and cutting edge angle equal to 75° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-4:2010 specifies tool holders with rectangular shank, style D, i.e. with straight shank and cutting edge angle equal to 45° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-5:2010 specifies tool holders with rectangular shank, style F, i.e. with straight shank and cutting edge angle equal to 90° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-6:2010 specifies tool holders with rectangular shank, style G, i.e. with offset shank and cutting edge angle equal to 90° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-7:2010 specifies tool holders with rectangular shank, style J, i.e. with offset shank and cutting edge angle equal to 93° for side cutting. These tool holders are primarily intended... | |
| ISO 5610-8:2010 specifies tool holders with rectangular shank, style K, i.e. with offset shank and cutting edge angle equal to 75° for end cutting. These tool holders are primarily intended... | |
| ISO 5610-9:2010 specifies tool holders with rectangular shank, style L, i.e. with offset shank and cutting edge angle equal to 95° for end cutting. These tool holders are primarily intended... | |
| ISO 5628:2012 specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the... | |
| ISO 562:2010 specifies a method of determining the volatile matter of hard coal and of coke. It is not applicable to brown coals and lignites. | |
| ISO 5630-5:2008 specifies a method for accelerating the ageing of printing and writing papers, through the use of elevated temperature, and assessing its effect on the mechanical properties of fold... | |
| ISO 5630-6:2009 specifies a method for accelerating the ageing of printing and writing papers through exposure to nitrogen dioxide gas and assessing the effect on mechanical and optical properties for... | |
| ISO 5631-1:2009 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss. ISO 5631-1:2009 is not applicable to... | |
| ISO 5631-2:2008 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss. It may be used to determine... | |
| ISO 5631-3:2008 specifies a method for measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss. ISO 5631-3:2008 is primarily intended for... | |
| ISO 5636-4:2005 specifies a method of determining the air flow rate through unit area of a sheet of paper or board, under unit pressure difference using apparatus called the Sheffield... | |
| ISO 5636-5:2003 specifies the Gurley method of determining the air permeance of paper and board. It is applicable to papers and boards which have air permeances between 0,1 micrometres per... | |
| ISO 5658-2:2006 specifies a method of test for measuring the lateral spread of flame along the surface of a specimen of a product orientated in the vertical position. ISO 5658-2:2006... | |
| ISO 5659-2:2012 specifies a method of measuring smoke production from the exposed surface of specimens of materials, composites or assemblies. It is applicable to specimens that have an essentially flat... | |
| ISO 5660-1:2002 specifies a method for assessing the heat release rate of a specimen exposed in the horizontal orientation to controlled levels of irradiance with an external igniter. The heat... | |
| ISO 5660-2:2002 specifies a small-scale method for assessing the dynamic smoke production rate of essentially flat specimens exposed to controlled levels of radiant heating under well-ventilated conditions with or without... | |
| ISO 5667-11:2009 provides guidance on the sampling of groundwaters. It informs the user of the necessary considerations when planning and undertaking groundwater sampling to survey the quality of groundwater supply,... | |
| ISO 5667-13:2011 gives guidance on the sampling of sludges from wastewater treatment works, water treatment works and industrial processes. It is applicable to all types of sludge arising from these... | |
| ISO 5667-15:2009 provides guidance on procedures for the preservation, handling and storage of samples of sewage and waterworks sludge, suspended matter, saltwater sediments and freshwater sediments, until chemical, physical, radiochemical... | |
| ISO 5667-17:2008 is applicable to the sampling of suspended solids for the purpose of monitoring and investigating freshwater quality, and more particularly to flowing freshwater systems such as rivers and... | |
| ISO 5667-19:2004 provides guidance for the sampling of sediments in marine areas for analyses of their physical and chemical properties for monitoring purposes and environmental assessments. It encompasses sampling strategy,... | |
| ISO 5667-1:2006 sets out the general principles for, and provides guidance on, the design of sampling programmes and sampling techniques for all aspects of sampling of water (including waste waters,... | |
| ISO 5667-20:2008 establishes principles, basic requirements, and illustrative methods for dealing with the use of sample data for decision making based on the assessment of the confidence that water quality:... | |
| ISO 5667-21:2010 establishes principles to be applied to the techniques of sampling water provided for drinking and for use in the manufacture of food and beverage products. The guidance given... | |
| ISO 5667-22:2010 give guidelines for the design, construction and installation of groundwater quality monitoring points to help ensure that representative samples of groundwater can be obtained. Within the guidance consideration... | |
| ISO 5667-23:2011 specifies procedures for the determination of time-weighted average concentrations and equilibrium concentrations of the free dissolved fraction of organic and organometallic compounds and inorganic substances, including metals, in... | |
| ISO 5667-3:2012 establishes general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses. It is not applicable to water samples intended for... | |
| ISO 5667-5:2006 establishes principles to be applied to the techniques of sampling water intended for human consumption. For the purposes of ISO 5667-5:2006, water intended for human consumption comprises: all... | |
| ISO 5667-6:2005 sets out the principles to be applied to the design of sampling programmes, sampling techniques and the handling of water samples from rivers and streams for physical and... | |
| ISO 5673-1:2005 specifies the power take-off (PTO) drive shafts of a tractor or self-propelled machine used in agriculture and the power-input connection (PIC) of its implement, establishing a method for... | |
| ISO 5673-2:2005 gives the forms and applications of (PTO) drive shafts for tractors and self-propelled machines used in agriculture, and specifies the dimensions for, and clearance zone around, the implement... | |
| ISO 5674:2004 specifies laboratory tests for determining the strength and wear resistance of guards for PTO drive shafts on tractors and machinery used in agriculture and forestry, and their acceptance... | |
| ISO 5675:2008 specifies the essential interface dimensions, as defined in ISO 7241-1, and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural machinery. | |
| ISO 5692-1:2004 specifies the requirements for the attachment of agricultural non-balanced trailers and implements by means of hitch-rings to the rear of the towing vehicle equipped with either a hook... | |
| ISO 5692-3:2011 specifies the requirements for hitch rings used for the attachment of agricultural trailers and implements to the rear of self-propelled agricultural vehicles equipped with a non-swivel clevis coupling... | |
| ISO 5700:2013 specifies a static test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled or tracked tractors for agriculture and forestry. It is applicable... | |
| ISO 5707:2007 specifies the minimum performance and information requirements and certain dimensional requirements for satisfactory functioning of milking machines, for milking and cleaning. It also specifies minimum requirements for materials,... | |
| ISO 5718 specifies the material characteristics of, and marking requirements for, blades on agricultural rotary mowers used for harvesting. In addition, because the blades on agricultural rotary mowers are exposed... | |
| ISO 5721-1:2013 specifies the requirements, test procedures and acceptance criteria for the field of vision to the front of the operator of agricultural tractors. | |
| ISO 5738|IDF 76:2004 specifies a reference method for the determination of the copper content of milk and milk products. The method is applicable to: a) milk, skimmed milk and buttermilk; | |
| ISO 5739|IDF 107:2003 specifies a method for the determination of the contents of scorched particles and of extraneous matter in caseins and caseinates. | |
| ISO 5742:2004 gives a nomenclature of pliers and nippers in English and French. | |
| ISO 5743:2004 specifies the general technical requirements to be met by pliers and nippers. It does not specify insulating or antistatic characteristics of handle coatings. Plastic coatings or plastic sleeves... | |
| ISO 5744:2004 specifies methods of test for checking the correct functioning of pliers and nippers. The test parameters have been specified on the basis of the functional uses of the... | |
| ISO 5745:2004 specifies the principal dimensions of pliers for gripping and manipulating and the test values for the pliers in order to verify their aptitude to function in conformity with... | |
| ISO 5746:2004 specifies the principal dimensions of engineer's and lineman's pliers and the test values for the pliers in order to verify their aptitude to function in conformity with ISO... | |
| ISO 5748:2004 specifies the principal dimensions of end cutting nippers and the test values for the nippers in order to verify their aptitude to function in conformity with ISO 5744:2004. | |
| ISO 5749:2004specifies the principal dimensions of diagonal cutting nippers and the test values for the nippers in order to verify their aptitude to function in conformity with ISO 5744:2004. General... | |
| ISO 5751-1:2010 gives guidelines for the design of, and specifies the designation and calculation of the dimensions for metric series motorcycle tyres. It is applicable to motorcycle tyres with a... | |
| ISO 5751-2:2010 specifies the tyre size designation, dimensions and load-carrying capacities of metric series motorcycle tyres. It is applicable to such tyres with a height-to-width ratio of 100 % and... | |
| ISO 5751-3:2010 specifies the approved rim contours for motorcycle rims on which metric series motorcycle tyres are mounted. | |
| ISO 5753-1:2009 specifies values of radial internal clearance for: - radial contact groove ball bearings, except those for insert bearings; - double-row self-aligning ball bearings; - cylindrical roller bearings; -... | |
| ISO 5753-2:2010 specifies values of axial internal clearance for four-point-contact ball bearings with contact angle of 35°. | |
| ISO 5755:2012 specifies the requirements for the chemical composition and the mechanical and physical properties of sintered metal materials used for bearings and structural parts. When selecting powder metallurgical (PM)... | |
| ISO 5758:2002 specifies the information to be included on the label and/or accompanying documents, for identifying the contents of containers for processed motion-picture film and magnetic sound records. It specifies... | |
| ISO 5764|IDF 108:2009 specifies a reference method for the determination of the freezing point of raw bovine milk, heat-treated whole, reduced fat and skimmed bovine milk, as well as raw... | |
| ISO 5765-1|IDF 79-1:2002 specifies an enzymatic method for the determination of the lactose content of all types of dried milk, of ice-mixes in dry form in the presence of other... | |
| ISO 5765-2|IDF 79-2:2002 specifies an enzymatic method for the determination of the lactose content of all types of dried milk, of ice-mixes in dry form in the presence of other... | |
| ISO 5771:2008 specifies the minimum requirements for rubber hoses used for transferring ammonia, in liquid or in gaseous form, at ambient temperatures from - 40 °C up to and including... | |
| ISO 5774:2006 specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from -10 °C to +60 °C. The four types... | |
| ISO 5794-1:2010 specifies methods of test for characterizing precipitated hydrated silica for use as a rubber compounding ingredient. A definition of precipitated hydrated silica is given. | |
| ISO 5794-3:2011 specifies the test formulation, equipment, procedure and test methods for determining the physical properties of precipitated hydrated silica in a compound based on a blend of solution styrene-butadiene... | |
| ISO 5797:2004 provides requirements for windows and side scuttles for fire-resistant constructions for installation in A class and B class divisions as defined in FTP Code, Part 3 (IMO Res. | |
| ISO 579:2013 specifies a method for determining the total moisture of coke. It can be used for the determination of moisture of blast-furnace coke, foundry coke and other high-temperature carbonization... | |
| ISO/TC 4 Rolling bearings | |
| ISO/TC 6 Paper, board and pulps | |
| Lays down a range of nominal values of external and spindle diameters, and gives information on the working performance requirements for steel guide rollers used with dyeing and finishing machinery. | |
| Lays down detailed specifications for the instrumentation and procedure to be used for acoustic sensitivity testing. Applies to accelerometers. Is applicable for a frequency range of random noise from 125... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for base strain sensitivity testing. Applies to rectilinear accelerometers, mainly of the piezoelectric type. Is applicable for the... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for fixed temperature sensitivity testing. Applies to rectilinear pick-ups. Is applicable for the following parameters: frequency range: 20... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for magnetic field sensitivity testing. Applies to all kinds of pick-ups, whereby the pick-up output due to applied... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for mounting torque sensitivity testing. Applies to pick-ups mounted by screws, bolts or other threaded fasteners. The change... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for primary calibration of accelerometers using centrifuge calibration. Applies to all types of rectilinear accelerometers, primary standards and... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for primary calibration of accelerometers using centrifuge calibration. Applies to rectilinear accelerometers with zero-frequency response, mainly of the... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for primary calibration of accelerometers using Earth's gravitation. Applies to rectilinear accelerometers with zero-frequency response, mainly of the... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for resonance frequency testing. It is a very limited method applicable exclusively to undamped accelerometers, mainly of the... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for transient temperature sensitivity testing. Applies to piezoelectric pick-ups, whereby pick-up output due to sudden temperature change is... | |
| Lays down detailed specifications for the instrumentation and procedure to be used for transverse shock sensitivity testing. Applies to rectilinear accelerometers of the strain gauge, piezoresistive and piezoelectric type. Is... | |
| Lays down detailed specifications for the instrumentation and procedures to be used for accelerometer resonance testing. Does apply to rectilinear accelerometers of the piezoresistive, piezoelectric and variable capacitance types in... | |
| Lays down dimensional characteristics and specifies the test pressure of the types of hydraulic tipping cylinders currentlyused on agricultural tippers, in order to provide a reasonable limited range from which... | |
| Lays down rules complementary to ISO 128 and ISO 129 for the simplified representation of bars and profile sections in assembly and detail drawings. | |
| Leather -- Bovine wet blue -- Specification | |
| Locked coil wire ropes for mine hoisting -- Technical delivery requirements | |
| Manganese ores -- Determination of combined water content -- Gravimetric method | |
| Meat and meat products -- Detection of polyphosphates | |
| Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration -- Part 1: General requirements | |
| Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration -- Part 2: Practical guidance for measurement at the workplace | |
| Mechanical vibration and shock -- Mechanical mounting of accelerometers | |
| Non-destructive testing -- Industrial X-ray and gamma-ray radiology -- Vocabulary | |
| Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules | |
| Non-destructive testing -- Ultrasonic inspection -- Vocabulary | |
| Oilseed residues -- Sampling | |
| Paper and board -- Determination of thickness, density and specific volume | |
| Paper and board -- Determination of water absorptiveness -- Cobb method | |
| Photography -- Industrial radiographic films (roll and sheet) and metal intensifying screens -- Dimensions | |
| Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites | |
| Pneumatic fluid power -- Compressed-air filters -- Part 1: Main characteristics to be included in suppliers' literature and product marking requirements | |
| Pneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature | |
| Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector | |
| Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector | |
| Prescribes quality of recorded signals, track layout and track format used on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad on one side so... | |
| Presents detailed principles to be applied to the design of programmes, techniques and the handling and preservation of samples of water. The main objectives are measurements of quality characterization, of... | |
| Principle: oxydation of a test portion in a Parr bomb under alkaline conditions to destroy organic matter and to solubilize the mineral matter. Formation of molybdosilicate complex and spectrometric measurement... | |
| Provides a format and recording technique for a 9-bit-coded magnetic tape of 12.7 mm (0.5 in) width for data interchange between information processing systems, communication systems and associated eqipment by... | |
| Provides basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied. In order that the measurements are made in the... | |
| Provides guidance on the design of sampling programmes and the choice of instrumentation and techniques for the sampling of the quality of wet deposition. Does not cover measurement of the... | |
| Provides guidance on the principles to be applied to the design of sampling programmes, sampling techniques and the handling and preservation of samples of sea water from tidal waters. Does... | |
| Provides guidance on the sampling of sediments from rivers, streams, lakes and similar standing waters and estuarines. Sampling of industrial and sewage works sludges and ocean sediments are excluded. | |
| Pulps -- Determination of drainability -- Part 1: Schopper-Riegler method | |
| Pulps -- Determination of drainability -- Part 2: "Canadian Standard" freeness method | |
| Reaction of a solution of iodine, sulphur dioxide, pyridine and 2-methoxyethanol with the water contained in the product dispersed previously in a mixture of methanol and formamide. The method described... | |
| Reaction to fire tests -- Ignitability of building products using a radiant heat source | |
| Reaction to fire tests -- Spread of flame -- Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen | |
| Recommends procedures and equipment for sampling water and steam in boiler plants including examples of sampling apparatus, to provide samples for physical and chemical analysis that are representative of the... | |
| Refers to ferrochromium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to ferromanganese usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to ferromolybdenum usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to ferroniobium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to ferrosilicochromium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to ferrosilicomanganese usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to ferrosilicon usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. An annex recommends minimum dimensions of openings for feeding systems. | |
| Refers to ferrotitanium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to ferrotungsten usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to ferrovanadium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. | |
| Refers to safety devices used downstream of cylinder or pipeline outlet regulators and of pipeline outlet valves, and upstream of blowpipes. Does not specify location and combination of these devices... | |
| Refractory bricks for use in rotary kilns -- Dimensions | |
| Relates to products boiling below 200 °C. Directly applicable to contents of 0.1 mg/kg to 30 mg/kg. Higher contents may be determined by a suitable dilution of the sample. Alkylsulphones,... | |
| Replaces the equation in subclause 10.3. | |
| Resistance spot welding -- Electrode adaptors, male taper 1:10 -- Part 2: Parallel shank fixing for end-thrust electrodes | |
| Resistance welding equipment -- Electrode adaptors, male taper 1:10 -- Part 1: Conical fixing, taper 1:10 | |
| Rolling bearings -- Vocabulary | |
| Rubber compounding ingredients -- Natural calcium carbonate -- Test methods | |
| Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 2: Evaluation procedures in styrene-butadiene rubber | |
| Rubber hoses and hose assemblies for measured fuel dispensing -- Specification | |
| Rubber- or plastics-coated fabrics -- Determination of abrasion resistance -- Part 1: Taber abrader | |
| Ships and marine technology -- Small weathertight steel hatches | |
| Solid fertilizers -- Method of checking the performance of mechanical devices for sampling of product moving in bulk | |
| Specfies basic requirements for apperatus and general operating procedures for determining the air permeance of paper and board in the medium air permeance range, and is applicable to papers and... | |
| Special tolerances for reamers | |
| Specifies a laboratory performance test method for power assembly tools for installing threaded fasteners. Gives instructions on what to test for and how to evaluate and present the test data. | |
| Specifies a method by dry heat treatment at 105 °C. Is not applicable to certain high purity papers such as are used for insulation in electrical equipment for which ISO... | |
| Specifies a method for determining titanium dioxide content in all kinds of paper and board, in particular coated or filled products. It comprises two procedures for the final determination of... | |
| Specifies a method of bench brakes their control devices in order to dertermine their suitability for use on trailed vehicles. Applies to assisted mechanical braking devices, using either compressed air... | |
| Specifies a method of testing potato planters to obtain comparable and reproducible measurements with regard to uniform placement of tubers and other aspects of performance of the machine. Applies to... | |
| Specifies a method, the principle of which is based on evaporation of a test portion under specified conditions, using special apparatus, and weighing of the residue after evaporation. Details the... | |
| Specifies a procedure for moist heat treatment of paper or board. This method concerns printing and writing papers, but may be used with discretion for other types of paper and... | |
| Specifies a procedure for the determination of trivalent negative nitrogen. Organic nitrogen in the form of azide, azine, azo, hydrazone, nitrite, nitro, nitroso, oxime or semicarbazone is not determined quantitatively. | |
| Specifies a set of 42 graphic characters with their coded representations. Consists of a code table and a legend showing each graphic, its use, and its name. Explanatory notes are... | |
| Specifies a set of 70 graphic characters. Consists of a code table and a legend with explanatory notes containing each graphic, its use and its name. The character set is... | |
| Specifies a test method for determining the reflectance of rear view mirrors. Applies to flat and convex surface mirrors intended for internal and external mounting. Describes the apparatus and the... | |
| Specifies a test method for fertilizer distributors in lines, including distributors attached to a basic machine. Equipment designed for distributing microgranular pesticides or herbicides is excluded. Annex A tabulates a... | |
| Specifies a testing method for assessing the influence of the various parameters which can influence brazing during manufacture as a function of clearances. The test piece described gives guidance about... | |
| Specifies basic requirements. Does not apply to machines which: a) primarily depend on electric or electronic means for control or proper functioning; b) only deliver gas to the breathing system... | |
| Specifies certain requirements for design, construction and performance of refrigerated tanks and the related of test. It does not deal with electrical safety regulations. Applies to refrigerated tanks with automatic... | |
| Specifies dimensions and tolerances. Applies only to straight spot welding electrodes, where the electrode force Fmax given for diameter d1 in the table is not exceeded and where the centre... | |
| Specifies dimensions, materials, quality of manufacture and finish for guardrails and stanchions which are fitted on exposed freeboard and superstructure decks of cargo ships. Does not apply for guardrails which... | |
| Specifies flange dimensions, driving component dimensions, and reference values for torque and thrust for flanges. This first edition cancels and replaces ISO 5210-1:1977, ISO 5210-2:1979 and ISO 5210-3:1982. Annex A... | |
| Specifies four intermediate measures due to changes in observation conditions (time, calibration, operator and equipment) within a laboratory. These intermediate measures can be established by an experiment within a specific... | |
| Specifies general conditions relating to the sampling for the assessment of quality of oilseeds purchased as industrial raw materials. Nine figures show exemples of suitable apparatus. There is specified the... | |
| Specifies general dimensions of type A cartridges for indexable inserts and preferred cartridges. Cancels and replaces the second edition, which has been technically revised. | |
| Specifies geometrical tests on these general purpose and normal accuracy mechanical dividing heads, and gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy... | |
| Specifies interchangeability dimensions for agricultural disks of the same type and nominal size, classified as types A, B, and C. Applies to disks as working parts of ploughs, harrows, and... | |
| Specifies mandatory and optional markings of general purpose valves and states the manner of applying the markings, i.e. on the body, on a flange, or on a identification plate. Markings... | |
| Specifies manufacture, dimensions, tolerances and the inspection and delivery conditions and marking. The common and special shapes are shown in figures. Applies to blocks used for paving covered (indoor) and... | |
| Specifies method of measuring the performance of service braken, based on measured deceleration and on measured stopping distance, and of parking brakes of vehicles. Applies to: tractors and self-propelled vehicles... | |
| Specifies requirements and the method of test for accomodation ladders used on merchant ships (excluding passenger ships). The requirements are applicable to either single-flight or multi-flight ladders. | |
| Specifies requirements for dehydrated onion (Allium cepa L.) and gives recommendations relating to microbiological requirements includingly to transport and storage. Cancels and replaces the second edition, which has been technically... | |
| Specifies requirements for test sieves for the laboratory determination of foreign matter in a sample of cereals. Does not apply to test sieves for testing cereals for insect infestation. Cancels... | |
| Specifies requirements for the characteristics, dimensions, methods of installation and safety of closed- circuit conveyors. Applies to evacuation devices fitted with scrapers, moving continuously in a closed circuit, inteded to... | |
| Specifies requirements for two grades. Grade 1 (synthesis grade) is a high quality grade normally required only for the use as a chemical feedstock. Grade 2 (ordinary grade) is suitable... | |
| Specifies requirements, physical properties and marking. Gives the measurement of thickness (Annex A), the resistance to flexing of the upper material (Annex B), the flexing test of soling material (Annex... | |
| Specifies rhe dimensions, tolerances and generally used grades of stainless steel for bends /type 3D (90 and 180 ) with and without straight ends and type 5D (90 )/, concentric... | |
| Specifies rim dimensions for bicycle tyres; gives only those rim contour dimensions necessary for tyre mounting and to fit the tyre on the rim. | |
| Specifies symbols for proofreading such as of manuscripts, typescripts and printer's proofs. Does not apply to symbols of graphic art such as used in photo-engraving plants. Symbols for the correction... | |
| Specifies technical test methods for grape presses; applies to continuous and discontinuous presses. Annex A contains an example of overall evaluation; annex B gives the inspection sheet for the press; | |
| Specifies technical test methods for machines designed for carrying out all operation involved in grape-harvesting. Applies in cases where the grapes are used for wine making or making other beverages... | |
| Specifies the allowable positioning of windows according to ISO 1751, applicable for passenger and cargo ships. Annexes give a formula for calculation of design pressure and present simplified graphs for... | |
| Specifies the allowable positioning of windows according to ISO 3903, applicable for passenger and cargo ships. Annexes give a formula for calculation of design pressure and present simplified graphs for... | |
| Specifies the characteristics of the towing anchorages mounted on road vehicles, allowing them to be towed or to tow another vehicle. Applies to passenger cars as defined in ISO 3833... | |
| Specifies the coatings suitable for protecting surfaces of steel pipes and fittings, either individually or after assembly, and also the conditions for the application of such protective coatings. Applies to... | |
| Specifies the conditions for determining the tensile properties of plastics films or sheets less than 1 mm thick, based upon the general principles given in part 1. Cancels and replaces... | |
| Specifies the conditions for interchangeability, and the operating characteristics and lays down the technical specifications for tests, for the hydrauic couplings on braking systems for towed machinery. Applies solely to... | |
| Specifies the conventions to be used in numbering reference stations, waterlines, structural frames, transverse bulkheads, decks, compartments (holds, 'tween decks, tanks), hatchways, masts and cargo-handling equipment where reference numbers are... | |
| Specifies the dimensional requirements for attaching wheels to hubs on tractors and machinery for agriculture and forestry. Specifications indicated do not imply that the wheel is interchangeable from one vehicle... | |
| Specifies the dimensions for positive drive of external and internal Morse tapers in accordance with ISO 296. | |
| Specifies the dimensions for two-way valves. Each basic series of these dimensions may be used as required with flanges of mating dimensions conforming to ISO 2084 or ISO 2229. The... | |
| Specifies the dimensions of an unnotched impact test piece of sintered metal materials. The test piece may be obtained directly by pressing and sintering or by machining a sintered part. | |
| Specifies the general design characteristics of mud boxes used between pumps and bilge suctions in machinery spaces and tunnels for the coarse filtration of bilge water. Applies to deep sea... | |
| Specifies the general dimensions: length of thread (maximum), overall length, shank diameter and dimensions of driving square, dimensions of the connecting portion between the shank and threaded part. Applies to... | |
| Specifies the general requirements, the composition and the designation of the complete drinking water filling connection aboard ships for attachment of piping from another ship or from a land distribution... | |
| Specifies the main dimensions and clearance zones for harrow and cultivator S-tines, type 0 to 3. | |
| Specifies the main dimensions and corresponding tolerances and gives a method to measure the lengths of belts. | |
| Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing... | |
| Specifies the main interchangeability dimensions for compensator and articulated hydraulic cylinders of activating mechanically controlled brakes fixed to the axles of trailers and trailed equipment. Figuers 1 to 5 illustrate... | |
| Specifies the main manufacturing dimensions and also the corresponding openings to be provided in bulkheads and decks. Concerns exclusively those pieces fabricated and attached by welding, to be used with... | |
| Specifies the majority of tolerances on dimensions used by ISO/TC 5/SC 1 in drawing up International Standards concerning steel tubes. Is intended for use as a basic document by all... | |
| Specifies the maximum admissible height and width dimension for machines which are engaged in mechanical loading procedures. Represents a recommendation for thr production of hoisting devices, transporters and stores for... | |
| Specifies the methods for measuring the characteristics peculiar to the control such as accuracy and repeatability. Also lays down the numerical values of the integral of time of the object... | |
| Specifies the methods for the determination of folding endurance of paper using Köhler-Molin, Lhomargy, MIT and Schopper testers. The principle of the methods is folding backwards and forwards in a... | |
| Specifies the principal dimensions of lever assisted side cutting pliers and end and diagonal cutting nippers, as well as the test values for the pliers and nippers according to ISO... | |
| Specifies the reference method. It consists in boiling of a test portion with water. | |
| Specifies the requirements for a range of sprocket assemblies for use in twin outboard chain assemblies. These assemblies incorporate sprocket rings designed to accept chains complying with ISO 610, shackle... | |
| Specifies the requirements for dimensional compatibility of harvesting machines and transport vehicles necessary to ensure satisfactory operation. Dimensions specified pertain to forage harvesters, forage trailers, dump boxes and forage conveyors... | |
| Specifies the technical details of the components of the drinking water filling connection aboard ships for attachment of piping from another ship or from a land distribution system and lays... | |
| Specifies the technical requirements and main dimensions. Is not applicable to indoor stairs, outboard stairs, emergency and special purpose stairs. | |
| Specifies the test method for volume/hectare adjustment systems of sprayers in order to assess precision of spraying and performance. Suitable for agricultural hydraulic pressure sprayers used for protection and/or fertilization... | |
| Specifies the values of normal modules for straight and helical gears for general engineering and for heavy engineering. Replaces the first edition. | |
| Specifies three atmospheres approximated to the natural environmental conditions. However, it is desirable to use only one of these. | |
| Specifies two methods for determining a single numerical value of a given sound, the first method is based on physical measurements, such as spectrum analyses in octave bands, the second... | |
| Specifies two methods for dry fertilizers only: the machine-tapping method and the hand-tapping method. Its principle is pouring the fertilizer from a specified funnel into a specified measuring cylinder of... | |
| States a method and the device for use in determining the position of the seat index point (SIP) for any kind of seat designed for earth-moving machinery as defined in... | |
| Statistical interpretation of data -- Tests for departure from the normal distribution | |
| Suitable for winding yarns and similar products (for example, tape yarns, roving, sliver) onto tubes or other formers. It may be applied to spinning, twisting and winding machinery as well... | |
| Synchronous belt drives -- Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH -- Metric and inch dimensions | |
| Synchronous belt drives -- Vocabulary | |
| TC 10 Technical product documentation // SC 1 | |
| TC 121 Anaesthetic and respiratory equipment // SC 1 | |
| TC 121 Anaesthetic and respiratory equipment // SC 2 | |
| TC 131 Fluid power systems // SC 5 | |
| TC 31 Tyres, rims and valves // SC 10 | |
| TC 44 Welding and allied processes // SC 5 | |
| TC 44 Welding and allied processes // SC 8 | |
| TC 6 Paper, board and pulps // SC 2 | |
| TC 61 Plastics // SC 11 | |
| TC 61 Plastics // SC 2 | |
| TC 69 Applications of statistical methods // SC 6 | |
| TC 72 Textile machinery and accessories // SC 3 | |
| Technical drawings -- Projection methods -- Part 1: Synopsis | |
| Technical drawings -- Projection methods -- Part 2: Orthographic representations | |
| Technical drawings -- Projection methods -- Part 3: Axonometric representations | |
| Technical drawings -- Projection methods -- Part 4: Central projection | |
| Technical product documentation -- Sizes and layout of drawing sheets | |
| Technical specifications for centrifugal pumps -- Class II | |
| The determination of free sulphur dioxide consists in direkt iodometric titration of the product at a pH between 0,7 and 1, followed by blank titration of the product, freed from... | |
| The dimensions of 90 shuttles for automatic pirn changing as used in the textile industry are specified. The dimensions are described with aid of a figure and specified in a... | |
| The dimensions of paper patterns for dobbies for use in the textile industry are specified. The dimensions are shown in a figure, and the values of the dimensions are contained... | |
| The dimensions of ratings up to and including 35 A circuit breakers shall not exceed those shown in figure 1. The dimensions of the part projecting through the mounting panel... | |
| The figures included illustrate the characteristics of the various packages and are not to scale. All packages are shown with their longitudinal axes in a horizontal position, irrespective of their... | |
| The function of illuminators is to allow the viewing of radiographs. The illuminator system shall guarantee the same safety of personnel as an electric apparatus concerning maximum voltage, insulation and... | |
| The guidance includes conditions of harvesting and putting into store, and optimum conditions such as covering, temperature, relative humidity, cooling of the clamp and keeping period, further complementary methods of... | |
| The main dimensions and the co-ordination of cited heald carrying rods are specified. The length of end loops and the width of end loops of flat steel healds of twin... | |
| The method allows inadequate cookingof the products to be detected. It applies to products having a urease activity of less than 1 mg of nitrogen per gram of product as... | |
| The method allows the detection and identification of the following antioxidants: nordihydroguaretic acid, propylgallate, octylgallate, dodecylgallate, tertiobutylhydroquin one, butylhydroxyanisole, alpha-tocopherol, butylhydroxytoluene. The method consists in dissolving of a test portion... | |
| The method consists in acidifying and heating a test portion, entraining, in a current of nitrogen, the gas liberated, absorbing and oxidizing the gas by bubbling it through a neutral,... | |
| The method consists in boiling with sulphuric acid solution (after any necessary grinding and defatting), and separation and washing of the insoluble residue. Boiling this residue with sodium hydroxide solution,... | |
| The method consists in decomposing the organic matter, followed by reduction of trivalent iron by hydroxyammonium chloride, forming, in a buffered medium, of the stable iron(II)/1,10 phenanthroline complex, and photometric... | |
| The method consists in dissolving in water of the phosphorus(V) oxide in a test portion by shaking, using a rotary shaker under specified conditions. | |
| The method consists in distilling of the ammonia from an alkaline solution, absorbing in an excess of standard volumetric sulphuric acid solution and back-titrating with standard volumetric sodium hydroxide solution. | |
| The method consists in heating a test portion until all organic matter is decomposed and a clear solution is obtained, either with sulphuric acid and nitric acid and in certain... | |
| The method consists in heating a test portion with ethanolic potassium hydroxide solution until the meat components are totally dissolved, decanting, washing of the remaining residue with hot ethanol, filtering,... | |
| The method consists in hydrolysing with hydrochloric acid of a ground test portion, dollowed by separation of the total lysine by column chromatography and determination by spectrometry at 570 nm. | |
| The method consists in macerating of a test portion in aqueous medium, distillation of the sulphur compounds, and argentimetric titration of the distillate in nitric acid medium. A figure shows... | |
| The method consists in reducing of nitrate to ammonia by chromium powder in acid medium, converting of organic and urea nitrogen into ammonium sulfate by digestion with concentrated sulfuric acid... | |
| The method determines air permeance in the medium range. It is applicable to papers and boards having air permeance between 0,35 µm/(Pa·s) und 15 µm/(Pa·s). It is unsuitable for rough... | |
| The method is applicable particularly to diaphragm material cut from coated fabrics. The coated fabric is subjected to a controlled load application over a known area. Dimensions of the test... | |
| The method is applicable to products having contents of 2 mg or more per kilogram. It consists in acidification of a test portion and decolourizing by the liberated gas of... | |
| The method is applicable to products having thorium contents between 0,2 and 5,0 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. | |
| The method is applicable to products having zinc contents between 0,002 and 6 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. | |
| The principle consists in decomposition of a test portion by Kjeldahl method, distillation of the ammonia liberated, determination of the nitrogen content by titration of the ammonia with sulfuric or... | |
| The principle of the method is grinding of the laboratory sample, with or without preliminary breaking, crushing, grinding or drying, division of the sample by suitable means, taking care that... | |
| The purpose is to give some indications of the way in which accuracy data can be used in various practical situations by: giving a standard method of calculating the repeatability... | |
| The purpose is to outline the general principles to be understood when assessing accuracy (trueness and precision) of measurement methods and results, and in applications, and to establish practical estimations... | |
| The result of the method is a measure for the porosity of the material. The method is applicable to substances which do not contain materials soluble in gas oil and... | |
| The specified method is used for determining the pyrometric cone equivalent (refractoriness) of siliceous, low alumina fireclay and fireclay refractory materials and products. Its usefull range of application depends on... | |
| The symbols have been selected in accordance with the following principles: a) the plants should be widely used; b) the symbols should be easy to draw and readily be distinguishable... | |
| This part defines graphical symbols for binary logic and gives some rules concerning their use in circuit diagrams. Symbols given in this part shall be used for all documents and... | |
| This part defines graphical symbols for sequencers and gives some rules concerning their use in circuit diagrams. Symbols given in this part shall be used for all documents and circuit... | |
| This part of ISO 5247 defines the basic terms for accessories of weaving machines. These terms are subdivided into five categories (see figure 1) as follows: shed-forming devices; parts for... | |
| This part specifies rules for the use of symbols in basic logic systems needed for better understanding of pipe connections. This system may be used to define functions as well... | |
| This seciond cancels and replaces the first edition (1982). Specifies a test method for distribution of solid fertilizers. Equiment designed for distributing microgranular pesticides or herbicides ist excluded. Tabulates a... | |
| This second edition cancels and replaces the first edition (1981). Establishes formulae for the calculation of power synchronous belts on two pulley drives. The numerical values of certain parameters used... | |
| This second edition cancels and replaces the first edition (1981). Specifies practical and mathematical methods of determining the masking effects of obstruction on the angles of vision forward, to the... | |
| This second edition cancels and replaces the first edition (1983). Contains terms in English (in American, if different), French, German, Italian, Spanish, and Russian. The terms are listed in the... | |
| This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of scraper bars for use in twin outboard chain assemblies made from chains complying... | |
| This second edition cancels and replaces the first edition (i.e. ISO 548-1975). Should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sample, procedure and expression of results. | |
| This second edition cancels and replaces the first edition (ISO 559:1977). Specifies the technical conditions for delivery of seamless and welded steel tubes for the conveyance of water and sewage... | |
| Titration of a prescribed volume of mixed Fehling's solution with a solution of a test portion under specified conditions, using methylene blue as internal indicator. An informative annex provides a... | |
| To accommodate some freedom in design and use of materials, the dimensions of the cone-shaped tip of the plug pin and the protruding length of socket insulation and outside contact... | |
| Tomatoes -- Guide to cold storage and refrigerated transport | |
| Under normal conditions of use, it does not apply to oilseeds which do not yield oil which is completely liquid at 20 °C (e.g. shea, palm, illipe, cocoa, etc.). The... | |
| Vanilla [Vanilla fragrans (Salisbury) Ames] -- Part 1: Specification | |
| Vanilla [Vanilla fragrans (Salisbury) Ames] -- Part 2: Test methods | |
| Water quality -- Sampling -- Part 14: Guidance on quality assurance of environmental water sampling and handling | |
| Water quality -- Sampling -- Part 16: Guidance on biotesting of samples | |
| Wheat flour -- Physical characteristics of doughs -- Part 2: Determination of rheological properties using an extensograph |
| << Prev | Next >> |