Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
800
820
830
840
850
860
870
871
872
873
874
875
876
877
878
879
880
881
882
883
890
900
910
920
930
940
950
1000
1050
1100
1150
1200
1500
1620
| Product Name | Notes |
|---|---|
| A basis for the revision of scales for sanitary accomodation in schools | |
| A NEMA White Paper on Emerging Technologies and the Industrial Internet of Things and Their Applications | |
| A new method for predicting energy saving from on/off photoelectric controls | |
| A review of gale damage to buildings in the UK | |
| Accidents involving glass in domestic doors and windows: some implications for design | |
| Achieving cost effective responsive maintenance | |
| Acoustic Insulation Systems Electronic Entry Data Sheet | |
| Acoustic Insulation Systems\x96Materials and Installation Requirements | |
| Advanced technologies for 21st century building services | |
| Airborne verification of antenna patterns of broadcasting stations | |
| Airtightness in UK dwellings | |
| Alkali-activated binders for precast and ready-mixed concrete products New supply chains, business models and environmental benefits | |
| Ammonia refrigerant in buildings: minimising the hazards | |
| An introduction to building with Structural Insulated Panels (SIPs) | |
| AN INTRODUCTION TO INTELLIGENT BUILDINGS Benefits and technology | |
| An Introduction to Intelligent Buildings Legislation, planning and design | |
| AN INTRODUCTION TO PASSIVHAUS A guide for UK application | |
| An Introduction to Radiation Protection | |
| AN INTRODUCTION TO THE USE OF FIRE MODELLING | |
| Assessing carbonation depth in ageing high alumina cement concrete | |
| Assessing condensation risk and heat loss at thermal bridges around openings | |
| Assessing the effects of thermal bridging at junctions and around openings | |
| Assessing the life hazard from burning sandwich panels | |
| Assessing the performance of timber frame wall panels subject to racking loads | |
| Assessing the risk of sulfate attack on concrete in the ground | |
| ASSESSING THE SUSTAINABILITY OF OFFICE REFURBISHMENT WITH BREEAM A case study | |
| Assessment of emergency wayfinding lighting systems in smoke | |
| Assisted means of escape of disabled people from fires in tall buildings | |
| Australian Interim Grading Rules for Milled Radiata Pine Flooring | |
| Australian Interim Grading Rules for Milled Radiata Pine Weatherboards | |
| Australian Interim Grading Rules for Sawn Timber from Radiata Pine | |
| Australian Interim Gradings for Radiata Pine Mouldings | |
| Australian Interim Rules for Milled Radiata Pine Lining | |
| Australian Interim Standard for Piles (Eastern Australian hardwoods) | |
| AVAILABILITY OF COMMUNICATIONS CIRCUITS IN THE MARITIME MOBILE-SATELLITE SERVICE | |
| Average daylighting factor: a simple basis for daylight design | |
| Avoiding latent mortar defects in masonry | |
| BIODIVERSITY OFFSETING FOR DEVELOPMENTS | |
| Blastfurnace slag and steel slag: their use as aggregates | |
| Blocks with recycled aggregates: beam-and-block floors | |
| BRE Screed tester: classifications of screeds, sampling and acceptance limits | |
| BREDEM: The BRE Domestic Energy Model | |
| BREVAC: A mechanised method of emptying sanitation chambers | |
| Bridging the performance gap Understanding predicted and actual energy use of buildings | |
| British Standard BS 5821:1980: Ratings of the sound insulation of floating party floors | |
| Building management systems: user experiences | |
| Building with confidence using renewable materials | |
| BUILDING-INTEGRATED PHOTOVOLTAIC SYSTEMS Challenges and opportunities for manufacturers and specifiers | |
| Cast iron sluice valves for waterworks purposes | |
| Cement-bonded particleboard | |
| Cleaning exterior masonry; Assessing cleaning of a brick-built church | |
| Code of recommended practice for the disposal of domestic sullage | |
| Cold Insulation Installation Details | |
| Compatibility between the broadcasting service in the band of about 87-108 MHz and the aeronautical services in the band 108-136 MHz | |
| Concrete with minimal or no primary aggregate content; The MAGCON pilot study | |
| Concretes with high ggbs contents for use in hard/firm secant piling | |
| Control of biological growths on stone | |
| Control of solar shading | |
| Controlling mould growth by using fungicidal paints | |
| COOL ROOFS AND THEIR APPLICATION IN THE UK | |
| Corrosion of steel wall ties: history of occurrence, background and treatment | |
| Corrosion of steel wall ties: recognition and inspection | |
| Corrosion-protected and corrosion-resistant reinforcement in concrete | |
| Cost and performance of solar water-heating systems in the UK | |
| Crates, Fully Sheathed, up to 3,000 lb. | |
| Crates, Open or Sheathed, up to 1,000lb. | |
| CREATING A FUNDING MECHANISM FOR UK CARBON REDUCTION PROJECTS | |
| Critical materials and material security in the construction industry and its supply chains | |
| CROSS-LAMINATED TIMBER An introduction to low-impact building materials | |
| Cypermethrin: a new insecticide for wood preservation | |
| Daylighting design for display screen equipment | |
| Daylighting requirements for display-screen equipment | |
| Dealing with poor sound insulation between new dwellings | |
| Defects in local authority housing: results of building problems survey | |
| Definitions of Software Defined Radio (SDR) and Cognitive Radio System (CRS) | |
| Delayed ettringite formation: in-situ concrete | |
| Delivering energy efficiency in commercial buildings A guide for facilities managers | |
| Delivering waste efficiency in commercial buildings | |
| Depth factor adjustments in the determination of characteristic bending stresses for visually stress graded timber | |
| Design of masonry walls subjected to concentrated vertical loads | |
| Design stresses for timber; background to BS 5268:Part 2 | |
| DESIGNING URBAN STREETS TO MINIMISE HEAT ISLAND EFFECTS Understanding wind-driven convective heat transfer from the surfaces of inner-city buildings and streets | |
| Deterioration due to corrosion in reinforced concrete | |
| Determination of the interference potential, and its possible reduction by mitigation techniques, between earth stations in the fixed-satellite service operating with non-geostationary satellites and stations in the fixed service in... | |
| District heating combined with electricity generation: cost-effectiveness factors | |
| Domestic energy use and carbon emissions: scenarios to 2050 | |
| Domestic mechanical ventilation: guidelines for designers and installers | |
| Domestic warm-air heating systems using low-grade heat sources | |
| Drainage design for buildings with reduced water use | |
| Durability of timber in ground contact | |
| Durability studies of pfa concrete structures | |
| Ecolabelling of building materials and building products | |
| ECONOMIC ASPECTS OF SPECTRUM MANAGEMENT | |
| Effects of alkali-silica reaction on concrete foundations | |
| Electromagnetic compatibility of building services: towards a European standard | |
| Electronic Entry Data Sheet for Acoustic Insulation Systems | |
| Electronic Entry Data Sheets for Cold Service Insulation Materials | |
| Electronic tagging and wireless technologies; Part 1. Application in the construction industry | |
| Electronic tagging and wireless technologies; Part 2. An overview | |
| Electronic tagging and wireless technologies | |
| Emergency wayfinding lighting systems in smoke | |
| Emergency wayfinding lighting systems | |
| Emulsion-based formulation for remedial treatments against woodworm | |
| Enamel, exterior, finishing (Gloss and semi-gloss) | |
| Enamel, Exterior, Finishing, Stoving (Gloss and Semi Gloss) | |
| Enamel, Exterior, Matt, Finishing, Heat-Resisting | |
| Enamel, Interior, General Purpose, Stoving | |
| Enamel, Interior, General Purpose | |
| Enamel, interior, gloss heat resisting(200 C) | |
| Enamel, Interior, Gloss, Heat-Resisting (200 degrees celcius) stoving | |
| Energy audits and surveys | |
| Energy consumption in public and commercial buildings | |
| Energy efficiency in new housing | |
| Energy use by office equipment: reducing long-term running costs | |
| Energy-efficient factories: design and performance | |
| Energy-efficient rehabilitation of pre-1919 housing | |
| Environmental benchmarking for property portfolio managers | |
| Environmental sustainability in bridge management | |
| European concreting practice: Italy | |
| European concreting practice: Sweden | |
| European Standards for wood preservatives and treated wood | |
| Factory-applied priming paints for exterior joinery | |
| Falls from domestic balconies | |
| Falls from domestic windows | |
| False alarms from automatic fire detection systems | |
| Fibre reinforced polymers in construction: durability | |
| Fibre reinforced polymers in construction: predicting weathering | |
| Financial benefits of energy efficiency to housing landlords | |
| Fire spread between caravans | |
| Five-storey timber-frame hall of residence; A reconstruction case study | |
| Flexible electrical networks for a low carbon future Network and built environment opportunities for enabling smarter networks | |
| Flooring, paving and setts \x96 requirements for safety in use | |
| Fundamental design examples of digital ship earth stations | |
| FUNDING RENEWABLE ENERGY PROJECTS An introduction to the Feed-In Tariff and Renewable Heat Incentive schemes and associated funding options | |
| GENERAL CONSIDERATIONS RELATIVE TO HARMFUL INTERFERENCE FROM THE VIEWPOINT OF THE AERONAUTICAL MOBILE SERVICES AND THE AERONAUTICAL RADIONAVIGATION SERVICE | |
| GENERAL METHODS OF MEASURING THE FIELD STRENGTH AND RELATED PARAMETERS | |
| Green buildings revisited | |
| Green gluing of timber: a feasibility study | |
| Greener homes for Redbridge | |
| GROUND SOURCE HEAT PUMPS AND LOW-TEMPERATURE SYSTEMS Key factors for successful installations | |
| Grumixava (Micropholis gardnerianum) | |
| Guidance on the regulatory framework for national spectrum management | |
| Hard-water scale in hot water storage cylinders | |
| Heat losses through windows | |
| HEMP LIME An introduction to low-impact building materials | |
| High-tech mixed-use buildings: attitudes to energy efficiency | |
| Hospitals in the best light; An introduction to hospital lighting | |
| Hot air repair of PVC-U profiles | |
| Hot Insulation Installation Details | |
| Hot Service Insulation Materials and Installation Electronic Entry Data Forms | |
| Hot Service Insulation Materials and Installation Specification | |
| House longhorn beetle survey | |
| Housing Code of Recommended Practice (Interim Series), for the Fixing of Concrete Interlocking Roofing Tiles (Without Weathering Check) | |
| Housing Specification (Interim Series) for Bathroom Cabinets | |
| Housing Specification (Interim Series) for Concrete Interlocking Roofing Tiles (Without Weathering Check) | |
| Housing Specification (Interim Series) for Flat-Back Basins Cast Iron and Stamped Steel (Acid-Resisting Porcelain Enamelled) and Pottery Ware | |
| Housing Specification (Interim Series) for Gypsum Plaster, Hemi-hydrate Type for use in the Manufacture and Fixing of Fibrous Plaster Products | |
| Housing Specification (Interim Series) for High-Level Sanitary Flushing Cisterns | |
| Housing Specification (Interim Series) for Hinges for Residences | |
| Housing Specification (Interim Series) for Locks for Household Doors | |
| Housing Specification (Interim Series) for Precast Concrete Masonry Units | |
| Housing Specification (Interim Series) for Sand-Lime (Calcium Silicate) Bricks | |
| Housing Specification (Interim Series) for Timber Clothes-Line Posts | |
| Housing specification (Interim Series) for wood windows of double hung and casement types | |
| Identification of components in circuit diagrams of telecommunication equipment | |
| Impact of emissions from short-range devices on radiocommunication services | |
| Impact of horizontal shading devices on peak solar gains through windows | |
| Impact of industrial, scientific and medical (ISM) equipment on radiocommunication services | |
| Impact of power line telecommunication systems on radiocommunication systems operating in the LF, MF, HF and VHF bands below 80 MHz | |
| In Tents Magazine Buyer's Guide | |
| In-situ treatment of exterior joinery using boron-based implants | |
| Incising UK-grown Sitka spruce | |
| Information Security Risk Management for ISO27001/ISO27002 | |
| Inhalation Aerosols: Physical and Biological Basis for Therapy | |
| Injection Molding of Metals and Ceramics | |
| Innovation in concrete frame construction | |
| INNOVATION IN TIMBER SUPPLY AT THE LONDON 2012 OLYMPIC AND PARALYMPIC GAMES | |
| Inspecting steel-framed houses | |
| Inspection and maintenance of flat and low-pitched timber roofs | |
| Inspection of radio stations | |
| Installation Manual for Food Service Equipment | |
| Installation of Cold Service Insulation Systems | |
| Installation of Flexible, Removable/Reusable Insulation Covers for Hot Insulation Service Electronic Entry Data Forms | |
| Installation of Flexible, Removable/Reusable Insulation Covers for Hot Insulation Service | |
| Installation of Hot Service Insulation Systems | |
| INSTRUMENT AND AUTOMATION ENGINEERS' HANDBOOK: PROCESS MEASUREMENT AND ANALYSIS VOLUME I: MEASUREMENT AND SAFETY - VOLUME II: ANALYSIS AND ANALYZERS | |
| Insulation Document Use Guideline | |
| Insulation Inspection Checklist | |
| Insulation Inspection Electronic Entry Checklist Data Form | |
| Intelligent Document Capture with Ephesoft | |
| Interchangeability: What it Means | |
| Interim Definitions for Unit Load Method of Materials Handling | |
| Interim Grading Rules for Rough Sawn Eastern Australian Brushwoods | |
| Interim Grading Rules for Rough Sawn Eastern Australian Hardwoods | |
| Interim Grading Rules for Rough Sawn South Eastern Australian Hardwoods | |
| Interim grading rules for sawn radiata pine for structural engineering applications | |
| Interim Grading Rules for Sawn Radiata Pine for Use as Light Framing Material | |
| Interim packaging code for service stores | |
| Interim Report on the Underwater Treatment of Wooden and Steel Vessels | |
| Interim Series for Glazed sanitary pedestal pans of the washdown type | |
| Interim Specification (Housing Series) for Kitchen Fitments Manufactured from Wood | |
| Interim Specification (Housing Series) for Wooden Door Frames and Door Jamb Linings | |
| Interim Specification (Housing Series) for Wooden Doors | |
| Interim Specification for Adhesive Tapes for the Packing and Protection of Service Equipment | |
| Interim Specification for Adhesives for Fruit Case Labels | |
| Interim Specification for Aluminium Pigmented Wood Primer | |
| Interim Specification for Application of Hard-Setting Plastic Compositions (chemical hardening type) to the Bottoms of Wodden Ships | |
| Interim Specification for Artifical Lighting of Dwellings | |
| Interim Specification for Bituminous Damp-Proof Courses with Fibre Felt Base | |
| Interim Specification for Bituminous Damp-Proof Courses with Metal Centre | |
| Interim Specification for Burnt Clay and Shale Building Bricks | |
| Interim Specification for Cases, Wood, Nailed | |
| Interim Specification for Cases, Wood, Stitched Wire | |
| Interim Specification for Compounds, Dip Sealing for the Packing and Protection of Service Equipment | |
| Interim Specification for Copper-Oxide Rectifiers, Instrument Type | |
| Interim Specification for Crates, Steel Fabric | |
| Interim Specification for Enamel, Exterior, Marine, Finishing | |
| Interim specification for enamel, exterior, matt, finishing, stoving | |
| Interim specification for enamel, exterior, matt, finishing | |
| Interim Specification for Exterior Oil Gloss Paint for General Use | |
| Interim Specification for Hardwood Flooring New South Wales Timbers (Three-Inch and Four-Inch Nominal Widths) | |
| Interim Specification for Heavy Engineering Structural Timbers from Eastern Australian Hardwoods | |
| Interim Specification for Indicating Ammeters and Volumeters (Panel type, with Maximum Flange Dimension not Exceeding 3 1/2 inches) | |
| Interim Specification for Lightweight Reinforcement for Brickwork | |
| Interim Specification for Metal Wall Ties for Brickwork | |
| Interim Specification for Methods of Testing Equipment for Suitability for Service Conditions | |
| Interim Specification for Paint, Interior, Fire Retardant, Flat | |
| Interim Specification for Paint, Interior, Fire Retardant, Gloss | |
| Interim Specification for Paint, Marking | |
| Interim Specification for Paper or Fibre-Board Inner Containers | |
| Interim Specification for Pigments | |
| Interim Specification for Preservation of Structural Timbers | |
| Interim Specification for Preservative Treatment of Timber (excluding timber for small ship construction, packing cases and structures) | |
| Interim Specification for Primer, Metal, Anti-Corrosive, Heat Resisting, Stoving | |
| Interim Specification for Primer, Metal, Anti-Corrosive, Heat-Resisting | |
| Interim Specification for Public Address and Amplifying Equipment for Amenities Purposes | |
| Interim Specification for Radio Broadcast Receivers For Amenities Purposes | |
| Interim Specification for Resin-Bonded Plywood for Boxes | |
| Interim Specification for Resin-emulsion Paste Paint for Exterior Use | |
| Interim Specification for Retro-Reflecting Materials for Road Signs and Vehicles | |
| Interim Specification for Retro-Reflectors for Road Signs and Vehicles | |
| Interim Specification for Rot-Proofing and Waterproofing Treatment of Cotton, Jute and Flax Fabrics | |
| Interim Specification for Rubber-Insulated Radio Connecting Wire (Hook-up Wire) Tropical Grade, for Internal Wiring at Voltages not Exceeding 600 Volts | |
| Interim Specification for Sheathing of Wooden Vessels with Copper | |
| Interim Specification for Sheathing of Wooden Vessels with Timber of High Natural Resistance to Marine Borer Attack | |
| Interim specification for Shellac Composition, "Lead Free" | |
| Interim Specification for Shellac Compositions | |
| Interim Specification for Silica Gel (Packaging Quality) for the Packing and Protection of Service Equipment | |
| Interim Specification for Special Plywood for use in Spar Webs | |
| Interim Specification for Special Plywood for use in Wing Skins | |
| Interim Specification for Spectacle Frames | |
| Interim Specification for Synthetic (P.V.C.) - Insulated Radio Connecting Wire for Internal Wiring at Voltages not exceeding 600 volts | |
| Interim Specification for Temporary Corrosion Preventives | |
| Interim specification for the sheathing of vessels with timber of known immunity to marine border attack. | |
| Interim Specification for Tubular Woven Cheese Bandages (For Export Purposes) | |
| Interim Specification for Undercoat for Enamel, Exterior | |
| Interim Specification for Undercoat for Enamel, Interior | |
| Interim Specification for Water-Displacing Fluid | |
| Interim Specification for Waterproof Adhesives for the Packing and Protection of Service Equipment | |
| Interim Specification for Wooden Poles for Overhead Telecommunication and Power Lines. | |
| Interim Specification for Wrapping Materials for the Packaging and Protection of Service Equipment | |
| Interim Standard Nomenclature for Commercial Timbers Imported into Australia | |
| Interior lighting calculations: a guide to computer programs | |
| International Atlas of Powder Metallurgical Microstructures | |
| INTERNATIONAL STANDARD IEC CEI NORME INTERNATIONALE 60364-7-708 Second edition Deuxi\xe8me \xe9dition 2007-05 Low-voltage electrical installations \x96 Part 7-708: Requirements for special installations or locations \x96 Caravan parks, camping parks and... | |
| Internet of Things for Architects: Architecting IoT solutions by implementing sensors, communication infrastructure, edge computing, analytics, and security | |
| Internet of Things Solutions for Pumping Systems | |
| Internet Protocol: an introductory guide | |
| Interpretations Volume 10 | |
| Interpretations Volume 11 | |
| Interpretations Volume 1 | |
| Interpretations Volume 2 | |
| Interpretations Volume 3 | |
| Interpretations Volume 4 | |
| Interpretations Volume 5 | |
| Interpretations Volume 6 | |
| Interpretations Volume 7 | |
| Interpretations Volume 8 | |
| Interpretations Volume 9 | |
| Interventional Pulmonary Medicine | |
| Introducing Palaeontology: A guide to ancient life | |
| INTRODUCTION TO FALL PROTECTION - 3RD EDITION - IDENTIFICATION OF SPECIFIC WALKING AND WORKING SURFACE HAZARDS, INCLUDING SLIPS AND TRIPS, STAIRWAYS AND RAMPS, LADDERS, SCAFFOLDS, AND ROOFS | |
| Introduction to Finite Element Analysis and Design | |
| INTRODUCTION TO MODERN ATMOSPHERIC EFFECTS | |
| Introduction to Modern Power Electronics | |
| Introduction to the E.750-Series of Recommendations on Traffic Engineering Aspects of Networks Supporting Personal Communications Services Series E: Overall Network Operation, Telephone Service, Service Operation and Human Factors Quality of... | |
| Introduction to the Finite Element Method, Third Edition | |
| INVENTORIES OF NATURAL GAS LIQUIDS AND LIQUIFIED REFINERY GASES *** ONE TIME PURCHASE OF INDIVIDUAL ISSUES *** | |
| INVENTORIES OF NATURAL GAS LIQUIDS AND LIQUIFIED REFINERY GASES | |
| Investing in energy efficiency: 1. Appraisal techniques and assumptions | |
| Investing in energy efficiency: Domestic hot water systems | |
| IODINE CAS # 7553-56-2 ORAL RISK ASSESSMENT DOCUMENT | |
| Ionic 2 Cookbook | |
| Ionic Cookbook | |
| iOS 10 Programming for Beginners | |
| iOS 12 Programming for Beginners | |
| Lead driers in paint: implications of their removal | |
| Lighting uniformity: subjective studies | |
| Lightweight veneer stone cladding panels | |
| LIST (LOW IMPACT SHOPFITTING TOOL) FOR DESIGNING GREENER SHOPFITTING DISPLAY EQUIPMENT | |
| Low-solvent primers: performance in construction steelwork | |
| Maintaining and improving steel houses | |
| Maintaining paintwork on exterior timber | |
| Man-made noise measurements in the HF range | |
| Managing fire risk in commercial buildings A guide for facilities managers | |
| Manual metallic arc welding in building construction | |
| Mathematical gain models of large-aperture space research service earth station antennas for compatibility analysis involving a large number of distributed interference sources | |
| Means of calculating low-orbit satellite visibility statistics | |
| MEASUREMENT METHODS FOR POWER LINE HIGH DATA RATE TELECOMMUNICATION SYSTEMS | |
| Measurement of field strength for VHF (metric) and UHF (decimetric) broadcast services, including television | |
| Metal cladding: assessing the thermal performance of built-up systems which use 'Z' spacers | |
| Method of test for electric cables, cords and conductors, Method 5.5 Fire tests - Performance requirements for electric cables required to maintain circuit integrity under fire conditions (Proposed to become... | |
| Methods for determining national long-term strategies for spectrum utilization | |
| Methods of test for electric cables, cords and conductors, Method 5.1: Fire tests - Tests on bunched cables (Proposed to become AS 1660.5.1) | |
| Methods of test for electric cables, cords and conductors, Method 5.2 Fire tests - Smoke density (Proposed to become AS 1660.5.2) | |
| Methods of test for electric cables, cords and conductors, Method 5.4 Fire tests - Determination of the amount of acid and corrosive gas evolved during the combustion of materials taken... | |
| MICRO-WIND TURBINES ON TALL BUILDINGS | |
| Minimising the risk of alkali-silica reaction: alternative methods | |
| Minimum design loads on buildings | |
| Mixture, liquid, for red lead paint | |
| Moisture barrier materials for the packing and protection of service equipment | |
| Mould and its control | |
| NATURAL FIBRE INSULATION An introduction to low-impact building materials | |
| Natural Fibre Reinforced Polymers (NFRPs) in the construction industry | |
| Naturally innovative Using biomimetics in construction | |
| New requirements for fire detection and alarm network systems | |
| Non-uniform lighting: the prediction of illuminance distributions | |
| Oil-base undercoating paint | |
| Oil-Base Wood Priming Paint | |
| Paint and Varnish Remover | |
| Paint Remover, Special | |
| Paint, Acid-Resisting, Black for Use on Accumulator Boxes, Etc. | |
| Paint, Ammunition, Quick Drying For Use on Ammunition, Ammunition Boxes Etc. | |
| Paint, Ammunition, Stoving For Use on Ammunition, Ammunition Boxes, Etc | |
| Paint, Amunition For Use on Ammunition, Ammunition Boxes, Etc | |
| Paint, Bituminous, Stoving | |
| Paint, Bituminous | |
| Paint, Case Marking | |
| Paint, Flat Oil, Camouflage, G.S. For Use on Wood, Galvanised Iron, Terne-Plated Iron and General Building Surfaces Other than Cement, Asbestos Cement, Etc | |
| Paint, Marine, Camouflage, Finishing for Use as an Exterior Finishing Paint above the Waterline on Amphibious Craft. | |
| Paint, Metal Primer Surfacing, Quick Drying For Use on Vehicles, Equipment, Ammunition, Ammunition Boxes, Etc | |
| Paint, Metal Primer Surfacing, Slow Drying | |
| Paint, Metal Primer Surfacing, Stoving For Use on Vehicles, Equipment, Ammunition, Ammunition Boxes, Etc | |
| Paint, Metal Priming, Slow Drying | |
| Paint, oil, interior, eggshell-flat finish | |
| Painting plastics | |
| Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations | |
| Passive fire precautions in LPS blocks of flats and maisonettes | |
| Passive stack ventilation systems: design and installation | |
| PERFORMANCE AND SERVICE LIFE IN THE ENVIRONMENTAL PROFILES METHODOLOGY AND GREEN GUIDE TO SPECIFICATION | |
| Perimeter chilled beams | |
| Pfa grouts for stabilising mine workings | |
| Phase-out of CFCs and HCFCs: options for owners and operators of air conditioning systems | |
| Photoluminescent markings for escape routes | |
| Pigments in Oil | |
| Planning of domestic air source heat pumps to mitigate noise impacts | |
| Plastics recycling in the construction industry | |
| Polymer modified grc | |
| Porous aggregates in concrete: sandstones from NW England | |
| Positive input ventilation | |
| Potential carbon emission savings from energy efficiency in housing | |
| Prefabricated housing in the UK; A case study \x96 CASPAR II, Leeds | |
| Prefabricated housing in the UK; A case study \x96 Murray Grove, Hackney | |
| Prefabricated housing in the UK; A summary paper | |
| Prefabricated housing in the UK | |
| Preloading uncompacted fills | |
| Preservative treated timber: the UK\x92s code of best practice | |
| Preventing hot water scaldings in bathrooms: using TMVs | |
| Primer, metal, anti-corrosive, stoving | |
| Primer, Metal, Anti-Corrosive | |
| Primer, Metal, Red-Lead/Linseed-Oil Base | |
| Primer, Metal, Zinc Chromate | |
| Prioritising maintenance and investment in school buildings | |
| Procedures to be adopted in testing materials for resistance to mould attack | |
| PRODUCTION AND MITIGATION OF INTERMODULATION PRODUCTS IN THE TRANSMITTER | |
| Progress in European standarisation for the protection and repair of concrete | |
| PROPAGATION AT FREQUENCIES ABOVE THE BASIC MUF | |
| PROPAGATION STATISTICS REQUIRED FOR BROADCASTING SERVICES USING THE FREQUENCY RANGE 30 TO 1000 MHz | |
| Properties of grc containing pfa | |
| Proprietary renders | |
| Propriety nosings for non-domestic stairs | |
| Protection of the space VLBI telemetry link | |
| Putty, Linseed Oil | |
| QUANTIFYING THE COST OF POOR HOUSING | |
| Radio observations of pulsars for precision timekeeping | |
| Rail track sleepers, crossing or lead timbers and bridge transoms | |
| Reinforced autoclaved aerated concrete planks designed before 1980 | |
| Reliability of underground heat mains in the UK | |
| Requirements for Cold Service Insulation Materials | |
| Resistance of masonry paints to microbial attack | |
| Retrofitting solar shading | |
| RISKS OF DUST FIRES AND EXPLOSIONS A review of European test methods | |
| SAFE AND SECURE TOWN CENTRES AT NIGHT An introduction to the BRE toolkit | |
| SAFER FLOORS Guidance on specifying flooring for internal and external safety in domestic buildings | |
| SAP FOR BEGINNERS An introductory guide for building professionals | |
| Schedules for the preservation of hem-fir timber | |
| SELECTING ELECTRONIC SECURITY SYSTEMS An introduction | |
| SELF-HEATING AND SPONTANEOUS COMBUSTION Isothermal test methods | |
| SERVICE LIFE PREDICTION OF TIMBER CLADDING Developments in standards and specifications | |
| Sharing of the 10.6-10.68 GHz band by the fixed and mobile services and the Earth exploration-satellit e service (passive) | |
| Sharing of the 36-37 GHz band by the fixed and mobile services and the Earth exploration-satellit e service (passive) | |
| SHORT DISTANCE RADIO-WAVE PROPAGATION IN SPECIAL ENVIRONMENTS Buildings, tunnels, mines, etc. | |
| Short-range radiocommunication devices measurements | |
| Short-range radiocommunication devices spectrum occupancy measurement techniques | |
| Small scale, building integrated, wind power systems | |
| SMART GROWTH A sustainable strategy for urban development and regeneration | |
| SMOKE DETECTION IN HIGH CEILING SPACES Part 1: Introduction, literature review and modelling | |
| SMOKE DETECTION IN HIGH CEILING SPACES Part 2: Fire tests and conclusions | |
| SOLAR THERMAL SYSTEMS Key factors for successful installations | |
| Sound insulation and the 1992 edition of Approved Document E | |
| Space and hot water heating: energy-efficiency in large gas-fired systems | |
| Specification for paint, metal priming, quick drying for use on vehicles, equipment, ammunition, ammunition boxes, etc. | |
| Specification for paint, metal priming, stoving for use on vehicles, equipment, ammunition, ammunition boxes, etc. | |
| Specification for paint, special, camouflage, finishing for use on vehicles and equipment | |
| Specification for paint, wood priming, g.s. for use as a priming paint on exterior and interior woodwork | |
| Specification for shellac composition | |
| SPECIFYING LED LIGHTING | |
| Standardised and prefabricated wiring for buildings | |
| Standby Power of Connected Devices and the Internet of Things | |
| STATIC AND DYNAMIC WIND LOADS ON BUILDING-MOUNTED MICROWIND TURBINES | |
| Statistical studies of fires | |
| Stone cladding panels: in-situ weathering | |
| STRAW BALE An introduction to low-impact building materials | |
| Studies related to the compatibility between Earth exploration-satellit e service (active) and the radiodetermination service in the 9 300-9 500 MHz and 9 800-10 000 MHz bands and between Earth... | |
| Studies related to the impact of active services allocated in adjacent or nearby bands on Earth exploration-satellit e service (passive) | |
| Studies related to the impact of active space services allocated in adjacent or nearby bands on radio astronomy service | |
| Summer condensation on vapour checks: tests with battened, internally-insulated walls | |
| Sustainability lessons from private finance and similar private initiatives | |
| Sustainable buildings: benefits for occupiers, designers, investors, developers and constructors | |
| SUSTAINABLE HOUSING REFURBISHMENT An update on current guidance and sources of information | |
| SUSTAINABLE INFORMATION TECHNOLOGY A review of current opportunities and challenges | |
| SUSTAINABLE REFURBISHMENT OF THE BRE VICTORIAN TERRACE Part 1: Design philosophy | |
| SUSTAINABLE REFURBISHMENT OF THE BRE VICTORIAN TERRACE Part 2: The construction process | |
| SUSTAINABLE REFURBISHMENT OF THE BRE VICTORIAN TERRACE Part 3: Lessons learned | |
| Techniques for mitigation of radio frequency interference in radio astronomy | |
| Techniques for monitoring ground movement above abandoned limestone mines | |
| Television cameras - Parallel component video interface for non-composite ENG signals | |
| The BRE low-energy office: an assessment of electric heating | |
| The BRESIM technique for measuring air infiltration rates in large dwellings | |
| The BRESTART self-adaptive optimum start algorithm | |
| The conformance of masonry mortars and their constituent sands with British Standards | |
| the construction products regulation and ce marking | |
| The effect of a rise of water table on the settlement of open-cast mining backfill | |
| The effect on digital communications systems of interference from other modulation schemes | |
| The environmental impact of buildings | |
| The gas engine driven heat pump dehumidification system at the Farnborough Recreation Centre - an assessment | |
| The insulation of dwellings against external noise | |
| The Integrated Nervous System: A Systematic Diagnostic Approach | |
| The passive gas tracer method for monitoring ventilation rates in buildings | |
| The performance of condensing boilers in non-domestic dwellings | |
| The performance of fibre cement slates: effects of condensation | |
| The performance of gas-fired condensing boilers in family housing | |
| The role of spectrum monitoring in support of inspections | |
| The role of windows in domestic burglary | |
| The safety and environmental requirements of new refrigerants | |
| The scope for reducing carbon emissions from housing | |
| The selection of timber for exterior joinery from the genus Shorea | |
| The selection of window hardware by performance | |
| The structural condition of prefabricated reinforced concrete houses designed before 1960 | |
| The weatherstripping of windows and doors | |
| ThermoWood cladding A technical summary | |
| Ties for cavity walls: new developments | |
| Ties for masonry cladding | |
| Ties for masonry walls: a decade of development | |
| Timber stress grading machines | |
| Traditional housing: a BRE study of quality | |
| Trickle ventilators in offices | |
| Trussed rafter roofs - load distributions and lateral stability | |
| U-values for basements | |
| Understanding the choices for building controls | |
| UNFIRED CLAY MASONRY An introduction to low-impact building materials | |
| Use and examples of systems in the fixed-satellite service in the event of natural disasters and similar emergencies for warning and relief operations | |
| Use of Appendix 10 of the Radio Regulations to convey information related to emissions from both GSO and non-GSO space stations including geolocation information | |
| Use of lightweight veneer stone cladding panels | |
| Use of structural steel in buildings | |
| Use of the x dB bandwidth criterion for determination of spectral properties of a transmitter in the out-of-band domain | |
| Using experience and publications in building design | |
| Vanish, spar, Water-Resisting | |
| Varnish, Copal, Synthetic or Natural For the Interior of High-Explosive Shell | |
| Varnish, Electrical Insulating, Sealing D.C. and A.F. Air Drying | |
| Varnish, Interior | |
| Ventilating cold deck flat roofs | |
| VENTILATION RATE MEASUREMENT New tracer gases and techniques for healthy indoor environments | |
| Visual alarm devices for fire | |
| VOC emissions from flooring adhesives; European test methods and labelling | |
| Volumetric strain of concrete under uniaxial compression; Sustained loading and high grade concrete | |
| Water conservation | |
| Water economy with the Skevington/BRE controlled flush valve for WCs | |
| Water reducing admixtures in concrete | |
| Weatherproof joints in large panel systems: 3. Investigation and diagnosis of failure | |
| Weatherproof joints in large panel systems: flat roofs, balconies and deck accessways | |
| Whole Life Value: sustainable design in the built environment | |
| Wireless communications systems in dwellings |
| << Prev | Next >> |