Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 100 Cases in Obstetrics and Gynaecology | |
| 100 Cases in Psychiatry | |
| \xc9nergie nucl\xe9aire - Technologie du combustible - Tourillons pour colis de transport de mati\xe8res radioactives | |
| \xc9quipements de protection destin\xe9s \xe0 \xeatre utilis\xe9s en hockey sur glace - Partie 1: Exigences g\xe9n\xe9rales | |
| \xc9quipements de protection destin\xe9s \xe0 \xeatre utilis\xe9s en hockey sur glace - Partie 2: Protections de t\xeate pour les skateurs | |
| \xc9quipements de protection destin\xe9s \xe0 \xeatre utilis\xe9s en hockey sur glace - Partie 3: Protections faciales pour les skateurs | |
| \xc9quipements de protection destin\xe9s \xe0 \xeatre utilis\xe9s en hockey sur glace - Partie 4: Protections de t\xeate et de visage pour les gardiens de but | |
| A Guide to Personnel Qualification and Certification | |
| A Model Written Practice | |
| A\xe9ronautique et espace - \xc9crous hexagonaux a cr\xe9neaux, hauteur r\xe9duite, surplats r\xe9duits, a filetage MJ, classifications: 450 MPa (a temperature ambiante)/425 OC, 600 MPa (a temperature ambiante)/235 OC, 600 MPa... | |
| A\xe9ronautique et espace - Rivets ordinaires - Identification du mat\xe9riau et de la s\xe9rie m\xe9trique | |
| A\xe9ronefs - Contacteurs-disjonct eurs hybrides command\xe9s \xe0 distance - Prescriptions g\xe9n\xe9rales | |
| A\xe9ronefs - Orifices de remplissage par gravit\xe9 | |
| Abrogazione Norme CEI CT 101 | |
| Acier - Dosage du mangan\xe8se - M\xe9thode par spectrom\xe9trie d\x92\xe9mission atomique de plasma avec couplage inductif | |
| Aciers - Dosage du bore - M\xe9thode spectrophotom\xe9tri que \xe0 la curcumine | |
| Aciers et fontes - Dosage du chrome - M\xe9thode par spedrom\xe9trie d\x92absorption atomique dans la flamme | |
| Aciers et fontes - Dosage du titane - M\xe9thode spectrophotom\xe9tri que au diantipyrylm\xe9than e | |
| Acoustics - Method for the Measurement of Airborne Noise Emitted by Small Air-Moving Devices | |
| Acoustics \x97 Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices \x97 Part 1: Airborne noise measurement | |
| Acoustics \x97 Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices \x97 Part 2: Structure-borne vibration measurements | |
| Acoustique - Mesurage en laboratoire de l'isolation acoustique des \xe9l\xe9ments de construction - Partie 1: R\xe8gles d'application pour produits particuliers AMENDEMENT 1: Lignes directrices pour la d\xe9termination de l'indice de... | |
| Acoustique - Mesurage en laboratoire de l'isolation acoustique des \xe9l\xe9ments de construction - Partie 1: R\xe8gles d'application pour produits particuliers | |
| Acoustique - Mesurage en laboratoire de l'isolation acoustique des \xe9l\xe9ments de construction - Partie 2: Mesurage de l'isolation au bruit a\xe9rien | |
| Acoustique - Mesurage en laboratoire de l'isolation acoustique des \xe9l\xe9ments de construction - Partie 3: Mesurage de l'isolation au bruit de choc | |
| Acoustique - Mesurage en laboratoire de l'isolation acoustique des \xe9l\xe9ments de construction - Partie 4: Exigences et modes op\xe9ratoires de mesure | |
| Acoustique - Mesurage en laboratoire de l'isolation acoustique des \xe9l\xe9ments de construction - Partie 5: Exigences relatives aux installations et appareillage d'essai AMENDEMENT 1: Bruit produit par la pluie | |
| Acoustique - Mesurage en laboratoire de l'isolation acoustique des \xe9l\xe9ments de construction - Partie 5: Exigences relatives aux installations et appareillage d'essai | |
| Acoustique - Mesurage en laboratoire de l\x92isolation acoustique des \xe9l\xe9ments de construction - Partie 1: R\xe8gles d\x92application pour produits particuliers AMENDEMENT pluie 2: Bruit produit par la pluie | |
| Acoustique - Mesurage en laboratoire de l\x92isolation acoustique des \xe9l\xe9ments de construction - Partie 3: Mesurage de l\x92isolation au bruit de choc AMENDEMENT 1 | |
| Adh\xe9sifs \x97 D\xe9termination de la r\xe9sistance au cisaillement des adh\xe9sifs ana\xe9robies sur assemblage type axe-bague | |
| Air Cargo and Ground Equipment - Vocabulary | |
| ALTERNATIVE APPROACHES TO LIFE SAFETY | |
| Anodisation de l'aluminium et de ses alliages - D\xe9termination de la nettet\xe9 d'image sur couches anodiques - M\xe9thode des \xe9chelles gradu\xe9es | |
| Anodized Aluminium and Aluminium Alloys - Instrumental Determination of Image Clarity of Anodic Oxidation Coatings - Instrumental Method | |
| Anodizing of aluminium and its alloys \x97 Instrumental determination of image clarity of anodic oxidation coatings \x97 Instrumental method TECHNICAL CORRIGENDUM 1 | |
| Appareils de levage \xe0 charge suspendue - Limiteurs et indicateurs - Partie 1: G\xe9n\xe9ralit\xe9s | |
| Appareils de levage \xe0 charge suspendue - Limiteurs et indicateurs - Partie 3: Grues \xe0 tour | |
| Appareils de levage \xe0 charge suspendue - Limiteurs et indicateurs - Partie 4: Grues \xe0 fl\xe8che RECTIFICATIF TECHNIQUE 1 | |
| Appareils de levage \xe0 charge suspendue - Limiteurs et indicateurs - Partie 4: Grues \xe0 fl\xe8che | |
| Appearance of Gear Teeth - Terminology of Wear and Failure | |
| Application Protocol for Product Life Cycle Support | |
| Applying Low- Voltage Circuit Breakers Used in Industrial and Commercial Power Systems | |
| Art dentaire - Produits souples pour intrados de proth\xe8ses dentaires amovibles - Part 1 Produits pour usage \xe0 court terme RECTIFICATIF TECHNIQUE 1 | |
| Art dentaire - Produits souples pour intrados de proth\xe8ses dentaires amovibles - Partie 1: Produits pour usage \xe0 court terme | |
| Art dentaire - Produits souples pour intrados de proth\xe8ses dentaires amovibles - Partie 2: Produits pour usage \xe0 long terme | |
| Articles terminologiques dans les normes - Partie 1: Exigences g\xe9n\xe9rales et exemples de pr\xe9sentation | |
| Articles terminologiques dans les normes - Partie 2: Adoption d\x92articles terminologiques normalis\xe9s | |
| Ash from Petroleum Products by Microwave | |
| Audit Checklist for CP-189 | |
| Audit Checklist for SNT-TC-1A | |
| Banking - Procedures for Message Encipherment (Wholesale) - Part 1: General Principles | |
| Banking - Procedures for Message Encipherment (Wholesale) - Part 2: DEA Algorithm | |
| Bases for design of structures - Accidental actions | |
| Bases for Design of Structures - Serviceability of Buildings Against Vibration | |
| Bouchons en li\xe8ge - D\xe9termination de la migration globale | |
| Bouteilles \xe0 gaz - Gaz et m\xe9langes de gaz - Partie 2: D\xe9termination du pouvoir oxydant des gaz et m\xe9langes de gaz toxiques et corrosifs | |
| Bouteilles \xe0 gaz - Robinets de bouteilles - Sp\xe9cifications et essais de type AMENDEMENT 1: F\xfbts \xe0 pression et tubes | |
| Bouteilles \xe0 gaz - Robinets de bouteilles - Sp\xe9cifications et essais de type | |
| Bouteilles \xe0 gaz \x97 Gaz et m\xe9langes de gaz \x97 D\xe9termination de la toxicit\xe9 pour le choix des raccords de sortie de robinets | |
| Calculation of Load Capacity of Bevel Gears - Part 1: Introduction and General Influence Factors | |
| Calculation of Load Capacity of Bevel Gears - Part 2: Calculation of Surface Durability (Pitting) | |
| Calculation of Load Capacity of Bevel Gears - Part 3: Calculation of Tooth Root Strength | |
| Carbon Fibre - Determination of Linear Density | |
| Carbonaceous Materials for the Production of Aluminium - Calcined Coke for Electrodes - Determination of the Electrical Resistivity of Granules | |
| Carbonaceous Materials Used in the Production of Aluminium - Pitch for Electrodes - Determination of Sulfur Content by an Instrumental Method | |
| Certification Scheme for Steel Bars and Wires for the Reinforcement of Concrete Structures | |
| Certified Ratings Program - Acoustical Duct Silencers | |
| Cha\xeenes pour motocycles - Caract\xe9ristiques et m\xe9thodes d'essai | |
| Cin\xe9matographie - Bobines pour chargement en plein jour pour cam\xe9ras 16 mm - Dimensions | |
| Cinematography - Graphical Symbols - Description | |
| Classification des produits r\xe9fractaires fa\xe7onn\xe9s denses - Partie 3: Produits basiques contenant de 7 % \xe0 50 % de carbone r\xe9siduel | |
| Classification des produits r\xe9fractaires fa\xe7onn\xe9s denses - Partie 4: Produits sp\xe9ciaux | |
| Classification of dense shaped refractory products \x97 Part 2: Basic products containing less than 7 % residual carbon TECHNICAL CORRIGENDUM 1 | |
| Coal - Methods for Evaluating Flocculants for Use in Coal Preparation - Part 1: Basic Parameters | |
| Coal Methods for evaluating flocculants for use in coal preparation Part 2: Flocculants as filter aids in rotary vacuum filtration systems | |
| Code for Means of Egress for Buildings and Structures | |
| Codigo De Seguridad Humana | |
| Coffee - Determination of Caffeine Content - Method Using High- Performance Liquid Chromatography | |
| Coke - D\xe9termination de la densit\xe9 relative vraie, de la densit\xe9 relative apparente et de la porosit\xe9 RECTIFICATIF TECHNIQUE 1 | |
| Coke \x97 Part 1: Determination of apparent relative density | |
| Coke \x97 Part 2: Determination of true relative density | |
| Coke \x97 Part 3: Determination of porosity | |
| Concentr\xe9s de sulfure de cuivre - Dosage du cuivre - M\xe9thodes titrim\xe9triques | |
| Copper, Lead and Zinc Sulfide Concentrates - Determination of Mass Loss of Bulk Materials on Drying | |
| Corrosion des m\xe9taux et alliages - Essais de corrosion aqueuse des alliages de zirconium utilis\xe9s dans les r\xe9acteurs nucl\xe9aires RECTIFICATIF TECHNIQUE 1 | |
| Corrosion des m\xe9taux et alliages - Essais de corrosion aqueuse des alliages de zirconium utilis\xe9s dans les r\xe9acteurs nucl\xe9aires | |
| Cosm\xe9tiques - M\xe9thodes analytiques - Nitrosamines: Recherche et dosage de la N-nitrosodi\xe9thano lamine (NDELA) dans les cosm\xe9tiques par CLHP, photolyse et d\xe9rivation post-colonne | |
| Courroies transporteuses - Caract\xe9ristiques des rev\xeatements - Classification AMENDEMENT 1 | |
| Courroies transporteuses - Caract\xe9ristiques des rev\xeatements - Classification | |
| Cranes - Limiting and indicating devices - Part 2: Mobile cranes AMENDMENT 1 | |
| Cranes - Limiting and Indicating Devices - Part 2: Mobile Cranes | |
| Cranes - Limiting and Indicating Devices - Part 5: Overhead Travelling and Portal Bridge Cranes | |
| Cuir - D\xe9termination chimique de la teneur en chrome(VI) du cuir - Vieillissement thermique du cuir et d\xe9termination de la teneur en chrome hexavalent | |
| Cycles - Pignons et corps d\x92entra\xeenement cannel\xe9s - Dimensions d\x92assemblage | |
| Deluge and Preaction Sprinkler Systems | |
| Deluge Systems and Preaction Systems | |
| Density of Viscous Liquids and Semi-Solid Hydrocarbons by Nitrogen Displacement | |
| Dental Provider's Guide to the Electronic Dental Record | |
| Determination of polychlorinated biphenils (PCBs) in mineral insulating oils by packed column gas chromatography (GC) | |
| Determination of Trace Arsine and Phosphine in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry | |
| Determination of Trace Methyl and Ethyl Mercaptan in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry | |
| Determination of Trace Oxygenates in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry | |
| Determination of Trace Permanent Gases in Polymer Grade Ethylene & Propylene by Gas Chromatography-Pulse d Discharge Helium Ionization Detector | |
| Determination of Trace Propadiene and Methyl Acetylene Impurities in Polymer Grade Propylene by Gas Chromatography | |
| Determination of water in insulating oils and oil-impregnated paper and pressboard | |
| Document management \x97 Business process baselining and analysis | |
| Draft EN 50136-7 EN 50136 Alarm systems - Alarm transmission systems and equipment Part 1-7 Requirements for protocol used in the IP based systems | |
| Ductile Iron Pipelines - Rubber Sealing Rings for Pipelines Carrying Potable Water | |
| Eficiencia Energ\xe9tica en Construcciones Existentes | |
| Electrostatics Guide and standard outline | |
| Energy Conservation in Existing Buildings | |
| Energy Efficiency in Existing Buildings | |
| Engins de terrassement - D\xe9termination des pentes limites pour l\x92aptitude au fonctionnement des syst\xe8mes de fluides \xe9quipant les engins - M\xe9thode d\x92essai statique | |
| Engins de terrassement - Engins \xe0 chenilles - Exigences de performance et modes op\xe9ratoires d'essai des dispositifs de freinage | |
| Engins de terrassement - Environnement de l'enceinte de l'op\xe9rateur - Partie 1: Termes et d\xe9finitions | |
| Engins de terrassement - Environnement de l'enceinte de l'op\xe9rateur - Partie 2: M\xe9thode d'essai de l'\xe9l\xe9ment du filtre \xe0 air | |
| Engins de terrassement - Environnement de l'enceinte de l'op\xe9rateur - Partie 3: M\xe9thode d'essai du syst\xe8me de pressurisation | |
| Engins de terrassement - Environnement de l'enceinte de l'op\xe9rateur - Partie 4: Performances et m\xe9thode d'essai des syst\xe8mes de chauffage, de ventilation et de climatisation (CVCA) | |
| Engins de terrassement - Environnement de l'enceinte de l'op\xe9rateur - Partie 5: M\xe9thode d'essai du syst\xe8me de d\xe9givrage du pare-brise | |
| Engins de terrassement - Environnement de l'enceinte de l'op\xe9rateur - Partie 6: D\xe9termination de l'effet du chauffage solaire | |
| Engins de terrassement - Pelles hydrauliques - Essais de laboratoire et crit\xe8res de performance des structures de protection de l'op\xe9rateur RECTIFICATIF TECHNIQUE 1 | |
| Engins de terrassement - Pelles hydrauliques - Essais de laboratoire et crit\xe8res de performance des structures de protection de l'op\xe9rateur | |
| Engins de terrassement - Ralentisseurs pour tombereaux et d\xe9capeuses - Essais de performance | |
| Engins de terrassement - Syst\xe8me de num\xe9rotation pour l'identification des produits | |
| Engins de terrassement - Syst\xe8me de num\xe9rotation pour l\x92identification des produits AMENDEMENT 1 | |
| Engins de terrassement - Syst\xe9mes de d\xe8marrage verrouillables | |
| Engrais liquides - D\xe9sa\xe9ration des \xe9chantillons de suspension par entra\xeenement en couche mince | |
| Engrais liquides - Examen visuel pr\xe9liminaire et pr\xe9paration des \xe9chantillons pour essais physiques | |
| Engrais solides - D\xe9termination de la teneur en sulfates solubles dans les acides min\xe9raux - M\xe9thode gravim\xe9trique | |
| Errata to IEEE Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities | |
| Essais de r\xe9sistance au feu - Clapets r\xe9sistant au feu pour des syst\xe8mes de distribution d\x92air - Partie 1: M\xe9thode d\x92essai | |
| Essais de r\xe9sistance au feu - Clapets r\xe9sistant au feu pour syst\xe8mes de distribution d'air - Partie 2: Classification, crit\xe8res et domaine d'application des r\xe9sultats d'essai | |
| Essais de r\xe9sistance au feu - Clapets r\xe9sistant au feu pour syst\xe8mes de distribution d'air - Partie 3: Lignes directrices sur la m\xe9thode d'essai | |
| Essais et \xe9valuation des chocs (chocs simples) sur l\x92homme ou un substitute d\x92homme - Lignes directrices concernant les aspects techniques | |
| Face Protectors and Visors for Ice Hockey Players | |
| Fibre de carbone - D\xe9termination de la masse volumique | |
| Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 1: Card life cycle TECHNICAL CORRIGENDUM 1 | |
| Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards - Part 2: Transaction Process | |
| Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards - Part 3: Cryptographic Key Relationships | |
| Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards - Part 4: Secure Application Modules | |
| Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards - Part 5: Use of Algorithms | |
| Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards - Part 6: Cardholder Verification First Edition | |
| Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards - Part 7: Key Management | |
| Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards - Part 8: General Principles and Overview | |
| Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method AMENDMENT 1 | |
| Fire resistance tests - Fire dampers for air distribution systems - Part 4: Test of thermal release mechanism AMENDMENT 1: specific performance requirement for thermal release mechanism based upon performance... | |
| Fire Resistance Tests - Fire Dampers for Air Distribution Systems - Part 4: Test of Thermal Release Mechanism | |
| Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers | |
| Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals | |
| Fire tests for building elements and components \x97 Fire testing of service installations \x97 Part 2: Linear joint (gap) seals TECHNICAL CORRIGENDUM 1 | |
| Fire tests for building elements and components \x97 Fire testing of service installations \x97 Part 2: Linear joint (gap) seals | |
| Fraises cylindriques deux tailles \xe0 plaquettes h\xe9lico\xefdales en m\xe9taux-durs, bras\xe9es - Partie 1: Dimensions des fraises \xe0 queue cylindrique | |
| Fraises cylindriques deux tailles \xe0 plaquettes h\xe9lico\xefdales en m\xe9taux-durs, bras\xe9es - Partie 2: Dimensions des fraises \xe0 queue c\xf4ne 7/24 | |
| Gas Cylinders - Terminology First Edition | |
| Gas cylinders \x97 Gases and gas mixtures \x97 Determination of toxicity for the selection of cylinder valve outlets AMENDMENT 1 | |
| Gassing of insulating liquids under electrical stress and ionisation | |
| Gaz et m\xe9langes de gaz - D\xe9termination du potentiel d'inflammabilit\xe9 et d'oxydation pour le choix des raccords de sortie de robinets RECTIFICATIF TECHNIQUE 1 | |
| Gaz et m\xe9langes de gaz - D\xe9termination du potentiel d'inflammabilit\xe9 et d'oxydation pour le choix des raccords de sortie de robinets | |
| Gaz naturel - D\xe9termination de l'eau par la m\xe9thode Karl Fischer - Partie 1: Introduction | |
| Gaz naturel - Dosage de l'eau par la m\xe9thode de Karl Fischer - Partie 2: M\xe9thode titrim\xe9trique | |
| Gaz naturel - Dosage de l'eau par la m\xe9thode de Karl Fischer - Partie 3: M\xe9thode coulom\xe9trique | |
| Gear Nomenclature, Definition of Terms with Symbols | |
| Gear Nomenclature, Definitions of Terms with Symbols | |
| Guide for the application of the basic specification IEC 61340-5-1 - Specification for the protection of electronic devices from electrostatic phenomena | |
| Guide for the application of the basic specification IEC 61340-5-1 Specification for the protection of electronic devices from electrostatic phenomena | |
| Guide on Alternative Approaches to Life Safety Handbook | |
| GUIDE ON ALTERNATIVE APPROACHES TO LIFE SAFETY | |
| Guide to Digital Dental Photography and Imaging | |
| Guide to Software Design Descriptions | |
| GUIDELINES FOR THE DOCUMENTATION OF DIGITAL COMPUTER PROGRAMS | |
| Hardware Recommendations for Dental Information Systems | |
| Health informatics \x97 Messages and communication \x97 Web access reference manifest | |
| High Breaking Load Steel Wire Ropes - Specifications | |
| Houille - D\xe9termination de la capacit\xe9 de r\xe9tention d\x92humidit\xe9 | |
| Huile essentielle d\x92estragon (Artemisia dracunculus L.) | |
| Human Machine Interfaces for Process Automation Systems | |
| Implementation Guide for ANSI/ADA Specification No. 1000 | |
| Industrial automation systems \x97 Product data representation and exchange \x97 Part 55: Integrated generic resource: Procedural and hybrid representation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 101: Intergrated Application Resources: Draughting | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 104: Integrated Application Resource: Finite Element Analysis | |
| Industrial automation systems and integration - Product data representation and exchange - Part 104: Integrated generic resource: Finite element analysis TECHNICAL CORRIGENDUM 2 | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 105: Integrated Application Resource: Kinematics | |
| Industrial automation systems and integration - Product data representation and exchange - Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models | |
| Industrial automation systems and integration - Product data representation and exchange - Part 108: Integrated generic resource: Parameterization and constraints for explicit geometric product models TECHNICAL CORRIGENDUM 2 | |
| Industrial automation systems and integration - Product data representation and exchange - Part 109: Integrated generic resource: Kinematic and geometric constraints for assembly models TECHNICAL CORRIGENDUM 2 | |
| Industrial automation systems and integration - Product data representation and exchange - Part 111: Integrated generic resource: Elements for the procedural modelling of solid shapes TECHNICAL CORRIGENDUM 2 | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 11: Description Methods: the EXPRESS Language Reference Manual | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1: Overview and Fundamental Principles First Edition | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 201: Application Protocol: Explicit Draughting | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 202: Application Protocol: Associative Draughting | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 203: Application Protocol: Configuration Controlled Design | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 204: Application Protocol: Mechanical Design Using Boundary Representation | |
| Industrial automation systems and integration - Product data representation and exchange - Part 207: Application protocol: Sheet metal die planning and design TECHNICAL CORRIGENDUM 1 | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 207: Application Protocol: Sheet Metal Die Planning and Design | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 209: Application Protocol: Composite and Metallic Structural Analysis and Related Design | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 210: Application Protocol: Electronic Assembly, Interconnection, and Packaging Design | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 212: Application Protocol: Electrotechnical Design and Installation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 214: Application Protocol: Core Data for Automotive Mechanical Design Processes | |
| Industrial automation systems and integration - Product data representation and exchange - Part 219: Application protocol: Dimensional inspection information exchange | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 21: Implementation Methods: Clear Text Encoding of the Exchange Structure | |
| Industrial automation systems and integration - Product data representation and exchange - Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 224: Application Protocol: Mechanical Product Definition for Process Planning Using Machining Features | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 225: Application Protocol: Building Elements Using Explicit Shape Representation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 227: Application Protocol: Plant Spatial Configuration | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 22: Implementation Methods: Standard Data Access Interface | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 232: Application Protocol: Tehcnical Data Packaging Core Information and Exchange | |
| Industrial automation systems and integration - Product data representation and exchange - Part 233: Application protocol: Systems engineering | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 23: Implementation Methods: C++ Language Binding to the Standard Data Access Interface | |
| Industrial automation systems and integration - Product data representation and exchange - Part 242: Application protocol: Managed model-based 3D engineering TECHNICAL CORRIGENDUM 1 | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 24: Implementation Methods: C Language Binding of Standard Data Access Interface | |
| Industrial automation systems and integration - Product data representation and exchange - Part 28: Implementation methods: XML representations of EXPRESS schemas and data, using XML schemas | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 31: Conformance Testing Methodology and Framework: General Concepts | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 32: Conformance Testing Methodology and Framework: Requirements on Testing Laboratories and Clients | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 34: Conformance Testing Methodology and Framework: Abstract Test Methods for Application Protocol Implementations | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 41: Integrated Generic Resources: Fundamentals of Product Description and Support | |
| Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource: Geometric and topological representation, TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resources: Geometric and topological representation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic Resources: Representation Structures | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic Resource: Product Structure Configuration - TECHNICAL CORRIGENDUM 1 | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic Resources: Product Structure Configuration | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 45: Integrated Generic Resource: Materials | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 47: Integrated Generic Resource: Shape Variation Tolerances | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 49: Integrated Generic Resources: Process Structure and Properties | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 501: Application Interpreted Construct: Edge-Based Wireframe | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 502: Application Interpreted Construct: Shell-Based Wireframe | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 503: Application Interpreted Construct: Geometrically Bounded 2D Wireframe | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 504: Application Interpreted Construct: Draughting Annotation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 505: Application Interpreted Construct: Drawing Structure and Administration | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 506: Application Interpreted Construct: Draughting Elements | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 507: Application Interpreted Construct: Geometrically Bounded Surface | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 508: Application Interpreted Construct: Non-Manifold Surface | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 509: Application Interpreted Construct: Manifold Surface | |
| Industrial automation systems and integration - Product data representation and exchange - Part 50: Integrated generic resource: Mathematical constructs TECHNICAL CORRIGENDUM 2 | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 50: Integrated Generic Resources: Mathematical Constructs | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 510: Application Interpreted Construct: Geometrically Bounded Wireframe | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 511: Application Interpreted Construct: Topologically Bounded Surface | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 512: Application Interpreted Construct: Faceted Boundary Representation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 513: Application Interpreted Construct: Elementry Boundary Representation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 514: Application Interpreted Construct: Advanced Boundary Representation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 515: Application Interpreted Construct: Constructive Solid Geometry | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 517: Application Interpreted Construct: Mechanical Design Geometric Presentation TECHNICAL CORRIGENDUM 1 | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 517: Application Interpreted Construct: Mechanical Design Geometric Presentation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 518: Application Interpreted Construct: Mechanical Design Shaded Presentation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 519: Application Interpreted Construct: Geometric Tolerances | |
| Industrial automation systems and integration - Product data representation and exchange - Part 51: Integrated generic resource: Mathematical representation | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 520: Application Interpreted Construct: Associative Draughting Elements | |
| Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 521: Application Interpreted Construct: Manifold Subsurface | |
| Industrial automation systems and integration - Product data representation and exchange - Part 522: Application interpreted construct: Machining features | |
| Industrial automation systems and integration - Product data representation and exchange - Part 52: Integrated generic resource: Mesh based topology TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration - Product data representation and exchange - Part 53: Integrated generic resource: Numerical analysis | |
| Industrial automation systems and integration - Product data representation and exchange - Part 54: Integrated generic resource: Classification and set theory | |
| Industrial automation systems and integration - Product data representation and exchange Part 236: Application protocol: Furniture catalog and interior design and Application modules | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 104: Integrated application resource: Finite element analysis TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 111: Integrated application resource: Elements for the procedural modelling of solid shapes TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 111: Integrated application resource: Elements for the procedural modelling of solid shapes | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 113: Integrated application resource: Mechanical features | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 215: Application protocol: Ship arrangement TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 216: Application protocol: Ship moulded forms | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 221: Application protocol: Functional data and their schematic representation for process plants | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 227: Application protocol: Plant spatial configuration TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 235: Application protocol: Engineering properties for product design and verification TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 235: Application protocol: Engineering properties for product design and verification | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 238: Application protocol: Application interpreted model for computerized numerical controllers | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 242: Application protocol: Managed model-based 3D engineering | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 243: Application protocol: For modelling and simulation information in a collaborative systems engineering context (MoSSEC) | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 2: Vocabulary | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 41: Integrated generic resource: Fundamentals of product description and support TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 41: Integrated generic resource: Fundamentals of product description and support TECHNICAL CORRIGENDUM 2 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 50: Integrated generic resource: Mathematical constructs TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 52: Integrated generic resource: Mesh-based topology | |
| Industrial automation systems and integration \x97 Product data representation and exchange \x97 Part 55: Integrated generic resource: Procedural and hybrid representation TECHNICAL CORRIGENDUM 1 | |
| Industrial automation systems and integration Product data representation and exchange Part 107: Integrated application resource Finite element analysis definition relationships | |
| Industrial automation systems and integration Product data representation and exchange Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models | |
| Industrial automation systems and integration Product data representation and exchange Part 112: Integrated application resource: Modelling commands for the exchange of procedurally represented 2D CAD models | |
| Industrial automation systems and integration Product data representation and exchange Part 14: Description methods: The EXPRESS-X language reference manual | |
| Industrial automation systems and integration Product data representation and exchange Part 215: Application protocol: Ship arrangement | |
| Industrial automation systems and integration Product data representation and exchange Part 216: Application protocol: Ship moulded forms | |
| Industrial automation systems and integration Product data representation and exchange Part 218: Application protocol: Ship structures | |
| Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process plans for machined products | |
| Industrial automation systems and integration Product data representation and exchange Part 46: Integrated generic resources: Visual presentation | |
| Industrial automation systems and integration Product data representation and exchange Part 523: Application interpreted construct: Curve swept solid | |
| Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol Specification First Edition | |
| Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 2: Protocol Implementation Conformance Statement (PICS) Proforma | |
| Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Service Definition First Edition | |
| Information and Documentation - Open Systems Interconnection - Search and Retrieve Application Protocol Specification - Part 1: Protocol Specification | |
| Information and Documentation - Open Systems Interconnection - Search and Retrieve Application Service Definition | |
| International Terminology Standards - Preparation and Layout | |
| Iron Ores - Determination of Calcium Content - Flame Atomic Absorption Spectrometric Method | |
| Iron Ores - Determination of Magnesium Content - Flame Atomic Absorption Spectrometric Method First Edition | |
| Liants pour peintures et vernis - D\xe9termination des diisocyanates monom\xe8res dans les r\xe9sines isocyanates | |
| LIFE SAFETY CODE - SET OF 48 TABS | |
| LIFE SAFETY CODE AND HANDBOOK SET | |
| LIFE SAFETY CODE HANDBOOK | |
| Life Safety Code | |
| Lits rabattables - Exigences de s\xe9curit\xe9 et essais - Partie 1: Exigences de s\xe9curit\xe9 | |
| Lits rabattables - Exigences de s\xe9curit\xe9 et essais - Partie 2: M\xe9thodes d\x92essai | |
| M\xe9decine bucco-dentaire - M\xe9thodes d'essai de corrosion des mat\xe9riaux m\xe9talliques | |
| M\xe9thodes d'essai de corrosion des rev\xeatements m\xe9talliques et inorganiques sur substrats m\xe9talliques - Cotation des \xe9prouvettes et des articles manufactur\xe9s soumis aux essais de corrosion | |
| M\xe9thodes d\x92essai pour l\x92\xe9valuation de la performance des m\xe9dias et des dispositifs de filtration mol\xe9culaire pour la ventilation g\xe9n\xe9rale - Partie 1: M\xe9dias de filtration mol\xe9culaire (GPACM) | |
| M\xe9thodes d\x92essai pour l\x92\xe9valuation de la performance des m\xe9dias et des dispositifs de filtration mol\xe9culaire pour la ventilation g\xe9n\xe9rale \x97 Partie 2: Dispositifs de filtration mol\xe9culaire (GPACD) | |
| Manipulating Industrial Robots - Safety | |
| Mat\xe9riaux amortissants - Repr\xe9sentation graphique du module complexe | |
| Mat\xe9riaux m\xe9talliques - T\xf4les et bandes - D\xe9termination du coefficient d'\xe9crouissage en traction | |
| Mat\xe9riaux m\xe9talliques - T\xf4les et bandes - D\xe9termination du coefficient d'anisotropie plastique | |
| Mat\xe9riel de forage des roches - \xc9quipements pour forage percutant \xe0 filetage corde, de dimension nominale 22 mm \xe0 38 mm | |
| Mat\xe9riel de forage des roches - Filetage corde \xe0 gauche | |
| Mat\xe9riel de soudage aux gaz - Marquage des mat\xe9riels de soudage aux gaz, de coupage et pour techniques connexes | |
| Mat\xe9riel pour l'industrie textile - Machines \xe0 tricoter rectilignes \xe0 mailles jet\xe9es - Num\xe9rotage des barres \xe0 passettes | |
| Metallic Materials - Hardness Testing - Tables of Knoop Hardness Values for Use in Tests Made on Flat Surfaces | |
| Methods of test for petroleum and its products Part 10: Determination of kerosine burning characteristics 24-hour method | |
| Microbiologie de la cha\xeene alimentaire - M\xe9thode horizontale pour la recherche et le d\xe9nombrement de Campylobacter spp. - Partie 2: Technique par comptage des colonies | |
| Microbiologie des aliments - M\xe9thode horizontale pour la recherche de Yersinia enterocolitica pr\xe9sum\xe9es pathog\xe8nes | |
| Microbiologie des aliments - M\xe9thode horizontale pour la recherche et le d\xe9nombrement de Campylobacter spp. - Partie 1: M\xe9thode de recherche | |
| Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for Detection of Thermotolerant Campylobacter | |
| Microbiology of the food chain \x97 Horizontal method for detection and enumeration of Campylobacter spp. \x97 Part 1: Detection method AMENDMENT 1: Inclusion of methods for molecular confirmation and identification... | |
| Microbiology of the food chain \x97 Horizontal method for detection and enumeration of Campylobacter spp. \x97 Part 2: Colony-count technique AMENDMENT 1: Inclusion of methods for molecular confirmation and identification... | |
| Micrographics - Recommendations for the Creation of Original Documents | |
| Micrographics \x97 Rotary camera for 16mm microfilm \x97 Mechanical and optical characteristics | |
| Micrographie - Lecteurs-reproducteu rs de microformes transparentes - Caract\xe9ristiques | |
| Minerais alumineux - Dosage du fer - M\xe9thode de r\xe9duction au trichlorure de titane | |
| Minerais alumineux - M\xe9thodes exp\xe9rimentales de contr\xf4le de l\x92erreur syst\xe9matique d\x92\xe9chantillonn age | |
| Minerais alumineux - M\xe9thodes exp\xe9rimentales de contr\xf4le de la fid\xe9lit\xe9 d'\xe9chantillonnage | |
| Optics and Optical Instruments - Environmental Requirements - Part 11: Optical Instruments for Outdoor Conditions of Use | |
| Optics and Optical Instruments - Environmental Requirements - Part 1: General Information, Definitions, Climatic Zones and Their Parameters | |
| Optics and Optical Instruments - Environmental Requirements - Part 4: Test Requirements for Telescopic Systems | |
| Optics and Optical Instruments - Environmental Requirements - Part 6: Test Requirements for Medical Optical Devices | |
| Optics and Optical Instruments - Environmental Requirements - Part 7: Test Requirements for Optical Measuring Instruments | |
| Optics and Optical Instruments - Environmental Requirements - Part 8: Test Requirements for Extreme Conditions of Use | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 13: Laser Irradiation Damage Threshold | |
| Optics and optical instruments Environmental requirements Part 12: Conditions of transport for optical instruments | |
| Optics and photonics - Guidance for the selection of environmental tests | |
| Optics and photonics \x97 Preparation of drawings for optical elements and systems \x97 Part 16: Diffractive surfaces | |
| Optique et instruments d'optique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 11: Donn\xe9es non tol\xe9ranc\xe9es RECTIFICATIF TECHNIQUE 1 | |
| Optique et instruments d'optique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 6: Tol\xe9rances de centrage RECTIFICATIF TECHNIQUE 1 | |
| Optique et instruments d\x92optique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 11: Donn\xe9es non tol\xe9ranc\xe9es | |
| Optique et instruments d\x92optique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 2: Imperfections des mat\xe9riaux - Bir\xe9fringence sous contrainte | |
| Optique et instruments d\x92optique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 3: Imperfections des mat\xe9riaux - Bulles et inclusions | |
| Optique et instruments d\x92optique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 4: Imperfections des mat\xe9riaux - H\xe9t\xe9rog\xe9n\x e9it\xe9 et stries | |
| Optique et instruments d\x92optique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 6: Tol\xe9rances de centrage | |
| Optique et instruments d\x92optique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 9: Traitement de surface et rev\xeatement | |
| Optique et photonique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 18: Bir\xe9fringence sous contrainte, bulles et inclusions, homog\xe9n\xe9it\xe9 , et stries | |
| Optique et photonique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 1: G\xe9n\xe9ralit\xe9s | |
| Optique et photonique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 5: Tol\xe9rances de forme de surface | |
| Optique et photonique - Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 7: Tol\xe9rances d'imperfection de surface | |
| Optique et photonique - Pr\xe9paration des dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 10: Tableau repr\xe9sentant les donn\xe9es d'\xe9l\xe9ments optiques et d'assemblages coll\xe9s | |
| Optique et photonique - Pr\xe9paration des dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 14: Tol\xe9rance de d\xe9formation du front d'onde | |
| Optique et photonique - Pr\xe9paration des dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 17: Seuil de dommage au rayonnement laser | |
| Optique et photonique - Pr\xe9paration des dessins pour \xe9l\xe9ments et syst\xe8mes optiques - Partie 19: Description g\xe9n\xe9rale des surfaces et des composants | |
| Optique et photonique - Pr\xe9paration des dessins pour \xe9l\xe9ments optiques et syst\xe8mes - Partie 12: Surfaces asph\xe9riques - AMENDEMENT 1 | |
| Optique et photonique \x97 Indications sur les dessins pour \xe9l\xe9ments et syst\xe8mes optiques \x97 Partie 8: \xc9tat de surface; rugosit\xe9 et ondulation | |
| Optique et photonique \x97 Pr\xe9paration des dessins pour \xe9l\xe9ments et syst\xe8mes optiques \x97 Partie 12: Surfaces asph\xe9riques | |
| Outillage de presse - Nez de presse - Partie 1: Type A | |
| Outillage de presse - Nez de presse - Partie 2: Type C | |
| Outillage de presse - Nez de presse - Partie 3: Type D | |
| Outillage de presse - Ressorts de compression \xe0 section rectangulaire - Dimensions d'encombrement et code de couleur | |
| Outillage de presse - Ressorts de compression \xe0 section rectangulaire - Dimensions d\x92encombrement et code de couleur AMENDEMENT 1 | |
| Outils de manoeuvre pour vis et \xe9crous - Cl\xe9s \xe0 fourche doubles - Longueurs des cl\xe9s et \xe9paisseurs des t\xeates | |
| Outils de manoeuvre pour vis et \xe9crous - Cl\xe9s polygonales doubles contre-coud\xe9es et contre-coud\xe9es profondes - Longueurs des cl\xe9s et \xe9paisseurs des t\xeates | |
| Outils de manoeuvre pour vis et \xe9crous - Cl\xe9s polygonales doubles, droites et inclin\xe9es - Longueurs des cl\xe9s et \xe9paisseurs des t\xeates | |
| Passenger car tyres \x97 Verifying tyre capabilities \x97 Laboratory test methods AMENDMENT 1 | |
| PERFORMANCE REQUIREMENTS FOR TEMPERATURE ACTUATED MIXING VALVES FOR HOT WATER DISTRIBUTION SYSTEMS | |
| Petits navires - Dispositifs \xe9lectriques - Dispositifs de protection contre la foudre | |
| Petits navires - Identification du bateau - Syst\xe8me de codage | |
| Petits navires - Installations aliment\xe9es en gaz de p\xe9trole liqu\xe9fi\xe9s (GPL) | |
| Petits navires - Manuel du propri\xe9taire AMENDEMENT 1 | |
| Petits navires - Manuel du propri\xe9taire | |
| Petits navires - Syst\xe8mes \xe0 carburant install\xe9s \xe0 demeure | |
| Petits navires - Syst\xe8mes \xe9lectriques - Installations \xe0 tr\xe8s basse tension \xe0 courant continu | |
| Photography - Processed Photographic Materials - Filing Enclosures for Storage | |
| Pipeline Product Recovery Equipment Using Projectiles | |
| Pipes and fittings made of crosslinked polyethylene (PE-X) \x97 Estimation of the degree of crosslinking by determination of the gel content AMENDMENT 1 | |
| Plain bearings Testing of bearing metals Resistance to corrosion by lubricants under static conditions | |
| Plastiques - Essais au feu - Sources d\x92allumage normalis\xe9es | |
| Plastiques - M\xe9thodes de pr\xe9paration des \xe9chantillons pour les essais de biod\xe9gradation des mat\xe9riaux plastiques | |
| Plastiques - R\xe9sines ph\xe9noliques - Classification et m\xe9thodes d'essai | |
| Pneumatiques pour motocycles - M\xe9thodes d\x92essai pour la v\xe9rification de l\x92aptitude des pneumatiques AMENDEMENT 1 | |
| Pneumatiques pour motocycles - M\xe9thodes d\x92essai pour la v\xe9rification de l\x92aptitude des pneumatiques | |
| Pneumatiques pour voitures particuli\xe8res - V\xe9rification de l'aptitude des pneumatiques - M\xe9thodes d'essai en laboratoire | |
| Ponts thermiques dans les b\xe2timents - Flux thermiques et temp\xe9ratures superficielles - Calculs d\xe9taill\xe9s | |
| Produits carbon\xe9s utilis\xe9s pour la production de l'aluminium - Coke cru et coke calcin\xe9 pour \xe9lectrodes - D\xe9termination de la masse volumique apparente (apr\xe8s tassement) | |
| Produits carbon\xe9s utilis\xe9s pour la production de l\x92aluminium - Coke calcin\xe9 - D\xe9termination de la stabilit\xe9 du grain par broyeur \xe0 billes oscillant | |
| Produits carbon\xe9s utilis\xe9s pour la production de l\x92aluminium - Coke calcin\xe9 - D\xe9termination de la teneur en hydrog\xe8ne r\xe9siduel | |
| Protections de t\xeate et de visage destin\xe9es \xe0 \xeatre utilis\xe9es en hockey sur glace | |
| Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for ice hockey players | |
| Qualit\xe9 de l'eau - Essai d'inhibition de la croissance des algues marines avec Skeletonema costatum et Phaeodactylum tricornutum | |
| Qualit\xe9 de l\x92eau - D\xe9termination de la toxicit\xe9 \xe0 long terme de substances vis-\xe0-vis d\x92un poisson d\x92eau douce - M\xe9thode d\x92\xe9valuation des effets de substances sur le taux de croissance... | |
| Qualit\xe9 de l\x92eau - Dosage des hydrocarbures halog\xe9n\xe9s hautement volatils - M\xe9thodes par chromatographie en phase gazeuse | |
| Qualit\xe9 de l\x92eau - Mesurage des param\xe8tres biochimiques - Dosage spectrometrique de la chlorophylle a | |
| R\xe9cipients m\xe9talliques l\xe9gers - Bo\xeetiers trois pi\xe8ces, \xe0 r\xe9treints, en acier, pour a\xe9rosols - Dimensions de la partie sup\xe9rieure | |
| R\xe9cipients m\xe9talliques l\xe9gers \xe0 usage g\xe9n\xe9ral - Volumes nominaux de remplissage des r\xe9cipients ronds cylindriques et tronconiques de volume inf\xe9rieur ou \xe9gal \xe0 40 000 ml | |
| Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems | |
| Recommended Practice for Specifying Electric Submersible Pump Cable\x97Ethylene\x9 6Propylene Rubber Insulation | |
| Recommended Practice for Specifying Electric Submersible Pump Cable\x97Polypropyle ne Insulation | |
| Recommended Practice for Testing of Electric Submersible Pump Cable | |
| RECOMMENDED PROGRAMMING PRACTICES TO FACILITATE THE PORTABILITY OF SCIENTIFIC COMPUTER PROGRAMS | |
| Reinforcement Materials - Tubular Braided Sleeves - Basis for a Specification | |
| Rev\xeatements m\xe9talliques et autres rev\xeatements inorganiques - Mesurage de la masse surfacique - Pr\xe9sentation des m\xe9thodes d'analyse gravim\xe9trique et chimique | |
| Robot-based Automation Systems | |
| Robots et dispositifs robotiques - Exigences de s\xe9curit\xe9 pour les robots industriels - Partie 2: Syst\xe8mes robots et int\xe9gration | |
| Robots pour environnements industriels - Exigences de s\xe9curit\xe9 - Partie 1: Robot RECTIFICATIF TECHNIQUE 1 | |
| Robots pour environnements industriels \x97 Exigences de s\xe9curit\xe9 \x97 Partie 1: Robot | |
| Rolling Bearings, linear motion, recirculation ball, sleeve type-Metric series | |
| Root Canal Instruments: General Requirements | |
| Roulements - Roulements lin\xe9aires \xe0 recirculation de billes, type manchon - Dimensions d\x92encombrement et tol\xe9rances AMENDEMENT 1 | |
| Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections | |
| Single-use sterile rubber surgical gloves \x97 Specification TECHNICAL CORRIGENDUM 1 | |
| Single-Use Sterile Surgical Rubber Gloves - Specification | |
| Skis de fond - Zone de montage de la fixation - Exigences pour les vis d'essai | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - Indications sur les dessins pour pi\xe8ces moul\xe9es dans la documentation technique de produits (TPD) | |
| Specification for unused polybutenes | |
| Specifications for silicone liquids for electrical purposes | |
| Standard for Fire and Emergency Services Analyst Professional Qualifications | |
| Standard for Fire and Emergency Services Instructor, Fire Officer, and Emergency Medical Services Officer Professional Qualifications | |
| Standard for Futurebus+trademark/ VME64 Bridge | |
| Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures | |
| Standard for Software Reviews and Audits | |
| Standard for Waveform and Vector Exchange (WAVES) | |
| Standard on Professional Qualifications for Firefighters | |
| Stationary Source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications | |
| Stationary source emissions \x97 Automated monitoring of mass concentrations of particles \x97 Performance characteristics, test methods and specifications TECHNICAL CORRIGENDUM 1 | |
| Steel for the Reinforcement of Concrete - Determination of Strength of Joints in Welded Fabric | |
| Supplement to IEEE Standard for Software Verification and Validation: Content Map to IEEE/EIA 12207.1-1997 | |
| Syst\xe8mes d'approvisionnement par concentrateurs d'oxyg\xe8ne pour utilisation dans des r\xe9seaux de distribution de gaz m\xe9dicaux | |
| Technical Collection 1993 (1st Edition) (E) | |
| Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of Drawings | |
| Technical Product Documentation - Vocabulary - Part 2: Terms Relating to Projection Methods | |
| Technical Product Documentation - Vocabulary - Part 4: Terms Relating to Construction Documentation | |
| Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation | |
| Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation \x97 Part 3: Classification system for GPACDs applied to treatment of outdoor air | |
| Testing and Rating of Electrical Submersible Pump Motors | |
| Textiles - Cotton Yarns - Specifications | |
| Textiles - Textured Filament Yarn - Definitions | |
| Thermal Bridges in Building Construction - Calculation of Heat Flows and Surface Temperatures - Part 2: Linear Thermal Bridges | |
| Thermal Bridges in Building Construction - Heat Flows and Surface Temperatures - Part 1: General Calculation Methods | |
| Tobacco and Tobacco Products - Vocabulary | |
| Total Chloride in Liquid Hydrocarbons by Wavelength Dispersive X-Ray Fluorescence | |
| Total Mercury in Solids | |
| Trace BTEX Impurities in LPG Samples by Gas Chromatography | |
| Transmissions hydrauliques - V\xe9rins - Essais de r\xe9ception AMENDEMENT 1 | |
| Transmissions hydrauliques - V\xe9rins - Essais de r\xe9ception | |
| Transmissions pneumatiques - Appareils \xe9lectropneumatiqu es de distribution \xe0 commande continue de pression - Partie 2: M\xe9thodes d'essai pour d\xe9terminer les principales caract\xe9ristiques \xe0 inclure dans la documentation des fournisseurs... | |
| Transmissions pneumatiques - V\xe9rins - Crit\xe8res de r\xe9ception et de v\xe9rification finale | |
| Transmissions pneumatiques \x97 Appareils \xe9lectropneumatiqu es de distribution \xe0 commande continue de pression \x97 Partie 1: Principales caract\xe9ristiques \xe0 inclure dans la documentation des fournisseurs | |
| Tubes en poly\xe9thyl\xe8ne r\xe9ticul\xe9 (PE-X) - Influence du temps et de la temp\xe9rature sur la r\xe9sistance esp\xe9r\xe9e | |
| Tubes et raccords en poly\xe9thyl\xe8ne r\xe9ticul\xe9 (PE-X) - Estimation du degr\xe9 de r\xe9ticulation par le mesurage du taux de gel | |
| UL Standard for Safety Medium-Voltage Transfer Switches | |
| UL Standard for safety Solid-State Transfer Switches | |
| UL Standard for Safety Transfer Switch Equipment, Meter-Mounted | |
| UL Standard for Safety Transfer Switch Equipment | |
| Unitized Equipment for Automated Milking Installations | |
| Verre dans la construction - Calcul du coefficient de transmission thermique U, en r\xe9gime stationnaire des vitrages multiples | |
| Verre dans la construction - D\xe9termination du coefficient de transmission thermique U, en r\xe9gime stationnaire des vitrages multiples - M\xe9thode de la plaque chaude gard\xe9e | |
| Verre dans la construction - D\xe9termination du coefficient de transmission thermique, U, en r\xe9gime stationnaire des vitrages multiples - M\xe9thode du fluxm\xe8tre | |
| Verre et verrerie - Analyse des solutions d\x92attaque - Partie 1: Dosage du dioxyde de silicium par spectrom\xe9trie d\x92absorption mol\xe9culaire | |
| Verre et verrerie - Analyse des solutions d\x92attaque - Partie 2: Dosage de l\x92oxyde de sodium et de l\x92oxyde de potassium par spectrom\xe9trie d\x92\xe9mission de flamme ou d\x92absorption dans la... | |
| Verre et verrerie - Analyse des solutions d\x92attaque - Partie 3: Dosage de l\x92oxyde de calcium et de l\x92oxyde de magn\xe9sium par spectrom\xe9trie d\x92absorption atomique dans la flamme | |
| Verre et verrerie - Analyse des solutions d\x92attaque - Partie 4: Dosage de l\x92oxyde d\x92aluminium par spectrom\xe9trie d\x92absorption mol\xe9culaire | |
| Verre et verrerie - Analyse des solutions d\x92attaque - Partie 5: Dosage de l\x92oxyde de fer(M) par spectrom\xe9trie d\x92absorption mol\xe9culaire et par spectrom\xe9trie d\x92absorption atomique dans la flamme | |
| Verre et verrerie - Analyse des solutions d\x92attaque - Partie 6: Dosage de l\x92oxyde de bore(M) par spectrom\xe9trie d\x92absorption mol\xe9culaire | |
| Wireline Diamond Core Drilling Equipment - System A - Part 1: Metric Units | |
| Wireline Diamond Core Drilling Equipment - System A - Part 2: Inch Units | |
| Wireline Diamond Core Drilling Equipment - System CSSK |
| << Prev | Next >> |