AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Acceptance conditions for general purpose parallel lathes -- Testing of the accuracy | |
| AERIALS FOR THE RECEPTION OF SOUND AND TELEVISION BROADCASTING IN THE FREQUENCY RANGE 30 MHZ TO 1 GHZ. PART 3: METHODS OF MEASUREMENT OF MECHANICAL PROPERTIES, VIBRATION AND ENVIRONMENTAL TESTS. | |
| AERIALS FOR THE RECEPTION OF SOUND AND TELEVISION BROADCASTING IN THE FREQUENCY RANGE 30 MHZ TO 1 GHZ. PART 4: GUIDE FOR THE PREPARATION OF AERIAL PERFORMANCE SPECIFICATIONS. DETAILED SPECIFICATION... | |
| Agricultural irrigation equipment — Meters for irrigation water | |
| Air quality -- Determination of the uncertainty of the time average of air quality measurements | |
| Ambient air -- Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography (ISO 16362:2005) | |
| Ambient air -- Determination of sulfur dioxide -- Ultraviolet fluorescence method (ISO 10498:2004) | |
| Ambient air -- Gas phase titration -- Calibration of analysers for ozone | |
| Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method | |
| Assembly tools for screws and nuts -- Drive ends for hand- and machine-operated screwdriver bits and connecting parts -- Dimensions, torque testing | |
| Assembly tools for screws and nuts -- Driving squares -- Part 1: Driving squares for hand socket tools | |
| Assembly tools for screws and nuts -- Driving squares -- Part 2: Driving squares for power socket tools | |
| Assembly tools for screws and nuts. Double-ended wrenches. Size pairing. | |
| Assessment service delivery — Procedures and methods to assess people in work and organizational settings — Part 1: Requirements for the client | |
| Assessment service delivery — Procedures and methods to assess people in work and organizational settings — Part 2: Requirements for service providers | |
| Assessment service delivery. Procedures and methods to assess people in work and organizational settings. Part 1: Requirements for the client. | |
| Assessment service delivery. Procedures and methods to assess people in work and organizational settings. Part 2: Requirements for the service providers. | |
| Building construction machinery and equipment - Terms and definitions (ISO 11375:1998) | |
| Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide | |
| Cigarettes -- Determination of water in smoke condensates -- Part 1: Gas-chromatographic method. | |
| Cigarettes -- Monitor test piece -- Requirements and use. | |
| Cigarettes. Det of water in smoke condensates -- Part 2: Karl Fischer method | |
| Cigarettes. Determinación of water in smoke condensates. Part 2: Karl Fischer method. | |
| Cigarettes. Determination of menthol in smoke condensates. Gas-chromatographic method | |
| Cigarettes. Determination of nicotine in smoke condensates. Gas chromatography method. | |
| Cigarettes. Determination of nicotine in smoke condensates. Gas-chromatographic method | |
| Climate change management — Transition to net zero — Part 1: Carbon neutrality | |
| Coaxial communication cables - Part 6-5: Detail specification for Type A quad-shield CATV drop cables with screening class A++ | |
| Condensed aerosol fire extinguishing systems.Requirements and test methods for components and system design, installation and maintenance. General requirements | |
| Cork stoppers. Determination of global migration. (ISO 10106:2003) | |
| Cork stoppers. Determination of global migration. | |
| Corrugating medium. Determination of the edge crush resistance after laboratory fluting | |
| Cosmetics. Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products -- Part 2: Criteria for ingredients and products. | |
| Dehydrated green pepper (Piper nigrum L.). Spécification. | |
| Dependability management - Part 3-10: Application guide - Maintainability | |
| DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2). BASE STATION SYSTEM (BSS) EQUIPMENT SPECIFICATION. PART 1: RADIO ASPECTS (GSM 11.21 VERSION 4.8.1). | |
| DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); APPROVAL TEST SPECIFICATION. (Endorsed by AENOR in December of 1997.) | |
| Dried rosemary (Rosmarinus officinalis L.). Specification. | |
| Dried sage (Salvia officinalis L.). Specification. | |
| Dried sweet basil (Ocimum basilicum L.). Specification. | |
| Dried sweet marjoram (Origanum majorana L.). Specification. | |
| Earth-moving machinery — Product identification numbering system | |
| Earth-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 2: Performance criteria. (ISO 14401-2:2004) | |
| Earth-moving machinery -- Braking systems of pedestrian-controlle d machines -- Performance requirements and test procedures. | |
| Earth-moving machinery -- Crawler machines -- Performance requirements and test procedures for braking systems | |
| Earth-moving machinery -- Determination of average ground contact pressure for crawler machines | |
| Earth-moving machinery -- Field of vision of surveillance and rear-view mirrors -- Part 1: Test methods | |
| Earth-moving machinery -- Field of vision of surveillance and rear-view mirrors -- Part 2: Performance criteria | |
| Earth-moving machinery -- Hazard detection systems and visual aids -- Performance requirements and tests | |
| Earth-moving machinery -- Key-locked starting systems | |
| Earth-moving machinery -- Laboratory tests and performance requirements for protective structures of excavators -- Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t | |
| Earth-moving machinery -- Lifting and tying-down attachment points -- Performance requirements | |
| Earth-moving machinery -- Lighting, signalling and marking lights, and reflex-reflector devices (ISO 12509:2004) | |
| Earth-moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load | |
| Earth-moving machinery -- Machine-control systems (MCS) using electronic components -- Performance criteria and tests for functional safety | |
| Earth-moving machinery -- Operator enclosure environment - Part 1: Terms and definitions | |
| Earth-moving machinery -- Operator enclosure environment -- Part 2: Air filter element test method | |
| Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method | |
| Earth-moving machinery -- Operator enclosure environment -- Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance | |
| Earth-moving machinery -- Operator enclosure environment -- Part 5: Windscreen defrosting system test method | |
| Earth-moving machinery -- Operator enclosure environment -- Part 6: Determination of effect of solar heating | |
| Earth-moving machinery -- Recyclability and recoverability -- Terminology and calculation method | |
| Earth-moving machinery and mobile road construction machinery -- Worksite data exchange -- Part 1: System architecture | |
| Earth-moving machinery and mobile road construction machinery -- Worksite data exchange -- Part 2: Data dictionary | |
| Earth-moving machinery. Hydraulic excavators. Laboratory test and performance requirements for operator protective guards. | |
| Earth-moving machinery. Hydraulic excavators. Lift capacity. | |
| Earth-moving machinery. Lift arm support devices. (ISO 10534:1993 + ISO 10533:1993/Amd. 1:2005) | |
| Earth-moving machinery. Loaders and backhoe loaders. Part 2: Test method for measuring breakout forces and lift capacity to maximum likft height. | |
| Earth-moving machinery. Safety requirements for remote operator control systems | |
| Effects of current on human beings and livestock - Part 1: General aspects. | |
| Effects of current on human beings and livestock - Part 1: General aspects | |
| Effects of current on human beings and livestock - Part 2: Special aspects | |
| Electric cables - Accessories - Material characterisation - Part 1: Fingerprinting and type tests for resinous compounds | |
| Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications | |
| Electric cables - Accessories - Material characterisation - Part 3: Fingerprinting for heat shrinkable components for medium voltage applications from 3,6/6 (7,2) kV up to 20,8/36 (42) kV | |
| Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) (Endorsed by AENOR in August of 2002.) | |
| Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) (Endorsed by AENOR in November of 2003.) | |
| Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) (Endorsed by AENOR in November of 2010.) | |
| Electrical cables - Accessories - Material characterisation - Part 4: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV | |
| Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology | |
| Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports | |
| Electrical installations in ships - Part 101: Definitions and general requirements | |
| Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories | |
| Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications | |
| Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables | |
| Electrical installations in ships - Part 352: Choice and installation of electrical cables | |
| Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV | |
| Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U m = 7,2 kV) up to 30 kV... | |
| Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables | |
| Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) | |
| Electrical installations in ships - Partie 202: System design - Protection | |
| Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results | |
| Electromagnetic compatibility (EMC) - Part 3: Limits - Section 6: Assessment of emission limits for distorting loads in MV and HV power systems - Basic EMC publication | |
| Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests | |
| Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests | |
| Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests | |
| Electronic archiving. Part 1: Specifications concerning the design and the operation of an information system for electronic information preservation. | |
| Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault | |
| Environmental aspects - Inclusion in electrotechnical product standards | |
| Environmental information. Competence requirements for teams validating and verifying environmental information | |
| Environmental labels and declarations. Type III environmental declarations. Principles and procedures (ISO 14025:2006) | |
| Environmental management — Guidelines on the assurance of environmental reports. | |
| Environmental management -- Guidelines for establishing good practices for combatting land degradation and desertification -- Part 1: Good practices framework | |
| Environmental management -- Water footprint -- Principles, requirements and guidelines | |
| Environmental management systems — Guidelines for incorporating material circulation in design and development. | |
| Environmental management systems. General guidelines or principles, systems and support techniques (ISO 14004:2004) | |
| Environmental management. Environmental communication. Guidelines and examples. (ISO 14063:2006) | |
| Environmental management. Quantitative environmental information. Guidelines and examples | |
| Environmental management. Vocabulary | |
| Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence | |
| Equipment reliability testing. Part 3: Preferred test conditions. Indoor portable equipment - Low degree of simulation | |
| Essential oil of bitter fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare) | |
| Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions | |
| Fibre-reinforced plastics -- Methods of producing test plates -- Part 2: Contact and spray-up moulding | |
| Fibre-reinforced plastics -- Methods of producing test plates -- Part 3: Wet compression moulding | |
| Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs | |
| Fibre-reinforced plastics -- Methods of producing test plates -- Part 5: Filament winding | |
| Fibre-reinforced plastics -- Methods of producing test plates -- Part 6: Pultrusion moulding | |
| Fibre-reinforced plastics. Methods of producing test plates. Part 10: Injection moulding of BMC and other long-fibre moulding compounds. General principles and moulding of multipurpose test specimens | |
| Fibre-reinforced plastics. Methods of producing test plates. Part 11: Injection moulding of BMC and other long-fibre moulding compounds. Small plates | |
| Fibre-reinforced plastics. Methods of producing test plates. Part 7: Resin transfer moulding | |
| Fibre-reinforced plastics. Methods of producing test plates. Part 8: Compression moulding of SMC and BMC | |
| Fibre-reinforced plastics. Methods of producing test plates. Part 9: Moulding of GMT/STC | |
| Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 1: Sampling | |
| Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing | |
| Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 3: Determination of total particulate matter of smoking articles using a routine analytical... | |
| Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General | |
| Fire safety engineering.Selectio n of design fire scenarios and design fires.Part 1: Selection of design fire scenarios | |
| Fork-lift trucks. Fork-arm extensions and telescopic fork arms. Technical characteristics and strength requirements | |
| Fuel cell technologies - Part 1: Terminology | |
| Gas analysis -- Handling of calibration gases and gas mixtures -- Guidelines. (ISO 16664:2004) | |
| GEDI -- Generic Electronic Document Interchange (ISO 17933:2000) | |
| Ginger and its oleoresins. Determination of the main pungent components (gingerols and shogaols). Method using high-performance liquid chromatography. | |
| Goodness-of-fit tests, confidence intervals and lower confidence limits for Weibull distributed data | |
| Graphic technology — Management of security printing processes — Amendment 1: Climate action changes | |
| Graphic technology -- Process control for the production of half-tone colour separations, proof and production prints -- Part 2: Offset lithographic processes | |
| Graphic technology. Determination of tack of paste inks and vehicles by a rotary tackmeter | |
| Graphic technology. Management of security printing processes | |
| Graphic technology. Plates for Offset printing. Dimensions. | |
| Graphic technology. Prepress digital data exchange. Guidelines and principles for de development of PDF/X standards (ISO 15929:2002) | |
| Graphic technology. Prints and printing inks. Assessment of light fastness using filtered xenon arc light | |
| Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Part 5: Screen printing (ISO 12647-5:2001) | |
| Graphic technology. Process control for the manufacture of half-tone colour separations, proofs and production prints. Part 2: Offset lithographic processes. | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 1: Parameters and measurement methods. | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 2: Offset lithographic processes. (ISO 12647-2:2004) | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 4: Publication gravure printing | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 5: Screen printing. | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 6: Flexographic printing. | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 7: Proofing processes working directly from digital data. | |
| Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 8: validation print processes working directly from digital data. | |
| Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Part 3: Coldset offset lithography on newsprint. | |
| Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Part 6: Flexographic printing. | |
| Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Part 6: Flexographic printing | |
| Graphic technology. Process control for the production of halftone colour separations, proof and production prints. Part 7: Proofing processes working directly from digital data | |
| Graphic technology. Requirements for colour soft proofing systems | |
| Graphic technology. Testing of prints. Visual lustre. (ISO 15994:2005) | |
| Graphic tecnology. Displays for color proofing. Characteristics | |
| Greenhouse gas management and related activities. Framework and principles for methodologies on climate actions | |
| Greenhouse gases -- Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals | |
| Greenhouse gases -- Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions | |
| Greenhouse gases -- Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition. (ISO 14065:2007) | |
| Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification teams. | |
| Greenhouse gases. Par 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancement. | |
| Guidelines for the selection of quality management system consultants and use of their services | |
| Guidelines for treated wastewater use for irrigation projects -- Part 1: The basis of a reuse project for irrigation. | |
| Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products -- Part 1: Definitions for ingredients | |
| Guidelines on the application of ISO 9001:2000 for the food and drink industry. | |
| High voltage test techniques - Measurement of partial discharges by electromagnetic and acoustic methods | |
| High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV | |
| High-voltage switchgear and controlgear - Part 37-013: Alternating current generator circuit-breakers | |
| HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test | |
| Hydrogen fuel. Product specification (ISO 14687:1999 + ISO 14687:1999/Cor. 1:2001) | |
| Hydrogen generators using fuel processing technologies -- Part 1: Safety | |
| Indoor air — Part 40: Indoor air quality management system — Amendment 1: Climate action changes | |
| Indoor air -- Part 4: Determination of formaldehyde -- Diffusive sampling method. (ISO 16000-4:2004) | |
| Indoor air -- Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID. | |
| Indoor air. Part 40: Indoor air quality management system. | |
| Indoor air. Part 4: Determination of formaldehyde -- Diffusive sampling method | |
| Indoor air. Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or... | |
| Information and documentation — Digital records conversion and migration process | |
| Information and documentation — International standard identifier for libraries and related organizations (ISIL) | |
| Information and documentation — Methods and procedures for assessing the impact of libraries | |
| Information and documentation — Processes and functional requirements for software for managing records — Part 1: Functional requirements and associated guidance for any applications that manage digital records | |
| Information and documentation — The Dublin Core metadata element set — Part 1: Core elements | |
| Information and documentation — The Dublin Core metadata element set — Part 2: DCMI Properties and classes | |
| Information and documentation - Trusted third party repository for digital records | |
| Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 1: Overview and statement of principles | |
| Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 2: Guidelines and functional requirements for digital records management systems | |
| Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 3: Guidelines and functional requirements for records in business systems | |
| Information and documentation. Digital records conversion and migration process. | |
| Information and documentation. Records management . Part 1: General. | |
| Information and documentation. Requirements for binding of books, periodicals, serials and other paper documents for archive and library use. Methods and materials | |
| Information and documentation. The Dublin Core Metadata Element Set (ISO 15836:2003) | |
| Information and documentation. The Dublin Core Metadata Element Set (ISO 15836:2009) | |
| Instrument transformers - Part 102: Ferroresonance oscillations in substations with inductive voltage transformers | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values | |
| INTEGRATED SERVICES DIGITAL NETWORK (ISDN). TELEPHONY TERMINAL. PAYPHONES. | |
| International Electrotechnical Vocabulary (IEV) - Part 103: Mathematics - Functions | |
| International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units | |
| International Electrotechnical Vocabulary (IEV) - Part 113: Physics for electrotechnology | |
| International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases | |
| International Electrotechnical Vocabulary (IEV) - Part 351: Control technology | |
| International Electrotechnical Vocabulary (IEV) - Part 393: Nuclear instrumentation - Physical phenomena and basic concepts | |
| International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors | |
| International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery | |
| International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres | |
| International Electrotechnical Vocabulary (IEV) - Part 445: Time relays | |
| International Electrotechnical Vocabulary (IEV) - Part 447: Measuring relays | |
| International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables | |
| International Electrotechnical Vocabulary (IEV) - Part 471: Insulators | |
| International Electrotechnical Vocabulary (IEV) - Part 485: Fuel cell technologies | |
| International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment | |
| International Electrotechnical Vocabulary (IEV) - Part 617: Organization/Market of electricity | |
| International Electrotechnical Vocabulary (IEV) - Part 651: Live working | |
| International Electrotechnical Vocabulary (IEV) - Part 732: Computer network technology | |
| International Electrotechnical Vocabulary (IEV) - Part 802: Ultrasonics | |
| International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding | |
| International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors. | |
| International Electrotechnical Vocabulary - Part 732: Computer network technology | |
| International Electrotechnical Vocabulary. Part 617: Organisation/market of electricity | |
| Large cardamom (Amomum subulatum Roxb.), as capsules and seeds. Specification. | |
| Latex, rubber -- Determination of total solids content | |
| Leaf tobacco -Determination of Strip particle size. | |
| Live working - Guidelines for the installation of transmission and distribution line conductors and earth wires - Stringing equipment and accessory items | |
| Low-voltage electrical installations - Part 7-713: Requirements for special installations or locations - Furniture | |
| Machine tools. Conditions for machining centres. Part 10:Determination of thermal distorsions | |
| Marine energy - Wave, tidal and other water current converters - Part 1: Terminology | |
| Marine energy - Wave, tidal and other water current converters - Part 1: Vocabulary. | |
| MATERIAL CHARACTERISATION. PART 1: COMPOUNDS FOR USE IN CABLE ACCESSORIES: RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE. | |
| MATERIALS USED IN COMMUNICATION CABLES. PART 8: FILLING COMPOUNDS FOR FILLED CABLES. | |
| MATERIALS USED IN COMMUNICATION CABLES. PART 9: CROSS-LINKED PE INSULATION COMPOUNDS. | |
| Medical laboratories — Requirements for safety | |
| Meters for irrigation water | |
| Microbiology of food and animal feeding stuffs -- Carcass sampling for microbiological analysis | |
| Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli -- Part 1: Colony-count technique at 44 degrees C using membranes and... | |
| Mobile and fixed offshore units - Electrical installations - Part 4: Cables | |
| Multicore and multipair cable for installation above and below ground. (Endorsed by AENOR in March of 2001.) | |
| MULTICORE AND MULTIPAIR CABLE FOR INSTALLATION ABOVE AND BELOW GROUND. | |
| Multicore and multipair cables for installation above and below ground (Endorsed by AENOR in August of 2006.) | |
| MULTICORE AND MULTIPAIR CABLES FOR INSTALLATIONS ABOVE AND BELOW GROUND. | |
| Mustard seeds. Specifications. | |
| Natural rubber latex concentrate — Determination of dry rubber content | |
| Natural rubber latex concentrate. Determination of alkalinity | |
| Overhead distribution cables of rated voltage U0/U(Um): 0,6/1 (1,2) kV (Endorsed by Asociación Española de Normalización in December of 2025.) | |
| OVERHEAD DISTRIBUTION CABLES OF RATED VOLTAGE UO/U(UM): 0,6/1 (1,2) KV (Endorsed by AENOR in June of 1998.) | |
| OVERHEAD DISTRIBUTION CABLES OF RATED VOLTAGE UO/U(UM): 0,6/1 (1,2) KV. (Endorsed by AENOR in December of 1997.) | |
| Pallets for materials handling -- Quality of fasteners for assembly of new and repair of used, flat, wooden pallets | |
| Paper and board - Determination of z-directional tensile strength | |
| Paper and board - Testing of cores - Part 9: Determination of flat crush resistance | |
| Paper and board - Testing of cores. Part 4: Measurement of dimensiones | |
| Paper and board -- Specification for internal diameters of cores for reels. | |
| Paper and board. Determination of alkali reserve | |
| Paper and board. Determination of CIE whiteness CIE, C/2º (indoor illumination conditions) | |
| Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight) | |
| Paper and board. Determination of compressive strength. Ring crush method | |
| Paper and board. Determination of grease resistance. Part 1: Permeability test | |
| Paper and board. Determination of grease resistance. Part 2: Surface repellency test | |
| Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers | |
| Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method | |
| Paper and board. Testing of cores. Part 2: Conditioning of test samples | |
| Paper and board. Testing of cores. Part 6: Determination of bending strength by the three-point method | |
| Paper, board and corrugated fibreboard -- Description and calibration of compression-testing equipment | |
| Paper, board, pulps and cellulose nanomaterials. Determination of residue (ash content) on ignition at 525 °C | |
| Pepper and pepper oleoresins. Determination of piperine content. Method using high-performance liquid chromatography. | |
| Peppercorns (piper nigrum L.) in brine. Specification and test methods. | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications. | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications | |
| Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials | |
| Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers | |
| Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers | |
| Plastics piping systems. Multilayer pipes. Test method for the adhesion of the different layers using a pulling rig. (ISO 17454:2006) | |
| Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint. | |
| Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESORIES FOR RATED VOLTAGES ABOVE 36 KV (UM = 42 KV) UP TO 150 KV (UM = 170 KV). PART 0: CONTENTS. | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESORIES FOR RATED VOLTAGES ABOVE 36 KV (UM = 42 KV) UP TO 150 KV (UM = 170 KV). PART 1: GENERAL TEST... | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESORIES FOR RATED VOLTAGES ABOVE 36 KV (UM = 42 KV) UP TO 150 KV (UM = 170 KV). PART 3: TEST REQUIREMENTS... | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESORIES FOR RATED VOLTAGES ABOVE 36 KV (UM = 42 KV) UP TO 150 KV (UM = 170 KV). PART 5: TEST REQUIREMENTS... | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESORIES FOR RATED VOLTAGES ABOVE 36 KV (UM = 42 KV) UP TO 150 KV (UM = 170 KV). PART 6: TEST REQUIREMENTS... | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESORIES FOR RATED VOLTAGES ABOVE 36 KV (UM = 42 KV) UP TO 150 KV (UM = 170 KV). PART 8: TEST REQUIREMENTS... | |
| Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV) (Endorsed by AENOR in... | |
| Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV). Part 1: General test... | |
| Power transformers - Part 10-1: Determination of sound levels - Application guide | |
| Power transformers - Part 12: Loading guide for dry-type power transformers | |
| Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials | |
| Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers. | |
| Power transformers - Part 7: Loading guide for oil-immersed power transformers | |
| Pulp, paper and board -- Determination of total chlorine and organically bound chlorine | |
| Quality managemen. Customer satisfaction. Guidelines for monitoring and measuring | |
| Quality management — Guidance for documented information | |
| Quality management — Guidance for quality tools and their application | |
| Quality management — Guidance on statistical techniques for ISO 9001:2015 | |
| Quality management — Guidance to understand, evaluate and improve organizational quality culture | |
| Quality management — Guidelines for competence management and people development | |
| Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations | |
| Quality management - Customer satisfaction -- Guidelines for codes of conduct for organizations | |
| Quality management -- Customer satisfaction -- Guidelines for codes of conduct for organizations | |
| Quality management -- Customer satisfaction -- Guidelines for complaints handling in organizations | |
| Quality management -- Customer satisfaction -- Guidelines for dispute resolution external to organizations | |
| Quality management -- Customer satisfaction -- Guidelines for monitoring and measuring | |
| Quality management -- Guidelines for quality management in projects | |
| Quality management -- Guidelines for realizing financial and economic benefits. (ISO 10014:2006) | |
| Quality management -- Guidelines for realizing financial and economic benefits. (ISO 10014:2006/Cor.1:200 7) | |
| Quality management systems — Guidelines for quality plans | |
| Quality management systems — Managing an organization for quality results — Guidance for realizing financial and economic benefits | |
| Quality management systems -- Guidelines for configuration management (ISO 10007:2003) | |
| Quality management systems. Guidelines for quality plans | |
| Quality management. Customer satisfaction. Guidelines for complaints handling in organizations | |
| Quality management. Guidance for people engagement | |
| Quality management. Guidelines for configuration management | |
| Quality management. Guidelines on people involvement and competence | |
| Quantitative methods in process improvement -- Six Sigma -- Part 1: DMAIC methodology | |
| Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques | |
| RADIO EQUIPMENT AND SYSTEMS (RES). LAND MOBILE SERVICE. TECHNICAL CHARACTERISTICS AND TEST CONDITIONS FOR RADIO EQUIPMENT TRANSMITTING SIGNALS TO INITIATE A SPECIFIC RESPONSE IN THE RECEIVER. | |
| RADIO EQUIPMENT AND SYSTEMS (RES). SHORT RANGE DEVICES (SRDS). TECHNICAL CHARACTERISTICS AND TEST METHODS FOR RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS... | |
| RADIO EQUIPMENT AND SYSTEMS (RES). SHORT RANGE DEVICES. TECHNICAL CHARACTERISTICS AND TEST METHODS FOR RADIO EQUIPMENT TO BE USED IN THE 1 GHZ TO 25 GHZ FREQUENCY RANGE. | |
| RADIO EQUIPMENT AND SYSTEMS (RES). SHORT RANGE DEVICES. TECHNICAL CHARACTERISTICS AND TEST METHODS FOR RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1 000 MHZ FREQUENCY RANGE WITH... | |
| RADIO EQUIPMENT AND SYSTEMS (RES). TECHNICAL CHARACTERISTICS AND TEST METHODS FOR WIRELESS MICROPHONES IN THE 25 MHZ TO 3 GHZ FREQUENCY RANGE. | |
| RADIO EQUIPMENT AND SYSTEMS (RES). TECHNICAL CHARACTERISTICS, TEST CONDITIONS AND METHOD OF MEASUREMENT FOR RADIO ASPECTS OF CORDLESS TELEPHONES CT1. | |
| Radio frequency identification of animals -- Code structure | |
| Radio-frequency identification of animals. Technical concept. | |
| RECOMMENDED METHODS OF MEASUREMENT ON RECEIVERS FOR FREQUENCY-MODULATION BROADCAST TRANSMISSIONS. (Endorsed by AENOR in May of 1995.) | |
| Recreational diving services -- Requirements for introductory training programmes to scuba diving | |
| Recreational diving services -- Requirements for training programmes on enriched air nitrox (EAN) diving | |
| Refrigerated light hydrocarbon fluids -- Liquefied natural gas -- Procedure for custody transfer on board ship | |
| Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Microwave-type level gauge. | |
| Refrigerated light-hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Float-type level gauges | |
| Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses | |
| Rigid cellular plastics. Determination of flexural properties. Part 1: Basic bending test | |
| Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity | |
| Road traffic signal systems. | |
| Road traffic signal systems | |
| Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 1: Physical layer. (ISO 14230-1:2006) | |
| Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology | |
| Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources | |
| Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage. | |
| Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage. | |
| Road vehicles. Diagnostic communication over K-Line (DoK-Line). Part 1: Physical layer. | |
| Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 1: General. | |
| Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 2: Electrical loads. | |
| Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 3: Mechanical loads | |
| Road vehicles. LED lamps characteristics for bulb compatible failure detection. Part 1: LED lamps used as director indicators | |
| Road vehicles. Vehicle dynamics test methods. Part 1: General conditions for passenger cars. | |
| Rubber and latices. Nomenclature | |
| Rubber and rubber additives. Determination of total sulfur content using a automatic analyser | |
| Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number | |
| Rubber compounding ingredients — Carbon black — Determination of loss on heating | |
| Rubber compounding ingredients. Carbon black (pelletized). Determination of pour density | |
| Rubber compounding ingredients. Carbon black. Determination of ash | |
| Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number. | |
| Rubber compounding ingredients. Carbon black. Determination of loss on heating | |
| Rubber compounding ingredients. Carbon black. Determination of sulfur content | |
| Rubber latex — Sampling | |
| Rubber, natural latex concéntrate. Determination of KOH number | |
| Rubber, natural latex concentrate -- Determination of KOH number | |
| Rubber, raw natural and raw synthetic — Sampling and further preparative procedures | |
| Rubber, vulcanised or thermoplastic. Resistance to ozone cracking. Part 1: Static and dynamic strain testing | |
| Rubber, vulcanized or thermoplastic -- Determination of low temperature stiffening (Gehman test) | |
| Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Part 1: Static and dynamic strain testing | |
| Rubber, vulcanized or thermoplastics. Determination of flex cracking and crack growth (De Mattia). | |
| Rubber. Determination of carbon black content. Pyrolytic and chemical degradation methods | |
| Rubber. Determination of solvent extract | |
| Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers. | |
| Rubber. Vocabulary | |
| Rubbers and latices. Nomenclature. (ISO 1629:1995 + Amd.1:2007) | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1: Conformity verification report for IEC 61010-1:2001 - General requirements | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems | |
| Sensory analysis — Apparatus — Olive oil tasting glass | |
| Sensory analysis -- Methodology -- Magnitude estimation method | |
| Sensory analysis. Apparatus. Olive oil tasting glass. (ISO 16657:2006) | |
| Sensory analysis. Assessment (determination and verification) of the shelf life of foodstuffs. | |
| Sensory analysis. General guidance for sensory evaluation laboratory. Part 1: Staff responsabilities. (ISO 13300-1:2006) | |
| Sensory analysis. General guidance for sensory evaluation laboratory. Part 2: Recruitment and training of panel leaders. | |
| Sensory analysis. Guidelines for sensory assessment of the colour of products. | |
| Sensory analysis. Methodology. General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure. (ISO 13301:2002) | |
| Sensory analysis. Methodology. Secuential analysis. | |
| Sensory anlalysis. Methods for assesing modifications to the flavour of foodstuffs due to packaging. | |
| Short-circuit currents - Calculation of effects - Part 2: Examples of calculation | |
| Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 3: Examples of calculations | |
| Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations | |
| Soil quality -- Characterization of excavated soil and other soil materials intended for re-use | |
| Soil quality -- Characterization of soil related to groundwater protection. | |
| Soil quality -- Characterization of soil with respect to human exposure. | |
| Soil quality -- Determination of dry matter and water content on a mass basis -- Gravimetric method | |
| Soil quality -- Determination of organochlorine pesticides and polychlorinated biphenyls -- Gas-chromatographic method with electron capture detection. (ISO 10382:2002) | |
| Soil quality -- Determination of particle density (ISO 11508:1998) | |
| Soil quality -- Determination of potential nitrification and inhibition of nitrification -- Rapid test by ammonium oxidation. (ISO 15685:2004) | |
| Soil quality -- Determination of redox potential -- Field method. (ISO 11271:2002) | |
| Soil quality -- Determination of soil water content as a volume fraction on the basis of known dry bulk density -- Gravimetric method (ISO 16586:2003) | |
| Soil quality -- Determination of some selected chlorophenols -- Gas-chromatographic method with electron-capture detection | |
| Soil quality -- Determination of the effects of pollutants on soil flora -- Part 2: Effects of chemicals on the emergence and growth of higher plants | |
| Soil quality -- Determination of the effects of pollutants on soil flora -- Screening test for emergence of lettuce seedlings (Lactuca sativa L.) | |
| Soil quality -- Determination of water-soluble and acid-soluble sulfate. (ISO 11048:1995) | |
| Soil quality -- Effects of pollutants on earthworms (Eisenia fetida) -- Part 2: Determination of effects on reproduction (ISO 11268-2:1998) | |
| Soil quality -- Effects of pollutants on earthworms -- Part 3: Guidance on the determination of effects in field situations | |
| Soil quality -- Effects of pollutants on Enchytraeidae (Enchytraeus sp.) -- Determination of effects on reproduction and survival. | |
| Soil quality -- Format for recording soil and site information | |
| Soil quality -- Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons -- Purge-and-trap method with thermal desorption. (ISO 15009:2002) | |
| Soil quality -- Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions (ISO 11266:1994) | |
| Soil quality -- Guidance on the ecotoxicological characterization of soils and soil materials. (ISO 15799:2003) | |
| Soil quality -- Guidance on the establishment and maintenance of monitoring programmes. | |
| Soil quality -- Pretreatment of samples for determination of organic contaminants. | |
| Soil quality -- Sampling -- Part 1: Guidance on the design of sampling programmes (ISO 10381-1:2002) | |
| Soil quality -- Sampling -- Part 2: Guidance on sampling techniques (ISO 10381-2:2002) | |
| Soil quality -- Sampling -- Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites. (ISO 10381-4:2003) | |
| Soil quality -- Sampling -- Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination | |
| Soil quality -- Sampling -- Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbial processes, biomass and diversity in the... | |
| Soil quality -- Soil water and the unsaturated zone -- Definitions, symbols and theory | |
| Soil quality. Determination of pH. | |
| Soil quality. Determination of pore water pressure. Tensiometer method (ISO 11276:1995) | |
| Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method. (ISO 11461:2001) | |
| Soil quality. Dissolution for the determination of total element content. Part 1: Dissolution with hydrofluoric and perchloric acids. (ISO 14869-1:2001) | |
| Soil quality. Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants. (ISO 11267:1999) | |
| Soil quality. Sampling. Part 7: Guidance on sampling of soil gas | |
| Soil quality. Vocabulary | |
| Space data and information transfer systems. Audit and certification of trustworthy digital repositories. | |
| Space data and information transfer systems. Open archival information system (OAIS). Reference model | |
| Spices and condiments. Determination of filth | |
| Spices and condiments. Determination of non-volatil ether extract. | |
| Spices. Ginger (Zingiber officinale Roscoe). Specifications. | |
| Star anise (Illicium verum Hook. f.) -- Specification | |
| Stationary source emissions -- Determination of gas and particle-phase polycyclic aromatic hydrocarbons -- Part 1: Sampling. (ISO 11338-1:2003) | |
| Stationary source emissions -- Determination of gas and particle-phase polycyclic aromatic hydrocarbons -- Part 2: Sample preparation, clean-up and determination. (ISO 11338-2:2003) | |
| Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002) | |
| Stationary source emissions -- Sampling and determination of gaseous fluoride content. (ISO 15713:2006) | |
| Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installe d monitoring systems | |
| Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals | |
| Statistical interpretation of data -- Part 4: Detection and treatment of outliers | |
| Statistical methods -- Six Sigma -- Basic criteria underlying benchmarking for Six Sigma in organizations | |
| Tap-changers - Part 2: Application guide | |
| Terminology work. Vocabulary. Part 1: Theory and application | |
| Terminology work. Vocabulary. Part 2: Computer applications | |
| Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval | |
| Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle | |
| Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes | |
| Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of speeds and interpolations | |
| Test conditions for numerically controlled turning machines and turning centres — Part 7: Evaluation of contouring performance in the coordinate planes | |
| Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions | |
| Test conditions for numerically controlled turning machines and turning centres -- Part 1: Geometric tests for machines with horizontal workholding spindle(s) | |
| Test conditions for numerically controlled turning machines and turning centres -- Part 2: Geometric tests for machines with a vertical workholding spindle | |
| Test conditions for numerically controlled turning machines and turning centres -- Part 3: Geometric tests for machines with inverted vertical workholding spindles | |
| Test conditions for numerically controlled turning machines and turning centres -- Part 5: Accuracy of feeds, speeds and interpolations | |
| Test conditions for numerically controlled turning machines and turning centres -- Part 6: Accuracy of a finished test piece | |
| Test methods for accessories for power cables with rated voltage from 3,6/6 kV (Um = 7,2 kV) up to and including 20,8/36 kV (Um = 42 kV). | |
| Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Accessories for cables with extruded insulation (Endorsed by... | |
| Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Accessories for cables with extruded insulation | |
| Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 2: Cables with impregnated paper insulation (Endorsed by Asociación... | |
| Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 3: Transition joints between cables with impregnated paper insulation... | |
| TEST REQUIREMENTS ON ACCESORIES FOR USE ON POWER CABLES OF RATED VOLTAGE FROM 3,6/6(7,2) KV UP TO 20,8/36(42) KV. PART 2: CABLES WITH IMPREGNATED PAPER INSULATION. | |
| TEST REQUIREMENTS ON ACCESSORIES FOR USE ON POWER CABLES OF RATED VOLTAGE FROM 3,6/6(7,2) KV UP TO 20,8/35(42) KV. PART 1: CABLES WITH EXTRUDED INSULATION. | |
| Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Cables with extruded insulation | |
| Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Part 1: Cables with extruded insulation. | |
| Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Part 2: Cables with impregnated paper insulation (Endorsed by AENOR... | |
| Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Part 2: Cables with impregnated paper insulation. | |
| TESTS ON EXTERNAL GAS-PRESSURE (GAS COMPRESSION) CABLES AND ACCESORIES FOR ALTERNATING VOLTAGES UP TO 275 KV (UM = 300 KV). (Endorsed by AENOR in June of 1998.) | |
| TESTS ON INTERNAL GAS-PRESSURE CABLES AND ACCESORIES FOR ALTERNATING VOLTAGES UP TO 275 KV (UM = 300 KV). (Endorsed by AENOR in June of 1998.) | |
| TESTS ON OIL-FILLED (FLUID FILLED), PAPER- OR POLYPROPYLENE PAPER LAMINATE-INSULATED, METAL-SHEATHED CABLES AND ACCESSORIES FOR ALTERNATING VOLTAGES UP TO AND INCLUDING 400 KV (UM = 420 KV) (Endorsed by AENOR... | |
| Threshed tobacco -Determination of residual stem content | |
| Tobacco and tobacco products. Monitor test piece . Requirements and use. | |
| Tourism and related services — Visits to industrial, natural, cultural and historical sites — Requirements and recommendations. | |
| Tourism and related services. Requirements and recommendations for beach operation | |
| Tourism and related services. Yacht harbours. Part 1: Mínimum requirements for basic service level harbours. | |
| Tourism and related services. Yacht harbours. Part 2: Mínimum requirements for intermediate service level harbours. | |
| Tourism and related services. Yacht harbours. Part 3: Mínimum requirements for high service level harbours. | |
| Tourism services. Industrial tourism. Service provision. | |
| Tourist information offices - Tourist information and reception services - Requirements | |
| Water quality -- Detection and enumeration of Legionella (ISO 11731:1998) | |
| Water quality -- Determination of aluminium -- Spectrometric method using pyrocatechol violet | |
| Water quality -- Selection and application of ready-to-use test kit methods in water analysis | |
| Water quality. Detection and enumeration of bacteriophages. Part 3: Validation of methods for concentration of bacteriophages from water | |
| Wind turbine generator systems - Part 24: Lightning protection | |
| Wind turbines - Part 26-1: Time-based availability for wind turbine generating systems |
| << Prev | Next >> |