IEEE - Institute of Electrical and Electronics Engineers, Inc. Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| (1.1) Scope — This standard defines the encapsulation of declarative data essence using internet protocol (IP) multicast. This is done in a transport-independen t manner and relies solely on standard... | |
| (1.1) There is a need in the field of information technology for the unambiguous identification of objects to provide interoperability among information systems. Individual standards committees have divined, as part... | |
| (1.1) This standard defines a family of image sample structures for the representation of stationary or moving two-dimensional images sampled temporally at a constant frame rate and having an image... | |
| (1.1) This standard defines a family of progressive image sample structures for the representation of stationary or moving two-dimensional images sampled temporally at a constant frame rate and having an... | |
| (1.1) This standard defines a family of progressive image sample structures of 3840 × 2160 or 7680 × 4320 with an aspect ratio of 16×9, called Ultra High Definition Television... | |
| (1.1) This standard defines a family of progressive image sample systems for the representation of stationary or moving two-dimensional images sampled temporally at a constant frame rate and having an... | |
| (1.1) This standard defines a family of progressive sample structures of 2048 × 1080 and 4096 × 2160 images for D-Cinema content creation as defined in Table 1 and Table... | |
| (1.1) This standard defines a file format for the exchange of digital moving pictures on a variety of media between computer-based systems. It does not define the characteristics of input... | |
| (1.1) This standard defines a method of mapping up to eight synchronous streams of AES3-compliant data into a self-clocking serial interface. When used for PCM digital audio, the interface can... | |
| (1.1) This standard defines the digital representation of stationary or moving two-dimensional images for television production. The representation is sampled linearly in the spatial domain and sampled temporally at a... | |
| (1.1) This standard defines the format of the data steam for the synchronous exchange of DV-based audio, data, and compressed video (whose data structure is defined in SMPTE 314M and... | |
| (1.1) This standard defines the mapping of 2048 × 1080 pixel array into a 2200 sample × 1125 line interface structure as defined in SMPTE ST 274. — This standard... | |
| (1.1) This standard defines the mapping of 24-bit AES digital audio data and associated control information into the ancillary data space of a serial digital video conforming to SMPTE 292. | |
| (1.1) This standard defines the mapping of AES digital audio data, AES auxiliary data, and associated control information into the ancillary data space of serial digital video conforming to ANSI/SMPTE... | |
| (1.1) This standard defines the time division multiplexing (TDM) of various standard-definition digital video and generic 8-bit data signals over high-definition serial digital interfaces (SMPTE 292M). (1.2) The objective of... | |
| (1.1) This standard describes a bit-parallel composite video digital interface for systems operating according to the 525-line, 59.94-Hz NTSC standard, as described by SMPTE 170M, sampled at four times color... | |
| (1.1) This standard is a transport defining a bit-serial data structure for 3 Gb/s [nominal] component digital signals or packetized data. (1.2) This standard specifies a coaxial cable interface suitable... | |
| (1.1) This standard specifies a data stream protocol used to transport packetized data. The data packets and synchronizing signals are only compatible with 10-bit operation of SMPTE 259M (SDI) as... | |
| (1.1) This standard specifies the content of the data blocks which form the helical records as specified in ANSI/SMPTE 277M on 19-mm tape in cassettes as specified in SMPTE 226M. | |
| (1.1) This standard specifies the content, format, and recording method of the data blocks forming the helical records on the tape containing video, audio, and ancillary data in the 19-mm... | |
| (1.1) This standard specifies the dimensions of 35-mm projection reels for motion-picture and television applications and 35- and 70-mm projection reels intended for use on combination 70/35-mm projectors and rewinds. | |
| (1.1) This standard specifies the dimensions of 35-mm projection reels for motion-picture and television applications and 35-mm and 70-mm projection reels intended for use on combination 70/35-mm projectors and rewinds. | |
| (1.1) This standard specifies the dimensions of the camera aperture image and its relative position to the reference edge and the perforations of 8-mm type R motion-picture film. The location... | |
| (1.1) This standard specifies the dimensions of the camera aperture image and the relative positions of the vertical and horizontal centerlines of the intended image area with respect to the... | |
| (1.1) This standard specifies the electrical parameters of video, audio, time and control code, and tracking-control signals for 1/2-in type L helical-scan video tape recorders operating with video signals having... | |
| (1.1) This standard specifies the format and recording method of the data blocks and associated data which form the helical records on 19-mm tape in cassettes as specified in SMPTE... | |
| (1.1) This standard specifies the lateral location and dimensions of two-track variable-area analog audio records on 35-mm motion-picture prints. (1.2) This standard also specifies the area scanned in the audio... | |
| (1.1) This standard specifies the lateral location, dimensions, and the reproducing speed of variable-area and variable-density photographic audio records on 16-mm motion-picture prints. (1.2) This standard also specifies the longitudinal... | |
| (1.1) This standard specifies the lateral positions and width dimensions of two 3.81 mm (0.150 in) magnetic audio records and a control track on 16-mm single-perforated magnetic recording film. (1.2)... | |
| (1.1) This standard specifies the location of the head mounting sockets in the mounting plates of motion-picture and television cameras intended to mate with 1/4-inch-20 thread and 3/8-inch-16 thread locking... | |
| (1.1) This standard specifies the maximum dimensions of the film image area intended for projection from an 8-mm type R motion-picture film, and the placement of this area relative to... | |
| (1.1) This standard specifies the method of measurement and characteristics for the monitor chain electroacoustic response of television control and review rooms with volumes of 150 m3 (5300 ft... | |
| (1.1) This standard specifies the method of transporting AES3 data in an MPEG-2 transport stream for television applications. For these television applications, the AES3 frame rate is 48 kHz. (1.2)... | |
| (1.1) This standard specifies the minimum requirements for the content and duration of signals recorded prior to the start of the recorded program material to permit setup and adjustment of... | |
| (1.1) This standard specifies the position and dimensions of 120 perforation repeat machine-readable identification numbers. These numbers are intended to be a machine-readable version of the latent image key number. | |
| (1.1) This standard specifies the position and dimensions of machine-readable identification numbers. These numbers are intended to be a machine-readable version of the latent image key number. This standard also... | |
| (1.1) This standard specifies the position, dimensions, and reproducing speed of variable-area and variable-density photographic audio records on 35-mm motion-picture release prints. (1.2) This standard also specifies the longitudinal picture-audio... | |
| (1.1) This standard specifies the recording system for the video, audio, time and control code, and tracking-control signals for 1/2-in type M-2 helical-scan video tape recorders operating with video signals... | |
| 1.1 This standard defines a file format for the exchange of digital moving pictures on a variety of media between computer-based systems. It does not define the characteristics of input... | |
| 1.1 This standard specifies the position and dimensions of machine-readable identification numbers. These numbers are intended to be a machine-readable version of the latent image key number. This standard also... | |
| Amend SMPTE ST 382:2007 to define constant duration audio Custom-Wrapping to distinguish this specific Custom-Wrapping from other Custom-Wrappings and to add Essence Container labels for signaling. | |
| Amend ST 2067-40:2016 to address interoperability issues. | |
| An Output Profile List (OPL) defines the transformation of selected virtual tracks of a single Interoperable Master Format (IMF) Composition into deliverables appropriate for downstream distribution channels. This transformation consists... | |
| For interoperability of digital cinema equipment used to create an Audio D-Cinema Distribution Master. The necessary characteristics of digital audio to be specified are bit depth, sample rate, minimum channel... | |
| ISO/IEC 13818-2, commonly known as MPEG-2 video, includes specification of the MPEG-2 4:2:2 profile. Based on ISO/IEC 13818-2, this standard provides additional specification for the MPEG-2 4:2:2 profile at high... | |
| JPEG 2000 is a picture-by-picture compression coding defined by ISO-IEC 15444-1 and used for both individual pictures and picture sequences. This standard specifies the mapping of JPEG 2000 codestreams into... | |
| JPEG 2000 is a picture-by-picture compression coding defined by ISO/IEC 15444-1 and used for both individual pictures and picture sequences. This standard specifies the mapping of JPEG 2000 codestreams into... | |
| Note: This revision of ST 425-1:2011 incorporates Amendment 1:2014, but is otherwise substantively unchanged. — This standard defines three mapping formats: Level A, Level B Dual-Link mapping and Level B... | |
| Note: This version of ST 379M is superseded, but is still referenced by some later SMPTE documents. — This standard specifies the format of the MXF generic container. The MXF... | |
| SMPTE 422M defines the mapping of any compliant JPEG 2000 codestream into the MXF generic container and provides Keys, ULs and essence descriptor definitions. This standard further defines the MXF... | |
| SMPTE ST 299-2 defines an SMPTE 291M Type 1 packet structure for identifying audio channels numbered from 17 to 32, beyond the 16 channels defined in SMPTE ST 299-1. Four... | |
| The following recommends changes to be made to ST 382:2007 as a result from the incorporation of the “Channel IDs” and “Mono Source Track IDs” properties to Amendment 1 to... | |
| The Media Device Control (MDC) specification defines a platform and protocol agnostic framework for the control of network-attached devices over Internet Protocol (IP) networks. The framework, known as the Media... | |
| The metadata dictionary structure defined in this standard covers the use of metadata for all types of essence (video, audio, and data in their various forms). Applications of individual dictionary... | |
| The metadata groups register defined in this standard covers the use of metadata for all types of essence (picture, sound, data in their various forms). Applications of individual register entries... | |
| The metadata groups registry structure defined in this standard covers the use of metadata for all types of essence (picture, sound, data, in their various forms). Applications of individual registry... | |
| The normative portions of this document define a coded representation (bitstream) of an audio program. Information is included to describe typical uses of the format. The bitstream carries audio essence... | |
| The purpose of this amendment is to add an additional provision which defines Time Code mapping into the Level A section. Numbers of the Mapping Structure are also added into... | |
| The purpose of this amendment is to add detail about the placement of audio data and control packets in the 1080-line Level A mapping, to describe the mapping of 4:2:0... | |
| The purpose of this amendment is to add support for Progressive video systems with 48 and 48/1.001 Hz frame rates. Documentation for Progressive Segmented Frame and dual-link interlace transports are... | |
| The purpose of this amendment is to add support for UHDTV colorimetry, and to provide additional information about the size of the ancillary data space available. | |
| The purpose of this amendment is to add the 12-Track Audio Channel to Audio Track assignments from Table 3 of Appendix 1 to Annex 1 of ITU-R BR.1384-1, Parameters for... | |
| The purpose of this amendment is to address a request from 21DC to enhance SMPTE ST 377-1:2011 by incorporating the “Channel IDs” and “Mono Source Track IDs” properties found in... | |
| The purpose of this amendment is to address various issues identified since the publication of SMPTE ST 377-1:2011. | |
| The purpose of this amendment is to change the Timing Jitter specification for the interface to correctly reflect the requirements and capabilities of 12G-SDI equipment. It also corrects arithmetic errors... | |
| The purpose of this amendment is to change the Timing Jitter specification for the interface to correctly reflect the requirements and capabilities of 6G-SDI equipment. It also corrects arithmetic errors... | |
| The purpose of this amendment is to correct codeword errors. | |
| The purpose of this amendment is to modify SMPTE 268M-2003 so that the file format for Digital Moving-Picture Exchange (DPX) may be utilized as a container for Academy Density Exchange... | |
| The purpose of this standard is to define a method to uniformly map metadata and data essence present within vertical ancillary packets (VANC) on the serial digital Interface (SDI), into... | |
| The purpose of this standard is to specify mapping of the extended video line data and the vertical ancillary data packets (VANC) present in the vertical blanking interval (VBI) space... | |
| The scope of this amendment is to integrate the additional frame rate standard [SMPTE ST 429-13:2009] D-Cinema Packaging - DCP Operational Constraints for Additional Frame Rates into the standard [ST429-2... | |
| The SMPTE 292 suite of documents defines the mapping of various source image formats onto serial digital interfaces operating at a nominal rate of 1.5 Gb/s. This informative “roadmap” describes... | |
| The SMPTE labels structure defined by this standard covers the use of SMPTE universal labels as individual items where the meaning of each label is conveyed by the content of... | |
| The SMPTE ST 2094 suite of documents define metadata for use in color volume transforms of content. The metadata are content-dependent and can vary scene-by-scene or image-by-image. The metadata are... | |
| The SMPTE ST 2094 suite of documents defines metadata for use in color volume transforms of content. SMPTE ST 2094-2 specifies Key-Length-Value (KLV) representations of metadata sets defined in SMPTE... | |
| The SMPTECore standard provides definitions for a core set of descriptive (only) metadata as a reference to support interoperable use across diverse professional broadcast and feature motion picture workflows and... | |
| The specification defines the Academy Color Encoding Specification (ACES). | |
| The standard defines how HDR/WCG metadata is placed into ancillary data packets according to SMPTE ST 291-1, to form the HDR/WCG KLV Metadata Ancillary Data Packet, using Key-Length-Value encoding as... | |
| This amendment adds the frame rates of 96 fps, 96/1.001 fps, 100 fps, 120 fps and 120/1.001 fps to the frame rates defined in Table 1 and Table 2 of... | |
| This amendment corrects typographical errors and provides clarifying text to support correct interpretation of the standard. | |
| This amendment has been created to address a mistake in the 2013 publication of ST 2067-5. A mistaken value is present in the table in Section 5.3. As defined in... | |
| This document amends section 4 and table 1 to resolve an error that was introduced in ST 335:2012 during revision from ST 335:2001. | |
| This document constrains the format of a DCDM Subtitle file [SMPTE 428-7] for use in Closed Caption and Closed Subtitle applications. Note that this document does not replace [SMPTE 428-7]. | |
| This document defines a standard for the authoring of declarative data content intended to be combined primarily with video and/or audio services, and distributed to data-capable television signal receivers. The... | |
| This document defines a standard manner for the carriage of declarative data essence (SMPTE 363M) triggers and IP packets in the vertical blanking interval of the NTSC video standard. | |
| This document defines a standard way to wrap an interleaved stereoscopic 3D video stream in MXF using OP1a per SMPTE ST 378. It follows the common provisions defined in part... | |
| This document defines an extension of the MXF File Format that allows specific classes of data streams to be contained in MXF Body Partitions. — The classes of data streams... | |
| This document defines Compositions for IMF Application #3, i.e. the parameters of Image/Audio/Data Essences, Track Files, and the constraints of Composition Playlist. It is based on Image Essence coded as... | |
| This document defines constraints intended to enhance the interoperability of XML documents. | |
| This document defines content protection and content management (CPCM) information in the form of an extended content control information (ExCCI) data packet, including the packet's syntax, semantics, and structure. The... | |
| This document defines Image Pixel Color Schemes, as specified in SMPTE ST 2067-101, that are of general use to Interoperable Master Format (IMF) Applications. | |
| This document defines the [SMPTE 429-7] Composition Playlist asset type extensions required for inclusion of [SMPTE 428-10] Closed Captions and Closed Subtitles, as well as the asset type extension required... | |
| This document defines the bitstream syntax and semantics for compressed video data in VC-1 format, and specifies constraints that are required for conformant bitstreams. It also describes the complete process... | |
| This document defines the data structure of the Material Exchange Format (MXF) for the interchange of audio-visual material. It defines the data structure for network transport and may be used... | |
| This document defines the operational constraints required for the use of additional frame rates as defined by SMPTE 428-11 in a D-Cinema Package (DCP). | |
| This document defines the real-time transport of audio and video fingerprints used for audio to video timing measurement. These fingerprints and their containerization is defined in SMPTE ST 2064-1. Transport... | |
| This document defines the Sidecar Composition Map structure, which allows a Sidecar Asset to be associated with a Composition Playlist. | |
| This document defines the syntax and semantics for the carriage of SMPTE 291M Ancillary Data Packets in MPEG-2 Transport Stream PES packets. It supports ancillary data packets regardless of whether... | |
| This document defines UHDTV and HDR UHDTV video payload mapping into Single-link, Dual-link, Quad-link or Octa-link 10G-SDI Mode D defined in SMPTE ST 435-2. This document also defines mapping of... | |
| This document defines UHDTV and HDR UHDTV video payload mapping of formats as shown in Table 1 into Multi-link 10Gb/s [nominal] Signal/Data Interface. This document also defines mapping of ANC,... | |
| This document defines UHDTV video payload mapping into Single-link, Dual-link, Quad-link or Octa-link 10G-SDI Mode D defined in SMPTE 435-2. This document also defines mapping of ANC/Audio Data, payload ID... | |
| This document defines UHDTV video payload mapping into Single-link, Dual-link, Quad-link or Octa-link 10G-SDI Mode D defined in SMPTE ST 435-2. This document also defines mapping of ANC, Audio Data,... | |
| This document defines UHDTV video payload mapping of formats as shown in Table 1 into Multi-link 10Gb/s [nominal] Signal/Data Interface. This document also defines mapping of ANC, payload ID and... | |
| This document describes a method of binding content identifiers to media, utilizing audio watermarking, allowing the content to be identified both electronically and acoustically. | |
| This document describes the bitstream syntax and decoding process for the SMPTE Layered Video Extension (LVE). Bit-streams and decoders conforming to one or more of the profiles specified in this... | |
| This document describes the physical packaging format of the SMPTE Media Package. This specification is derived from the ISO 29500-2 specification for Open Packaging Conventions. — The SMPTE Media Package... | |
| This document describes the Zero Configuration (ZeroConf) and service discovery mechanisms defined for the Media Device Control (MDC) [SMPTE ST 2071] suite of standards. Defining how MDC compliant devices utilize... | |
| This document is Part 1 of a series of documents that specify the concepts, data structures and operations required to control modern media devices. This document presents a platform agnostic... | |
| This document is superseded by SMPTE ST 377-1:2011 and subsequent Amendments; this 2004 version is provided for reference only. — This standard defines the data structure of the material exchange... | |
| This document is the first part of a multipart document set that defines metadata and index structure of stereoscopic 3D video streams in MXF for operational applications. This document covers... | |
| This document provides a standard for data representation of disparity maps for use in exchanges between stereoscopic 3D video production and mastering systems, and is particularly suited to live events. | |
| This document provides the definition of a single MXF file design for Stereoscopic Picture content wrapping. It also defines a new Composition Playlist (CPL) extension element to reference such Stereoscopic... | |
| This document provides the specification on how to carry binary EBU TECH 3264 (STL) files into the MXF Generic Stream Container using the MXF Generic Stream Partition defined in SMPTE... | |
| This document references 4096×2160 Digital Cinematography Production Image Formats FS/709 — Mapping into a Multi-link 10G-SDI Mode B defined in SMPTE ST 435-2. This document also defines locations within the... | |
| This document specifies a D-Cinema Package (DCP), a collection of files containing d-cinema essence and related metadata to be ingested and reproduced by a d-cinema playback system. | |
| This document specifies a generic method for mapping a D-Cinema Package (DCP) onto one or more file storage volumes. Data structures are specified which provide for the mapping of D-Cinema... | |
| This document specifies a generic method of mapping asset identifiers (UUID) to locations (URI). An application of the method to common hierarchical filesystems, the Basic Map Profile v2, is specified. | |
| This document specifies Compositions for IMF Application #2. It is a specialization of the IMF Framework. — Application #2 is meant for studio applications where a TV or movie title... | |
| This document specifies compositions for IMF Application #4. IMF Application #4 is a specialization of the IMF Framework, and is intended to exchange content of cinematographic work after digital postproduction... | |
| This document specifies Compositions for IMF Application #5. It is a specialization of the IMF Framework. — Application #5 targets archival applications where a TV or movie title is to... | |
| This document specifies definitions, data structures and Macros applicable to audio essence for use with the Interoperable Master Format (IMF) Output Profile List framework. | |
| This document specifies definitions, data structures and Macros applicable to image essence for use with the Interoperable Master Format (IMF) Output Profile List framework. | |
| This document specifies how a stereoscopic 3D High Definition (“HDTV”) video contribution system based on the MPEG-2 Transport Stream (TS) performs coding, multiplexing, and decoding. It defines constraints for the... | |
| This document specifies provisions that may be used by multiple IMF Applications. These provisions include essence and metadata constraints, but exclude image essence constraints, which are specified along with other... | |
| This document specifies requirements for a plug-in mechanism to add Immersive Audio Bitstream (IAB) essence, as specified in ST 2098-2, to IMF compositions. | |
| This document specifies ruggedized fiber-optic connectors based on standardized fiber-optic connectors, intended for use in HDTV and UHDTV broadcasting and video equipment where robust and reliable solutions are required. The... | |
| This document specifies the characteristics of digital audio for UHDTV program production and distribution. This document also defines the mapping and labeling of 22.2 multichannel audio for UHDTV program production. | |
| This document specifies the Composition Playlist structure. The Composition Playlist is a self-contained representation of a single complete D-Cinema work, such as a motion picture, or a trailer, or an... | |
| This document specifies the format of a DCDM Subtitle file. A DCDM Subtitle file contains a set of instructions for placing rendered text or graphical overlays at precise locations on... | |
| This document specifies the mapping of VC-2 coded pictures into MXF. Specifically, it defines how to map a VC-2 stream (or part of a stream) into a Picture Element of... | |
| This document specifies the requirements and constraints for a D-Cinema Package (DCP) that contains Immersive Audio (SMPTE ST 2098-2) essence, in addition to the requirements and constraints as defined in... | |
| This document specifies the wrapping of a stereoscopic 3D video stream using separated MXF files, which can be OP-Atom or OP-1a. This document follows the common provisions defined in Part... | |
| This family of engineering documents defines an extensible system of RTP-based essence streams referenced to a common reference clock, in a manner which specifies their timing relationships. — This standard... | |
| This purpose of this amendment is to correct typographical errors and provide clarifying text to support correct interpretation of the standard. | |
| This purpose of this amendment is to fill in a value in a table entry that was left as TBD in the published document. | |
| This specification defines additional D-Cinema composition metadata, and provides guidelines on the use of D-Cinema composition metadata for composition ingest, scheduling and diagnostic. | |
| This specification extends IMF Application #2 with support for image frames with ▪ colorimetry specified in IEC 61966-2-4 and Recommendation ITU-R BT.2020; and ▪ a maximum width and height of... | |
| This specification extends IMF Application #2 with support for image frames with: — colorimetry specified in IEC 61966-2-4 and Recommendation ITU-R BT.2020; — color primaries specified in SMPTE RP 431-2; | |
| This standard defines 1080-line and 2160-line mapping formats as described below; 1080-line mapping specifies: The mapping of the image formats of 1920 × 1080 and 2048 × 1080 pixels listed... | |
| This standard defines 1080-line and 2160-linemapping formats as described below; — 1080-line mapping specifies: — The mapping of the image formats of 1920 × 1080 and 2048 × 1080 pixels... | |
| This standard defines a 3D Frame Compatible (3DFC) ancillary data packet that enumerates various frame packing methods in a manner compatible with Recommendation ITU-T H.264 (H.264) and ISO/IEC 14496-10 MPEG-4... | |
| This standard defines a bit-serial data structure and coaxial cable interface for the transport of signals with a total payload of 2.970 Gb/s or 2.970/1.001 Gb/s. — This standard specifies... | |
| This standard defines a bit-serial data structure and the coaxial cable interface specifications for 1.5 Gb/s [nominal] Signal/Data Serial Interface to carry either 1280×720, 1920×1080 or 2048×1080 active pixel formats... | |
| This standard defines a byte-level data encoding protocol for representing data items and data groups. This protocol defines a data structure which is independent of the application or transportation method... | |
| This standard defines a common layer for transport of packetized audio, video, and data over asynchronous transfer mode (ATM) using ATM adaptation layer type 1 (AAL1). This standard covers the... | |
| This standard defines a connector primarily intended for use in television broadcasting and video equipment, such as camera head to camera control-unit connections. It defines hybrid connectors, which contain a... | |
| This standard defines a digital pink noise signal to be used in calibrating the sound pressure level and electroacoustic response of a cinema B-chain system. It also defines an example... | |
| This standard defines a document object model (DOM) and an object environment for use in manipulating HTML documents using the ECMAScript environment of declarative data essence. The standard reflects the... | |
| This standard defines a family of progressive image sample structures of 3840 × 2160 or 7680 × 4320 with an aspect ratio of 16×9, called Ultra High Definition Television (UHDTV),... | |
| This standard defines a family of progressive image sampling systems for the representation of stationary or moving two-dimensional images sampled temporally at a constant frame rate and having an image... | |
| This standard defines a family of raster scanning systems for the representation of stationary or moving two-dimensional images sampled temporally at a constant frame rate and having an image format... | |
| This Standard defines a forward error correction technique for the carriage of High Bit Rate real-time media over IP networks. — The term High Bit Rate is used herein to... | |
| This Standard defines a forward error correction technique for the carriage of High Bit Rate real-time media over IP networks. | |
| This standard defines a forward error correction technique for the carriage of real-time Video/Audio content over IP networks. | |
| This standard defines a labeling framework for multichannel audio essence in MXF file structures. It specifies the basic object model, structures and metadata items for the MCA Labeling Framework. — | |
| This standard defines a means of mapping VC-2 data onto a single HD SDI link, based upon the SMPTE 292 data structure, to support the transport of 1920 × 1080/50/P,... | |
| This standard defines a means of transporting a stereoscopic image pair consisting of a Left Eye and Right Eye image (Le and Re) using an interface consisting of a single... | |
| This standard defines a means of transporting stereoscopic images (Left eye and Right eye images) using an interface consisting of pairs of four data streams based on the SMPTE ST... | |
| This standard defines a means of transporting stereoscopic images (Left eye and Right eye images) using an interface consisting of two streams based on the SMPTE ST 292-1 data structure. | |
| This standard defines a means of transporting stereoscopic images (Left eye and Right eye images) using an interface consisting of two streams based on the SMPTE ST 425-1 data structures. | |
| This Standard defines a method for providing secure transmission of digital pictures over a transport conforming to SMPTE 292. Encryption of data in H-ANC and V-ANC data regions is not... | |
| This standard defines a method of mapping closed captioning and certain other related data services into the 10-bit vertical ancillary (“VANC”) data space. It specifies the structure of packets carrying... | |
| This standard defines a number of descriptive metadata frameworks collectively called the MXF descriptive metadata scheme-1 (DMS-1). Each descriptive metadata (DM) framework is defined by a logical structure of metadata... | |
| This standard defines a serial interface for transmission of CEA-708 digital television closed caption data from a caption server to video encoder to be used for populating the closed-caption structure... | |
| This standard defines a standard for the authoring of declarative data content intended to be combined primarily with video and/or audio services, and distributed to data-capable television signal receivers. Declarative... | |
| This Standard defines a standardized wrapper for the carriage of low bit rate MPEG-2 TS packets, in the 10-bit vertical ancillary data (VANC) space of a standard definition or high... | |
| This standard defines a sub-set of the Material Exchange Format (MXF) for low latency streaming applications that use Operating Pattern 1A. Latency is defined as the delay time between image/sound... | |
| This standard defines a syntax for encrypted Track Files, i.e. MXF files containing a single Essence Track, and specifies a matching reference decryption model. It uses the AES cipher algorithm... | |
| This standard defines a transport protocol for the carriage of real-time non-piecewise constant variable bit rate (VBR) MPEG-2 Transport Streams over IP networks, either with or without Forward Error Correction... | |
| This standard defines a transport protocol for the carriage of real-time piecewise constant variable bit rate (VBR) MPEG-2 Transport Streams over IP networks, either with or without Forward Error Correction... | |
| This standard defines a Two-Frame Marker for progressive HDTV video formats at 48/1.001(47.95)-Hz, 48-Hz, 50-Hz, 60/1.001(59.94)-Hz, and 60-Hz frame rates. This Two-Frame Marker is multiplexed into serial streams carrying such... | |
| This standard defines a Two-Frame Marker for progressive HDTV video formats at 50-Hz, 60/1.001(59.94)-Hz, and 60-Hz frame rates. This Two-Frame Marker is multiplexed into serial streams carrying such a video... | |
| This standard defines a unidirectional IP-based protocol for the transport of real-time video, audio, and ancillary signals. In particular this standard defines a method for the encapsulation of the payloads... | |
| This standard defines a unidirectional transport protocol for the carriage of real-time Constant Bitrate (CBR) MPEG-2 Transport Streams over IP networks. For professional applications, MPEG-2 using the 4:2:2P@ML profile is... | |
| This Standard defines Academy Printing Density (APD) by specifying the spectral responsivities ΠAPD,! and the APD reference measurement device. | |
| This standard defines additional frame rates for D-Cinema that are in addition to the primary frame rates of 24 and 48 frames per second. These additional frame rates are defined... | |
| This standard defines algorithms and procedures for generating audio and video fingerprints from audio and video essence used for audio to video timing measurements. It also specifies a method for... | |
| This standard defines an interface for system M (525/59.94) wide screen, 16×9 aspect ratio, digital television equipment based on ITU-R 601-3. Two luminance sampling rates are provided, 13.5-MHz sampling providing... | |
| This standard defines an MXF extension that supports reverse play for specialized applications. Devices that use serial storage, have limited memory or computing capacity may find managing full MXF index... | |
| This standard defines an optical fiber system for transmitting bit-serial digital signals. It is intended for transmitting SMPTE 259M signals (143 through 360 Mb/s), SMPTE 344M signals (540Mb/s), SMPTE 292... | |
| This standard defines an optical fiber system for transmitting bit-serial digital signals. It is intended for transmitting SMPTE ST 259 signals (143 through 360 Mb/s), SMPTE ST 344 signals (540Mb/s),... | |
| This Standard defines and specifies Safe Action and Safe Title Areas for 1920 × 1080, 1280 × 720, 720 × 576 and 720 × 480 television formats. This document is... | |
| This standard defines and specifies safety film for motion-picture use. | |
| This standard defines archive frame rates for D-Cinema that are in addition to the primary frame rates of 24 and 48 fps and the additional frame rates of 25, 30,... | |
| This standard defines constraints on the encoding of and syntax for MPEG-2 transport streams such that they may be spliced without modifying the PES packet payload. Generic MPEG-2 transport streams,... | |
| This standard defines extensions to SMPTE ST 2073-1, ST 2073-3, and ST 2073-4 to support sections in a VC-5 bitstream. — Sections subdivide the bitstream to enable advanced decoder features... | |
| This standard defines extensions to ST 2073-1 to support the representation of multiple images in a single VC-5 bitstream. Each of the individual images is called a layer. All layers... | |
| This Standard defines high dynamic range (HDR) and wide color gamut (WCG) extensions for the DPX file format. Files that implement this Standard use version number V2.0HDR in the file... | |
| This standard defines how HDR/WCG metadata can be placed into ancillary data packets according to SMPTE ST 291-1, to form the HDR/WCG Metadata Ancillary Data Packet. — This standard specifies... | |
| This standard defines how VC-1 bitstreams shall be mapped in the MXF Generic Container (SMPTE 379M). VC-1 defines three possible profiles for compliant bitstreams: Simple, Main and Advanced. All of... | |
| This standard defines metadata for use in creating immersive audio content for cinema. The standard defines the metadata items that shall be supported in immersive audio content and if appropriate,... | |
| This standard defines names and abbreviations for Immersive Audio Channels and Immersive Soundfield Groups associated with D-Cinema Immersive Audio presentation. This standard also provides informative guidance on typical locations of... | |
| This standard defines operational pattern 1a for the exchange of a MXF file with a single item of a playable essence container comprising either a single essence element or interleaved... | |
| This standard defines operational pattern 1b for the exchange of a MXF file with a single item contained in multiple, synchronized, playable essence containers, each comprising either a single essence... | |
| This standard defines operational pattern 2a for the exchange of a MXF file with a play-list of playable essence containers comprising either a single essence element or interleaved essence elements. | |
| This standard defines operational pattern 2a for the exchange of an MXF file with a play-list of playable essence containers, each comprising either a single essence element or interleaved essence... | |
| This standard defines operational pattern 2b for the exchange of an MXF file which represents a playlist of ganged (synchronized) essence containers. The essence containers may be internal or external... | |
| This standard defines operational patterns 1c, 2c and 3c, as defined in SMPTE 377M section 7, for the exchange of MXF files that represent the following levels of file complexity:... | |
| This standard defines operational patterns 3a and 3b as defined in SMPTE 377M section 7 for the exchange of MXF files that represent the following levels of file complexity: OP3a:... | |
| This standard defines requirements for multiple redundant streams of RTP packets to allow for the creation of a single reconstructed output stream through seamless protection switching at the RTP datagram... | |
| This standard defines requirements for redundant streams of SMPTE 2022 packets to allow for creation of a single reconstructed output stream through seamless protection switching at the RTP datagram level. | |
| This Standard defines the Academy Density Exchange Encoding (ADX) including the encoding method, the 16-bit and 10-bit component value encoding metrics, and the method for converting between the 16-bit and... | |
| This standard defines the basic characteristics of the analog video signals associated with origination equipment operating in 1125-line high-definition television production systems. This standard defines systems operating at 60.00 Hz... | |
| This standard defines the colorimetry (color primaries and white points) of P3 RGB color spaces. It also specifies metadata items including SMPTE Universal Labels which identify each RGB colorimetry. These... | |
| This Standard defines the combination of 1.5G-SDI signals, 3G-SDI signals and 6G-SDI signals into a 12G-SDI interface. — MODE 1: Carriage of two SMPTE ST 2081-10 6G-SDI signals on a... | |
| This standard defines the component analog video interface for studio applications using three primary color signals carried on parallel channels for the interconnection of television equipment. The signals carried across... | |
| This standard defines the data structure for the interface of DV-based digital audio, subcode data, and compressed video at 100 Mb/s. The standard defines the processes required to decode the... | |
| This Standard defines the defines the combination of four HD-SDI signals or two 3G-SDI signals into a 6G-SDI interface. — MODE 1: Carriage of two SMPTE ST 425-1 3G-SDI signals... | |
| This standard defines the digital data representation of the digitized values of the Digital Vertical Interval (VITC) code words defined in SMPTE ST 12-1. The intended use is with the... | |
| This standard defines the DV-based data structure for the interface of digital audio, subcode data, and compressed video with the following parameters: 525/60 system – 4:1:1 image sampling structure, 25... | |
| This standard defines the electrical and mechanical characteristics of an interface system comprised of a general-purpose communication channel and interface device(s) used for the transfer of data and digital control... | |
| This standard defines the electrical and physical representation of a television color reference pattern. It also specifies colorimetry, geometry, and related parameters. | |
| This standard defines the encoding process of the HD-D5 video compression and its data format for the 1080/59.94i, 50i, 25p, 24p, 23.98p system (hereafter referred to as the 1080 system)... | |
| This standard defines the flow control protocol to be used between an emission multiplexer and data server for opportunistic data broadcast. Opportunistic data broadcast inserts data packets into the output... | |
| This standard defines the format of the unique material identifier (UMID). — The UMID provides a method of identification for instances of audiovisual material and thus enables the material to... | |
| This standard defines the formatting and constraints of the DCDM SMPTE 428-1 Level 3 image Pixel Structure for transmission over the 1.485Gb/s dual link serial digital interface SMPTE 372M or... | |
| This standard defines the formatting and constraints of the DCDM SMPTE 428-11 AFR Level 2 and AFR Level 4 image Pixel Structure for transmission over the 1.485 Gb/s dual link... | |
| This standard defines the haptic-tactile essence associated with a live event that is used together with audiovisual content in the broadcast production environment. This standard excludes any specification of the... | |
| This standard defines the IMF Essence Component, an OP1a MXF structure for interchange of audio, picture and data essence. It defines data structures for interchange at the signal interfaces of... | |
| This standard defines the lid: uniform resource identifier (URI), and describes how it is used to identify instances of resources, such as web pages and graphics files, that are transmitted... | |
| This standard defines the mapping and labeling of channels for the Digital Cinema Distribution Master (DCDM) audio in a digital cinema audio system to aid the identification and location of... | |
| This standard defines the mapping format of the SYNC stream block (SSB), defined in SMPTE 354M, to ATM adaptation layer type 1 (AAL1). | |
| This standard defines the mapping of compressed picture data according to the type D-10 data stream and up to 8 channels of AES3 data into the material exchange format generic... | |
| This standard defines the mapping of compressed picture data according to the type D-11 data stream and up to 8 channels of AES3 data into the material exchange format generic... | |
| This standard defines the mapping of digital audio data, ancillary data and metadata from the broadcast wave format (BWF) and from AES3 digital audio data into sound essence elements, which... | |
| This standard defines the mapping of Mode 1: 2160-line Source image formats and ancillary data into a Dual-link 6 Gb/s [nominal] SDI bit-serial interface. This standard also defines the carriage... | |
| This Standard defines the mapping of MODE 1: 4320-line Source image formats and ancillary data into a Quad-link 12 Gb/s [nominal] SDI bit-serial interface; MODE 2: 2160-line Y′C′BC′R or R′G′B′ | |
| This Standard defines the mapping of MODE 1: 4320-line Y′C′BC′R 4:2:2 and 4:2:0 10-bit image formats and ancillary data into a Dual-link 12 Gb/s [nominal] SDI bit-serial interface; MODE 2:... | |
| This standard defines the mapping of MODE 1: 4320-line Y′C′BC′R 4:2:2 and 4:2:0 10-bit image formats and ancillary data on a Quad-link 6 Gb/s [nominal] SDI bit-serial interface; MODE 2:... | |
| This standard defines the mapping of the image formats of 3840×2160 and 4096×2160 pixels listed in Table 1 into eight parallel 10-bit data streams (known as data stream one, data... | |
| This standard defines the mapping of the Media Dispatch Protocol message set and data structures onto HTTP request / response pairs and XML elements. | |
| This standard defines the mapping of: — • Mode 1: 2160-line Standard Dynamic Range (SDR) and High Dynamic Range (HDR) Source image formats and ancillary data into a Dual-link 6G-SDI... | |
| This Standard defines the mapping of: — • MODE 1: 4320-line Standard Dynamic Range (SDR) and High Dynamic Range (HDR) Source image formats and ancillary data into a Quad-link 12... | |
| This Standard defines the mapping of: — • MODE 1: 4320-line Standard Dynamic Range (SDR) and High Dynamic Range (HDR) Y'C'BC'R 4:2:2 and 4:2:0 10-bit image formats and ancillary data... | |
| This Standard defines the mapping of: • Mode 1: 2160-line Source image formats and ancillary data into a 12 Gb/s [nominal] SDI bit-serial interface — This Standard also defines the... | |
| This Standard defines the mapping of: • Mode 1: 2160-line Source image formats identified in Table 1 into a 6G-SDI 10-bit interface as defined in section 7 Single-link 6G-SDI 10-bit... | |
| This Standard defines the mapping of: • Mode 1: 2160-line Source image formats identified in Table 1 into a Single-link 6 Gb/s [nominal] SDI bit-serial interface • Mode 2: 1080-line... | |
| This standard defines the mapping of: • Mode 1: 2160-line Standard Dynamic Range (SDR) and High Dynamic Range (HDR) Source image formats and ancillary data into a 12G-SDI 10-bit interface... | |
| This standard defines the MDP Basic Target Pull Profile. This specifies a subset of the MDP protocol defined in SMPTE 2032–1, in which the name and size of all files... | |
| This standard defines the message set, data structures and data dictionary of the Media Dispatch Protocol (MDP) for orchestrating the transfer of files across IP networks. — The standard also... | |
| This standard defines the method of mapping VC-2 data onto an SDTV SDI link operating at 270Mbps, based upon the data structures defined in SMPTE ST 259 and ITU-R BT... | |
| This standard defines the MPEG video elementary stream (ES) information to facilitate seamless edits under defined circumstances. The video ES, as defined by the MPEG standards, is supplemented with additional... | |
| This standard defines the object data format for the exchange of DV-based audio, data, and compressed video (which data structure is defined in SMPTE 314M) over the common layer defined... | |
| This standard defines the services and protocols contained within the physical, data link, network, transport, and session layers of ESlan-1, a control and data network for use in television and... | |
| This Standard defines the SMPTE profile of W3C Timed Text Markup Language (TTML), designated SMPTE- TT, which may represent Captions or Subtitles. It identifies the features from TTML required for... | |
| This Standard defines the SMPTE profile of W3C Timed Text Markup Language (TTML), designated SMPTE-TT, which may represent Captions or Subtitles. It identifies the features from TTML required for interoperability... | |
| This standard defines the specialized Operational Pattern “OP-Atom” or OP-Atom for the storage and exchange of an MXF file with a tightly defined structure for a single item of essence... | |
| This standard defines the specification of a 4-byte payload identifier that describes aspects of the payload carried on the SMPTE Serial Digital Interface (SDI) such as: the digital interface standard; | |
| This standard defines the specification of a 4-byte payload identifier which may be added to digital interfaces for the purpose of identifying the payload. The payload identifier is applicable to... | |
| This standard defines the status monitoring and diagnostics protocol (SMDP) used with a general-purpose communication link that connects to equipment used in the production, post-production, and/or transmission of visual and... | |
| This standard defines the structure of a dictionary of metadata elements that may be used in a range of applications such as production workflow applications, data exchange formats, and archival... | |
| This standard defines the structure of a register of essence element keys as used by essence container specifications coded according to SMPTE ST 336, e.g. SMPTE ST 379-1 and ST... | |
| This standard defines the structure of a register of labels as defined by SMPTE ST 336. These labels may be used in a range of applications such as production workflow... | |
| This standard defines the structure of the Caption Distribution Packet (CDP). A CDP may contain time code, CEA-608 data, CEA-708 closed captioning data, and ATSC A/65 closed caption service information. | |
| This standard defines the syntax of encrypted D-Cinema non-interleaved MXF frame-wrapped track files and specifies a matching reference decryption model. It uses the AES cipher algorithm for essence encryption and,... | |
| This standard defines the syntax of Uniform Resource Names (URN) for SMPTE resources. These URNs are intended to provide for the assignment of unique, permanent, and location-independent names for resources... | |
| This standard defines the transport of Multi-Link (ML) or Multi-Channel (MC) SDI data streams over a single fiber using Coarse Wavelength Division Multiplexing (CWDM). Specifically, this standard specifies a CWDM... | |
| This standard defines the uncompressed image characteristics for DCDM by specifying a pixel array, frame rate, pixel bit depth, and colorimetry. The DCDM image operational levels are defined by the... | |
| This standard defines the VC-2 video compression system through the stream syntax, entropy coding, coefficient unpacking process and picture decoding process. The decoder operations are defined by means of a... | |
| This standard defines three mapping formats: Level A, Level B Dual-Link mapping and Level B Dual-Stream mapping as described below; — Level A specifies: — The direct mapping of various... | |
| This standard defines two alternatives for bit-serial interfaces for the 720 × 483 active line at 59.94-Hz progressive scan digital signal for production, defined in ANSI/SMPTE 293M. Interfaces for coaxial... | |
| This standard defines Universal Labels as a means to identify the type and encoding of data within a generalpurpose data stream or file. These Universal Labels can be used by... | |
| This standard defines Universal Labels, names and symbols for common Audio Channels, Soundfield Groups and Group of Soundfield Groups for the purpose of labeling IMF audio essence. — This standard... | |
| This standard defines Universal Labels, names and symbols for common D-Cinema Audio Channels and Soundfield Groups for the purpose of labeling D-Cinema audio essence. — This standard also provides informative... | |
| This standard defines Y?D?ZD?X color-difference computations to be used with high dynamic range X?Y?Z? signals. The computations have been optimized for the EOTF specified in SMPTE ST 2084, primarily for... | |
| This Standard defines: (1) A point in time, the SMPTE Epoch, which is used for alignment of all real-time signals referenced in this Standard; (2) The alignment of these signals... | |
| This standard describes a 10-bit serial digital interface operating at 143/270/360 Mb/s. The serial interface may carry uncompressed SDTV signals, or data. This standard has application in the television studio... | |
| This standard describes a method of binding Distribution IDs and Timestamps to media, utilizing audio watermarking, allowing this information to be detected both electronically and acoustically. | |
| This standard describes a point-to-point coaxial cable interface for the transmission of AES/EBU digital audio signals throughout television production and broadcast facilities. — The purpose of this standard is to... | |
| This standard describes a simple interface over which television equipment can report the occurrence of internal failures and faults in incoming signals. It is intended for use in all television... | |
| This standard describes an interface for a general purpose fiber optic connector for interconnection of television equipment. For information on testing for physically demanding applications, the reader is directed to... | |
| This standard describes how AC-4 data rate reduced (non PCM) audio streams conforming to ETSI TS 103 190 are packed into an AES3 data stream, following the methods described by... | |
| This standard describes how data rate reduced (non PCM) audio streams conforming to ETSI TS 102 114 are packed into an AES3 data stream, following the methods described by SMPTE... | |
| This standard describes the C4 Base58 character set, the format and construction of the C4 ID for a single contiguous unit of data (e.g. a file) and method of construction... | |
| This standard describes the data format for the interchange of a list of audio/video content decisions which specify an audio/video product. Exchange of this information allows the audio/video product to... | |
| This standard describes the data_type field defined in SMPTE 337. This field describes data types that may be carried in an AES3 digital audio interface according to SMPTE 337. This... | |
| This standard describes the data_type field defined in SMPTE ST 337. This field describes data types that may be carried in an AES3 digital audio interface according to SMPTE ST... | |
| This standard describes the electrical and physical characteristics of a 12G-SDI coaxial cable interface suitable for applications where the signal loss does not exceed an amount specified by the receiver... | |
| This standard describes the electrical and physical characteristics of a 6 Gb/s coaxial cable interface suitable for applications where the signal loss does not exceed an amount specified by the... | |
| This standard describes the minimum performance for a hybrid cable containing single-mode optical fibers and electrical conductors to convey signal and control in a variety of environments where moisture, weather,... | |
| This standard describes the physical interface and modulation characteristics for a synchronous serial interface to carry MPEG-2 transport bit streams at rates up to 40 Mb/s. It is a point-to-point... | |
| This standard describes the signal format of a digital vertical interval time code (D-VITC) suitable for use with the digital coding given in ANSI/SMPTE 125M (for 525-line, 59.94-Hz field rate,... | |
| This standard describes the unidirectional hypertext transfer protocol, or UHTTP. UHTTP is a one-way data transfer protocol that is designed to deliver resource data in a one-way broadcast-only environment. This... | |
| This standard extends the Y′C′1C′2(A) image format defined in SMPTE ST 2073-3 to include subsampled color difference components (including 4:2:2, 4:2:0, 4:1:1, and 4:1:0). An alpha channel is optional and... | |
| This standard is Part 1 of a series of documents that specify a general-purpose format for the storage and/or communication of information in bulk form. The format is named the... | |
| This standard provides a data representation for depth information. This information allows for simple interchange during production and post-production, and provides the essence for distribution of single-view and multi-view content. | |
| This standard provides a method for multiplexing camera positioning information into the ancillary data space described in SMPTE 291M. Applications of the standard include the 525-line, 625-line, component or composite,... | |
| This standard provides the mechanisms necessary to facilitate the transport of packetized data over a synchronous data carrier. The HD-SDTI data packets and synchronizing signals provide a data transport interface... | |
| This standard specifies a coding technique for the transmission of date and time zone information in the user groups of a time and control code signal. A two-digit hexadecimal code... | |
| This standard specifies a data reduction method for the MPEG-2 video recoding data set for SDTV as defined in SMPTE 327M. The coding information is as derived from an ISO/IEC... | |
| This standard specifies a directory index to classify various types of data to be recorded into the binary groups (user bits) of the SMPTE time and control code. The directory... | |
| This Standard specifies a file exchange format for the transfer of simple clips and compound clips between television program storage systems. This Standard provides documentation of formats and contents, including... | |
| This standard specifies a generic data model to represent the contents of the UL-based SMPTE registers. Examples of such registers are SMPTE 335M, SMPTE 395M or SMPTE 400M. — This... | |
| This standard specifies a method and data structures known as MXF - KLV-Encoded Extension Syntax (KXS), which can be used within files conforming to SMPTE ST 377-1 - Material Exchange... | |
| This Standard specifies a method for adding Dynamic Metadata for Color Volume Transform (DMCVT) as specified in SMPTE ST 2094-2 to IMF Applications. — This standard defines: • a DMCVT... | |
| This standard specifies a method for measuring the signal-to-noise ratio of 16- and 35-mm variable-area photographic audio records. | |
| This standard specifies a Precision Time Protocol profile specifically for the synchronization of audio/video equipment in a professional broadcast environment. — The profile is based on IEEE Std 1588-2008 and... | |
| This standard specifies a Reference White signal, and the absolute luminance level and chromaticity, including tolerances, that is to be produced by an HDTV display reproducing such a Reference White... | |
| This standard specifies a serial digital interface that operates at a nominal rate of 540 Mb/s. This standard has application in the television studio over lengths of coaxial cable where... | |
| This standard specifies a timing model for SMPTE ST 2110-10 video RTP streams as measured leaving the RTP sender, and defines the sender SDP parameters used to signal the timing... | |
| This standard specifies an embedded transport mechanism for the MPEG-2 recoding data set as defined in SMPTE 327M for the representation of MPEG-2 recoding information in ITU-R BT.656, 4:2:2 component... | |
| This standard specifies an embedded transport mechanism for the MPEG-2 recoding data set as defined in SMPTE 327M for the representation of MPEG-2 recoding information on a SMPTE 274M interface... | |
| This standard specifies an EOTF characterizing high-dynamic-range reference displays used primarily for mastering non-broadcast content. This standard also specifies an Inverse-EOTF derived from the EOTF. | |
| This standard specifies an interface format for the transport of MPEG-1 Layer I and II or MPEG-2 Layers I, II, and III audio in professional applications using the AES3 serial... | |
| This standard specifies an interface format for the transport of MPEG-2 AAC/HE AAC data rate reduced audio streams contained in the ADTS wrapper and placed into an AES3 serial digital... | |
| This standard specifies an interface format for the transport of non-PCM audio and data in professional applications using the AES3 serial digital audio interface. This standard includes both physical and... | |
| This standard specifies an open framework for encapsulating data packet streams and associated control metadata over the SDTI transport (SMPTE 305M). Encapsulating data packet streams on SDTI allows them to... | |
| This standard specifies data type specific format requirements for both AC-3 and E-AC-3 (“Enhanced AC-3”) data bursts carried within an AES3 interface according to SMPTE ST 337. | |
| This standard specifies data type specific format requirements for both AC-3 and Enhanced AC-3 data bursts carried within an AES3 interface according to SMPTE 337M. | |
| This standard specifies data type specific format requirements for caption data bursts carried within an AES3 interface according to SMPTE 337M. | |
| This standard specifies data type specific format requirements for several types of data bursts that may be carried within an AES3 interface according to SMPTE 337. Included are descriptions of... | |
| This standard specifies data type specific format requirements for several types of data bursts that may be carried within an AES3 interface according to SMPTE ST 337. Included are descriptions... | |
| This standard specifies data type specific format requirements for SMPTE 336M (KLV) data bursts carried within an AES3 interface according to SMPTE 337M. | |
| This standard specifies dimensions for the video tape cassette used with the 12.65-mm type D-9 digital component television recorder. | |
| This standard specifies dimensions for the width, thickness, and width deviation of raw tape stock used to record reference tapes for 1-in helical-scan video tape recorders. Conditions before testing and... | |
| This standard specifies dimensions for three sizes of cassettes (S, M, and L) for use with 1/2-in type magnetic tape cassette for television digital recorders (see annex B). | |
| This standard specifies dimensions for three sizes of cassettes (S, M, and L) for use with 19-mm television digital recorders. | |
| This standard specifies Dynamic Metadata for Color Volume Transform Application #3, Reference-based Color Volume Remapping. It is a specialization of the content-dependent transform metadata entries and processing blocks of the... | |
| This standard specifies elements and individual data items that may be used in the MXF Generic Container System Scheme 1 (SMPTE 394M). This standard allows additional new elements to be... | |
| This standard specifies extensions to the VC-5 Elementary Bitstream defined in SMPTE ST 2073-1 for representing R′G′B′(A) images, Y′C′1C′2(A) images without color difference component sub-sampling, and Color Filter Array (CFA)... | |
| This standard specifies format requirements for real-time Audio Metadata carried within an AES3 interface according to SMPTE ST 337. Audio Metadata is grouped into payloads for transport. This standard covers... | |
| This standard specifies frame- and clip-based mappings of a sequence of monoscopic ACES coded still pictures, as specified in SMPTE ST 2065-4, into the MXF generic container, as defined in... | |
| This Standard specifies how to carry the digital values resulting from defined standardized data streams carried in MPEG-2 Transport Streams (TS) as specified by either DVB/ETSI EN 301 775 or... | |
| This standard specifies numerous refinements based on SMPTE 379-1. This standard specifies the format of the MXF Generic Container (GC). The MXF GC is the native essence container of the... | |
| This Standard specifies parameters for the real-time, RTP-based transport of constant bit-rate compressed video over IP networks, referenced to a common reference clock. | |
| This standard specifies tapes and cassettes for the 1/2-in type M-2 helical-scan video tape recording system. | |
| This standard specifies test conditions, general video record system, video pole-tip locations, scanner parameters, scanner-guide locations, and the tape tension for 1-in type B helical-scan video tape reference recorders operating... | |
| This Standard specifies the allocation of audio channels to the audio tracks of a digital television recorder for purposes of identification, program distribution and interchange. These allocations are depicted as... | |
| This standard specifies the audio channel assignment, and the relative levels of the audio channels, for recordings of audio programs containing six audio channels, onto storage media for film sound. | |
| This standard specifies the basic formatting structure of the ancillary data space in digital video data streams in the form of 10 bit words. Application of this standard includes 525-line... | |
| This standard specifies the basic formatting structure of the ancillary data space in digital video data streams in the form of 10 bit words. Application of this standard includes, but... | |
| This standard specifies the characteristics and parameters for type H, helical-scan, 1/2-in video tape recorders operating with video signals as defined by ITU-R BT.470 and ANSI/SMPTE 170M, and having a... | |
| This standard specifies the common features of the format of sound and picture Tracks Files for distribution of D-Cinema content using the MXF file format. It defines data structures for... | |
| This standard specifies the Composition Playlist (CPL) for the Interoperable Master Format (IMF). The Composition Playlist is a representation of a single version of a finished IMF composition (feature, episode,... | |
| This standard specifies the compressed representation and decoding process for the core VC-5 bitstream. | |
| This standard specifies the compression constraints and bit-stream characteristics of an MPEG-2 video elementary stream operating at bit rates up to 50 Mb/s. One of the intended applications is to... | |
| This standard specifies the compression of a high-definition source format to a dual-channel packetized data stream format which is suitable for recording on disc and tape storage devices including type... | |
| This standard specifies the configuration and dimensions for reels intended for 1-in magnetic tape for television recording on helical-scan video recorders, as specified in ANSI/SMPTE 25M. | |
| This standard specifies the content of the picture related recoding data set for the representation of ISO/IEC 13818–2 MPEG coding information for the purpose of optimally cascading decoders and recoders... | |
| This standard specifies the content, format and recording method of the data blocks containing video, audio, and associated data which form the helical records on 6.35-mm tape contained in cassettes... | |
| This standard specifies the content, format, and modulation method of the longitudinal records contained in the cue track and the time-code track in 19-mm type D-1 television digital component recording. | |
| This standard specifies the content, format, and modulation method of the longitudinal records contained in the cue track and the time-code track in 19-mm type D-2 helical-scan cassette video recorders. | |
| This standard specifies the content, format, and recording method of the data blocks containing compressed video data, AES3 audio data, and associated data which form the helical records on 12.65-mm... | |
| This standard specifies the content, format, and recording method of the data blocks containing video, audio, and associated data that form the helical records on 12.65-mm tape in cassettes. In... | |
| This standard specifies the content, format, and recording method of the data blocks containing video, audio, and associated data which form the helical records on 12.65-mm (0.5-in) tape in cassettes... | |
| This standard specifies the content, format, and recording method of the data blocks containing video, audio, and associated data which form the helical records on 12.65-mm (0.5-in) tape. In addition,... | |
| This standard specifies the content, format, and recording method of the data blocks containing video, audio, and associated data which form the helical records on 6.35-mm tape in cassettes as... | |
| This standard specifies the content, format, and recording method of the data blocks forming the helical records on the tape containing video, audio, and associated data in 19-mm type D-1... | |
| This standard specifies the content-dependent color volume transform metadata items for Application #1, a specialized model of the generalized color volume transform defined by the core components document SMPTE ST... | |
| This standard specifies the content-dependent Color Volume Transform metadata set for Application #2, a specialized model of the color volume transform defined by the core components document SMPTE ST 2094-1. | |
| This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with two rows of 8-mm type R perforations and a perforation pitch of either 0.1500 in or 0.1497... | |
| This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a DH-type perforation and a perforation pitch of 0.1870 in (4.750 mm). | |
| This standard specifies the data format for interchange of a Packing List for Digital Cinema applications. — The electronic or physical form of a complete package described by a Packing... | |
| This standard specifies the data format for the System Item of the MXF Generic Container (GC) that is called System Scheme 1. This data format is a superset of the... | |
| This standard specifies the data structure and the transmission format of DV compressed video, audio, and data over a serial data transport interface (SDTI [SMPTE 305.2M]). The standard is a... | |
| This standard specifies the digital representation of the signal parameters of the 1125/60 high-definition production system as given in their analog form by ANSI/SMPTE 240M. — This standard also specifies... | |
| This standard specifies the dimensions and location of the audio, video, ancillary data, cue track, time code, and control-track records for 19-mm type D-2 helical-scan composite digital cassette television tape... | |
| This standard specifies the dimensions and location of the audio, video, and auxiliary data, analog cue track, time code, and control track records for 19-mm type D-1 television digital component... | |
| This standard specifies the dimensions and location of the cartridge aperture, pressure pad, and characteristics necessary for its appropriate flatness, clearance, and location of film in the camera aperture of... | |
| This standard specifies the dimensions and location of the video, audio, time code, and tracking-control records, as recorded by 1/2-in type L helical-scan video tape recorders operating with video signals... | |
| This standard specifies the dimensions and location of video, audio, and tracking-control records on reference tapes for 1-in type B helical-scan video tape recorders, operating on the 525/60 monochrome or... | |
| This standard specifies the dimensions and locations of the video, audio, time code, and tracking-control records, as recorded by 1/2-in type M-2 helical-scan video tape recorders operating with video signals... | |
| This standard specifies the dimensions for 16-mm motion-picture projection reels having capacities from 200- to 2300 ft (60- to 700 m) of film inclusive. | |
| This standard specifies the dimensions for 8-mm type R motion-picture reels used for projection having film capacities of 50, 100, 200, 400, 600, 800, and 1200 ft (15, 30, 60,... | |
| This standard specifies the dimensions for three types of 6.35-mm type D-7 and type D-12 tape cassettes (M, L, and EL) for use with digital recorders. — NOTE – The... | |
| This standard specifies the dimensions of 1-in video magnetic recording tape, and the direction of magnetic orientation. | |
| This standard specifies the dimensions of 8-mm type S motion-picture projection reels of 75-mm (2.95-in) diameter with a nominal film capacity of 15 m (50 ft) generally used for returning... | |
| This standard specifies the dimensions of a video cassette and a video magnetic tape intended for use with 1/2-in type G video systems operating at tape speeds of 40, 20,... | |
| This standard specifies the dimensions of a video cassette for use with a 3/4-in type E helical-scan video tape recording cassette system, operating at a tape speed of 95.3 mm/s... | |
| This standard specifies the dimensions of the 8-mm type S 200-ft (60-m) capacity motion-picture camera cartridge and cartridge-camera interface. Also specified are the dimensions of the take-up core drive opening... | |
| This standard specifies the dimensions of the camera aperture image and the relative positions of the vertical and horizontal centerlines of the intended image area with respect to the reference... | |
| This standard specifies the dimensions of the film image area intended for projection from a 15/70 special-venue motion-picture film, the placement of this area relative to the perforations and the... | |
| This standard specifies the dimensions of two types of 16-tooth intermittent sprockets for 35-mm motion-picture projectors. Other dimensions and definitions are given in annex A. — This standard is applicable... | |
| This standard specifies the electrical frequency response characteristics for analog photographic audio reproduction in motion-picture control rooms and indoor theatres. It is intended to assist in standardization of recording monitor... | |
| This standard specifies the format for the recording of type D-11 compressed pictures, four channels of AES3 data, and associated data which form helical records on 12.65-mm (0.5 in) tape... | |
| This standard specifies the format for the transport of content packages (CP) on the serial digital transport interface (SDTI). This format is abbreviated to the term SDTI-CP. The format is... | |
| This standard specifies the format of a Generic Container (GC) for XML timed text and Timed Text Track File for the distribution of timed text content using the Material Exchange... | |
| This standard specifies the format of a Timed Text Track File for the distribution of D-Cinema timed text content using the Material Exchange Format (MXF). The Track File is a... | |
| This standard specifies the format of the MXF generic container. The MXF generic container is the native essence container of the material exchange format (MXF) file body. The MXF generic... | |
| This standard specifies the formats of the elements and metadata used by the SDTI content package format standard (SDTI-CP). — This standard defines element and metadata formats where they are... | |
| This standard specifies the formatting for the recording of data blocks containing MPEG-2 compressed video, multiple channels of AES3 audio, and associated data which form helical records on 12.65-mm (0.5-in)... | |
| This standard specifies the Free Scale Gamut (FS-Gamut) and the Free Scale logarithmic transfer characteristics (FS-Log) for camera signals. The FS-Gamut consists of chromaticity coordinates of red, green, and blue... | |
| This standard specifies the frequency response and operating level for recorders and reproducers for audio 1 record for 2-in quadruplex video magnetic tape recording at 15 in/s and 7.5 in/s... | |
| This Standard specifies the layout of, and metadata in, files containing images that conform to SMPTE ST 2065-1, Academy Color Encoding Specification (ACES). | |
| This standard specifies the lens markings, focal length tolerances, mounting diameters, mechanical factors in mounting additional lens adaptors to lenses, and the preferred value steps in focal lengths for lenses... | |
| This standard specifies the location and dimensions of the magnetic recording stripes on 70-mm motion-picture film used for six-track magnetic audio release prints having a flat picture image with a... | |
| This standard specifies the location of the edges of the video, audio, and tracking-control records and the mechanical separation of the simultaneously recorded information of the video and audio records,... | |
| This standard specifies the magnetic tapes and video cassettes for the 1/2-in type L helical-scan video tape recorder system. | |
| This standard specifies the make-up or assembly of leaders and cue marks for 70-, 35-, and 16-mm motionpicture release prints for use in motion-picture theaters and screening rooms. | |
| This standard specifies the mapping of A-law coded audio into a sound essence track of the MXF generic container. A-law coding is a sample-by-sample coding defined by ITU G-711 and... | |
| This standard specifies the mapping of all AVC coding data as defined in ISO/IEC 14496-10 | Rec. ITU-T H.264 into the Material Exchange Format Generic Container (MXF-GC) based on the... | |
| This standard specifies the mapping of an ST 2098-2 Immersive Audio Bitstream into an MXF file for use within a Digital Cinema Package. The MXF Generic Container (GC), as described... | |
| This standard specifies the mapping of DV-DIF (digital interface format) data to an MXF generic container, which is suitable for the application of all variants of the DV specifications as... | |
| This standard specifies the mapping of essence and metadata conforming to SMPTE 326M to the MXF generic container. The MXF generic container is the native essence container for use in... | |
| This standard specifies the mapping of essence and metadata conforming to SMPTE ST 326 to the MXF Generic Container. The MXF Generic Container is the native Essence Container for use... | |
| This standard specifies the mapping of ISO/IEC 13818-7 and ISO/IEC 14496-3 AAC family compressed audio coding into the Material Exchange Format Generic Container (MXF-GC). It does not address mapping of... | |
| This standard specifies the mapping of MPEG streams, as identified by an ISO 13818–1 stream_id value, into the MXF generic container. This includes, but is not limited to, ISO 13818–2... | |
| This standard specifies the mapping of MPEG streams, as identified by an ISO 13818-1 stream_id value, into the MXF generic container. This includes, but is not limited to, ISO 13818-2... | |
| This standard specifies the mapping of the source image data defined in Table 1 onto a dual-link 1.5 Gb/s HD-SDI (Link A and Link B) in conformance with SMPTE ST... | |
| This standard specifies the mapping of type D-11 compressed picture data stream into the SDTI payload area (SMPTE 305.2M) together with the mapping of four channels of AES3 data and... | |
| This standard specifies the mapping of uncompressed pictures into the MXF generic container. This MXF body is suitable for the mapping of all sampling grids and sampling formats including but... | |
| This standard specifies the mapping of unspecified data into the Data Element of the MXF Generic Container for use within a Digital Cinema Package. The MXF Generic Container (GC) is... | |
| This standard specifies the mapping of various source image formats onto the 540 Mb/s serial digital interface. These formats include single link 4:4:4:4 component digital signals (525i/59.94 and 625i/50) as... | |
| This standard specifies the mapping of VC-5 image essence as a picture essence track of the MXF generic container in frame-wrapped, clip-wrapped, or custom-wrapped form. This standard includes the KLV... | |
| This standard specifies the mapping of vertical ancillary data packets (VANC) into the payload area of the DV-based 100 Mb/s digital interface format (DIF) structure VAUX DIF blocks as defined... | |
| This standard specifies the mapping of video and audio MPEG ES, as identified by an ISO/IEC 13818-1 stream_id value, as well as the carriage of data streams extracted from higher... | |
| This standard specifies the maximum dimensions of the film image area intended for projection from a 16mm motion-picture film perforated one or two edges as specified in ANSI/SMPTE 109, and... | |
| This standard specifies the maximum dimensions of the film image area intended for projection from a 35-mm motion-picture film using vertically positioned subframes for stereoscopic projection, and the placement of... | |
| This standard specifies the maximum dimensions of the film image area intended for projection from an 8/70 special-venue motion-picture film, and the placement of this area relative to the perforations... | |
| This standard specifies the measurement methods and characteristic electroacoustic frequency response of the B-chain of motion-picture dubbing theaters (mixing rooms), screening rooms, and indoor theaters whose room volume exceeds 125... | |
| This standard specifies the mechanism for the transport of MPEG-2 video recoding information as ancillary data packets in an ancillary data space — for example, through ITU-R BT.656 / SMPTE... | |
| This standard specifies the metadata for Color Volume Transform Application #4, Scene-based Color Volume Mapping. It is a specialization of the content-dependent transform metadata entries and processing blocks of the... | |
| This standard specifies the metadata items to specify the color volume (the color primaries, white point, and luminance range) of the display that was used in mastering video content. The... | |
| This Standard specifies the method of packing MPEG-4 AAC and MPEG-4 HE AAC data rate reduced audio streams contained in either an ADTS or an LATM/LOAS wrapper into an AES3... | |
| This standard specifies the nominal rates of travel of 2-in wide magnetic tape for quadruplex video magnetic tape recording. | |
| This standard specifies the packet format and transmission timing for DV-based 25 Mb/s, 50 Mb/s and 100 Mb/s data streams over an IEEE 1394 interface. This standard covers the source... | |
| This standard specifies the position, dimensions, and reproducing speed of the nominal 5.08-mm (0.200-in) center-position magnetic audio record on 16-mm motion-picture film. | |
| This standard specifies the position, dimensions, content, and exposure of human-readable, latent image information applied onto 35-mm color print film. This information is normally exposed onto the film at the... | |
| This standard specifies the principal properties of the magnetic tape used for 19-mm type D-1 television digital component recording. | |
| This standard specifies the principal properties of the magnetic tape used for the 19-mm type D-2 composite digital television format. | |
| This standard specifies the pulse code modulation (PCM) audio mode of encoding and recording system utilizing a 1/2-in type M-2 helical-scan video tape recorder operating with video signals having a... | |
| This Standard specifies the real-time, RTP payload based transport of SMPTE ST 291-1 Ancillary (ANC) Data packets related to digital video data streams, over IP networks, referenced to a common... | |
| This Standard specifies the real-time, RTP-based transport of AES3 signals over IP networks, referenced to a network reference clock. | |
| This standard specifies the real-time, RTP-based transport of PCM digital audio streams over IP networks by reference to AES67. An SDP-based signaling method is defined for metadata necessary to receive... | |
| This standard specifies the real-time, RTP-based transport of uncompressed active video essence over IP networks. An SDP-based signaling method is defined for image technical metadata necessary to receive and interpret... | |
| This standard specifies the recommended sizes and dimensions of raw stock cores for 8-, 16-, 35-, 65-, and 70-mm motion-picture films. | |
| This standard specifies the recorded characteristic of magnetic audio records on 35-mm four-track striped motion-picture release prints, when reproduced at 24 frames per second or approximately 90 ft (27 m)... | |
| This standard specifies the recorded characteristic of magnetic audio records on 70-mm striped motion-picture release prints, when reproduced at 120 perforations per second (approximately 112 ft [34 m] per minute... | |
| This standard specifies the recorded characteristic of magnetic audio records on 8-mm type S motion-picture prints and full-coat motion-picture magnetic film conforming to ANSI/SMPTE 149, running at the nominal speed... | |
| This standard specifies the recorded characteristics of magnetic records on 35-mm motion-picture film intended for reproduction at 24 frames per second, and on 16-mm motion-picture film intended for reproduction at... | |
| This standard specifies the reference viewing environment for picture quality evaluation of HDTV images. | |
| This standard specifies the spectral response of the photographic audio reproducer light source and receptor as a unit, including any optical filtering that can be interposed. The analog sound-track formats... | |
| This standard specifies the stream format of the MPEG-2 recoding data set for the representation of compressed ISO/IEC 13818–2 MPEG coding information, as used in applications requiring transport systems of... | |
| This standard specifies the track content, format, and recording method of the data blocks containing compressed video, AES3 audio data, and associated data which form the helical records on 12.65-mm... | |
| This standard specifies the transport of component 525-line interlaced, 525-line progressive, 625-line interlaced, and 625-line progressive scan source formats through SMPTE 292M, the bit-serial digital interface for high-definition television systems. | |
| This standard specifies the use and constraints for SMPTE ST 2022-6 streams in conjunction with the timing model of SMPTE ST 2110-10, including definition of a Synchronizing Timestamp derived in... | |
| This standard specifies the use of a derivative of a color black signal as a reference for the synchronization of all forms of composite or component, digital or analog equipment... | |
| This superseded document is published to support legacy applications: Superseded by ST 2021-1:2009. The Broadcast eXchange Format (BXF) defines the format and content of XML Messages for the interchange of... | |
| To amend SMPTE ST 2036-1 payload ID to include the two color primaries allowed for in SMPTE ST 2036-1, and to add RP 291-2 to the Bibliography. | |
| VC-2 is a video codec that includes parameter values to identify the complexity of the coded VC-2 bit-stream through the use of profiles and levels. These values provide a fast... |
| << Prev | Next >> |