IEEE - Institute of Electrical and Electronics Engineers, Inc. Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| (1.1) Specification — This practice specifies a photographic method of recording and measuring high-speed motion-picture image unsteadiness. (1.2) Image-steadiness methods — Existing image-steadiness methods are applicable to professional motion-picture cameras... | |
| (1.1) Specifications — This practice specifies the dimensions of transverse cemented splices on 16-mm and 8-mm type R motion-picture film. (1.2) Types — Two types of splices are specified: a... | |
| (1.1) Specifications — This standard specifies a method for the determination of speed of 16-mm, 8-mm type R, and 8-mm type S reversal color camera films intended for direct projection... | |
| (1.1) This practce specifies dimensions and tolerances for a double-frame 35-mm film clip and an associated 2×2-in mount which are intended to ensure that picture information is accurately and consistently... | |
| (1.1) This practice defines the allocation of virtual machine type numbers to machines operating within the ESbus or ESlan remote control protocols. (1.2) This practice is to be used in... | |
| (1.1) This practice defines the parameters for tape dropouts encountered in the reproduced FM signal of 1-in types B and C video magnetic recorders/reproducer s. (1.2) This practice is intended... | |
| (1.1) This practice defines the physical characteristics of an interface using three parallel channels for the interconnection of equipment operating with analog component HDTV signals. For ANSI/SMPTE 240M, the signals... | |
| (1.1) This practice describes a method (TAR) by which DPX files are organized on tape storage devices (and any other type of sequential block-oriented device.) (1.2) This practice describes the... | |
| (1.1) This practice describes a test film, the use of which is limited to the determination of the uniformity of scanning-beam illumination in 35-mm motion-picture audio reproducers. (1.2) This test... | |
| (1.1) This practice describes an alignment procedure for the consistent and repeatable alignment of television color picture monitors. (1.2) For critical evaluation of picture program material, the aligned monitor shall... | |
| (1.1) This practice describes the cross-modulation method of measuring high-frequency distortion introduced during the production of variable-area audio motion-picture release prints. Through measurements of distortion at various negative densities, it... | |
| (1.1) This practice describes the data format of a list of film-to-video transfers. This list may be stored and referenced to document the process of transferring pictures and sound from... | |
| (1.1) This practice provides measurement methods and recommended maximum levels for indoor background sound pressure levels in theaters and review rooms. The practice is limited to the noise of heating,... | |
| (1.1) This practice specifies a test film for quantitative measurements of 70-mm projector alignment and screen image quality. (1.2) This practice also describes the artwork and dimensions for a test... | |
| (1.1) This practice specifies a type U audio frequency test film to be used for adjusting the mechanical and electrical parameters of 16-mm motion-picture magnetic audio reproducers operating at 24... | |
| (1.1) This practice specifies a type U audio frequency test film to be used for adjusting the mechanical and electrical parameters of 35-mm motion-picture magnetic audio reproducers intended for striped... | |
| (1.1) This practice specifies parameters of the recorded information essential to the interchange of 2-in quadruplex video magnetic tape recording of monochrome and NTSC color signals for 525-line/60-field television systems. | |
| (1.1) This practice specifies standard definition (BT.601–5) video materials that are available at reproduction and administrative cost from SMPTE for use in evaluating digital television technology and processing. (1.2) It... | |
| (1.1) This practice specifies the dimensions and location of a scene-change notch or cueing spot for actuating the printer light-change mechanism when printing 35-mm, 16-mm, and 8-mm type S motion-picture... | |
| (1.1) This practice specifies the environmental and surround conditions that are required in television or video program review areas for the consistent and critical evaluation of 525-line, 59.94-field television signals... | |
| (1.1) This practice specifies the luminance (measured brightness) of the projection screens for drive-in theaters intended for the projection of motion-picture film at 24 frames/sec. (1.2) The practice defines luminance... | |
| (1.1) This practice specifies the polarity of the signal on the pin connections from a microphone presented with a positive pressure on the diaphragm. It also specifies the resulting positive... | |
| (1.1) This practice specifies the significant dimensions of mated cut splices for 16-mm and 8-mm type R motion-picture film made with an adhesive tape and intended for projection and exhibition. | |
| (1.1) This practice specifies the significant dimensions of splices for 70-, 65-, and 35-mm motion picture film in tended for projection and exhibition or for laboratory printing. (1.2) There are... | |
| (1.1) This practice specifies the subject material and the dimensions and location of the subject material for a 16-mm test film of high accuracy to assist the user in achieving... | |
| (1.1) This practice specifies the subject material and the dimensions and location of the subject material for an 8-mm type R test film of high accuracy to assist the user... | |
| (1.1) This practice, also known as the error detection and handling (EDH) system, describes the generation of error detection checkwords and related status flags to be used optionally in conjunction... | |
| (1.1) This recommended practice describes the proper method for use of sound test films, the reliability of the conclusions to be drawn from their output, the precautions necessary for reasonable... | |
| (1.1) This standard describes the composite analog color video signal for studio applications: NTSC, 525 lines, 59.94 fields, 2:1 interlace with an aspect ratio of 4:3. (1.2) This standard specifies... | |
| (1.1) This standard specifies the dimensions and location of 8-mm type S sound and silent motion-picture film camera cartridge notches intended to preset exposure devices automatically with respect to the... | |
| (1.1) This standard specifies the dimensions for 16-mm motion-picture camera spools having capacities from 50 ft to 400 ft (15 m to 120 m) of film. (1.2) This standard further... | |
| (1.1) This standard specifies the dimensions of the camera aperture image and its relative position to the reference edge and the perforations of 8-mm type S motion-picture film, as specified... | |
| (1.1) This standard specifies the dimensions of the image area produced by type W camera aperture on 16-mm motion-picture film intended for enlargement to nonanamorphic 35-mm motion-picture film with an... | |
| (1.1) This standard specifies the location and width dimensions of the exposed areas for picture and photographic audio on 35-mm motion-picture prints made on continuous contact printers. (1.2) This standard... | |
| (1.1) This standard specifies the maximum dimensions of the film image area intended for projection and its relative position to the reference edge and the perforations of 8-mm type S... | |
| (1.1) This standard specifies the maximum dimensions of the film image area intended for projection from a 35-mm motion-picture film and the placement of this area relative to the perforations... | |
| (1.1) This standard specifies the method of measurement of the photoelectric output factor of single photographic audio level test films in all film gauges, using a calibrating audio reproducer. It... | |
| (1.1) This standard specifies the position, dimensions, and reproducing speed of the magnetic audio record on 8-mm type S motion-picture film having a nominal 0.027-in (0.69-mm) width magnetic stripe. (1.2)... | |
| (1.1) This standard specifies the position, dimensions, and reproducing speed of the nominal 100-mil (2.54-mm) magnetic audio record on 16-mm motion-picture film. (1.2) This standard also specifies the longitudinal picture-audio... | |
| (1.1) This standard specifies the position, dimensions, reproducing speed, identity, and use of the four magnetic audio records on 35-mm motion-picture release prints. (1.2) The standard also specifies the longitudinal... | |
| (1.1) This standard specifies the position, dimensions, reproducing speed, identity, and use of the six magnetic audio records on 70-mm motion-picture release prints. (1.2) The standard also specifies the longitudinal... | |
| 1.1 The purpose of this practice is to specify the means to be employed in the calibration of densitometers utilized in the measurement of diffuse transmission densities. 1.2 This practice... | |
| 1.1 This practice describes the artwork and dimensions for constructing a test chart to be used as the original subject for the manufacture of the test film. 1.2 The practice... | |
| 1.1 This practice specifies the dimensions of the nominal safe action and safe title image areas for 8-mm release prints. The information provided applies to the use of these prints... | |
| 1.1 This practice specifies the film tension needed to transport 35-mm motion-picture film through a film-handling system operating under 0.9 m/s (180 ft/min) while minimizing conditions that contribute to film... | |
| 1.1 This practice specifies the method and factors to be considered when measuring and reporting the comparative shutter efficiency (remaining useful light) of 35- and 70-mm projectors. 1.2 The purpose... | |
| 1.1 This practice specifies the necessary handling changes in the laboratory, film exchange, and projection room to achieve the emulsion-in orientation of theatrical release prints. 1.2 The practice also describes... | |
| Amendment 1 to SMPTE RP 2057:2011 changes the Set Key and Scheme Label UL values for the Text-based Descriptive Metadata Scheme. The purpose of this change is to fix the... | |
| Applications to three-phase electrical utility systems are described in this Part VI of the IEEE C62.92™ series. Definitions and considerations related to system grounding where the dominant sources of system... | |
| Basic factors and general considerations in 1 selecting the class and means of neutral grounding for a particular ac transmission or subtransmission system are covered. An apparatus to be used... | |
| Basic factors and general considerations in selecting 1 the class and means of neutral grounding for a particular ac transmission or subtransmission system are covered. An apparatus to be used... | |
| Basic factors and general considerations in selecting the class and means of neutral grounding for a particular ac transmission or subtransmission system are covered. An apparatus to be used to... | |
| Basic factors and general considerations in selecting the class and means of neutral grounding for electrical generating plant auxiliary power systems are given in this guide. Apparatus to be used... | |
| conversion factors, International System, International System of Units, metric practice, metric system, rounding, SI, SI 10, Systeme International d'Unites | |
| Countries across the globe are implementing smart grids in order to achieve reductions in emissions, increased grid efficiency, increased usage of renewable energy sources, increased consumer control over their energy... | |
| Dolby Laboratories has developed a serial communication protocol that is used to transfer audio metadata between various products manufactured by Dolby. This document describes the types and function of the... | |
| Draft IEEE PC95.3.1-200X recommends techniques and instrumentation for the measurement and computation of electric, magnetic and electromagnetic (EM) fields in the near field of an electromagnetic field source. This Draft... | |
| Electromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, and average values for electrical and electronic equipment for various applications are provided. | |
| Elements of a radio frequency (RF) exposure safety program that provide reasonable and adequate guidance for preventing exposures in excess of recognized limits to electromagnetic fields from RF sources that... | |
| Format, dimensions, and optical densities are specified for a test pattern transparency to be used as an operational alignment tool for multiple-channel color television cameras. | |
| Format, dimensions, and optical densities are specified for a test pattern transparency to be used in the measurement of geometric distortion of television systems. | |
| Generally, the Broadcast eXchange Format (BXF) defines the format and content of XML Messages for the interchange of data and metadata among professional systems, as follows: — 1. Broadcast schedules,... | |
| Generally, the Broadcast eXchange Format (BXF) defines the format and content of XML Messages for the interchange of data and metadata among professional systems, as follows: (1) Broadcast schedules, including... | |
| Generally, the Broadcast eXchange Format (BXF) defines the format and content of XML Messages for the interchange of data and metadata among professional systems, as follows: 1. Broadcast schedules, including... | |
| Guidance for the use of the modern metric system is given. Known as the International System of Units (abbreviated SI), the system is intended as a basis for worldwide standardization... | |
| Guidance for the use of the modern metric system is given. Known as the International System of Units (abbreviated SI), the system is the basis for worldwide standardization of measurement... | |
| Guidance is provided to specifiers, users and manufacturers of surge-protective devices (SPDs) about the application considerations of SPDs to power distribution systems and associated equipment. This guide applies to SPDs... | |
| IEEE C95.7-1 20XX describes elements of a radio frequency (RF) exposure safety program that provide reasonable and adequate guidance for preventing exposures in excess of recognized limits to electromagnetic fields... | |
| IEEE Vision for Smart Grid Communications: 2030 and Beyond Reference Model, directly overlays events in the power grid with communication performance on the same spacetime model, it ensures a perspective... | |
| In 2012, CABA conducted the Impact of Smart Grid on Connected Homes Landmark Research study with the objective of greatly improving the understanding of residential Smart Grid development and deployment... | |
| Information that is useful in constructing test sites used to perform radiated emission measurements in the frequency range of 30 MHz to 18 GHz is provided. Final validity of a... | |
| It is the purpose of this practice to standardize the photographic and magnetic synchronizing signals and their position relative to the SMPTE Leaders for Television and Theatrical Presentation, as specified... | |
| It is the purpose of this practice to standardize the photographic and magnetic synchronizing signals and their position relative to the SMPTE Universal Leader, as specified in ANSI/SMPTE 55. | |
| Line trap inserted into a power line to provide a high impedance at power-line-carrier frequencies (30 kHz to 500 kHz) is applied in this standard. The purpose is to isolate... | |
| Methods for determining antenna factors of antennas used for radiated emission measurements in electromagnetic interference (EMI) control from 9 kHz to 40 GHz are provided. Antennas included are linearly-polarized antennas... | |
| Most video standards documents specify tolerances for individual picture blanking edges; center and aspect ratio are only implied by nominal blanking values, and vary as the blanking edges move within... | |
| NOTE: This Recommended Practice has been withdrawn. The information contained in it, with updates, has been incorporated into SMPTE ST 125:2013. — This practice describes a means of interconnecting digital... | |
| One of the primary goals of smart grid is to provide its consumers control over their energy consumption, with the help of real-time information, which in turn benefits both consumers... | |
| Recommendations to protect personnel in military environments against established adverse health effects associated with exposure to electric, magnetic, and electromagnetic fields, induced and contact current, and contact and arcing voltages... | |
| Recommended practices for the engineering and design of flexible and rigid bus connections for bus and equipment in electric power substations located in seismically active areas are provided in this... | |
| Requirements for measuring instruments used for EMI measurements are provided involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz | |
| Safety limits for the protection of persons against the established adverse health effects of exposures to electric, magnetic, and electromagnetic fields in the frequency range 0 Hz to 300 GHz... | |
| Since the publication of SMPTE 430-3-2008, “D-Cinema Operations Generic Extra-Theater Message Format”, the following amendments have been identified: The amendments have also been incorporated into SMPTE ST 430-3:2012. | |
| SMPTE 334M defines a mapping of data in vertical ancillary data packets. In particular, it refers to a packet named program description which is identified by the following combination of... | |
| SMPTE 334M defines a method of carrying program-related data in ancillary data packets. In particular, it defines a packet named VBI data which is identified by the following combination of... | |
| SMPTE RP 291-2009 is withdrawn and superseded by SMPTE ST 291:2010. All the information is now a register defined by the standard, so there is no longer a need or... | |
| Stability and preservation of audio magnetic recordings require attention to and precautions against all three of the following hazards: chemical degradation, physical distortion, and magnetic corruption. Analog and digital recordings... | |
| Standard Docs | |
| Symbols to inform people about the presence of potentially hazardous levels of radio-frequency energy or the presence of contact current hazards in the frequency range of 3 kHz to 300... | |
| Symbols to inform people about the presence of potentially hazardous levels of radiofrequency energy or the presence of contact current hazards in the frequency range of 3 kHz to 300... | |
| Terms associated with electromagnetic compatibility (EMC) and electromagnetic environmental effects (E3) are defined including electromagnetic pulse (EMP), and electrostatic discharge (ESD) terms. Quantities, units, multiplying factors, symbols, and abbreviations are... | |
| Terms, test methods, test circuits, measurement 1 procedures and preferred result values for the surge mitigation parameters of isolating transformers used in networking devices and equipment is set in this... | |
| Terms, test methods, test circuits, measurement procedures and preferred result values for the surge mitigation parameters of isolating transformers used in networking devices and equipment is set in this standard. | |
| The base document is separated into six chapters, each of which has a dedicated focus. However,several issues are discussed in multiple chapters. Considering the overlap of each chapter, thisroadmap is... | |
| The basic electrical parameters to be met by silicon PN junction voltage clamping components used for the protection of telecommunications equipment or lines from surges are defined in this standard. | |
| The Broadcast eXchange Format (BXF) defines the format and content of XML Messages for the interchange of data and metadata among professional systems, as follows: — 1. Broadcast schedules, including... | |
| The Broadcast eXchange Format (BXF) defines the format and content of XML Messages for the interchange of data and metadata among professional systems, as follows: (1) Broadcast schedules, including playout... | |
| The Broadcast eXchange Format (BXF) defines the format and content of XML Messages for the interchange of data and metadata among professional systems, as follows: 1. Broadcast schedules, including playout... | |
| The Broadcast eXchange Format (BXF) defines the format and content of XML Messages for the interchange of data and metadata among professional systems. | |
| The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. This guide gives methods for insulation coordination of different air-insulated systems like transmission lines... | |
| The complexity associated with quantitative assay and monitoring of aerosols and gasses can be substantial. This standard covers system design, manufacture, performance, testing, calibration, and maintenance requirements for noble gases,... | |
| The data element dictionary defines data elements, including their names, descriptions and identifiers, for association with essence or other metadata. A full explanation is contained in SMPTE ST 335. — | |
| The dimensions shown in this standard are for double 8-mm type R motion-picture film spools with a nominal capacity of 100 ft (30 m). These spools are used in cameras... | |
| The following topics are dealt with: controller management; motion control; events, states and I/O; exception handling; nodes, frames and attributes; position and orientation; mechanism parameters; and axis parameters. | |
| The goal of this roadmap is to stimulate discussion and challenge ideas around the deployment of power and energy technologies. The IEEE PES (Power & Energy Society) Horizon 2050 team... | |
| The IEEE Grid Vision 2050 Reference Model summarizes the main concepts defined in the IEEE Grid Vision 2050; such as, reference models for energy usage, energy delivery, and energy operations... | |
| The IEEE Vision for Smart Grid Communications: 2030 and Beyond provides a vision of the communications-relat ed aspects of the Smart Grid in the year 2030, and lays out the... | |
| The interactions of electromagnetic fields with biological systems are by their very nature extraordinarily variable. The standard addresses this variability in the research database and presents as seamlessly as possible... | |
| The neutral grounding of single and three-phase ac electric utility primary distribution systems with nominal voltages in the range of 2.4 kV34.5 kV is addressed. Classes of distribution systems grounding... | |
| The neutral grounding of single- a 1 nd three-phase ac electric utility primary distribution systems with nominal voltages in the range of 2.4 kV34.5 kV is addressed. Classes of distribution... | |
| The operational and performance requirements for transportable and/or mobile radiation monitors used in homeland security applications are specified in this standard. Transportable radiation monitors are designed to be transported to... | |
| The performance requirements for spectroscopy-based portal monitors are described in this standard. The requirements stated are based on portal monitors used in support of efforts associated with the U.S. Department... | |
| The present tables are intended as successors to the tables compiled and issued by the IPCEA in 1943. Those were based on work by the former National Electric Light Association... | |
| The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which... | |
| The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security... | |
| The purpose of this amendment is to add support for Progressive video systems with 48 and 48/1.001 Hz frame rates. The techniques described in this amendment follow the same rules... | |
| The purpose of this practice is to specify the relationship of the spacings of the exposure scale (horizontal coordinate) of graph paper on which sensitometric data are plotted and the... | |
| The purpose of this recommended practice is to provide an ad hoc test method to estimate the electromagnetic immunity of medical devices and help identify interference issues that might exist... | |
| The purpose of this specification is to define the necessary structures for the integration of VC-1 coded bitstreams in a file format that is compliant with the ISO Base Media... | |
| The purpose of this specification is to define the storage file format for SMPTE Layered Video Extension (VC-4) video streams which extends a file format that is compliant with the... | |
| The scope of this document is focused on computing technologies and the role they will play in the future electric grid. The computing technologies identified by the Computer Society Smart... | |
| The Smart Grid is a system of distributed systems whose domains span the more traditionaldomains of bulk generation, transmission, distribution, consumers, markets, and powerelectronics, with the growing penetration of relatively... | |
| The SMPTE labels register defined by this practice covers the use of SMPTE universal labels as individual items where the meaning of each label is conveyed by the content of... | |
| The title is updated to reflect a trial-use guide and two misspelled names in the participants list and a number in Equation (29) are corrected in this corrigendum. | |
| The transient overvoltages or surge events that are described and discussed in this guide are those that originate outside of a building or facility and impinge on a power distribution... | |
| The VC-2 video compression standard is an intra-frame video compression system defined through the VC-2 stream syntax, entropy coding, a coefficient unpacking process and a picture decoding process. The decoder... | |
| The VC-5 essence standard comprises the SMPTE standards designated SMPTE ST 2073-1, ST 2073-3, and ST 2073-4. — This recommended practice specifies the criteria and procedures for testing the conformance... | |
| The VC-5 essence standard comprises the SMPTE standards designated SMPTE ST 2073-1, ST 2073-3, ST 2073-4, ST 2073-5, and ST 2073-6. — This recommended practice specifies the criteria and procedures... | |
| This amendment adds a new sub-clause 4.5 1 Saturated core secondary winding parameters to IEEE C62.69(TM)-2016. Test methods, test circuits, measurement procedures, and result treatment to determine the secondary winding... | |
| This Amendment changes the wavelet filter used in SMPTE RP 2047-5 from “LeGall (5.3)” to “Haar with no shift”. | |
| This amendment to IEEE Std C95.1-2005 specifies ceiling values for induced and contact current requirements, clarifies distinctions between "localized exposure" and "peak power density." | |
| This amendment to IEEE Std C95.1-2005 specifies ceiling values for induced and contact current, clarifies the distinctions between localized exposure and spatial peak power density, and corrects other known technical... | |
| This ANSI ESD guide provides expanded explanations, best practices, and guidance for avoiding the pitfalls associated with ESD testing to IEC and other international ESD standards and should be considered... | |
| This corrigendum was not published as an individual standard, but was incorporated in C95.1-2019 | |
| THIS COURSE HAS BEEN DISCONTINUED. | |
| This dialect is intended to be used for the external control of routing switcher systems. | |
| This document defines filter coefficient sets for high-definition television format conversion between 4:2:2 image sampling and 4:2:0 image sampling for progressive and interlace images. The coefficients are applicable to a... | |
| This document defines how to carry text-based metadata with a specified text MIME type encoded using either Unicode UTF-8 or UTF-16 character encoding (such as XML) in a MXF file. | |
| This document defines the preferred method of converting from CEA-708 data as defined in CEA-708 into SMPTE-TT (as defined in SMPTE ST 2052-1). This document details how such a conversion... | |
| This document defines the Reference Projector and its controlled environment, along with the acceptable tolerances around critical image parameters for Review Room and Theatre applications. The goal is to provide... | |
| This document defines the specification of Content on an SSM (Solid State Media) Card defined in SMPTE RP 2006 for interoperability and interchange of this Content with other devices. The... | |
| This document defines the specification of the Solid State Media (SSM) Card. The physical specification provides the physical characteristics of the Card and the connector. The electrical interface between a... | |
| This document defines the syntax of a frame-based Dolby Atmos bit stream. The bit stream carries audio essence and metadata necessary to reproduce a complete audio program. | |
| This document defines the syntax of Professional Metadata (PMD). | |
| This document defines two serial interfaces which may be used to convey closed captioning streams. — The CDP Interface carries the CEA-708/SMPTE 334–2 Caption Distribution Packet (CDP). This is principally... | |
| This document describes a vendor-neutral common framework for implementing Interoperable Media Services using a Service Oriented Architecture (SOA) based system for use in broadcast, production, post production, media distribution, and... | |
| This document describes a vendor-neutral subset of the MXF file format to use for the long-term archiving and preservation of moving image and other audiovisual content, including all forms of... | |
| This document describes metadata sets for the grouping of professional video camera acquisition parameters with frame granularity. The metadata sets are coded using the SMPTE KLV coding protocol as defined... | |
| This document describes the IEEE PESs vision of the power system infrastructure into the year 2050. This document sets the stage and includes future scenarios, electricity generation (Make), electricity transmission... | |
| This document describes the protocols for carrying video elementary streams conforming to the SMPTE Layered Video Extension (VC-4) over MPEG-2 Transport Streams and MPEG-2 Program Streams. This document does not... | |
| This document describes the protocols for carrying video elementary streams conforming to the SMPTE VC-1 Simple, Main and Advanced Profile over MPEG-2 Transport Streams and MPEG-2 Program Streams. This document... | |
| This document describes the requirements for the key, alpha or matte signal with respect to its associated fill. In the remainder of the document the term “key” is used, but... | |
| This document details a set of recommended practices for the maintenance calibration and documentation of sound systems in dubbing stages (mixing rooms), screening rooms, and commercial cinemas to determine, and... | |
| This document highlights the role of control systems in the evolution of the Smart Grid. It includes an overview of research investigations that are needed for renewable integration, reliability, self-healing,... | |
| This document is focused on Protocol-related topics as they relate to BXF. The main BXF document (ST 2021-1) should be read first, and this part (ST 2021-2) should be considered... | |
| This document is the primary American National Standard on application of the metric system. It emphasizes use of the International System of units (SI), which is the modern, internationally accepted... | |
| This document outlines the architecture and structure of changes to the existing broadly used MPEG-2 transport stream specification to accommodate efficient transmission of uncompressed video over MPEG-2 transport stream. It... | |
| This document provides a single set of processes to complete baseline calibration and documentation of sound systems in dubbing stages (mixing rooms), screening rooms, and commercial cinemas to improve the... | |
| This document provides conformance test materials to be used to validate implementations of SMPTE ST 2112-10 Open Binding of IDs. | |
| This document provides conformance test materials to be used to validate implementations of SMPTE ST 2112-20 Open Binding of Distribution Channel IDs and Timestamps to Content (OBID-TLC). | |
| This document provides documentation of the BXF schemas specified in the associated Data Supplement, including schema changes and additional elements of BXF Version 6.0. | |
| This document provides information on the size of the ancillary data space in 8-bit and 10-bit 4:2:2 component HDTV systems and 10-bit 4:2:2 2048×1080 Production Image formats operating on 1.485... | |
| This document provides Recommendations for the level of reference signals that facilitate the interchange of audio content on analog, digital or photographic media, and for the calibration of audio level... | |
| This document recommends the digital audio sampling rate and use of emphasis for television operations. | |
| This document specifies an Application of the IMF framework specified in SMPTE ST 2067-2. The Application follows the Image Characteristics, Track File and Composition constraints specified in SMPTE ST 2067-21... | |
| This document specifies basic parameters and stream structure for AVC Intra-frame coding using the High 10 Intra profile and the High 4:2:2 Intra profile in compliance with ISO/IEC 14996–10 |... | |
| This document specifies basic parameters and stream structure for AVC Intra-frame coding using the High 10 Intra profile and the High 4:2:2 Intra profile in compliance with ISO/IEC 14996-10 |... | |
| This document specifies constraints on the technical parameters, file structure, file naming and other relevant information pertaining to audio essence delivered from final post-production as a Digital Cinema Distribution Master. | |
| This document specifies the mapping of all AVC coding data as defined in ISO/IEC 14496-10 | ITU-T Rec. H.264 into the Material Exchange Format Generic Container (MXF-GC) based on the... | |
| This document specifies the mapping of MPEG-2 Picture (ES) compatible with MPEG stream and AES3 audio into the MXF Generic Container. The MXF files created according to the details of... | |
| This document specifies the mapping of MPEG-2 Picture (ES), AES3 audio and ANC packets into the MXF Generic Container. The MXF files created according to the details of this specification... | |
| This document specifies the mapping of the VC-3 type compressed picture data stream into the SMPTE 305M SDTI payload area. The VC-3 type compressed picture data stream mapping is defined... | |
| This document specifies the material, procedures and criteria for verifying conformance of SMPTE VC-4 video decoders and bitstreams. | |
| This document specifies the materials, procedures and criteria for verifying conformance of SMPTE VC-1 video decoders and bitstreams. | |
| This document specifies the synchronization of two or more cameras in a Stereoscopic (S3D) or Multi-Camera Array moving image camera systems. | |
| This document specifies the testing procedures that shall be used to verify the conformance of SMPTE VC-3 video decoders and the conformance of VC-3 bitstreams. A description of the test... | |
| This document specifies the testing procedures to be used to verify the conformance of SMPTE VC-3 video decoders and the conformance of VC-3 bitstreams. A description of the test data... | |
| This document specifies: • a Reg-XML baseline data model for AAF data (Annex B); • rules for mapping AAF data to AAF Reg-XML file groups (Section 6). — An XSD... | |
| This guide describes the waveform of currents likely to exist on DC feeds to equipment located at the tops of towers due to a lightning strike, and the consequences of... | |
| This guideline provides a simple method for measuring the acoustical noise output of motion-picture cameras in use on the set of a production. The guideline applies to noise occurring in... | |
| This IEEE Vision for Smart Grid Communications: 2030 and Beyond Roadmap is a high-levelsupplement of the full vision document IEEE Vision for Smart Grid Communications: 2030 andBeyond. Communication is a... | |
| This metadata dictionary contents practice defines a registry of metadata element descriptions for association with essence or other metadata. A full explanation is contained in SMPTE 335M. — The metadata... | |
| This practice covers the size, type, and frequency of numbers placed on 16-mm release prints. The purpose of these numbers is usually to determine specific locations on multiple-copy release prints... | |
| This practice defines a mechanism for the carriage of registered private information encoded as KLV (key-length-value) in conformance with SMPTE 336M. | |
| This practice defines a standard manner for the delivery of SMPTE DDE content for both transport A (broadcast of triggers and pulling of data by the return channel) and transport... | |
| This practice defines decoder templates for the encoding of SDTI content packages (SDTI-CP) with MPEG coded picture streams. — The SDTI-CP comprises a standard for the package format and a... | |
| This practice defines terms, classifications, and conditions for the storage of motion-picture materials. | |
| This practice defines the architecture of the control message language used within a general-purpose communications channel of an interface system which transports data and control signals between equipment utilized in... | |
| This practice defines the changes to SMPTE 274M to implement various 1920 × 1080 progressive systems in their segmented frame format: 24sF, 25sF, and 30sF. Only the changes to the... | |
| This practice defines the data stream used for synchronous transmission of HD-D5 compressed video and audio data over 360 Mb/s serial digital interface (SDI) for the 525/60 system as defined... | |
| This practice defines the line number and line timing for the switching point of serial digital and analog interfaces carrying television and data payloads to minimize any disturbance in the... | |
| This practice defines the mapping of vertical ancillary (V-ANC) data packets within MPEG-2 video elementary streams conforming to the framework provided by SMPTE 328M. — The purpose of this practice... | |
| This practice defines the means of implementing opportunistic data flow control in a DTV MPEG-2 transport broadcast according to flow control messages defined in SMPTE 325M. An emissions multiplexer requests... | |
| This practice defines the spectral conditions defining the printing density gammas of motion-picture color negative and intermediate materials. It is not intended as a replacement for the status M density... | |
| This practice defines the supervisory protocol used within a general purpose communication channel of an interface system which transports data and digital control signals between equipment utilized in the production,... | |
| This practice defines the terms cartridge and cassette when applied to devices enclosing 8-mm motion-picture film intended for projection. It does not apply to enclosures or containers for unexposed 8-mm... | |
| This practice defines the type-specific messages which enable the transport of status monitoring and diagnostics protocol (SMDP) data as defined in SMPTE 273M bi-directionally over ESbus and ESlan. It defines... | |
| This practice describes a hierarchy of monitoring loudspeaker arrangements for single- and multi-channel sound systems used in high-definition electronic production. | |
| This practice describes a means for mapping SMPTE metadata and other data essence, encoded in the SMPTE KLV protocol, into MPEG-2 systems streams. Use of synchronized streams and their syntax... | |
| This practice describes a means for packing SMPTE metadata and data essence, encoded by the SMPTE KLV protocol, into SMPTE 291M ancillary data packets for transport. Packing of KLV encoded... | |
| This practice describes a means of packing unique material identification (UMID) label data or other program identification label data into SMPTE 291M ancillary data packets for transport. Other program identification... | |
| This practice describes a method for locating the safe action and safe title areas for television systems. This document is intended for application in program production where the image aspect... | |
| This practice describes a method of mapping images originating in aspect ratios different from 16:9 into a 16:9 scanning structure in a manner that retains the original aspect ratio of... | |
| This practice describes a test film and a method for subjective checking and demonstrating 16-mm motion-picture projection and audio performance. | |
| This practice describes a test film to determine the uniformity of scanning-beam illumination in 16-mm motion-picture photographic audio reproducers. (This test film is not intended to be used for the... | |
| This practice describes a way of decoding the digital audio control words embedded in audio sectors of the D-1 recorded tape. By the method described, recordings made by different interpretations... | |
| This practice describes how to extract 4 × 3 aspect ratio images from the center of a 16 × 9 aspect ratio television picture from a digital source. This practice... | |
| This practice describes methods for measuring jitter performance in bit-serial digital interfaces. The techniques are specifically suited for jitter specifications that follow the form described in SMPTE RP 184. | |
| This practice describes techniques for specifying jitter in self-clocking, bit-serial digital systems. It is applicable to sources, receivers, and regenerators. It is specifically intended for, but not limited to, ANSI/SMPTE... | |
| This practice describes the content and dimensions of the image on a 35-mm motion-picture test film intended for alignment and evaluation of 35-mm motion-picture projection. This practice also gives procedures... | |
| This practice describes the data format of a list generated by electronic film editing systems to be used as the master reference for a film negative cutter when conforming the... | |
| This practice describes the format of a key video signal which is used to control the contribution of an associated fill video signal into a composite of two or more... | |
| This practice describes the format, dimensions, and contrast required to make diagnostically significant measurements of the display and camera system resolution for both digital and analog monochrome signal sources. (See... | |
| This practice describes the format, dimensions, and optical densities for a test pattern transparency to be used as an operational alignment tool for television systems. | |
| This practice describes the means of interconnecting digital video equipment operating in system M (525/60) and complying with the 4:4:4 encoding parameters as defined in CCIR Recommendation 601-2, annex 1... | |
| This practice describes the mechanism for the transfer of control messages between tributaries used within a general-purpose communications channel of an interface system which transports data and digital control signals... | |
| This practice describes the requirements for the generation of bar code labels for the automatic identification of type D-1 component and type D-2 composite cassettes. Dimensions and tolerances of the... | |
| This practice describes the type-specific messages used for the control of video tape recorder devices. Video tape recorder type-specific messages are used to provide the means for the control and... | |
| This practice details and defines the control message subset common messages. Common messages are used to perform certain functions common to all equipment types within a general-purpose communications channel of... | |
| This practice details and defines the control message subset for the system service level. System service messages are used to perform system functions within a general-purpose communications channel of an... | |
| This practice details and defines the type-specific messages used for the control of analog audio tape recorder devices. These type-specific messages provide the means for the control and monitoring of... | |
| This practice establishes the relative locations of critical elements in the path of the tape between the input and output guides for 2-in (51-mm) quadruplex video magnetic tape recorders operating... | |
| This practice identifies image motion, classifies the practical limits of acceptability of film jump and weave, and recommends a method of measurement for projection of 70-, 35-, and 16-mm motion-picture... | |
| This practice is intended to define the numerical procedure for deriving reference video signals for television camera evaluation. A standard reflection test pattern is assumed and the signal levels computed... | |
| This practice is intended to define the numerical procedures for deriving basic color equations for color television and other systems using additive display devices. These equations are first, the normalized... | |
| This practice is intended to provide an audio sector time code (ASTC) and an equipment type information (ETI). The ASTC can assist the D-1 DTTR to accurately read time code,... | |
| This practice proposes a means of implementing opportunistic data flow control in a DTV MPEG-2 transport broadcast using the flow control messages defined in SMPTE 325M. This practice defines an... | |
| This practice provide dimensions and specifications for the design of sprockets used with 8-mm type R (regular 8) motion-picture raw stock or processed film. | |
| This practice provides dimensions and specifications for the design of sprockets used with 16-mm motionpicture raw stock or processed film. | |
| This practice provides guidance to technical managers, archivists, and technicians for the care, storage, operation, handling, and shipping conditions that help maximize life expectancy and interchange performance for television (video)... | |
| This practice provides guidelines for head and tail leaders on 8-mm type R and 8-mm type S motion-picture release prints intended for use in continuous-loop cartridges. | |
| This practice provides the dimensions and specifications for the design and maximum pitch of sprockets used with 8-mm type S motion-picture raw stock or processed film. | |
| This practice recognizes that proper lubrication of 35-mm motion-picture prints is needed to promote good projection performance. Proper lubrication will result in improved steadiness, reduction of noise in the projector... | |
| This practice recognizes that surface treatment of 16- and 8-mm motion-picture prints to reduce the film surface friction coefficient is needed to promote good projection performance. The use of such... | |
| This practice recommends the allocation of stereo audio tracks on quadruplex television tape recorders employing a split audio head, 1-in types B and C, 3/4-in type E, and 1/2-in types... | |
| This practice recommends the relative polarity of the signals of the two audio channels of stereo television magnetic tape recorders for the purpose of stereo program exchange. | |
| This practice reserves the section of the audio record available for routine audio tests on negative photographic audio records. The position specified is for audio records in the editorial or... | |
| This practice specifies a color bar pattern compatible with both high- and standard-definition environments. The multi-format color bar signal is originated as an HDTV signal with an aspect ratio of... | |
| This practice specifies a color bar pattern compatible with both high- and standard-definition environments. The multi-format color bar signal originates as an HDTV signal with an aspect ratio of 16:9... | |
| This practice specifies a measurement method and wideband sound pressure levels for motion-picture dubbing theatres, review rooms, and indoor theatres using steady state wideband pink noise methodology. Together with SMPTE... | |
| This practice specifies a method for measurement of screen gain. | |
| This practice specifies a method of coding an auxiliary time address into the binary groups of SMPTE time and control codes, thus providing a second time address storage and storage... | |
| This practice specifies a method of coding data into the binary user groups of time and control codes for motion-picture systems. The type of data recorded is useful in the... | |
| This practice specifies a method of coding film position, film frame to video frame phase relationship, transfer sync points, and production related data into binary groups of SMPTE time and... | |
| This practice specifies a method of encoding video tape time code, film edge numbers, and production time code into three vertical interval time code lines. This practice is intended for... | |
| This practice specifies a test film for checking the lateral position of the audio scanning beam in 35-mm motion-picture photographic audio reproducers. | |
| This practice specifies a test film for checking the lateral position of the sound scanning beam in 16-mm motion-picture photographic audio reproducers. | |
| This practice specifies a test film for determining the presence of flutter in 16-mm motion-picture magnetic audio reproducers operating at approximately 36 ft (11 m) per minute. | |
| This practice specifies a test film for determining the presence of flutter in 16-mm motion-picture photographic audio reproducers operating at 36 ft (11 m) per minute. | |
| This practice specifies a test film for determining the presence of flutter in 35-mm motion-picture magnetic audio reproducers operating at 96 perforations per second or approximately 90 ft (27 m)... | |
| This practice specifies a test film for determining the presence of flutter in 35-mm motion-picture photographic audio reproducers operating at 90 ft (27.4 m) per minute. | |
| This practice specifies a test film for determining the presence of flutter in 35-mm motion-picture studio magnetic audio reproducers operating at 96 perforations per second or approximately 90 ft (27... | |
| This practice specifies a test film for quantitative measurements of 70-mm projector alignment and screen image quality. This practice also describes the artwork and dimensions for a test chart to... | |
| This practice specifies a test film for the alignment of anamorphic attachments or lenses for 35-mm motionpicture projectors. | |
| This practice specifies a test film for use in aligning the azimuth of magnetic head gaps in 16-mm motion-picture audio projectors operating at approximately 36 ft (11 m) per minute. | |
| This practice specifies a test film for use in aligning the azimuth of magnetic head gaps in 35-mm motion-picture audio reproducers operating at 90 ft (27 m) per minute and... | |
| This practice specifies a test film for use in focusing the scanning beam of 16-mm motion-picture photographic audio reproducers operating at 36 ft (11 m) per minute. | |
| This practice specifies a test film for use in focusing the scanning beam of 35-mm motion-picture photographic audio reproducers operating at 90 ft (27.4 m) per minute. | |
| This practice specifies a test procedure for classification of the depth of focus of a projection system. | |
| This practice specifies a type U (see 6.1) audio frequency test film to be used for adjusting the sensitivity and frequency response of 35-mm motion-picture magnetic studio audio reproducers operating... | |
| This practice specifies a video and audio reference tape to be used with 1-in type B helical-scan video tape recorders as defined in ANSI/SMPTE 15M. It is to be used... | |
| This practice specifies an audio frequency test film to be used for adjusting the sensitivity and frequency response of 70-mm striped six-track motion-picture magnetic audio reproducers intended for release prints... | |
| This practice specifies digital code formats and modulation methods for motion-picture film to be used for timing, control, editing, and synchronization purposes. This practice also specifies the relationship of the... | |
| This practice specifies digital test signals suitable for evaluating the low-frequency response of equipment handling high-definition serial digital video signals as defined in ANSI/SMPTE 292M. Although a range of signals... | |
| This practice specifies digital test signals suitable for evaluating the low-frequency response of equipment handling serial digital video signals as defined by ANSI/SMPTE 259M. These test signals are fully valid... | |
| This practice specifies magnetic video reference tapes for subjective evaluation of receiver or monitor setup and overall performance of video and audio derived from 3/4-in type E and 1/2-in types... | |
| This practice specifies parameters of the recorded information essential to the interchange of 1-in type C helical-scan television tape recordings of the 525/60 monochrome or NTSC color systems. The parameters... | |
| This practice specifies the amplitude of a reference signal to be used to facilitate the interchange of digital audio signals or recordings or for the calibration of audio level indicators... | |
| This practice specifies the characteristics of the tracking-control record and the relationship between the recorded video and tracking-control signal for 1-in type C helical-scan television tape recorders operating on 525/60... | |
| This practice specifies the chromaticity values of the red, green, and blue visible radiation emitted by the primaries and the chromaticity of the white point for professional monitors used in... | |
| This practice specifies the content and dimensions of an 8-mm type S test film useful in checking the performance of motion-picture projectors and printers. Its use is described in annex... | |
| This practice specifies the content and location of information to appear on the edge of 35-mm release prints. As continuous platters become more prevalent, projectionists sometimes fail to resplice the... | |
| This practice specifies the dimensions for 16-mm motion-picture camera spindles. | |
| This practice specifies the dimensions for 16-mm motion-picture projector reel spindles. | |
| This practice specifies the dimensions for 8-mm type S motion-picture projector reel spindles. | |
| This practice specifies the dimensions for an insertion pivot used for mounting studio lighting units on standing or hanging support devices, the mating holders for the insertion pivot, and the... | |
| This practice specifies the dimensions of 5/16-in and 1/2-in spindles for both 35-mm and 70-mm motion-picture rewinds. | |
| This practice specifies the dimensions of cemented splices on 8-mm type S motion-picture film primarily intended for projection. | |
| This practice specifies the dimensions of mated cut splices on 8-mm type S motion-picture film made with an adhesive tape and intended only for projection. | |
| This practice specifies the enlargement/reductio n ratios to be used in copying motion pictures from one film size to another while maintaining the aspect ratio and composition of the original... | |
| This practice specifies the file and directory structure of 3-1/2 in floppy disks used for storage and interchange of edit decision lists (EDLs). The specification is by reference to International... | |
| This practice specifies the file and directory structure of an 8-in flexible diskette used for the interchange of edit decision lists (EDL). | |
| This practice specifies the format, dimensions, and optical densities for a test pattern for safe action and safe title areas for television systems. | |
| This practice specifies the format, dimensions, and optical densities for a test pattern to be used as an operational check of the mid-frequency response of a television system. | |
| This practice specifies the format, dimensions, and optical densities for a test pattern transparency to be used as an operational tool for measurement of television film projector image stability. | |
| This practice specifies the format, dimensions, and optical densities of a test and alignment chart for 3-perforation 35-mm motion-picture film. The image is designed for use as an operational alignment... | |
| This practice specifies the lateral location and dimensions of a photographic control and data record on 16-mm motion-picture originals, intermediates, and prints, the width scanned by the control and data... | |
| This practice specifies the lateral location and dimensions of a photographic control and data record on 35-mm motion-picture camera negatives, the width scanned by the control and data recorder and... | |
| This practice specifies the lateral location and dimensions of a photographic control and data record on 35-mm motion-picture release prints, the width scanned by the control and data reproducer, and... | |
| This practice specifies the left- and right-channel assignments for stereo usage on magnetic film masters intended for transfer to video media. It also gives recommended test signals for use on... | |
| This practice specifies the luminance (photometric brightness) and color quality of projection illumination in review rooms for prints on motion-picture film intended for ultimate use as slides or film strips. | |
| This practice specifies the measurement methods and wide-band sound pressure levels for motion-picture dubbing theatres, review rooms, and indoor theatres. Together with SMPTE 202M, it is intended to assist in... | |
| This practice specifies the method of electronic dropout detection and counting for 2-in quadruplex video magnetic tape recordings made in accordance with practice HB of SMPTE RP 6. | |
| This practice specifies the optimum installation parameters for gains screens used in motion-picture theaters. | |
| This practice specifies the procedure for a complete set of screen luminance measurements in theaters, intended to promote measured luminance uniformity that is widely acceptable to the audience. | |
| This practice specifies the procedure for unambiguously identifying film frames which have been exposed on film stock carrying latent-image key numbers of an incompatible repetition rate. — Particular examples are... | |
| This practice specifies the recorded dimensional relationships among (a) tracking-control signal, (b) frame pulse signal, and (c) vertical synchronizing signal for 2-in (50.8 mm) quadruplex video magnetic tape recordings. | |
| This practice specifies the recorded relationships among the tracking control signal, the edit pulse signal, and the video signal for 1-in type B helical-scan video tape recordings. | |
| This practice specifies the recorded signal and the conditions for recording the time and control code on 1-in type B helical-scan video tape recorders as specified in ANSI/SMPTE 12M. | |
| This practice specifies the reference frequencies for deviation of the frequency modulated carrier and associated video preemphasis characteristic for 3/4-in type E helical-scan video tape cassette recording of 525-line monochrome... | |
| This practice specifies the screen luminance level and characteristics of the projection screen and the viewing conditions for 8-mm review rooms. | |
| This practice specifies the significant requirements for tape splices for 35-, 16-, and 8-mm type S magnetic motion-picture film intended for audio recording. | |
| This practice specifies the spatial alignment for video compression (bit-rate reduction) encoders and decoders, including but not limited to MPEG-2, MPEG-4 Part 10 (AVC) and SMPTE VC-1. Both standard-definition and... | |
| This practice specifies the spectral response of the photographic audio reproducer light source and receptor as a unit, including any optical filtering that may be interposed. | |
| This practice specifies the structure and parameters of the data for interfacing MPEG-2 4:2:2 profile and digital audio in the professional environment. — The purpose of this practice is to... | |
| This practice specifies the tape speed, scanner parameters, tape tension, and test conditions for achieving the record dimensions specified in ANSI/SMPTE 229M. The parameters are for reference purposes only and... | |
| This practice specifies the tape vacuum guide configuration and position for quadruplex video recordings on 2-in magnetic tape, and the test conditions for verifying these parameters. | |
| This practice specifies the technique of measuring, by the intermodulation method, the signal distortion introduced by audio systems. | |
| This practice specifies the video recording system, scanner parameters, and test conditions for 1/2-in type M-2 helical-scan video tape recorders operating with video signals having a typical scanning structure of... | |
| This practice specifies the video reference frequencies to which the carrier is deviated and the associated video preemphasis for 1-in type B helical-scan television tape recording. (The video deemphasis to... | |
| This practice specifies two audio frequency test films to be used for adjusting the sensitivity and frequency response of 8-mm type S motion-picture magnetic audio reproducers; one operating at 24... | |
| This purpose of this amendment is correct errors in the original SMPTE RP 2092-1:2015. | |
| This purpose of this amendment is to correct byte translation typographical errors. | |
| This RDD describes the ‘Low Latency Video Codec’ (LLVC) and related technical information; in particular, a description is given of an example decoder implementation with sub-sampling scheme of 4:2:2 and... | |
| This RDD is for media at the integer or fractional base-rates of 24, 24/1.001, 25, 30, 30/1.001 Hz and their integer multiples. This RDD describes a UTC Compensated Count (UCC)... | |
| This RDD provides the specification for implementing an MXF OP-1b file that encapsulates AVC Long GOP and AVC Intra VBR video essence, uncompressed PCM audio essence in chunk, and data... | |
| This RDD specifies the MXF mapping of XAVC, i.e. MPEG-4 AVC picture, AES3 audio and ANC packets into the MXF Generic Container or MXF Constrained Generic Container, and two types... | |
| This Recommended Practice assists in assessing the subjective loudness of short duration motion picture material, typically commercials and trailers that do not exceed three minutes in length. It does not... | |
| This Recommended Practice contains specifications and other information that will allow equipment to transport, record, or otherwise convey without corruption AES3 signals containing non-PCM data, including data streams formatted according... | |
| This Recommended Practice covers the use of SMPTE's Open ID (OBID and OBID-TLC) binding as applied to the Audience Measurement use case. | |
| This Recommended Practice defines constraints on the VC-2 video compression specification such that 10-bit high definition video signals can be compressed to only occupy the bit rate of 8-bit standard... | |
| This recommended practice defines constraints on the VC-2 video compression specification such that 10-bit high definition video signals may be compressed to only occupy the bit rate of 8-bit standard... | |
| This recommended practice defines constraints on the VC-2 video compression specification such that 10-bit ultra-high definition video signals can be compressed to only occupy the bit rate of 8-bit high... | |
| This recommended practice defines constraints on the VC-2 video compression specification to provide a mezzanine level compression coding. It defines coding constraints such that source video of 1920 × 1080... | |
| This Recommended Practice defines mappings of full-range digital images to and from (i) digital image formats and interfaces that rely upon protected values, e.g. for synchronization, and (ii) narrow-range digital... | |
| This recommended practice defines the file formats, file naming conventions, file sequences, and metadata for the interchange of uncompressed picture files that make up the Digital Cinema Distribution Master (DCDM),... | |
| This Recommended Practice defines the UMID Application Principles that must constitute the basis of any UMID application, and recommends several points on UMID use that must be carefully considered for... | |
| This Recommended Practice describes methods for measuring jitter performance in bit-serial digital interfaces. The techniques are specifically suited for jitter specifications that follow the form described in SMPTE RP 184. | |
| This Recommended Practice describes techniques for specifying jitter in self-clocking, bit-serial digital systems. It is applicable to sources, receivers, and regenerators. It is specifically intended for, but not limited to,... | |
| This Recommended Practice describes the recommended application of the SMPTE Unique Material Identifier (UMID) specified in SMPTE 330M when used in content production and broadcast environments. The UMID is one... | |
| This recommended practice document defines the preferred method of converting from CEA-608 data streams to SMPTE-TT (as defined in SMPTE ST 2052-1). This document details how such a conversion can... | |
| This recommended practice has the following objectives: • Describe the types of messages that will be communicated amongst applications and their corresponding formats within BXF SMPTE 2021. • Describe the... | |
| This recommended practice has the following objectives: Describe the types of messages that will be communicated amongst applications and their corresponding formats within BXF SMPTE 2021. Describe the aspects of... | |
| This Recommended Practice is intended to provide a method of coding the Video Index Information data structure in 525-line and 625-line component digital video signals so that various picture and... | |
| This recommended practice is intended to specify the source images and make-up of leaders and use of sound synchronization cue marks and tones as part of a Digital Cinema Distribution... | |
| This recommended practice presents a rationale and recommendations for developing emission limits and immunity test levels. These limits and levels are representative of current practice and user needs. Emission limits... | |
| This Recommended Practice provides documentation of the BXF SDK, a set of DLLs provided alongside this document, intended to facilitate improved interoperability among Traffic and Automation Systems. | |
| This Recommended Practice specifies a Descriptive Metadata Scheme (as specified in SMPTE ST 377-1 and SMPTE ST 377) that allows an EIDR Identifier (as specified in SMPTE RP 2079) to... | |
| This recommended practice specifies a method of mapping video time code, film edge numbers, production audio time code and other production data into the Vertical Ancillary (VANC) Data Space of... | |
| This recommended practice specifies color bar patterns compatible with 2048 × 1080 formats, 3840 × 2160 formats, 4096 × 2160 formats and 7680 × 4320 formats having standard dynamic range. | |
| This Recommended Practice specifies methods to be used for routine measurements and calibration of absolute luminance levels and white point chromaticity produced by HDTV Displays that are intended to reproduce... | |
| This Recommended Practice specifies Safe Areas that should be used when composing 16:9 images that will be presented on both 4:3 and 16:9 aspect ratio displays. The choice of whether... | |
| This Recommended Practice specifies the mapping of the Multi-link 10 Gb/s SDI data as defined in SMPTE ST 2036-4 to the fibers of the ruggedized fiber-optic connectors as defined in... | |
| This recommended practice specifies the procedures for testing the conformance of VC-5 encoder and decoder implementations to SMPTE ST 2073-1 and the test materials used for conformance testing. — The... | |
| This Registered Disclosure Document (RDD) describes how Dolby® E data rate reduced (non-PCM) audio streams are packed into an AES3 data stream, following the methods described by SMPTE ST 337. | |
| This Registered Disclosure Document (RDD) specifies the mapping of ProRes bitstreams into a subset of the MXF Generic Container (SMPTE ST 379-2). This document also defines application restrictions. The ProRes... | |
| This roadmaps parent document, IEEE Vision for Smart Grid Controls: 2030 and Beyond, discusses many topics that outline the evolution of the Smart Grid and the opportunities and challenges that... | |
| This SMPTE Registered Disclosure Document (RDD) includes specifications for the Apple ProRes bitstream syntax, the bitstream element semantics, and the decoding process used to produce decompressed images. A reference implementation... | |
| This SMPTE Registered Disclosure Document (RDD) specifies a hierarchical packing method for essence data in general (Part 1), as well as a method for the lossless wrapping of image essence... | |
| This SMPTE Registered Disclosure Document (RDD) specifies a method for wrapping isochronous streams of XML documents in a manner consistent with the Interoperable Master Format (IMF) Essence Component. Only a... | |
| This specification defines specific text and binary representations for digital object identifier (DOI) names and Entertainment ID Registry (EIDR) Identifiers. It also defines dictionary entries, e.g. types and elements, for... | |
| This specification defines specific text and binary representations for the Ad-ID identifier. It also defines dictionary entries, e.g. types and elements, for use in MXF and other KLV-based applications. | |
| This specification specifies the use of an Ad-ID and EIDR Identifiers as alternate identifier in SMPTE ST 2021-1 Broadcast Exchange Format (BXF) and ATSC A/76B Programming Metadata Communication Protocol (PMCP). | |
| This standard applies to power-line carrier line-tuning equipment connected between the coupling capacitors and power-line carrier transmitter/receiver terminals operating in the frequency range of 30 to 500 kHz over power... | |
| This standard applies to surge protectors for application on multiconductor and coaxial, balanced or unbalanced, data, communications, and signaling circuits with voltages less than or equal to 1000 V rms,... | |
| This standard applies to Surge-protective Devices (SPDs) intended to be installed on the load side of the service equipment connected to 50 Hz or 60 Hz AC power circuits rated... | |
| This standard contains performance specifications and testing methods for the evaluation of hand-held instruments (also known as Radionuclide Identification Devices or RIDs) for the detection and identification of radionuclides, which... | |
| This Standard defines a method of coding that allows Active Format Description (AFD) and Bar Data information to be carried in the 10-bit vertical ancillary (VANC) data space of a... | |
| This Standard defines a method of coding that allows Active Format Description, Bar Data and Pan-Scan information to be Key-Length-Value (KLV) coded. — Associated standards, SMPTE 2016-1 defines the format... | |
| This Standard defines a method of coding that allows Pan-Scan information to be carried in the 10-bit vertical ancillary (VANC) data space of a standard definition or high definition bit-serial... | |
| This standard defines a transmission format for conveyance of linear (LTC) or vertical interval (VITC) time code data formatted according to SMPTE 12M-1 in 8-, 10-, or 12-bit digital television... | |
| This standard defines a transmission format for conveyance of linear (LTC) or vertical interval (VITC) time code data formatted according to SMPTE ST 12-1 in 8-, 10-, or 12-bit digital... | |
| This Standard defines Active Format Description (AFD) and Bar Data for origination and conveyance through the production and distribution processes for standard definition or high definition television signals. AFD and... | |
| This standard defines an interface for system M (525/60) digital television equipment based on ITU-R BT.601. The standard has application in the television studio over distances up to 300 m... | |
| This standard defines an XML representation for data that is registered in the SMPTE metadata registers (SMPTE ST 395, SMPTE ST 335, SMPTE ST 2003 and SMPTE ST 400). The... | |
| This standard defines one of two methods for mapping the serial audio metadata stream related to encoded audio bitstreams into the 10-bit vertical ancillary (VANC) data space of a standard... | |
| This standard defines one of two methods of mapping the serial audio metadata stream related to encoded audio bitstreams into the 10-bit vertical ancillary (VANC) data space of a standard... | |
| This Standard defines Pan-Scan information for origination and conveyance through the production and distribution processes for standard definition or high definition television signals. — Associated standards define how this information... | |
| This Standard defines the basic structure and timing requirements of an asynchronous serial audio metadata stream with respect to an associated video signal. These requirements apply to the serial metadata... | |
| This standard defines the digital video coding for 4:4:4 and 4:2:2 color spaces and a virtual parallel interface for 525/625-line interlaced systems. Two luma sampling rates are defined: 13.5 MHz... | |
| This standard defines the structure of a dictionary of types for all registers defined by SMPTE ST 336. These types may be used in a range of applications such as... | |
| This standard describes design criteria, performance requirements, and performance tests for portable exposure rate meters. The PDF of this standard is available in the IEEE GET program. "IEEE Get Program"... | |
| This standard describes the camera run length, perforation cutout notch, and end-of-run notch of film supplied in 8-mm type S model 1 motion-picture film camera cartridges of 15-m and 60-m... | |
| This standard describes the total length and the photographically useful length of raw film supplied on an 8-mm type R motion-picture camera spool of 25-ft (7.6-m) nominal capacity. | |
| This standard is intended to cover procedures for compliance testing of a wide variety of transmitters designed to operate in licensed radio services, including but not limited to:Commercial Mobile Radio... | |
| This standard is intended to cover procedures for testing the compliance of a wide variety of unlicensed wireless devices (also called unlicensed intentional radiators) including but not limited to: remote... | |
| This standard provides an evaluation process and supporting test methods to quantify the ability of a wireless device to coexist with other wireless services in its intended radio frequency (RF)... | |
| This standard provides recommendations to protect personnel in military environments against established adverse health effects associated with exposure to electric, magnetic, and electromagnetic fields, induced and contact current, and contact... | |
| This standard provides recommended test methods and limits for assuring the RF immunity of office equipment to general use transmitters with transmitter power up to 8 watts. | |
| This Standard specifies a mechanism for the mapping of ANSI/SCTE 104 messages (with a maximum size of 2000 bytes) into 10-bit vertical ancillary data space. It is equally applicable to... | |
| This Standard specifies a time and control code for use in television and accompanying audio systems operating at nominal rates of 60, 59.94, 50, 30, 29.97, 25, 24, and 23.98... | |
| This Standard specifies a time and control code for use in television and accompanying audio systems operating at nominal rates1 of 60, 59.94, 50, 48, 47.95, 30, 29.97, 25, 24,... | |
| This standard specifies an audio frequency test tape to be used for adjusting the sensitivity and frequency response of audio 1 record (program audio track) and audio 2 record (cue... | |
| This standard specifies methods for the validation of test sites used for radiated emission measurements in the frequency range of 1 GHz to 18 GHz. | |
| This standard specifies the basic system parameters, i.e., the positions of recording head gaps, the scanning configuration, the axis of rotation of the video head wheel, and the appropriate tape... | |
| This standard specifies the compressed data format and decoding process for VC-3 compressed video data. VC-3 supports high definition YCbCr video data in both 8-bit and 10-bit sampling depths for... | |
| This standard specifies the compressed data format and decoding process for VC-3 compressed video data. VC-3 supports video up to 16384 × 16384 raster resolutions as YCBCR(A) (4:4:4(:4), 4:2:2(:4), 4:2:0(:4))... | |
| This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with 8-mm type S perforations in positions 1 and 3 and a perforation pitch of either 0.1664 in... | |
| This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with 8-mm type S perforations in positions 1 and 4 and a perforation pitch of either 0.1664 in... | |
| This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with perforations along one or both edges and a perforation pitch of either 0.2994 in or 0.3000 in... | |
| This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with 16-mm perforations in positions 1-3-0 and a perforation pitch of either 0.2994 in or 0.3000 in (7.605... | |
| This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a CS-type perforation and a perforation pitch of 0.1870 in (4.750 mm). | |
| This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a KS-type perforation and a perforation pitch of either 0.1866 in or 0.1870 in (4.740 mm or... | |
| This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with four rows of 8-mm type S perforations and one row of special perforations having a perforation pitch... | |
| This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with one row of 8-mm type S perforations and one row of special perforations having a perforation pitch... | |
| This standard specifies the cutting and perforating dimensions for 65-mm motion-picture film with a KS-type perforation and a perforation pitch of either 0.1866 in or 0.1870 in (4.740 mm or... | |
| This standard specifies the cutting and perforating dimensions for 70-mm motion-picture film perforated 65-mm, with a KS-type perforation and a perforation pitch of 0.1870 in (4.750 mm). | |
| This standard specifies the cutting and perforating dimensions for 8-mm motion-picture film with 8-mm type S perforations along one edge and a perforation pitch of either 0.1664 in or 0.1667... | |
| This standard specifies the dimensions and characteristics necessary for the appropriate flatness of the cartridge pressure pads as well as the required clearances for the film in the aperture area... | |
| This standard specifies the dimensions and location of recorded video, audio, and tracking-control records for 1-in type C helical-scan television analog recorders operating in the 525/60 monochrome or NTSC color... | |
| This standard specifies the dimensions and location of the cartridge aperture and pressure pad as well as the position of the film in the aperture of 8-mm type S 50-ft... | |
| This standard specifies the dimensions and location of the cartridge aperture, pressure pad, and characteristics essential to the appropriate flatness of the cartridge pressure pad. Also specified are the position... | |
| This standard specifies the dimensions and location of the video, audio, and tracking-control records and the longitudinal separation of the simultaneously recorded information of the video and audio records, as... | |
| This standard specifies the dimensions for the width, thickness, and curvature of 2-in video magnetic recording tape. | |
| This standard specifies the dimensions of 8-mm type S motion-picture projection reels of 100- to 312-mm (3.94- to 12.28-in) diameter with nominal film capacities up to 360 m (1200 ft). | |
| This standard specifies the dimensions of shipping reels for 35-mm motion-picture prints having a nominal film capacity of 2000 ft (610 m). The use of 1000-ft capacity shipping reels is... | |
| This standard specifies the dimensions of that part of the film image area used for review room viewing of 35-and 16-mm motion-picture prints intended for television transmission, and the placement... | |
| This standard specifies the dimensions of the 8-mm type S 50-ft model 1 sound motion-picture film camera cartridge and cartridge-camera interface. Also specified are the dimensions of the take-up core... | |
| This standard specifies the dimensions of the 8-mm type S motion-picture film camera cartridge and cartridge-camera interface. Also specified are the dimensions of the take-up core drive opening and critical... | |
| This standard specifies the frequency response and operating level of recorders and reproducers for audio records for 1-in type B helical-scan video tape recording. | |
| This standard specifies the frequency response and reference level of recorders and reproducers for audio and longitudinal time and control code records for 1-in type C helical-scan television analog recording. | |
| This standard specifies the general video record system, video pole tip locations, scanner parameters, scanner-guide locations, tape tension, and test conditions for 1-in type C helical-scan television analog recorders operating... | |
| This standard specifies the information to be included by the manufacturer covering the physical specifications and certain packaging characteristics of motion-picture raw stock. The suggested location of this information on... | |
| This standard specifies the location and dimensions of recording stripes and balance stripes applied to 16-mm motion-picture film with two rows of 8-mm type S perforations in positions 1 and... | |
| This standard specifies the location and dimensions of the magnetic recording stripe and the balance stripe applied to 8-mm motion-picture film with one row of 8-mm type S perforations. | |
| This standard specifies the location and dimensions of the magnetic recording stripes and the balance stripes applied to 16-mm motion-picture film with two rows of 8-mm type S perforations in... | |
| This standard specifies the location and dimensions of the magnetic recording stripes and the balance stripes applied to 35-mm motion-picture film with four rows of 8-mm type S perforations and... | |
| This standard specifies the location and dimensions of the magnetic recording stripes on 35-mm motion-picture film used for four-track magnetic audio release prints having an anamorphic-type picture image. | |
| This standard specifies the location and dimensions of the magnetic striping material applied to 16-mm motion-picture film with perforations along both edges to be used for both picture and audio. | |
| This standard specifies the location and dimensions of the magnetic striping material applied to 16-mm motion-picture prints, containing a picture and photographic audio record, for the purpose of employing both... | |
| This standard specifies the location and size of the 8-mm type S printed picture areas for negative and intermediate optical reduction printing on 35-mm motion-picture film perforated 2R-1664 in row... | |
| This standard specifies the location and size of the 8-mm type S printed picture areas for negative/positive and reversal printing on 16-mm motion-picture film perforated 8-mm type S, 2R-1667 and... | |
| This standard specifies the location and size of the printed picture area for negative/positive and reversal printing operations on 16-mm motion-picture film perforated 8-mm type S, 2R-1664 or 2R-1667, in... | |
| This standard specifies the mapping of VC-3 Coding Units as a Picture Element that can be used in the Picture Item of the MXF GC. The Picture Element can contain... | |
| This standard specifies the mapping of VC-3 Coding Units as a Picture Element that may be used in the Picture Item of the MXF GC. The Picture Element may contain... | |
| This standard specifies the maximum dimensions of the film image area intended for projection from a 70-mm motion-picture film, and the placement of this area relative to the perforations and... | |
| This standard specifies the position of the emulsion for 35-mm motion-picture release prints having four perforations per frame and the position of the magnetic striping relative to the projector lens. | |
| This standard specifies the recorded characteristic of magnetic audio records on 70-mm striped motion-picture release prints, when reproduced at 120 perforations per second (approximately 112 ft [34 m] per minute... | |
| This standard specifies the screen luminance level, luminance distribution, and spectral distribution (color temperature) of the projection light for theatrical, review-room, and non-theatrical presentation of 16-, 35-, and 70-mm motion-picture... | |
| This standard specifies time code formats with the frame counts 72, 96, 100 and 120 and the frame count 120 with drop-frame compensation. This standard also specifies a transmission format... | |
| This standard supplements ISO 5–2 and ISO 5–3 by specifying spectral conditions suitable for determining the sensitometric characteristics of photographic audio records on three-component subtractive color films having records made... | |
| To facilitate interchange, this specification defines specific text and binary representations for digital object identifier (DOI) names and Entertainment ID Registry (EIDR) Identifiers. It also defines dictionary entries, e.g. types... | |
| Training requirements for the radiological/nuclear detection mission. | |
| U.S. consensus standard methods are specified in this amendment for validating standard test sites and alternative test sites used for measurement of radiated radio-frequency (RF) signals and noise emitted from... | |
| U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz... | |
| Vehicle electrification is envisioned to be a significant component of the forthcoming Smart Grid. In this document, a Smart Grid vision of electric vehicle technology for the next 30 years... |
| << Prev | Next >> |