Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
760
770
780
790
800
810
812
813
814
815
816
817
818
819
820
821
822
823
824
830
840
850
860
870
880
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| APPLICATION OF SERIES T RECOMMENDATIONS | |
| Arrangement of Channels in Multi-Channel Single-Sideband and Independent-Sideband Transmitters for Long-Range Circuits Operating at Frequencies Below About 30 MHz - Section 3Aa - Technical Characteristics | |
| ARRANGEMENT OF CHANNELS IN MULTI-CHANNEL SINGLE-SIDEBAND AND INDEPENDENT-SIDEBAND TRANSMITTERS FOR LONG-RANGE CIRCUITS OPERATING AT FREQUENCIES BELOW ABOUT 30 MHz | |
| AUTOMATIC ERROR-CORRECTING SYSTEM FOR TELEGRAPH SIGNALS TRANSMITTED OVER RADIO CIRCUITS | |
| Bandwidth Required at the Output of a Telegraph or Telephone Receiver - Section 3Aa - Technical Characteristics | |
| BANDWIDTH REQUIRED AT THE OUTPUT OF A TELEGRAPH OR TELEPHONE RECEIVER | |
| Bandwidths, signal-to-noise ratios and fading allowances in complete systems | |
| Bandwidths, signal-to-noise ratios and fading allowances in HF fixed and land mobile radiocommunication systems | |
| BERYLLIA CERAMICS FOR ELECTRONIC AND ELECTRICAL APPLICATIONS | |
| CLASSIFICATION OF MULTI-CHANNEL RADIOTELEGRAPH SYSTEMS FOR LONG-RANGE CIRCUITS OPERATING AT FREQUENCIES BELOW ABOUT 30 MHz AND THE DESIGNATION OF THE CHANNELS IN THESE SYSTEMS | |
| Frequency stability required for systems operating in the HF fixed service to make the use of automatic frequency control superfluous | |
| GENERAL PRINCIPLES ON THE PRESENTATION OF TERMINAL IDENTIFICATION TO USERS OF THE TELEMATIC SERVICES | |
| Guide for Additive manufacturing \x96 Installation/Operati on and Performance Qualification (IQ/OQ/PQ) of Laser-Beam Powder Bed Fusion Equipment for Production Manufacturing | |
| Guide for Additive Manufacturing \x97 Design \x97 Directed Energy Deposition | |
| Guide for Additive Manufacturing \x97 Design \x97 Material Extrusion of Polymers | |
| Practice for Identification of Minute Crystalline Particle Contaminants by X-Ray Diffraction | |
| PROVISION OF TELEMATIC AND DATA TRANSMISSION SERVICES ON INTEGRATED SERVICES DIGITAL NETWORK (ISDN) | |
| Provisions Applying to the Operation of an International Public Automatic Message Switching Service for Equipments Utilizing the International Telegraph Alphabet No. 2 - Telegraph and Mobile Services Operations and Quality... | |
| PROVISIONS APPLYING TO THE OPERATION OF AN INTERNATIONAL PUBLIC AUTOMATIC MESSAGE SWITCHING SERVICE FOR EQUIPMENTS UTILIZING THE INTERNATIONAL TELEGRAPH ALPHABET No. 2 | |
| Recommended Practice for Dimensions and Tolerances for Bone Plates | |
| Recommended Practice for Electrostatic Charge Mobility on Flexible Barrier Materials | |
| Specification for Slotted Bone Plates | |
| Specification for Tipial Type Bone Plate | |
| Standard Classification for Descriptions of Spaceport Capabilities | |
| Standard Classification for Space Launch and Reentry Vehicles | |
| Standard Consumer Safety Performance Specification for Motorized Partitions | |
| Standard Consumer Safety Specification for Child Safety Locks and Latches for Use with Cabinet Doors and Drawers | |
| Standard Consumer Safety Specification for Infant Bathers - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Consumer Safety Specification for Infant Bathers | |
| Standard Consumer Safety Specification for Nursing Pillows | |
| STANDARD DEFINITIONS OF TERMS RELATING TO ELECTROSTATIC COPYING (R 1986) | |
| Standard Guidance for Space Data Exchange to Support Integration of Space Operations into Air Traffic Management | |
| Standard Guide for A-UGV Capabilities | |
| Standard Guide for Active Fixation Durability of Endovascular Prostheses | |
| Standard Guide for Additive Manufacturing \x96 Feedstock \x96 Particle Shape Image Analysis by Optical Photography to Identify and Quantify the Agglomerates/Satelli tes in Metal Powder Feedstock | |
| Standard Guide for Additive Manufacturing \x97 Design \x97 Decision Support | |
| Standard Guide for Additive Manufacturing \x97 Design \x97 Post-Processing for Metal PBF-LB | |
| Standard Guide for Additive Manufacturing \x97 Feedstock Materials \x97 Testing Moisture Content in Powder Feedstock | |
| Standard Guide for Additive Manufacturing \x97 Test Artifacts \x97 Accelerated Build Quality Assurance for Laser Beam Powder Bed Fusion (PBF-LB) | |
| Standard Guide for Additive Manufacturing of Metal \x97 Finished Part Properties \x97 Methods for Relative Density Measurement | |
| Standard Guide for Additive Manufacturing of Metals \x96 Feedstock Materials \x96 Metal Powder Feedstock Characterization Data for the Purpose of Comparative Quality Evaluation | |
| Standard Guide for Additive Manufacturing of Metals \x96 Powder Bed Fusion \x96 Guidelines for Feedstock Re-use and Sampling Strategies | |
| Standard Guide for Additive Manufacturing of Metals \x96 Powder Bed Fusion \x96 Measurement and Characterization of Surface Texture | |
| Standard Guide for Additive Manufacturing of Metals \x97 Data \x97 File Structure for In-Process Monitoring of Powder Bed Fusion (PBF) | |
| Standard Guide for Additive Manufacturing of Metals \x97 Feedstock Materials \x97 Assessment of Powder Spreadability | |
| Standard Guide for Additive Manufacturing of Polymers \x97 Material Extrusion \x97 Recommendation for Material Handling and Evaluation of Static Mechanical Properties | |
| Standard Guide for Aerospace/Aviation Powerplant Personnel Certification | |
| Standard Guide for Aircraft Certification Education Standards for Engineers and Professionals in Aerospace Industry | |
| Standard Guide for Aircraft Electronics Installation Technician Certification | |
| Standard Guide for Aircraft Instrument Systems Technician Certification | |
| Standard Guide for Airframe and Systems Aviation Maintenance Personnel | |
| Standard Guide for Assessing Fit Accommodation of Exoskeletons for Manufacturers and Designers | |
| Standard Guide for Assessing Risks Related to Implementation of Exoskeletons in Task-Specific Environments - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Assessing Risks Related to Implementation of Exoskeletons in Task-Specific Environments | |
| STANDARD GUIDE FOR ASSESSING THE COMPATIBILITY OF A CLEANING BRUSH PART WITH DIFFERENT SUBSTRATES USED IN THE CONSTRUCTION OF MEDICAL DEVICES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Assessing the Compatibility of a Cleaning Brush Part with Different Substrates Used in the Construction of Medical Devices | |
| Standard Guide for Assessing the Service Life of a Brush Part Intended to Clean a Medical Device | |
| Standard Guide for Assessing the Skeletal Myoblast Phenotype | |
| Standard Guide for ASTM F24 Standards Governing Lifecycle Management of Amusement Rides and Devices - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for ASTM F24 Standards Governing Lifecycle Management of Amusement Rides and Devices | |
| Standard Guide for Automatic Flight Control System Technician | |
| Standard Guide for Bioinks Used in Bioprinting | |
| Standard Guide for Cell Potency Assays for Cell Therapy and Tissue Engineered Products | |
| Standard Guide for Chain-Link Pickleball Court Fences - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Chain-Link Pickleball Court Fences | |
| Standard Guide for Characterization and Assessment of Heart Valve Tissue Engineered Medical Products (TEMPs) | |
| Standard Guide for Characterization and Testing of Porcine Fibrinogen as a Starting Material for Use in Biomedical and Tissue-Engineered Medical Product Applications | |
| Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products | |
| Standard Guide for Classifying Alterations for In-Service Aircraft under FAA Authority Oversight | |
| Standard Guide for Classifying Safety-Related Events | |
| Standard Guide for Clinical Outcomes for Clinical Trials and/or Clinical Registries for Hip Reconstructive Surgery | |
| Standard Guide for Collecting Skimmer Performance Data in Ice Conditions | |
| Standard Guide for Continuity of Maritime Operations During the Onset of a Pandemic | |
| Standard Guide for Core Competencies for Aviation Maintenance Personnel | |
| Standard Guide for Crewed Suborbital Space Vehicle Design - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Crewed Suborbital Space Vehicle Design | |
| Standard Guide for Designing Reusable Medical Devices for Cleanability | |
| Standard Guide for Detection and Quantification of Cleaning Markers (Analytes) for the Validation of Cleaning Methods for Reusable Medical Devices - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Detection and Quantification of Cleaning Markers (Analytes) for the Validation of Cleaning Methods for Reusable Medical Devices | |
| Standard Guide for Ensuring the Safety of Connected Consumer Products - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Ensuring the Safety of Connected Consumer Products | |
| Standard Guide for Establishing a Reporting Structure for Exoskeleton Analysis | |
| Standard Guide for Evaluating Extracellular Matrix Decellularization Processes | |
| Standard Guide for Flight Hazard and Surveillance Systems Personnel Certification | |
| Standard Guide for Foreign Object Elimination (FOE) Elements of Basic Awareness and Personnel Certification | |
| Standard Guide for Hazards for Consideration when Designing Exoskeletons | |
| Standard Guide for In-Service Care of Temporary Insulating Plastic Guard (Cover-Up) Equipment for Protection of Workers | |
| Standard Guide for In-Situ Pipeline Re-Construction As Coupled Dual-Wall Composite Pipeline by Push/Pull Installation of Compressed-Fit Shape-Memory-Polymer Tubular (SMPT) | |
| STANDARD GUIDE FOR IN-SITU PIPELINE RENOVATION AS DUAL-WALL COMPOSITE PIPELINE BY PUSH/PULL INSTALLATION OF COMPRESSED-FIT SHAPE-MEMORY-POLYMER TUBULAR (SMPT) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for In-Situ Pipeline Renovation As Dual-Wall Composite Pipeline by Push/Pull Installation of Compressed-Fit ShapeMemory-Polymer Tubular (SMPT) | |
| Standard Guide for Inclusion of Cyber Risks into Maritime Safety Management Systems in Accordance with IMO Resolution MSC.428(98)\x97Cyber Risks and Challenges | |
| Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe | |
| Standard Guide for Maintenance of Marine Sanitation Devices (MSDs) and the Effects of Cleaning Agents on MSD Operations | |
| Standard Guide for Measurement of pH Below Resilient Flooring Installations | |
| Standard Guide for Measurement of pH Involving Resilient Flooring Installations - INCLUDES STANDARDS + REDLINE (PDF) | |
| Standard Guide for Measuring the Adhesion of Crude Oils and Fuel Oils | |
| Standard Guide for Medical Qualifications for Suborbital Vehicle Passengers | |
| Standard Guide for Model Development for Particulate Generation Testing of Endovascular Devices | |
| Standard Guide for Occupant Survivability in Orbital Vehicles | |
| Standard Guide for Onboard Communication & Safety Systems Personnel Certification | |
| Standard Guide for Powder Reuse Schema in Powder Bed Fusion Processes for Medical Applications for Additive Manufacturing Feedstock Materials | |
| Standard Guide for Pre-clinical Testing of Materials Used to Regenerate Muscle Following Volumetric Muscle Loss Injuries | |
| Standard Guide for Premises Design Considering Snow and Ice Management for the Reduction of Pedestrian Slips - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Premises Design Considering Snow and Ice Management for the Reduction of Pedestrian Slips | |
| Standard Guide for Preparing Weathered Samples of Oil Using a Rotary Evaporator | |
| Standard Guide for Quantitative Measures for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics | |
| Standard Guide for Respirator Fit Testing Methods | |
| Standard Guide for Set of Objects used with A-UGVs | |
| Standard Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries | |
| Standard Guide for Storage, Use, and Handling of Liquid Rocket Propellants | |
| Standard Guide for Temporary Fence Applications for Construction Sites | |
| Standard Guide for Testing Interpreting Performance | |
| Standard Guide for Training and Qualification of Safety-Critical Space Operations Personnel | |
| Standard Guide for Training for Public Safety Remote Pilot of Unmanned Aircraft Systems (UAS) Endorsement | |
| Standard Guide for Unmanned Aircraft System (UAS) Maintenance Technician Qualification | |
| Standard Guide for Use of Herding Agents in Conjunction with In-Situ Burning | |
| Standard Guide for Using Fourier Transform Infrared Spectrometry to Evaluate Synthetic Equine Surface Components | |
| STANDARD METHOD FOR CORROSION TESTING OF GASKETS (R 1985) | |
| Standard Performance Specifications and Test Methods for Walk-Through Metal Detectors Used in Safety and Security | |
| Standard Practice for Additive Manufacturing \x96 General Principles \x96 Part Classifications for Additive Manufactured Parts Used in Aviation | |
| Standard Practice for Additive Manufacturing \x96 Part Grades for Automotive | |
| Standard Practice for Additive Manufacturing \x97 General Principles \x97 Overview of Data Pedigree | |
| Standard Practice for Additive Manufacturing \x97 Powder Bed Fusion \x97 Condition Defined Maintenance for Optical Systems | |
| Standard Practice for Aeroplane Turbine Fuel System Hot Weather Operations | |
| Standard Practice for Aircraft Simplified Loads Criteria - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Aircraft Simplified Loads Criteria | |
| Standard Practice for Alerting Methods in Aircraft - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Alerting Methods in Aircraft | |
| STANDARD PRACTICE FOR ASSESSMENT OF COMPATIBILITY OF METALLIC MATERIALS FOR SURGICAL IMPLANTS WITH RESPECT TO EFFECT OF MATERIALS ON TISSUE | |
| Standard Practice for Blast Testing | |
| Standard Practice for Butt Fusion Joining of PA12 Pipe and Fittings | |
| Standard Practice for Butt-Fusion Joining of Crosslinkable Polyethylene (CX-PE) Pipe and Tubing | |
| Standard Practice for Cleaning of Thermoplastic Solid Wall Sanitary Sewer Pipelines | |
| Standard Practice for Close Tolerance Pipe Slurrification (CTPS) Method to Replace, Rehabilitate, and Repair Existing Buried Asbestos Cement (AC) Pipe Systems | |
| STANDARD PRACTICE FOR COMPLIANCE AUDITS TO ASTM STANDARDS ON UNMANNED AIRCRAFT SYSTEMS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems | |
| STANDARD PRACTICE FOR CONFORMITY ASSESSMENT OF METAL DETECTORS USED IN SAFETY AND SECURITY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Conformity Assessment of Metal Detectors Used in Safety and Security | |
| Standard Practice for Considering and Deploying Exoskeletons for Return to Work | |
| STANDARD PRACTICE FOR CONSTRUCTION OF TEST CELL FOR LIQUID EXTRACTION OF FLEXIBLE BARRIER MATERIALS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials | |
| Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures | |
| Standard Practice for Describing Stationary Obstacles Utilized within A-UGV Test Methods | |
| STANDARD PRACTICE FOR DESIGN AND CONSTRUCTION OF NONMETALLIC ENVELOPED GASKETS FOR CORROSIVE SERVICE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR DESIGN AND CONSTRUCTION OF NONMETALLIC ENVELOPED GASKETS FOR CORROSIVE SERVICE | |
| Standard Practice for Determining Allowable Tensile Load for Polyamide-12 (PA12) Gas Pipe During Pull-In Installation | |
| Standard Practice for Determining Safe-Life, Inspection Threshold and Recurring Inspection Intervals | |
| Standard Practice for Determining Solderability of Thick Film Conductors | |
| Standard Practice for Developing Simplified Fatigue Load Spectra | |
| Standard Practice for Development of a Durability and Reliability Flight Demonstration Program for Low-Risk Unmanned Aircraft Systems (UAS) under FAA Oversight | |
| Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods | |
| Standard Practice for Electrofusion Joining Polyethylene (PE) Pipe and Fittings for Pressure Pipe Service | |
| Standard Practice for Enhanced Indication Methods in Aircraft - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Enhanced Indication Methods in Aircraft | |
| Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics | |
| Standard Practice for Establishing the Minimum- and Maximum-Width Configurations for Crash Testing of Exceptionally Long Variable-Width Vehicle Barriers | |
| STANDARD PRACTICE FOR EXOSKELETON WEARING, CARE, AND MAINTENANCE INSTRUCTIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Exoskeleton Wearing, Care, and Maintenance Instructions | |
| Standard Practice for Field Leak Testing of Polyamide-12 (PA12) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing) | |
| Standard Practice for Field Measurements of Snow Sport Freestyle Terrain Jumps | |
| Standard Practice for Image Evaluation of Electrostatic Business Copies | |
| STANDARD PRACTICE FOR INDEPENDENT AUDIT PROGRAM FOR UNMANNED AIRCRAFT OPERATORS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Independent Audit Program for Unmanned Aircraft Operators | |
| STANDARD PRACTICE FOR LABELING AND INFORMATION FOR EXOSKELETONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Labeling and Information for Exoskeletons | |
| Standard Practice for Load Handling When Using an Exoskeleton | |
| Standard Practice for Lower Extremity Exoskeleton Locomotion Transitions | |
| Standard Practice for Measuring Dynamic Characteristics of Water Slide Systems Using Instrumented Humans | |
| Standard Practice for Movement Tests When Using an Exoskeleton | |
| Standard Practice for Pilot Compartment View in Precipitation | |
| STANDARD PRACTICE FOR POWERPLANT INSTRUMENTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Powerplant Instruments | |
| Standard Practice for Protection of Aircraft Systems from Intentional Unauthorized Electronic Interactions - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Protection of Aircraft Systems from Intentional Unauthorized Electronic Interactions | |
| Standard Practice for Quantifying Cell Proliferation in 3D Scaffolds by a Nondestructive Method | |
| Standard Practice for Recording the Exoskeleton Fit to the User | |
| Standard Practice for Recording the Exoskeleton Test Configuration | |
| Standard Practice for Recording the Exoskeleton User Information | |
| Standard Practice for Remote ID Means of Compliance to Federal Aviation Administration Regulation 14 CFR Part 89 | |
| Standard Practice for Respiratory Protection - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Respiratory Protection | |
| Standard Practice for Respiratory Protection\x97Respir ator Use\x97Physical Qualifications for Personnel | |
| Standard Practice for Sectional Repair of Existing Gravity Flow, Non-Pressure Pipelines and Conduits by Pushed or Pulled-In-Place Installation of Cured-In-Place Thermosetting Resin Pipe (CIPP) | |
| Standard Practice for Simplified Aircraft Loads Determination | |
| Standard Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft | |
| Standard Practice for Single Component, Fluid-Applied Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings | |
| Standard Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (N2O4) | |
| Standard Practice for Structural Compliance of Very Light Aeroplanes | |
| Standard Practice for Structural Finite Element Model Verification and Validation | |
| Standard Practice for Training Exoskeleton Users | |
| Standard Practice for Validating the Additive Manufacturing (AM) Production Process for Medical Devices Produced Using Laser Powder Bed Fusion | |
| Standard Specification Fabricated Fittings of Crosslinkable Polyethylene (CX-PE) | |
| Standard Specification for 225/45R17 94H XL Radial Standard Reference Test Tire - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for 225/45R17 94H XL Radial Standard Reference Test Tire | |
| Standard Specification for 225/45R17 94V XL Radial Standard Reference Test Tire - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for 225/45R17 94V XL Radial Standard Reference Test Tire | |
| Standard Specification for 3 through 24 in. Lined Flexible Corrugated Polyethylene Pipe for Land Drainage Applications | |
| Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire SW | |
| Standard Specification for Additive Manufacturing \x96 Data \x96 Common Exchange Format for Particle Size Analysis by Light Scattering | |
| Standard Specification for Additive Manufacturing \x96 Finished Part Properties \x96 Grade 4340 (UNS G43400) via Laser Beam Powder Bed Fusion for Transportation Applications | |
| Standard Specification for Additive Manufacturing \x96 Finished Part Properties \x96 Maraging Steel via Powder Bed Fusion | |
| Standard Specification for Additive Manufacturing \x96 Finished Part Properties \x96 Standard Specification for Niobium-Hafnium Alloy UNS R04295 via Laser Beam Powder Bed Fusion for Spaceflight Applications | |
| Standard Specification for Aeroelasticity Requirements for a Light Sport Airplane | |
| STANDARD SPECIFICATION FOR AIRCRAFT EMERGENCY PARACHUTE RECOVERY SYSTEMS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Aircraft Emergency Parachute Recovery Systems | |
| Standard Specification for Barrier Face Coverings - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Barrier Face Coverings | |
| STANDARD SPECIFICATION FOR CANNULATED HEX-HEAD BOLTS (MCLAUGHLIN TYPE) MADE FROM COBALT-CHROMIUM ALLOY | |
| STANDARD SPECIFICATION FOR CANNULATED HEX-HEAD BOLTS (THORNTON TYPE) MADE FROM COLBALT-CHROMIUM ALLOY | |
| Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers | |
| Standard Specification for Cloverleaf Intramedullary Pins | |
| Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and Security | |
| STANDARD SPECIFICATION FOR COUNTERBORED HEX-HEAD BOLTS (MCLAUGHLIN TYPE) MADE FROM STAINLESS STEEL | |
| STANDARD SPECIFICATION FOR COUNTERBORED HEX-HEAD BOLTS (THORNTON TYPE) MADE FROM STAINLESS STEEL | |
| Standard Specification for Counterlocking Screws (McLaughlin Type) (Discontinued - 1993) | |
| STANDARD SPECIFICATION FOR COUNTERLOCKING SCREWS (THORNTON TYPE) | |
| Standard Specification for Crosslinkable Polyethylene (CX-PE) Pipe | |
| Standard Specification for Design and Construction of Large Fixed Wing Unmanned Aircraft Systems | |
| Standard Specification for Detect and Avoid System Performance Requirements - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Detect and Avoid System Performance Requirements | |
| Standard Specification for Determining Flammability of Materials for Recreational Camping Tents and Warning Labels for Associated Hazards - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Determining Flammability of Materials for Recreational Camping Tents and Warning Labels for Associated Hazards | |
| STANDARD SPECIFICATION FOR DETONATION FLAME ARRESTERS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Detonation Flame Arresters | |
| Standard Specification for Eye Protectors for Handball | |
| Standard Specification for Face and Ear Protective Devices for Air Soft Sports | |
| Standard Specification for Failure Tolerance for Occupant Safety of Suborbital Vehicles | |
| Standard Specification for Fixation Pins and Wires - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR FIXATION PINS AND WIRES | |
| Standard Specification for Front-Mounted Bicycle Child Carriers (12 kg \x96 27 kg) | |
| Standard Specification for Front-Mounted Bicycle Child Carriers (9 kg \x96 15 kg) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Front-Mounted Bicycle Child Carriers (9 kg \x96 15 kg) | |
| Standard Specification for Fuel Cell Power Systems for Use in Small Unmanned Aircraft Systems (sUAS) | |
| Standard Specification for General Maintenance Manual (GMM) for a small Unmanned Aircraft System (sUAS) | |
| Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions | |
| STANDARD SPECIFICATION FOR HETEROGENEOUS POLYURETHANE SHEET FLOORING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Heterogeneous Polyurethane Sheet Flooring | |
| STANDARD SPECIFICATION FOR HETEROGENEOUS POLYURETHANE TILE OR PLANK FLOORING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Heterogeneous Polyurethane Tile or Plank Flooring | |
| STANDARD SPECIFICATION FOR HEX-HEAD BOLTS (MCLAUGHLIN TYPE) AND LOCK WASHERS, MADE FROM STAINLESS STEEL | |
| STANDARD SPECIFICATION FOR HEX-HEAD BOLTS (MCLAUGHLIN TYPE) MADE FROM COBALT-CHROMIUM ALLOY | |
| STANDARD SPECIFICATION FOR HEX-HEAD BOLTS (THORNTON TYPE) AND LOCK WASHERS MADE FROM STAINLESS STEEL | |
| STANDARD SPECIFICATION FOR HEX-HEAD BOLTS (THORTON TYPE) MADE FROM COBALT-CHROMIUM ALLOY | |
| Standard Specification for Holes and Slots for Inch Cortical Bone Screws | |
| Standard Specification for Installation of Rechargeable Lithium Batteries on Aircraft | |
| Standard Specification for Insulating Live Line Ladders | |
| STANDARD SPECIFICATION FOR ISOLATION GOWNS INTENDED FOR USE IN HEALTHCARE FACILITIES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities | |
| STANDARD SPECIFICATION FOR LOCK WASHERS MADE FROM STAINLESS STEEL | |
| Standard Specification for Marketing, Packaging, and Labeling Adult Magnet Sets Containing Small, Loose, Powerful Magnets (with a Flux Index $50 kG2 mm2) | |
| STANDARD SPECIFICATION FOR METAL PRESS INSERT FITTINGS WITH FACTORY ASSEMBLED STAINLESS STEEL PRESS SLEEVE FOR SDR9 CROSS-LINKED POLYETHYLENE (PEX) TUBING AND SDR9 POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) TUBING | |
| Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing | |
| STANDARD SPECIFICATION FOR MOLYBDENUM FLATTENED WIRE FOR ELECTRON TUBES (R 1991) | |
| Standard Specification for MRS-Rated Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pressure Pipe for Gas Distribution Applications | |
| Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX) Pressure Pipe for Oil and Gas Producing Applications | |
| Standard Specification for Neurosurgical Head Holder Devices - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Neurosurgical Head Holder Devices | |
| Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire | |
| Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing | |
| Standard Specification for Performance for Weather Information Reports, Data Interfaces, and Weather Information Providers (WIPs) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Performance for Weather Information Reports, Data Interfaces, and Weather Information Providers (WIPs) | |
| Standard Specification for Performance of Flame Mitigation Devices Installed in Disposable and Pre-Filled Flammable Liquid Containers - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Performance of Flame Mitigation Devices Installed in Disposable and Pre-Filled Flammable Liquid Containers | |
| Standard Specification for Performance Requirements when Evaluating Slip Resistance of Footwear using ASTM F2913 Whole Shoe Tester - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Performance Requirements when Evaluating Slip Resistance of Footwear using ASTM F2913 Whole Shoe Tester | |
| Standard Specification for Performance Requirements when Evaluating Slip Resistance of Protective (Safety) Footwear using ASTM F2913 Whole Shoe Test Method | |
| Standard Specification for Physical Properties of Polyethylene Corrugated Gravity Flow (non-pressure) Pipe and Fittings with Recycled Content | |
| Standard Specification for Pilot-Type Medical Countersinks | |
| STANDARD SPECIFICATION FOR PLASTIC PRESS INSERT FITTINGS WITH FACTORY ASSEMBLED STAINLESS STEEL PRESS SLEEVE FOR SDR9 CROSS-LINKED POLYETHYLENE (PEX) TUBING AND SDR9 POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) TUBING | |
| Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing | |
| STANDARD SPECIFICATION FOR POLYAMIDE-12 (PA12) LINE PIPE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Polyamide-12 (PA12) Line Pipe | |
| Standard Specification for Polyaromatic Hydrocarbon (PAH) Content in Synthetic Turf Infill | |
| Standard Specification for Polydioxanone Polymer Resins for Surgical Implants | |
| STANDARD SPECIFICATION FOR POLYETHYLENE (PE) ELECTROFUSION FITTINGS FOR OUTSIDE DIAMETER CONTROLLED CROSSLINKED POLYETHYLENE (PEX) PIPE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Polyethylene (PE) Electrofusion Fittings for Outside Diameter Controlled Crosslinked Polyethylene (PEX) Pipe | |
| Standard Specification for Polyethylene of Raised Temperature/Aluminum /Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Polyethylene of Raised Temperature/Aluminum /Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based on Inner Diameter (ID) for use in Air Conditioning and Refrigeration Line Set Systems... | |
| Standard Specification for Polyethylene of Raised Temperature/Aluminum /Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe | |
| Standard Specification for Polyethylene of Raised Temperature/Aluminum /Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe | |
| STANDARD SPECIFICATION FOR POLYOLEFIN PIPE AND FITTINGS FOR DRAINAGE, WASTE, AND VENT APPLICATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications | |
| Standard Specification for Positioning Assurance, Navigation, and Time Synchronization (PNT) for Unmanned Aircraft Systems (UAS) | |
| STANDARD SPECIFICATION FOR REMOTE ID AND TRACKING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Remote ID and Tracking | |
| Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sound Walls | |
| Standard Specification for Selection and Application of Thermal Insulation Systems on Liquefied Natural Gas (LNG) Type C Tanks | |
| Standard Specification for Standard Specification for Polyethylene of Raised Temperature/Aluminum /Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based on Inner Diameter (ID) for use in Air Conditioning and Refrigeration... | |
| Standard Specification for Surveillance Supplementary Data Service Providers | |
| STANDARD SPECIFICATION FOR TRI-FIN NAILS MADE FROM COBALT-CHROMIUM ALLOY | |
| STANDARD SPECIFICATION FOR TRI-FIN NAILS MADE FROM STAINLESS STEEL (R 1977) (E1-1984) | |
| Standard Specification for UAS Traffic Management (UTM) UAS Service Supplier (USS) Interoperability | |
| Standard Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices | |
| Standard Specification for Verification of Lightweight Unmanned Aircraft Systems (UAS) | |
| Standard Specification for Vertiport Design | |
| Standard Specification for Wakeboards\x97Bindin g Mounting Area: Requirements for Locations for Thread Inserts and Thread Size for Non-Track Systems | |
| Standard Specification for Zinc-Flake Coating Systems for Fasteners - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Zinc-Flake Coating Systems for Fasteners | |
| Standard Terminology for Unmanned Aircraft Systems | |
| STANDARD TERMINOLOGY RELATING TO COMMERCIAL SPACEFLIGHT - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Terminology Relating to Commercial Spaceflight | |
| STANDARD TERMINOLOGY RELATING TO ELECTROSTATIC COPYING | |
| Standard Terminology Relating to Hunting Saddles | |
| Standard Terminology Relating to Microphysiological Systems | |
| Standard Terminology Relating to Treestands | |
| Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products | |
| STANDARD TEST METHOD FOR ASSESSING THE SAFETY OF SMALL UNMANNED AIRCRAFT IMPACTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Assessing the Safety of Small Unmanned Aircraft Impacts | |
| Standard Test Method for Assessment of Intra-operative Durability of Intervertebral Body Fusion Devices | |
| Standard Test Method for Bench-Scale Evaluation of Flame-Resistant Clothing Materials for Protection Against Fire Simulations (Cylinder Method) | |
| Standard Test Method for Breaking Strength of Slalom Water Skis | |
| STANDARD TEST METHOD FOR COMPRESSIBILITY AND RECOVERY OF GASKET MATERIALS | |
| Standard Test Method for Confirming the Docking Performance of A-UGVs | |
| Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals | |
| Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator | |
| STANDARD TEST METHOD FOR DETERMINING BENDING YIELD MOMENT OF STAPLES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determining Bending Yield Moment of Staples | |
| Standard Test Method for Determining Ortho-Phthalate Concentration in Flooring Containing Polyvinyl Chloride | |
| STANDARD TEST METHOD FOR DETERMINING THE ERASABILITY OF INKED RIBBONS | |
| Standard Test Method for Evaluating Exoskeleton Fall Risk due to Stumbling | |
| Standard Test Method for Evaluating the Oxidative Resistance of Polypropylene (PP) Piping Systems to Hot Chlorinated Water | |
| Standard Test Method for Evaluating Wind Safety and Durability of Market Umbrellas | |
| Standard Test Method for Exoskeleton Use: Beams | |
| Standard Test Method for Exoskeleton Use: Confined Space: Horizontal Movement | |
| Standard Test Method for Exoskeleton Use: Gait | |
| Standard Test Method for Exoskeleton Use: Gaps | |
| Standard Test Method for Exoskeleton Use: Hurdles | |
| Standard Test Method for Exoskeleton Use: Obstacle Avoidance: Walking | |
| Standard Test Method for Exoskeleton Use: Stairs | |
| Standard Test Method for Filament Bind of Single Fibers in Synthetic Turf - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Filament Bind of Single Fibers in Synthetic Turf | |
| Standard Test Method for Forced-Entry-Resista nce of Fenestration Systems After Simulated Active Shooter Attack + REDLINE (PDF) | |
| Standard Test Method for Forced-Entry-Resista nce of Fenestration Systems After Simulated Active Shooter Attack | |
| Standard Test Method for Full Depth Field Sampling of In-situ Synthetic Turf Infill Materials | |
| Standard Test Method for Gas Chromatography Analysis of Petroleum Waxes Used in Equestrian Synthetic Surfaces | |
| Standard Test Method for Hunting Saddle Static Load Capacity | |
| Standard Test Method for Impact Attenuation of Playing Surface Systems and Materials | |
| Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play | |
| Standard Test Method for In-situ Testing of Functional Properties of Equine Surfaces: Artificial Surfaces | |
| STANDARD TEST METHOD FOR LIQUID EXTRACTION OF FLEXIBLE BARRIER MATERIALS | |
| Standard Test Method for Measurement of Transition Temperatures of Slack Waxes used in Equine Sports Surfaces by Differential Scanning Calorimetry (DSC) | |
| Standard Test Method for Measuring Exoskeleton Cognitive Fit, Perceived Safety, and Acceptance - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Measuring Exoskeleton Cognitive Fit, Perceived Safety, and Acceptance | |
| Standard Test Method for Measuring Heat Transmission Through Flame-Resistant Materials for Clothing in Flame Exposure Using a Cylindrical Specimen Holder | |
| Standard Test Method for Measuring Impact Attenuation Characteristics of Helmets Under Induced Rotational Loading Using an Inclined Anvil | |
| Standard Test Method for Measuring the Cooling Energy Provided by Wicking Liquid Moisture and Evaporating It from Clothing Materials Using a Sweating Hot Plate - INCLUDES STANDARD + REDLINE (PDF)... | |
| Standard Test Method for Measuring the Cooling Energy Provided by Wicking Liquid Moisture and Evaporating It from Clothing Materials Using a Sweating Hot Plate | |
| Standard Test Method for Measuring the Evaporative Resistance of Clothing Items Using Heated Manikin Body Forms | |
| Standard Test Method for Measuring the Thermal Insulation of Clothing Items Using Heated Manikin Body Forms | |
| Standard Test Method for Mineral Characterization of Equine Surface Materials by X-Ray Diffraction (XRD) Techniques | |
| Standard Test Method for Non-Subjective Optical Requirement Testing of Plano Protective Eyewear | |
| Standard Test Method for On-Water Towable Inflatables Testing | |
| Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height | |
| STANDARD TEST METHOD FOR RESPIRATOR FIT CAPABILITY FOR NEGATIVE-PRESSURE HALF-FACEPIECE PARTICULATE RESPIRATORS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators | |
| Standard Test Method for Seam Measurement Procedure for Baseballs and Softballs | |
| STANDARD TEST METHOD FOR SHOCK-ABSORBING PROPERTIES OF PLAYING SURFACE SYSTEMS AND MATERIALS | |
| Standard Test Method for Static Loading of Treestands, Climbing Sticks, and Tripod or Tower Stands - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Static Loading of Treestands, Climbing Sticks, and Tripod or Tower Stands | |
| Standard Test Method for Stent and Endovascular Prosthesis Kink Resistance | |
| Standard Test Method for Testing Fiber Rope Used in Water Sports | |
| Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces | |
| Standard Test Method for Wavelength of Peak Photoluminescence and the Corresponding Composition of Gallium Arsenide Phosphide Wafers | |
| Standard Test Method for Wax Binder Removal from Equestrian Synthetic Track Surfaces | |
| Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components | |
| Standard Test Methods for Metallic Bone Plates Used in Small Bone Fracture Fixation | |
| Standard Test Methods for Sacroiliac Joint Fusion Devices - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Sacroiliac Joint Fusion Devices | |
| TELEGRAPH DISTORTION | |
| USE OF RADIO LINKS IN INTERNATIONAL TELEPHONE CIRCUITS |
| << Prev | Next >> |