Anderson Power Products Datasheets for Wire to Wire Connectors
Wire-to-wire connectors are used to connect two wire-terminated connectors.
Wire to Wire Connectors: Learn more
Page:
1
2
| Product Name | Notes |
|---|---|
| Flexible Conduit Clamp & Hardware Pak for PP15 to PP45 Includes cable clamp, 2 screws, and need amount of retaining pins for each configuration | |
| NULL | |
| PP15-45 Tin plated Power contacts offer a cost effective performance up to 1,500 mating cycles. Contact is an open barrel style for use with wire sizes 14 to 10 K... | |
| PP15-45 Tin plated Power contacts offer a cost effective performance up to 1,500 mating cycles. Contact is an open barrel style for use with wire sizes 20 to 16 (.52... | |
| SB®175 3 Pole Housings & Hardware; Hardware Kit (no contacts included) | |
| SBS®X-75A Sealed Waterproof Connector Series comes with two power contacts , along with up to 6 auxiliaries. Connector accepts power wire sizes from 12 to 4 AWG (2.5 to 25mm2)... | |
| The 6 Pole Mini SPEC Pak® waterproof connectors come in configurations of wire to wire or wire to panel mount offerings with up to a maximum of 50A of power... | |
| The SBS®X-75A sealed waterproof connectors come in multiple configurations offering up to a maximum of 140A of power and the durability of up to 5,000 mating cycles. Positive metal latches... | |
| 3 Position Mini PL SPEC Pak® is a rugged and environmentally sealed (IP68) connector with a manually operated release latch. The 3 Position Mini PL leverages PowerMod® pin and socket... | |
| 5 Pole Mid Power SPEC Pak® is a rugged and environmentally sealed connector for up to 60 amps and 600 volts. A secure & sealed alternative to NEMA and IEC... | |
| 5 Pole Mid Power SPEC Pak® is a rugged and environmentally sealed connector for up to 60A and 600 volts. A secure & sealed alternative to NEMA and IEC three... | |
| 5 Position Mini PL SPEC Pak® is a rugged and environmentally sealed (IP68) connector with a secure manual release latch. This compact connector leverages the proven PowerMod® pin and socket... | |
| A three pole version of the standard SB®175 housing has a two piece housing with springs and hardware. Useful for DC 2 wire plus ground and AC single phase applications. | |
| Air tubes fit into SBE® housings to allow electrolyte circulation while charging the battery. Genderless tube design allows the same part to be used on both sides. (2) Retaining pins... | |
| Air tubes fit into SBE® housings to allow electrolyte circulation while charging the battery. Genderless tube design allows the same part to be used on both sides. (2) Retaining pins... | |
| Anderson Power Products® new line of Power Drawer® series connectors gives our customers more selections than ever to meet their power connector needs. These cost effective, mixed power and signal... | |
| Anderson Power Products® Power Drawer® series connectors gives our customers more selections than ever to meet their power connector needs. These cost effective, mixed power and signal drawer connectors are... | |
| APP® SPEC Pak® Mini 3 position connector is a small, IP68 sealed interconnect solution that provides up to 3 contacts and is UL rated to carry up to 22 amps... | |
| at wiping contacts. The MARC is rated to 29 amps per circuit and can be configured with 8 standard length contacts or 6 standard length and 2 pre mate, multi-purpose... | |
| Bench mount improves ease of use for the operator. Allows the tool to sit horizontally on a bench. | |
| Block locks secure mated Powerpole® 15-45 series housings together. For use in high vibration or shock applications where connectors are unmated infrequently. | |
| Chemical resistant housings feature 2 positions all finger proof. Genderless design mates with itself. Mechanical keys are color coded. The patented SBS® connector family is designed to provide high power... | |
| Crimp barrel O.D. are compliant with DIN standard tooling. Will also fi t into SBX®350 housings. Not recommended for cross mating with above typical contacts for SBE® & SBX® | |
| Gold plated contacts are ideal for signal or low power use with durability up to 5,000 mating cycles. Contacts fit wire between 24 AWG (0.25mm²) to 20 AWG (0.50mm²) Rated... | |
| Ideal for panel to panel, bulkhead to bulkhead, or rack mount applications that require the power connector to compensate for up to 0.45 in. [11.43 mm] of misalignment in either... | |
| Offers a first-mate, last-break connection when stacked together with PP75 housings. Stacks together with PP75 standard and chemical resistant housings. Housings are mechanically keyed to prevent cross mating with power... | |
| Order the number of retaining pins for each receptacle shown in the Snap-in Receptacle Shell ordering information. Pins are also required for the plug side when the Cable Clamp & | |
| Our innovative MARC Connector that offers straight-on or rotational blindmate capability. MARC holds 6 PP15/45 power contacts and 2 PP15/45 premate ground contacts in a high temperature housing. | |
| Polycarbonate housings feature 2 positions all finger proof. Genderless design mates with itself. Mechanical keys are color coded. The patented SBS® connector family is designed to provide high power in... | |
| Powerpole® auxiliary connectors are rated up to 30 amps 600 volts and can be used for auxiliary power, control or sensing. The auxiliary kit includes (1) each black and red... | |
| Powerpole® connectors provide cost-effective reliability, design flexibility and safety for your products' manufacture, installation and maintenance. The housings are modular. They provide 600 Volts continuous, AC or DC operation. Wire... | |
| Powerpole® Pak connector shells enclose stacked groupings of PP15-45 sized housings in a durable black shell for a finished connector appearance and additional features. Inline, panel mount, and blindmate configurations... | |
| Powerpole® pin & socket series connector, designed as ground terminal are for make-first/break-las t connections. The dovetail feature allows you to interlock multiple housings into vertical and horizontal configurations, providing... | |
| PP120 series Powerpole® housings are designed to accommodate up to 1/0 (50 mm²) wires and handle high currents up to 240 amps. Reducing bushings allow PP120 to accept down to... | |
| PP120 Silver Plated Wire Contacts Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. New contacts for #1 to 1/0 AWG (35 to 50 mm²)... | |
| PP15-45 series are the smallest Powerpole® housings. They can be used for wire-to-wire or wire-to-board applications. Wire sizesfrom #20 AWG (0.75 mm²) to #10 (6 mm²) offer power capabilitiesup to... | |
| PP15-45 series are the smallest Powerpole® housings. They can be used for wire-to-wire or wire-to-board applications. Wire sizes from #20 AWG (0.75 mm²) to #10 (6 mm²) offer power capabilities... | |
| PP180 are the largest of the Powerpole® series housings. They are designed to accommodate up to 3/0 (70 mm²) wires and handle high currents up to 350 amps. Busbar contacts... | |
| PP75 series Powerpole® housings can be used for wire-to-wire,wire-to -board, and wire-to-busbar applications. Wire sizesfrom #16 AWG (1.3 mm²) to #6 (13.3 mm²) offer power capabilities up to 120 amps... | |
| Retaining pins are used to keep stacked Powerpole® 75 series housings from separating. Retaining pins are inserted in the circular opening between two housings stacked side by side. Dimension B... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing Kit with snap-in panel mount for 0.8mm panel thickness, 2003G1 contacts, and 12" wire lead. Flush snap-in panel mount design is compatible with crimp... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing Kit with snap-in panel mount for 0.8mm panel thickness, 2003G2 contacts, and 12" wire lead. Flush snap-in panel mount design is compatible with crimp... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing Kit with snap-in panel mount for 1.0mm panel thickness, 2003G1 contacts, and 12" wire lead. Flush snap-in panel mount design is compatible with crimp... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing Kit with snap-in panel mount for 1.0mm panel thickness, 2003G2 contacts, and 12" wire lead. Flush snap-in panel mount design is compatible with crimp... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing Kit with snap-in panel mount for 1.2mm panel thickness, 2003G1 contacts, and 12" wire lead. Flush snap-in panel mount design is compatible with crimp... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing Kit with snap-in panel mount for 1.2mm panel thickness, 2003G2 contacts, and 12" wire lead. Flush snap-in panel mount design is compatible with crimp... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing Kit with snap-in panel mount for 1.6mm panel thickness, 2003G1 contacts, and 12" wire lead. Flush snap-in panel mount design is compatible with crimp... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing Kit with snap-in panel mount for 2.0mm panel thickness, 2003G1 contacts, and 12" wire lead. Flush snap-in panel mount design is compatible with crimp... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing with snap-in panel mount for 0.8mm panel thickness. Flush snap-in panel mount design is compatible with crimp wire contacts. First Mate, Last Break ground... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing with snap-in panel mount for 1.0mm panel thickness. Flush snap-in panel mount design is compatible with crimp wire contacts. First Mate, Last Break ground... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing with snap-in panel mount for 1.2mm panel thickness. Flush snap-in panel mount design is compatible with crimp wire contacts. First Mate, Last Break ground... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing with snap-in panel mount for 1.6mm panel thickness. Flush snap-in panel mount design is compatible with crimp wire contacts. First Mate, Last Break ground... | |
| Saf-D-Grid® 400 Flush Mount Receptacle Housing with snap-in panel mount for 2.0mm panel thickness. Flush snap-in panel mount design is compatible with crimp wire contacts. First Mate, Last Break ground... | |
| Saf-D-Grid® 400 Receptacle Contacts 10 AWG. First Mate, Last Break ground contact provides the safety of an earthing path before engagement of the power contacts. The connectors are rated for... | |
| Saf-D-Grid® 400 Receptacle Contacts 12-18 AWG. First Mate, Last Break ground contact provides the safety of an earthing path before engagement of the power contacts. The connectors are rated for... | |
| Saf-D-Grid® 400 Short Mount Receptacle Housing Kit with snap-in panel mount for 0.8mm panel thickness, 2003G1 contacts, and 12" wire lead. Mid-flange snap-in panel mount design shortens space required inside... | |
| Saf-D-Grid® 400 Short Mount Receptacle Housing Kit with snap-in panel mount for 1.0mm panel thickness, 2003G1 contacts, and 12" wire lead. Mid-flange snap-in panel mount design shortens space required inside... | |
| Saf-D-Grid® 400 Short Mount Receptacle Housing with snap-in panel mount for 0.8mm panel thickness. Mid-flange snap-in panel mount design shortens space required inside the panel. For use with crimp wire... | |
| Saf-D-Grid® 400 Short Mount Receptacle Housing with snap-in panel mount for 1.0mm panel thickness. Mid-flange snap-in panel mount design shortens space required inside the panel. For use with crimp wire... | |
| Saf-D-Grid® 400 Short Mount Receptacle Housing with snap-in panel mount for 1.6mm panel thickness. Mid-flange snap-in panel mount design shortens space required inside the panel. For use with crimp wire... | |
| Saf-D-Grid® 400 Ultra-Short Mount Receptacle Housing with snap-in panel mount for 0.8mm panel thickness with solder contacts. Mid-flange snap in panel mount design for direct solder wire termination uses minimal... | |
| Saf-D-Grid® 400 Ultra-Short Mount Receptacle Housing with snap-in panel mount for 0.8mm panel thickness without contacts. Mid-flange snap in panel mount design for direct solder wire termination uses minimal space... | |
| Saf-D-Grid® 400 Ultra-Short Mount Receptacle Housing with snap-in panel mount for 1.0mm panel thickness with solder contacts. Mid-flange snap in panel mount design for direct solder wire termination uses minimal... | |
| Saf-D-Grid® 400 Ultra-Short Mount Receptacle Housing with snap-in panel mount for 1.2mm panel thickness with solder contacts. Mid-flange snap in panel mount design for direct solder wire termination uses minimal... | |
| Saf-D-Grid® 400 Ultra-Short Mount Receptacle Housing with snap-in panel mount for 1.2mm panel thickness without contacts. Mid-flange snap in panel mount design for direct solder wire termination uses minimal space... | |
| Saf-D-Grid® 400 Ultra-Short Receptacle Contacts for 10-12 AWG wire. First Mate, Last Break ground contact provides the safety of an earthing path before engagement of the power contacts. The connectors... | |
| Saf-D-Grid® 400 Ultra-Short Receptacle Contacts for 14-18 AWG wire. First Mate, Last Break ground contact provides the safety of an earthing path before engagement of the power contacts. The connectors... | |
| SB®175 Sized Connector for 2/0 or 70mm² Wire, SB® 2/0 Housings Genderless design mates with itself. Can be cross mated with gray SB®175 housing, but amperage capability is limited to... | |
| SBS®X-75A Sealed Waterproof Connector Series comes with two power contacts rated up to 135A, along with up to 4 auxiliaries. Connector accepts power wire sizes from 12 to 4 AWG... | |
| SBS®X-75A Sealed Waterproof Connector Series comes with two power contacts rated up to 140A, along with up to 4 auxiliaries. Connector accepts power wire sizes from 12 to 4 AWG... | |
| SBX® and SBE® connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE® connectors feature an IEC 60950 touch safe housing... | |
| SBX® and SBE® connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. Sequencing within auxiliary positions is possible using the 4... | |
| Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. New contacts for 2/0 to 3/0 AWG (70 to 85 mm²) offer extended capability in the... | |
| Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. See reducing bushings in accessory section for smaller wires. | |
| Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. New contacts for 2/0 to 3/0 AWG (70 to 85 mm²) offer extended capability in the... | |
| Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. See reducing bushings in accessory section for smaller wires. * Sold as pairs. 2 parts shipped... | |
| The 5P Mid Power SPEC PAK® is rugged and environmentally sealed connector rated to IP68. Items leverage a Pin and Socket contact technology, offering power handling capabilities up to 60... | |
| The Anderson™ family of Euro Battery Connectors (EBC) are expertly designed for ease of use and incorporate an innovative contact carrier to simplify assembly. The EBC connectors include the industry... | |
| The largest SB® housings work with wire contacts up to 350 mcm [150 mm²] as well as busbar contacts. Genderless design mates with itself. Mechanical keys are color coded. The... | |
| The largest size of SBE®, X, O style housing. SBX® housings are molded from PC. SBE®320 and SBX®350 housings of the same Voltage Color Code cannot be mated. SBX®350 housings... | |
| The middle size of SBE®, X, O style housing. SBE® housings are molded from a chemical resistant PBT. SBX® housings are molded from PC. SBE®160 and SBX®175 housings of the... | |
| The Multi Axial Rotational Connector “MARC” features 8 Powerpole® contacts integrated into a blindmate housing. The connector is designed to blindmate from 2 rotating axis or straight on. The two... | |
| The PM1003GX Inspection tool is used on both the male and female crimp contacts to confirm that the contact is securely latched into the housing. Not for use on PCB... | |
| The PowerMod® connector family offers minimum size and high power. The high performance contacts and insulator are rated for 30 amps continuous. Applications requiring lower operating temperatures can be de-rated... | |
| The Powerpole® “T” Pak connector is a 2 way electrical splitter that splits electrical current from one incoming circuit into two outgoing circuits. The standard configuration is pre-wired for AC... | |
| The PPMX auxiliary connector allows up to 8 auxiliary circuits to be used in the SBE®, SBO®, & SBX® housings. There are 4 auxiliary circuits per PPMX connector and two... | |
| The second to largest Powerpole® housing can be used with wire contacts for up to 1/0 AWG [50mm²] or busbar contacts. PP120 series Powerpole® housings are designed to accommodate up... | |
| The second to largest SB® housings work with wire contacts up to 1/0 AWG [50 mm²] as well as busbar contacts. Genderless design mates with itself. Mechanical keys are color... | |
| The smallest SBS® connector has 2 finger proof positions in a polycarbonate housing with an ergonomic grip. The housing securely holds crimp and poke contacts from the popular Powerpole® 15-45... | |
| The smallest size of SBE®, X, O style housing. SBE®80 and SBO®60 housings of the same Voltage Color Code can be mated but is not recommended as it invalidates UL... | |
| The SPEC Pak® High Power uses rugged and environmentally sealed (IP68) shells to protect APP® Powerpole® contacts and housings. Customer configured SPEC Pak® High Power Connectors are capable of up... | |
| The SPEC Pak® Mid Power is rugged and environmentally sealed (IP68). It leverages APP’s core Powerpole® flat wiping contact technology, offering power handling capabilities up to 80 amps at 600... | |
| The SPEC Pak® Mid Power is rugged and environmentally sealed (IP68). It leverages APP’s core Powerpole® flat wiping contact technology, offering power handling capabilities up to 80 amps at 600... | |
| The unique 1x4 auxiliary connector allows up to 4 auxiliary circuits up to 20 amps 150 volts each in SBE®, SBO®, & SBX® housings. The genderless design holds two each... | |
| The unique 1x4 auxiliary connector allows up to 4 auxiliary circuits up to 20 amps 200 volts each in SBE®, SBO®, & SBX® housings. The genderless design holds two each... | |
| Use two silver plated contacts per housing for the best electrical performance and durability up to 10,000 mating cycles. See reducing bushings in accessory section for smaller wire size | |
| Wires sizes from #10 (5.3 mm²) to 1/0 (50 mm²) ? t in the second to largest connector in the SB® series. The 3 pole SB®175 adds an additional position... | |
| Wires sizes from #10 (5.3 mm²) to 1/0 (50 mm²) fit in the second to largest connector in the SB® series. The 3 pole SB®175 adds an additional position for... | |
| Works with standard lockout - tagout equipment to prevent access to the mating interface of the connector. Made from durable PC plastic. Can be used with 3 pole housing to... | |
| Works with the Battery side to ease mating and unmating connectors. | |
| Works with the Charger / Truck side to ease mating and unmating connectors. |
| Next >> |