ISO – International Organization of Standards Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| A bi-level system for collecting and presenting fire incident data is proposed. One level provides general, broad-gauge data which are relatively limited and collected on all fires. The other level... | |
| Acoustics -- Hearing protectors -- Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs | |
| Aircraft -- Declaration of design and performance for aircraft equipment -- Standard form | |
| Applies to the description of refined nickel as well as of wrought and cast nickel and nickel alloys. The description for nickel alloys shall consist of the chemical symbols of... | |
| Automation systems and integration -- Applications integration approach using information exchange requirements modelling and software capability profiling | |
| Biological evaluation of medical devices -- Guidance on the conduct of biological evaluation within a risk management process | |
| Both terms have been in use for centuries but their meaning seams to have varied from time to time. The present usage has developed in a haphazard manner, such that... | |
| Braking of road vehicles -- Considerations on the definition of mean fully developed deceleration | |
| Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 1: Flash temperature method | |
| Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 2: Integral temperature method | |
| Contains a compilation of major regulations and standards in the field of child restraint systems (CRS) for road vehicles. The aim is to show similarities and differences for specified items. | |
| Contains the rules for applying multimodules for horizontal dimensions in construction which are established in ISO 1040. Is applicable to construction of buildings of all types which are designed in... | |
| Copper, lead and zinc sulfide concentrates -- Step-by-step procedure for the testing of static scales | |
| Deals only with thermal characteristics of building materials and products related to thermal conductivity or thermal resistance. Gives the procedures needed to correct laboratory test values to practical values for... | |
| Deals with terms in common use in computer-assisted publishing (text entry, text editing, typesetting and other typographical imagaging and printing and publishing as far as relevant) and identifies the relationships... | |
| Defines a method for determination of the position of driver hand-controls in vehicles and for verification that the controls lie within the hand-reach envelopes. Applies for checking purposes in road... | |
| Defines in English and French 135 terms of structure, operating conditions, dimensions and geometry of the rollers, surface characteristics of plane and grooved rollers and balance. Alphabetical indices in English... | |
| Defines the essential elements which must be present in a method and also those which shall not be included but which the operator must find in other documents, for example,... | |
| Defines the main dimensions of the concerning parts of rigging screws for stainless steel wire rope, to ensure the compatibility, assembly and interchangeability of the various parts of standing rigging... | |
| Dentistry -- Application of OSI clinical codification to the classification and coding of dental products | |
| Describes a method for evaluating the performance of a monitoring system, the minimum monitoring range behind the machine during rearward movement, the optical and audible signals to the operator. | |
| Describes safety techniques for guarding the dangerous nip points of belt conveyors which occur between the belt and its pulleys or idlers. Supplements the various International Standards dealing with safety... | |
| Describes test methods, information to be gained from the test, and use of subsize test pieces. This second edition cancels and replaces the first edition (1983). Annex A forms an... | |
| Describes the four principles which form the basis of the recommendations given for the design of garments. Gives dimensions and design of sleeves, legs, garment jackets, and fasteners. | |
| Describes the procedures to be used in deriving the calibration curve for methods of measuring the flowrate in closed conduits or open channels, and for assessing the uncertainty associated with... | |
| Describes the work carried out by WG 4. Discusses the role and also the limitations of fire tests in reducing fire danger. The research background is briefly summarized and descriptions... | |
| Determination of uncertainty for volume measurements made using the gravimetric method | |
| Digital coding of oral health and care | |
| Enclosed gear drives for industrial applications | |
| Environmental damage limitation from fire-fighting water run-off | |
| Environmental degradation of textiles used in air cargo restraint equipment | |
| Ergonomics -- Ergonomics of human-system interaction -- Human-centred lifecycle process descriptions | |
| Essential oils -- General rules for labelling and marking of containers | |
| Essential oils -- General rules for packaging, conditioning and storage | |
| Establishes a comparison of regulations on the requirements for devices to be installed into road vehicles and their trailers. May be applied in the lack of detailed specifications. | |
| Establishes a global model monthly mean of temperature, pressure, density and wind. These data can be used as a function of geopotential/geometr ic height. The zone has a latitudinal coverage... | |
| Establishes a system of preference for numbers for use as the numerical factor in multimodular sizes especially for horizontal dimensions in building, and guidance for its use. Is applicable to... | |
| Fire resistance tests -- Guidelines for computational structural fire design | |
| Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 2: Example of a fire zone model | |
| Fire safety engineering -- Part 1: Application of fire performance concepts to design objectives | |
| Fire safety engineering -- Part 2: Design fire scenarios and design fires | |
| Fire safety engineering -- Part 3: Assessment and verification of mathematical fire models | |
| Fire safety engineering -- Part 4: Initiation and development of fire and generation of fire effluents | |
| Fire safety engineering -- Part 5: Movement of fire effluents | |
| Fire safety engineering -- Part 6: Structural response and fire spread beyond the enclosure of origin | |
| Fire safety engineering -- Part 7: Detection, activation and suppression | |
| Fire safety engineering -- Part 8: Life safety -- Occupant behaviour, location and condition | |
| Footwear -- Critical substances potentially present in footwear and footwear components | |
| Fundamentals are outlined which may be used in order to comply with the definitions of ISO 1101. The methods described do not provide for a unique interpretation of the requirements... | |
| Gas cylinders -- International quality conformance system -- Basic rules | |
| Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature | |
| Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity | |
| Geographic information -- Functional standards | |
| Geographic information -- Imagery and gridded data | |
| Gives equations for the calculation of twist factors in SI units and conversion tables with which twist factors expressed in other unit systems can be transformed into SI units. Applicable... | |
| Gives examples of the kinds of hazards associated with screw conveyors at danger points, in particular trapping and shearing points located between the moving screw and the fixed parts of... | |
| Gives examples of the kinds of hazards connected with running belts between idlers and fixed parts of belt conveyors and also between the idlers themselves. Describes different safety devices which... | |
| Gives examples of the various kinds of hazards connected with chain conveyors with supporting rods or rollers, push rods, single load carriers etc., suitable clearances as well as other safety... | |
| Gives guidance on methods of verifying sprocket dimensions specified in ISO 5613. Specifies those dimensions which should be measured to ensure compatibility between chain and sprocket. | |
| Gives instructions relating to the requesting and assignment of the WMI codes and WPMI codes according to ISO 3780 and ISO 4100. | |
| Gives the mathematical derivation of the sampling plan specified in ISO 8634. The tables of values in the annexes A and B are for information only. | |
| Gives the overview of the international standardization of Geometrical Product Specification (GPS). Explains the concept of GPS and provides a Masterplan of GPS including the existing and futural standards. | |
| Gives the rationale for the structural test criteria for ISO series 1 freight containers, based on the tests specified in ISO 1496-1. | |
| Graphic technology -- Statistics of the natural SCID images defined in ISO 12640 | |
| Guidance on structural integrity | |
| Health Informatics -- Clinical document registry federation | |
| Health informatics -- Interoperability and compatibility in messaging and communication standards -- Key characteristics | |
| Health informatics -- Personal health records -- Definition, scope and context | |
| High conductivity copper -- Spiral elongation test | |
| Hydrometry -- Acoustic Doppler profiler -- Method and application for measurement of flow in open channels | |
| Imaging materials - Recommendations for humidity measurement and control | |
| Impact of changes in ISO fluid power particle counting -- Contamination control and filter test standards | |
| Includes recommendations concerning installation of PVC-U-pipes and fittings up to 630 mm diameter, trenchwork, pipe laying and backfilling, maintenance and repair, as well as transport, storage and handling of pipes. | |
| Industrial automation -- Time-critical communications architectures -- User requirements and network management for time-critical communications systems | |
| Industrial automation systems and integration -- Product data representation and exchange -- Part 1027: Application module: Contextual shape positioning | |
| Industrial automation systems and integration -- Product data representation and exchange -- Part 1091: Application module: Maths space | |
| Information and documentation -- Records management -- Part 2: Guidelines | |
| Intelligent transport systems -- Public transport requirements for the use of payment applications for fare media | |
| IS/TR 17671-2 gives guidance for manual, semi-mechanized, mechanized and automatic arc welding of ferritic steels, excluding ferritic stainless steels, in all product forms. Details concerning the possible detrimental phenomena which... | |
| ISO 16218:2013 covers used packaging, although the processes described are not specific for used packaging and can be used for recovery of other materials of same type. Processes for chemical... | |
| ISO 17350:2013 provides guidance on returnable transport items (RTIs), identification codes used for RTIs, specifications for two-dimensional symbols, method for direct marking, and reading method for direct marking. | |
| ISO 17370:2013 specifies a method to establish compatibility among various data carriers such as linear symbols, two-dimensional symbols and RFID, as well as their one-to-one relationship by illustrating the structure... | |
| ISO 20174:2005 provides a Japanese grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR:15608:2000. | |
| ISO 27245:2007 provides a list of International Standards that can be completely or partly applied in the design of tower cranes. A bibliography refers to other useful documents. | |
| ISO 27957:2008 defines the number and the arrangement of temperature measuring points for anthropomorphic test devices (ATDs), in order to ensure that the temperature of the ATD is in accordance... | |
| ISO 9241-100:2010 enables users of standards related to software ergonomics to identify ergonomics standards particularly relevant to software development, gain an overview on the content of software-ergonomics standards, understand the... | |
| ISO TR 13569:2005 provides guidelines on the development of an information security programme for institutions in the financial services industry. It includes discussion of the policies, organization and the structural,... | |
| ISO TR 14799-1:2005 consists of a comparison of the requirements of selected topics as covered by the following world-wide safety standards (excluding local deviations): a) Europe (CEN) -- EN 115; | |
| ISO TR 14799-2:2005 consists of a comparison of the requirements of selected topics as covered by the following world-wide safety standards (excluding local deviations): a) Europe (CEN) -- EN 115; | |
| ISO TR 16880:2004 collects the design and manufacturing requirements and recommendations for bridge and gantry cranes in ISO and IEC International Standards. | |
| ISO TR 17119:2005 provides a common description framework for health informatics standards artefacts. The aim of the health informatics profiling framework (HIPF) is to provide a consistent method for describing... | |
| ISO TR 24532:2006 clarifies the purpose of CORBA and its role in ITS. It provides some broad guidance on usage, and prepares the way for further ISO deliverables on the... | |
| ISO TR 25100:2012 provides guidance on the harmonisation of data concepts that are being managed by data registry and data dictionaries such as those described in ISO 14817:2002. ISO TR... | |
| ISO TR 8550-1:2007 gives general guidance on the selection of an acceptance sampling system, scheme or plan. It does this principally in the context of standards that either already exist... | |
| ISO/TC 178 Lifts, escalators and moving walks | |
| ISO/TC 221 Geosynthetics | |
| ISO/TR 13115:2011 describes the method of three-transducer calibration for calibrating frequency responses of absolute sensitivity by means of a reciprocity technique using three reversible acoustic emission transducers of the same... | |
| ISO/TR 13121:2011 describes a process for identifying, evaluating, addressing, making decisions about, and communicating the potential risks of developing and using manufactured nanomaterials, in order to protect the health and... | |
| ISO/TR 13154:2009 provides general guidelines for the deployment, implementation and operation of a screening thermograph intended to be used for individual non-invasive febrile temperature screening of humans under indoor environmental... | |
| ISO/TR 13184-1:2013 specifies guidance information protocol to provide real-time decision support system to drivers or pedestrians using personal ITS stations: a) Reference architecture for real-time decision support systems This reference... | |
| ISO/TR 13185-1:2012 specifies the communications architecture and generic protocol to provide and maintain ITS services to travellers (including drivers, passengers and pedestrians), using nomadic and portable devices. | |
| ISO/TR 13329:2012 provides guidance on the development of content for, and consistency in, the communication of information on safety, health and environmental matters in safety data sheets (SDS) for substances... | |
| ISO/TR 13330:2013 recommends calculation procedures for several neck performance criteria for low-severity rear impact that are found in the literature. ISO/TR 13330:2013 does not recommend any particular criteria or provide... | |
| ISO/TR 13393:2009 proposes a system for classifying hardfacing microstructures deposited by fusion welding processes. | |
| ISO/TR 13519:2012 provides guidance on the development and use of ISO publications supported by software. The software largely relates to statistical calculations considered by the subcommittees of ISO/TC 69, Application... | |
| ISO/TR 13587:2012 is concerned with three basic statistical approaches for the evaluation and interpretation of measurement uncertainty: the frequentist approach including bootstrap uncertainty intervals, the Bayesian approach, and fiducial inference. | |
| ISO/TR 13624-2:2009 pertains to mobile offshore drilling units that employ a subsea BOP stack deployed at the seafloor. It is intended that the drilling riser analysis methodologies discussed in this... | |
| ISO/TR 14049:2012 provides examples about practices in carrying out a life cycle inventory analysis (LCI) as a means of satisfying certain provisions of ISO 14044:2006. These examples are only a... | |
| ISO/TR 14062:2002 describes concepts and current practices relating to the integration of environmental aspects into product design and development. ISO/TR 14062:2002 is applicable to the development of sector-specific documents. It... | |
| ISO/TR 14069:2013 describes the principles, concepts and methods relating to the quantification and reporting of direct and indirect greenhouse gas (GHG) emissions for an organization. It provides guidance for the... | |
| ISO/TR 14105:2011 defines the cognitive, physical, organizational, and human factors as they apply to usability criteria for electronic document management systems (EDMS) development, selection and implementation. ISO/TR 14105:2011 provides a... | |
| ISO/TR 14121-2:2012 gives practical guidance on conducting risk assessment for machinery in accordance with ISO 12100 and describes various methods and tools for each step in the process. It gives... | |
| ISO/TR 14187 provides an introduction to (and some examples of) the types of information that can be obtained about nanostructured materials using surface-analysis tools. Of equal importance, both general issues... | |
| ISO/TR 14253-6:2012 expands the scope of decision rules to industrial situations where the default rule of ISO 14253-1 might not be economically optimal. (ISO 14253-1 provides a default decision rule... | |
| ISO/TR 14283 provides fundamental principles for the design and manufacture of active or non-active implants in order to achieve the intended purpose. | |
| ISO/TR 14294:2011 provides general considerations for the assessment of dermal exposure in workplaces. It offers guidance on dermal exposure assessment and the commonly used approaches for measuring dermal exposure. An... | |
| ISO/TR 14345:2012 gives guidance on best practice for fatigue testing under constant- or variable-amplitude loading of welded components in the medium- and high-cycle regimes, corresponding to applied loading that results... | |
| ISO/TR 14468:2010 assesses a measurement process where the characteristic(s) being measured is (are) in the form of attribute data (including nominal and ordinal data). ISO/TR 14468:2010 provides examples of attribute... | |
| ISO/TR 14521:2010 specifies equations for calculating the load capacity of cylindrical worm gears and covers load ratings associated with wear, pitting, worm deflection, tooth breakage and temperature. Scuffing and other... | |
| ISO/TR 14569-1:2007 provides guidelines for test methods for the assessment of resistance to wear by tooth brushing for the following materials: materials used for the preparation of artificial teeth; veneering... | |
| ISO/TR 14639-1:2012 aims to identify the business requirements of an eHealth architecture as well as providing a generic and comprehensive context description to inform architectural structuring of Health Information Systems... | |
| ISO/TR 14646:2007 summarises the work within ISO to define a side impact test method for child restraint systems (CRS). It presents the main background data, and experiences from crash tests... | |
| ISO/TR 14735:2013 aims to contribute to providing general advice on strategies that can be adopted to minimize the likelihood of N-nitrosamine formation in cosmetic products and provide a description of... | |
| ISO/TR 14742:2010 provides a list of recommended cryptographic algorithms for use within applicable financial services standards prepared by ISO/TC 68. It also provides strategic guidance on key lengths and associated... | |
| ISO/TR 14880-5:2010 gives guidelines for the testing of microlenses. It applies to microlenses in arrays where very small lenses are formed inside or on one or more surfaces of a... | |
| ISO/TR 14933:2012 outlines test procedures for evaluating the effects of the interactions between deploying side air bags (SAB) and vehicle occupants. ISO/TR 14933:2012 describes dummies, procedures, instrumentation and test configurations... | |
| ISO/TR 14969:2004 provides guidance for the application of the requirements for quality management systems contained in ISO 13485. It does not add to, or otherwise change, the requirements of ISO... | |
| ISO/TR 14999-1:2005 gives terms, definitions and fundamental physical and technical relationships for interferometric measurements of optical wavefronts and surface form of optical elements. It explains, why some principles of the... | |
| ISO/TR 14999-2:2005 gives fundamental explanations to interferometric measurement objects, describes hardware aspects of interferometers and evaluation methods, and gives recommendations for test reports and calibration certificates. | |
| ISO/TR 14999-3:2005 discusses sources of error and the separation of errors into symmetric and non-symmetric parts. It also describes the reliance of measurements on the quality of a physical reference... | |
| ISO/TR 15144-1:2010 describes a procedure for the calculation of the micropitting load capacity of cylindrical gears with external teeth. It has been developed on the basis of testing and observation... | |
| ISO/TR 15155-2:2012 is intended to provide guidance on the operation of basic test facilities for irrigation equipment evaluation. Its purpose is to provide information sufficient to implement the detailed procedures... | |
| ISO/TR 15155:2005 is intended to provide guidance on the design, selection, installation and use of the equipment required to establish basic test facilities for irrigation equipment evaluation. Its purpose is... | |
| ISO/TR 15377:2007 describes the geometry and method of use for conical-entrance orifice plates, quarter-circle orifice plates, eccentric orifice plates and Venturi tubes with 10,5 degree convergent angles. Recommendations are also... | |
| ISO/TR 15403-2:2006 addresses the specifications of natural gas as a compressed fuel for vehicles as an addendum to ISO 15403-1. Specifically, ISO/TR 15403-2:2006 is intended to satisfy requests for quantitative... | |
| ISO/TR 15462:2006 gives an overview of biodegradation tests for the aquatic environment standardized by ISO and provides recommendations on their use. The biodegradation tests listed are designed to determine the... | |
| ISO/TR 15599:2002 provides a code of dental laboratory procedures which is digital so as to render it language-independent . This makes it convenient to use as a basic reference for... | |
| ISO/TR 15608:2013 provides a uniform system for the grouping of materials for welding purposes. It can also apply to other purposes, such as heat treatment, forming and non-destructive testing. ISO/TR... | |
| ISO/TR 15640:2011 is applicable to contamination control principles for hydraulic fluid power systems and includes guidelines for the selection and application of hydraulic filters. Although control of non-particulate contamination, e.g. | |
| ISO/TR 15655:2003 identifies test methods already in existence and provides guidance on those that need to be developed to characterize the thermo-physical and mechanical properties of structural materials at elevated... | |
| ISO/TR 15656:2003 provides guidance for evaluating the predictive capability of calculation models for structural fire behaviour. It is specific to models that are intended to predict the fire resistance or... | |
| ISO/TR 15658:2009 specifies procedures for the design, performance and reporting of fire tests which are not performed using standardized test equipment, such as furnaces or test chambers, and which are... | |
| ISO/TR 15801:2009 describes the implementation and operation of document management systems that can be considered to store electronic information in a trustworthy and reliable manner. ISO/TR 15801:2009 is for use... | |
| ISO/TR 15847:2008 defines graphical symbols for use on or near equipment in printing systems and finishing systems, including related auxiliary equipment. These graphical symbols are intended to identify the use... | |
| ISO/TR 15916:2004 provides guidelines for the use of hydrogen in its gaseous and liquid forms. It identifies the basic safety concerns and risks, and describes the properties of hydrogen that... | |
| ISO/TR 15922:2011 describes the methods to evaluate the properties of dark-stain phenomenon observed in chromate conversion-coated coiled and sheet products. Chromate conversion coatings, with trivalent or hexavalent chromium ions, are... | |
| ISO/TR 15931:2004 is intended to achieve the following: to make the designation of cast irons and pig irons as simple and as understandable as possible, bearing in mind language barriers... | |
| ISO/TR 16015:2002 defines procedures for the determination of errors, appropriate corrections and the evaluation of measurement uncertainty contributors due to thermal influences in the performance of length measurements for geometrical... | |
| ISO/TR 16044:2004 specifies a basic standard architecture model and parameters used in a database for printing-process control and workflow description. It defines how all of the parameters impacting a manufacturing... | |
| ISO/TR 16056-1:2004 gives a brief introduction to interoperability of telehealth systems and networks, along with definitions of telehealth and related terms. An informative annex describing the Telehealth Technical Reference Architecture... | |
| ISO/TR 16056-2:2004 builds on the introduction to telehealth described in Part 1: Introduction and definitions, and focuses on the technical standards related to real-time applications (including video, audio, and... | |
| ISO/TR 16060:2003 gives a non-exhaustive list of etchants that can be used for the macroscopic and microscopic examination of welds in accordance with ISO 17639 for the following groups of... | |
| ISO/TR 16066:2003 provides a database of typical and difference sets of existing object colour spectral data that are suitable for evaluating the colour reproduction of image input devices. It also... | |
| ISO/TR 16098;2012 specifies standard materials, standard test formulations, equipment and processing methods for evaluating the dispersion of reclaimed rubbers and reclaimed crumb rubbers in rubber mixes. | |
| ISO/TR 16142:2006 considers and identifies certain significant standards and guides that can be useful in the assessment of conformity of medical devices with recognized essential principles of safety and performance. | |
| ISO/TR 16144:2002 describes the procedures used by the United States National Institute of Standards and Technology (NIST) for the certification of the calibration material SRM 2806, which is used in... | |
| ISO/TR 16153:2004 gives the detailed evaluation of uncertainty for volume measurements according to the Guide to the expression of uncertainty in measurements (GUM). ISO 8655-7 covers non-gravimetric methods of volume... | |
| ISO/TR 16268:2009 specifies a procedure for the certification of the areic dose of an ion-implanted analyte element of atomic number larger than that of silicon retained in a working reference... | |
| ISO/TR 16312-2:2007 assesses the utility of physical fire models that have been standardized, are commonly used and/or are cited in national or international standards, for generating fire effluent toxicity data... | |
| ISO/TR 16314:2010 provides a method for the selective determination of polyaromaticity of oil in reclaimed rubbers. The method is based on nuclear magnetic resonance (NMR) spectrometry. | |
| ISO/TR 16323:2003 specifies a test method for the objective evaluation of fabric appearance with a three-dimensional measuring apparatus. | |
| ISO/TR 16344:2012 provides a coherent set of terms, definitions and symbols for concepts and physical quantities related to the overall energy performance of buildings and its components, including definitions of... | |
| ISO/TR 16352:2005 provides a literature survey about the human-machine interface of warning systems in vehicles. It covers the experimental experiences about the efficiency and acceptance of different modalities and combinations... | |
| ISO/TR 16377:2012 seeks to document elements of clarification to ISO 28580:2009 where consensus exists. Other suggestions for clarification will demand further work and consensus building and are not included in... | |
| ISO/TR 16475 gives guidelines for the selection of a proper grout material to repair water leakage through cracks and other discontinuities in concrete structures including the following: conditions of water-leakage... | |
| ISO/TR 16689:2012 contains data from an evaluation of candidates to replace the chromic/phosphoric acid solution (CPA) test for the quality of sealing of anodic oxidation coatings on aluminium. | |
| ISO/TR 16732-2:2012 is an example of the application of ISO 16732-1, prepared in the format of ISO 16732-1. It is intended to illustrate the implementation of the steps of fire... | |
| ISO/TR 16732-3:2013 deals with a fictitious propane storage facility dedicated to the reception of propane transported by tank wagons, the storage of propane in a pressurized vessel and the bulk... | |
| ISO/TR 16738:2009 is intended to provide information to designers, regulators and fire safety professionals on the engineering methods available for evacuation strategies in relation to the evaluation of life safety... | |
| ISO/TR 16743:2013 gives terms and definitions and describes techniques for the characterization of wavefronts influenced by optical systems and optical components. It describes basic configurations for a variety of wavefront... | |
| ISO/TR 16764:2003 consists of a comparison of electromagnetic interference/electro magnetic compatibility (EMI/EMC) worldwide standards of interest to the lift industry. | |
| ISO/TR 16806:2003 describes how to calculate the loading limits for a pneumatic slide based upon external forces applied in the three principle planes of a tool plate, and applied at... | |
| ISO/TR 16982:2002 provides information on human-centred usability methods which can be used for design and evaluation. It details the advantages, disadvantages and other factors relevant to using each usability method. | |
| ISO/TR 17055 specifies a method for the determination of the content of silicon in steel by means of inductively coupled plasma emission spectrometry. The method is applicable to silicon contents... | |
| ISO/TR 17068:2012 details the authorized custody services of a Trusted Third Party Repository (TTPR) in order to ensure provable integrity and authenticity of the clients' digital records and serve as... | |
| ISO/TR 17098:2013 provides a non-exhaustive overview of substances and materials that can cause a sustained impediment to recycling activities and is intended to assist in the assessment requirements set out... | |
| ISO/TR 17209:2013 specifies the dimensions and provides other data relating to cavities with ISO 725 UN and UNF threads in which two-, three-, and four-port screw-in cartridge valves are mounted,... | |
| ISO/TR 17252 gives guidelines on the applicability of the existing reaction to fire tests to fire safety engineering and fire modelling. It also gives general guidance on the type of... | |
| ISO/TR 17321-2:2012 provides information about methods for determining scene analysis transforms based on the minimization of errors in estimated scene or focal-plane colourimetry, including corresponding colourimetry. These transforms are limited... | |
| ISO/TR 17384:2008 describes the message contents and format of the air interface between the infrastructure and the in-vehicle unit in the Interactive CDRG system. The air interface message set for... | |
| ISO/TR 17400:2003 is applicable to new projects and programs and to redesigned and upgraded launch pad and integration sites. ISO/TR 17400:2003 establishes the testing phases, goals, and general aspects for... | |
| ISO/TR 17452:2007 gives guidelines for using the unified modelling language (UML) for defining and documenting interfaces between intelligent transport systems (ITS) and transport information and control systems (TICS). It presents... | |
| ISO/TR 17641-3:2005 outlines the test methods and procedures for carrying out externally loaded tests to assess susceptibility to hot cracking. The following tests are described: Hot tensile tests Varestraint and... | |
| ISO/TR 17671-1 gives general guidance for fusion welding of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged). The processes and techniques referred to in this part... | |
| ISO/TR 17671-3 gives general guidance for the satisfactory production and control of welding and details the possible detrimental phenomena that may occur with advice on methods by which they may... | |
| ISO/TR 17671-4 gives general guidance for the satisfactory design, production and control of welding and details the possible detrimental effects which may occur, together with advice on methods by which... | |
| ISO/TR 17671-5:2004 gives general recommendations for the welding of clad steels by means of appropriate arc welding processes and electroslag strip cladding. It is generally applicable to all clad steels... | |
| ISO/TR 17671-6:2005 gives general guidance for laser beam welding of metallic materials in all forms (e.g. cast, wrought, extruded, forged), and associated processes. | |
| ISO/TR 17671-7:2004 may be used for the electron beam welding (process No. 51 in accordance with ISO 4063) of weldable metallic materials in accordance with ISO/TR 15608. It does not... | |
| ISO/TR 17737 provides industrial hygienists, employers and workers with a broad overview of isocyanates, their uses in industry, methods of measurement and guidance on choosing the appropriate sampling strategy. While... | |
| ISO/TR 17766:2005 gives performance corrections for all worldwide designs of centrifugal pumps of conventional design, in the normal operating range, with open or closed impellers, single or double suction, pumping... | |
| ISO/TR 17784:2003 contains general information on rubber and plastic hoses with regard to both their properties and their practical application. This includes, amongst other things, the properties of materials used... | |
| ISO/TR 17844:2004 contains further methods, in addition to those given in ISO/TR 17671-2, for avoidance of cold cracking. The document gives guidance on the manual, semi-mechanized, mechanized and automatic arc... | |
| ISO/TR 18112:2006 summarizes regulatory requirements and associated guidance for information supplied by the manufacturer with IVD medical devices intended for professional use. Information supplied by the manufacturer includes labels on... | |
| ISO/TR 18124:2006 specifies a method for testing the strength of the weld line in the metal layer and the adhesion between the different layers of multilayer M pipes by the... | |
| ISO/TR 18392:2005 gives guidance for determining backgrounds in X-ray photoelectron spectra. The methods of background determination described are applicable for evaluation of spectra of photoelectrons and Auger electrons excited by... | |
| ISO/TR 18394:2006 provides guidelines for identifying chemical effects in X-ray or electron-excited Auger-electron spectra and for using these effects in chemical characterization. | |
| ISO/TR 18492:2005 provides practical methodological guidance for the long-term preservation and retrieval of authentic electronic document-based information, when the retention period exceeds the expected life of the technology (hardware and... | |
| ISO/TR 18532:2009 describes a broad range of statistical methods applicable to the management, control and improvement of processes. | |
| ISO/TR 18569:2004 provides assistance to the designer or manufacturer of machinery and related equipment on the contents and how to apply the relevant Type A and Type B safety of... | |
| ISO/TR 18690:2012 provides guidance for the selection, use and maintenance of personal protective equipment and safety and occupational footwear. It is intended for footwear manufacturers and suppliers, employers and self-employed... | |
| ISO/TR 18792:2008 is designed to provide currently available technical information with respect to the lubrication of industrial gear drives up to pitch line velocities of 30 m/s. It is intended... | |
| ISO/TR 19032:2006 describes a method that demonstrates the use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor conditions in weathering tests used for plastics. | |
| ISO/TR 19038:2005 provides the user with technical support and details for the safe and efficient implementation of the Triple Data Encryption Algorithm (TDEA) modes of operation for the enhanced cryptographic... | |
| ISO/TR 19122:2004 is applicable to the following aspects of the field of Geographic Information/Geomatic s: To develop a Type 3 report, which describes a system for the qualification and certification,... | |
| ISO/TR 19201:2013 provides guidance for selecting appropriate vibration standards for specific machine types, and thus selecting the appropriate vibration measurement and evaluation method. Synopses are given of ISO 10816 (evaluation... | |
| ISO/TR 19319:2013 describes: functions and their relevance to lateral resolution: point spread function (PSF), line spread function (LSF), edge spread function (ESF), modulation transfer function (MTF) and contrast transfer function... | |
| ISO/TR 19358:2002 deals with the testing and assessment of speech-related products and services, and is intended for use by specialists active in the field of speech technology, as well as... | |
| ISO/TR 19480:2005 gives guidance and other provisions for the training, assessment and approval of fusion operators, with the aim of establishing and maintaining their competency in the construction of polyethylene... | |
| ISO/TR 19661:2010 provides a guide to International Standards applicable to mobile cranes (crawler cranes, railway cranes, wheel-mounted cranes and any variations thereof that retain the same fundamental characteristics) and a... | |
| ISO/TR 19972-1:2009 provides a means for determining the reliability of hydraulic fluid power components using: estimates from a design analysis; analysis of laboratory testing to failure or suspension; analysis of... | |
| ISO/TR 20152-3:2013 describes the procedures necessary for the recognition of new wood species by ISO 20152‑1 and ISO 20152‑2 for the evaluation of structural wood adhesives. | |
| ISO/TR 20172:2009 establishes a European grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608. It is also applicable for other purposes such... | |
| ISO/TR 20173:2009 provides an American grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608:2005. It may also apply for other purposes, such... | |
| ISO/TR 20432:2007 provides guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement. ISO/TR 20432:2007 describes a method of deriving reduction factors for geosynthetic soil reinforcement materials... | |
| ISO/TR 20514:2005 describes a pragmatic classification of electronic health records, provides simple definitions for the main categories of EHR and provides supporting descriptions of the characteristics of electronic health records... | |
| ISO/TR 20572:2007 establishes the performance requirements for accessories (laces and eyelets, metal components and touch and close fasteners) for footwear (not for finished footwear), irrespective of the material, in order... | |
| ISO/TR 20573:2006 establishes the performance requirements for heel and top piece components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the... | |
| ISO/TR 20879:2007 establishes the performance requirements for uppers component for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use. | |
| ISO/TR 20880:2007 establishes the performance requirements for outsoles components for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use. | |
| ISO/TR 20881:2007 establishes the performance requirements for insoles components for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use... | |
| ISO/TR 20882:2007 establishes the performance requirements for lining and insock components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end... | |
| ISO/TR 20883:2007 establishes the performance requirements for shanks components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or... | |
| ISO/TR 21089:2004 offers a guide to trusted end-to-end information flow for health(care) records and to the key trace points and audit events in the electronic entity/act record lifecycle (from point... | |
| ISO/TR 21092:2004 gives a list of different codes (CAS-USA, EINECS, CAS-EINECS, Fema, EC and FDA numbers) used for the characterization of essential oils. | |
| ISO/TR 21254-4:2011 describes techniques for the inspection and detection of laser-induced damage on optical surfaces and in the bulk of optical components. | |
| ISO/TR 21548:2010 is an implementation guide for ISO/TS 21547. ISO/TR 21548:2010 will provide a methodology that will facilitate the implementation of ISO/TS 21547 in all organizations that have the responsibility... | |
| ISO/TR 21707:2008 specifies a set of standard terminology for defining the quality of data being exchanged between data suppliers and data consumers in the ITS domain. This applies to Traffic... | |
| ISO/TR 21730:2007 provides guidance for the deployment, use and management of mobile wireless communication and computing equipment in healthcare facilities in a way that promotes effective electromagnetic compatibility (EMC) among... | |
| ISO/TR 21808:2009 sets out guidance for the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters while carrying out their duties. The PPE... | |
| ISO/TR 21828:2010 gives guidance on the International Standards and national standards which apply to the testing of unshaped refractory materials, including, but not limited to, sampling, forming, obtaining test specimens... | |
| ISO/TR 22007-5:2011 presents the results of interlaboratory testing for the determination of thermal conductivity and thermal diffusivity of two poly(methyl methacrylate) (PMMA) materials by means of the transient and the... | |
| ISO/TR 22134:2007 proposes guidelines for socioterminology principles, methods and vocabularies. | |
| ISO/TR 22157-2:2004 provides informative guidelines for staff in laboratories on how to perform tests according to ISO 22157-1:2004. | |
| ISO/TR 22201-3:2013 provides additional information and process for the development of the instruction manual required by ISO 22201:2009 (PESSRAL) and ISO 22201-2 (PESSRAE) for programmable electronic systems (PES). | |
| ISO/TR 22305 records the data and conclusions from a review of international collaborative studies to establish the tolerance for checks of the carbon monoxide yields declared by cigarette manufacturers for... | |
| ISO/TR 22335:2007 describes a method for determining ion-sputtering rates for depth profiling measurements with Auger electron spectroscopy (AES) and X‑ray photoelectron spectroscopy (XPS) where the specimen is ion-sputtered over a... | |
| ISO/TR 22411:2008 presents ergonomics data and guidelines for applying ISO/IEC Guide 71 in addressing the needs of older persons and persons with disabilities in standards development. It provides ergonomics data... | |
| ISO/TR 22442-4:2010 offers suggestions for designing and conducting validation assays to help determine if processes used in the manufacture of medical devices derived from non-viable animal tissues might serve to... | |
| ISO/TR 22514-4:2007 describes process capability and performance measures that are commonly used. | |
| ISO/TR 22588:2005 specifies standard measurement and evaluation techniques for determining the absorption-induced effects caused by lasers in laser optical components in order to provide useful information to reduce conflict between... | |
| ISO/TR 22648:2007 establishes the performance requirements for stiffener and toepuff components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end... | |
| ISO/TR 22676:2006 offers guidance on: the specification of the test loading conditions of ISO 22675; the design of appropriate test equipment. Most of the text of ISO/TR 22676:2006 relates to... | |
| ISO/TR 22790:2007 provides a common conceptual model of information management related to the process of prescribing or ordering medication. This Technical Report provides a set of optional business requirements that... | |
| ISO/TR 22824:2003 provides guidance, based on the experience of experts, for setting appropriate requirements, in specifications and other standards and contract documents, on ferrite content of nominally austenitic or duplex... | |
| ISO/TR 22849:2011 provides information for the application of bevel and hypoid gears using the geometry in ISO 23509, the capacity as determined by ISO 10300 (all parts) and the tolerances... | |
| ISO/TR 22869:2005 provides guidance to medical laboratories describing how a medical laboratory can implement a quality system to meet the specific technical and management requirements for quality and competence in... | |
| ISO/TR 22898:2006 has been prepared in order to review whether the current ISO furnace based fire resistance testing methods remain appropriate for establishing the performance of elements of structure when... | |
| ISO/TR 22957:2009 presents a recommended set of procedures and activities that are advisable when performing analysis, selection and implementation of project phases associated with electronic document management systems technologies. ISO/TR... | |
| ISO/TR 22971:2005 provides users with practical guidance to the use of ISO 5725-2:1994 and presents simplified step-by-step procedures for the design, implementation, and statistical analysis of inter-laboratory studies for assessing... | |
| ISO/TR 22979:2006 provides guidance on the application of Parts 3, 7 and 9 of the ISO 11979 series of International Standards for intraocular lenses (IOLs). It addresses factors to be... | |
| ISO/TR 230-8:2010 is concerned with the different types of vibration that can occur between the tool-holding part and the workpiece-holding part of a machine tool. (For simplicity, these will generally... | |
| ISO/TR 230-9:2005 provides information on a possible estimation of measurement uncertainties for measurements according to ISO 230. | |
| ISO/TR 23081-3:2011 provides guidance on conducting a self-assessment on records metadata in relation to the creation, capture and control of records. The self-assessment helps to: identify the current state of... | |
| ISO/TR 23211:2009 provides information about the functional requirements of instrumentation for measuring the water level in a well using automated pressure transducer methods. ISO/TR 23211:2009 provides guidance for the proper... | |
| ISO/TR 23462:2007 provides a framework within which an organization can establish the basis for the development of programme/project management specifications and plans when undertaking the execution of a specific programme/project. | |
| ISO/TR 23602:2005 presents an investigation to quantify the required material toughness for the operational safety of round steel chains. | |
| ISO/TR 23605:2010 provides guidance for the preparation of all technical product specifications in the mechanical engineering field. The document operates as an index to the many ISO standards applicable to... | |
| ISO/TR 23697:2011 can be applied to textiles and textile products and is concerned only with test methods which operate in a continuous scale to yield a single numerical figure as... | |
| ISO/TR 23849:2010 is intended to explain the application of IEC 62061 and ISO 13849-1 in the design of safety-related control systems for machinery. | |
| ISO/TR 24014-2:2013 introduces a generic conceptual framework that can be applied to all Interoperable Fare Management Systems (IFMS) compliant with ISO 24014-1, as the basis for business practices relating to... | |
| ISO/TR 24014-3:2013 describes how to implement Interoperable Fare Management (IFM) applications in a multi-application environment, and the additional roles and use cases that appear. | |
| ISO/TR 24094:2006 describes the validation of the calorific value and density calculated from current practice natural gas analysis by statistical comparison with values obtained by measurement using a reference calorimeter... | |
| ISO/TR 24098:2007 describes the procedure for developing Intelligent Transport System (ITS) deployment plans utilizing ITS system architectures. The document consists of the basic policy of ITS deployment and the procedure... | |
| ISO/TR 24156:2008 gives guidelines for using a subset of the Unified Modeling Language, UML, to represent the results of terminological concept analysis. It describes how object modelling techniques can be... | |
| ISO/TR 24475:2010 is aimed at contributing to the training of personnel in cosmetic production plants within the context of the introduction of Good Manufacturing Practices. It is intended to complement... | |
| ISO/TR 24498:2006 presents guidelines for the selection of the best method for the estimation of the precision of methods for testing pulp, paper and board. | |
| ISO/TR 24529:2008 deals with the use of UML within International Standards, Technical Specifications and Technical Reports and related documents. It discusses the application of the Unified Modelling Language (UML) to... | |
| ISO/TR 24699:2009 provides guidelines for inclusion of environmental aspects in standards for rubber and rubber products. It proposes an approach which is directed at minimizing any adverse environmental impact of... | |
| ISO/TR 25102:2008 discusses the application of use cases for requirements and related aspects of a software-intensive system such as an intelligent transport system (ITS). The scope of this ISO/TR 25102:2008... | |
| ISO/TR 25104:2008 discusses the development for generic education and training requirements for the teaching of ITS architecture, and the acquisition of skills to interpret and develop ITS architectures. ISO/TR 25104:2008... | |
| ISO/TR 25107:2005 gives guidelines for non-destructive testing (NDT) training syllabuses, with the intention of harmonising and maintaining the general standard of training of NDT personnel for industrial needs. It also... | |
| ISO/TR 25108:2005 gives guidelines for non-destructive testing (NDT) training organizations, with the intention of harmonizing and maintaining the general standard of training of NDT personnel for industrial needs. It also... | |
| ISO/TR 25257:2009 covers: specifying the international business requirements for an international coding system for medicinal products; analysing the most significant international coding systems for medicinal products in current use and... | |
| ISO/TR 25398:2006 provides guidelines for those such as employers, national authorities and manufacturers of earth-moving machinery who are required to determine, assess and document the daily whole body vibration exposure... | |
| ISO/TR 25417:2007 specifies definitions of acoustical quantities and terms used in noise measurement documents prepared by ISO Technical Committee TC 43, Acoustics, Subcommittee SC 1, Noise, together with... | |
| ISO/TR 25477:2008 provides guidance on using image analysis to measure various visual properties of pulp, paper, board and the corresponding products that have been printed or coated. | |
| ISO/TR 25599:2005 collects the design, manufacturing, use and maintenance requirements and recommendations for jib cranes in ISO and IEC International Standards. | |
| ISO/TR 25741:2008 provides a compilation of relevant safety standards pertaining to protection of the user and vertical transportation equipment during seismic activity. | |
| ISO/TR 25743:2010 investigates and highlights the main risks associated with using lifts (elevators) for the evacuation of persons in various types of emergency. The types of emergency under study arise... | |
| ISO/TR 25901:2007 defines terms specifically related to welding and allied processes, together with their definitions. | |
| ISO/TR 26122:2008 provides guidance on work process analysis from the perspective of the creation, capture and control of records. It identifies two types of analyses, namely functional analysis (decomposition of... | |
| ISO/TR 26369:2009 reviews and evaluates the methods which are currently used to assess, for regulatory or self-regulatory purposes, the photoprotection of sun protection products applied on human body. It is... | |
| ISO/TR 26762:2008 describes the production measurements, in terms of both hardware and procedures, that can be used to allocate the gas and condensate back to the individual concessions, reservoirs and... | |
| ISO/TR 26946:2011 describes a method for characterizing the porosity of thermally sprayed coatings by metallographical examination. This method is particularly applicable to oxide coatings, such as Al2O3... | |
| ISO/TR 27165:2012 provides definitions for wall constructions of thermoplastics pipes intended to be used in pressure and non-pressure pipe applications. It takes into account as far as possible already existing... | |
| ISO/TR 27507:2010 gives recommendations for automotive crankshaft bearing environments. It specifies the various dimensions and conditions that most engine manufacturers can achieve with current production machinery in order to produce... | |
| ISO/TR 27609:2007 presents an evaluation of a round-robin test of vibration measurement methods for determining vibration in hand-held grinders. The aim of the round-robin test was to establish a test... | |
| ISO/TR 27628:2007 contains guidelines on characterizing occupational nanoaerosol exposures and represents the current state-of-the-art, with an emphasis on nanometre-diameter particles. Background information is provided on the mechanisms of nanoaerosol formation... | |
| ISO/TR 27809:2007 considers the control measures required to ensure patient safety in respect to health software products. It does not apply to software which is: necessary for the proper application... | |
| ISO/TR 2801:2007 sets out guidance for the selection, use, care and maintenance of clothing designed to provide protection against heat and flame. | |
| ISO/TR 28118:2009 establishes the performance indicators for national libraries. It is also applicable to libraries with regional tasks and without a defined population to be served, as many of their... | |
| ISO/TR 28642:2011 identifies three types of topics related to shade conformity and interconvertibility of monochromatic and polychromatic tissues and materials related to the discipline of dentistry; it describes visual and... | |
| ISO/TR 28682:2008 provides a survey of the current status and plan of ITS standards and their deployment, identifies common problems related to international standardization activities, and provides collective opinions to... | |
| ISO/TR 28821:2012 lists the hose connections for equipment for welding, cutting and allied processes which are standardised within countries of ISO member bodies. Its purpose is to prevent further proliferation... | |
| ISO/TR 29381:2008 describes methods for evaluating tensile properties of metallic materials (true stress-strain curve and derived parameters) using an instrumented indentation test. The ranges of application of instrumented indentation tests... | |
| ISO/TR 29662:2009 is not intended to be a comprehensive manual on flash point tests and the interpretation of test results, however it covers the key aspects of these subjects. The... | |
| ISO/TR 29846:2008 contains assigned kPa values for whole psi values in the range of 1 psi to 152 psi, for inflation pressures for use in certain regions of the world... | |
| ISO/TR 29901:2007 describes the steps necessary to specify, to use and to analyse full factorial designs with four factors through illustration, with five distinct applications of this methodology. Depending on... | |
| ISO/TR 29944:2010 describes the selection and calculation of the stopping distance and braking force used in the application of ISO 6292. It does not cover test procedures, control forces or... | |
| ISO/TR 3834-6:2007 gives guidelines for the implementation of requirements given in the other parts of ISO 3834, and is intended to help manufacturers and users select that part of ISO... | |
| ISO/TR 4277:2009 describes a conventional test for the evaluation of the free fluorides content of natural, artificial and recovered cryolite. This method is applicable to products having free fluorides content... | |
| ISO/TR 581:2005 gives general principles related to the weldability of metallic materials. These principles apply to all welding processes and all different types of construction whatever properties they may have. | |
| ISO/TR 5925-2:2006 provides a commentary that explains the general philosophy and factors on which the test specified in Part 1 of ISO 5925 has been designed, to describe the limitations... | |
| ISO/TR 7250-2:2010 provides statistical summaries of body measurements together with database background information for working age people in the national populations of individual ISO member bodies. The data are intended... | |
| ISO/TR 7620:2005 describes a classification system for the reporting and tabulation of the chemical resistance of rubber materials. It also provide guidance on the testing and evaluation of rubber with... | |
| ISO/TR 7861:2002 presents injury risk curves that can be used for injury risk assessment in the evaluation of occupant protection in road-vehicle frontal impact. The measurements were made on frontal-impact... | |
| ISO/TR 834-2:2009 establishes general principles for measuring the uniformity of furnace exposure of samples tested in accordance with the requirements of ISO 834-1. ISO/TR 834-2:2009 specifies the type and location... | |
| ISO/TR 834-3:2012 provides background and guidance on the use and limitations of the fire resistance test method and the application of the data obtained. It is designed to be of... | |
| ISO/TR 8550-2:2007 provides guidance for acceptance sampling of products that are supplied in lots and that can be classified as consisting of discrete items (i.e. discrete articles of product). Each... | |
| ISO/TR 8550-3:2007 provides guidance for acceptance sampling of products that are supplied in lots and that can be classified as consisting of discrete items (i.e. discrete articles of product). Each... | |
| ISO/TR 8713:2012 establishes a vocabulary of terms and the related definitions used in ISO TC22/SC21 standards. These terms are specific to the electric propulsion systems of electrically propelled road vehicles,... | |
| ISO/TR 9212:2006 reviews the current status of direct and indirect bedload-measurement techniques. The methods are mainly based on grain size distribution of the bedload, channel width, depth and velocity of... | |
| ISO/TR 9241-308:2007 gives guidelines for surface-conduction electron-emitter displays (SED). | |
| ISO/TR 9241-309:2008 gives guidelines for organic light‑emitting diode (OLED) displays. | |
| ISO/TR 9241-310:2010 provides a summary of existing knowledge on ergonomics requirements for pixel defects in electronic displays at the time of its publication. It also gives guidance on the specification... | |
| ISO/TR 9241-331:2012 establishes an ergonomic point of view for the optical properties of autostereoscopic displays (ASDs), with the aim of reducing visual fatigue caused by stereoscopic images on those displays. | |
| ISO/TR 9272:2005 presents guidelines for determining, by means of interlaboratory test programmes (ITPs), precision for test method standards used in the rubber manufacturing and the carbon black industries. It uses... | |
| ISO/TR 945-2:2011 deals with the two-dimensional characterisation of graphite form and size in cast irons. A standard method for determining graphite form by image analysis had not been developed at... | |
| ISO/TR 9464:2008 provides guidance on the use of ISO 5167:2003 (all parts). ISO 5167:2003 is an International Standard for flow measurement based on the differential pressure generated by a constriction... | |
| ISO/TR 9564-4:2004 provides guidelines for personal identification number PIN handling in open networks, presenting finance industry best-practice security measures for PIN management and the handling of financial card originated transactions... | |
| ISO/TR 9824:2007 provides a synopsis of the methods of flow gauging that can be deployed in closed conduits flowing part full, i.e. with a free open water surface. This Technical... | |
| ISO/TR16765:2002 consists of a comparison of the requirements of selected topics as covered by standards in use in the following parts of the world: Europe, Australia, Russia, Japan, USA, Canada,... | |
| ISO/TR18267:2013 documents the findings of a review of design standards undertaken by ISO/TC 165 to assess how an ISO International Standard for the design of timber structures might be developed... | |
| ISO/TR:25679:2005 enumerates the symbols and definitions used in International Standards for specific methods of mechanical testing of metallic materials, which are the responsibility of ISO Technical Committee 164, Mechanical testing... | |
| ISO/TS 10128:2009 specifies three methods for the adjustment of the digital content data that is input to a printing system to achieve consistency in the printed results among a number... | |
| ISO/TS 10272-2:2006 describes a horizontal method for the enumeration of Campylobacter spp. It is applicable to products intended for human consumption or for the feeding of animals, and to environmental... | |
| ISO/TS 10272-3:2010 describes a horizontal method for the semi-quantitative determination of Campylobacter spp. It is applicable to products intended for human consumption or for the feeding of animals, and to... | |
| ISO/TS 10303-1001:2010-07 specifies the application module for Appearance assignment. The following are within the scope of ISO/TS 10303-1001:2010-07: definition of the visual characteristics of a representation item; definition of representations... | |
| ISO/TS 10303-1002:2006 specifies the application module for Colour. The following is within the scope of ISO/TS 10303-1002:2006: the definition of colour information. | |
| ISO/TS 10303-1003:2010-07 specifies the application module for Curve appearance. The following are within the scope of ISO/TS 10303-1003:2010-07: the definition of appearance information for curves; items within the scope of... | |
| ISO/TS 10303-1004:2011-10 specifies the application module for Elemental geometric shape. The following are within the scope of ISO/TS 10303-1004:2011-10: definition of a geometric coordinate space; definition of a geometric model; | |
| ISO/TS 10303-1005:2010-07 specifies the application module for Elemental topology. The following are within the scope of ISO/TS 10303-1005:2010-07: the definition of the overall class of topological elements; the definition of... | |
| ISO/TS 10303-1006:2010-07 specifies the application module for Foundation representation. The following are within the scope of ISO/TS 10303-1006:2010-07: definition of a context of representation; definition of a kind of representation... | |
| ISO/TS 10303-1007:2010-07 specifies the application module for General surface appearance. The following are within the scope of ISO/TS 10303-1007:2010-07: specification of visual attributes which may be assigned to curves belonging... | |
| ISO/TS 10303-1008:2008 specifies the application module for Layer assignment. The following are within the scope of ISO/TS 10303-1008:2008: assignment of representation items to layers; identification of layers; items within the... | |
| ISO/TS 10303-1009:2010-07 specifies the application module for Shape appearance layers. The following are within the scope of ISO/TS 10303-1009:2010-07: assignment of layers to shape items; assignment of visual attributes to... | |
| ISO/TS 10303-1010:2004 specifies the application module Date time. The following are within the scope of ISO/TS 10303-1010:2004: definition of a date according to the Gregorian calendar; definition of a point... | |
| ISO/TS 10303-1011:2004 specifies the application module Person organization. The following are within the scope of ISO/TS 10303-1011:2004: definition of a person; definition of an organization; definition of a relationship between... | |
| ISO/TS 10303-1012:2010-03 specifies the application module for Approval. The following are within the scope of ISO/TS 10303-1012:2010-03: characterization of an approval; assignment of an approval to product or activity data; | |
| ISO/TS 10303-1013:2011-10 specifies the application module for Person organization assignment. The following are within the scope of ISO/TS 10303-1013:2011-10: association of an organization with activity or product data; association of... | |
| ISO/TS 10303-1014:2004 specifies the application module Date time assignment. The following are within the scope of ISO/TS 10303-1014:2004: assignment of a date with a role to activity or product data; | |
| ISO/TS 10303-1015:2004 specifies the application module Security classification. The following are within the scope of ISO/TS 10303-1015:2004: definition of a security classification level; asignment of a security classification level to... | |
| ISO/TS 10303-1016:2010-07 specifies the application module for Product categorization. The following are within the scope of ISO/TS 10303-1016:2010-07: definition and assignment categories of products; relationship between two product categories; items... | |
| ISO/TS 10303-1017:2010-03 specifies the application module for Product identification. The following are within the scope of ISO/TS 10303-1017:2010-03: representation of the data that identify a product. | |
| ISO/TS 10303-1018:2004 specifies the application module Product version. The following are within the scope of ISO/TS 10303-1018:2004: the identification of a version of a product. | |
| ISO/TS 10303-1019:2006 specifies the application module for Product view definition. The following are within the scope of ISO/TS 10303-1019:2006: characterization of a version of a product, suitable for one or... | |
| ISO/TS 10303-1020:2006 specifies the application module for Product version relationship. The following are within the scope of ISO/TS 10303-1020:2006: identification of a relationship between two versions of product; identification of... | |
| ISO/TS 10303-1021:2011-10 specifies the application module for Identification assignment. The following are within the scope of ISO/TS 10303-1021:2011-10: assignment of an identification to a product or activity data. | |
| ISO/TS 10303-1022:2010-03 specifies the application module for Part and version identification. The following are within the scope of ISO/TS 10303-1022:2010-03: identification of a part; identification of a non-countable material; identification... | |
| ISO/TS 10303-1023:2004 specifies the application module Part view definition. The following are within the scope of ISO/TS 10303-1023:2004: identification of a characterization of a version of a part, relevant in... | |
| ISO/TS 10303-1024:2004 specifies the application module Product relationship. The following are within the scope of ISO/TS 10303-1024:2004: specification of a relationship between two products. | |
| ISO/TS 10303-1025:2011-10 specifies the application module for Alias identification. The following are within the scope of ISO/TS 10303-1025:2011-10: assignment of an alias identifier to product or activity data; items within... | |
| ISO/TS 10303-1026:2010-03 specifies the application module for Assembly structure. The following are within the scope of ISO/TS 10303-1026:2010-03: specification of the use of a product version as a component of... | |
| ISO/TS 10303-1030:2006 specifies the application module for Property assignment. The following are within the scope of ISO/TS 10303-1030:2006: Assignment of a property to product data; Use of an independent property... | |
| ISO/TS 10303-1032:2010-07 specifies the application module for Shape property assignment. The following are within the scope of ISO/TS 10303-1032:2010-07: identification of an object that may have properties but cannot be... | |
| ISO/TS 10303-1033:2004 specifies the application module External model. The following are within the scope of ISO/TS 10303-1033:2004: definition of a 3D geometric representation whose content is provided in an external... | |
| ISO/TS 10303-1034:2004 specifies the application module Product view definition properties. The following are within the scope of ISO/TS 10303-1034:2004: assignment of properties to product view definitions; assignment of properties to... | |
| ISO/TS 10303-1036:2004 specifies the application module Independent property. The following are within the scope of ISO/TS 10303-1036:2004: specification of a property independent of its being a property of some object; | |
| ISO/TS 10303-1038:2006 specifies the application module for Independent property representation. The following is within the scope of ISO/TS 10303-1038:2006: association of representation with an independent property. | |
| ISO/TS 10303-1039:2004 specifies the application module Geometric validation property representation. The following are within the scope of ISO/TS 10303-1039:2004: assignment of geometric validation properties to individual solid or surface models. | |
| ISO/TS 10303-1040:2008 specifies the application module for Process property assignment. The following are within the scope of ISO/TS 10303-1040:2008: specification of a property of an activity; representation of a property... | |
| ISO/TS 10303-1041:2004 specifies the application module Product view definition relationship. The following are within the scope of ISO/TS 10303-1041:2004: context-dependent relationship between two product definitions; representation of the fact that... | |
| ISO/TS 10303-1042:2004 specifies the application module Work request. The following are within the scope of ISO/TS 10303-1042:2004: identification and characterization a work request; association of a work request with an... | |
| ISO/TS 10303-1043:2004 specifies the application module Work order. The following are within the scope of ISO/TS 10303-1043:2004: identification and characterization of a work order; identification of the activities that are... | |
| ISO/TS 10303-1044:2004 specifies the application module Certification. The following are within the scope of ISO/TS 10303-1044:2004: definition of a certificate; assignment of a certificate to activity or product data. | |
| ISO/TS 10303-1046:2006 specifies the application module for Product replacement. The following are within the scope of ISO/TS 10303-1046:2006: identification of a product as a potential replacing product for another product; | |
| ISO/TS 10303-1047:2010-07 specifies the application module for Activity. The following are within the scope of ISO/TS 10303-1047:2010-07: definition of an activity; relationship between two activities; relationship between an activity and... | |
| ISO/TS 10303-1049:2004 specifies the application module Activity method. The following are within the scope of ISO/TS 10303-1049:2004: identification and description of an activity method. | |
| ISO/TS 10303-1050:2010-07 specifies the application module for Dimension tolerance. The following are within the scope of ISO/TS 10303-1050:2010-07: specification of geometric dimensions of a feature of a shape; dimensions that... | |
| ISO/TS 10303-1051:2010-07 specifies the application module for Geometric tolerance. The following are within the scope of ISO/TS 10303-1051:2010-07: the data constructs necessary for the specification of geometric tolerance requirements for... | |
| ISO/TS 10303-1052:2007 specifies the application module for Default tolerance. The following are within the scope of ISO/TS 10303-1052:2007: assignment of default tolerances for the geometric dimensions of shape elements; assignment... | |
| ISO/TS 10303-1054:2004 specifies the application module Value with unit. The following are within the scope of ISO/TS 10303-1054:2004: quantity values expressed with a unit; uncertainty values, expressed with a unit; | |
| ISO/TS 10303-1055:2004 specifies the application module Part definition relationship. The following are within the scope of ISO/TS 10303-1055:2004: representation of the fact that a part version results from the transformation... | |
| ISO/TS 10303-1056:2010-03 specifies the application module for Configuration item. The following are within the scope of ISO/TS 10303-1056:2010-03: identification of the configuration of a product for a given product concept. | |
| ISO/TS 10303-1057:2004 specifies the application module Effectivity. The following are within the scope of ISO/TS 10303-1057:2004: identification of a validity domain; identification of a validity domain as an interval of... | |
| ISO/TS 10303-1058:2010-03 specifies the application module for Configuration effectivity. The following are within the scope of ISO/TS 10303-1058:2010-03: Specification of effectivity constraints applied to the configuration of a product. | |
| ISO/TS 10303-1059:2004 specifies the application module Effectivity application. The following are within the scope of ISO/TS 10303-1059:2004: application of effectivity to product or activity data. | |
| ISO/TS 10303-1060:2004 specifies the application module Product concept identification. The following are within the scope of ISO/TS 10303-1060:2004: identification of a kind of product from user requirements. | |
| ISO/TS 10303-1061:2006 specifies the application module for Project. The following are within the scope of ISO/TS 10303-1061:2006: definition of a project, of its responsible organization and of its planned and... | |
| ISO/TS 10303-1062:2011-10 specifies the application module for Contract. The following are within the scope of ISO/TS 10303-1062:2011-10: creating and identifying the contract; associating activity or product data to the contract. | |
| ISO/TS 10303-1063:2006 specifies the application module for Product occurrence. The following are within the scope of ISO/TS 10303-1063:2006: identification of the occurrence of a product version in a product structure; | |
| ISO/TS 10303-1064:2004 specifies the application module Event. The following are within the scope of ISO/TS 10303-1064:2004: characterization of an event; characterization of a relationship between two events; characterization of an... | |
| ISO/TS 10303-1065:2004 specifies the application module Time interval. The following are within the scope of ISO/TS 10303-1065:2004: identification of a time interval; characterization of a bounded time interval; representation of... | |
| ISO/TS 10303-1068:2010-07 specifies the application module for Constructive solid geometry 3D. The following are within the scope of ISO/TS 10303-1068:2010-07: constructive solid geometry; half space; solid volume described by its... | |
| ISO/TS 10303-1070:2004 specifies the application module for Class. The following are within the scope of ISO/TS 10303-1070:2004: the existence of a class or set; the distinction between a class or... | |
| ISO/TS 10303-1071:2005 specifies the application module for Class of activity. The following are within the scope of ISO/TS 10303-1071:2005: the existence of a class of activity. | |
| ISO/TS 10303-1074:2005 specifies the application module for Property condition. The following are within the scope of ISO/TS 10303-1074:2005: a necessary property condition for membership of a class of product; a... | |
| ISO/TS 10303-1077:2005 specifies the application module for Class of product. The following are within the scope of ISO/TS 10303-1077:2005: the existence of a class of product. | |
| ISO/TS 10303-1085:2005 specifies the application module for Property identification. The following are within the scope of ISO/TS 10303-1085:2005: the unit of measure used to identify a physical quantity instance; the... | |
| ISO/TS 10303-1092:2005 specifies the application module for Maths value. The following are within the scope of ISO/TS 10303-1092:2005: a maths value that is a real; a maths value that is... | |
| ISO/TS 10303-1099:2005 specifies the application module for Independent property definition. The following are within the scope of ISO/TS 10303-1099:2005: an observable or measurable quantity; the physical quantity space that contains... | |
| ISO/TS 10303-1099:2005 specifies the application module for Independent property definition. The following are within the scope of ISO/TS 10303-1099:2005: an observable or measurable quantity; NOTE 1 This concept is called... | |
| ISO/TS 10303-1101:2005 specifies the application module for Product property feature definition. The following are within the scope of ISO/TS 10303-1101:2005: specification of the use of a characterized object as a... | |
| ISO/TS 10303-1102:2005 specifies the application module for Assembly feature definition. The following are within the scope of ISO/TS 10303-1102:2005: specification of the use of a characterized object as an assembly... | |
| ISO/TS 10303-1103:2010-03 specifies the application module for Product class. The following are within the scope of ISO/TS 10303-1103:2010-03: identification, as a product class, of a set of similar products to... | |
| ISO/TS 10303-1104:2008 specifies the application module for Specified product. The following are within the scope of ISO/TS 10303-1104:2008: identification of a particular member of a product class; identification of the... | |
| ISO/TS 10303-1105:2004 specifies the application module for Multi linguism. The following are within the scope of ISO/TS 10303-1105:2004: identification of a language; identification of the language in which a text... | |
| ISO/TS 10303-1106:2008 specifies the application module for Extended measure representation. The following are within the scope of ISO/TS 10303-1106:2008: range of measure values defined by a couple of values or... | |
| ISO/TS 10303-1108:2005 specifies the application module for Specification based configuration. The following are within the scope of ISO/TS 10303-1108:2005: characterization of a use case of product or process data with... | |
| ISO/TS 10303-1109:2008 specifies the application module for Alternative solution. The following are within the scope of ISO/TS 10303-1109:2008: identification of a solution responding to a functional or organic requirement; identification... | |
| ISO/TS 10303-1110:2010-03 specifies the application module for Surface conditions. The following are within the scope of ISO/TS 10303-1110:2010-03: Coating layer; Contact_ratio; Hardness; Association of a Surface condition with a shape; | |
| ISO/TS 10303-1111:2008 specifies the application module for Classification with attributes. The following are within the scope of ISO/TS 10303-1111:2008: assignment of classification information to product or activity data; definition of... | |
| ISO/TS 10303-1112:2010-03 specifies the application module for Specification control. The following are within the scope of ISO/TS 10303-1112:2010-03: product classes used to identify sets of similar products to be offered... | |
| ISO/TS 10303-1113:2006 specifies the application module for Group. The following are within the scope of ISO/TS 10303-1113:2006: identification of a group; identification of the members of a group and of... | |
| ISO/TS 10303-1114:2004 specifies the application module for Classification assignment. The following are within the scope of ISO/TS 10303-1114:2004: assignment of classification information to product or activity data. | |
| ISO/TS 10303-1115:2010-07 specifies the application module for Part collection. The following are within the scope of ISO/TS 10303-1115:2010-07: collection of parts to be mounted in the same product, without being... | |
| ISO/TS 10303-1116:2010-03 specifies the application module for Pdm material aspects. The following are within the scope of ISO/TS 10303-1116:2010-03: identification of the material of a product; identification of product properties... | |
| ISO/TS 10303-1118:2004 specifies the application module Measure representation. The following are within the scope of ISO/TS 10303-1118:2004: specification of a kind of representation suitable for the numerical representation of properties; | |
| ISO/TS 10303-1121:2010-03 specifies the application module for Document and version identification. The following are within the scope of ISO/TS 10303-1121:2010-03: identification of a document; identification of a version of a... | |
| ISO/TS 10303-1122:2011-10 specifies the application module for Document assignment. The following are within the scope of ISO/TS 10303-1122:2011-10: assignment of documents to product or activity data; assignment of parts or... | |
| ISO/TS 24857:2006 gives the results of a study to determine the feasibility of the DiaTest-SI single particle strength tester as a system for measuring the compressive strength of synthetic industrial... | |
| Lays down capacities and related diameters for vent-hole cans in common usage for milk and milk products. All can measurements in this Technical Report are given in accordance with the... | |
| Lays down the information necessary in order to determine the most suitable material for a particular purpose. The cylindrical cores are usually made of metal in a wide variety of... | |
| Measurement of fluid flow in closed conduits -- Guidelines on the effects of flow pulsations on flow-measurement instruments | |
| Measurement of liquid flow in open channels -- Determination of the wetline correction | |
| Measurement of liquid flow in open channels -- General guidelines for selection of method | |
| Medical devices -- Guidance on the application of ISO 14971 | |
| Metallic materials -- Strain analysis report | |
| Numerical control of machines -- Operational command and data format | |
| Office furniture -- Office work chairs -- Methods for the determination of dimensions | |
| Petroleum and natural gas industries -- Classification and conformity assessment of products, processes and services | |
| Plain bearings -- Terms, definitions, classification and symbols -- Part 6: Abbreviated terms | |
| Plastics -- Smoke generation -- Part 3: Determination of optical density by a dynamic-flow method | |
| Plastics pipes and fittings -- Definitions of types of test | |
| Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination | |
| Provides a curve of the risk of AIS >= 3 thoracic injury as a function of hybrid III sternal deflection for shoulder belt loading. This curve can be used to... | |
| Provides guidelines for discharge measurements (especially for site selection) in meandering and braided rivers, and from bridges, following the provisions of ISO 748. | |
| Reaction-to-fire tests -- Full-scale room tests for surface products -- Part 2: Technical background and guidance | |
| Refers to the available international standard method(s) for the determination of required element(s) in steel and iron. States the field of application, the method of determination (principle), and the precision... | |
| Relates to the marking of escape routes on board of ferries, passenger ships cargo ships etc.. Signs and posters which are used as marking are classified into categories in terms... | |
| Replaces the first formula in subclause 5.5. | |
| Road vehicles -- Anthropomorphic side impact dummy -- Lateral impact response requirements to assess the biofidelity of the dummy | |
| Road vehicles -- Development guidelines for vehicle based software | |
| Road vehicles -- Objective rating metrics for dynamic systems | |
| Road vehicles -- Pedestrian protection -- Targets for the assessment of the biofidelity of pedestrian-leg test devices | |
| Road vehicles -- Test procedures for evaluating child restraint system interactions with deploying air bags | |
| Series 1 freight containers -- Handling and securing -- Rationale for ISO 3874 Annex A | |
| Ships and marine technology -- Vocabulary of general terms | |
| Sintered metal materials, excluding hardmetals -- Metallographic preparation and examination | |
| Solar energy -- Field pyranometers -- Recommended practice for use | |
| Specification of four prepared test methods for performance and long-time tests and discussion of the available results and their significance and comparability: box loading test (BLT), water cycling test (WCT),... | |
| Specifies a photometric method for the determination of the titanium content (annex A), a gravimetric method for the determination of tantalum contents greater than 1 % (m/m) (annex B) and... | |
| Specifies details for types of threads and thread sizes. Tabulates nominal diameters from 9,73 mm up to and including 30 mm together with the corresponding pitches and designations, refers to... | |
| Specifies the fabrics and test procedures of fabrics for liferafts. Table 1 gives performance criteria. Annex A (tests for coated materials) is for information only. | |
| Specifies the requirements for one type of textile reinforced hose for use with air and water having a design working pressure from 0.7 to 1.4 MPa, dependent upon the bore... | |
| Specifies the requirements to be followed in the choice of position of the anchorages for seat belts for front and rear seats, the force that the anchorages must be able... | |
| Specifies the types and general technical requirements for coupling head for hose couplings designed for firefighting and used for deck washing on vessels operating in inland waterways. | |
| Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests | |
| Summary of average stress rupture properties of wrought steels for boilers and pressure vessels | |
| Supplies information on the state-of-the-art of test equipment operating principles. Additional information is provided that describes the applications of current test equipment technology to ISO 9283. | |
| Surface chemical analysis -- Depth profiling -- Measurement of sputtered depth | |
| TC 106 Dentistry // SC 3 | |
| TC 159 Ergonomics // SC 3 | |
| TC 46 Information and documentation // SC 11 | |
| TC 69 Applications of statistical methods // SC 7 | |
| Technical aspects of nut design | |
| Technical product documentation -- Metadata for construction documentation | |
| Technical product documentation -- Organization and naming of layers for CAD -- Part 3: Application of ISO 13567-1 and ISO 13567-2 | |
| Textiles -- Industrial laundering procedures for textile rental and industrial laundering | |
| The aim is to give examples for the guarding of nip points between the chains and the sprocket wheels or caterpillar drives for all conveyors and elevators using chains as... | |
| The aim of ISO/TR 22694:2008 is to establish a technical basis for developing quantitative, allowable flaw sizes and for setting acceptance/rejection limits for cylinders at the time of periodic inspection... | |
| The classification is intended to provide a clear and logical designation of the structural chemical groups of a surface active agent, in the form of a decimal notation. Its aim... | |
| The coulometric method for the determination of low carbon contents in steels after combustion in a current of oxygen is applicable to carbon contents between 0,005 and 0,1 %. Specifies... | |
| The focus of ISO/TR 22221:2006 is clinical databases or other computational services, hereafter referred to as a clinical data warehouse (CDW), which maintain or access clinical data for secondary use... | |
| The ISO bibliographic filing rules are an implementation of ISO 7154, reflecting the filing practices of a substantial number of national filing rules. Selects from ISO 7154 the principles that... | |
| The purpose of ISO 13570-1:2005 is to explain how you can use the International Standards on wheelchairs to select your next wheelchair. The actual standards are very technical and, at... | |
| The purpose of ISO/TR 14047:2012 is to provide examples to illustrate current practice of life cycle impact assessment according to ISO 14044:2006. These examples are only a sample of all... | |
| The purpose of ISO/TR 20824:2007 is to provide detailed information on the rationale behind the limit values and the requirements of ISO 15004-2. | |
| The purpose of ISO/TR 22312:2011 is to document the knowledge accumulated in the six month study period conducted by ISO/TC 223/Ad hoc group 1 (AHG1), in which AHG1 examined the... | |
| The purpose of ISO/TR 28980:2007 is to explain the changes relating to power measurements in the revised editions of ISO 8980-1 and ISO 8980-2. In order to illustrate the issues... | |
| The report specifies the extent of mass reduction beyond which the error in the representativity can no longer be ignored. | |
| The scope of ISO/TR 26999:2012 is the use of the so-called process-oriented method (POM) in International Standards, Technical Specifications, Technical Reports and related documents. The Technical Report discusses the use... | |
| The test specified in ISO 22899-1 is designed to give an indication of how passive fire protection materials will perform in a jet fire. ISO/TR 22899-2:2013 provides: background information on... | |
| The values for the commercial allowances and commercial moisture regains, which are arbitrary figures to be formally agreed between the interested parties, are only applicable for this purpose, and when... | |
| This part of ISO/TR 8281 establishes empirical equations for relating the flat dimensions of paper sacks to their capacity. The experimental methods used are also described. A voluminous annex delivers... | |
| This report deals with systems based on hydraulic devices using only the energy that can be obtained from the water in the irrigation system; it gives main definitions and a... | |
| This report describes a method for the determination of the longitudinal moduls of elasticity of plastics by means of Savarts pendulum. The method is applicable to products for which the... | |
| This Technical Report consists of three sections describing the visual method, the instrumental method, and the relation between instrumental and visual methods. The instrumental method also applies to small colour... | |
| This Technical Report constitutes an attempt to explain the numerical results of a statistical examination in the simplest possible way and to show how statistical results can be used in... | |
| This Technical Report describes a method of determining the thermal conductivity of homogeneous materials or the thermal resistance of coated materials by means of the hot-plate apparatus by applying it... | |
| This Technical Report describes the different simplified short tests for the determination of the exhaust smoke emission of diesel engines of vehicles in service. Gives terms and definitions. Annex A... | |
| This Technical Report describes the heat-rating methods of spark-plugs used with spark-ignition engines. | |
| This Technical Report is a summary of best practice for those involved in geophysical borehole logging for hydrogeological purposes. It describes the factors that need to be considered and the... | |
| This Technical Report lays down the limiting values of static loads applied vertically by caravans or light trailers on ball couplings fitted to towing vehicles. Applies to caravans or light... | |
| This Technical Report sets out a recommended order for listing elements determined in steels and most other iron-based alloys, excluding foundry irons, where the priorities are different. | |
| This Technical Report specifies a method for determining transient response behaviour at approximately constant speed. It is not fully representative of real driving conditions but similar to lane change manoeuvres... | |
| This Technical Report specifies a method for determining transient response behaviour at approximately constant speed. The quasi-open-loop manoeuvre used in this method is not representative of real driving conditions but... | |
| This Technical Report specifies the characteristics, test methods and checking. Calcium silicate slabs for thermal insulation will be covered by a future international standard. The requirements relate to general appearance... | |
| This Technical Report type 3 contains the fundamental concepts and terminology for the conceptual schema, the information base, and the mechanisms involved in manipulating them. The approaches and associated languages... | |
| This Technical Report type 3 describes a methodology for determining whether a programming language processor possesses the required characteristics stated in the International Standard for the particular programming language for... | |
| Transport information and control systems -- Reference model architecture(s) for the TICS sector -- Part 2: Core TICS reference architecture | |
| Transport information and control systems -- Reference model architecture(s) for the TICS sector -- Part 3: Example elaboration | |
| Transport information and control systems -- Reference model architecture(s) for the TICS sector -- Part 4: Reference model tutorial | |
| Unalloyed steel -- Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) | |
| Unalloyed steel -- Determination of low carbon content -- Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) | |
| Unified format for the designation of metals | |
| Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying | |
| Viscosity of water | |
| Water quality -- Guidance on validation of microbiological methods |
| << Prev | Next >> |