IEEE - Institute of Electrical and Electronics Engineers, Inc. Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| " The media access control characteristics for the Carrier Sense Multiple Access with Collision De-tection (CSMA/CD) access method for shared medium local area networks are described. The control charac-teristics for... | |
| (IEC 62531 Ed. 1 (2007-11) (IEEE Std 1850-2005). The IEEE Property Specification Language (PSL) is defined in this standard. PSL is a formal notation for specification of electronic system behavior,... | |
| A cryptographic key management model and a key management OSI Basic Reference Model Application Layer protocol are specified. | |
| A family of commercially feasible ways for new systems to perform binary floating-point arithmetic is defined. This standard specifies basic and extended floating-point number formats; add, subtract, multiply, divide, square... | |
| A general-purpose microcomputer system bus is defined, and the device-independent electrical and functional interface requirements that a module shall meet in order to interconnect and communicate unambiguously by way of... | |
| A guide is presented for the preparation of a specification and test procedure for an inertial angular sensor that provides a common meeting ground of terminolgy and practice for manufacturers... | |
| A high order language for testing is defined. This language is designed to describe tests in terms that are independent of any specific test system, and has been constrained to... | |
| A list of graphic symbols for the designation of electrical, electronic, and pole line devices for layout drawings of cable television (CATV) systems is provided. This standard does not use... | |
| A mechanical and electrical specification for implementing a common interoperable mechanical quick-disconnect interconnect system for use by industry for interfacing large numbers of electrical signals (digital, analog, RF, power, etc.)... | |
| A mechanism for prioritization of management frames is provided and a protocol to communicate management frame prioritization policy is specified in this amendment. | |
| A message exchange framework based on information elements as a transport method for key management protocol (KMP) datagrams and guidelines for the use of some existing KMPs with IEEE Std... | |
| A method for incorporating more than one source of control into a CAMAC crate is defined. The aim is to provide for the use of auxiliary controllers in order to... | |
| A method of calculating the current-temperature relationship of bare overhead lines, given the weather conditions, is presented. Along with a mathematical method, sources of the values to be used in... | |
| A PHY and a MAC layer for short-range optical wireless communications using visible light in optically transparent media are defined. The visible light spectrum extends from 380 nm to 780... | |
| A physical (PHY) layer enabling the use of the 865 MHz to 867 MHz band in India is defined in this amendment. The supported data rate should be at least... | |
| A physical layer (PHY) and medium access control (MAC) sublayer for short-range optical wireless communications (OWC) in optically transparent media using light wavelengths from 10 000 nm to 190 nm... | |
| A Secure Device Identifier (DevID) is cryptographically bound to a device and supports authentication of the device’s identity. An Initial Device Identifier (IDevID) provide by the supplier of a device... | |
| A secure device identifier (DevID) is cryptographically bound to a device and supports authentication of the device’s identity. Locally significant identities can be securely associated with an initial manufacturer-provisi oned... | |
| A security label option that can be used to implement rule-based access controls for the protection of IEEE 802 local area networks (LANs) and metropolitan area networks (MANs) is defined. | |
| A security protocol that can be used to protect IEEE 802 Local Area Networks (LANs) and Metropolitan Area Networks (MANs) is described. This Open Systems Interconnection (OSI) Layer 2 security... | |
| A service provider's use of the architecture and protocols of IEEE 802.17 to support ring interconnection through dual station homing, providing 50 ms protection, loop prevention, and load balancing of... | |
| A simplified method of calculating the current-temperature relationship of bare overhead lines, given the weather conditions, is presented. Along with a mathematical method, sources of the values to be used... | |
| A standard XML format for representing electronic design intellectual property (IP)quality information, based on an information model for IP quality measurement, is defined. Itincludes a schema and the terms that... | |
| A test procedure for the evaluation of the impulse voltage capability of insulation systems of form-wound ac rotating electrical machinery is outlined. The procedure is primarily directed toward providing a... | |
| A wide variety of block transfer algorithms (or modes) are possible in CAMAC systems. However, a restricted number of such algorithms can satisfy nearly all needs. This document presents recommended... | |
| A YANG data model in support of configuration and operational status information for a subset of Bridging capabilities is provided in this amendment to IEEE Std 802.1Q™-2018. (The PDF of... | |
| Abstract: Seismic design recommendations for substations, including qualification of each equipment type, are discussed. Design recommendations consist of seismic criteria, qualification methods and levels, structural capacities, performance requirements for equipment... | |
| Additional computer specific requirements to supplement the criteria and requirements of IEEE Std 603-1991 are specified. Within the context of this standard, the term computer is a system that includes... | |
| Additional computer specific requirements to supplement the criteria and requirements of IEEE Std 603-1998 are specified. Within the context of this standard, the term computer is a system that includes... | |
| Additional computer specific requirements to supplement the criteria and requirements of IEEE Std 603-2009 are specified. Within the context of this standard, the term computer is a system that includes... | |
| Additional IEEE 802(R) media access independent mechanisms that optimize handovers between possibly heterogeneous IEEE 802 systems and between IEEE 802 systems and cellular systems to enable improved handover performance for... | |
| Additional specific requirements to supplement the criteria and requirements of IEEE Std 603(TM) are specified for programmable digital devices. Within the context of this standard, the term programmable digital device... | |
| Adoption of IEEE Std 1641-2010. This standard provides the means to define and describe signals used in testing. It also provides a set of common basic signals, built upon formal... | |
| Adoption of IEEE Std 1650-2005. Recommended methods and standardized reporting practices for electrical characterization of carbon nanotubes (CNTs) are covered. Due to the nature of CNTs, significant measurement errors can... | |
| AI-ESTATE is a set of specifications for data interchange and for standard services for the test and diagnostic environment. The purpose of AI-ESTATE is to standardize interfaces between functional elements... | |
| Aircraft Direct-Current Apparatus Voltage Ratings | |
| Alternate physical layer (PHY) and necessary medium access control layer (MAC) enhancements to IEEE Std 802.22-2011 are specified in this amendment for operation in very high frequency/ultra-high frequency (VHF/UHF) television... | |
| Amendment #1 to IEEE Std 802.1D-2004 The scope of this project is limited to amending 802.1D-2004 to support Bridging of IEEE Std 802.17 MACs. This involves: Adding one subclause to... | |
| Amendment to IEEE Std 802.11(TM)-2012. This amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) for robust audio video (AV) streaming, while maintaining coexistence with other types of... | |
| Amendment to IEEE Std 802.21-2008. Extensions to IEEE Std 802.21(TM)-2008 for handovers with downlink only technologies is discussed in the amendment. | |
| Amendment to IEEE Std 802.21-2008. Extensions to IEEE Std 802.21-2008 are provided for security mechanisms to protect media independent handover services and mechanisms to use MIH to assist proactive authentication... | |
| Amendment to IEEE Std 802.3-2005 This amendment to IEEE Std 802.3-2005 specifies a new PMD, 10GBASE-LRM, for serial, 10 Gb/s operation over up to 220 m of 62.5 µm and... | |
| An access network (which connects terminals to their access routers) utilizing technologies based on the family of IEEE 802(R) standards is specified in this recommended practice. An access network reference... | |
| An alternative physical layer (PHY) and a modified medium access control (MAC) layeris defined in this amendment.Two PHY modes have been defined that enable data rates up to 100 Gb/s... | |
| An architectural description of the functions and location of standard for interoperable LAN/MAN security (SILS) components is provided. The SILS components and their relationships to applications, communications protocols, system management,... | |
| An extensible IEEE 802(R) media access independent services framework (i.e., function and protocol) is defined that enables the optimization of services including handover and other services when performed between heterogeneous... | |
| An optical interface for use between teleprotection and digital multiplexer equipment that can operate at a data rate of N times 64 kilobit per second where N = 1, 212... | |
| ANSI/IEEE Std 716-1985, Standard C/ATLAS, is an editorial revision and consolidation of C/ATLAS Test Language and C/ATLAS Syntax. C/ATLAS is a programming/programm able language which is a subset of IEEE... | |
| Approaches to good Software Quality Assurance practices in support of IEEE Std 730-1989, IEEE Standard for Software Quality Assurance Plans, are identified. These practices are directed toward the development and... | |
| Basic principles for design qualification of safety systems equipment used in nuclear power generating stations are provided. Specification criteria, the development of a qualification program, and documentation are addressed. All... | |
| Changes and additions are provided for IEEE Std 802.11b-1999 to support the higher rate Physical Layer for operation in the 2.4 GHz band. | |
| Changes and additions to IEEE standard 802.3, 1998 edition, to support virtual bridged local area networks (VLANs) as specified in IEEE P802.1Q. draft standard for local and metropolitan area networks:... | |
| Changes and additions to IEEE Std 802.11, 1999 Edition, as amended by IEEE Stds 802.11a-1999, 802.11b-1999, 802.11b-1999/Cor 1-2001, and 802.11d-2001, are provided to support the further higher data rate extension... | |
| Changes and additions to IEEE Std. 802.11-1999 are provided to support the new highrate physical layer (PHY) for operation in the 5 GHz band. | |
| Conformance to IEEE Std 802.16-2001 as amended by IEEE Std 802.16a-2003 and IEEE Std 802.16c-2002) Abstract: This standard represents the Test Suite Structure and Test Purposes (TSS&TP), per ISO/IEC 9646-1:1994... | |
| Conformance to IEEE Std 802.16-2004 This amendment updates and expands IEEE Std 802.16-2004 to allow for mobile subscriber stations. | |
| Correction of technical and editorial errors identified by the IEEE 802.1 maintenance activity are presented in this document. | |
| Corrections to Equation 16, and Equation 18 through Equation 20 are addressed in this corrigendum. | |
| Corrigendum to IEEE Std 802.3-2005. This corrigendum will correct Equation 55-55. It has been incorporated into the second printing of IEEE Std 802.3an-2006. | |
| Criteria for the design of an integrated security system for nuclear power generating stations are provided in this standard. Requirements are included for the overall system, interfaces, subsystems, and individual... | |
| Criteria for the minimum requirements in the selection design, installation, and qualifica-tion of raceway systems for Class 1E circuits for nuclear power generating stations is provided. Italso prescribes methods for... | |
| Criteria for the minimum requirements in the selection design, installation, and qualification of raceway systems for Class 1E circuits for nuclear power generating stations are provided in this standard. Methods... | |
| Criteria for the minimum requirements in the selection, design, installation, and qualification of raceway systems for Class 1E circuits for nuclear power generating stations are provided. Methods for the structural... | |
| Criteria that establish protection requirements for Class 1E power systems and equipment are prescribed. The purpose of and the means for obtaining protection from electrical and mechanical damage or failures... | |
| Data interchange and standard software services for test and diagnostic environmentsare defined by Artificial Intelligence Exchange and Service Tie to All Test Environments (AIESTATE).The purpose of AI-ESTATE is to standardize... | |
| Definitions for the purpose of promoting clarity and consistency in the use of radar termi- nology are provided. The definitions represent the consensus of a panel of radar experts. | |
| Definitions for the purpose of promoting clarity and consistency in the use of radar terminology are provided. The definitions represent the consensus of a panel of radar experts. | |
| Definitions of Inertial Navigation Terms | |
| Definitions of MAC related functions to enable spectrum resource management are addressed in this amendment to IEEE Std 802.15.4™. It specifies the following: — Spectrum resource measurements and network performance... | |
| Detailed procedures are provided for reclaiming used mineral insulating oils (transformer oils) by chemical and mechanical means to make them suitable for reuse as insulating fluids. Reclamation procedures are described,... | |
| Diagnostic tests and measurements that are performed in the field on oil-immersed power transformers and regulators are described. Whenever possible, shunt reactors are treated in a similar manner to transformers. | |
| Direction for the design and installation of safety related electrical cable systems, including associated circuits, in nuclear power generating stations is provided. Guidance for the design and installation of those... | |
| Direction for the design and installation of safety-related electrical cable systems, including associated circuits, in nuclear power generating stations is provided. Existing standards are identified and guidance is provided for... | |
| Engineering practices for the installation and deployment of IEEE 802.22 systems are discussed in this recommended practice. (The PDF of this standard is available at no cost compliments of the... | |
| Enhancements to the configuration of time-sensitive streams are provided by this amendment to IEEE Std 802.1Q-2018. (The PDF of this standard is available to you at no cost, compliments of... | |
| Enhancements to the forwarding process that support frame preemption are provided in this amendment to IEEE Std 802.1Q-2014. | |
| Enhancements to the forwarding process that support per-stream filtering and policing are provided in this amendment to IEEE Std 802.1Q-2014. | |
| Enhancements to the forwarding process that supports scheduled traffic is provided in this amendment to IEEE Std 802.1Q---. (The PDF of this standard is available at no cost compliments of... | |
| Enhancements to the forwarding process that supports scheduled traffic is provided in this amendment to IEEE Std 802.1Q-2014. (The PDF of this standard is available at no cost compliments of... | |
| Enhancements to the forwarding process that supports scheduled traffic is provided in this amendment to IEEE Std 802.1Q-2014. Additional downloads are attached or can be downloaded at http://standards.iee e.org/downloads/802. 1/index.html)... | |
| Enhancements to the IEEE 802.11 physical layers (PHYs) and medium access control (MAC) sublayer to support operation in the white spaces in television bands are defined. | |
| Enhancements to the IEEE 802.15.4(TM) smart utility network (SUN) orthogonal frequency division multiplexing (OFDM) physical layers (PHYs) that enable support for data rates up to 2.4 Mb/s are defined by... | |
| Enhancements to the set of TLVs used by the Data Center Bridging eXchange protocol (DCBX) for the purpose of simplifying the management of networks utilizing Data Center Bridging (DCB) features... | |
| Enhancements to the Wireless MAN-Advanced Air Interface, an air interface designated as "IMT-Advanced" by the International Telecommunication Union--Radio communication Sector(ITU-R), are specified in this standard. Improved support for machine-to-machine applications... | |
| Enhancements to the Wireless MAN-OFDMA Air Interface, an air interface designated as "IMT-2000" by the International Telecommunication Union-Radio communication Sector (ITU-R), are specified by this amendment. The enhancements provide improved... | |
| Enhancements to the WirelessMAN-Advanced Air Interface to support high-reliability networks are specified in this amendment to IEEE Std 802.16.1-2012. (The PDF of this standard is available at no cost compliments... | |
| Enhancements to the WirelessMAN-OFDMA air interface to support higher reliability networks are specified in this amendment to IEEE Std 802.16-2012. | |
| Errors, inconsistencies, and ambiguities in IEEE Std 802.15.4™-2015 are corrected in this corrigendum. | |
| Ethernet Data Encryption devices (EDEs) are specified in this amendment. An EDE is a two-port bridge that uses MACsec to provide secure connectivity for attached customer bridges, or for attached... | |
| Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control (MAC) specification and management information base... | |
| Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control (MAC) specification, management information base (MIB),... | |
| Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base... | |
| Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 400 Gb/s using a common media access control (MAC) specification and management information base... | |
| Explicit path control, bandwidth reservation, and redundancy (protection, restoration) for data flows are specified in this amendment to IEEE Std 802.1Q---. (The PDF of this standard is available at no... | |
| Explicit path control, bandwidth reservation, and redundancy (protection, restoration) for data flows are specified in this amendment to IEEE Std 802.1Q-2014. | |
| Extend the RF channelization of the millimeter wave PHY to allow for use of the spectrum up to 71 GHz. | |
| Extensions to the behavior of ISO/IEC 10038 (IEEE 802.ID) media access control (MAC) bridges, in order to facilitate interoperability in bridged local area networks (LANs) comprising CSMA/CD networks interconnected with... | |
| Extensions to the Virtual Station Interface (VSI) Discovery and Configuration Protocol (VDP) to support using the protocol between an end station and a device doing encapsulation/decaps ulation for Network Virtualization... | |
| Foundations for transmission structures are subjected to unique loading conditions in which a high portion of the load is transitory and involves high uplift forces or high overturning moments with... | |
| Grounding practices that have generally been accepted by the electric utility industry as contributing to effective grounding systems for personnel safety and equipment protection in generating stations are identiÞed. A... | |
| Grounding practices that have generally been accepted by the electric utility industry as contributing to effective grounding systems for personnel safety and equipment protection in generating stations are identified. A... | |
| Guidance on basic qualification principles and appropriate methods of demonstrating the qualification of equipment used in nuclear facilities is provided in this standard. The principles, methods, and procedures described are... | |
| Guidelines and criteria for the design of substations that can withstand the effects of earthquakes are provided. These recommendations comprise an up-to-date summary of aseismic design practices that will be... | |
| Guidelines for evaluating electrical insulation materials that are subjected to more than one significant aging stress are provided. The focus is on materials or equipment intended for use in nuclear... | |
| Guidelines under which data sheets for new semiconductor memories are to be generated are provided. Adherence to these guidelines is intended to produce data sheets that are concise and that... | |
| How all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by IEEE 802® LANs to communicate is specified in... | |
| IEC/IEEE 62582-1:2011 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. | |
| IEC/IEEE 62582-2:2011 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using the indenter modulus technique in the detail necessary to produce accurate and... | |
| IEC/IEEE 62582-4:2011 specifies methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using oxidation induction techniques in the detail necessary to produce accurate and reproducible... | |
| IEC/ISO/IEEE 80005-1-2012 describes high voltage shore connection (HVSC) systems, on board the ship and on shore, to supply the ship with electrical power from shore. This standard is applicable to... | |
| IEEE standard 802.10 provides specifications for an interoperable data link layer security protocol and associated security services. The secure data exchange (SDE) protocol is supported by an application layer key... | |
| IEEE Standard | |
| IEEE Std 671-1985 provides specifications and test requirements for a non-gyroscopic inertial angular sensor that may measure angular jerk, acceleration, rate, or displacement with or without response down to zero... | |
| IEEE Std 716-1989 defines IEEE Common ATLAS (C/ATLAS), a high-order language for testing on Automatic Test Equipment (ATE). C/ATLAS is a widely acceptable programming language. Its single and unique construct... | |
| IEEE Std 802-2001, IEEE Standards for Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 Standards. It defines compliance with the family... | |
| IEEE Std 802.11h-2003 Part 11: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications: Amendment 5: Spectrum and Transmit Power Management Extensions in the 5 GHz band in Europe... | |
| IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN). | |
| IEEE Std 802.15.4-2011 is amended by this standard. The intention of this amendment is to enhance and add functionality to the IEEE 802.15.4 MAC to (a) better support the industrial... | |
| IEEE Std 802.1D-2004, IEEE Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Bridges. The PDF of this standard is available at no charge compliments of the IEEE... | |
| In this amendment to IEEE Std 802.15.4(TM)-2011, outdoor low-data-rate, wireless, television white space (TVWS) network requirements are addressed. Alternate physical layers (PHYs) are defined as well as only the medium... | |
| In this amendment to IEEE Std 802.15.4-2011, outdoor low-data-rate, wireless, smart metering utility network requirements are addressed. Alternate PHYs are defined as well as only those MAC modifications needed to... | |
| In this amendment to IEEE Std 802.15.4TM-2011, a physical layer for IEEE 802.15.4 in the 2360 MHz to 2400 MHz band which complies with Federal Communications Commission (FCC) MBAN rules... | |
| In this first edition of IEC/IEEE 65700-19-03, service experiences as well as established marketrequirements have been harmonized with existing IEC and IEEE standards | |
| In this IEEE guide, grounding practices that have generally been accepted by the electric utility industry as contributing to effective grounding systems for personnel safety and equipment protection in generating... | |
| In this IEEE standard thermal limit curves for induction machines are defined. A procedure is established for the presentation of these curves, and guidance for the interpretation and use of... | |
| In this IEEE Standard uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC) overhead power lines and for the calibration of the meters... | |
| In this IEEE Standard, criteria that establish protection requirements for Class 1E power systems and equipment are prescribed. The purpose of and the means for obtaining protection from electrical and... | |
| Incoporating IEEE Std 802.3, 1998 Edition, IEEE Std 802.3ac-1998, IEEE Std 802.3ab-1999, and IEEE Std 802.3ad-2000. Superseded by 802.3-2002 (802.3ag). The media access control characteristics for the Carrier Sense Multiple... | |
| Incorporated in IEEE Std 802.3, 2000 Edition. Superseded by 802.3-2002. An optional Link Aggregation sublayer for use with CSMA/CD MACs is defined. Link Aggregation allows one or more links to... | |
| Information to assist in determining the electrical parameters of communication and control cables necessary to improve the overall reliability of these cables when used in high-voltage environments is the objective... | |
| It is the purpose of this code to define uniform acceptable methods of making tests to determine that the performance and other characteristics of DC rotating machines for aircraft comply... | |
| It is the purpose of this code to define uniform acceptable methods of making tests to determine that the rating, performance and other characteristics of generator voltage regulators for aircraft... | |
| IThe VITAL (VHDL Initiative Towards ASIC Libraries) ASIC Modeling Specification is defined in this standard. This modeling specification defines a methodology which promotes the development of highly accurate, efficient simulation... | |
| Link Aggregation allows one or more links to be aggregated together to form a Link Aggregation Group, such that a Media Access Control (MAC) Client can treat the Link Aggregation... | |
| MAC-independent Link Aggregation capability and general information relevant to specific MAC types are defined in this standard. Link Aggregation allows parallel full-duplex point-to-point links to be used as if they... | |
| MAC/PHY protocol enhancements for cooperation among base stations in multi-tier networks to enhance interference mitigation, mobility management, and base station power management are specified in this amendment. Enhanced base stations... | |
| Managed object classes and their components that permit remote management of ISO/IEC 10038-conformant MAC bridges by means of suitable management protocols, including the services and protocols defined in ISO/IEC 15802-2:... | |
| Mechanisms that provide IEEE Std 802.11 networks with fast initial link setup methods that do not degrade the security offered by Robust Security Network Association (RSNA) already defined in IEEE... | |
| Mechanisms to enable multicast group management for MIH services is specified in this standard. The specification defines management primitives and messages that enable a user to join, leave or update... | |
| Media Access Control security (MACsec) Key Agreement protocol (MKA) data elements and procedures that provide additional security and manageability capabilities, including the ability to maintain secure communication while the operation... | |
| Methods for communicating devices in a Personal Area Network. | |
| Methods for qualifying static battery chargers and inverters for Class 1E installations outside containment in nuclear power generating stations are described. These methods may also be used to qualify similar... | |
| Modifications to both the IEEE 802.11(TM) physical layer (PHY) and the medium access control (MAC) sublayer to enable operation of license-exempt IEEE 802.11 wireless networks in frequency bands below 1... | |
| Modifications to IEEE Std 802.11™-2016, above the physical layer (PHY), to enable delivery of preassociation service discovery information to IEEE 802.11 stations (STAs) are defined in this amendment., above the... | |
| Outdoor AC substations, either conventional or gas-insulated, are covered in this guide. Distribution, transmission, and generating plant substations are also included. With proper caution, the methods described herein are also... | |
| Outdoor ac substations, either conventional or gas-insulated, are covered in this guide. Distribution, transmission, and generating plant substations are also included. With proper caution,the methods described herein are also applicable... | |
| Performance requirements for test equipment that measures the analog transmission parameters of subscriber loops, message trunks, PBX trunks, and ties lines are specified. Requirements for these measurements with DS1 bit... | |
| Physical layer (PHY) and medium access control (MAC) mechanisms are defined in this standard for wireless personal area networks (WPANs) peer aware communications (PAC) optimized for peer-to-peer and infrastructure-less communications... | |
| Port-based network access control allows a network administrator to restrict the use of IEEE 802 LAN service access points (ports) to secure communication between authenticated and authorized devices. This standard... | |
| Practices for improving electrical maintenance and safety in the cement industry are defined and recommended. These practices apply to all electrical equipment commonly used in cement plants, such as substations,... | |
| Preparation of material incorporated in this report has been undertaken by the AIEE. in the belief that it will materially aid in the realization of a better aircraft electric system. | |
| Prescribes criteria that establish protection requirements for Class 1E power systems and equipment. It describes the purpose of and the means for obtaining protection from electrical and mechanical damage, or... | |
| Procedures for demonstrating the adequacy of new Class 1E transformers, located in a mild environment of a nuclear power generating station, to perform their required safety functions under postulated service... | |
| Procedures for demonstrating the adequacy of new Class 1E transformers, located in amild environment of a nuclear power generating station, to perform their required safety functionsunder postulated service conditions are... | |
| Profiles that select features, options, configurations, defaults, protocols and procedures of bridges, stations and LANs that are necessary to build networks that are capable of transporting time-sensitive audio and/or video... | |
| Protocols, procedures, and managed objects to allow IEEE 802.11 media to provide internal connections within bridged networks, as well as access to bridged networks, are provided in this amendment. | |
| Protocols, procedures, and managed objects to enhance the ability of IEEE 802.11™ media to provide transit links internal to IEEE 802.1Q™ bridged networks are specified in this amendment to IEEE... | |
| Radio technology independent methods for coexistence among dissimilar television band devices (TVBDs) and dissimilar or independently operated networks of TVBDs are specified in this standard. | |
| Reaffirmed 2005 Diagnostic tests and measurements that are performed in the field on oil-immersed power transformers and regulators are described. Whenever possible, shunt reactors are treated in a similar manner... | |
| Reaffirmed September 22, 2005 Criteria are provided for the design of an integrated security system for nuclear power generating stations. Requirements are included for the overall system, interfaces, subsystems, and... | |
| Recommended methods and standardized reporting practices for electrical characterization of printed and organic transistors are covered. Due to the nature of printed and organic electronics, significant measurement errors can be... | |
| Recommended methods and standardized reporting practices for electricalcharacteri zation of printed and organic ring oscillators are covered. Due to the nature of printedand organic circuits, significant measurement errors can be... | |
| Recommended practices for designing and installing electric pipe heating control and alarm systems, as applied to mechanical piping systems that require heat, are provided. The recommendations include selection of control... | |
| Recommended practices for designing, installing, and maintaining electric heat tracing systems are provided. These electric heat tracing systems are applied, both for critical process temperature control and for process temperature... | |
| Replaced IEEE Std 1500-2005. This standard defines a mechanism for the test of core designs within a system on chip(SoC). This mechanism constitutes a hardware architecture and leverages the core... | |
| Replaces IEEE Std 1232-2002 / Dual logo standard AI-ESTATE is a set of specifications for data interchange and for standard services for the test and diagnostic environment. The purpose of... | |
| Report on Aircraft D-C Apparatus Voltage Ratings | |
| Requirements for initiating, planning, controlling, and executing the Software Quality Assurance processes of a software development or maintenance project are established in this standard. This standard is harmonized with the... | |
| Revised by IEEE Std 765-2006 The design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and alternate ac (AAC)... | |
| Revision of IEEE Std 686-1997. This standard is devoted to providing radar definitions. The standard includes terms formerly found in IEEE std 172-1971, IEEE Standard Definitions of Navigation Aid Terms,... | |
| Revision of IEEE Std 741-1997. This standard prescribes criteria that establish protection requirements for Class 1E power systems and equipment. It describes the purpose of and the means for obtaining... | |
| Revision of IEEE Std 802.1X-2001 Port-based network access control makes use of the physical access characteristics of IEEE 802 Local Area Networks (LAN) infrastructures in order to provide a means... | |
| Routing algorithms and relay behavior supporting equal cost multipath forwarding in shortest path bridged VLANs are specified in this amendment to IEEE Std 802.1Q. | |
| SECTION THREE: This section includes Clause 34 through Clause 43 and Annex 36A through Annex 43C. (Third printing: 22 June 2010.) | |
| Seismic design recommendations for substations, including qualification of different equipment types are discussed. Design recommendations consist of seismic criteria, qualification methods and levels, structural capacities, performance requirements for equipment operation,... | |
| Seismic design recommendations for substations, including qualification of each equipment type, are discussed. Design recommendations consist of seismic criteria, qualification methods and levels, structural capacities, performance requirements for equipment operation,... | |
| Services and protocol elements that permit the exchange of management information between stations attached to IEEE 802 local and metropolitan area networks are defined. The standard includes the specification of... | |
| Services and protocol elements that permit the exchange of management information between stations attached to ISO/IEC standard local and metropolitan area networks are defined. The standard includes the specification of... | |
| Several use cases and services are defined, namely, handover between heterogeneous networks, home energy management system, software-defined radio access networks (SDRANs), radio resource management (RRM), and device-to-device (D2D) communication service... | |
| Short-range, wireless communications in the vicinity of, or inside, a human body (but not limited to humans) are specified in this standard. It uses existing industrial scientific medical (ISM) bands... | |
| Software engineering is an emerging field. New terms are continually being generated, and new meanings are being adopted for existing terms. The Glossary of Software Engineering Terminology was undertaken to... | |
| Specification and test requirements for a single-axis ring laser gyro (RLG) for use as a sensor in attitude control systems, angular displacement measuring systems, and angular rate measuring systems are... | |
| Standard Docs | |
| Standard Test Interface Language (STIL) provides an interface between digital test generation tools and test equipment. A test description language is defined that: (a) facilitates the transfer of digital test... | |
| Standard Test Interface Language (STIL) provides an interface between digital test generation tools and test equipment. Extensions to the test interface language (contained in this standard) are defined that (1)... | |
| Standard Test Interface Language (STIL) provides an interface between digital test generationtools and test equipment. A test description language is defined that: (a) facilitates the transferof digital test vector data... | |
| Standard withdrawn 14 January 2001. Optional MAC capabilities are defined to allow direct link connection between two end nodes with provision for both half-duplex and full-duplex operation; burst-mode packet transmission... | |
| Superseded by 625-1990. Assists in the effective application of relays and other devices for the protection of shunt capacitors used in substations. It covers the protective considerations, along with recommended... | |
| Superseded by 635-2003. This standard outlines requirements and establishes design guidelines for the selection of aluminum sheaths for extra-high, high, medium-, and low-voltage cables. It establishes basic installation parameters for... | |
| Superseded by 650-1990. Methods for qualifying static battery chargers and inverters for Class 1E installations in a mild environment outside containment in nuclear power generating stations are described. The qualification... | |
| Superseded by 664-1993. The current methodologies, including apparatus, procedures, and measurement accuracies, for determining the dynamic characteristics of vibration dampers and damping systems are described. Some basic guidance is provided... | |
| Superseded by 67-1990. This standard covers general recommendations for the operation, loading, and maintenance of turbine-driven synchronous generators that have cylindrical rotors. | |
| Superseded by 802.1D-2004. This amendment to IEEE Std 802.1D, 1998 Edition is intended to documentmaintenance items identified in the text of IEEE Std 802.1D, 1998 Edition (ISO/IEC 15802-3:1998). The document... | |
| Superseded by 802.1D | |
| Superseded by IEEE 692-1997 Criteria are provided for the design of an integrated security system for nuclear power generating stations. Requirements are included for the overall system, interfaces, subsystems, and... | |
| Superseded by IEEE Std 650-2006. Methods for qualifying static battery chargers and inverters for Class 1E installations in a mild environment outside containment in nuclear power generating stations are described. | |
| Superseded by IEEE Std 67-2006 General recommendations for the operation, loading, and maintenance of turbine-driven synchronous generators having cylindrical rotors are provided. The manufacturer's and user's responsibility is discussed, and... | |
| Superseded by IEEE Std 693-2005 Recommendations for seismic design of substations, including qualification of each equipmenttype, are discussed. Design recommendations consist of seismic criteria, qualification methods and levels,structural capacities, performance... | |
| Superseded by IEEE Std 739-1995 This recommended practice serves as an engineering guide for use in electrical design for energy conservation. It provides a standard design practice to assist engineers... | |
| Superseded by IEEE Std 776-1992. The inductive environment that exists in the vicinity of electric power and wire-line telecommunications systems and the interfering effects that may be produced are addressed. | |
| Superseded by IEEE Std 802-2001 This IEEE Standards product is part of the 802 family on LAN/MAN. This document provides an overview to the family of IEEE 802 Standards, defines... | |
| Superseded by IEEE Std 802.15.4-2006 IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data communication devices using low- data-rate, low-power, and low-complexity short-range radio frequency (RF) transmissions in... | |
| Superseded by IEEE Std 802.16-2012. This amendment specifies improved mechanisms, as policies and medium access control enhancements, to enable coexistence among license-exempt systems based on IEEE Std 802.16 and to... | |
| Superseded by IEEE Std 802.16-2012.This document specifies OFDMA physical layer and medium access control layer enhancements to IEEE Std. 802.16 for licensed bands to enable the operation of relay stations. | |
| Superseded by IEEE Std 802.16.2-2004 Abstract:This IEEE recommended practice provides guidelines for minimizing interference in fixed broadband wireless access (BWA)systems operating in the frequency range 10 to 66 GHz, with... | |
| Superseded by IEEE Std 802.1D-1998 An architecture for the interconnection of IEEE 802® Local Area Networks (LANs) below the MAC Service boundary is defined. MAC Bridges, as specified by this... | |
| Superseded by IEEE Std 802.1D-2004 This IEEE Standards product is part of the 802 family on LAN/MAN. This amendment to IEEE Std 802.1D, 1998 Edition (ISO/IEC 15802-3: 1998) and IEEE... | |
| Superseded by IEEE Std 802.3-2002. This IEEE Standards product is part of the 802 Family on LAN/MAN. Abstract: Type 1000BASE-T PCS, type 1000BASE-T PMA sublayer, and type 1000BASE-T Medium Dependent... | |
| Superseded by IEEE Std 802.3-2005 IEEE Std 802.3, which addresses the CSMA/CD access method and physical layer specifications will be enhanced through necessary amendments and corrigenda. | |
| SUPERSEDED BY ISO/IEC 8802-11:1999 The medium access control and physical characteristics for wireless local area networks are specified in this standard, part of a series of standards for local and... | |
| Superseded Uniform minimum acceptable requirements for the preparation and content of Software Quality Assurance Plans (SQAPs) are provided. The standard also provides a standard against which such plans can be... | |
| Supersedes 635-1989 (R1994). IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables | |
| Supeseded by IEEE Std 802.16-2004 (Amendment to IEEE Std 802.16-2001) Abstract: This document amends IEEE Std 802.16-2001 by enhancing the medium access control layer and providing additional physical layer specifications... | |
| Support to extend the IEEE 802.3 protocol and MAC specification to an operating speedof 10 Gb/s. Several Physical Coding Sublayers known as 10GBASE-X, 10GBASE-R, and10GBASE-W are specified, as well as... | |
| SystemC is defined in this standard. SystemC is an ANSI standard C++ class library for system and hardware design for use by designers and architects who need to address complex... | |
| Technical and editorial corrections are provided by this corrigendum to IEEE Std 802.1AS.(The PDF of this standard is available at no charge. "IEEE Get Program" grants public access to view... | |
| Technical and editorial corrections are provided in this corrigendum to IEEE Std 802.1AX-2014. | |
| Technical and editorial errors identified by the IEEE 802.1 Working Group s maintenance activity are corrected in this corrigendum to IEEE Std 802.1BA-2011. | |
| Technical and editorial errors identified by the IEEE 802.1 Working Group’s maintenance activity are corrected by this corrigendum to IEEE 802.1AB(TM)-2009. | |
| Technical and editorial errors identified by the IEEE 802.1 Working Group's maintenance activity are corrected by this corrigendum. | |
| Technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANs) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions... | |
| Test procedures for X-ray spectrometers consisting of a semiconductor radiation detector assembly and signal processing electronics interfaced to a pulse-height analyzer/computer are presented. Energy resolution, spectral distortion, pulse-height linearity, counting... | |
| The basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in nuclear power generating stations are described. In addition to... | |
| The basic principles, requirements, and methods for qualifying Class 1E motor controlcenters for both harsh and mild environment applications in nuclear power generating stations aredescribed. In addition to defining specific... | |
| The carrier sense multiple access with collision detection (CSMA/CD) media access method is the means by which two or more stations share a common bus transmission medium. This is a... | |
| The concept of Media Access Control (MAC) Bridging, introduced in the 1993 edition of this standard, has been expanded to define additional capabilities in Bridged LANs aimed at providing for... | |
| The correction to the PAUSE reaction timing delay for the 10GBASE-T port type is addressed in this corrigendum to IEEE Std 802.3-2008. | |
| The current methodologies, including apparatus, procedures, and measurement accuracies, for determining the dynamic characteristics of vibration dampers and damping systems are described. Some basic guidance is provided regarding a given... | |
| The design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and alternate ac (AAC) source are described. This standard... | |
| The design of foundations for conventional transmission line structures, which include lattice towers, single or multiple shaft poles, H-frame structures, and anchors for guyed structures is presented in this guide. | |
| The format of linkable, relocatable, and absolute object modules is specified. MUFOM, the Microprocessor Universal Format for Object Modules, is designed to apply to a variety of target machines. It... | |
| The guide includes definitions, application of loads, structure application, characteristics of natural wood and laminated wood members, design stresses, fabrication of laminated wood members, connections, nonwood members, erection and framing,... | |
| The IEEE 802.11™ directional multi-gigabit (DMG) physical layer (PHY) and the medium access control (MAC) layer are modified by this amendment to IEEE Std 802.11™-2016 to enable operation in the... | |
| The IEEE Property Specification Language (PSL) is defined. PSL is a formal notation for specification of electronic system behavior, compatible with multiple electronic system design languages, including IEEE Std 1076... | |
| The IEEE Technology Report on Wake-Up Radio provides: • •An introduction to IEEE 802.11ba Wake-Up Radio • Near- and long-term use cases • Market forecasts • A comparison of Wake-Up... | |
| The IEEE Technology Report on Wake-Up Radio provides: An introduction to IEEE 802.11ba Wake-Up Radio Near- and long-term use cases Market forecasts A comparison of Wake-Up Radio to other technologies... | |
| The inductive environment that exists in the vicinity of electric power and wire-line telecommunications systems and the interfering effects that may be produced are addressed. An interface that permits either... | |
| The intent of this standard is to name a common set of instructions used by most general purpose microprocessors, to provide rules for the naming of new instructions and the... | |
| The MAC Service and the Internal Sublayer Service (ISS) are defined in this standard. This standard specifies media-dependent convergence functions that map IEEE 802(R) MAC interfaces to the ISS. The... | |
| The MAC service provided by all IEEE 802(R) MACs along with the Internal Sublayer Service (ISS) that is provided by IEEE 802 MACs to the relay function of a Media... | |
| The Management Information Base (MIB) module specifications for IEEE Std 802.3, also known as Ethernet, are contained in this standard. It includes the Structure of Management Information Version 2 (SMIv2)... | |
| The Management Information Base (MIB) module specifications for IEEE Std 802.3TM, also known as Ethernet, are contained in this standard. It includes the Structure of Management Information Version 2 (SMIv2)... | |
| The manufacturers and users of Class 1E motor control centers are required to provide assurance that such equipment will meet or exceed its specific performance requirements throughout its installed life. | |
| The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium local area networks are described. The control characteristics for full... | |
| The media access control characteristics for the Demand Priority access method are specified. The layer management, physical layers, and media that support this access method are also specified. Layer and... | |
| The media access control characteristics for the demand-priority access method are specified. The layer management, physical layers, and media that support this access method are also specified. Layer and sublayer... | |
| The Ministry of Industry and Information Technology (MIIT) of the People’s Republic of China has approved the 174--216 MHz, 407--425 MHz, and 608--630 MHz bands for medical information transmission. China... | |
| The network-based coexistence information exchange among networks and devices to enable network-based coexistence management is defined in this amendment to IEEE 802.19.1-2014. This amendment specifies procedures and protocols for collection... | |
| The object of this Test Procedure is to establish a uniform method for determining operating temperature limits for ventilated dry-type power and distribution transformers, to give a reasonable life expectancy... | |
| The optional use of Cipher Suites that make use of a 64-bit (PN) to allow more than 232 MACsec protected frames to be sent with a single Secure Association Key... | |
| The promotion of clarity and consistency in the use of radar terminology is the purpose of the definitions provided in this guide. The consensus of a panel of radar experts... | |
| The protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN) are defined in this... | |
| The protocol and compatible interconnection for data communication devices using low-data-rate, low-power, and low-complexity short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN) were defined in IEEE... | |
| The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz and 60 GHz radio transmissions in a Wireless Personal Area Network (WPAN) using low power and... | |
| The protocol and compatible interconnection of data and multimedia communication equipment via 2.4 GHz radio transmissions in a Wireless Personal Area Network (WPAN) using low power and multiple modulation formats... | |
| The provisions of this recommended practice apply to (a) All electrical equipment and wiring between the point of connection in the power supply substation and the connection to the furnace... | |
| The purpose of the IEEE standard presented is to provide uniform, minimum acceptable requirements for preparation and content of software quality assurance plans (SQAPs). In considering adoption of this standard,... | |
| The purpose of this amendment is to improve the IEEE 802.11 wireless local area network (WLAN) user experience by providing significantly higher basic service set (BSS) throughput for existing WLAN... | |
| The purpose of this amendment is to improve the IEEE 802.11™ wireless local area network (WLAN) user experience by providing significantly higher basic service set (BSS) throughput for existing WLAN... | |
| The purpose of this guide is to provide application information to users of carrier equipment as applied on power transmission lines. It is hoped that this guide will be useful... | |
| The purpose of this guide is to provide application information to users of carrier equipment as applied on power transmission lines. Since the major applications of the power-line carrier (PLC)... | |
| The purpose of this standard is to present a simplified method of calculating the current-temperature relationship of bare over-head lines when given the weather conditions. | |
| The routing of packets in dynamically changing wireless networks is facilitated in this recommended practice. The result is an extension of the area of coverage as the number of nodes... | |
| The scope is the correction of Figure 1, Figure 2, Figure A. 1 and Figure B.1 of IEC/IEEE 62582-2:2011. | |
| The scope is to provide a recommended practice to provide the architectural framework enabling WPAN devices to promote interoperable, stable, and scaleable wireless mesh topologies and, if needed, to provide... | |
| The smart utility network (SUN) physical layers (PHYs) in IEEE Std 802.15.4(TM)-2015 are changed by this amendment to enable the use of the 870--876 MHz and 915--921 MHz bands in... | |
| The specification and test requirements for a single-axis laser gyro for use as a sensor in attitude control systems, angular displacement measuring systems, and angular rate measuring systems is defined. | |
| The standard applies to wires and cables, used principally for power system communications and control purposes, which are located within electric power stations or are installed within the zone of... | |
| The standard covers the structural design and application of wood transmission structures. The guide includes definitions, application of loads, structure application, characteristics of natural wood and laminated wood members, design... | |
| The standard provides an unambiguous and machine-independent definition of the computer programming language Extended Pascal by specifying requirements for a processor and for a conforming program. Its purpose is to... | |
| The standard provides criteria for the design, testing, and maintenance of security system equipment for nuclear power generating stations. Such equipment includes permanently or temporarily installed systems, subsystems, and components... | |
| The standard specifies extensions to high-level languages for microprocessor applications. It covers computer languages for which there exist either ANSI or IEEE standards, or draft standards in preparation by existing... | |
| The standard specifies the format and content of software quality assurance plans. It meets the IEEE/EIA 12207.1 requirements for such plans. | |
| The technical requirements of this standard form a compatibility standard for mobile broadband wireless access systems. The standard ensures that a compliant Access Terminal (AT) or User Terminal (UT) can... | |
| The use of traffic scheduling and per-stream filtering and policing to support cyclic queuing and forwarding are described in this amendment to IEEE Std 802.1Q-2014. (The PDF of this standard... | |
| The use of traffic scheduling and per-stream filtering and policing to support cyclic queuing and forwarding are described in this amendment to IEEE Std 802.1Q-2014. | |
| The WirelessMAN-Advanced Air Interface, an enhanced air interface designated as "IMT-Advanced" by the International Telecommunication Union--Radiocommunic ation Sector (ITU-R), is specified in this standard. The PDF of this standard is... | |
| The YANG data model specified in this amendment to IEEE Std 802.1X™-2010 allows configuration and status reporting for port-based network access control, in the scenarios described in Clause 7 of... | |
| Theory, application of phase-shifting transformers, and the difference of specification and testing to standard system transformers are described in this guide. Various types of phase-shifting transformers and how to select... | |
| Theory, application of phase-shifting transformers, and the difference of specification and testing to standard system transformers are described. Various types of phase-shifting transformers and how to select the optimal design... | |
| Thermal limit curves for induction machines are defined. A procedure is established for the presentation of these curves, and guidance for the interpretation and use of these curves for machine... | |
| These recommended practices are intended as a reference document for use by members of cement industry electrical maintenance departments. The procedures necessary for an efficient maintenance operation are summarized, and... | |
| These technical requirements of this standard form a compatibility standard for mobile broadband wireless access systems. The requirements standard ensures that a compliant Access Terminal (AT) or User Terminal (UT)... | |
| This air interface, including the medium access control layer (MAC) and physical layer (PHY), of the fixed and portable point-to-multipoint wireless regional area networks (WRANs) operating in spectrum allocated to... | |
| This amendment defines a physical layer for IEEE Std 802.15.4(TM)-2015, capable of supporting 2 Mb/s data rates, utilizing the 2400-2483.5 MHz band, having backwards-compatibil ity to, and the same occupied... | |
| This amendment defines alternate PHY and modifications to the MAC needed to support the PHY that complies with the applicable Chinese regulations, Radio Management of P. R. of China doc. | |
| This amendment defines an architecture and bridge protocols for interconnection of multiple Provider Bridged Networks, allowing a Provider to support up to 224 service instances. | |
| This amendment defines an architecture and bridge protocols for interconnection of multiple Provider Bridged Networks, allowing a Provider to support up to 2^24 service instances. | |
| This amendment defines and alternative physical layer (PHY) for IEEE Std 802.15.3-2003. Three PHY modes have been defined that enable data rates in excess of 5 Gb/s using the 60... | |
| This amendment defines enhancements to the IEEE 802.11 physical layer (PHY) and medium access control (MAC) to support operation in the 3650¿3700 MHz band in the United States. | |
| This amendment defines modifications to both the 802.11 physical layers (PHY) and the 802.11 Medium Access Control Layer (MAC) so that modes of operation can be enabled that are capable... | |
| This amendment defines modifications to both the IEEE 802.11 physical layers (PHYs) and the IEEE 802.11 medium access control layer (MAC) to enable operation in frequencies around 60 GHz and... | |
| This amendment defines security mechanisms for IEEE 802.11. It includes a definition of WEP for backward compatibility with the original standard, IEEE Std 802.11, 1999 Edition. It defines TKIP and... | |
| This amendment defines the medium access control (MAC) procedures to support local area network (LAN) applications with quality of service (QoS) requirements. The procedures include the transport of voice, audio,... | |
| This amendment describes protocols for IEEE 802.11 stations to form self-configuring multi-hop networks that support both broadcast/multicast and unicast data delivery. | |
| This amendment enables a service provider to use the architecture and protocols of IEEE Std 802.17TM-2004 to offer improvements in bandwidth utilization, by means of spatial reuse, for applications of... | |
| This amendment enables a service provider to use the architecture and protocols of IEEE Std 802.1Q to offer the equivalent of separate LANs, Bridged Local Area Networks, or Virtual Bridged... | |
| This amendment enhances IEEE 802.20 Management Information Base (MIB) clauses to include additional information and MIB documentation (i.e., a discussion of security impacts, and cross references to the text for... | |
| This amendment extends the connectivity fault management capabilities introduced in IEEE Std 802.1ag-2007 to include tools to facilitate diagnosis and isolation of faults sensitive to, or caused by, particular data... | |
| This amendment includes management information base (MIB) definitions in IEEE Std 802.1Q. | |
| This amendment is based on the current edition of IEEE Std 802.3-2002 plus changes incorporated by IEEE Std 802.3ae-2002. Abstract: Support for optionally powering a 10BASE-T, 100BASE-TX or 1000BASE-T DTE... | |
| This amendment provides corrections and optimizations to IEEE Std 802.15.3-2003. The management service access points (SAPs) have been completely updated to create a consistent, logical interface. As a consequence, most... | |
| This amendment provides direct-link setup enhancements to the IEEE 802.11 MAC and PHY, extending direct-link setup to be independent of the access point (AP), and adding power save capabilities. The... | |
| This amendment provides two PHYs (MSK and LRP UWB) that can be used in a wide range of applications requiring various combinations of low cost, low energy consumption, multiyear battery... | |
| This amendment provides Wireless Network Management enhancements to the IEEE 802.11 MAC, and PHY, extending radio measurements to effect a complete and coherent upper layer interface for managing IEEE 802.11... | |
| This amendment specifies a set of protocols that replaces the GARP, GMRP, and GVRP protocols specified in earlier versions of IEEE Std 802.1Q. | |
| This amendment specifies changes to IEEE Std 802.1Q-2005, as amended by IEEE Std 802.1ad-2005, IEEE Std 802.1ag-2007, IEEE Std 802.1ak-2007, IEEE Std 802.1ah-2008, and IEEE Std 802.1ap-2008, that support provisioning... | |
| This amendment specifies enhancements to the IEEE 802.11 medium access control (MAC) that support wireless local area network (WLAN) interworking with external networks. It enables higher layer functionalities to provide... | |
| This amendment specifies protocols, procedures and managed objects that support congestion management of long-lived data flows within network domains of limited bandwidth-delay product. This is achieved by enabling bridges to... | |
| This amendment specifies protocols, procedures, and managed objects to support connectivity fault management. These allow discovery and verification of the path, through bridges and LANs, taken for frames addressed to... | |
| This amendment specifies protocols, procedures, and managed objects, usable by existing higher layer mechanisms, that allow network resources to be reserved for specific traffic streams traversing a bridged local area... | |
| This amendment specifies the extensions to IEEE Std 802.11 ¤ for Wireless Local AreaNetworks providing specifications for conformant operation beyond the original six regulatory domains of that standard. These extensions... | |
| This amendment specifies the extensions to IEEE Std 802.11 for Wireless LANs providing mechanisms for Radio Resource Measurement. | |
| This amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing mechanisms for protecting management frames. | |
| This amendment specifies the extensions to IEEE Std 802.11 for wireless local area networks (WLANs) providing wireless communications while in a vehicular environment. | |
| This amendment specifies the extensions to IEEE Std 802.11® for Wireless Local Area Networks providing mechanisms for operation in the 4.9 GHz and 5 GHz bands in Japan. This amendment... | |
| This amendment specifies the extensions to IEEE Std 802.11-2007 for wireless local area networks (WLANs) providing mechanisms for fast basic service set (BSS) transition. | |
| This amendment specifies the GCM-AES-256 Cipher Suite as an option in addition to the existing mandatory to implement Default Cipher Suite, GCM-AES-128. | |
| This amendment specifies the mechanism for the support of bridging of IEEE 802.20 networks. | |
| This amendment specifies the WirelessMAN-Advanced Air Interface, an enhanced air interface designated as "IMT-Advanced" by the International Telecommunication Union--Radiocommunic ation Sector (ITU-R). The amendment is based on the WirelessMAN-OFDMA specification... | |
| This amendment to IEEE 802.1Q,1998 Edition is intended to document maintenance items identified in the text of IEEE Std 802.1Q,1998 Edition.IEEE Std 802.1u-2001 identifies any proposed changes to IEEE Std... | |
| This amendment to IEEE Std 802.15.10 fully defines how the addressing and route information (already defined in the recommended practice) are to be used by the routing modes (also currently... | |
| This amendment to IEEE Std 802.15.4(TM)-2011 specifies a PHY for use in equipment intended to address rail transportation industry needs and to meet US positive train control (PTC) regulatory requirements... | |
| This amendment to IEEE Std 802.15.4-2006 addresses principally outdoor low data rate, wireless, smart metering utility network requirements. It defines alternate PHYs and only those MAC modifications needed to support... | |
| This amendment to IEEE Std 802.15.4-2006 is limited to defining a new PHY and such changes to the MAC as are necessary to support a new frequency allocation (950 MHz)... | |
| This amendment to IEEE Std 802.1Q defines enhancements to the forwarding and queueing functions of a VLAN Bridge to support the transmission of time-sensitive data streams. | |
| This amendment to IEEE Std 802.1Q specifies the function of a MAC Relay with two MACs, and the protocols and procedures to support its operation. A MAC Relay is transparent... | |
| This amendment to IEEE Std 802.1Q,1998 Edition describes enhancements to allow for classification of incoming packets by methods other than source port.Specifically, it defines rules for classification based on data-link... | |
| This amendment to IEEE Std 802.1Q-2011 defines enhancements to transmission selection to support allocation of bandwidth amongst traffic classes, plus a protocol for controlling the application of Data Center Bridging... | |
| This amendment to IEEE Std 802.1Q-2011 specifies localized protection of selected Traffic Engineered Service Instances traversing a common sequence of Provider Network Ports. | |
| This amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects that -- Provide for the discovery, configuration, and control of a pair of direct-attached limited-function Service VLAN (S-VLAN)... | |
| This amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects that enable flow control per traffic class on IEEE 802(R) point-to-point full duplex links. This is achieved by... | |
| This amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects to support topology change signaling to alter the binding (held in an I-Component) of Customer addresses to Backbone... | |
| This amendment to IEEE Std 802.1Q-2011 specifies shortest path bridging of unicast and multicast frames, including protocols to calculate multiple active topologies that can share learned station information, and support... | |
| This amendment to IEEE Std 802.1Q-2011 specifies the use of service virtual local area networks (S-VLANs) to provide customer service interfaces in one Provider Bridged Network for customer interface local... | |
| This amendment to IEEE Std 802.3-2002 as amended by IEEE Std 802.3ae-2002, IEEE Std 802.3af-2003 and IEEE Std 802.3aj-2003 specifies a new physical layer medium dependent sublayer interface for 10Gb/s... | |
| This amendment to IEEE Std 802.3-2002 as amended by IEEE Std 802.3ae-2002, IEEE Std 802.3af-2003, IEEE Std 802.3aj-2003, and IEEE Std 802.3ak-2004 combines a minimal set of extensions to the... | |
| This amendment to IEEE Std 802.3-2005 extends the IEEE 802.3 basic frame format with the addition of an envelope frame to accommodate additional prefixes and suffixes required by higher layer... | |
| This amendment to IEEE Std 802.3-2005 includes the new Clause 69 through Clause 74. Clause 69 provides an overview of Ethernet operation over electrical backplanes. Clause 70 through Clause 72... | |
| This amendment to IEEE Std 802.3-2005 specifies a new Physical Coding Sublayer interface and a new Physical Medium Attachment sublayer interface for 10 Gb/s Ethernet. 10GBASE-T specifies a LAN interconnect... | |
| This amendment updates and expands Clause 12 of IEEE Std 802.16-2001, which concerns system profiles that list sets of features and functions to be used in typical implementation cases. Errors... | |
| This corrigendum clarifies and corrects isolation text including harmonization for both powered and unpowered Medium Dependent Interfaces | |
| This corrigendum to IEEE Std 802.1AC™-2016 corrects the value of the LLC Encapsulation EtherType.(The PDF of this standard is available at no cost to you compliments of the IEEE GET... | |
| This corrigendum to IEEE Std 802.1AS - 2011 corrects minor errors, bugs, ambiguities, and inconsistencies that were missed when the document was balloted. It does not contain new material. (The... | |
| This corrigendum to IEEE Std 802.1AS provides technical and editorial corrections. | |
| This corrigendum to IEEE Std 802.1Q corrects errors in the MRP protocol specification. | |
| This corrigendum to IEEE Std 802.1Q-2011 corrects technical and editorial errors identified by the IEEE 802.1 Working Group's maintenance activity. | |
| This corrigendum to IEEE Std 802.3-2015 clarifies which lane of the media dependent interface (MDI) of a multi-lane Physical Layer entity (PHY) is used as the timestamping reference point. | |
| This document amends IEEE Std 802.16-2004 by defining a management information base (MIB) for the MAC and PHY and associated management procedures. | |
| This document amends IEEE Std 802.1D, as previously amended by IEEE Std 802.17a(TM)-2004, to support the bridging of the IEEE 802.16 medium access control. | |
| This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in 802 LANs. | |
| This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in IEEE 802 LANs. | |
| This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in IEEE 802(R) LANs. (The PDF of... | |
| This document prescribes criteria that establish protection requirements for Class 1E power systems and equipment. It describes the purpose of and the means for obtaining protection from electrical and mechanical... | |
| This document provides enhancements to IEEE Std 802.16-2004 to support subscriber stations moving at vehicular speeds and thereby specifies a system for combined fixed and mobile broadband wireless access. Functions... | |
| This document provides recommended practices for designing and installing electric heat tracing systems in nuclear power generating stations. These electric heat tracing systems are applied, both for critical process temperature... | |
| This guide addresses the application, design concepts, and implementation of computer-based control systems for hydroelectric plant automation. It addresses functional capabilities, performance requirements, interface requirements, hardware considerations, and operator training. | |
| This guide addresses the inductive environment that exists in the vicinity of electric power and wire line telecommunications systems and the interfering effects that may be produced thereby; guidance is... | |
| This guide applies only to the United States and its territories. Electrical equipment manufacturers, owners, operators, and maintenance personnel who utilize polychlorinated biphenyls or conduct maintenance or manufacturing operations through... | |
| This guide applies to station service systems that supply electric power to auxiliary loads for electric power generating stations. The discussions and recommendations contained herein provide the practices, criteria, and... | |
| This guide applies to station service systems that supply electric power to auxiliary loads for electric power generating stations. The discussions and recommendations in this guide provide the practices, criteria,... | |
| This guide covers general recommendations for the operation, loading, and maintenance of turbine-driven synchronous generators that have cylindrical rotors. | |
| This guide covers power cables incorporating aluminum sheaths, except those of the SF rigid bus type. | |
| This guide describes, with examples, statistical methods to analyze times to break down and breakdown voltage data obtained from electrical testing of solid insulating materials, for purposes including characterization of... | |
| This guide has been written as an applications manual for engineers and authors who will be writing test procedures in ATLAS (Abbreviated Test Language for All Systems). It is not... | |
| This guide has mainly been written as an applications manual for engineers and authors who will be writing test procedures in ATLAS. The beginning chapters are also intended to provide... | |
| This guide is primarily concerned with outdoor ac substations, either conventional orgas-insulated. These include distribution, transmission, and generating plant substations. Withproper caution, the methods described herein are also applicable to... | |
| This guide provides guidelines for the organization of fossil-fueled power generating plant alarm and monitoring information into types and categories, taking into consideration information usefulness and limitations. This guide further... | |
| This IEEE recommended practice provides recommendations for the testing and start-up of electric heat tracing systems in power generating stations. The recommendations include the testing sequence of materials and components... | |
| This IEEE standard describes procedures for measuring medical ultrasound field parameters such as pressure, power and intensity. It is intended for use by persons involved in measurement of acoustic fields... | |
| This IEEE standard presents a recommended set of software subroutines for use with the CAMAC modular instrumentation and interface system of IEEE Std 583-1975. These subroutines provide a general capability... | |
| This IEEE standard reviews alternative noise control methods for identifying and controlling noise emission problems in planned and existing power plants. Noise control techniques, sound measurement and laws and regulations... | |
| This IEEE Standards product is part of the 802 family on LAN/MAN. Abstract: The lower transport layers [(Logical Link Control and Adaptation Protocol (L2CAP), Link Manager Protocol (LMP), baseband, and... | |
| This IEEE Standards product is part of the 802 family on LAN/MAN. Port-based network access control makes use of the physical access characteristics of IEEE 802 Local Area Networks (LAN)... | |
| This IEEE Standards product is part of the 802 family on LAN/MAN. This amendment to IEEE Std 802.1Q,1998 Edition describes enhancements to allow for classification of incoming packets by methods... | |
| This IEEE Standards product is part of the 802 family on LAN/MAN. This standard defines an architecture for Virtual Bridged LANs, the services provided in Virtual Bridged LANs, and the... | |
| This is a guide for determining applicable tests and inspection techniques for various types of large rotating electric machines. It provides short discussions relating to the capabilities and limitations of... | |
| This pamphlet is one of a series comprising the Report on Aircraft and Missiles Electric Systems Guide, and has been so printed in order to allow for more convenient revision... | |
| This recommended practice addresses the issue of coexistence of wireless local area networks and wireless personal area networks. These wireless networks often operate in the same unlicensed band. This recommended... | |
| This recommended practice outlines a test procedure for the evaluation of the impulse voltage capability of insulation systems of form-wound alternating current rotating electrical machinery. This test procedure forms a... | |
| This recommended practice provides recommendations for the design and coordinated deployment of fixed broadband wireless access systems in order to control interference and facilitate coexistence. It analyzes appropriate coexistence scenarios... | |
| This recommended practice serves as an engineering guide for use in electrical design for energy conservation. It provides a standard design practice to assist engineers in evaluating electrical options from... | |
| This report contains four supplements to IEEE 802.3: 802.3a Type 10BASE2 Coaxial Medium Specification (Section 10); 802.3b Type 10BROAD36 Medium Specification (Section 11); 802.3c Repeater Unit Specification; and 802.3e Type... | |
| This revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as enhancements to the existing medium access control (MAC) and physical... | |
| This Standard applies to all overhead, pad mounted, dry vault and submersible single or multi-pole alternating current automatic circuit reclosers and fault interrupters for rated maximum voltages above 1000 V... | |
| This standard applies to frequency scanning spectrum analyzers. Instruments covered by this standard include: swept front end (superheterodyning in which the first local oscillator is swept); swept IF (superheterodyning in... | |
| This standard contains methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using tensile elongation techniques in the detail necessary to produce accurate and reproducible... | |
| This standard deals with software for the CAMAC modular instrumentation and interface system of ANSI/IEEE Std 583-1975, Modular Instrumentation and Digital Interface System (CAMAC) (also Report EUR 4100e of the... | |
| This standard defines a method for incorporating more than one source of control into a CAMAC crate. The standard fully conforms to the mechanical and signal standards of the CAMAC... | |
| This standard defines a protocol and procedures for the transport of timing over bridged and virtual bridged local area networks. It includes the transport of synchronized time, the selection of... | |
| This standard defines an architecture for Virtual Bridged LANs, the services provided in Virtual Bridged LANs, and the protocols and algorithms involved in the provision of those services. (Incorporates IEEE... | |
| This standard defines ANSI Standard Real-Time BASIC, in which the declarations and real-time statements are defined for use with CAMAC hardware. It covers real-time capabilities, declarations, parallel activities, CAMAC input... | |
| This standard defines management procedures as enhancements to the IEEE 802.16 air interface standard for fixed and mobile broadband wireless systems. It specifies the management functions, interfaces, and protocol procedures. | |
| This standard defines profiles that select features, options, configurations, defaults, protocols, and procedures of bridges, stations, and LANs that are necessary to build networks that are capable of transporting fronthaul... | |
| This standard defines services and protocol elements that permit the downloading of memory images to data processing equipment attached to IEEE 802 local and metropolitan area networks. The protocol makes... | |
| This standard defines the IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digital, and mixed-signal systems. The language, also informally known as VHDL-AMS,... | |
| This standard defines the medium access control characteristics, physical layer interface methods and layer management parameters for the resilient packet ring (RPR) access method for ring topologies. A set of... | |
| This standard defines the protocol and compatible interconnection for data communication devices using low-data-rate, low-power and low-complexity, short-range radio frequency (RF) transmissions in a wireless personal area network (WPAN). | |
| This standard defines the protocol and data formats for communication devices forming a beaconing network that are used to protect low-power, licensed devices operating in television broadcast bands from harmful... | |
| This standard defines YANG modules for various Ethernet devices specified in IEEE Std 802.3. This includes half-duplex and full-duplex data terminal equipment (DTE) using either Carrier Sense Multiple Access /... | |
| This standard describes methods for measuring ther performance of uniformly coded alnalog-to-digital (A/D) coverters and digital-to-analog (D/A) converters for pulse code modulation (PSM) television video signals. Excluded are A/D and... | |
| This standard describes the functions, and features and protocol of the logical link control (LLC) sublayer in the local area network protocol. It describes the LLC sublayer interface service specifications... | |
| This standard extends IEEE Std 1450-1999 (STIL) to support the definition of DC levels. STIL language constructs are defined to specify the DC conditions necessary to execute digital vectors on... | |
| This standard has ten sections: an introduction to the MNOS device and memory array; symbols and definitions; references that contain added detail on specific concepts; MNOS arrays and functional operations; | |
| This standard is applicable to fire stops of various materials and construction. Cable-penetration fire stops are intended for use in fire-resistive barriers. Tests conducted in conformance with this standard will... | |
| This standard is intended to aid the electric power industry in reporting and evaluating electric generating unit reliability, availability, and productivity. It was developed to overcome present difficulties in the... | |
| This standard is intended: (1) To define a rational, general-purpose interface system for designers of new computer system components that will ensure their compatibility with present and future IEEE Std... | |
| This standard is part of a family of local area network (LAN) standards dealing with the physical and data link layers as defined by the ISO Open Systems Interconnection Reference... | |
| This standard provides a framework for introducing nanomaterials such as graphene into large scale, high volume manufacturing in established semiconductor factories (fabs). Since semiconductor fabs must incorporate practices that maintain... | |
| This standard provides a methodology for the interpretation of electric generating unit performance data from various systems and to facilitate comparisons among different systems. It also standardizes terminology and indexes... | |
| This standard provides a set of extensions to the IEEE 1364™ Verilog® hardware description language (HDL) to aid in the creation and verification of abstract architectural level models. It also... | |
| This standard provides an overview to the family of IEEE 802 standards. It describes the reference models for the IEEE 802 standards and explains the relationship of these standards to... | |
| This standard provides brief descriptions of applicable tone address signaling techniques and definitions of the related signaling parameters that affect performance. The classes of instruments intended to measure the parameters... | |
| This standard provides direction for establishing type tests for qualifying the performance of cable penetration fire stops when mounted in rated fire barriers. | |
| This standard provides direction for the design and installation of safety-related electrical cable systems, including associated circuits, in nuclear power generating stations. Also provided is guidance for the design, installation... | |
| This standard provides methods for the measurement of sound pressure level produced by outdoor alternating current circuit-breakers in a free-field environment. These methods may also be used indoors or in... | |
| This standard provides the means to define and describe signals used in testing. It also provides a set of common basic signals, mathematically underpinned so that signals can be combined... | |
| This standard represents a merger of two previous standards: IEEE Std 1364-2005 Verilog hardware description language (HDL) and IEEE Std 1800-2005 SystemVerilog unified hardware design, specification, and verification language. The... | |
| This standard represents an extension to the IEEE 1505 receiver fixture interface (RFI) standard specification. Particular emphasis is placed on defining within the IEEE 1505 RFI standard a more specific... | |
| This standard represents the Protocol Implementation Conformance Statement Proforma, per ISO/IEC 9646-7 (1995) and ITU-T X.296, for conformance specification of base stations and subscriber stations based upon the WirelessMAN-SC air... | |
| This standard represents the Protocol Implementation Conformance Statement Proforma, per ISO/IEC 9646-7 and ITU-T X.296, for conformance specification of access nodes and access terminals based on the air interface specified... | |
| This standard represents the Radio Conformance Tests (RCT) specification for base stations and subscriber stations based upon the WirelessMAN-SC(TM) (10-66 GHz) air interface specified in IEEE 802.16. | |
| This standard represents the Test Suite Structure and Test Purposes (TSS&TP), per ISO/IEC 9646-1:1994 and 9646-2:1995 and ITU-T X.290 and X.291, for conformance specification of base stations and subscriber stations... | |
| This standard specifies formats and methods for floating-point arithmetic in computer systems: standard and extended functions with single, double, extended, and extendable precision, and recommends formats for data interchange. Exception... | |
| This standard specifies how all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by IEEE 802® LANs to communicate. | |
| This standard specifies how the MAC Service is supported by Virtual Bridged Local Area Networks, the principles of operation of those networks, and the operation of VLAN-aware Bridges, including management,... | |
| This standard specifies how the Media Access Control (MAC) Service is supported by Bridged Networks, the principles of operation of those networks, and the operation of MAC Bridges and VLAN... | |
| This standard specifies IEEE 802® media access-independent mechanisms that optimize handovers between heterogeneous IEEE 802 systems and between IEEE 802 systems and cellular systems. | |
| This standard specifies interchange and arithmetic formats and methods for binary and decimal floating-point arithmetic in computer programming environments. This standard specifies exception conditions and their default handling. An implementation... | |
| This standard specifies minimum performance parameters and the associated test methodologies for implementation of IEEE 802.20 compliant systems. | |
| This standard specifies radio technology independent methods for network-based coexistence among dissimilar or independently operated networks of unlicensed devices and dissimilar unlicensed devices. The standard is defined for geo-location capable... | |
| This standard specifies the air interface of fixed broadband wireless access (BWA) systems supporting multimedia services. The medium access control layer (MAC) supports a primarily point-to-multipoint architecture, with an optional... | |
| This standard specifies the air interface, including the cognitive medium access control layer (MAC) and physical layer (PHY), of point-to-multipoint wireless regional area networks comprised of a professional fixed base... | |
| This standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile point-to-multipoint broadband wireless access (BWA) systems providing multiple... | |
| This standard specifies the operation of Bridge Port Extenders, including management, protocols, and algorithms. Bridge Port Extenders operate in support of the MAC Service by Extended Bridges. The PDF of... | |
| Two alternate physical layers (PHYs), TASK and RS-GFSK, are specified in this amendment in addition to the PHYs of IEEE Std 802.15.4-2015. The amendment also defines the medium access control... | |
| Two PHYs (DSSS and FSK) that support critical infrastructure monitoring applications are provided in this amendment to IEEE Std 802.15.4TM-2011. In addition, only those MAC modifications needed to support the... | |
| Uniform procedures are established for manual and automatic measurement of audible noise from overhead transmission lines. Their purpose is to allow valid evaluation and comparison of the audible noise performance... | |
| Uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC) overhead power lines and for the calibration of the meters used in these measurements... | |
| Uniform, minimum acceptable requirements for preparation and content of Software QualityAssurance Plans (SQAPs) are provided. This standard applies to the development and maintenance of critical software. For non-critical software, or... | |
| Weather conditions, is presented. Along with a mathematical method, sources of the values to be used in the calculation are indicated. This standard does not undertake to list actual temperature-ampacity... | |
| WirelessMAN-OFDMA TDD operation in exclusively licensed spectrum with channel bandwidth from 100 kHz up to 1.25 MHz, including 1 MHz explicitly, is specified. This amendment targets operation in the 700... | |
| Withdrawn Jan 16, 2004. The secure data exchange (SDE) protocol implementation conformance statement (PICS) proforma is provided. The SDE PICS proforma defines the information to be supplied by protocol implementors... | |
| Withdrawn Standard. Supplement to the IEEE 802.12 Demand Priority Access Method allowing optional implementation of redundant links to facilitate automatic recovery of network connectivity in case of link or repeater... | |
| Withdrawn Standard. Withdrawn Date: Jun 18, 1992. This standard specifies the semantics and syntax of the computer programming language Pascal by specifying requirements for a processor and for a conforming... |
| << Prev | Next >> |