IEEE - Institute of Electrical and Electronics Engineers, Inc. Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| " Guidance for providing products that satisfy the customer is given. This standard guidessuppliers in planning a program that suits their design philosophy, the product concept, and the resourcesat their... | |
| " This recommended practice addresses the activities of the creation, analysis, and sus-tainment of architectures of software-intensive systems, and the recording of such architectures interms of architectural descriptions . A... | |
| " Those characteristics of a dedicated short-range communications (DSRC) system thatare independent of the Physical and Data Link Layers (ISO model Layers 1 and 2) are specified.The required and optional... | |
| A C language binding to IEEE Std 1224.1-1993, IEEE Standard for Information Technology--X.400-Ba sed Electronic Messaging--Applicati on Program Interface (API) [Language Independent] is defined. This standard is intended for use... | |
| A C language binding to IEEE Std 1351-1994, a language-independent standard defining an application program interface (API) to the ACSE application service element from the OSI application layer and the... | |
| A C programming language binding for the Application Program Interface (API) to directory services in IEEE Std 1224.2-1993 is defined. This standard is intended for use by application developers, system... | |
| A C programming language binding for the general-purpose OSI Abstract Data Manipulation (OM) Application Program Interface (API) in IEEE Std 1224- 1993 is defined. This standard is intended for use... | |
| A common framework for extending the software life cycle processes of IEEE/EIA Std 12207.0-1996 to include the systematic practice of software reuse is provided. This standard specifies the processes, activities,... | |
| A common framework for extending the system and software life cycle processes of IEEE Std 12207(TM)-2008 to include the systematic practice of reuse is provided. The processes, activities, and tasks... | |
| A conceptual data schema that defines the structure of a metadata instance for a learning object is specified in this standard. | |
| A conceptual model for interpreting externalized representations of digital aggregations of resources for learning, education, and training is defined. The conceptual model is defined as an ontology. Internal compositions and... | |
| A definition of the requirements placed upon providers of a POSIX Conformance Test Suite for the POSIX.2 standard (ISO/IEC 9945-2:1993, IEEE/ANSI Std. 1003.2-1992) is provided. These requirements consist of a... | |
| A description is given of the "IEEE Trial-Use Supplement to the IEEE Standard for Information Technology-Software Reuse-Data Model for Reuse Library Interoperability: Intellectual Property Rights Framework". This extension to the... | |
| A description of the data, techniques, and procedures typically used in modeling and analysis of traction power systems is provided in this guide. | |
| A device to carry on multiple, concurrent exchanges of data and/or control information with another device across a single point-to-point link allowed by the packet protocol is described in this... | |
| A digital interface for connecting multiple physically separated transducers to a single processor over a single pair of wires. The interface can support both asynchronous and isochronous data transfers. Several... | |
| A digital interface for connecting transducers to microprocessors is deÞned. A TEDS and its data formats are described. An electrical interface, read and write logic functions to access the TEDS... | |
| A format is presented that provides a concise and meaningful method for recording pertinent information on power circuit breaker field failures. It is recommended that this format be utilized in... | |
| A framework for reliability prediction procedures for electronic equipment at all levels is provided in this guide. | |
| A high-bandwidth interface optimized for interchanging data between a memory controller and one or more dynamic RAMs is specified. RamLink is an applicable interface for other RAM-like devices as well. | |
| A high-speed serial bus that interates well with most IEEE standard 32-bit and 64-bit parallel buses, as well as such nonbus interconnects as the IEEE Std 1596-1992, Scalable Coherent Interface,... | |
| A language and file format for describing parametric test data is defined. Data types, data formats and file formats are included. | |
| A language-independent Application Program Interface (API) to the ACSE application service element of the OSI application layer and the connection-oriented services of the presentation layer are defined. The purpose of... | |
| A listing of possible measurement goals related to characterizing quasi-static magnetic and electric fields and possible methods for their accomplishment is provided. (The PDF of this standard is available at... | |
| A mechanical and electrical specification for implementing a common interoperable mechanical quick-disconnect interconnect system for use by industry for interfacing large numbers of electrical signals (digital, analog, RF, power, etc.)... | |
| A method to validate computational electromagnetics computer modeling and simulation techniques, codes, and models is defined in this standard. It is applicable to a wide variety of electromagnetic applications including,... | |
| A preferred approach for functional testing of a communications-based train control (CBTC) system, based on the CBTC system design and functional allocations as defined in IEEE Std 1474.3(TM)-2008, is established... | |
| A process for the management of risk in the life cycle is defined. It can be added to the existing set of software life cycle processes defined by the ISO/IEC... | |
| A process for the management of risk in the life cycle of software is defined. It can be added to the existing set of software life cycle processes defined by... | |
| A protocol and methodology for software developers, computer vendors and printer manufacturers to facilitate the orderly exchange of information between printers and host computers are defined in this standard. A... | |
| A recommended procedure for the selection, application, and determination of the remaining life in molded case circuit breaker is provided. | |
| A recommended procedure for the selection, application, and determination of the remaining life in molded-case circuit breaker is provided. | |
| A recommended procedure for the selection, application, and determination of the remaining life in molder case circuit breaker is provided. | |
| A review of the nature of partial discharge in machine windings, how it can be measured under both off-line and on-line conditions, how it can be measured for individual form... | |
| A review of the nature of partial discharge in machine windings, how it can be measuredunder both off-line and on-line conditions, how it can be measured for individual form-wound coilsor... | |
| A scalable interface between mass-storage devices and controlling hardware/software is specified in this standard. The interface is optimized for low-latency interconnects, and assumes that the processor/controller and the storage device... | |
| A set of metrics and methods to enable consistent measurement of the components of timing interval error in video synchronization signals is provided in this standard. By partitioning the spectra... | |
| A set of standard verification tasks for processor-based equipment used in safety-critical applications on rail and transit systems is covered. This standard also covers processes that verify the level of... | |
| A signaling method for asynchronous, fully interlocked, bidirectional parallel communi-cations between hosts and printers or other peripherals is defined. A functional subset of the signaling method may be implemented on... | |
| A signaling method for asynchronous, fully interlocked, bidirectional parallel communications between hosts and printers or other peripherals is defined. A format for a peripheral identification string and a method of... | |
| A standard defining communication delivery times of information to be exchanged within and external to substation integrated protection, control, and data acquisition systems is described. Communication capabilities and system capabilities... | |
| A standard methodology for the technical and financial analysis of voltage sag compatibility between process equipment and electric power systems is recommended. The methodology presented is intended to be used... | |
| A standard set of reliability program objectives for use between customers and producers, or within product development teams, to express reliability program requirements early in the development phase of electronic... | |
| A step-by-step process for selecting an appropriate termination that is commensurate with a particular shielded power cable design is provided in this guide. Over the years, shielded power cables have... | |
| A technical basis for implementation of electronic power subsystems is provided in this recommended practice. It is intended for electronic systems engineers and integrators, electronic power subsystem designers and integrators,... | |
| A test method to determine the relative ablility of high-voltage, form-wound stator bars and coils of large rotating machines to resist deterioration due to rapid heating and cooling resulting from... | |
| A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; | |
| A uniform set of guidelines for communications and inter-operations of Intelligent Electronic Devices (IEDs) and Remote Terminal Units (RTUs) in an electric utility substation is provided. A mechanism for adding... | |
| A uniform set of guidelines for communications and interoperations of remote terminalunits (RTUs) and intelligent electronic devices (IEDs) in an electric utility substation is provided. Amechanism for adding data elements... | |
| AC adjustable speed drive (ASD) systems rated above 375 kW and above 750 V output voltage as used in petrochemical and similar applications are applicable to this standard. Performance requirements... | |
| Administratively withdrawn January 2007. The mechanics of a common mezzanine card (CMC) family are defined in this standard.Mezzanine cards, designed to this standard, can be used interchangeably on VME, VME64... | |
| Adoption of IEC 61000-4-15. Voltage fluctuations on electric power systems sometimes give rise to noticeable illumination changes from lighting equipment. This phenomenon is often referred to as flicker, lamp flicker,... | |
| Alternative approaches and good practices for the design, operation, and integration of distributed resource (DR) island systems with electric power systems (EPS) are provided. This includes the ability to separate... | |
| Amend the guide to add guidelines for producing reusable TSFs for use on platforms utilizing ATML, and produce example TSFs showing conformance with the guidelines. This guide explains how signal... | |
| Amended information for a high-speed Serial Bus that integrates well with most IEEE stan-dard 32-bit and 64-bit parallel buses is specified. This amendment is intended to extend the usefulness of... | |
| Amendment to 1584-2002 This amendment provides additions and corrections to IEEE Std 1584-2002. | |
| Amendment to IEEE Std 1363-2000, this standard specifies additional public-key cryptographic techniques beyond those in IEEE Std 1363-2000. It is intended to be merged with IEEE Std 1363-2000 during future... | |
| Amendment to IEEE Std 1528-2003. This amendment to IEEE Std 1528 addresses certain text ambiguities in IEEE Std 1528-2003 and provides a CAD data file for the human head model... | |
| An aid in the understanding and use of digital test interchange format (DTIF) files is provided in this guide. This information will be an aid to users in developing tools... | |
| An application guide for non-ceramic line posts is being drafted. The guide will include handling recommendations, interpretation of manufacturer ratings, contamination considerations, and equivalency with porcelain. Project purpose: Users of... | |
| An approach to prepare a specification for an electronic device connected in series to compensate voltage fluctuations is presented. This guide intends to provide a base specification to allow users... | |
| An extension to the IEEE 1505TM receiver fixture interface (RFI) standard specification is provided in this standard. Particular emphasis is placed on defining within the IEEE 1505 RFI standard a... | |
| An input/output expansion bus with a 32- or 64-bit width is described in this standard. The SBus is designed for systems requiring a small number of expansion ports. SBus Cards... | |
| An input/output expansion bus with a 32-or 64-bit width is described in this standard.The SBus is designed for systems requiring a small number of expansion ports.SBus Cards may be connected... | |
| Application programming interface, API, computer managed instruction, content object, ECMAScript, ECMAScript API, learning content, learning management system, LMS, runtime service, RTS | |
| Appropriate electromagnetic threat levels, protection methods, monitoring techniques, and test techniques for specific classes of computer equipment are established. This equipment is expected to be accessible to the public at... | |
| Appropriate voltage sag indices and characteristics of electrical power and supply systems as well as the methods for calculating them are identified. Methods are provided for quantifying the severity of... | |
| Assurance-related terms are defined and an organized set of concepts and relationships to establish a basis for shared understanding across user communities for assurance are established in this adoption of... | |
| Background on light flicker caused by fluctuations in power demands of variable loads is presented in this recommended practice. A flicker measurement method is presented using a meter that is... | |
| Baseline environmental conditions under which transit rail car electronic equipment shallboth operate and/or survive are specified in this standard. | |
| Baseline environmental conditions under which transit railcar electronic equipment shall both operate and/or survive are specified in this standard. | |
| Changes to IEEE Std 1547-2003 existing 4.1.1 Voltage Regulation, 4.2.3 Voltage, and 4.2.4 Frequency are made by this amendment. | |
| Common identity-based public-key cryptographic techniques that use pairings, including mathematical primitives for secret value (key) derivation, public-key encryption, and digital signatures, as well as cryptographic schemes based on those primitives... | |
| Common structures are provided in this standard for encoding data in communication between End Devices (meters, home appliances, IEEE 1703 Nodes) and Utility enterprise collection and control systems using binary... | |
| Communication services to support information exchange between simulation applications participating in the distributed interactive simulation (DIS) environment are defined. These communication services describe a connectionless information transfer that supports real-time,... | |
| Communications protocols to be used for inter-unit and intra-unit serial data communications between subsystems aboard passenger trains are defined by this standard. Minimum acceptable parameters for a network that can... | |
| Communications protocols to be used for intercar and intracar serial data communica-tions between subsystems aboard passenger trains are defined by this standard. Minimum accept-able parameters for a network that can... | |
| Consensus calibration methods for electromagnetic (EM) field sensors and probes are provided. Data recording and reporting requirements are given, and a method for determining uncertainty is specified. | |
| Consensus calibration methods for electromagnetic (EM) field sensors and probes are provided. Data recording and reporting requirements are given, and methods for estimating measurement uncertainty are specified. | |
| Consensus calibration methods for electromagnetic field sensors and field probes are provided. Data recording and reporting requirements are given, and a method for determining uncertainty is specified. | |
| Corrigendum to IEEE Std 1293-1998. Specification and test requirements for linear, single-axis, nongyroscopic accelerometers for use as a sensor in attitude control systems, linear displacement measuring systems, and linear rate... | |
| Cryptographic and data authentication procedures for storage devices that support length expansion, such as tape drives, are specified. Such procedures include the following cryptographic modes of operation for the AES... | |
| Cryptographic transform for protection of data in sector-level storage devices is specified in this standard. | |
| Define structures in STIL for specifying the DC conditions for a device under test. Examples of the DC conditions for device power supplies are: device power supply setup, power sequencing... | |
| Definitions for antennas and for systems that incorporate an antenna as a component of the system are established in this standard. | |
| Definitions of terms in the field of antennas are provided. | |
| Descriptions of products, methods, and procedures relating to stationary batteries, battery electrolyte spill mechanisms, electrolyte containment and control methodologies, and fire fighting considerations are provided. | |
| Descriptions of products, methods, and procedures relating to stationary batteries, battery electrolyte spill mechanisms, electrolyte containment and control methodologies, and firefighting considerations are provided. | |
| Difficulties that may be encountered, and how they can be avoided, by organizations intending to adopt CASE tools are addressed. An overview of the adoption process, including analysis of the... | |
| Dimension requirements are presented for subracks, plug-in units, printed boards, and backplanes to be used in conjunction with IEEE Std 1301-1991 and with a 2.5 mm connector as defined in... | |
| Distribution reliability indices and factors that affect their calculations are defined in this guide. The indices are intended to apply to distribution systems, substations, circuits, and defined regions. An interpretation... | |
| Distribution reliability indices and factors that affect their calculations are defined in this guide. The indices are intended to apply to distribution systems, substations, circuits, and defined regions. | |
| Draft D12 This recommended practice prescribes the methods for assessing and predicting the reliability of software, based on a life cycle approach to software reliability engineering. It provides information necessary... | |
| EME2-AES and XCB-AES wide-block encryption with associated data (EAD) modes of the NIST AES block cipher, providing usage guidelines and test vectors, are described. A wide-block encryption algorithm behaves as... | |
| Enabling the construction of high-performance, scalable, modular, parallel systems with low system integration cost is discussed. Complementary use of physical connectors and cables, electrical properties, and logical protocols for point-to-point... | |
| Environmental testing requirements are defined for communications networkingdevices to be installed in transmission and distribution facilities. This standard establishes acommon reproducible basis for designing and evaluating devices utilizing radio frequency... | |
| Error identified in IEEE Std 1613-2003 are addressed in this corrigendum. | |
| Errors detected in the definition of the characteristic impedance of a transmission line and in the definition of image impedance of a two-part network are corrected. | |
| Extensions to the behavior of ISO/IEC 10038 (IEEE 802.1D) media access control (MAC) bridges, including the aspects of operation of remote MAC bridges that are observable on the interconnected LANs,... | |
| Factors that contribute to lightning-caused faults on the line insulation of overhead distribution lines and suggested improvements to existing and new constructions are identified in this guide. | |
| Formats for interchanging integer, bit-field, and floating point data between heterogeneous multiprocessors in a Scalable Coherent Interface (SCI) system are specified. The defined data formats can also be used to... | |
| Functionally related utility application data elements, grouped into a single data structure for transport are described. Data may be utilized peer-to-peer or upstream to readers or billing systems by being... | |
| General guidelines and criteria for the field testing of static var compensators (SVCs) before they are placed in-service, for the purpose of verifying their specified performance are described. The major... | |
| General guidelines and criteria for the field testing of static var compensators (SVCs), before they are placed in-service, for the purpose of verifying their specified performance are described. The major... | |
| General guidelines for commissioning high-voltage direct-current (HVDC) converter stations and associated transmission systems are provided in this IEEE Standard. These guidelines apply to HVDC systems utilizing 6-pulse or 12-pulse thyristor-valve... | |
| General recommendations for fall protection and rescue are provided. Sufficient details of the methods, equipment, and training requirements necessary to provide minimal risk procedures for personnel working at elevated worksites... | |
| General recommendations for fall protection and worker protection are provided. Sufficient details of the methods, equipment, and training requirements necessary to provide minimal risk procedures for personnel working at elevated... | |
| General recommendations for fall protection and worker protection are provided. Sufficient details of the methods, equipment, and training requirements necessary to provide safe and adequate procedures for personnel working at... | |
| Graphical user interface (GUI) applications and user interfaces to open systems are covered. This standard defines the application interface to a group of widgets built upon the X Window System... | |
| Guidance and recommendations for conducting selected processes, activities, and tasks for systems and software products requiring assurance claims for properties selected for special attention (called critical properties) are given in... | |
| Guidance for providing products that satisfy the customer is given. This standard guides suppliers in planning a reliability program that suits their design philosophy, the product concept and the resources... | |
| Guidance for the designer/manufacture r/supplier in planning and implementing controls for the design and manufacture of lithium-ion (Li-ion) and lithium-ion polymer (Li-ion polymer) rechargeable battery packs used for portable computing... | |
| Guidance for the designer/manufacture r/supplier in planning and implementing controls for the design and manufacture of lithium-ion and lithium-ion polymer rechargeable battery packs used for mobile computing devices is provided. | |
| Guidance for the specification and performance of an arc-flash hazard calculation study, in accordance with the process defined in IEEE Std 1584(TM), is provided in this document. It outlines the... | |
| Guidance in the protection of stationary battery systems is provided. For the purposes of this guide, stationary battery systems include the battery and DC components to and including the first... | |
| Guidance in the use of the signal and test definition (STD) standard is provided. STD provides the means to define and describe signals used in testing. This guide describes how... | |
| Guidance in the use of the signal and test definition (STD) standard, IEEE Std 1641-2010, is provided. IEEE Std 1641 provides the means to define and describe signals used in... | |
| Guidelines and performance expectations are provided for the application of power electronic-based equipment on distribution systems of power providers to improve power quality. It is a resource to electric utility... | |
| Guidelines are established for exercise management and feedback in distributed interactive simulation (DIS) exercises. Guidance is provided to sponsors, providers and supporters of DIS-compliant systems and exercises as well as... | |
| Guidelines are established for the verification, validation, and accreditation (VV&A) of distributed interactive simulation (DIS) exercises. "How-to" procedures for planning and conducting DIS exercise VV&A are provided. Intended for use... | |
| Guidelines are established for the verification, validation, and accreditation (VV&A) of distributed interactive simulation (DIS) exercises. How-to procedures for planning and conducting DIS exercise VV&A are provided. Intended for use... | |
| Guidelines for establishing criteria for application, performance, interchangeability, tests, life cycle costs, and safety requirements of traction power rectifier transformers are established in this standard. Set forth are the electrical,... | |
| Guidelines for specification of components, protection, and control of harmonic filters are provided. This guide applies to the use of 50 Hz and 60 Hz passive shunt power harmonic filters... | |
| Hardware performance, test requirements, procedures, and acceptance criteria for a transmission line overhead ground wire (also known as shield wire, static wire, earth wire, sky wire) with optical fibers commonly... | |
| IDEF0 function modeling is designed to represent the decisions, actions and activities of an existing or prospective organization or system. IDEF0 graphics and accompanying texts are presented in an organized... | |
| IDEF1X/sub 97/ consists of two conceptual modeling languages. The key-style language supports data/information modeling and is downward compatible with the US government's 1993 standard, FIPS PUB 184. The identity-style language... | |
| IEC 61000-4-15:2010 is adopted by this standard. IEC 61000-4-15:2010 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical... | |
| IEC 61523-3: 2004 Dual-logo document. Replaces IEEE Std 1497-2001. The Standard Delay Format (SDF) is defined in this standard. SDF is a textual file format for representing the delay and... | |
| IEC/TR 61000-3-7:2008 is adopted by this guide. IEC 61000-3-7:2008 provides guidance on the principles that can be used as the basis for determining the requirements for the connection of fluctuating... | |
| IEEE Standard | |
| IEEE Std 140-1990, Recommended Practice for Minimization of Interference from Radio-Frequency Heating Equipment, describes procedures that may be applied in the design and construction of radio-frequency heating equipment used for... | |
| IEEE Std 1528-2003 specifies protocols and test procedures for the measurement of the peak spatial-average SAR induced inside a simplified model of the head of users of certain handheld radio... | |
| IEEE Std 1547.7(TM) is part of the IEEE 1547(TM) series of standards. Whereas IEEE Std 1547(TM)-2003 provides mandatory requirements for the interconnection of distributed resources (DR) with electric power systems... | |
| IEEE Std 1581 defines a low-cost method for testing the interconnection of discrete, complex memory integrated circuits (ICs) where additional pins for testing are not available and implementing boundary scan... | |
| Implementation notes that relate to the IEEE interpretation of the ISO/IEC 14143-1:1998 standard are described. | |
| Improvement in service reliability is a factor in power transmission and distribution which has received considerable emphasis in recent years. Several means for obtaining improvement in service reliability are in... | |
| In 1969, IEEE Standard 145 was published as a list of basic terms of antenna theory and practice. That document treated antenna gain as a fundamental property, with impedance and... | |
| In setting up test procedures for radiation counter tubes, it is necessary to consider not only the test circuits but also the physical arrangements of test, such as nature of... | |
| In this IEEE standard a test method to determine the relative ability of high-voltage, form-wound stator bars and coils of large rotating machines to resist deterioration due to rapid heating... | |
| In this IEEE standard the coordination of design, material supply, installation, and test procedures required for the connection of a gas-insulated substation (GIS) is described. Preferred dimensions for mechanical and... | |
| In this IEEE standard the procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the... | |
| In this standard, the application of the analysis of gases dissolved in the fluids of fluid-filled cable systems is discussed with respect to the procedures for sampling, obtaining the dissolved... | |
| Industry practices and guidelines for installation, maintenance, and operation of irrigation equipment near or under power lines as they pertain to minimum distance to energized conductors and proper grounding to... | |
| Information on establishing an effective safety program to ensure compliance with the applicable regulations for radio frequency (RF) protection of electrical workers in the vicinity of wireless communication antennas adjacent... | |
| Information on the differences between stationary standby and stationary cycling applications and appropriate battery management strategies in cycling operations is covered in this guide. While the primary emphasis is on... | |
| Information on what a faulted circuit indicator (FCI) is designed to do, along with methods for selecting and applying FCIs for 200 / 600 A distribution circuits are described in... | |
| Information to assist users of gaskets in evaluating gasket measurement techniques to determine which exhibit the properties critical to the intended application, to highlight limitations and sources of error of... | |
| Information to assist users of gaskets in evaluating gasket measurement techniques to determine which reveal the properties critical to the intended application, to highlight limitations and sources of error of... | |
| Interoperability between components of automatic test systems (ATS) is promoted and facilitated. The standard facilitates the capture of maintenance action information (MAI) associated with the removal, repair, and replacement of... | |
| ISO/IEC 14515-1:2000(E) (IEEE Std 2003.1-1992) provides a definition of the requirements placed upon providers of POSIX test methods for POSIX.1 (ISO/IEC 9945-1:1990; IEEE Std 1003.1-1990). These requirements consist of a... | |
| ISO/IEC 15026-2:2011 is adopted by this standard. ISO/IEC 15026-2:2011 specifies minimum requirements for the structure and contents of an assurance case to improve the consistency and comparability of assurance cases... | |
| ISO/IEC/IEEE 15289:2011 provides requirements for identifying and planning the specific information items (information products, documentation) to be developed and revised during systems and software life cycles and service processes. It... | |
| ISO/IEC/IEEE 16326:2009 provides normative content specifications for project management plans covering software projects, and software-intensive system projects. It also provides detailed discussion and advice on applying a set of project... | |
| It defines the functions that are to be performed by a transducer interface module (TIM) and the common characteristics for all devices that implement the TIM. It specifies the formats... | |
| It is the purpose of this Recommended Practice to define acceptable methods of testing electrical insulation in flight electric equipment. Test procedures are recommended for inspection of equipment electrical insulation... | |
| Looking at the problem from an overall standpoint, the grounding of the system would in most cases be done by making a metallic connection direct or through an impedance between... | |
| Many definitions in this standard are applicable to devices other than electron tubes especially semiconductor devices. These definitions have been made as general as possible, but it should always be... | |
| Measures for improving the lightning protection performance of schemes applied to overhead power distribution lines are discussed in this guide. | |
| Method for defining the electrical load supplied by a nickel-cadmium battery and for sizing the battery to supply that load is described in this recommended practice. | |
| Methods, techniques, and designs to mitigate bird-related power interruptions and equipment damage resulting from avian interactions with electric facilities are covered in this document. This document addresses electrocutions, collisions, nesting... | |
| Minimum structural requirements for structural supports used for overhead contact systems for heavy rail, light rail, and trolley bus systems, including loading, safety factors, and deflection are provided by this... | |
| Monitoring and measurement of battery parameters is an important element of maintaining a fully operational battery system. This guide presents and discusses measurable parameters of batteries used in stationary battery... | |
| Motor Vehicle Event Data Recorders (MVEDRs) collect, record, store and export data related to motor vehicle pre-defined events. This standard defines a protocol for MVEDR output data compatibility and export... | |
| Motors used to drive valve operators in nuclear power-generating stations are discussed. Guidelines to evaluate the adequacy of motors used to drive valve operators; to provide recommendations for motor application; | |
| Multi-channel operation is an extension to the IEEE 802.11 WAVE mode that describes how to support a multi-channel system with the IEEE 802.11 medium access control (MAC) and physical layers... | |
| Multi-channel operation is an extension to the IEEE 802.11™ WAVE mode that describes how to support a multi-channel system with the IEEE 802.11 medium access control (MAC) and physical layers... | |
| Multi-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control (MAC), and physical layers (PHYs), including parameters for priority access, channel switching and routing, management services,... | |
| Multi-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control (MAC), and physical layers (PHYs), including the operation of control channel (CCH) and service channel (SCH)... | |
| Multi-channel wireless radio operations, Wireless Access in Vehicular Environments (WAVE) mode, medium access control, and physical layers, including parameters for priority access, channel switching and routing, management services, and primitives... | |
| Names and letter symbols for prefixes that denote multiplication of a unit by the binary multiplier 2/sup 10n/, where n = 1, 2, 3, 4, 5, or 6 are defined. | |
| Names and letter symbols for prefixes that denote multiplication of a unit by the binary multiplier 210n, where n = 1, 2, 3, 4, 5, or 6 are... | |
| On-board devices/systems, with crashworthy memory, that record data to support accident/incident analysis for rail transit vehicles are covered. The requirements of this standard are limited to event recorder functions and... | |
| On-board devices/systems, with crashworthy memory, that record data to support accident/incident analysis for rail transit vehicles, are covered. The requirements of this standard are limited to event recorder functions and... | |
| Operational parameters that may be observed by battery monitoring equipment used in stationary applications and the relative value of such observations are discussed in this guide. Although a list of... | |
| Organizational reliability capability and the identification of the criteria for assessing the reliability capability of an organization are defined. | |
| Perferred voltage ratings above 230 kV nominal for alternating-current (ac) systems and equipment are provided, along with definitions of various types of system voltages. | |
| Performance and functional requirements for a communications-based train control (CBTC) system are established in this standard. A CBTC system is a continuous, automatic train control system utilizing high-resolution train location... | |
| Portable/benchtop test equipment applications are supported in this document by defining a mass interconnection scheme and pin configuration based upon IEEE Std 1505(TM)-2010 and IEEE Std 1505.1(TM)-2015. Particular emphasis has... | |
| Possible adverse impacts to an operating overhead transmission line which might occur when operating the line at high temperatures are discussed. Specifically, the transmission lines conductor, connectors, and attached accessories... | |
| Promoting and facilitating interoperability between components of automatic test systems where test results and/or maintenance actions need to be shared is addressed in this standard. The standard defines the common... | |
| Promoting and facilitating interoperability between components of automatic test systems where test results need to be shared is addressed in this standard. The standard thus facilitates the capture of test... | |
| Promoting and facilitating interoperability components of automatic test systems where actions taken during maintenance need to be shared is addressed in this standard. The standard thus facilitates the capture of... | |
| Protocols and test procedures are specified for the measurement of the peak spatial-average SAR induced inside a simplified model of the head of users of certain handheld radio transceivers. These... | |
| Provides guidance for determining the hottest-spot temperature in distribution and power transformers built in accordance with IEEE Std C57.12.00-2000. Describes the important criteriato be evaluated by any thermal model that... | |
| Quality requirements for software packages and instructions on how to test a softwarepackage against these requirements are established. The requirements apply to software packagesas they are offered and delivered, not... | |
| Radio Transmitters: Definitions of Terms | |
| Rail transit vehicle passenger information system interfaces with the vehicle's carbody, train crew, control system, power system, and passengers are described in this standard. The physical, logical, and electrical interfaces... | |
| Reaffirmed 2004 Recommendations for the connection of a gas-insulated substation to another gas-insu- lated substation of a different make are given. | |
| Reaffirmed March 2010. A set of metrics and methods to enable consistent measurement of the components of timing interval error in video synchronization signals is provided. By partitioning the spectra... | |
| Reaffirmed September 22, 2005 Motors used to drive valve operators in nuclear power generating stations are discussed. Guidelines to evaluate the adequacy of motors used to drive valve operators; to... | |
| Recommendations and guidance for distributed resources (DR) interconnected on the distribution secondary networks, including both spot networks and grid networks, are provided. This document gives an overview of distribution secondary... | |
| Recommendations provide guidance in the implementation of the generic standard IEEE Std 1301-1991, and the connector-related standards, such as IEEE Std 1301.1-1991 and IEEE Std 1301.3-1992. This recommended practice may... | |
| Recommended methods and standardized reporting practices for electrical characterization of carbon nanotubes (CNTs) are covered. Due to the nature of CNTs, significant measurement errors can be introduced if the electrical... | |
| Recommended methods and standardized reporting practices for electricalcharacteri zation of printed and organic ring oscillators are covered. Due to the nature of printedand organic circuits, significant measurement errors can be... | |
| Recommended practices for communication and interoperation of devices connected on an electric power substation Internet Protocol (IP) network are provided. An introduction to the concepts that need to be mastered... | |
| Recommended practices for communication and interoperation of devices connected on an electric power substation Internet protocol (IP) network are provided. For the power engineer new to IP networking, this document... | |
| Recommended practices for specifying Thyristor-Controlled Series Capacitor (TCSC) installations used in series with transmission lines are provided. Ratings for TCSC thyristor valve assemblies, capacitors, and reactors as well as TCSC... | |
| Recommended practices for the engineering and design of flexible and rigid bus connections for bus and equipment in electric power substations located in seismically active areas are provided in this... | |
| Replaced by IEC 61588-2004 (SH95292 or SS95292) Dual-logo document Abstract: A protocol to synchronize independent clocks running on separate nodes of a distributed measurement and control system to a high... | |
| Replaced by IEC 62526 Ed. 1 (2007-11).Standard Test Interface Language (STIL) provides an interface between digital test generation tools and test equipment. Extensions to the test interface language (contained in... | |
| Replaced by ISO/IEC/IEEE 29148:2011. The format and contents of a concept of operations (ConOps) document are described. AConOps is a user-oriented document that describes system characteristics for a proposed system... | |
| Requirements are given for single or multiconductor cables, with or without metal armor and/or jacket, and rated 300 V to 35 kV, intended to be installed aboard marine vessels, fixed... | |
| Requirements are presented for subracks, plug-in units, printed boards, and backplanes to be used in conjunction with IEEE Std 1301-1991 and with a 2 mm connector as defined in EIA... | |
| Requirements for a software developer's quality management system are established. Each of the elements of a quality management system to be designed, developed, and maintained by the developer are identified,... | |
| Reuse of test data and test structures developed for individual cores (designs) when integrated into larger integrated circuits is required for system-on-chip (SoC) tests. This standard defines language constructs sufficient... | |
| Revised by IEEE Std 1512.1-2006 The exchange of vital traffic management data and data to support traffic management decisions, between the Traffic Management Center and other agencies involved in transportation-relat... | |
| Revision of IEEE Std 1512.1-2003 This standard addresses the exchange of vital data about public safety and emergency management issues involved in transportation-relat ed events, through common incident management message... | |
| Revision of IEEE Std 1512.3-2002. This standard addresses the exchange of vital data about public safety issues involved in transportation-relat ed events, through common incident management message sets. The message... | |
| Revision of IEEE Std 16-1955. This standard is intended to provide a set of uniform design, application, and test requirements for electrical and electronic control apparatus on rail vehicles. | |
| Revision of ISO/IEC 15288-2004. This International Standard was jointly developed by ISO/IEC and IEEE. This International Standard establishes a common process framework for describing the life cycle of man-made systems. | |
| Scalable Coherent Interface (SCI), specified in IEEE Std 1596-1992, provides computer-bus-like services but uses a collection of fast point-to-point links instead of a physical bus in order to reach far... | |
| Secure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods to secure WAVE management messages and methods to secure application messages are defined... | |
| Secure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods to secure WAVE management messages and methods to secure application messages are defined. | |
| Secure message formats, and the processing of those secure messages, within the DSRC/WAVE system are defined. The standard covers methods for securing WAVE management messages and application messages, with the... | |
| Security issues related to human intrusion upon electric power supply substations are identified and discussed. Various methods and techniques presently being used to mitigate human intrusions are also presented in... | |
| Service conditions, electrical ratings, thermal ratings, and environmental testing requirements are defined for communications networking devices to be installed in electric power substations. This standard establishes a common reproducible basis... | |
| Services and protocol elements that permit the exchange of management information between stations attached to ISO/IEC standard local and metropolitan area networks are defined.The standard includes the specification of managed... | |
| Services to WAVE devices and systems are provided in IEEE Std 1609.3(TM), IEEE Standard for Wireless Access in Vehicular Environments (WAVE)—Networking Services. Layer 3 and layer 4 of the open... | |
| Services to WAVE devices and systems are provided in IEEE Std 1609.3(TM), IEEE Standard for Wireless Access in Vehicular Environments (WAVE)--Networking Services. Layer 3 and layer 4 of the open... | |
| Several errors in IEEE Std 1609.3-2010 related to Gateway MAC Address, EDCA Parameter Set, and 3DLocationAndConfide nce fields are addressed in this corrigendum. | |
| Specification and test requirements for a single-axis Coriolis vibratory gyro (CVG) for use as a sensor in attitude control systems, angular displacement measuring systems, and angular rate measuring systems are... | |
| Specifications of common public key cryptographic techniques based on hard problems over lattices supplemental to those considered in IEEE Std 1363-2000 and IEEE Std 1363a-2004, including mathematical primitives for secret... | |
| Specifications that should be provided to characterize instrumentation used to measure the steady state rms value of magnetic and electric fields with sinusoidal frequency content in the range 10 Hz... | |
| Specified in this recommended practice are how the elements and attributes defined in the Open Archives Initiative Object Reuse and Exchange (OAI-ORE) Abstract Model and expressed in the OAI-ORE Resource... | |
| Specified in this recommended practice is how the elements and attributes defined in the IMS Content Packaging Information Model (CP) Version 1.2 relate to the components of the conceptual model... | |
| Standard Docs | |
| Standard Test Interface Language (STIL) provides an interface between digital test generation tools and test equipment. A test description language is defined that: (a) facilitates the transfer of digital test... | |
| Standardized definition of terms commonly in the field of electrical networks and filters. | |
| Superseded by 145-1993. Definitions of terms in the field of antennas are provided. | |
| SUPERSEDED BY 1474.1-2004 Abstract: Performance and functional requirements for a communications-based train control (CBTC) system are established in this standard. A CBTC system is a continuous, automatic train control system... | |
| Superseded by IEC/IEEE 62142-2005. To develop a standard syntax and semantics for Verilog RTL synthesis. This standard shall define the subset of IEEE 1364 (Verilog HDL) which is suitable for... | |
| Superseded by IEC/IEEE 62265-2005. ALF shall serve as the data specification language of library elements for design applications used to implement integrated circuits. The range of abstraction shall include from... | |
| Superseded by IEEE 1410-2004. This guide will identify factors that contribute to lightning-caused faults on overhead distribution lines and suggest improvements to existing and new constructions. This guide is limited... | |
| Superseded by IEEE Std 1366-2003. Useful distribution reliability indices, and factors that affect their calculation, are identi-fied. This guide includes indices that are useful today as well as ones that... | |
| Superseded by IEEE Std 1407-2007. Accelerated aging tests on extruded medium-voltage cables using water-filled tanks are addressed. Information on the equipment, cable samples, test conditions, and measurements to perform the... | |
| Superseded by IEEE Std 142-2007 (Green Book). This IEEE Standars product is part of the Color Books family. The problems of system grounding, that is, connection to ground of neutral,... | |
| Superseded by IEEE Std 1512-2006. This standard will be a base standard for Incident Management message sets which will be used by all response and/or dispatch centers such that the... | |
| Superseded by IEEE Std 1512.3-2006 This standard addresses the exchange of vital data about hazardous material and other cargo and contents of vehicles and buildings involved in transportation-relat ed events,... | |
| Superseded by IEEE Std C57.12.37-2006 A basis for the electronic reporting of transformer test data on liquid immersed distribu-tion transformers as defined in the ANSI C57.12.2X standards series is provided. | |
| Superseded by ISO/IEC/15288:2008(E ) (IEEE Std 15288-2008). IEEE adoption of ISO/IEC Std 15288-2002. This standard establishes a common framework for describing the life cycle of systems created by humans. It... | |
| Superseded by ISO/IEC/IEEE 21451-7-2011. Data formats designed to facilitate communications between radio frequency identification (RFID) systems and smart RFID tags with integral transducers (sensors and actuators) are introduced in this... | |
| Superseded. IEEE Recommended Practice for Minimization of Interference from Radio-Frequency Heating Equipment, describes procedures that may be applied in the design and construction of radio-frequency heating equipment used for heating... | |
| Supersedes 1364-1995. The Verilog(R) Hardware Description Language (HDL) is defined in this standard. Verilog HDL is a formal notation intended for use in all phases of the creation of electronic... | |
| Supersedes IEEE Std 1490-1998 SUMMARY: IEEE Std 1490-2003 is an adoption, in its entirety, of A Guide to Project Management Body of Knowledge (PMBOK® Guide). Project scope: The primary purpose... | |
| Supplemental information for a high-speed serial bus that integrates well with most IEEE standard 32-bit and 64-bit parallel buses is specified. It is intended to extend the usefulness of a... | |
| System Administration Interface/User and Group Administration for Computer Operating System Environments, is part of the POSIX®series of standards for applications and user interfaces to open systems. The purpose of this... | |
| System design considerations, information display and control techniques for use with computer-based displays, and human factors engineering guidance for the use of these techniques in nuclear power generating stations are... | |
| System extensions consistent with the implementation and functionality of IEEE Std 1284-2000 are covered. Multiport expansion architectures, daisy chains, an application and device driver programming interface architecture, and data link... | |
| Technical background and application details to support understanding of IEEE Std 1547-2003 are provided. The guide facilitates the use of IEEE Std 1547-2003 by characterizing various forms of distributed resource... | |
| Techniques for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which employees could be exposed during their work on or near... | |
| Techniques for objective measurement of electroacoustic and voice switching characteristics of analog and digital handsfree telephones (HFTs) are provided. Due to the various characteristics of HFTs and the environments in... | |
| Terminology and test methods to clearly document prevalent world-wide terms used to describe and test digital-to-analog converters (DACs) are provided. It is restricted to monolithic, hybrid, and module DACs and... | |
| Terms and definitions relating to aided and unaided inertial systems for navigation, guidance, orientation, stabilization, and related applications are presented. Usage as understood by the inertial systems community is given... | |
| Test equipment, data acquisition equipment, instrumentation, test facilities, and data analysis techniques used in inertial sensor testing are described in this recommended practice. An errata for this standard is available... | |
| Test equipment, data acquisition equipment, instrumentation, test facilities, and data analysis techniques used in inertial sensor testing are described in this recommended practice. | |
| Test methods that may be used to test conformance to IEEE Std 1327- 1993, IEEE Standard for Information Technology--Open Systems Interconnection (OSI) Abstract Data Manipulation C Language Interfaces--Binding for Application... | |
| Test procedures for evaluating the physical characteristics of cable cleaning solvents and their compatibility with extruded dielectric cable components and cable accessories (joints and terminations) are provided in this guide. | |
| The areas of recommended knowledge for installers and maintainers of stationary batteries and related systems, to the extent that they affect the battery, are defined in this recommended practice. Design... | |
| The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. This guide gives methods for insulation coordination of different air-insulated systems like transmission lines... | |
| The clause that addresses direct measurement with fiber-optic detectors is expanded and an annex detailing examples of installation techniques for fiber-optic probes is added in this amendment. | |
| The communication protocol described by IEEE Std 1149.1 (Standard Test Access Port and Boundary-Scan Architecture) has been adopted by this standard for providing standardized programming access and methodology for programmable... | |
| The communication protocol described by IEEE Std 1149.1 TM -2001 (Standard Test Access Port and Boundary-Scan Architecture) has been adopted by this standard for providing standardized programming access and methodology... | |
| The communication protocol described by IEEE Std 1149.1-2001 (Standard Test Access Port and Boundary-Scan Architecture) has been adopted by this standard for providing standardized programming access and methodology for programmable... | |
| The concept of integrity levels with corresponding integrity level requirements that arerequired to be met in order to show the achievement of the integrity level are specified in thisadoption of... | |
| The coordination of design, material supply, installation, and test procedures required for the connection of a gas-insulated substation (GIS) is described. Preferred dimensions for mechanical and electrical interchangeability for voltage... | |
| The Core Test Language (CTL) is a language created for a System-on-Chip flow (or SoC flow), where a design created by one group is reused as a sub-design of a... | |
| The data and rationale for translating head and torso simulator measurements from eardrum to other acoustic reference points such as free field and diffuse field are provided in this standard. | |
| The design and application of dc surge arresters to protect dc electrification system from transient overvoltage caused by lightning and switching surges is the purpose of this standard. Lightning surges... | |
| The design requirements for a fiber-optic serial interconnect protocol, topology, and media is established. The application target for this standard is the interconnection of multiple aerospace sensors, processing resources, bulk... | |
| The design, equipment applicability, and hardware installation of electrically safe, stand- alone, and grid-connected PV power systems operating at less than 50 kW output are addressed. Storage batteries and other... | |
| The design, manufacturing, and testing unique to the application of uncontrolled semiconductor power rectifiers for direct current (dc) supplied transportation substation applications up to 1500 V dc nominal output is... | |
| The document structure and notation are described, and the objectives and scope of the CSR Architecture are outlined. Transition set requirements, node addressing, node architectures, unit architectures, and CSR definitions... | |
| The e functional verification language is an application-specific programming language, aimed at automating the task of verifying a hardware or software design with respect to its specification. Verification environments written... | |
| The e functional verification language is an application-specific programming language, aimed at automating the task of verifying an electronic design with respect to its specification. Verification environments written in e... | |
| The electrical interfaces among the components comprising the auxiliary power systems and their electrical interface with other train-borne systems are described. As such, this standard treats the auxiliary power system... | |
| The engineering and design of flexible bus connections for bus and equipment in electric power substations is described. This recommended practice gives guidance to the substation engineer who is unfamiliar... | |
| The expanding use of digital communications among subsystems of the transportation infrastructure has spawned the development of data dictionaries for the communications between these subsystems. A format for intelligent transportation... | |
| The expanding use of digital communications among subsystems of the transportation infrastructure has spawned the development of message sets for the communications between these subsystems. A format for Intelligent Transportation... | |
| The framework for the reliability prediction for electronic hardware is covered in this standard. This standard identifies required elements for an understandable and credible reliability prediction with information to evaluate... | |
| The framework for the reliability prediction process for electronic systems and equipment, including hardware and software predictions at all levels, is covered. | |
| The general characteristics of pantographs that enable current collection from anoverhead contact system on light rail and heavy rail transit systems are described. Definitionspertinent to pantographs, including general definitions, specific... | |
| The general requirements and test methods for measuring conformance to POSIX standards are defined. This document is aimed primarily at working groups developing test methods for POSIX standards, developers of... | |
| The grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation treatments required for solid and resistance grounding methods are covered in this... | |
| The guide is based on industry practices, and guidelines for installation, maintenance and operation of irrigation equipment near or under power lines as they pertain to minimum distance to energized... | |
| The high level architecture (HLA) has been developed to provide a common architecture for distributed modeling and simulation. The HLA defines an integrated approach that provides a common framework for... | |
| The High Level Architecture (HLA)Framework and Rules is the capstone document fora family of related HLA standards. It defines the HLA, its components, and the rules that outline theresponsibilities of... | |
| The High Level Architecture (HLA)Object Model Template (OMT) specification defines the format and syntax (but not content) of HLA object models. Simulations are abstractions of the real world, and no... | |
| The IEEE Standard for Software Documentation for Rail Equipment and Systems is presented. This standard establishes the minimum requirements for application software documentation throughout the software development life cycle for... | |
| The information content and the data formats for the interchange of digital test program data between digital automated test program generators (DATPGs) and automatic test equipment (ATE) for board-level printed... | |
| The interfaces between and among functional systems on rail 1 rapid transit vehicles are prescribed. The systems themselves are treated as "black boxes;" requirements for the input signals and the... | |
| The interfaces between and among functional systems on rail rapid transit vehicles is prescribed. The systems themselves are treated as "black boxes;" requirements for the input signals and the output... | |
| The logical and physical interfaces and the performance attributes for the interface between the rail subsystem and the highway subsystem at a highway rail intersection are defined in this standard. | |
| The main emphasis of this recommended practice is the engineering design of optical fiber communication facilities serving, or connected to, electric supply locations. This document includes methods for providing telecommunication... | |
| The methods for assessing and predicting the reliability of software, based on a life-cycle approach to software reliability engineering (SRE), are prescribed in this recommended practice. It provides information necessary... | |
| The metric mechanical coordination of microcomputer components, including the cabinet, rack, subracks, printed boards, and common connector-dependent dimensions for connector pitches of 2.5, 2.0, 1.5, 1.0, and 0.5 mm is... | |
| The minimal set of information about assets that reuse libraries should be able to exchange to support interoperability is provided. | |
| The minimum tests and inspections required to evaluate photovoltaic concentrating modules, and a common approach (e.g., between producer and purchaser) in conducting qualification tests are provided. | |
| The model, definition, and behaviors of High Performance Serial Bus bridges, which are devices that can be used to interconnect two separately enumerable buses, are specified. | |
| The needs and requirements specific to the design, procurement, construction, maintenance, and operation of a microwave system are addressed. Steps for a variety of applications have been included in this... | |
| The operation, functions, and attributes of a parallel system bus (PSB), called MULTIBUS II, are defined. A high- performance backplane bus intended for use in multiple-microproces sor systems, the PSB... | |
| The performance of optical current and voltage measurement systems used in the generation, transmission, and distribution of alternating current electricity, and to assist in the proper selection of such equipment... | |
| The PMI standard, A Guide to the Project Management Body of Knowledge (PMBOK(R) Guide)--Fourth Edition, is adopted in this standard. (NOTE: This standard is longer available for purchase) | |
| The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and... | |
| The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which... | |
| The processes and procedures that should be followed by users of the High Level Archi-tecture (HLA) to develop and execute federations are defined in this recommended practice. Thisrecommended practice is... | |
| The purpose and content of all identified systems and software life cycle and service management information items (documentation) are specified in this document. The information item contents are defined according... | |
| The purpose and content of all identified systems and software life cycle and service management information items (documentation) are specified in this standard. The information item contents are defined according... | |
| The purpose of the IEEE 1512 Implementation Guide is to provide guidelines for and assistance with the implementation process of IEEE Std 1512. This guide presents information and examples on... | |
| The purpose of this guide is to provide general recommendations for consideration when designing new overhead transmission lines that will be operated at high temperatures. It may also evaluate existing... | |
| The purpose of this standard is to establish performance and testing specifications for hardware used on WRAP CABLE systems in order to standardize testing, simplify procurement specifications, and assure product... | |
| The requirements for technical reviews and audits to be performed throughout the acquisition life cycle for the US Department of Defense (DoD) and other defense agencies are established in this... | |
| The requirements for the application of ISO/IEC/IEEE 15288, System Life Cycle Processes for defense systems engineering needs are provided in this standard. This standard implements ISO/IEC/IEEE 15288 for use by... | |
| The scalable coherent interface (SCI) provides computer-bus-like services but, instead of a bus, uses a collection of fast point-to-point unidirectional links to provide the far higher throughput needed for high-performance... | |
| The specification and test requirements for a linear, single-axis, nongyroscopic accelerometer for use in inertial navigation, guidance, and leveling systems are defined. A standard specification guide and a compilation of... | |
| The specification and test requirements for a linear, single-axis, nongyroscopic accelerometer for use in internal navigation, guidance, and leveling systems are defined. A standard specification guide and a compilation of... | |
| The standard defines analog computing terms from absolute value circuit to zero error reference. Each term is accompanied by a paragraph of definitive text. Significant cross referencing is given. | |
| The standard interface for hardware description models of electronic components is defined. The primary audiences of this standard are model developers and implementers of software supporting this interface. | |
| The standard presents definitions of digital computing terms avoiding programming and analog terminology. Each term is accompanied by definitive text and cross referencing.<> | |
| The STIL environment supports transferring tester-independent test programs to a specific ATE system. Although native STIL data are tester independent, the actual process of mapping the test program onto tester... | |
| The subset of the Project Management Body of Knowledge that is generally accepted is identified and described in this guide. Generally accepted means that the knowledge and practices described are... | |
| The synchronizing input and the data output for phasor measurements made by substation computer systems is discussed. Processes involved in computing phasors from sampled data, data-to-phasor conversions, and formats for... | |
| The technical specifications for, and testing of, the interconnection and interoperability between utility electric power systems (EPSs) and distributed energy resources (DERs) are the focus of this standard. It provides... | |
| The telephone network interface to a telemetry interface unit operating under the utility telemetry service architecture is described. The interface is described in terms of a utility meter reading application,... | |
| The telephone network interface to a utility controller operating under the utility telemetry service architecture is described. The interface is described in terms of a utility meter reading application but... | |
| The test parameters and acceptance criteria for voltage-endurance testing of form-wound bars and coils for use in large hydrogenerators are covered in this standard. | |
| The various important aspects that need to be considered for satisfactory long-term performance of room-temperature vulcanizing (RTV) silicone rubber high-voltage insulator coatings (HVIC) are outlined in the guide. Methods of... | |
| The Verilog hardware description language (HDL) is defined in this standard. Verilog HDL is a formal notation intended for use in all phases of the creation of electronic systems. Because... | |
| The Verilog Hardware Description Language (HDL) is defined. Verilog HDL is a formal notation intended for use in all phases of the creation of electronic systems. Because it is both... | |
| The wireless access in vehicular environments (WAVE) architecture and services necessary for WAVE devices to communicate in a mobile vehicular environment are described in this guide. It is meant to... | |
| This amendment adds information pertaining to motor vehicle event data recorderconnector lockout apparatus (MVEDRCLA) by revision. | |
| This amendment adds requirements to IEEE Std 1613-2003 relating to the altitude of installed communications networking devices, and the derating factors for dielectric power frequency tests and rated maximum ambient... | |
| This amendment clarifies requirements and explains the rationale for transient test requirements with the addition of one definition, dc power supply requirements (5.1), and Annex E - History. | |
| This amendment to IEEE Std 1657-2009 modifies Clause 5 as well as related annexes, and adds a new annex, primarily consisting of a flowchart that guides the user in the... | |
| This amendment was prepared in response to IEEE Std 1547a(TM), Amendment 1 to IEEE Std 1547(TM)-2003 providing revisions to Clause 4.1.1 Voltage regulation, Clause 4.2.4 Frequency, and Clause 4.2.3 Voltage. | |
| This corrigendum clarifies and corrects technical errors, editorial errors, and omissions in IEEE Std 1484.12.1-2002. | |
| This corrigendum corrects errors in IEEE Std 1609.3(TM)-2010 in the following areas: References to current documents including IEEE Std 1609.0TM, IEEE Std 1609.2TM, IEEE Std 1609.12TM, IEEE P1609.6TM; and Requests... | |
| This corrigendum corrects errors in IEEE Std 1609.4 TM -2010 in the following areas: References to current documents including IEEE Std 1609.0(TM), IEEE Std 1609.2(TM), IEEE Std 609.12(TM), and IEEE... | |
| This document defines assurance-related terms and establishes an organized set of concepts and their relationships, thereby establishing a basis for shared understanding of the concepts and principles central to all... | |
| This document describes equipment inspection and radio frequency (rf) electromagnetic field measurement procedures for evaluation of rf industrial, scientific, and medical (ISM) equipment installed in the user's facility. The term,... | |
| This document describes the concepts necessary and appropriate for Networks of Interoperating Reuse Libraries (NIRLs). The purpose is to provide a context for standardization efforts toward the goal of supporting... | |
| This document provides an elaboration of the measurement process from ISO/IEC 15288 and ISO/IEC 12207. The measurement process is applicable to system and software engineering and management disciplines. The process... | |
| This document provides an implementation-indep endent specification for a software interface to information systems containing data pertinent to the diagnosis and maintenance of complex systems consisting of hardware, software, or... | |
| This document provides definitions of electric power to quantify the flow of electrical energy in single-phase and three-phase circuits under sinusoidal, non-sinusoidal, balanced, and unbalanced conditions. | |
| This document provides general guidelines for the preparation of a functional specification for solid-state electronic shunt devices used mainly for compensation of voltage fluctuation. The guide covers devices rated to... | |
| This document provides in compact form recommendations and technical reasons for the selection, design and application of aircraft electric power systems and electrically-actuate d load equipment, without going into specific... | |
| This document specifies an exchange format, using XML, for identifying all of the hardware, software, and documentation associated with a unit under test (UUT). This UUT may be tested and... | |
| This glossary reprinted from Proc. IRE (USA) vol.48, no.9, Sept.1960 contains 29 definitions with footnotes mostly related to the concepts of branches, graphs, loops, nodes and paths. Two alternative algebraic... | |
| This guide adopts ISO/IEC TR 14471:2007. Since computer-aided software engineering (CASE) adoption is a subject of the broader technology transition problem, this guide addresses the adoption practices appropriate for a... | |
| This guide applies to the process of investigating, evaluating, and analyzing field failures. This guide covers the overall format for failure analysis and subsequent guides will specifically address cables, joints,... | |
| This guide covers specific methods of failure mode classifications and analysis for shielded power cables rated 5 kV through 46 kV. | |
| This guide defines methods of measuring partial discharges that may occur in energized power switchgear apparatus in flaws, voids, and interfaces of nonself-restoring insulation that may then result in dielectric... | |
| This guide establishes typical dimensions for connections of a gas-insulated substation (GIS) to extruded, self contained fluid-filled, and high pressure fluid-filled (pipe-type) cables in single and three phase arrangements for... | |
| This guide is applicable to all stand-alone photovoltaic (PV) systems where PV is the only charging source. Stand-alone photovoltaic (PV) system parameters and operating conditions are discussed in relation to... | |
| This guide is applicable to all stand-alone photovoltaic (PV) systems where PV is the only charging source. Stand-alone PV system parameters and operating conditions are discussed in relation to battery... | |
| This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e.,... | |
| This guide is applicable to wildlife protective products installed on overhead electrical distribution systems rated up to and including 38 kV. Test recommendations regarding these products that are in direct... | |
| This guide is intended for cables designed for use in power generating stations and industrial facilities, in both the outside plant environment and indoor applications - the latter with adequate... | |
| This guide is intended to facilitate the interoperability of distributed resources (DR) and help DR project stakeholders implement monitoring, information exchange, and control (MIC) to support the technical and business... | |
| This guide provides a summary of the methods for detection, mitigation, and control of concentric neutral corrosion in medium-voltage, unjacketed, underground distribution cable installed direct buried or in conduit. The... | |
| This guide provides information on the differences between stationary standby and stationary cycling applications and appropriate battery management strategies in cycling operations. While the primary emphasis is on lead-acid batteries,... | |
| This guide provides information on the equipment, cable specimens, test conditions, and measurements to perform accelerated aging tests on medium-voltage cables using water-filled tanks, whether the test be a time... | |
| This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source... | |
| This guide provides maintenance testing and failure analysis guidance for form-wound, squirrel cage, induction machinery rated up to 15 kV. It addresses the following machine systems: Stator (Winding and Core)... | |
| This guide provides mathematical models for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which workers could be exposed during their... | |
| This guide provides technical information regarding factors that can affect the life of an impregnated paper-insulated transmission cable system, and it reviews available methods to evaluate the remaining life of... | |
| This guide provides techniques for designers and facility operators to apply in determining the arc flash hazard distance and the incident energy to which employees could be exposed during their... | |
| This guide was developed to assist individuals, organizations, and suppliers with the application of motors in Class I, Division 2 locations, where flammable gases and vapors may occasionally be present. | |
| This guide, covering three-phase ac systems from 1 kV to 800 kV, provides recommended electrical operating and safety clearances and insulation levels in air-insulated electric supply substations; addresses insulation coordination... | |
| This IEEE guide suggests surge arrester installation methods at distribution cable terminal poles in order to minimize the total impressed transient voltage on medium-voltage distribution cables. Grounding electrode techniques, pole... | |
| This IEEE Standards product is part of the 1516 family on Computer Simulation/Modeling & Simulation High Level Architecture. Abstract: The High Level Architecture (HLA) Object Model Template (OMT) specification defines... | |
| This IEEE Standards product is part of the Color Books family. A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an... | |
| This International Standard defines a measurement process applicable to system and software engineering and management disciplines. The process is described through a model that defines the activities of the measurement... | |
| This International Standard describes in greater detail management of the Maintenance Process described in ISO/IEC 12207, including Amendments. This International Standard also establishes definitions for the various types of maintenance. | |
| This International Standard establishes a common framework for describing the life cycle of systems created by humans. It defines a set of processes and associated terminology. These processes can be... | |
| This International Standard establishes a common process framework for describing the life cycle of man-made systems. It defines a set of processes and associated terminology for the full life cycle,... | |
| This International Standard establishes a common process framework for describing the lifecycle of man-made systems. It defines a set of processes and associated terminology for the full life cycle, including... | |
| This International Standard is based on the life-cycle processes specified in ISO/IEC 12207:2008 (IEEE Std12207-2008), Systems and software engineering Software life cycle processes; ISO/IEC 15288:2008 (IEEEStd 15288-2008), Systems and software... | |
| This International Standard provides a set of tools with which to implement a Futurebus+¨ architecture. This high-performance bus-based system architecture provides a wide range of performance and cost scalability over... | |
| This is a standard for definitions used for measurement of electric power quantities under sinusoidal, non-sinusoidal, balanced, or unbalanced conditions. It lists the mathematical expressions that were used in the... | |
| This procedure is intended for form-wound bars/coils for rotating machines rated 10 kV or more at 50 Hz or 60 Hz that are subjected to many transitions from no-load to... | |
| This recommended practice defines many common parameters for ac-dc and dc-dc electronic power distribution components and subsystems. This enables electronic system engineers, manufacturers, and researchers to speak with a common... | |
| This recommended practice defines the areas of recommended knowledge for installers and maintainers of stationary batteries and related systems to the extent that they affect the battery. Design of the... | |
| This recommended practice defines the processes and procedures that should be followed to implement Verification, Validation, and Accreditation (VV&A) for federations being developed using the High Level Architecture (HLA) Federation... | |
| This recommended practice describes the process of the measurement of the radar cross section of objects using a test range. The term radar cross section is defined, and the characteristics... | |
| This recommended practice develops an XML application defining a standard language for symbolic music representation. The language is a meta-representation of music information for describing and processing said music information... | |
| This recommended practice establishes appropriate electromagnetic (EM) threat levels, protection methods, monitoring techniques, and test techniques for specific classes of computer equipment. This equipment is expected to be accessible to... | |
| This recommended practice facilitates the creation, management and delivery of digital content for eLearning by technology that implements Digital Rights Expression Languages (DRELs). This recommended practice determines what, if any,... | |
| This recommended practice for communications-based train control (CBTC) system design and functional allocations builds on IEEE Std 1474.1 by decomposing each identified automatic train protection, automatic train operation and automatic... | |
| This recommended practice is a companion document for IEEE Std 1597.1-2008. Examples and problem sets to be used in the validation of computational electromagnetics (CEM) computer modeling and simulation techniques,... | |
| This Recommended Practice presents engineering design procedures for the electrical protection of optical fiber communication facilities serving, or connected to, electric supply locations. Other telecommunication alternatives, such as radio and... | |
| This recommended practice presents tests to determine the performance of stand-alone photovoltaic (PV) systems and for verifying PV system design. These tests apply only to complete systems with a defined... | |
| This recommended practice provides a set of guidelines that can be used by the operators of new start-up systems seeking guidance in developing manuals, methods, practices, and procedures for the... | |
| This recommended practice provides a standardized body of theory, techniques, and procedures for measuring the spectral characteristics of 8-VSB transmitters used for terrestrial transmission of digital television (DTV) in the... | |
| This recommended practice specifies how the elements and attributes defined in Multimedia Framework (MPEG-21) -Part 2: Digital Item Declaration relate to the components of the conceptual model for resource aggregation... | |
| This recommended practice specifies how the elements and attributes defined in the Atom Syndication Format (Atom) relate to the components of the conceptual model for resource aggregation defined in IEEE... | |
| This recommended practice specifies how the elements and attributes defined in the Metadata Encoding and Transmission Standard (METS) relate to the components of the conceptual model for resource aggregation defined... | |
| This standard addresses the exchange of vital data about public safety and emergency management issues involved in transportation-relat ed events, through common incident management message sets. The message sets specified... | |
| This standard addresses the exchange of vital data about public safety issues involved in transportation-relat ed events, through common incident management message sets. Message sets specified are consistent with the... | |
| This standard adopts ISO/IEC 14102:2008 and defines both a set of processes and a structured set of computer-aided software engineering (CASE) tool characteristics for use in the technical evaluation and... | |
| This standard applies to AC adjustable speed drive (ASD) systems rated over 375 kW and above 750 V output voltage as used in petrochemical and similar applications. It covers the... | |
| This standard comprises test procedures for the measurement of antenna properties. It is a comprehensive revision of the previous test procedure ANSI/IEEE Std 149-1965. It is assumed that the antenna... | |
| This standard covers an all-dielectric fiber optic (wrap) cable designed to be helically wrapped around a conductor or other messenger on overhead power facilities. This covers the mechanical, electrical, and... | |
| This standard covers specifications of public-key cryptographic techniques for password-based authentication and key establishment, supplemental to the techniques described in IEEE Std 1363-+-2000 and IEEE Std 1363a-+-2004. It is intended... | |
| This Standard defines a data model for describing, referencing, and sharing competency definitions, primarily in the context of online and distributed learning. This Standard provides a way to represent formally... | |
| This standard defines a mechanism for the test of core designs within a system on chip (SoC). This mechanism constitutes a hardware architecture and leverages the core test language (CTL)... | |
| This standard defines a peer-to-peer data transport (PPDT) protocol between Serial Bus devices that implement Serial Bus Protocol 2 (SBP-2). The facilities specified include device and service discovery, self-configurable (plug... | |
| This standard defines a process for evaluating and selecting a Computer Aided Software Engineering (CASE) tool for a software development or maintenance activity. The standard addresses the evaluation and selection... | |
| This standard defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with technologies such as network communication, local computing and distributed objects. The protocol is... | |
| This standard defines a wireless interface for sensors. It specifies radio-specific protocols for this wireless interface. It defines communication modules that connect the wireless transducer interface module (WTIM) and the... | |
| This Standard defines a World Wide Web Consortium (W3C) Extensible Markup Language (XML) Schema definition language binding of the learning object metadata (LOM) data model defined in IEEE 1484.12.1-2002 Standard... | |
| This standard defines an object model with a network-neutral interface for connecting processors to communication networks, sensors, and actuators. The object model containing blocks, services, and components specifies interactions with... | |
| This standard defines field testing and acceptance criteria for transportation system applications powered by a dc traction power system up to 1500 volts nominal. | |
| This standard defines how the necessary information is passed from scan insertion to pattern generation and from pattern generation to diagnosis such that different tool vendors could be used for... | |
| This standard defines secure message formats and processing for use by Wireless Access in Vehicular Environments (WAVE) devices, including methods to secure WAVE management messages and methods to secure application... | |
| This standard defines the protocol and interface that allows analog transducers to communicate digital information with an IEEE 1451 object. It also defines the format of the Transducer TEDS. The... | |
| This standard defines the test method specifications for IEEE Std 1003.b-1993 (basedon the document corresponding to the merger of IEEE Std 1003.1-1990 and IEEE Std 1003.1b-1993). The test method specifications... | |
| This Standard describes a data model to support the interchange of data elements and their values between a content object and a runtime service (RTS). It is based on a... | |
| This standard describes a method for characterizing organic electronic devices, including measurement techniques, methods of reporting data, and the testing conditions during characterization. Adopted by IEC as IEC 62860 Edition... | |
| This standard describes a method for characterizing organic electronic devices, including measurement techniques, methods of reporting data, and the testing conditions during characterization. | |
| This standard establishes criteria for design analysis for qualification, quality, and reliability of rechargeable battery systems for multi-cell mobile computing devices. It also provides methods for quantifying the operational performance... | |
| This standard establishes the metric modular order and coordination dimensions for mezzanine cards for use on host modules. | |
| This standard is concerned with measurements of the quantities which characterize a waveguide or waveguide component and the associated electromagnetic fields. The term "waveguide" as used here, is a generic... | |
| This standard is intended to promote and facilitate interoperability between components of an automatic test system (e.g., between test executive and diagnostic reasoner)where test results need to be shared. The... | |
| This standard is intended to promote and facilitate interoperability between components of automatic test systems where test results need to be shared. The standard thus facilitates the capture of test... | |
| This standard is intended to promote and facilitate interoperability between components of SIMICA. The standard defines EXPRESS information models and XML schemas that together define the common information elements supporting... | |
| This standard is intended to provide a set of uniform design, application, and test requirements for electrical and electronic control apparatus on rail vehicles | |
| This Standard is issued to supersede 58 IRE 3. SI, "IRE Standards on Audio Techniques:Definitio ns of Terms, 1958," to include the definitions of the 1958 Standards and to adddefinitions... | |
| This standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines a software packaging layout, a set of information maintained about... | |
| This standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines the Ada language bindings as package specifications and accompanying textual... | |
| This standard is the first in the 1547 series of interconnection standards and is a benchmark milestone demonstrating the open consensus process for standards development. Traditionally, utility electric power systems... | |
| This standard prescribes the maximum dimensional requirements of each battery tray for a specific number of cells and battery capacity rating. The battery hardware requirement and battery compartment are also... | |
| This standard presents definition of components in waveguide usage. These components are considered to be linear, passive, and reciprocal unless otherwise specified. The definitions included were drawn from the Institute... | |
| This standard provides specifications for a high-speed serial bus that supports both asynchronous and isochronous communication and integrates well with most IEEE standard 32-bit and 64-bit parallel buses. It is... | |
| This standard provides techniques for objective measurement of electroacoustic and voice-switching characteristics of speakerphones that connect directly or indirectly to an analog or digital telephone network. Due to the various... | |
| This standard provides the means to define and describe signals used in testing. It also provides a set of common basic signals, built upon formal mathematical specifications so that signals... | |
| This standard provides the techniques and rationale for referencing acoustic telephony measurements to the free field. It applies to ear related measurements such as receive, sidetone and overall. | |
| This standard represents an extension to the IEEE 1505 receiver fixture interface (RFI) standard specification. Particular emphasis is placed on defining within the IEEE 1505 RFI standard a more specific... | |
| This standard specifies a wireless access in vehicular environments (WAVE) dedicated short-range communications (DSRC) application, known as the WAVE resource manager (RM), designed to allow applications at remote sites to... | |
| This Standard specifies a World Wide Web Consortium (W3C) Extensible Markup Language (XML) binding of the data model defined in IEEE Std 1484.11.1-2004. The purpose of this Standard is to... | |
| This standard specifies common public-key cryptographic techniques, including mathematical primitives for secret value (key) derivation, public-key encryption, and digital signatures, and cryptographic schemes based on those primitives. It also specifies... | |
| This standard specifies cryptographic and data authentication procedures for storage devices that support length-expansion, such as tape drives. Such procedures include the following cryptographic modes of operation for the AES... | |
| This standard specifies cryptographic transform and key archival methods for protection of data in sector-level storage devices. | |
| This standard specifies electronic data interchange formats for blank ballot distribution, primarily to assist in satisfying the needs of the Uniformed and Overseas Citizens Absentee Voting Act (UOCAVA) and Military... | |
| This standard specifies the electronic payment service layer and profile for Payment and Identity authentication, and Payment Data transfer for Dedicated Short Range Communication (DSRC) based applications in Wireless Access... | |
| This standard specifies the type, production, and commissioning tests that shall be performed to demonstrate that the interconnection functions and equipment of the distributed resources (DR) conform to IEEE Std... | |
| This standard was developed to provide standard, unambiguous definitions of testability diagnosability metrics and characteristics. It builds on fundamental definitions derived from elements in formal information models related to test... | |
| This standard, describing the framework and rules of the High Level Architecture (HLA), is the capstone document for a family of related HLA standards. It defines the HLA, its components,... | |
| This standard, in conjunction with IEEE Std 1386-2001, IEEE Standard for a CommonMezzanine Card (CMC) Family, defines the physical and environmental layers of a PCI mezzaninecard (PMC) family to be... | |
| This Technical Report defines terms and establishes an extensive and organized set of concepts and their relationships thereby establishing a basis for shared understanding of the concepts and principles central... | |
| This trial-use standard adopts ISO/IEC TR 15026-1:2010, which defines terms and establishes an extensive and organized set of concepts and their relationships for software and systems assurance, thereby establishing a... | |
| This trial-use standard represents an extension to the IEEE 1505 receiver fixture interface (RFI) standard specification. Particular emphasis is placed on defining within the IEEE 1505 RFI standard a more... | |
| Three-phase and single-phase AC synchronous and induction electric motors in ratings 0.18 kW (1/4 hp) and larger are covered in this guide. Primary emphasis is on the use of open... | |
| To provide the means to define and describe signals used in testing. The standard provides a set of common basic signals, mathematically under pinned so that signals can be combined... | |
| Two audio program level measuring devices, the peak-program meter and the standard volume indicator, are described. The peak-program meter is intended to indicate the peak level of audio signals that... | |
| Uniform methods of measurements of radio-frequency power-line interference filterattenuation performance in the range of 100 Hz to 10 GHz are set forth. Nonloaded and loaded attenuation measurements are presented with... | |
| Useful distribution reliability indices, and factors that affect their calculation, are identified. This guide includes indices that are useful today as well as ones that may be useful in the... | |
| Various important aspects that are needed for satisfactory long-term performance of High-Voltage Insulator Coatings (HVIC) are presented in this guide. Various possible application scenarios, maintenance issues on coated insulators, factors... | |
| Vented lead-acid (VLA), valve-regulated lead-acid (VRLA), and nickel-cadmium (NiCd) stationary battery installations are discussed in this guide, written to serve as a bridge between the electrical designer and the heating,... | |
| WAVE Networking Services provides services to WAVE devices and systems. It represents roughly layers 3 and 4 of the OSI model and the IP, UDP, and TCP elements of the... | |
| Ways for integrated circuit designers to analyze chip timing and power consistently across a broad set of electric design automation (EDA) applications are covered in this standard. Methods by which... | |
| Wireless Access in Vehicular Environments (WAVE) is specified in the IEEE 1609 family of standards, within which a number of identifiers are used. The use of these identifiers is described,... | |
| Wireless Access in Vehicular Environments (WAVE) is specified in the IEEE 1609 family of standards, within which a number of identifiers are used. This document describes the use of these... | |
| Wireless Access in Vehicular Environments (WAVE) is specified in the IEEE 1609 family of standards, within which certain identifiers are used. The use of these identifiers is described, and identifier... | |
| Wireless Access in Vehicular Environments (WAVE) Networking Services provides services to WAVE devices and systems. Layers 3 and 4 of the open system interconnect (OSI) model and the Internet Protocol... | |
| Withdrawn January 2012. This guide covers various approaches to good inspection practices for the construction of overhead transmission lines. Inspection responsibilities and reporting as well as inspection of various overhead... | |
| Withdrawn March 2000. Terms that apply to linear, passive, reciprocal, time-invariant networks are defined. The terms apply to mathematical concepts that represent idealizations of physical phenomena. Thus, the definitions apply... | |
| Withdrawn Standard. Withdrawn Date: Feb 06, 2006. The method and equipment involved in proper and economical installation of insulated conductors and/or conduits using the guided boring method are covered. The... | |
| Withdrawn Standard. Withdrawn Date: Feb 06, 2006. This standard describes a utility telemetry service architecture operated over the telephone network. The architecture described is a basic transport architecture capable of... | |
| Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. Test methods for IEEE Std 1224.2-1993, language-independent specification of the applications interface to directory services are defined. | |
| Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. Test methods for measuring conformance to IEEE Std 1224-1993, which defines a general purpose OSI Abstract Data... | |
| Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. Test methods for the C language binding defined in IEEE Std 1327.2-1993 for the applications interface to... | |
| Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. The test methods that may be used to test conformance to IEEE Std 1224.1-1993, IEEE Standard for... | |
| Withdrawn Standard. Withdrawn Date: Mar 06, 2000. This standard defines test methods that may be used to test conformance to IEEE Std 1327.1-1993, which is a C language binding for... |
| << Prev | Next >> |