IEEE - Institute of Electrical and Electronics Engineers, Inc. Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| (Revision of IEEE Std 187-1990) Abstract: Spurious radiation from sound and television broadcast receivers of the superheterodyne type are possible sources of interference with other radio services. This standard describes... | |
| 50 Hz or 60 Hz synchronous generators driven by diesel engines, steam turbines, combustion gas turbines, and hydro-turbines are covered in this guide. The drive may be direct or through... | |
| A 32-bit microprocessor architecture, available to a wide variety of manufacturers and users, is defined. The standard includes the definition of the instruction set, register model, data types, instruction op-codes,... | |
| A clear and consistent set of environmental and social responsibility performance criteria for the design of computers (including notebook computers, desktop computers, integrated desktop computers, portable all-in-one computers, slates/tablets, small-scale... | |
| A clear and consistent set of environmental performance criteria for the design of imaging equipment products is established, providing an opportunity to secure market recognition for efforts to reduce the... | |
| A clear and consistent set of environmental performance criteria for the design of televisions is established, providing an opportunity for manufacturers to secure market recognition for efforts to reduce the... | |
| A close-talking pressure-type microphone is anacoustic transducer which is intended for use in closeproximity to the lips of the talker and is eitherhand-held or boom-mounted. Various types of microphonesare currently... | |
| A common framework for sensor performance specification terminology, units, conditions and limits is provided. Specifically, the accelerometer, magnetometer, gyrometer/gyroscope, barometer/pressure sensors, hygrometer/humidity sensors, temperature sensors, ambient light sensors, and proximity... | |
| A core ontology that specifies the main, most general concepts, relations, and axioms of robotics and automation (R&A) is defined in this standard, which is intended as a reference for... | |
| A cryptographic protocol to provide integrity, and optional confidentiality, for cyber security of serial links is defined in this trial use standard. Specific applications or hardware implementations are not addressed,... | |
| A definition of terms is given, and the requirements and characteristics of testing apparatus are discussed. Test procedures for input measurements, output measurements, operating conditions, radio receiver adjustment, and performance... | |
| A definition of the requirements placed upon providers of a POSIX Conformance Test Suite for the POSIX.2 standard (ISO/IEC9945-2:1993, IEEE/ANSI Std. 1003.2-1992) is provided. These requirements consist of a list... | |
| A definition, terminology, conceptual model, and standard metrics for ad hoc network communication at the nanoscale are provided. Human-engineered networking is extended by the physical properties of nanoscale communication in... | |
| A detailed set of documentation requirements is proposed. The detailed requirements for the documentation of neurofeedback instruments and software to provide quality and availability of information to users are specified. | |
| A framework for monitoring the effects and evaluating comprehensive benefits of demand response programs is proposed in this guide. From perspectives of ex-ante and ex-post evaluation, this guide introduces the... | |
| A framework of Internet Protocol (IP)-based service overlay networks is described and context-aware [e.g., such as required Quality of Service (QoS) level; type of service such as real time versus... | |
| A grammar for a tag-based language whose aim is to provide designers of information systems with a unified and extensible methodology for capturing systems behaviors by means of event logs... | |
| A key element of microgrid operation is the microgrid controller and more specifically the energy management system. It includes the control functions that define the microgrid as a system that... | |
| A key element of microgrid operation is the microgrid energy management system (MEMS). It includes the control functions that define the microgrid as a system that can manage itself, operate... | |
| A map data representation of environments of a mobile robot performing a navigation task is specified in this standard. It provides data models and data formats for two-dimensional (2D) metric... | |
| A means of assessing performance of document facsimile systems, including any compatible combination of facsimile equipment, computers, transmission facilities, and image storage, is provided. | |
| A method for the sizing of nonfunctional software requirements is defined in this standard. It complements ISO/IEC 20926:2009, which defines a method for the sizing of functional user requirements. Non-functional... | |
| A method is provided for specifying a common interoperable format for electronic systems design. The format provides a common way to specify information/data about the project management, netlists, components, design... | |
| A method is provided for specifying power intent for an electronic design, for use in verification of the structure and behavior of the design in the context of a given... | |
| A method of measuring the amplitude levels of an SMPTE 170M-1994; NTSC color or monochrome television video signal is described. It is concerned with luminance measurements at various points in... | |
| A methodology for accessing instrumentation embedded within a semiconductor device, without defining the instruments or their features themselves, via the IEEE 1149.1(TM) test access port (TAP) and/or other signals, is... | |
| A new specification language, named Fuzzy Markup Language (FML), is presented in this standard, exploiting the benefits offered by eXtensible Markup Language (XML) specifications and related tools in order to... | |
| A power delivery connection between a power adapter and a power using devicegreater than 10 W and up to, but less than 240 W, is defined in this standard. A... | |
| A Protection Profile for Hardcopy Devices in a small, private information processing environment is discussed in this standard in which most elements of security are provided by the physical environment,... | |
| A radio interface including medium access control sublayer and physical layer of white space dynamic spectrum access radio systems supporting fixed and mobile operation in white space frequency bands, while... | |
| A real-time operating system (RTOS) called μT-Kernel for small-scale embedded systems such as systems with a single chip microcomputer including 16-bit CPUs, systems with a small amount of ROM/RAM, and... | |
| A recommended practice for applying the Distributed Simulation Engineering and Execution Process (DSEEP) to the development and execution of distributed simulation environments that include more than one distributed simulation architecture... | |
| A set of application layer messaging services are provided in this standard that are applicable for the enterprise and End Device ends of an Advanced Metering Infrastructure (AMI). The application... | |
| A set of tools for efficient video coding, including directional intra prediction, variable block size inter prediction, context adaptive binary arithmetic coding, and the two corresponding decoding procedures, is defined... | |
| A set of tools to support specific audio coding functions including ACELP/TVC compression, bandwidth extension, stereo coding, frame erasure concealment, etc. is defined in this standard. The tool set defined... | |
| A standard for high-speed communication devices via electric power lines, so called broadband over power line (BPL) devices, is defined. Transmission frequencies below 100 MHz are used. All classes of... | |
| A standard XML format for representing electronic design intellectual property (IP) quality information, based on an information model for IP quality measurement, is defined. It includes a schema and the... | |
| A suggested outline for information that should be included in a design criteria for overhead transmission lines is presented in this guide. This guide is not a design criteria or... | |
| A test procedure (Combination of IEEE Std 275-+-1992 and IEEE Std 429-+-1994) for comparing two or more insulation systems in accordance with their expected life at rated temperature is outlined. | |
| A test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature is described. The procedure is limited to insulation systems for ac... | |
| A trial-use, non-industry-specifi c recommended practice for voltage sag and short interruption ride-through performance and compliance testing for all electrical and electronic equipment connected to low-voltage power systems that can... | |
| A two-level code construction scheme for non-volatile memories (NVM) that is based on low-density parity-check codes is specified in this standard. This scheme constructs an auxiliary codeword that encodes a... | |
| A uniform method by which the thermal endurance of electrical insulation systems for dry-type specialty and general- purpose transformers can be compared is established. These insulation systems are intended for... | |
| A uniform method by which the thermal endurance of electrical insulation systems for dry-type specialty and general-purpose transformers can be compared is established. Covered are insulation systems intended for use... | |
| A uniform method by which the thermal endurance of electrical insulation systems for dry-type specialty and general-purpose transformers can be compared is established. These insulation systems are intended for use... | |
| A vendor-independent generalized method for modeling spectrum consumption of any type of use of radio frequency spectrum and the attendant computations for arbitrating the compatibility among models are defined in... | |
| A worldwide standard for narrow band power line communications via AC, DC, and non-energized electric power lines using frequencies below 500 kHz. Data rates of up to 500 kbps are... | |
| A worldwide standard for narrowband power line communications (PLC) via alternating current, direct current, and nonenergized electric power lines using frequencies below 500 kHz. Data rates of up to 500... | |
| Accepted best industry practices for the preparation of extruded dielectric shieldedmedium voltage cables rated 2.5 kV through 46 kV for the installation of mating accessories aredefined in this guide. The... | |
| Activities related to load flow analysis, including design considerations for new systems, analytical studies for existing systems, as well as operational and model validation considerations for industrial and commercial power... | |
| Activities related to motor-starting studies, including design considerations for new systems, analytical studies for existing systems, as well as operational and model-validation considerations for industrial and commercial power systems are... | |
| Activities related to preferred power supply (PPS) reliability, including design considerations, analytical studies, operational and maintenance considerations, and interface agreements between a nuclear power generating station (NPGS) and its associated... | |
| Activities related to short-circuit analysis, including design considerations for new systems, analytical studies for existing systems, as well as operational and model validation considerations for industrial and commercial power systems... | |
| Additional components of the IEEE 1900.4 system are defined in this amendment to enable mobile wireless access service in white space frequency bands without any limitation on used radio interface... | |
| Administratively withdrawn December 2007. Abstract methods for the conformance testing of 802.3 Clause 14 (10BASE-T MAU) implementations in order to satisfy conformance requirements arising from the ISO/IEC 8802-3 (IEEE Std... | |
| Adoption of IEEE Std 1451.0-2007. This standard provides a common basis for members of the IEEE 1451 family of standards to be interoperable. It defines the functions that are to... | |
| Adoption of IEEE Std 1451.1-1999. This standard defines an object model with a network-neutral interface for connecting processors to communication networks, sensors, and actuators. The object model containing blocks, services,... | |
| Adoption of IEEE Std 1451.2-1997. A digital interface for connecting transducers to microprocessors is defined. A Transducer Electronic Data Sheets (TEDS) and its data formats are described. An electrical interface,... | |
| Adoption of ISO/IEC TR 24748-3:2011. ISO/IEC TR 24748-3:2011 is a guide for the application of ISO/IEC 12207:2008. It addresses system, life cycle, process, organizational, project, and adaptation concepts, principally through... | |
| An abstraction layer for multiple home networking technologies that provides a common interface to widely deployed home networking technologies is defined in this standard: IEEE 1901 over power lines, IEEE... | |
| An abstraction layer for multiple home networking technologies that provides acommon interface to widely deployed home networking technologies is defined in this standard:IEEE 1901(TM) over power lines, IEEE 802.11(TM) for... | |
| An amendment to the published IEEE Std 1900.1-2008 to add new terms and definitions. | |
| An exchange format is specified in this standard, using extensible markup language (XML), for identifying instrumentation that may be integrated in an automatic test system (ATS)that is to be used... | |
| An exchange format is specified in this standard, using extensible markup language (XML), for identifying the test configuration used to test for and diagnose faults of a unit under test... | |
| An exchange format using extensible markup language (XML) for identifying all of the hardware, software, and documentation associated with a test adapter is specified in this document. This test adapter... | |
| An exchange format, using extensible markup language (XML), for identifying all of the hardware, software, and documentation associated with a test station is specified in this document. This test station... | |
| An exchange format, utilizing XML, for identifying all of the hardware, software, and documentation associated with a test station is specified in this document. This test station may be used... | |
| An exchange format, utilizing XML, for identifying all of the hardware, software, anddocumentation associated with a test station is specified in this document. This test station maybe used as a... | |
| An integrated framework of the test software for household appliances is defined. This standard specifies the test environment and the test information as well as the means to acquire the... | |
| An introductory review of the equivalent electric circuit of a piezoelectric vibrator and its parameters is followed by a discussion of the determination of these parameters by the transmission method. | |
| Applications of electric energy storage equipment and systems (ESS) for electric power systems (EPSs) are covered. Testing items and procedures, including type test, production test, installation evaluation, commissioning test at... | |
| Approximately 100 terms and their definitions, for accurately and precisely describing the waveforms of pulse signals and the process of measuring pulse signals, are presented in this standard. Algorithms are... | |
| Because of the complexity and interrelationship of some of the terms used in discussing advanced radio system technologies, additional tutorial material is provided in informative annexes and NOTES. It is... | |
| Capacitors rated 216 V or higher, 2.5 kvar or more, and designed for shunt connection to alternating-current transmission and distribution systems operating at a nominal frequency of 50 or 60... | |
| Capacitors rated 216 V or higher, 2.5 kvar or more, and designed for shunt connection toalternating-curren t transmission and distribution systems operating at a nominal frequency of 50 Hzor 60... | |
| Careful consideration of the physical and electrical characteristics of overhead lines and transmission cables are necessary in designing a transition structure between the two systems. Environmental and social factors also... | |
| Changes to clarify how and when to encrypt header and payload information elements, update the interleaver design in order to eliminate some drawbacks in certain channels, a new PHY data... | |
| Clarifying and furthering the subject selection of the sample size in the clinical study; looking into the results of the validation study with respect to the patient’s body position and... | |
| Common terminology and recommended practices for initiating and conducting event investigations, analyzing data, producing results, and identifying corrective actions associated with facility personnel, processes, equipment, and systems at nuclear facilities... | |
| Compared to some of the older areas of specialization found within the IEEE organization, ferroelectrics is a relatively new field. The first standard covering the definitions of ferroelectric terms was... | |
| Conformance checks for eXtensible Markup Language (XML) data designed to describe electronic systems are formulated by this standard. The meta-data forms that are standardized include components, systems, bus interfaces and... | |
| Conformance checks for extensible Markup Language (XML) data designed to describe electronic systems are formulated by this standard. The meta-data forms that are standardized include: components, systems, bus interfaces and... | |
| Construction Drawings of Line Impedance Network Required for Measurement of Conducted Interference to the Power Line from FM and Television Broadcast Receivers in the Range of 300 kHz to 25... | |
| Contained in this trial-use guide are instructions for conducting tests to determine the performance characteristics and machine parameters of permanent magnet (PM) machines. The tests described may be applied to... | |
| Control architecture for high-power electronics from power semiconductor device levels to the power system level is defined and characterized. Coverage includes the application of power electronics in the areas of... | |
| Correction to Table 1 on page 14 of IEEE Std 293-1969 | |
| Covered in this recommended practice is the protection of bus and switchgear used in industrial and commercial power systems. Also provided are fault protection and isolation strategies for the substation... | |
| Criteria for design analysis for qualification, quality, and reliability of rechargeable lithium ion and lithium ion polymer batteries for cellular telephone applications are established. Also included are: battery pack electrical... | |
| Criteria for testing methods and technical parameters for geometrical features, physicaland chemical properties, and de-nitrogen oxides (DeNOx) technological properties of power plantDeNOx plate-type catalysts are established in this standard. | |
| Currently, no defined, industry-accepted method exists for characterizing the performance of electrical circuit probes. Each vendor has its own proprietary methods for characterization, leaving probe customers and users without a... | |
| Data supporting the reliability evaluation of existing industrial and commercial power systems are described. This recommended practice is likely to be of greatest value to the power-oriented engineer with limited... | |
| Defined is a standard for high speed communication devices via electric power lines, so called Broadband over Power Line (BPL) devices. The standard uses transmission frequencies below 100 MHz. This... | |
| Definitions and explanations of key concepts in the fields of spectrum management, spectrum trading, cognitive radio, dynamic spectrum access, policy-based radio systems, software defined radio, and related advanced radio system... | |
| Definitions of 48 terms are accompanied by a list of 38 letter symbols and the standard crossed-rectangle-in -circle-with-crosswi res circuit symbol, with the colour code for lead wires to p-type... | |
| Definitions of Parametric Device Terms | |
| Definitions of Semiconductor Terms | |
| Definitions of Terms for Radio Transmitters | |
| Definitions of Terms for Radio Wave Propagation | |
| Definitions of Terms for Thyristors | |
| Definitions of Terms Relating to Television | |
| Described in this guide are methods to evaluate and test the electrical performance of energy saving devices (ESDs). Measurement methods that focus on monitoring the power consumed or generated by... | |
| Described in this recommended practice are ways for using probability methods to conduct a reliability analysis of industrial and commercial power systems. It is likely to be of greatest value... | |
| Describes a method for measuring differential gain and differential phase in equipment transmitting either monochrome or color television signals. The characteristics to be measured are defined.<> | |
| Describes methods of measuring the significant amplitude levels of a monochrome or color television signal, either composite or noncomposite. The author discusses measurements at points in transmission systems where the... | |
| Direct-current (dc) charging is a method of charging that facilitates rapid energy transfer from the electric grid to plug-in vehicles. This method of charging allows significantly more current to be... | |
| Discovery, authentication, and authorization protocols between hosts and storage devices over multiple transports are defined in this standard. It specifies a new Silo Type Identifier (STID) allocation process that uses... | |
| Discovery, authentication, and authorization protocols between hosts and storage devices over multiple transports are defined in this standard. | |
| Discussed in this recommended practice is the system grounding of industrial and commercial power systems. The recommended practices in this document are intended to provide explanations of how electrical systems... | |
| Electric couplings are widely used to transmit mechanical torque from one rotating member to another. They are distinguished from mechanical couplings in that their torque transmitting capability is initiated, and... | |
| Electrical and control design of water conveyance facilities associated with hydroelectric projects including associated penstocks, valves, and gates are described in this guide. Guidance to plan and prepare designs is... | |
| Electrical distribution systems in cement plants that would result in satisfactory equipment utilization, reliability, performance, safety, and low maintenance-all at a reasonable cost are recommended in this IEEE standard. Power... | |
| Electromagnetic compatibility (EMC) criteria and consensus test and measurements procedures for broadband over power line (BPL) communication equipment and installations are presented. Existing national and international standards for BPL equipment... | |
| Electromagnetic performance requirements for replaceable electronic modules (REMs) are specified. This standard is suitable for items that have the following features: removable/replaceabl e electronic circuit modules that plug into an... | |
| Extensions to IEEE Std 1857(TM)-2013 are provided for surveillance video to support tracking across tracing in multiple cameras at surveillance based on the navigation information which mainly includes timing, location... | |
| Facsimilie Test Chart | |
| Field testing methodology and techniques are presented for measuring parameters for dc transmission lines and earth electrode lines are discussed in this guide. The topics addressed include the basic requirements... | |
| Functional design recommendations and field practices for motor control centers (single- and three-phase 50 Hz and 60 Hz and dc) are provided in this guide. The features and practices described... | |
| General guidelines toward the preparations of a functional specification of transmission fixed-series capacitor (FSC) banks using overvoltage protection based on three technologies are provided. The three technologies are:- metal oxide... | |
| Gives technical terms and their definitions that have been adopted by, or coined for, the television broadcasting industry. Wherever possible, definitions published by the International Electrotechnical Commission have been adopted.<> | |
| Guidance and implementation procedures for the IEEE 1680 family of standards is provided, and the methods by which manufacturers may declare electronic products as conforming with the standards in the... | |
| Guidance and implementation procedures for this and other standards in the IEEE 1680(TM) family of standards are provided. A clear and consistent set of environmental performance criteria for the design... | |
| Guidance and implementation procedures for this and other standards in the IEEE 1680TM family of standards are provided. A clear and consistent set of environmental performance criteria for the... | |
| Guidance for the application of the modernized metric system in the United States is given. Known as the International System of Units (SI), the system is intended as a basis... | |
| Guidance on technical protection measures to those who produce, use, process, or standardize the specifications of electronic design intellectual property (IP) are provided in this recommended practice. Distribution of IP... | |
| Guidance on the application of service management systems (SMS) based on the requirements in IEEE Std 20000-2-2013 (ISO/IEC 20000-1) is provided in this adoption of ISO/IEC 20000-2:2012. This standard enables... | |
| Guidelines to specify, procure, design, manufacture and develop manuals, safety procedures, practices and procedures for effective maintenance of medium-voltage direct current (MVDC) electrical power systems are discussed in this recommended... | |
| Guidelines to specify, procure, design, manufacture and develop manuals, safety procedures, practices and procedures for effective maintenance of medium-voltage direct current (MVDC) electrical power systems is discussed in this recommended... | |
| Harmonic studies and analysis of industrial and commercial power systems are described. The basic concepts involved in such studies are described first. This is followed by a discussion of how... | |
| Identity assertion, role gathereing, multilevel access control, assurance, and auditing are provided by the Biometric Open Protocol Standard (BOPS). The BOPS implementation includes software running on a client device, a... | |
| Identity assertion, role gathering, multilevel access control, assurance, and auditing are provided by the Biometric Open Protocol Standard (BOPS). An implementation of the BOPS III spec is described, which includes... | |
| Identity assertion, role gathering, multilevel access control, assurance, and auditing are provided by the Biometric Open Protocol Standard (BOPS). The BOPS implementation includes software running on a client device (smartphone... | |
| IEEE Standard | |
| IEEE Std 167-1966. Test Procedure for Facsimile was based on previous issues of the IEEE Test Chart. | |
| IEEE Std 1680-2006 provides a set of environmental performance criteria for notebook computers, desktop computers, and computer monitors. In addition, it defines the methods by which manufacturers may declare such... | |
| IEEE Std 1708 establishes a normative definition of wearable cuffless blood pressure (BP) measuring devices and the objective performance evaluation of this kind of device. The standard is independent of... | |
| IEEE Std 2030 provides alternative approaches and best practices for achieving smart grid interoperability. It is the first all-encompassing IEEE standard on smart grid interoperability providing a roadmap directed at... | |
| Important smart distribution applications are categorized, descriptions of the critical functions involved are developed, important components of these systems are defined, and examples of the systems that can be considered... | |
| IN A TELEVISION SYSTEM, it is through the agency of the scanning process that the two-dimensional space function, comprising the image at the camera, is transformed into a one-dimensional time... | |
| In the various standards there will be found a number of different situations regarding Usual Service Conditions. The following three are typical.1. The group where the maximum ambient temperature is... | |
| In this guide, the field testing methodology and techniques are presented for measuring electrical parameters of AC transmission lines. The topics will include safety precautions; requirements for measuring instruments; measurement... | |
| In this IEEE Standard instructions for conducting and reporting the more generally applicable and acceptable tests to determine the performance characteristics of polyphase induction motors having liquid in the magnetic... | |
| In this period of transition, authors and editors of scientific and engineering literature sometimes need basic information on the International System of Units (the Metric System), described in this standard. | |
| In this standard, a parameterized and abstracted power model enabling system, software, and hardware intellectual property (IP)–centric power analysis and optimization are described. Concepts and constructs are defined for the... | |
| In this standard, a set of tools for efficient video coding is defined, including directional intra prediction, variable block size inter prediction and context adaptive binary arithmetic coding, and the... | |
| Included in this amendment to IEEE Std 1900.6(TM) are procedures, protocols, and message format specifications for the exchange of sensing related data, control data, and configuration data between spectrum sensors... | |
| Induced voltage working procedures for underground transmission circuits are established in this guide. A transmission circuit when de-energized will have an induced voltage when in a common duct bank with... | |
| Information for selecting the proper circuit breaker for a particular application is provided. Application engineers are aided in specifying the type of circuit breaker, ratings, trip functions, and accessories. Circuit... | |
| Information on the installation of fire-rated, power, control, and instrumentation cables suitable for hydrocarbon pool fires, as typically used in petroleum, chemical, and similar plants, offshore marine platforms, in emergency... | |
| Instrument Description templates, compliant with IEEE Std 1671.2-2012, that providers of synthetic instruments should use to describe waveform generators, digitizers, external local oscillators, and up and down converters are provided... | |
| Interfaces and service access points defined in IEEE Std 1900.4TM are described in detail, enabling distributed decision making in heterogeneous wireless networks and obtaining context information for this decision making. | |
| Interfaces for intelligently distributing and replicating content over heterogeneous networks to portable and intermediate devices with local storage are defined. | |
| International System of Units Conversion | |
| ISO/IEC 20000-1:2011, a service management system (SMS) standard, is adopted by the IEEE in this standard. It specifies requirements for the service provider to plan, establish, implement, operate, monitor, review,... | |
| ISO/IEC TR 24748-2:2011 is adopted by this standard. ISO/IEC TR 24748-2:2011 is a guide for the application of ISO/IEC 15288:2008. It addresses system, life cycle, process, organizational, project, and adaptation... | |
| ISO/IEC TR 24774:2010 is adopted by this standard.An increasing number of international, national and industry standards describe process models. These models are developed for a range of purposes including process... | |
| ISO/IEC/IEEE 21451-7:2011 defines data formats to facilitate communications between radio frequency identification (RFID) systems and smart RFID tags with integral transducers (sensors and actuators). It defines new Transducer Electronic Data... | |
| ISO/IEC/IEEE 24748 provides unified and consolidated guidance on the life cycle management of systems and software. This document focuses on the processes required for successful planning and management of the... | |
| ISO/IEC/IEEE 24765:2010 provides a common vocabulary applicable to all systems and software engineering work. It was prepared to collect and standardize terminology. ISO/IEC/IEEE 24765:2010 is intended to serve as a... | |
| ISO/IEC/IEEE 26511:2012 specifies procedures for managing user documentation throughout the software life cycle. It applies to people or organizations producing suites of documentation, to those undertaking a single documentation project,... | |
| ISO/IEC/IEEE 26512:2011 was developed to assist users of ISO/IEC 15288:2008 (IEEE Std 15288-2008) or ISO/IEC 12207:2008 (IEEE Std 12207-2008) to acquire or supply software user documentation as part of the... | |
| ISO/IEC/IEEE 26515:2012 specifies the way in which user documentation can be developed in agile development projects. It is intended for use in all organizations that are using agile development, or... | |
| Letter symbols for physical quantities used in the science and technology of acoustics are covered. Abbreviations for a number of acoustical levels and related measures that are in common use... | |
| Letter symbols used to represent physical quantities in the field of electrical science and electrical engineering are defined. The symbols are independent of the units employed or special values assigned. | |
| Methods for conformance testing to satisfy requirements arising from the ISO/IEC 8802-3 [ANSI/IEEE Std 802.3] standard are defined. The conformance test suite is intended to detect incorrect implementations of the... | |
| Methods for determining the reliability of 724 continuous power systems in industrial and commercial facilities are described in this recommended practice. The method of reliability analysis by probability methods is... | |
| Methods for storing, retrieving, and accessing online laboratories as smart and interactive learning objects are defined in this standard. For this purpose, the first level of the standard offers any... | |
| Modern broadcast radio receivers of the superheterodyne type are frequently sources of spurious radiation from the local oscillator, which radiation may cause severe interference with other services. In addition, in... | |
| Near-field test practices for the measurement of antenna properties are described in this document and near-field measurement practices for the three principal geometries: cylindrical, planar, and spherical are recommended. Measurement... | |
| No abstract | |
| oManual is a standard for storing and transmitting procedural manuals. oManuals common data format can be used as an offline file package or via online RESTful API endpoints, using XML... | |
| On page 4 of IEEE Std 1672-2006, a correction to Definition 3:18 | |
| On-site acceptance tests of ultra-high-voltage power equipment are subject to thisguide. Criteria and requirements for test items, conditions, methods, and results are established.The stated specifications and requirements, both technical and... | |
| Open system interfaces for high power electronics equipment used in zonal electrical distribution systems rated above 100 kW are identified in this standard. The required power, monitoring, information exchange, control,... | |
| OpenFog Consortium--OpenFog Reference Architecture for Fog Computing is adopted by this standard. OpenFog Reference Architecture [OPFRA001.020817] is a structural and functional prescription of an open, interoperable, horizontal system architecture for... | |
| Outdoor and indoor composite station post insulators used in high-voltage direct-current power transmission systems are covered in this standard. The composite station post insulators covered by this standard consist of... | |
| Parameters to be used in the identification of contact wires used in transit systems and electric railways and railroads are defined. The identification of contact wire by metallurgical content, electrical... | |
| Physical (PHY) and media access control (MAC) layers of a broadband powerline communication technology called flexible channel wavelet PHY/MAC (FCW) for Internet of Things applications (IoTPLC) based on wavelet orthogonal... | |
| Physical (PHY) and media access control (MAC) layers of the medium frequency band (less than 12 MHz) broadband power line communication technology for smart grid applications (SGPLC) based on orthogonal... | |
| Power capacitors rated 216 V or higher, 2.5 kvar or more, and designed for shunt connection to alternating-current transmission and distribution systems operating at a nominal frequency of 50 Hz... | |
| Practical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets and headsets. The methods may also be applicable to a wide variety of other communications... | |
| Practical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets, and headsets are presented. The methods may also be applicable to a wide variety of... | |
| Practical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets, and headsets are provided in this revised standard. The methods may also be applicable to... | |
| Protocol, data encapsulations, connection management, and presentation time procedures used to ensure interoperability between audio and video-based end stations that use standard networking services provided by all IEEE 802 networks... | |
| Protocols are provided for measurement and control networks for home and residential quarters so that they can achieve green, smarter functions. The interactive data format between devices and systems—as well... | |
| Protocols to support advanced content delivery capability in next generation service overlay networks including content delivery (CD) functional entity (FE), service routing (SR) FE, service policy decision (SPD) FE, service... | |
| Provided in this document are specific requirements for field installed sealing between a pressurized system (stream) containing flammable or combustible process fluids which is connected directly or indirectly to an... | |
| Quantifying the performance of camera-equipped mobile devices is covered in this standard, with an emphasis on metrics and procedures appropriate to the types of sensors, lenses, and signal processing routines... | |
| Radio Transmitters: Definitions of Terms | |
| Reaffirmed 2008. Letter symbols for physical quantities used in the science and technology of acoustics are covered. Abbreviations for a number of acoustical levels and related measures that are in... | |
| Recommendations and guidelines for managing natural disaster impact on key electrical facilities and systems in petroleum and chemical facilities are provided in order to minimize economic damage by pre-assessment risk... | |
| Recommendations and requirements for the design and applications of power electronics in land-based (onshore) and marine (offshore) electrical power systems are provided in this standard. A wide range of power... | |
| Recommendations for summarizing the performance and the expected uncertainty of the reflection coefficient of rectangular-waveguid e apertures and interfaces for 110 GHz and above are provided in this recommended practice. | |
| Recommended in this document are practices for the testing and implementation of smart grid communication with regard to safety, electromagnetic compatibility, and environmental and mechanical requirements, but excluding interoperability. | |
| Recommended information for an objective evaluation of an emerging energy storage device or system by a potential user for any stationary application is covered in this document. Energy storage technologies... | |
| Recommended practice for Distributed Simulation Engineering and Execution Process (DSEEP) is described. The DSEEP is intended as a high-level process framework into which the lower-level systems engineering practices native to... | |
| Recommended practices for World Wide Web page engineering for Intranet and Extranet environments, based on World Wide Web Consortium (W3C) and related industry guidelines, are defined in this recommended practice. | |
| Recommended rate gyro test procedures derived from those currently in use, including test conditions to be considered, are compiled. In some cases alternate methods for measuring a performance characteristic have... | |
| Redesignated as IEEE C37.34e. The technical requirements for the design, fabrication, testing, and installation of a gas-insulated substation (GIS) are covered; its intent is advisory. This guide discusses parameters to... | |
| Reference information to assist electric utilities and their contractors with the development of computer-based means for collecting and managing transmission line inspection and maintenance data and associated asset information is... | |
| Reliability of electric power systems remains an important societal issue. While transmission disturbances draw national attention and scrutiny, service interruptions at the distribution level are the primary concern of the... | |
| Replaced by 62531(E):2007. The IEEE Property Specification Language (PSL) is defined in this standard. PSL is a formal notation for specification of electronic system behavior, compatible with multiple electronic system... | |
| Replaced by ISO/IEC 23026: 2006. Recommended practices for World Wide Web page engineering for Intranet and Extranet environments, based on World Wide Web Consortium (W3C(R) ) and related industry guidelines,are... | |
| Reprinted from the proceedings of the I.R.E Vol. 48, NO.8 August 1960 | |
| Revision of IEEE Std 260.1-1993, Letter symbols for units of measurement are covered in this standard. | |
| Self-study course for the IEEE Red Book. Includes study guide, workbook and final exam. | |
| Semiconductor radiation detectors have come into widespread use in recent years for detection and high-resolution spectroscopy of ionizing radiation. Both silicon and germanium detectors have been developed, with silicon finding... | |
| Signs and symbols used in writing mathematical text are defined. Special symbols peculiar to certain branches of mathematics, such as non-Euclidean Geometries, Abstract Algebras, Topology, and Mathematics of Finance, which... | |
| Since 1999, test methods for freezing conditions, including ice and snow, have been refined by the IEEE Dielectrics and Electrical Insulation Society and IEEE Power and Energy Society Task Forces... | |
| Specifications for rectangular waveguide interfaces are given in this standard. It considers the tolerances of the waveguide interface dimensions and the effect these have on the electrical properties (in terms... | |
| Specifications for the waveguide (including aperture dimensions, frequency range, cutoff frequency, etc.) are given in this standard. This standard considers the tolerances of the waveguide aperture dimensions and the effect... | |
| Spurious radiation from sound and television broadcast receivers are possible sources of interference with other radio services. This standard describes the potential sources of spurious radiation from receivers intended for... | |
| Standard Docs | |
| Standard for a Protection Profile for Hardcopy Devices in a commercial information processing environment in which a moderate level of document security, network security, and security assurance, are required. Typically,... | |
| Standard for a Protection Profile for Hardcopy Devices in a public-facing environment in which document security is not guaranteed, but access control and usage accounting are important to the operator... | |
| Standard for a Protection Profile for Hardcopy Devices in a restrictive commercial information processing environment in which a relatively high level of document security, operational accountability, and information assurance, are... | |
| Standardization of circuit integrity cable testing is beneficial to cable manufacturers, distributors, and users. Uniform procedures, consistent, repeatable results, and measurable test acceptance criteria are required to allow comparisons among... | |
| Standardization of circuit integrity cable testing is beneficial to cable manufacturers, distributors, and users. Uniform procedures, consistent, repeatable results, and measureable test acceptance criteria are required to allow comparisons among... | |
| Storage file formats and real-time transport protocol (RTP) payload formats for IEEE 1857(tm) video and IEEE 1857.2(tm) audio are defined. The storage of video and audio not only uses the... | |
| Superseded by 18-2002. Capacitors rated 216 V or higher, 2.5 kvar or more, and designed for shunt connection to alternating-current transmission and distribution systems operating at a nominal frequency of... | |
| Superseded by 187-2003. IEEE Standard on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from FM and Television Broadcast Receivers, describes the potential sources of spurious radiation from... | |
| Superseded by 2001-2002 This standard defines recommended practices for Web page engineering. It addresses the needs of Webmasters and managers to effectively develop and manage World Wide Web projects (internally... | |
| Superseded by 260.1-1993 (redesignation). No Abstract. | |
| Superseded by 260.1-2004. General principles of letter symbol standardization are discussed. Symbols are given for general use and for use with limited character sets. The symbols given are intended for... | |
| Superseded by IEEE Std 208-1995 The methods for measuring the resolution of camera systems are described. The primary application is for users and manufacturers to quantify the limit where fine... | |
| Superseded by IEEE Std 269-2002. Practical methods for measuring the transmission characteristics of both digital and conventional to wire analog telephone sets by means of objective measurements on a test... | |
| Superseded by IEEE Std 299-2006. Uniform measurement procedures and techniques are provided for determining the effectiveness of electromagnetic shielding enclosures at frequencies from 9 kHz to 18 GHz (extendable to... | |
| SystemC(R) is defined in this standard. SystemC is an ANSI standard C++ class library for system and hardware design for use by designers and architects who need to address complex... | |
| SystemC(R) is defined in this standard. SystemC(R) is an ANSI standard C++ class library for system and hardware design for use by designers and architects who need to address complex... | |
| Tables of letter symbols and abbreviations for quantities in the science and technology of acoustics are contained in this standard. Recommendations for their use are also provided. Specialties within acoustics... | |
| Technical and editorial corrections are provided by this corrigendum to IEEE Std 1722.1-2013. | |
| Techniques to select wind turbine and wind farm aero acoustic noise measurements, including instrumentation standards and metrology technology, measurement set, measurement procedures, data processing, and noise source data analysis are... | |
| Television and FM broadcast receivers are frequently potential sources of interference to other television and FM broadcast receivers and to receivers in other services. This standard defines a method for... | |
| Terms and definitions are modified in this corrigendum to IEEE Std 1900.6(TM)-2011, in response to comments received during the approval process of IEEE Std 1900.1a(TM)-2012 and IEEE Std 1900.6a(TM)-2014, which... | |
| Terms and definitions used in the context of electromagnetic wave propagation relating to the fields of telecommunications, remote sensing, radio astronomy, optical waves, plasma waves, the ionosphere, the magnetosphere, and... | |
| Terms currently in use in the field of stationary batteries are defined in this standard.This standard does not include terms specific to battery manufacturing activities or to nonstationarybattery applications such... | |
| Terms used for direct current electric transit overhead contact systems are defined in this standard | |
| Testing and verification standards for the commonly used hardware, primarily couplers, and enclosures, for broadband over power line (BPL) installations, and installation methods to enable compliance with applicable codes and... | |
| The 'APPLICATION' layer with TCP/IP providing functions in the 'TRANSPORT' and 'INTERNET' layers is defined in this standard. Depending on the physical layer in use (e.g., IEEE 802.15.4(TM), IEEE 802.11(TM),... | |
| The ac/dc substation control equipment, pole control equipment, protection equipment, and auxiliary secondary equipment of high-voltage direct-current (HVDC) transmission systems are the focus of this guide. Based on analyzing the... | |
| The aim of this recommended practice is establishing a protocol for the measurement of space charges in high-voltage direct-current (HVDC) extruded cables having rated voltage up to 550 kV. Such... | |
| The aim of this recommended practice is to expand the use of IEEE power distribution test feeders into a broader space of software developers, software users, and researchers. The need... | |
| The ANSI/IEEE Std 242-1986, the IEEE Buff Book, deals with the proper selection, application, and coordination of the components which constitute system protection for industrial plants and commercial buildings. System... | |
| The application layer with TCP/IP providing functions in the transport and Internet layers to enable utility management of the end user energy environment, including demand response, load control, time of... | |
| The application of computerized operating procedure systems (COPS), their design (i.e., form and function), and use is presented in this guide. | |
| The continuing expansion and modernization program in the cement industry has placed an increasing importance on the cement plant power distribution system. Increasing plant capacity accompanied by larger kilns, grinding... | |
| The continuing expansion and modernization program in the cement industry has placed an increasingimportance on the current plant power distribution system. Increasing plant capacity accompaniedby larger kilns, grinding mills, crushers,... | |
| The current issue of this Standard is a revision of the previous issue C62.1-1957 to change many of the definitions, to add a new definition titled "Virtual Duration of Wave... | |
| The definition of the language syntax and semantics for SystemVerilog, which is a unified hardware design, specification, and verification language, is provided. This standard includes support for modeling hardware at... | |
| The definitions assembled in this revised Report have been taken largely from the latest approved sections of the A. I. E. E. Standards. In some cases several similar definitions are... | |
| The definitions for physical quantities and units commonly used in applied science andtechnology, and for related terms that concern systems of measurement, are included in thisstandard. Particular emphasis is placed... | |
| The design of automatic train protection and signal systems for fixed guideway (e.g., rail) transit systems requires knowledge of the braking distance of the vehicles utilized on the systems. Methods... | |
| The design, installation, and monitoring of time synchronization systems in power utility substations is covered. This includes time sources such as Global Positioning Satellite (GPS) and time distribution systems such... | |
| The DNP3 protocol structure, functions, and application alternatives and the corresponding conformance test procedures are specified. In addition to defining the structure and operation of DNP3, three application levels that... | |
| The DNP3 protocol structure, functions, and interoperable application options (subset levels) are specified. The simplest application level is intended for low-cost distribution feeder devices, and the most complex for full-featured... | |
| The document addresses methods and practices necessary to reduce the risk of damages to communications equipment within structures arising from lightning surges causing GPR (ground potential rise) and similar potential... | |
| The encapsulation and mapping of radio protocols for transport over Ethernet frames, using radio over Ethernet (RoE), are defined in this standard. Structure-agnostic definitions are provided for any digitized radio... | |
| The enhanced security management function for the protocol defined in IEEE 1888(TM), “Ubiquitous Green Community Control Network Protocol,” is described in this standard. Security requirements, system security architecture definitions, and... | |
| The enhanced security management function for the protocol defined in IEEE 1888(TM), Ubiquitous Green Community Control Network Protocol, is described in this standard. Security requirements, system security architecture definitions, and... | |
| The evolution of technology and the advancement of communications have resulted in an increased awareness of energy bursts. Such bursts which interfere with desired signals are properly classified as noise. | |
| The evolution of the harmonized set of ISO/IEC/IEEE 15288-12207 related standards and technical reports that are discussed in this International Standard provides detailed requirements and guidance on the application of... | |
| The factors that should be taken into account for planning and designing microgrids are covered in this recommended practice. It provides approaches and good practices to be considered in the... | |
| The following constitutes a revision of IEEE No.170 (53 IRE ll.Sl), "Standards on Modulation Systems: Definitions of Terms, 1953." It is not intended to cover the subject matter of Information... | |
| The following three criteria: Required--End-of-lif e processing requirements (currently 4.6.2.1); Optional--Manufactur er recyclers or reuses toner material collected through its cartridge and container take-back program (currently 4.9.3.2); and Optional--Manufactur er... | |
| The formulation and application of reference designations for electrical and electronics parts and equipment are covered. The reference designations of this standard are intended for uniquely identifying and locating discrete... | |
| The framework of building a distributed ocean observing software system based on complex virtual instruments (CVIs), which are used for processing and displaying the collected data from ocean instruments and... | |
| The functions and features to be provided in intelligent electronic devices (IEDs) to accommodate critical infrastructure protection programs are defined in this standard. Security regarding the access, operation, configuration, firmware... | |
| The functions and features to be provided in substation intelligent electronic devices (IEDs) to accommodate critical infrastructure protection programs are defined in this standard. Security regarding the access, operation, configuration,... | |
| The grounding and bonding of equipment in industrial and commercial power systems is covered in this recommended practice. The interconnection and grounding of the non-electrical metallic elements of a system... | |
| The guide for the online monitoring and recording system of transient overvoltages in power system is used to regularize its methods, define the concrete structure of recording system for transient... | |
| The IEEE Property Specification Language (PSL) is defined in this standard. PSL is a formal notation for specification of electronic system behavior, compatible with multiple electronic system design languages, including... | |
| The IEEE Standards Coordinating Committee for Letter and Graphic Symbols recognises the need for guidelines to be used in developing and applying those symbols that are employed in the electrical... | |
| The increasing variety of speech transmission systems has created a new problem for communication engineers. This problem consists of the subjective evaluation of the speech quality produced by these systems. | |
| The intent of this Test Procedure is to establish a uniform method by which the life ofelectronics transformer insulation systems can be compared. Thermal degradation is generallyone of the major... | |
| The interdisciplinary tasks, which are required throughout a system's life cycle to transform customer needs, requirements, and constraints into a system solution, are defined. In addition, the requirements for the... | |
| The interfaces and data structures required to exchange sensing-related information in order to increase interoperability between sensors and their clients developed by different manufacturers are defined in this standard. The... | |
| The issuance of this document to supersede IEEE Std 28-1967 (ANSI C62.1-1967) revises many portions of the standard and adds two significant design tests, namely, switching-surge sparkover characteristic tests for... | |
| The method requires a suitable Artificial Mouth. It also specifies a standard Artificial Ear, standard circuits comprising direct-current power feed and connecting loops, and a standard pressure microphone. 2.3 This... | |
| The methods for measuring the resolution of camera systems are described. The primary application is for users and manufacturers to quantify the limit where fine detail contained in the original... | |
| The methods that are used to measure telephone-set transmission performance may be divided into two classes: objective methods and subjective methods. The objective methods, which are those discussed in this... | |
| The methods that are used to measure telephone-set transmission performance may be divided into two classes: objective methods and subjective methods. The objective methods, which are those to be discussed... | |
| The object of this standard is to establish standard test procedures for semiconductor charged-particle detectors. These detectors are in wide-spread use for the detection and high resolution spectroscopy of charged... | |
| The power factor tip-up testing of stator coils and bars for use in large electric machinery is covered in this recommended practice. | |
| The power factor tip-up testing of stator coils and bars for use in large electric machineryis covered in this recommended practice. | |
| The power supplied to elements in an electronic design affects the way circuits operate. Although this is obvious when stated, today’s set of high-level design languages have not had a... | |
| The procedure for quality control testing of external discharges on stator coils, bars and windings of large air-cooled ac electric machines is described in this recommended practice. | |
| The protection of motors used in industrial and commercial power systems is covered. It is likely to be of greatest value to the power-oriented engineer with limited experience in the... | |
| The protocol, data encapsulations, and presentation time procedures used to ensure interoperability between audio- and video-based end stations that use standard networking services provided by all IEEE 802 networks meeting... | |
| The protocol, device discovery, connection management, and device-control procedures used to facilitate interoperability between audio- and video-based end stations that use IEEE 1722-based streams on IEEE 802-based networks are specified. | |
| The purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agre ed set of standards for software testing that can be used by any organization... | |
| The purpose of this document is to facilitate the joint usage of the process content of the latest revisions of both ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207, by providing unified and... | |
| The purpose of this recommended practice is to describe the power-factor tip-up of coil insulation and to establish preferred procedures for its measurement. This recommended practice applies to stator coils... | |
| The recommendations contained in this document are based upon the following premises, which are believed to represent the broadest base of general agreement among proponents of the major unit systems... | |
| The selection and application of controllers and automation to industrial and commercial power systems is covered by this recommended practice. It is likely to be of greatest value to the... | |
| The selection and application of instrument transformers used in industrial and commercial power systems are covered in this recommended practice. | |
| The selection and application of power distribution apparatus used in industrial andcommercial power systems are covered in this recommended practice. It is likely to be of greatestvalue to the power-oriented... | |
| The set of changes required to address technical and editorial errors that have been identified in IEEE Std 1801-2013 are specified in this amendment. In addition this amendment also specifies... | |
| The standard defines the building blocks comprising (i) network resource managers, (ii) device resource managers, and (iii) the information to be exchanged between the building blocks, for enabling coordinated network-device... | |
| The standard describes remote control architecture of digital community, intelligent building groups, and digital metropolitan networks; specifies interactive data format between devices and systems; and gives a standardized generalization of... | |
| The standard identifies gateways for field-bus networks, data storage for archiving and developing data sharing platforms, and application units as important system components for developing digital communities, i.e., building-scale and... | |
| The standard presents definitions of hybrid computer linkage components terms from analog to digital converters to multiplying DAC. Each term is accompanied by definitive text and cross referencing.<> | |
| The standardisation of methods of testing radio telegraph transmitters is considered. The classification of tests to be performed is discussed, and specific methods of measuring power output, spurious transmitter output,... | |
| The steps and procedures a user should undertake to implement an IEC 61850 substation in both a single and multi-vendor equipment environment are outlined in this recommended practice. Intelligent electronic... | |
| The system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment is described. The existing IEEE 802.3 and IEEE 802.1 standards, which ensure the interoperability... | |
| The SystemC(R) Analog/Mixed-Signal (AMS) extensions are defined in this standard. SystemC AMS is an ANSI standard C++ class library for electronic system-level design and modeling for use by system architects... | |
| The technical requirements, tests, inspection rules, sign, and package of insulation-piercing connector used in aerial insulated cable lines, bridges and culverts, galleries, tunnels, mines, cable wells, etc., for rated voltages... | |
| The terms and definitions used in the field of ultrawideband radar are organized and standardized in this document. | |
| The Universal Verification Methodology (UVM) that can improve interoperability, reduce the cost of using intellectual property (IP) for new projects or electronic design automation (EDA) tools, and make it easier... | |
| The various existing technologies that are used or can be used to monitor the temperature of cable systems are reviewed in this guide. The conventional technologies, like thermocouples and resistance... | |
| These test procedures are to bring up to date the IRE "Standards on Facsimile-Temporary Test Standards-1943" (43 IRE 9.S1). In part there has been new experience and technological advance since... | |
| This document amends IEEE Std 269-2002. | |
| This document contains provisions for the processes and products related to the engineering of requirements for systems and software products and services throughout the life cycle. It defines the construct... | |
| This document defines a normalized taxonomy for systems of systems (SoS) to facilitate communications among stakeholders. It also briefly explains what a taxonomy is and how it applies to the... | |
| This document defines a standard protocol for secure authentication and creation of trust between a secure host and a directly attached Transient Storage Device (TSD), such as a USB flash... | |
| This document defines recommended practices for World Wide Web page engineering for Intranet and Extranet environments, based on World Wide Web Consortium (W3C) and related industry guidelines. This recommended practice... | |
| This document has been developed as a recommended practice for electrical distribution systems in cement plants with the objective of satisfactory equipment utilization, reliability, performance, safety, and low maintenance—all at... | |
| This document includes a definition of the concept of modulation frequencies for light-emitting diodes (LEDs), a discussion on their applications to LED lighting, a description of LED lighting applications in... | |
| This document is a companion to Technical Committee Report on Recommended Practices for Burst Measurements in the Time Domain, IEEE No. 257, May 1964. In the time domain document, bursts... | |
| This document is a Report on the state-of-the-art of measuring field strength of radio-frequency electromagnetic waves, with respect to available and desireable accuracies, general principles of measurement techniques and calibration... | |
| This document presents standard letter symbols for quantities used in the field of thermoelectric devices. | |
| This document provides a common vocabulary applicable to all systems and software engineering work. It was prepared to collect and standardize terminology. This document is intended to serve as a... | |
| This document provides a set of critical considerations to be addressed at key points in the life cycle of systems created by humans. This document refers to a constituent system... | |
| This document provides guidance for evaluation of the characteristics and performance of Sodium-Beta batteries by a potential user for stationary applications. Information regarding technology description, safety, aging and failure modes,... | |
| This document provides users of computer hardware, firmware, software, or data systems with recommended practices for assessing and demonstrating the system elements within their organization that may be at risk... | |
| This document represents a revision of material contained in the previous edition of IEEE Standard No. 172 (54 IRE 12.S1) and IEEE Standard No. 174. In addition, there has been... | |
| This document specifies a framework for the automatic test markup language (ATML) family of standards. ATML allows automatic test system (ATS) and test information to be exchanged in a common... | |
| This document specifies an exchange format, using the extensible Markup Language (XML), for exchanging the test description information defining test performance, test conditions, diagnostic requirements, and support equipment to locate,... | |
| This document specifies an exchange format, using XML, for identifying all of the hardware, software, and documentation associated with a unit under test (UUT). This UUT may be tested and... | |
| This document specifies an exchange format, utilizing XML, for identifying the test configuration used to test and diagnose a unit under test (UUT) on an automatic test system (ATS). | |
| This document specifies requirements and procedures for managing information for users throughout the software-, services-, and systems-development life cycle. It applies to people or organizations producing suites of information, to... | |
| This document specifies the framework for the family of ATML standards. ATML defines a standard exchange medium for sharing information between components of an Automatic Test System (ATS), utilizing the... | |
| This document specifies the standard approach for mapping between IEEE Std 1815(TM) [Distributed Network Protocol (DNP3)] and IEC 61850 (Communications Networks and Systems for Power Utility Automation). Two primary use... | |
| This document summarizes current electrical engineering methods and practices for applying power electronics in Electrical Power Systems on Ships. It describes analytical methods, preferred parameters and performance characteristics from a... | |
| This document supersedes IEEE Std 28-1972 (ANSI C62.1-1971) and revises many portions of the previous edition. Three new significant design tests have been added to determine: (1) The highest 1.2... | |
| This document supports the need for software users to receive consistent, complete, accurate, and usable documentation. This document was developed to assist those who review, assess, and test software user... | |
| This guide adopts ISO/IEC TR 24748-1:2010, which provides information on life cycle concepts and descriptions of the purposes and outcomes of representative life cycle stages. It also illustrates the use... | |
| This guide applies the smart grid interoperability reference model (SGIRM) process (IEEE Std 2030(TM)-2011) to energy storage by highlighting the information relevant to energystorage system (ESS) interoperability with the energy... | |
| This guide applies to voltage and reactive power control in 1000 kV and above ac systems. It establishes criteria and requirements for electric power utilities in the planning, design, infrastructure,... | |
| This Guide has been prepared to aid in the effective application of relays and other devices for the protection of power transformers. It supplements information that was previously published in... | |
| This guide is specifically prepared for a PV/engine generator hybrid power system, but may also be applicable to all hybrid power systems where there is at least one renewable power... | |
| This guide provides methods for designing 110kV-1000kV AC overhead transmission lines and may also be used as reference for the design of lower voltage overhead transmission lines. The principles and... | |
| This IEEE Standards product is part of the Color Books family. A guide and general reference on electrical design for commercial buildings is provided. It covers load characteristics; voltage considerations; | |
| This IEEE Standards product is part of the Color Books family. System protection and coordination serve to minimize damage to a system and its components, thereby limiting the extent and... | |
| This International Standard provides requirements for the management of the content used in product life cycle, software, and service management system documentation. Content management allows an organization to control the... | |
| This is a revision of a standard for the usual and unusual service conditions for power system communication equipment. It is similar to service conditions for relays, automatic station supervisory... | |
| This NACE/IEEE joint standard provides general coating repair guidelines for in-service carbon steel and galvanized steel electric transmission structures coated with polyurethanes, moisture cure urethane (MCU), coal tar, epoxy, coal... | |
| This NACE/IEEE joint standard provides requirements to (1) help electric utilities identify structures that may be at a high risk for below-grade corrosion; (2) excavate and inspect the selected structures; | |
| This project defines a standard protocol for secure authentication and creation of trust between a secure host and a directly attached Transient and other Storage Devices, such as a USB... | |
| This project defines a standard protocol for secure authentication and creation of trust between a secure host and a directly attached Transient Storage Device (TSD), such as a USB flash... | |
| This recommended practice addresses activities related to preferred power supply (PPS) reliability, including design considerations, analytical studies, operational and maintenance considerations, and interface agreements between a nuclear power generating station... | |
| This recommended practice covers the instrumentation and metering of industrial and commercial powersystems. It describes the importance of metering to achieve a successful energy management process, aswell as considerations that... | |
| This recommended practice describes data supporting the reliability evaluation of existing industrial and commercial power systems. It is likely to be of greatest value to the power-oriented engineer with limited... | |
| This recommended practice specifies the procedure for selection of insulation levels of UHV AC transmission lines and substations. It also specifies reliability criterion under switching overvoltage and lightning overvoltage. It... | |
| This recommended practice will provide technical guidelines for analyzing the potential for coexistence or in contrast interference between radio systems operating in the same frequency band or between different frequency... | |
| This specification defines the requirements for a single-degree-of-fre edom spring-restrained rate gyro for [aircraft, missile, spacecraft,______] applications. The rate gyro shall be capable of providing [(dc, ac) voltage outputs proportional... | |
| This standard addresses the following: Risk-informed methods have been established to appropriately categorize components as either safety significant or low safety significant. Application of these methods has been shown to... | |
| This standard applies to outdoor power class apparatus bushings which have basic impulse insulation levels of 100 kV and above for use as components of oil-filled transformers, oil-filled reactors, and... | |
| This standard applies to semiconductor radiation detectors that are used for the detection and high-resolution spectroscopy of charged particles. The measurement techniques described were selected to be readily available to... | |
| This standard defines a cryptographic protocol to provide integrity with optional confidentiality for cyber security of substation serial links. It does not address specific applications or hardware implementations and is... | |
| This standard defines a set of tools to support specific audio coding functions including general audio coding and lossless audio coding. The tool set defined in this standard, in combination... | |
| This standard defines a vendor-independent set of policy-based control architectures and corresponding policy language requirements for managing the functionality and behavior of dynamic spectrum access networks. | |
| This standard defines security requirements (all aspects of security including but not limited to authentication, authorization, privacy, integrity, device management, physical security, and information security) for manufacturers, users, and others... | |
| This standard defines system engineering and management requirements for the life cycle of websites, including strategy, design, engineering, testing and validation, and management and sustainment for Intranet and Extranet environments. | |
| This standard defines the air interface for radiating transceiver radio tags using long wavelength signals (kilometric and hectometric frequencies, <450 kHz). Conforming devices can have very low power consumption (a... | |
| This standard defines the requirements and guidelines for test method specifications and test method implementations for measuring conformance to POSIX standards. Test specification standard developers for other Application Programming Interface... | |
| This standard defines the test method specifications for IEEE Std 1003.1b-1993 (based on the document corresponding to the merger of IEEE Std 1003.1-1990 and IEEE Std 1003.1b-1993). The test method... | |
| This standard describes a methodology for accessing instrumentation embedded within a semiconductor device without defining the instruments or their features themselves, via the IEEE 1149.1 Test Access Port (TAP) and/or... | |
| This standard describes a modification of existing techniques which allows for the measurement of a receiver employing a ferrite core loop antenna with the same precision as that obtained in... | |
| This standard describes heterogeneous networks convergence and scalability, specifies the requirements of network convergence, extends the system architecture defined in IEEE Std 1888(TM), IEEE Standard for Ubiquitous Green Community Control... | |
| This standard describes network gateway access, control, and management; specifies control and management requirements; defines the system architecture, communication sequences, and enhanced functions for the protocols defined in IEEE 1888™,... | |
| This standard describes network gateway access, control, and management; specifies control and management requirements; defines the system architecture, communication sequences, and enhanced functions for the protocols defined in IEEE 1888(TM),... | |
| This standard describes the International System of Units (SI), the modern version of the metric system. It includes listings of the base units, supplementary units, and units derived therefrom. Guidance... | |
| This standard describes the system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment. The specifications complement the existing IEEE 802.3 and IEEE 802.1 standards,... | |
| This standard establishes criteria for design analysis for quality, and establishes criteria for reliability of rechargeable Li-Ion and Li-Ion Polymer batteries for mobile telephone applications. Also included in the standard... | |
| This standard lists technical terms and their definitions that have been adopted by, or coined for,the television broadcasting industry. It is mainly a combination of two earlier standards: IEEE Std201-1955,... | |
| This standard on piezoelectricity contains many equations based upon the analysis of vibrations in piezoelectric materials having simple geometrical shapes. Mechanical and electrical dissipation are never introduced into the theoretical... | |
| This standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a square loop core material as defined below with normal operation into the saturation... | |
| This standard pertains to power transformers and inductors that are used in electronic equipment and supplied by power lines or generators of essentially sine wave or polyphase voltage. Guides to... | |
| This standard presents approximately 100 terms, and their definitions, for accurately and precisely describing the waveforms of pulse signals and the process of measuring pulse signals. Algorithms are provided for... | |
| This standard presents the combined efforts of IEEE Subcommittee P287 that reflect the knowledge and experience of leading specialists in the development and measurement of precision coaxial connectors from dc... | |
| This standard provides a procedure that shall be used to (1) assess structures for atmospheric corrosion; (2) assess the level of risk to the structure in terms of corrosion attack... | |
| This Standard provides a uniform system of letter symbols for electrical quantities and parameters as applied to semiconductor devices. It is divided into three Sections: (1) electrical quantities, dealing primarily... | |
| This standard provides concepts, definitions, remediation techniques, and other supporting terms fundamental to a lexicon for Year 2000 terminology. It addresses key topics pertinent to the development of resolutions to... | |
| This standard provides definitions and descriptions of the techniques and procedures for time domain pulse measurements. The definitions and descriptions provided are independent of specific devices, apparatus, instruments, or computing... | |
| This standard provides fundamental definitions for general use in time domain pulse technology. It defines terms for pulse phenomena and pulse parameters which are prerequisite to: efficient communication of technical... | |
| This standard provides general requirements, directions, and methods for qualifying fiber optic cables, connections, and optical fiber splices for use in safety systems of nuclear power generating stations, including fuel... | |
| This standard provides multi-source and "plug and play" environment for the millions of metering devices in the field now and the future using the ANSI Type 2 optical port interface. | |
| This standard provides multisource and "plug and play" environment for the millions of metering devices in the field now and in the future using the telephone modem communication interface. It... | |
| This standard provides requirements for the design and development of software user documentation as part of the life cycle processes. It defines the documentation process from the viewpoint of the... | |
| This standard provides requirements for the test and review of software user documentation as part of the life cycle processes. It defines the documentation process from the viewpoint of the... | |
| This standard provides uniform measurement procedures for determining the shielding effectiveness of electromagnetic (EM) shielding for a variety of enclosures and boxes having all dimensions between 0.1 m and 2... | |
| This standard replaces IEEE 830-1998, IEEE 1233-1998, IEEE 1362-1998. ISO/IEC/IEEE 29148:2011 contains provisions for the processes and products related to the engineering of requirements for systems and software products and... | |
| This standard represents a merger of two previous standards: IEEE 1364-2005 Verilog hardware description language (HDL) and IEEE 1800-2005 SystemVerilog unified hardware design, specification and verification language. The 2005 SystemVerilog... | |
| This standard represents a merger of two previous standards: IEEE Std 1364(TM)-2005 Verilog hardware description language (HDL) and IEEE Std 1800-2005 SystemVerilog unified hardware design, specification, and verification language. The... | |
| This standard represents a revision of material contained in the previous edition of IEEE Std 172-1971. The committee reviewed all of the terms, selected those which it considered appropriate, and... | |
| This standard revises IEEE Std 2000.1-1998. It provides a detailed set of definitions. Inaddition, it addresses calendar information that is helpful in understanding the timeline issues surrounding the year 2000... | |
| This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE 1904.1 Package A. | |
| This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE 1904.1 Package B. | |
| This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE 1904.1 Package C. | |
| This standard specifies basic interval arithmetic (IA) operations selecting and following one of the commonly used mathematical interval models. This standard supports the IEEE 754 floating point formats of practical... | |
| This standard specifies the framework for the family of ATML standards. ATML defines a standard exchange medium for sharing information between components of an Automatic Test System (ATS), usng the... | |
| This standard specifies the media presentation description (MPD) format and media segment format for dynamic and adaptive streaming over networks such as Hypertext Transfer Protocol (HTTP). | |
| This standard specifies the protocol, device discovery, connection management and device control procedures used to facilitate interoperability between audio and video based End Stations that use IEEE 1722 based Streams... | |
| This standard supports test case design and execution during any phase or type of testing (e.g., unit, integration, system, acceptance, performance, usability, reliability). | |
| This test code pertains to tests on apparatus bushings themselves apart from tests on the assembled apparatus. | |
| This test procedure covers instructions for conducting and reporting the more generally applicable and acceptable tests to determine the performance characteristics of polyphase induction motors having liquid in the magnetic... | |
| This trial use standard defines a cryptographic protocol to provide integrity, and optional confidentiality, for cyber security of serial links. It does not address specific applications or hardware implementations, and... | |
| This trial-use standard specifies an exchange format, using eXtensible Markup Language (XML), for identifying instrumentation that may be integrated in an automatic test system (ATS) that is to be used... | |
| Tools for description of visual content, including still images and videos, are specified in this standard. Visual content description consists of visual features, text labels, and device information. This standard... | |
| Traction power systems experience some of the most extreme variations in local power loads as compared to most other large scale electric power supply networks. These variations create challenges in... | |
| Two standard methods for field-strength measurement are described. The standard-antenna method consists of measuring the received power or open-circuit voltage developed in a standard receiving antenna by the field to... | |
| Uniform measurement procedures and techniques are provided for determining the effectiveness of electromagnetic shielding enclosures at frequencies from 9 kHz to 18 GHz (extendable to 50 Hz and 100 GHz,... | |
| Uniform measurement procedures and techniques are provided for determining the effectiveness of room-sized, high-performance electromagnetic shielding enclosures at frequencies from 14 kHz to 18 GHz (extendable to 50 Hz and... | |
| Uniform measurement procedures and techniques are provided for determining theeffectiveness of electromagnetic shielding enclosures at frequencies from 9 kHz to 18 GHz(extendable to 50 Hz and 100 GHz, respectively) for... | |
| Uniform procedures for the testing of transmission line and station bus hardware in high voltage laboratories are established in this guide. Two tests are described: the first is a visual... | |
| Usual Temperature and Altitude Service Conditions-Equipment conforming to this Standard shall be suitable for operation at its standard rating, provided that:(a) The temperature of the cooling air (ambient temperature) does... | |
| Utilizing terminology as established in IEEE Std 2755-2017, defined and classified in this guide are approximately 150 features and functions across five core areas of technology capability in the family... | |
| Voltage conditions that may arise at publicly and privately accessible locations as a result of the delivery and use of electrical energy are addressed in this guide. This guide is... | |
| Withdrawn Standard June 1984. These criteria established minimum requirements for the safety-related functional performance and reliability of protection systems for stationary land-based nuclear reactors producing steam for electric power generation. |
| << Prev | Next >> |