IEEE - Institute of Electrical and Electronics Engineers, Inc. Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| " Identification markings of jacketed underground power cables and ducts are establishedin this guide. Included are various methods of identifying underground power cables and ducts, andthe visual, chemical, and mechanical... | |
| " Instructions are given for conducting and reporting the more generally applicable andacceptable tests to determine the performance characteristics of single phase induction motors.Electrical measurements, performance testing, temperature tests, and... | |
| " Realistic and repeatable criteria, as well as recommended test methods, for characteriz-ing the absorption properties of typical anechoic chamber linings applied to a metallic surface aredescribed. Parameters and test... | |
| " The testability structure for digital circuits described in IEEE Std 1149.1-1990 has beenextended to provide similar facilities for mixed-signal circuits. The architecture is described, togetherwith the means of control... | |
| "The purpose of this trial-use standard is to provide common terminology and test methods for describing the performance of waveform recorders. Since these devices give only digital answers that are... | |
| A basic philosophy and guidelines are established for the design and implementation of monitoring systems for cylindrical-rotor, synchronous turbine generators. Monitoring systems are used to display the status of the... | |
| A concise overview of shielding options for various types of interference and recommendations on shielding practices, including suggestions on terminating and grounding methods, are provided. | |
| A concise overview of shielding options for various types of interference is discussed in this guide. Recommendations on shielding practices for low voltage cables are given. Suggestions on terminating and... | |
| A consistent way to measure the elements that go into computing software productivity is defined. Software productivity metrics terminology are given to ensure an understanding of measurement data for both... | |
| A data model, called the plant information network, that standardizes categories of generating plant data and data relationships, is presented. Guidelines are provided for using the model to integrate computer-aided... | |
| A file format suitable for exchanging power quality related measurement and simulation data in a vendor independent manner is defined in this recommended practice. The format is designed to represent... | |
| A generic specification, including design and testing, for transmission modular restoration structure components used by electric utilities is provided. | |
| A generic standard that may be applied in all fields of electronics where equipment and installations are required to conform to the 482.6 mm (19 in) equipment practice based on... | |
| A guide for developing test procedures for the functional testing of insulation systems used in long-life electrical equipment exposed to more than one factor of influence in service is presented. | |
| A local area network (LAN) for the interconnection of computers and medical devices is defined by the specifications and guidelines set forth in this standard. The functions, features, and protocols... | |
| A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described in this recommended practice. Sizing batteries... | |
| A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described. Sizing batteries for hybrid or grid-connected... | |
| A method for sizing both vented and valve-regulated lead-acid batteries used in terrestrial photovoltaic (PV)systems is described.Installati on,maintenance,safet y,testing procedures,and consideration of battery types other than lead-acid are beyond the... | |
| A method for sizing nickel-cadmium battery storage subsystems used in residential, commercial, and industrial photovoltaic (PV) systems is described. | |
| A methodology for establishing quality requirements and identifying, implementing, analyzing and validating the process and product software quality metrics is defined. The methodology spans the entire software life-cycle. | |
| A methodology for establishing quality requirements and identifying, implementing, analyzing, and validating the process and product of software quality metrics is defined. The methodology spans the entire software life cycle. | |
| A normative definition of communication between personal telehealth International Normalized Ratio (INR) devices (agents) and managers (e.g., cell phones, personal computers, personal health appliances, and set top boxes) is established... | |
| A physical interface for the interconnection of computers and medical devices in the 1073 family of standards is defined. This interface is intended to be highly robust in an environment... | |
| A physical interface for the interconnection of computers and medical devices in the IEEE 1073 family of standards is defined. This interface is intended to be highly robust in an... | |
| A practical method for determining the magnetic-field characteristics of a telephone receiver by means of objective measurements in a test connection is described. The method was developed in response to... | |
| A reference model that provides a common interpretation basis by which tools can express and communicate the observable features of system/software behavior to users and to other tools is presented. | |
| A report is given on the IEEE Standard for VHDL waveform and vector exchange to support design and test verification (WAVES) Language Reference Manual. This standard is a formal notation... | |
| A serial control bus for interdevicehtrabuild ing as well as intrasite interconnection of microcontrollers is described. The bus, which is defined for (but not limited to) microcontrollers and devices with... | |
| A serial, full-duplex, asynchronous, 9-pin data terminal equipment (DT ) communications port for programmable instrumentation that follows ANSI/TIA/ IA-574-1990 and related standards is defined in this standard | |
| A series of analyses of various problems regarding the interpretation of the VHSIC Hardware Description Language (VHDL) was carried out by VHDL experts on the VHDL Analysis and Standardization Group,... | |
| A set of procedures to be followed to cope with reradiation of AM broadcast signals from power lines and other large metallic structures is provided. Reradiation may be described as... | |
| A set of useful quality considerations that can be selected and applied during one or more steps in a software acquisition process is described in this recommended practice. The recommended... | |
| A standard format for data interchange used to transfer multichannel pulse height data on magnetic media between laboratories is provided. The terms used in file records are defined. The contents... | |
| A standard syntax and semantics for VHDL register transfer level (RTL) synthesis is defined. The subset of IEEE 1076 (VHDL) that is suitable for RTL synthesis is defined, along with... | |
| A structured framework for the incorporation of human reliability analysis (HRA) into probabilistic risk assessments (PRAs) is provided in this guide. To enhance the analysis of human/system interactions in PRAs,... | |
| A structured framework for the incorporation of human/system interactions into probabilistic risk assessments is provided. | |
| A test procedure for comparing expected life, at rated temperature, of two or more sealed insulation systems is outlined. The procedure is limited to insulation systems for ac electric machines... | |
| A uniform method for calculating and measuring torque pulsations that occur during starting of synchronous motors is provided. Synchronous motors, as discussed in this guide, applies to all types of... | |
| Accelerated insulation test procedures usually call for a number of specimens to be aged at each of several temperatures appreciably above normal operating temperatures. High temperatures are chosen to produce... | |
| Additional dimensions that will ensure mechanical interchangeability of subracks and plug-in units based on IEEE P1101.1 (D1.0, 1997), IEEE Std 1101.10-1996, and the environmental requirements of IEC 61587-1 (May 1998-Draft)... | |
| Administratively withdrawn January 2007 A common bus architecture (which includes functional components--modules, nodes,and units--and their address space, transaction set, CSRs, and configuration information) suitablefor both parallel and serial buses is... | |
| Administratively withdrawn This guide provides supporting information to assist users applying the IEEE Std 1044-1993, IEEE Standard Classification for Software Anomalies to decide whether to conform completely or just extract... | |
| Adminstratively withdrawn 1999. The evaluation and selection of CASE tools supporting software engineering processes, including project management processes, predevelopment processes, development processes, postdevelopment processes, and integral processes, are addressed. The... | |
| Adoption of IEEE Std 11073-10404-2008. Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth pulse... | |
| Adoption of IEEE Std 11073-10407-2008. Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth blood... | |
| Adoption of IEEE Std 11073-10408-2008 Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth thermometer... | |
| Adoption of IEEE Std 11073-10415-2008. Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth weighing... | |
| Adoption of IEEE Std 11073-10417-2009. Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth glucose... | |
| Aiding in the comprehension and use of IEEE VHDL, this unique product offers a comprehensive & reliable tutorial on VHDL - not available anywhere else. An enhancement to IEEE Std... | |
| All relevant behavior and states of the Media Management System (MMS) and the Media Manager (MM) from the time the MMS application successfully establishes a session with the MM, until... | |
| An approach to preparing a specification for a transmission static var compensator is documented by this guide. The intention of this document is to serve as a base specification with... | |
| An architecture for the interconnection of IEEE 802 Local Area Networks (LANs) below the level of the MAC Service, which is transparent to logical link control (LLC) and higher layer... | |
| An integrated approach to systematic and documented unit testing is defined. It uses unit design and unit implementation information, in addition to unit requirements, to determine the completeness of the... | |
| An introduction to the physics unique to this type of memory and an overview of typical array architectures are presented. The variations on the basic floating gate nonvolatile cell structure... | |
| Application program interfaces (APIs) to X.400-based electronic messaging services are defined in terms that are independent of any particular programming language. A general-purpose API that makes the functionality of a... | |
| As a part of the family of IEEE ABBET(R) standards, this guide facilitates an understanding of the relationships of IEEE ABBET(R) 1226-1993 and its component standards, as well as the... | |
| Assisting users in specifying the functional requirements for transmission static synchronous compensator (STATCOM) systems using forced commutated technology based on voltage sourced converter topologies is the purpose of this guide. | |
| Categorizes three direct-axis and four quadrature-axis models, along with the basic transient reactance model. Discusses some of the assumptions made in using various models and presents the fundamental equations and... | |
| Circuitry that may be built into an integrated circuit to assist in the test, maintenance and support of assembled printed circuit boards and the test of internal circuits is defined. | |
| Circuitry that may be built into an integrated circuit to assist in the test, maintenance, and support of assembled printed circuit boards is defined. The circuitry includes a standard interface... | |
| Circuitry that may be built into an integrated circuit to assist in the test, maintenance, and support of assembled printed circuit boards, assembled multi-die packages, and the test of die... | |
| Communication services to support information exchange between simulation applications participating in the Distributed Interactive Simulation (DIS) environment are defined. These communication services describe a connectionless information transfer that supports real-time,... | |
| Computer-Aided Software Engineering (CASE) tools are used to describe the behavior of software using a variety of different design notations. These may be graphical or textual in nature, or may... | |
| Computers, computer-like products, and equipment using solid-state power conversion have created entirely new areas of power quality considerations. There is an increasing awareness that much of this new user equipment... | |
| Corrected English unit conversions are included in this corrigendum to IEEE Std 1202-2006. | |
| Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable pulling lubricants are used... | |
| Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to... | |
| Data interchange and standard software services for test and diagnostic environments are defined by Artificial Intelligence Exchange and Service Tie to All Test Environments (AIESTATE). The purpose of AI-ESTATE is... | |
| Data messages, known as Protocol Data Units (PDUs), that are exchanged on a network among simulation applications are defined. These PDUs are for interactions that take place within specified domains... | |
| Data messages, known as protocol data units (PDUs), that are exchanged on a network between simulation applications are defined. These PDUs are for interactions that take place within specified domains... | |
| Definitions and uniform procedures for review and audit applicable to both critical and noncritical software are provided. The processes include management review, technical review, software inspection, walkthrough, and audit. The... | |
| Describes the form and content of a software engineering standards taxonomy. Applicability is not restricted by software application, size, complexity, criticality, or hardware environment. This taxonomy applies to standards (from... | |
| Description of the electrical control and monitoring requirements for equipment and systems associated with small (100 kVA to 5 MVA) hydroelectric power plants. | |
| Descriptive material intended to assist in the planning for design, development, and operation of small hydroelectric power plant control systems is presented. The controlled electrical and mechanical systems and equipment... | |
| Design information and procedures for the interconnection of multiple wind turbines (a windfarm generating station) with an electrical utility are presented. Issues relating to the interface with the utility and... | |
| Detailed information relating to the design, testing, application and installation of various types of electrical cables in order to prevent the deleterious effect of moisture and chemical ingress and resultant... | |
| Digital recorders and digital oscilloscopes used for measurements during tests with high-impulse voltages and high-impulse currents are considered. Terms specifically related to the digital recorders used for monitoring high-voltage and... | |
| Electrical, dimensional, and mechanical characteristics are covered, taking intoconsideration certain safety features, for current and inductively coupled voltage transformers oftypes generally used in the measurement of electricity and the control... | |
| Electronics wide-band transformers transmitting power within a wide band of frequencies covering typically at least one decade in the frequency spectrum are covered in this standard. | |
| Errors identified in IEEE Std 1205-2000 are addressed in this corrigendum. | |
| Experience and continuing rapid development in electrical insulation have demonstrated the need for periodic review and revision of this document. During the time since the 1962 revision of this document,... | |
| Extensions to IEEE Std 1149.1(TM) that define the boundary-scan structures and methods required to facilitate boundary-scan-based stimulus of interconnections to passive and/or active components are specified. Such networks are not... | |
| Firmware is the read-only-memory (ROM)-based software that controls a computer between the time it is turned on and the time the primary operating system takes control of the machine. Firmware's... | |
| Firmware is the read-only-memory (ROM)-based software that controls a computer between the time it is turned on and the time the primary operating system takes control of the machine. Open... | |
| Five types of software reviews and audits, together with procedures required for the execution of each type, are defined in this standard. This standard is concerned only with the reviews... | |
| For the benefit of individuals using IEEE Standards, this document contains carefully considered opinions, rationales, and conclusions, arrived at by experts in the field, many of whom were part of... | |
| Formal models for information used in system diagnosis are defined. As part of the AI-ESTATE set of standards, this standard includes several models that form the basis for a format... | |
| Formal software interfaces to system diagnosis tools and applications are defined. As part of the AI-ESTATE set of standards, this standard defines services to manipulate information models as defined in... | |
| Fundamental information on minimum environmental withstand conditions for space electronics is provided. The intent is to achieve uniformity and reproducibility in the test conditions for all spaceborne computer modules that... | |
| Fundamental information on minimum environmental withstand conditions is provided. The information is intended to be used in those cases in which a generic or detail specification for a certain module... | |
| General information on the application and operation of separable connectors is provided in this guide. It is intended to be basic and supplement the manufacturers specific recommendations and established utility... | |
| General recommendations are provided for owners users of motors that need repair as well as owners and operators of establishments that offer motor repair services. The use of this recommended... | |
| General recommendations are provided for users of motors that need repair as well as owners and operators of establishments that offer motor repair services. The use of this recommended practice... | |
| General recommendations for the in-service care, maintenance, and testing of the conductive clothing worn by workers to perform work in high voltage fields. | |
| General recommendations for the in-service care, maintenance, and testing of the conductive clothing worn by workers to perform work in high-voltage fields are presented. | |
| Guidance for controlling or modifying the inductive environment and the susceptibility of affected wire line telecommunications facilities in order to operate within the acceptable levels of steady-state or surge induced... | |
| Guidance for the proper installation of cable in generating stations and industrial facilities is provided. | |
| Guidance in preparing Software Verification and Validation Plans (SVVPs) that comply with IEEE Std 1012-1986 are provided. IEEE Std 1012-1986 specifies the required content for an SVVP. This guide recommends... | |
| Guidance is provided for measuring the electric-field strength, ion-current density, conductivity, monopolar space-charge density, and net space-charge density in the vicinity of HVDC power lines, in converter substations, and in... | |
| Guidance on the planning and design of dc links terminating at ac system locations having low Guidance on the planning and design of dc links terminating at ac system locations... | |
| Guidance to developers of IEEE Std 1232-conformant applications is provided in this guide. A simple doorbell is used as an example system under test to illustrate how the static model... | |
| Guidelines are provided for evaluating and mitigating harmonic induction effects from high-voltage direct current (HVDC) lines on the adjacent telephone communication lines. Specifically, this guide presents methodology and approach for... | |
| Guidelines are provided for Temporary Protective Grounding (TPG) of electric power lines to assist in protection of workers from voltages and currents that might develop at a de-energized worksite during... | |
| Guidelines for assessing, monitoring, and mitigating aging degradation effects on Class 1E equipment used in nuclear power generating stations are provided. This guide also includes informative annexes on aging mechanisms,... | |
| Guidelines for assessing, monitoring, and mitigating aging degradation effects on electrical equipment used in nuclear power generating stations and other nuclear facilities are provided. This guide also includes informative annexes... | |
| Guidelines for establishing criteria for application, performance, interchangeability, tests, life cycle costs, and safety requirements of traction power rectifier transformers are established in this standard. Set forth are the electrical,... | |
| Guidelines for moisture level measurement, moisture data interpretation, and moisture control in gas-insulated transmission class equipment (GIE) are provided. | |
| Guidelines for protective grounding methods for individuals engaged in de-energized overhead transmission and distribution line maintenance are provided. This guide also provides information on the sizing and maintenance of protective... | |
| Guidelines for the application protection, and ratings of equipment for the safe and reliable utilization of shunt power capacitors are provided. This guide applies to the use of 50 and... | |
| his standard augments IEEE Std 1149.1 to improve the ability for testing differential and/or ac-coupled interconnections between integrated circuits on circuit boards and systems. | |
| IEEE Standard | |
| IEEE Std 1003.3-1991, IEEE Standard for Information Technology-Test Methods for Measuring Conformance to POSIX, defines the general requirements and test methods for measuring conformance to POSIX standards. The article is... | |
| IEEE Std 1062, 1998 Edition (R2002), Includes IEEE Std 1062-1993 and IEEE Std 1062a-1998. A set of useful quality practices that can be selected and applied during one or moresteps... | |
| IEEE Std 1137-1991 provides guidance for controlling or modifying the inductive environment and the susceptibility of affected wire line telecommunications facilities in order to operate within the acceptable levels of... | |
| IEEE Std 1149.1(TM) is augmented by this standard to improve the ability for testing differential and/or ac-coupled interconnections between integrated circuits on circuit boards and systems. | |
| IEEE Std 1241-2000 identifies analog-to-digital converter (ADC) error sources and provides test methods with which to perform the required error measurements. The information in this standard is useful both to... | |
| In this IEEE Standard a test method is provided to qualify various essentially nonvolatile, highly viscous fluids or solid materials at 90/spl deg/C, for use with high-voltage cable shields and... | |
| In this standard minimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cable are presented. The cable is round or flat, with ethylene-propylene rubber insulation, nitrile... | |
| In undertaking the preparation of rules for standards for rotating electrical equipment for railway cars and locomotives under the Rules of Procedure of the American Standards Association, it has been... | |
| Information about grounding methods for generating station instrumentation and control (I&C) equipment is provided. The identification of I&C equipment methods to achieve both a suitable level of protection for personnel... | |
| Information is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit breaker, ratings, trip functions, accessories,... | |
| Information on the specification and selection of power, control, and special-purpose cable, as typically used in petroleum, chemical, and similar plants, is provided in this guide. Materials, design, testing, and... | |
| Information on the specification and selection of power, control, and special-purposecable , as typically used in petroleum, chemical, and similar plants, is provided in this guide. Materials, design, testing, and... | |
| Information pertaining to the installation of mobile substation equipment up to 245 kV is provided in this guide. | |
| Inspection procedures and tests for use following the completion of the installation of components and systems through to commercial operation of hydroelectric power plants are provided. This guide is directed... | |
| Installation design, installation, maintenance and testing procedures, and test schedules that can be used to optimize the life and performance of vented nickel-cadmium batteries used for continuous-float operations are provided. | |
| Installation methods to improve cable installation practices in generating stations are provided. These include cable lubrication methods, conduit-cable pulling charts, pull rope selection criteria, pulling attachment methods, and alternative methods... | |
| Instructions are given for conducting and reporting the more generally applicable and acceptable tests to determine the performance characteristics of polyphase induction motors and generators. Electrical measurements, performance testing, temperature... | |
| Instructions are given for conducting and reporting the more generally applicable and acceptable tests to determine the performance characteristics of single phase induction motors. Electrical measurements, performance testing, temperature tests,... | |
| Instructions are given for measuring electrical quantities that are commonly needed to determine the performance characteristics of electric machinery and equipment. Methods are given for measuring voltage, current, power, energy,... | |
| Instructions for conducting and reporting the more generally applicable and acceptable test to determine the performance characteristics of single-phase induction motors are covered in this standard. | |
| Instructions for conducting and reporting the more generally applicable and acceptable tests of polyphase induction motors and generators are covered. | |
| Instructions for conducting generally applicable and accepted tests to determine the performance characteristics of synchronous machines are contained in this guide. Although the tests described are applicable in general to... | |
| Instructions for conducting the more generally applicable and accepted tests to determine the performance characteristics of synchronous machines are contained in this guide. Although the tests described are applicable in... | |
| Instrumentation and control (I&C) equipment grounding methods to achieve both a suitable level of protection for personnel and equipment, and suitable electric noise immunity for signal ground references in generating... | |
| Interconnections that need to be understood and evaluated when buying, building, testing, or using Computer-Aided Software Engineering (CASE) tools are described in this recommended practice. This recommended practice is intended... | |
| ISO and IEEE 11073 standards enable communication between medical devices and external computer systems. This standard and corresponding IEEE 11073-104zz standards address a need for a simplified and optimized communication... | |
| ISO/IEC 12207 provides a common framework for developing and managing software. IEEE/EIA 12207.0 consists of the clarifications, additions, and changes accepted by the Institute of Electrical and Electronics Engineers (IEEE)... | |
| ISO/IEEE Dual logo This standard establishes a connection-oriented transport profile and physical layer suitable for medical device communications that use short-range infrared wireless. This standard defines communications services and protocols... | |
| ISO/IEEE Std 11073-30200:2004 is extended in this amendment to include IEEE 802.3 100BASE-T and analysis of the compatibility of cable connections between ISO/IEEE Std 11073-30200:2004 and IEEE Std 802.3TM-2008. | |
| Issues found within IEEE Std 11073-20601-2008 while implementing the standard and/or testing and certifying products are addressed in this amendment. | |
| It has been recognized that a standard was needed for planar transmission lines which are an important transmission medium in hybrid and monolithic circuits. The purpose of this standard is... | |
| It is the purpose of this standard to provide a procedure for determining certain operating characteristics of carbon, carbon-graphite, electrographite, graphite, and metal-graphite brushes under prescribed test conditions for all... | |
| Language and coding standards for the PILOT programming language are described. PILOT (Programmed Inquiry, Learning, Or Teaching) is a language for the development of conversational interactive sequences often used for... | |
| Mechanical characteristics of conduction-cooled versions of Eurocard-based circuit card assemblies are described. This specification is applicable to, but not limited to, the VMEbus standard, an internal interconnect (backplane) bus intended... | |
| Methods and designs to mitigate interruptions and equipment damage resulting from animal intrusions into electric power supply substations thereby improving reliability and minimizing the associated revenue loss are addressed. | |
| Methods are established for performance testing, calibration, and use of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides, assay for radioactivity, and the determination of... | |
| Methods for sizing both vented and valve-regulated lead-acid batteries used with terrestrial photovoltaic (PV) systems are described. The purpose of this document is to assist system designers in sizing batteries... | |
| Methods of describing random instabilities of importance to frequency and time metrology are covered in this standard. Quantities covered include frequency, amplitude, and phase instabilities; spectral densities of frequency, amplitude,... | |
| Methods of describing random instabilities of importance to frequency and time metrology are covered. Quantities covered include frequency, amplitude, and phase instabilities; spectral densities of frequency, amplitude, and phase fluctuations; | |
| Methods of describing random instabilities of importance to frequency and time metrology is covered in this standard. Quantities covered include frequency, amplitude, and phase instabilities; spectral densities of frequency, amplitude,... | |
| Methods of measuring electrical resistance that are commonly used to determine the characteristics of electric machinery and equipment are presented. The methods are limited to those using direct-current or commercial... | |
| Minimum functional and performance characteristics related to speed/load-control systems for steam turbine-generator units that may be interconnected on a power system are recommended. The recommendations apply to the following types... | |
| Minimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump (ESP) cable are presented. The cable is round or flat, with ethylene-propylene rubber insulation, nitrile jacket and... | |
| Minimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cable are presented. The cable is round or flat, with ethylene– propylene rubber insulation, nitrile jacket, ethylene–propylene... | |
| Minimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cable are presented. The cable is round or flat, with polypropylene rubber insulation, nitrile jacket, and armor. | |
| Minimum requirements for the design, construction, manufacturing, testing, purchasing, and application of electric submersible pump (ESP) cable are presented. The cable is round or flat, with ethylenepropylene rubber insulation, nitrile... | |
| Minimum requirements for the design, construction, manufacturing, testing, purchasing, and application of electric submersible pump cable are presented. The cable is round or flat, with polypropylene rubber insulation, nitrile or... | |
| Minimum requirements for the structure and information content of user documentation are provided. They apply primarily to technical substance rather than to style. Editorial and stylistic considerations are addressed only... | |
| Minimum requirements for the structure, information content, and format of user docu-mentation, including both printed and electronic documents used in the work environment by usersof systems containing software, are provided... | |
| More and more substations are becoming necessary, due to the ever increasing load growth being evidenced by most electric utility companies and the requirement to keep pace with the demands... | |
| New guidance to users dealing with premature capacity failures with VRLA batteries and updated definitions are addressed in this amendment. | |
| POSIX.1-2008 is simultaneously IEEE Std 1003.1™-2008 and The Open Group Technical Standard BaseSpecifications, Issue 7. This 2013 Edition includes IEEE Std 1003.1-2008/Cor 1-2013 incorporated into IEEE Std 1003.1-2008 (the base... | |
| POSIX.1-2008 is simultaneously IEEE Std 1003.1(TM)-2008 and The Open Group Standard Base Specifications, Issue 7. This 2016 Edition includes IEEE Std 1003.1-2008/Cor 1-2013 and IEEE Std 1003.1-2008/Cor 2-2016 incorporated into... | |
| Practical methods for measuring the transmission characteristics of telephone handset or headset by means of using a test connection to obtain objective measurements are provided. The obtained test results may... | |
| Problems discovered since the approval of IEEE Std 1003.1-2008 and IEEE Std 1003.1-2008/Cor 1-2013 are addressed. | |
| Procedures and test voltage values for acceptance and maintenance testing of electric submersible pump (ESP) cable systems are presented. This recommended practice applies to cable systems rated 3 kV and... | |
| Procedures and test voltage values for acceptance and maintenance testing of electrical submersible pump (ESP) cable systems are presented. This recommended practice applies to cable systems rated 3 kV and... | |
| Provides guidance for controlling or modifying the inductive environment and the susceptibility of affected wire line telecommunications facilities in order to operate within the acceptable levels of steady-state or surge... | |
| Reaffirmed 2002 Instructions for conducting the more generally applicable and accepted tests to determine the performance characteristics of synchronous machines are contained in this guide.Although the tests described are applicable... | |
| Reaffirmed 2012. Good practice that will improve the ability to assemble and erect self-supporting and guyed concrete pole structures for overhead transmission lines is presented. Construction aspects after foundation installation... | |
| Reaffirmed March 2012. A generic specification, including design and testing, for transmission modular restoration structure components used by electric utilities is provided. | |
| Recommendations are made for conducting and reporting generally acceptable tests to determine the performance characteristics of conventional DC machines. Two categories of tests are provided: tests of dc motors and... | |
| Recommendations are provided for the in-service use, care, maintenance, and electrical testing of conductive clothing, including suits, gloves, socks, and boots, for use on voltages up to 765 kV ac... | |
| Recommendations are provided for the layout and test methods required to characterize properly latchup behavior in CMOS and BiCMOS integrated circuit processes or other processes that have similar lateral PNPN... | |
| Replaced by 1120-2004. IEEE Std 1120-1990, IEEE Guide to the Factors to Be Considered in the Planning, Design, and Installation of Submarine Power and Communications Cables, provides a checklist of... | |
| Replaced by 61691-1-1 Dual-logo document. Revision of the IEEE Std 1076, 2000 Edition Abstract: VHSIC Hardware Description Language (VHDL) is defined. VHDL is a formal notation intended for use in... | |
| Replaced by ISO/IEC 11073-30200:2004. A connection-oriented transport profile and physical layer suitable for medical device communications in legacy devices is established. Communications services and protocols consis-tent with specifications of the... | |
| Replaced by ISO/IEC 14764: 2006. The process for managing and executing software maintenance activities is described. | |
| Replaced by ISO/IEC/IEEE 29148:2011. Guidance for the development of the set of requirements, System Requirements Specification (SyRS), that will satisfy an expressed need is provided. Developing an SyRS includes the... | |
| Replaced by ISO/IEEE 11073-10101-2004. Within the context of the ISO/IEEE 11073 family of standards for point-of-care (POC) medical device communication (MCD), this standard provides the nomenclature that supports both the... | |
| Replaces the IEEE Std 1073.1.1.1-2004. Within the context of the ISO/IEEE 11073 family of standards for point-of-care(POC) medical device communication (MCD), this standard provides the nomenclature that supports both the... | |
| Required procedures for performing design tests for high-voltage distribution class and power class fuses, as well as for fuse-disconnecting switches and enclosed single-pole air switches, are specified. These design tests,... | |
| Revised as IEEE Std 1058-1998. The format and content of software project management plans are prescribed. By software project plan is meant the controlling document that defines the technical and... | |
| Revised by IEEE Std 1202-2006 A test protocol and the performance criteria to determine the flame propagation tendency of cables in a vertical cable tray are established. It applies to... | |
| Revision of IEEE Std 1057-1994. This standard defines specifications and describes test methods for measuring the performance of electronic digitizing waveform recorders, waveform analyzers, and digitizing oscilloscopes with digital outputs. | |
| Revision of IEEE Std 1187-1996. This guide describes methods for selecting the appropriate type of valve-regulated, immobilized-electrol yte, recombinant lead-acid battery for any of a variety of stationary float applications. | |
| Safety precautions, installation design considerations, and procedures for receiving, storing, commissioning, and maintaining pocket and fiber-plate nickel-cadmium storage batteries for photovoltaic power systems are provided. Disposal and recycling recommendations are... | |
| Safety precautions, installation design considerations, and procedures for receiving, storing, commissioning, and maintaining pocket- and fiber-plate nickel-cadmium storage batteries for photovoltaic (PV) power systems are provided. Disposal and recycling recommendations... | |
| Significant community acceptance and environmental compatibility items to be considered during the planning and design phases, the construction period, and the operation of electric supply substations are identified, and ways... | |
| Software verification and validation (V&V) processes determine whether the development products of a given activity conform to the requirements of that activity and whether the software satisfies its intended use... | |
| Software verification and validation (V&V) processes, which determine whether development products of a given activity conform to the requirements of that activity, and whether the software satisfies its intended use... | |
| Standard Docs | |
| Standard frequency generators that include all atomic frequency standards and precision quartz crystal oscillators are addressed. | |
| Standardization of cable flame propagation testing is beneficial to cable manufacturers,distri butors, and users. Uniform procedures; consistent, repeatable results; and measurable testacceptance criteria are required to allow comparisons among competing... | |
| Statistical analyses of data from thermally accelerated aging tests are described. The basis and use of statistical calculations are explained. Data analysis, estimation of the relationship between life and temperature,... | |
| Summary form only given. This standard describes the underlying physics and the operation of floating gate memory arrays, specifically, UV erasable EPROM, byte rewritable E/sup 2/PROMs, and block rewritable "flash"... | |
| SUMMARY: This standard covers construction, mechanical, electrical, and optical performance, installation guidelines, acceptance criteria, test requirements, environmental considerations, and accessories for an all-dielectric, non-metallic, self-supporting fiber optic (ADSS) cable. The... | |
| Superseded by 1031-2000. Guidelines for the application, protection, and ratings of equipment for the safe and reliable utilization of shunt power capacitors are provided. This guide applies to the use... | |
| Superseded by 1043-1996. The voltage endurance testing of form-wound bars and coils for use in large rotating machines is covered. | |
| Superseded by 1048-2003. IEEE Guide for Protective Grounding of Power Lines, provides guidelines for safe protective grounding methods for persons engaged in de-energized overhead transmission and distribution line maintenance. This... | |
| Superseded by 1050-1996. Guidance for the design of grounding systems for instrumentation and control equipment specific to large central generating stations is provided. The goal is to achieve both a... | |
| Superseded by 1067-2005. Recommendations are provided for the in-service use, care, maintenance, and electrical testing of conductive clothing, including suits, gloves, socks, and boots for use on voltages up to... | |
| Superseded by 1070-1995. A generic specification, including design and testing, is provided for transmission modular restoration structure components being widely used today by many electric utilities, both publicly and privately... | |
| Superseded by 1074-1997. The set of Activities that constitute the Processes that are mandatory for the development and maintenance of software, whether stand- alone or part of a system, is... | |
| Superseded by 1076-2002. IEEE standard VHDL language reference manual. | |
| Superseded by 1076.1-2017. This standard defines a collection of VHDL 1076.1 packages, compatible with IEEE Std 1076.1, along with recommendations for conforming use, in order to facilitate the interchange of... | |
| Superseded by 1076.4-2000. The VITAL (VHDL Initiative Towards ASIC Libraries) ASIC Modeling Specification is defined. It creates a methodology that promotes the development of highly accurate, efficient simulation models for... | |
| Superseded by 1101.1-1998 (SH/SS94691) The basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according to IEC 60297-1... | |
| Superseded by 1110-2002. Three direct-axis and four quadrature-axis models are categorized, along with the basic transient reactance model. Some of the assumptions made in using various models, including the basic... | |
| Superseded by 1115-2000. Methods for defining the dc load and for sizing a nickel-cadmium battery to supply that load are described. Installation, maintenance, qualification, testing procedures, and consideration of battery... | |
| Superseded by 112-1991. Instructions are given for conducting and reporting the more generally applicable and acceptable tests to determine the performance characteristics of polyphase induction motors and generators. Electrical measurements,... | |
| Superseded by 112-1996 and 112-2004. Instructions are given for conducting and reporting the more generally applicable and acceptable tests to determine the performance characteristics of polyphase induction motors and generators. | |
| Superseded by 1149.1-2001 A language to describe components that conform to IEEE Std 1149.1-1990 is described in this supplement. The language is based on the VHSIC Hardware Description Language (VHDL). | |
| Superseded by 1187-2002. Recommended design practices and procedures for storage, location, mounting, ventilation, instrumentation, preassembly, assembly, and charging of valve-regulated lead-acid (VRLA) storage batteries are provided. Recommended safety practices are... | |
| Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants... | |
| Superseded by 122-1991. Minimum functional and performance characteristics related to speed/load-control systems for steam turbine-generator units that may be interconnected on a power system are recommended. The recommendations apply to... | |
| Superseded by 1220-2005 The interdisciplinary tasks, which are required throughout a systemÕs life cycle to trans-form customer needs, requirements, and constraints into a system solution, are defined. In addition,the requirements... | |
| Superseded by 12207:2008(E) (IEEE Std 12207-2008). ISO/IEC 12207 provides a common framework for developing and managing software. IEEE/EIA 12207.0 consists of the clarifications, additions, and changes accepted by the Institute... | |
| Superseded by 1246-2002. The design, performance, use, testing, and installation of temporary protective grounding systems, including the connection points, as used in permanent and mobile substations are covered. | |
| Superseded by IEC/IEEE 62243-2005 (SH/SS95359) AI-ESTATE is a set of specifications for data interchange and for standard services forthe test and diagnostic environment. The purpose of AI-ESTATE is to standardize... | |
| Superseded by IEEE Std 1010-2006 Abstract: The control and monitoring requirements for equipment and systems associated with conventional and pumped-storage hydroelectric plants are described. Typical methods of local and remote... | |
| Superseded by IEEE Std 1015-2006 Information is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit... | |
| Superseded by IEEE Std 1074-2006 A process for creating a software life cycle process is provided. Although this standardis directed primarily at the process architect, it is useful to any... | |
| Superseded by IEEE Std 1100-1999. Recommended design, installation, and maintenance practices for electrical power and grounding (including both power- related and signal-related noise control) of sensitive electronic processing equipment used... | |
| Superseded by IEEE Std 1100-2005 Abstract: Recommended design, installation, and maintenance practices for electrical powerand grounding (including both power- related and signal-related noise control) of sensitive elec-tronic processing equipment used... | |
| Superseded by IEEE Std 1106-1995. Maintenance procedures, capacity test schedules, and capacity testing procedures that can be used to optimize the life and performance of nickel-cadmium batteries designed for continuous-float... | |
| Superseded by IEEE Std 1147-2005 This Guide is directed to the practicing engineer in the field of hydroelectric power plant design for the purpose of providing guidance in the decision-making... | |
| Superseded by IEEE Std 1188-2005 Maintenance, test schedules and testing procedures that can be used to optimize the life and performance of valve-regulated lead-acid (VRLA) batteries for stationary applications are... | |
| Superseded by IEEE Std 1189-2007. Methods for selecting the appropriate type of valve-regulated, immobilized-electrol yte, recombinant lead-acid battery for any of a variety of potential stationary float applications are described. | |
| Superseded by IEEE Std 1212-2001 A common bus architecture (which includes functional components—modules, nodes, and units—and their address space, transaction set, CSRs, and configuration information) suitable for both parallel and... | |
| SUPERSEDED BY IEEE STD 1232-2002 This document is the base standard for the AI-ESTATE set of standards. The overall concept of AIESTATE, which is a set of specifications for data... | |
| Superseded by IEEE Std 1268-2005. Information pertaining to the installation of mobile substation equipment up to 230 kV is provided. | |
| Superseded. Guidance is provided to management and engineers who wish to develop an integrated program for the application of human factors engineering (HFE) in the design, operation, and maintenance of... | |
| Superseded. Revision was redesignated 1278.1. Data messages, called protocol data units (PDUs), that are exchanged between simulation applications are defined. These PDUs provide information concerning simulated entity states and the... | |
| Superseded. The overall concept of A Broad-Based Environment for Test (ABBET) is defined, and mandatory requirements for implementations ABBET are specified. The elements of ABBET and their interrelationships are described. | |
| Supersedes Std. 12207.0 and also makes 12207.2 obsolete. This International Standard was jointly developed by ISO/IEC and IEEE. This International Standard establishes a common framework for software life cycle processes,... | |
| Systematic methodology, guidelines and practices for developing turnkey substation specifications are provided in this guide. Guidance on engineering, procurement, construction, testing and commissioning, quality assurance/quality control and training is provided. | |
| Technical Corrigendum 2 addresses problems discovered since the approval of the 2003 edition of The Open Group Base Specifications, Issue 6, IEEE Std 1003.1, and ISO/IEC 9945. These are mainly... | |
| Technical information is provided related to liquid-immersed power transformers insulated with high-temperature materials. Guidelines for applying existing qualified high-temperature materials to certain insulation systems, recommendations for loading high-temperature liquid-immersed power... | |
| Technical progress since 1969 revision of this standard has resulted in general agreement that a number of service stresses or factors, influence the life of electrical insulation, in materials tests... | |
| Terminology and test methods for describing the performance of waveform recorders are presented in this standard. | |
| Terminology and test methods for describing the performance of waveform recorders are provided<> | |
| Terms and their definitions for surface acoustic wave devices are provided. The terms and definitions are given in the following categories: wave-ralated terms, transducer-related terms, and device-related terms. | |
| Test and measurements, which are performed on shielded power cables to identify the location of a fault, are described. Whenever possible, the limitations of a particular test and measurement to... | |
| Test equipment requirements and methods for testing the transmission characteristics of PCM telecommunications equipment, circuits, and systems are set forth. The requirements are intended for certification, installation, pre-service, out-of-service operational,... | |
| Tests and measurements that are performed on shielded power cables to identify the location of a fault are described. Whenever possible, the limitations of a particular test and measurement to... | |
| The application of configuration management (CM) disciplines to the management of software engineering projects is described. For those planning software configuration management (SCM) activities, this guide provides insight into the... | |
| The application of standstill frequency response testing methods for obtaining direct- and quadrature-axis stability parameters is described. Measurable parameters at standstill are discussed, and the test method is described. This... | |
| The application of the Ethernet family (IEEE Std 802.3-2008) of protocols for use in medical device communication is addressed in this document. The scope is limited to referencing the appropriate... | |
| The application, design concepts, and implementation of computer-based control systems for hydroelectric power plant automation is addressed. Functional capabilities, performance requirements, interface requirements, hardware considerations, and operator training are discussed. | |
| The architecture of a distributed, platform-independent system that manages removable media, including both disk and tape, using robotic and manual methods are specified. The general schema for managing media, the... | |
| The base IEEE 11073-10101 Nomenclature is extended by this standard to provide support for ECG annotation terminology. It may be used either in conjunction with other IEEE 11073 standards (e.g.,... | |
| The base nomenclature provided in IEEE 11073 to support terminology for implantable cardiac devices is extended in this standard. Devices within the scope of this nomenclature are implantable devices such... | |
| The basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according to IEC 60297-1 (1986-09) and ANSI/EIA 310-D-1992,... | |
| The basic purpose of IEEE 127 is to serve as a guide to show preferred (steady-state) frequency and voltage ratings for primary power systems. A careful study, was accomplished by... | |
| The basic requirements of interrupter switches used indoors, outdoors, and in enclosures are covered. This standard does not apply to load-break separable insulated connectors. | |
| The characteristics of the various battery energy systems available are described so that users can select the system best suited to their requirements. This guide also describes how the rectifier... | |
| The current interpretation of common logic values and the association of numeric values to specific VHDL array types is described. This standard provides semantic for the VHDL synthesis domain, and... | |
| The design, performance, use, testing, and installation of temporary protective grounding systems, including the connection points, as used in permanent and mobile substations, are covered in this guide. | |
| The design, performance, use, testing, and installation of temporary protectivegrounding systems, including the connection points, as used in permanent and mobile substations,are covered in this guide. | |
| The effects of routing, structure type, insulation, shielding, and grounding on transmission lines are discussed. The way these transmission-line choices will improve or degrade lightning performance is also provided. An... | |
| The electrical, mechanical, and physical requirements of oil-immersed and dry-type air core smoothing reactors for high-voltage direct current (HVDC) applications are specified. Test code is defined and appropriate technical background... | |
| The electrical, mechanical, and physical requirements of oil-immersed and dry-type aircore smoothing reactors for high-voltage direct current (HVDC) applications are specified. Test code is defined and appropriate technical background information... | |
| The following topics were dealt with: This test procedure is a recommended practice for testing utility-interconnect ed static power converters. The test procedure applies to single- and three-phase units rated... | |
| The form and meaning of programs written in the Scheme programming language and in particular, their syntax, the semantic rules for interpreting them, and the representation of data to be... | |
| The format and contents of software project management plans, applicable to any type or size of software project, are described. The elements that should appear in all software project management... | |
| The guidelines are provided for assessing, monitoring, and mitigating degradation of Class 1E equipment used in nuclear power generating stations due to aging. The methods described can be used to... | |
| The guidelines for online monitoring of large synchronous generators are described in this guide. High-level discussions of each of the proposed monitoring methods, and recommended threshold values, whenever there is... | |
| The IEEE Emerald Book(TM) presents a collection of consensus best practices for thepowering and grounding of electronic equipment used in commercial and industrial applications.The main objective is to provide consensus... | |
| The IEEE recommended practice covers distribution suspension type composite insulators made from a core, weathersheds, and metal end fittings that are used in the distribution of electric energy. The recommendation... | |
| The interdisciplinary tasks that are required throughout a system's life cycle to transform customer needs, requirements, and constraints into a system solution are defined. This standard applies to a performing... | |
| The interdisciplinary tasks that are required throughout a system's life cycle to transform stakeholder needs, requirements, and constraints into a system solution are defined. This standard is intended to guide... | |
| The inverse-time characteristics of overcurrent relays are defined in this standard. Operating equations and allowances are provided in the standard. The standard defines an integral equation for microprocessor relays that... | |
| The material presented in this standard is intended to provide common terminology and test methods for the testing and evaluation of analog-to-digital converters (ADCs). This standard considers only those ADCs... | |
| The MATH_REAL package declaration, the MATH_COMPLEX package declaration, and the semantics of the standard mathematical definition and conventional meaning of the functions that are part of this standard are provided. | |
| The methodology for measuring the magnetic field strength in the vicinity of a telephone receiver is described. | |
| The methods given here include measurements, as made with either indicating or integrating instruments, of power, voltage and current in direct current and alternating-current single-phase and polyphase rotating machinery, transformers,... | |
| The monitoring of electrical characteristics of single-phase and polyphase ac power systems is encompassed in this recommended practice. It includes consistent descriptions of conducted electromagnetic phenomena occurring on power systems. | |
| The necessary information content and recommended organization for a software design description are specified. A software design description is a representation of a software system that is used as a... | |
| The operation, functions, and attributes of a parallel system bus (PSB), called MULTIBUS II, are defined. A high-performance backplane bus intended for use in multiple processor systems, the PSB incorporates... | |
| The overall concept of A Broad-Based Environment for Test (ABBET)/sup TM/ is defined, and mandatory requirements for implementation of ABBET are specified. The elements of ABBET and their interrelationships are... | |
| The Portable Applications Standards Committee of the IEEE Computer Society carried out a series of analyses of various problems encountered by users of IEEE Std 1003.1 -1990, IEEE Standard for... | |
| The Portable Applications Standards Committee of the IEEE Computer Society carried out a series of analyses of various problems encountered by users of IEEE Std 1003.2-1992, IEEE Standard for Information... | |
| The Portable Applications Standards Committee of the IEEE Computer Society carried out a series of analyses of various problems encountered by users of IEEE Std 1003.5-1992, IEEE Standard for Information... | |
| The Portable Applications Standards Committee of the IEEE Computer Society carried out a series of analyses of various problems encountered by users of IEEE Std 1224-1993, IEEE Standard for Information... | |
| The procedures for installation described in this guide apply to all types of synchronous generators and generator/motors rated 5 MVA and above to be coupled to hydraulic turbines or hydraulic... | |
| The process for managing and executing software maintenance activities is described. | |
| The proper treatment of the electrical elements of the backplane that provides a physical and electrical connection between different modules in a computer system is covered. Techniques for measuring impedance,... | |
| The protocol syntax and semantics of messages that pass between the Library Manager (LM) and the Media Manager (MM) of an IEEE Media Management System (MMS) are specified. This standard... | |
| The purpose of this ANSI/IEEE proposed recommended practice is to give a common basis of comparison among electronic voltmeters offered for general purpose applications. It is recommended that all manufacturers... | |
| The purpose of this document is to provide guidelines for the application of temperature-measurem ent techniques in measuring the operating temperature and temperature rise of electrical machines, instruments, and apparatus... | |
| The purpose of this IEEE guide is to alert electric utilities, manufacturers of dispersed storage and generation (DSG) equipment, consultants, contractors and DSG owners and operators to the engineering concerns... | |
| The purpose of this recommended practice is to provide a small wind energy conversion system (SWECS) user, owner, or installer with interface guidelines and operating procedures necessary to connect and... | |
| The purpose of this recommended practice is to suggest a set of transmission performance parameters to be used in the development of standards for low bit-rate digital channels between the... | |
| The purpose of this standard is to provide design guidance for the location of fences with respect to live parts within an electric-supply station. The intent of the fence safety... | |
| The purpose of this trial-use standard is to provide common terminology and test methods for describing the performance of waveform recorders. Since these devices give only digital answers that are... | |
| The recommended specification was updated to include the latest practices on the North American continent and the title was changed from a recommended specification to a "Recommended Practice for Preparation... | |
| The Recommended Specifications consist of four sections. Specification Sections II, III and IV are complete purchase specifications. They cover alternate arrangements and performance requirements of speed-governing systems for internal combustion... | |
| The relationship between the two sets of requirements on plans for verification and validation of software, found in IEEE Std 1012-1998 and IEEE/EIA 12207.1-1997, is explained so that users may... | |
| The report provides a checklist and selected guidance, for persons not normally practicing in this specialized field, of major technical design areas that should be considered when interconnecting user-owned and... | |
| The report provides general guidance on the steady-state performance requirements of high-voltage direct-current (HVDC) systems. It concerns the steady-state performance of two-terminal HVDC systems utilizing 12 pulse converter units consisting... | |
| The rules in this division of American Standards cover definitions, classification, rating and and methods of test for rotating electrical machinery forming a part of the power equipment of electrically... | |
| The scope of this standard is upper layer [i.e., the International Organization for Standardization (ISO's) open systems interconnection (OSI) application, presentation layer, and session layer] services and protocols for information... | |
| The services needed to access and manage descriptive information about resources in an automatic test system (ATS) are covered. This information includes data about the automatic test equipment (ATE) instruments,... | |
| The set of activities that constitute the processes that are mandatory for the development and maintenance of software, whether stand-alone or part of a system, is set forth. The management... | |
| The sizing of nickel-cadmium batteries used in full float operation for stationary applications is covered in this recommended practice. | |
| The sizing of nickel-cadmium batteries used in standby operation for stationary applications is discussed in this recommended practice. | |
| The standard covers three areas: the basic dimensions of subracks, this range of modular subracks conforming to IEC 297-3-1984, for mounting in equipment according to IEC 297-1-1986, and ANSI/EIA RS-310,... | |
| The standard test procedure for the thermal evaluation and qualification of electrical insulation systems (EISs) for random-wound ac electric machinery, where thermal degradation is the dominating aging factor, is described. | |
| The syntax and semantics of the protocol messages that pass between the MMS client or MMS module and the MM are described. Since this protocol is only used in the... | |
| The Technical Committee on operating systems and application environments of the IEEE Computer Society carried out a series of analyses of various problems encountered by users of IEEE Std 1003.1-1988,... | |
| The technical requirements to engineer, design, specify, fabricate, manufacture, furnish,install, test, commission, and provide as-built documents for air-insulated substations are covered.This guide investigates the methods, practices, and requirements of both... | |
| The terms defined in the Dictionary are listed in letter-by-letter alphabetical order. Spaces are ignored in this style of alphabetization, so cable value will come before cab signal. Descriptive categories... | |
| The testability structure for digital circuits described in IEEE Std 1149.1-2001 has been extended to provide similar facilities for mixed-signal circuits. The architecture is described, together with the means of... | |
| The use of some electrical equipment attached to typical power systems creates power quality concerns. There is an increasing awareness that some equipment is not designed to withstand the surges,... | |
| The use of some electrical equipment attached to typical power systems creates voltage quality concerns. There is an increasing awareness that some equipment is not designed to withstand the surges,... | |
| The user of underground cables is provided with information on the design, testing, and application of moisture-impervious, medium-voltage, solid dielectric power cable using metal-plastic laminates as moisture barriers. Information is... | |
| The VITAL (VHDL Initiative Towards ASIC Libraries)ASIC Modeling Specification is defined in this standard.This modeling specification defines a methodology which promotes the development of highly accurate, efficient simulation models for... | |
| The voltage endurance testing of form-wound bars and coils for use in large rotating machines is covered. | |
| The Waveform and Vector Exchange Specification (WAVES) is an application of the VHSIC Hardware Description Language (VHDL). This standard covers the dataset structure, header file, WAVES files, external files, execution... | |
| This 2004 Edition includes IEEE Std 1003.1-2001/Cor 1-2002 and IEEE Std 1003.1-2001/Cor 2-2004 incorporated into IEEE Std 1003.1-2001 (the base document). The two Corrigenda address problems discovered since the approval... | |
| This amendment adds a simulation runtime application interface (VHDL Programming Interface or VHPI) to the existing base standard IEEE Std 1076-2002 | |
| This amendment is part of the POSIX series of standards for applications and user interfaces to open systems. It defines the applications interface to basic system services for input/output, file... | |
| This amendment is part of the POSIX series of standards for applications and user interfaces to open systems. It is a supplement to IEEE Std 1003.2-1992, which defines the applications... | |
| This amendment is part of the POSIX series of standards for applications and user interfaces to open systems. The purpose of this project is to specify a set of interfaces... | |
| This amendment provides additional guidance on sizing margins that may be applied when nickel-cadmium batteries are used in stationary applications involving an element of charge-discharge cycling. | |
| This application guide provides information on what a basic faulted circuit indicator (FCI) is designed to do, and describes methods for selecting FCIs. The application of FCIs to single-phase, 200... | |
| This corrigendum corrects the temperature associated with the Stress-Strain clause; and corrects the use of the term velocity in the Aeolian Vibration clause of IEEE Std 1138(TM)-2009. | |
| This dictionary defines terms in the field of Mathematics of Computing. Topics covered include Boolean algebra, number systems, computer arithmetic, complementation, shifts, arithmetic errors, error detection and correction, number conversions,... | |
| This document presents procedures and test voltage values for acceptance and maintenance testing of ESP cable systems. It applies to cable systems rated 3000 V and 5000 V. It is... | |
| This document provides guidance for the proper installation of cable in generating stations, and industrial facilities. | |
| This document provides recommended practices for applying human factors engineering (HFE) to systems and equipment that have significant human interfaces in nuclear power generating stations and other nuclear facilities. | |
| This document specifies a standard for use of very high-speed integrated circuit hardwaredescription language (VHDL) to model synthesizable register-transfer level digital logic. Astandard syntax and semantics for VHDL register-transfer level... | |
| This guide addresses the application, design concepts, and implementation of computer-based control systems for hydroelectric plant automation. It addresses functional capabilities, performance requirements, interface requirements, hardware considerations, and operator training. | |
| This guide addresses the use of radio frequency (RF) wireless technology for the transport of medical data both to and from point-of-care (PoC) medical devices. The context of such wireless... | |
| This guide applies to the use of 50 Hz and 60 Hz shunt power capacitor units rated 2400 Vac and above, and assemblies of such capacitors. Included are guidelines for... | |
| This guide describes methods for selecting the appropriate type of valve-regulated, immobilized-electrol yte, recombinant lead-acid battery for any of a variety of stationary float applications. The purpose of this document... | |
| This guide describes the scope of application and interrelationships for the members of the IEEE 1175 family of standards. It points the reader to the appropriate member standard that addresses... | |
| This guide discusses the preservative treatment of both distribution and transmission wood poles. The guide includes definitions, descriptions of equipment, methods of treatment, information about preservatives, and preparation and specifications... | |
| This guide documents an approach to preparing a specification for a transmission static var compensator. The document is intended to serve as a base specification with an informative annex provided... | |
| This guide documents methods and designs to mitigate interruptions, equipment damage and personnel safety issues resulting from animal intrusions into electric power supply substations, thereby improving reliability and safety, and... | |
| This Guide is based on the knowledge and experience of manufacturers, researchers, and end users of nonceramic insulating products that are electrically stressed in outdoor environments. The standard discusses the... | |
| This guide is intended for the hydroelectric power industry to assist hydroelectric power plant owners, operators, and designers in the economic (feasibility) and technical evaluation (electrical aspects) of existing hydroelectric... | |
| This guide is intended to complement IEEE Std 125, providing application details and addressing the impact of plant and system features on hydroelectric unit governing performance. It provides guidance for... | |
| This guide is intended to complement IEEE Std 125-1988TM, providing application details and addressing the impact of plant and system features upon hydroelectric unit governing performance. It provides guidance for... | |
| This guide is intended to serve high-voltage direct current (HVDC) converter station reliability by suggesting significant objectives, design, operation, monitoring, and specification details. This guide includes the CIGRE performance protocol... | |
| This guide is to serve as a reference document for practicing engineers in the hydroelectric industry. It documents prevailing industry practices in hydroelectric power plant control system logic, control system... | |
| This guide presents a list of factors to consider when planning, designing, installing, and repairing a submarine power cable. | |
| This guide presents an overview of open system concepts and their applications. Information is provided to persons evaluating systems based on the existence of, and interrelationships among, application software standards,... | |
| This guide presents an overview of User Organization Open System Environment (OSE) Profiles and their application. It is intended to assist users, planners, and implementers in developing User Organization OSE... | |
| This guide provides general information on the application and operation of separable connectors. It is intended to be basic, and supplement the manufacturer’s specific recommenda-tions and established utility practices. | |
| This IEEE 1014 standard specifies a high-performance backplane bus for use in microcomputer systems that employ single or multiple microprocessors. It is based on the VMEbus specification, released by the... | |
| This IEEE standard applies to rotating electric machinery which forms part of the propulsion and major auxiliary equipment on internally and externally powered electrically propelled rail and road vehicles. The... | |
| This IEEE standard covers recommended design practices and procedures for storage, location, mounting, ventilation, instrumentation, preassembly, assembly, and charging of valve-regulated lead-acid (VRLA) storage batteries. Recommended safety practices are also... | |
| This IEEE Standards product is part of the family on Software Engineering. Guidance for the development of the set of requirements, System Requirements Specification (SyRS), that will satisfy an expressed... | |
| This IEEE Standards product is part of the family on Software Engineering. The necessary information content and recommendations for an organization for Software Design Descriptions (SDDs) are described. An SDD... | |
| This International Standard provides a set of tools with which to implement a Futurebus+ architecture with performance and cost scalability over time, for multiple generations of single- and multiple-bus multiprocessor... | |
| This recommended practice covers the sizing of nickel-cadmium batteries used in standby operation for stationary applications. | |
| This recommended practice defines a file format suitable for exchanging power quality related measurement and simulation data in a vendor independent manner. The format is designed to represent all power... | |
| This Recommended Practice encompasses the monitoring of electrical characteristics of single-phase and polyphase ac power systems. It includes consistent descriptions of conducted electromagnetic phenomena occurring on power systems. The document... | |
| This Recommended Practice encompasses the monitoring of electrical characteristics of single-phase and polyphase ac power systems | |
| This recommended practice establishes requirements for a three-conductor round-type oil well cable used in supplying three-phase ac electric power to submersible pump motors. Cables meeting the requirements of the recommended... | |
| This recommended practice establishes requirements for a three-conductor round-type oil-well cable used in supplying three-phase ac electric power to submersible pump motors. Cables meeting the requirements of the recommended practice... | |
| This recommended practice is intended to assist users with the preparation of procurement specifications for electric-hydraulic speed governors. Remarks: Superseded by IEEE Std 125-2007 | |
| This recommended practice is intended to assist users with the preparation of procurement specifications for electric-hydraulic speed governors. | |
| This recommended practice is intended to serve in the preparation of standards that areprincipally concerned with the thermal endurance of EIM and simple combinations of suchmaterials, with the establishment of... | |
| This recommended practice is limited to maintenance, test schedules and testing procedures that can be used to optimize the life and performance of valve regulated lead-acid (VRLA) batteries for stationary... | |
| This recommended practice provides guidance for the installation and installation design of valve-regulated lead acid (VRLA) batteries. This recommended practice is intended for all standby stationary installations. However, specific applications,... | |
| This recommended practice provides guidance for the installation and installation designof valve-regulated lead acid (VRLA) batteries. This recommended practice is intended for all float-service stationary installations. However, specific applications, such... | |
| This recommended practice provides recommendations for installation design and for installation, maintenance, and testing procedures that can be used to optimize the life and performance of vented nickel-cadmium batteries used... | |
| This recommended practice provides recommendations for installation design and for installation, maintenance, and testing procedures that can be used to optimize the life and performance of vented nickel-cadmium batteries, including... | |
| This specification describes circuitry that may be added to an integrated circuit to provide access to on-chip Test Access Ports (TAPs) specified by IEEE Std 1149.1TM-2001. The circuitry uses IEEE... | |
| This standard applies to rotating electric machinery which forms part of the propulsion and major auxiliary equipment on internally and externally powered electrically propelled rail and road vehicles and similar... | |
| This standard applies to the measurement of bulk properties of high-purity germanium as they relate to the fabrication and performance of germanium detectors for gamma-rays and X-rays. Such germanium is... | |
| This standard covers the construction, mechanical, electrical and optical performance, installation guidelines, acceptance criteria, test requirements, and environmental considerations for an all-dielectric self-supporting fiber optic cable designed to be located... | |
| This standard covers the fundamental metrology for describing physical quantities of importance to frequency and time metrology. Quantities covered are frequency instability, phase instability, spectral densities, time instability variances, time... | |
| This standard covers the performance, test requirements, procedures, and acceptance criteria for a transmission line overhead ground wire (a.k.a. shield wire, static wire, earth wire, skywire) with optical fibers commonly... | |
| This standard defines a collection of VHDL 1076.1 packages, compatible with IEEE Std 1076.1TM-1999, along with recommendations for conforming use, in order to facilitate the interchange of simulation models of... | |
| This standard defines a standard operating system interface and environment, including a command interpreter (or "shell"), and common utility programs to support applications portability at the source code level. It... | |
| This standard defines a standard operating system interface and environment, including a command interpreter (or shell), and common utility programs to support applications portability at the source code level. It... | |
| This standard defines the IEEE 1076.1 language, a hardware description language for the description and the simulation of analog, digital, and mixed-signal systems. The language, also informally known as VHDL-AMS,... | |
| This standard defines the terms specifically related to the digital recorders used for monitoring high-voltage and high-current impulse tests, specifies the necessary performance characteristics for such digital recorders to ensure... | |
| This standard describes installation procedures for synchronous generators and generator/motors rated 5000 kVA and above, to be coupled to hydraulic turbines having vertical shafts. | |
| This standard describes software designs and establishes the information content and organization of a software design description (SDD). An SDD is a representation of a software design to be used... | |
| This standard establishes a connection-oriented transport profile and physical layer suitable for medical device communications that use short-range infrared wireless. This standard defines communications services and protocols that are consistent... | |
| This standard establishes fixed dimensions for end-caps in the interests of interchangeability of cryostats from various manufacturers. Seven standard diameters and five minimum lengths are specified for the cylindrical surface... | |
| This standard is concerned only with the reviews; it does not define procedures for determining the necessity of a review, nor does it specify the disposition of the results of... | |
| This standard is designed for use in conjunction with other documents such as the IEEE 1101 group of standards, the IEEE 896 group of standards, the IEEE 1596 group of... | |
| This standard is embodied in the Std_logic_1164 package declaration and the semantics of the Std_logic_1164 body. An annex is provided to suggest ways in which one might use this package. | |
| This standard is intended to be a basic or primary document that can be utilized and referenced by owners of ac motors and generators (machines) that need refurbishment, repair, and/or... | |
| This standard is part of the POSIX series of standardized profiles for open systems. It defines environment profiles for portable realtime and embedded applications. | |
| This standard is part of the POSIX series of standardized profiles for open systems. It defines environment profiles for portable realtime applications. | |
| This standard is part of the POSIX series of standards for applications and user inter-faces to open systems. It defines the applications interface to system services for spawning a process,... | |
| This standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines the Ada language bindings as package specifications and accompanying textual... | |
| This standard is part of the POSIX series of standards for applications and user interfaces to open systems. It defines the applications interface to system services for synchronization, memory management,... | |
| This standard is part of the POSIX series of standards. It defines an application program interface for controlling device drivers. Although it is based on the widely used ioctl() system... | |
| This standard is related to the POSIX¨ series of standards for applications and user interfaces to open systems. It specifies the set of standards and the requirements needed for portability... | |
| This standard is simultaneously ISO/IEC 9945, IEEE Std 1003.1, and forms the core of the Single Unix Specification, Version 3. This 2004 edition includes IEEE Std 1003.1-2001/Cor 1-2002 and IEEE... | |
| This standard provides a process for creating a software project life cycle process (SPLCP). It is primarily directed at the process architect for a given software project. (Replaced by ISO/IEC... | |
| This standard provides a standardized interface for accessing the system services of ISO/IEC 9945-1:1990 (IEEE Std 1003.1-1990, also know as POSIX.1), and support routines to access constructs not directly accessible... | |
| This standard provides a uniform approach to the classification of software anomalies, regardless of when they originate or when they are encountered within the project, product, or system lifecycle. Classification... | |
| This standard replaces IEEE Std 1073.3.2-2000. A connection-oriented transport profile and physical layer suitable for medical device communications in legacy devices is established. Communications services and protocols consistent with specifications... | |
| This standard specifies a serial, backplane, test and maintenance bus (MTM-Bus) that can be used to integrate modules form different teams or vendors into testable and maintainable subsystems. Physical, link,... | |
| This technical corrigendum addresses issues raised in defect reports and interpretation requests submitted up to the date of approval of this PAR by NESCOM, that meet all of the following... | |
| This Technical Corrigendum addresses problems discovered since the approval of IEEE Std 1003.1TM -2008. | |
| To correct technical omission/errors to IEEE Std 1015-2006Chapter 4 4.12 Normative referencesAnnex 7A (informative) MCCB or MCP data record 7A.6 TEST INSTRUCTIONS7A.6.2 PRIMARY CIRCUIT INSULATION RESISTANCE7A.6.2 j) 7A.6.2 k) | |
| Uniform and minimum requirements for the format and content of software verification and validation (V&V) tasks and their required inputs and outputs that are to be included in SVVPs are... | |
| Useful methods for the evaluation of systems of insulation for random-wound stators of rotating electric machines are given. The chief purpose is to classify insulation systems in accordance with their... | |
| Various battery systems are discussed so that the user can make informed decisions on selection, installation design, installation, maintenance, and testing of stationary standby batteries used in uninterruptible power supply... | |
| Verification and validation (V&V) processes are used to determine whether the development products of a given activity conform to the requirements of that activity and whether the product satisfies its... | |
| Version 1.0 of the Drive Management Protocol (DMP) IEEE standard is specified. The following areas are examined: application independent architecture, automated tape library, content neutral data model, device manager, distributed... | |
| VHSIC Hardware Description Language (VHDL) is defined. VHDL is a formal notation intended for use in all phases of the creation of electronic systems. Because it is both machine readable... | |
| VHSIC Hardware Description Language (VHDL) is defined. VHDL is a formal notationintended for use in all phases of the creation of electronic systems. Because it is both machine read-able and... | |
| Withdrawn Standard. A application program interface (API) to OSI directory services is defined in terms that are independent of any particular programming language. The interface, which supports applications portability at... | |
| Withdrawn Standard. Specifications for the subsystem bus of the IEC 821 BUS, referred to as the VSB, are set forth. VSB is a local subsystem extension bus that allows a... | |
| Withdrawn Standard. Withdrawn Date: Dec 09, 1997. No longer endorsed by the IEEE. Revision of IEEE Std 1017-1985 Procedures and test-voltage values for acceptance and maintenance testing of electrical submersible... | |
| Withdrawn Standard. Withdrawn Date: Feb 06, 2006. Alternate approaches to applying a digital control system, for both new construction and existing plant modernization projects, are described, and their advantages and... | |
| Withdrawn Standard. Withdrawn Date: Feb 06, 2006. Recommendations on hopper heating system performance and equipment requirements necessary to provide an economical and effective hopper heating system are presented. System characteristics... | |
| Withdrawn Standard. Withdrawn Date: Feb 07, 2003. No longer endorsed by the IEEE. The numerical characteristics of the 8x8 inverse discrete cosine transform (IDCT) for use in visual telephony and... | |
| Withdrawn Standard. Withdrawn Date: Jan 10, 2002. No longer endorsed by the IEEE. A set of standard procedures for determining and verifying the total losses of a high-voltage direct-current (HVDC)... | |
| Withdrawn Standard. Withdrawn Date: Jan 10, 2002. No longer endorsed by the IEEE. This IEEE Standards product is part of the family on Software Engineering. Reference models for tool-to-organization interconnections,... | |
| Withdrawn Standard. Withdrawn Date: Jan 10, 2002. Recommended procedures and specifications for qualification tests that are structured to evaluate terrestrial flat-plate photovoltaic non-concentrating modules intended for power generation applications are... | |
| Withdrawn Standard. Withdrawn Date: Jan 15, 2001. Firmware is the read-only-memory (ROM)-based software that controls a computer between the time it is turned on and the time the primary operating... | |
| Withdrawn Standard. Withdrawn Date: Jan 15, 2001. No longer endorsed by the IEEE. The mechanical design requirements for a military module, format E form factor are established. The specificaitons of... | |
| Withdrawn Standard. Withdrawn Date: Jan 15, 2001. No longer endorsed by the IEEE. The mechanical design requirements for conduction-cooled and air-cooled modules of the 10SU by 6.375 in (161.9 mm)... | |
| Withdrawn Standard. Withdrawn Date: Jan 15, 2001. Selected topics covered in IEEE Std 1074-1995, IEEE Standard for Developing Software Life Cycle Processes, are addressed in this guide. The guide provides... | |
| Withdrawn Standard. Withdrawn Date: Jan 15, 2001. The design requirements for a module designated for use in spacecraft, boosters, and other highly rugged, conductively cooled environments are established in this... | |
| Withdrawn Standard. Withdrawn Date: Mar 06, 2000. A C language Application Program Interface (API) to the OSI File Transfer, Access, and Management (FTAM) protocol is defined. The functions of the... | |
| Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. A simple, high-performance (37.5 Mbyte/s) backplane bus that provides the functions required by multiprocessor systems is defined. | |
| Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. The application of design methods and design documentation recommended in IEEE Std 1016-1987 is described. Several common... | |
| Withdrawn Standard. Withdrawn Date: May 01, 2000. The logical protocol layer for bridging between a Futurebus+ system and a VME64 system in a tightly coupled fashion is defined. Transferring of... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of communication between personal telehealth glucose meter devices and compute engines (e.g., cell phones,... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of communication between personal telehealth insulin pump devices and compute engines (e.g., cell phones,... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of communication between personal telehealth urine analyzer devices and compute engines (e.g., cell phones,... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of communication is established in this standard between personal telehealth peak expiratory flow monitor... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of the communication between continuous glucose monitor (CGM) devices and managers (e.g., cell phones,... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of the communication between personal basic electrocardiograph (ECG) devices and managers (e.g., cell phones,... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of the communication between sleep apnoea breathing therapy equipment (SABTE) devices (agents) and managers... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, the landscape of transport-independen t applications and information profiles for personal telehealth devices is described in this... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard defines a common framework for making an abstract model of personal health data available in... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth blood pressure monitor devices and compute... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth cardiovascular fitness and activity monitor devices... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth glucose meter devices and compute engines... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth independent living activity hub devices and... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth medication monitor devices and compute engines... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth pulse oximetry devices and compute engines... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth thermometer devices and compute engines (e.g.,... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth weighing scale devices and compute engines... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between personal body composition analyzing devices and managers... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between personal strength fitness devices and managers (e.g.,... | |
| Within the context of the ISO/IEEE 11073 family of standards for point-of-care (POC) and personal health devices (PHD) medical device communication (MDC), this standard provides the nomenclature that supports both... | |
| Within the context of the ISO/IEEE 11073 family of standards for point-of-care (POC) medical device communication (MDC), the nomenclature defined by the base ISO/IEEE 11073-10101:2004 nomenclature standard is extended by... | |
| Within the context of the ISO/IEEE 11073 family of standards for point-of-care (POC) medical device communication (MDC), this standard provides an abstract object-oriented domain information model that specifies the structure... | |
| Within the context of the ISO/IEEE 11073 family of standards for point-of-care (PoC) medical device communication, a communication protocol specification for a distributed system of PoC medical devices and medical... | |
| Within the context of the ISO/IEEE 11073 family of standards for point-of-care (PoC) medical device communication, an architecture for service-oriented distributed PoC medical devices and medical IT systems is defined. | |
| Within the context of the ISO/IEEE 11073 family of standards for point-of-care (PoC)medical device communication, a communication protocol specification for a distributed system of PoC medical devices and medical IT... | |
| Within the context of the ISO/IEEE 11073 family of standards for point-of-care medical device communication, an abstract, object-oriented domain information model that specifies the structure of exchanged information, as well... | |
| Within the context of the ISO/IEEE 11073™ family of standards for point-of-care medical device communication, a Participant Model derived from the ISO/IEEE11073-10201 Domain Information Model is provided in this standard. |
| Next >> |