The Series CL500 molded-in compression limiter is produced from low carbon steel with a butted seam to prevent plastic entry during molding and features radial grooves for axial retention. It is rated for use up to ISO Class 8.8/Grade 5 bolts. Available in inch dimensions for nominal bolt sizes #10, 1/4, and 5/16, with minimum inner diameters of 0.221 in, 0.281 in, and 0.344 in, respectively. Wall thicknesses are 0.043 in, 0.059 in, and 0.078 in. Maximum outer diameters are 0.323 in, 0.417 in, and 0.518 in. Length tolerances are 0.006 in for #10 and 1/4, and 0.008 in for 5/16. The limiter is designed for molding into plastic assemblies using standard core pins and is zinc plated with a trivalent finish.
The Series CL500 is produced from low carbon steel with a butted seam to prevent plastic from entering the inner diameter of the Compression Limiter during the molding process. This also provides an anti-rotation feature once in the assembly. The radial grooves provide axial retention. The CL500 is rated for use up to ISO Class 8.8/Grade 5 bolts.
| SPIROL | |
|---|---|
| Product Category | Compression Limiters |
| Product Number | Series CL500 - Inch |
| Product Name | Molded-In Compression Limiters |
| Insertion Type | Over-molded |