Extreme Engineering Solutions, Inc. (X-ES) PMC I/O Module (PIM) with Gigabit Ethernet, SATA, USB, Serial, and Mini DisplayPort XIt2501

The XIt2501 is a PMC I/O Module (PIM), per the VITA 36 specification, which supports various X-ES XMC/PrPMC products. When installed on the appropriate carrier, such as the XTend3100 or XIt1003, the XIt2501 routes I/O signals from an associated XMC/PrPMC’s rear panel P14 and P16 connectors to allow connection of these signals to external equipment. The XIt2501 breaks out 10/100/1000BASE-T Ethernet, RS-232 serial, SATA, USB, and video signals to the appropriate connectors located on the front panel and rear surface of the card. Features XIM/PIM module Two 10/100/1000BASE-T Ethernet ports to RJ-45 connectors Two RS-232 serial ports to micro-DB-9 connectors Four USB 2.0 ports Two SATA ports Mini DisplayPort interface Technical Specs Ethernet Two 10/100/1000BASE-T Ethernet ports to RJ-45 connectors Serial Two RS-232 serial ports to micro-DB-9 connectors RS-422/485 conversion (optional) SATA Two SATA ports to internal vertical SATA connectors USB One USB 2.0 port to front panel Type Mini-AB connector Three USB 2.0 ports to internal vertical Type A connectors Video One Dual-Mode DisplayPort interface to Mini DisplayPort connector Physical Characteristics PMC I/O Module (VITA 36) Dimensions: 74 mm x 69 mm Environmental Requirements Contact factory for appropriate board configuration based on environmental requirements. Supported ruggedization levels (see the X-ES Ruggedization Chart): 1 Conformal coating available as an ordering option