The WG A0 series consists of solid state relays for motor reversing, featuring a back-to-back SCR output with an internal snubber and DC input control. Housed in a maxi puck case with a glass-filled polyester enclosure and nickel-plated aluminum base, they weigh approximately 430 g and use M3.5 input and M4 output terminals. Load voltage ranges from 48 to 660 VAC, with load currents up to 45 A and peak off-state voltages of 1200 V or 1600 V. Turn-on time is 6 ms, turn-off time is 11 ms, and interlocking delay is 40 to 80 ms. Isolation between input and output is 4000 V, operating temperature is -20 to +80 °C, and the internal snubber is 47 Ω and 10 nF. Line frequency range is 47 to 63 Hz.
Maxi Puck Housing, Panel Mounted
AC Loads, DC Input, Motor Reversing
This series is recommended for electronic motor reversing in three phase systems. Load voltages up to 480 Vac and load currents up to 45 A can be switched. A built-in interlocking circuit with a typical change over switching time 60 +/-20ms prevents simultaneous switching-on of forward and reverse functions and prevents a short circuit between two phases. A LED indicates the forward and reverse function.
| Comus International | |
|---|---|
| Product Category | Solid State Relays |
| Product Number | WG A0 |
| Product Name | Relays, Solid State Relays |