Safeguard Technology, Inc. Anti-Slip Walkway Covers Vinyl (Flexible PVC)

The Superior Alternative to Anti-Slip Tapes! SAFEGUARD Vinyl (Flexible PVC) Walkway Covers are the lightweight, semi- flexible, “Peel-and-Stick” solution for eliminating Slips and Falls. SAFEGUARD Vinyl (Flexible PVC) Walkway Covers are a lightweight, semi-flexible, “Peel-and-Stick” alternative to our rigid FRP and steel based products. As with all Safeguard Covers, Vinyl Walkway Covers exhibit a superior coefficient of friction that exceeds both OSHA & ADA recommended levels. Installation Each Cover comes standard with an Adhesive Transfer Tape laminate and mylar lm backing. Simply remove the mylar and press into place for a quick, clean installation. Vinyl Walkway Covers are available without Pressure Sensitive Adhesive (PSA); however, care must be taken to choose a proper adhesive speci cally designed to bond with vinyl. Sizes Vinyl Walkways come in sheet form with a maximum size of 48” x 48” and a minimum of 4” x 4”. Choose from four grades of grit; Super Fine (Barefoot) to Coarse (Industrial). Extra Coarse (O shore) and Super Coarse (Extreme) grades are not available on Safeguard Vinyl Walkway Covers. Colors Available in all Safeguard Standard, Premium, and Glo Colors as well as two-tone con gurations. Applications Safeguard recommends installation over smooth surfaces such as steel, smooth concrete or painted surfaces. Wood is also an option however, prior testing may be necessary to ensure the chemicals in the wood do not inhibit the bond with the PSA. The Covers are not designed for extreme angles of 90° such as steps, but have limited exibility allowing for installation over curved surfaces such as tank tops, wheel wells or any surface that is not completely at or have a slight radius.