The NPS4053 is a 5.5 V, 55 mΩ load switch with precision adjustable current limit from 110 mA to 2.5 A. It operates from 2.5 V to 5.5 V, with a maximum continuous current of 2 A and an ON resistance of 55 mΩ at 5.5 V, 65 mΩ at 3.6 V, and 80 mΩ at 2.5 V. It is available in the SOT457 (TSOP6) package, specified from -40 °C to +125 °C, with UL 62368 recognition and ESD protection per HBM (2000 V), CDM (500 V), IEC 61000-4-2 contact (8000 V), and air-gap (15000 V) standards. An external resistor connected to the ILIM pin sets the current limit, and a minimum 120 μF output capacitor is recommended for USB applications. Active reverse voltage protection, constant current limiting, built-in soft start, and an active-low FLG pin for fault indication are included.
The NPS4053 is a 5.5 V, 55 mΩ load switch with precision adjustable current limit from 110 mA to 2.5 A.
The NPS4053 switch limits the output current to a constant current by using a constant-current mode when the output load exceeds the current limit threshold or shorted. An internal voltage comparator disables the load switch when the output voltage is higher than the input to protect devices on the input side of the switch. The FLG pin is an active low output to indicate overcurrent, over temperature and reverse voltage conditions.
Features and benefits
Applications
Note: Connect at least 120 µF capacitor at output for USB port application, other applications except USB choose output capacitor according to actual transient requirements.
| Nexperia B.V. | |
|---|---|
| Product Category | Disconnect Switches |
| Product Number | NPS4053GVH |
| Product Name | 5.5 V, 55 mOhm load switch with precision adjustable current limit |
| Approvals | RoHS |