The ESS water heater is a packaged system designed to deliver tepid water to emergency safety showers and eyewash stations in compliance with ANSI Z358.1-2014. It features a 119-gallon carbon steel tank internally lined with 1/2-inch Hydrastone cement, 3-inch thick polyurethane foam insulation, and a high-impact composite jacket. The system integrates a triple redundant, thermostatic pressure-balanced mixing valve with a Cv rating of 10.0, maintaining a constant 85°F output regardless of inlet variations, and delivers up to 23 GPM for simultaneous shower and eyewash use. The unit operates at 120-600 volts, single- or three-phase, and is factory-piped and wired for immediate installation. It includes a dial pressure and temperature gauge, ASME-rated T&P relief valve, and automatic air vent. The tank carries a five-year non-pro-rated warranty, with a ten-year option available.
The ESS water heater is a packaged system designed to meet the requirements of ANSI Z358.1-2014 for tepid water delivery to an emergency drench system. This heavy-duty water heater is constructed of a carbon steel tank and internally lined with 1/2″ thick Hydrastone cement to ensure tank longevity when operating at elevated temperatures, and is fully insulated with 3″ thick polyurethane foam to minimize stand-by heat loss.
The ESS water heater is packaged with our Therm-O-Mix®/WWM specifically designed, tested and proven for use in emergency safety shower/face/eyewash applications.
When you specify and install an ESS, you will have the confidence in knowing that the owner will be provided with a long lasting, safe and dependable source of tepid water for their emergency drench system needs.
| ThermOmegaTech® | |
|---|---|
| Product Category | Electric Heaters |
| Product Number | ESS |
| Product Name | Emergency Safety Shower Water Heater |
| Heater Type | Water Heaters |
| Sleeve (Sheath) Material | Copper; Steel; Hydrastone Cement Lined Steel |
| Insulation Options | 3" Thick Polyurethane Foam |
