Nanmac Corporation Multi-Pair Thermocouple Cable

Description
Multi-pair extension cables are available for thermocouple calibration types E, J, K, N & T. Each conductor is covered with a polyvinyl chloride (PVC) jacket having a nominal thickness of 0.015 inch. Pairs are individually twisted to reduce magnetic interference. The twisted pairs are cabled and then shielded with a 0.0015 inch think aluminum-backed mylar tape and a #20 gage stranded copper drain wire to further minimize electromagnetic interference. The cable is then covered with an outer layer of PVC about 0.045 inch thick. A heavy, easy-strip nylon thread is included. Each cable also contains a polyvinyl- clad #20 gage copper wire for use as a signal connection. Cables are color coded on the individual conductors and overall. The individual pairs are marked for easy identification. note Temlaerature {ating of this cable is based upon the limits of the PVC insulation. The continuous use limit of this cable is 176 degrees Fahrenheit (80 degrees Celsius). Volume discounts apply on quantities over 500 feet. All multi-pair cable is supplied to your specified length, plus/minus 10 percent. For special multi-pair cables with other calibrations, other insulations, metallic overbraid etc. contact factory. Maximum continuous length is 300 feet. For longer lengths consult factory.
Description
Multi-pair extension cables are available for thermocouple calibration types E, J, K, N & T. Each conductor is covered with a polyvinyl chloride (PVC) jacket having a nominal thickness of 0.015 inch. Pairs are individually twisted to reduce magnetic interference. The twisted pairs are cabled and then shielded with a 0.0015 inch think aluminum-backed mylar tape and a #20 gage stranded copper drain wire to further minimize electromagnetic interference. The cable is then covered with an outer layer of PVC about 0.045 inch thick. A heavy, easy-strip nylon thread is included. Each cable also contains a polyvinyl- clad #20 gage copper wire for use as a signal connection. Cables are color coded on the individual conductors and overall. The individual pairs are marked for easy identification. note Temlaerature {ating of this cable is based upon the limits of the PVC insulation. The continuous use limit of this cable is 176 degrees Fahrenheit (80 degrees Celsius). Volume discounts apply on quantities over 500 feet. All multi-pair cable is supplied to your specified length, plus/minus 10 percent. For special multi-pair cables with other calibrations, other insulations, metallic overbraid etc. contact factory. Maximum continuous length is 300 feet. For longer lengths consult factory.

Suppliers

Company
Product
Description
Supplier Links
Multi-Pair Thermocouple Cable -  - Nanmac Corporation
Marlborough, MA, United States
Multi-Pair Thermocouple Cable
Multi-Pair Thermocouple Cable
Multi-pair extension cables are available for thermocouple calibration types E, J, K, N & T. Each conductor is covered with a polyvinyl chloride (PVC) jacket having a nominal thickness of 0.015 inch. Pairs are individually twisted to reduce magnetic interference. The twisted pairs are cabled and then shielded with a 0.0015 inch think aluminum-backed mylar tape and a #20 gage stranded copper drain wire to further minimize electromagnetic interference. The cable is then covered with an outer layer of PVC about 0.045 inch thick. A heavy, easy-strip nylon thread is included. Each cable also contains a polyvinyl- clad #20 gage copper wire for use as a signal connection. Cables are color coded on the individual conductors and overall. The individual pairs are marked for easy identification. note Temlaerature {ating of this cable is based upon the limits of the PVC insulation. The continuous use limit of this cable is 176 degrees Fahrenheit (80 degrees Celsius). Volume discounts apply on quantities over 500 feet. All multi-pair cable is supplied to your specified length, plus/minus 10 percent. For special multi-pair cables with other calibrations, other insulations, metallic overbraid etc. contact factory. Maximum continuous length is 300 feet. For longer lengths consult factory.

Multi-pair extension cables are available for thermocouple calibration types E, J, K, N & T. Each conductor is covered with a polyvinyl chloride (PVC) jacket having a nominal thickness of 0.015 inch. Pairs are individually twisted to reduce magnetic interference. The twisted pairs are cabled and then shielded with a 0.0015 inch think aluminum-backed mylar tape and a #20 gage stranded copper drain wire to further minimize electromagnetic interference. The cable is then covered with an outer layer of PVC about 0.045 inch thick. A heavy, easy-strip nylon thread is included. Each cable also contains a polyvinyl- clad #20 gage copper wire for use as a signal connection. Cables are color coded on the individual conductors and overall. The individual pairs are marked for easy identification.


    note
  • Temlaerature {ating of this cable is based upon the limits of the PVC insulation. The continuous use limit of this cable is 176 degrees Fahrenheit (80 degrees Celsius).
  • Volume discounts apply on quantities over 500 feet.
  • All multi-pair cable is supplied to your specified length, plus/minus 10 percent.
  • For special multi-pair cables with other calibrations, other insulations, metallic overbraid etc. contact factory.
  • Maximum continuous length is 300 feet. For longer lengths consult factory.
Supplier's Site

Technical Specifications

  Nanmac Corporation
Product Category Cable Assemblies
Product Name Multi-Pair Thermocouple Cable
Unlock Full Specs
to access all available technical data

Similar Products

Ivecon 30pin to OBD 2 female cables - QLC16084 - QL-Custom Technology Limited
Specs
Application Automotive
View Details
Pp Staple 1 X 3 Rohs Compliant Anderson Power Products - 12P9346 - Newark, An Avnet Company
Specs
Application Power Cable
Standards / Certifications RoHS
View Details
Mini-SAS - 10111837-P050001LF - Amphenol Communications Solutions
Amphenol Communications Solutions
Specs
Cable Length 16.4 ft (50 dm)
Connector Type Cable Assembly
Rated Temperature -20 to 85 C (-4 to 185 F)
View Details
Ethernet Cable - 102562 - RS Components, Ltd.
RS Components, Ltd.
Specs
Application LAN / Ethernet; Networking
Cable Type Cat 6; Coaxial
Cable Shielding UTP
View Details